Most common failures | No# failures |
---|
Headlamp aim out of alignment | 142 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 128 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 121 |
Brake hose excessively deteriorated | 58 |
Windscreen wiper does not clear the windscreen effectively | 55 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 49 |
Brake pipe excessively corroded | 39 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 36 |
Registration plate lamp issues | 27 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 27 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 24 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 24 |
Parking brake: efficiency below requirements |3.7.B.7| | 24 |
Brakes imbalanced across an axle | 24 |
Offside Stop lamp not working |1.2.1b| | 24 |
Registration plate issues | 23 |
Rear parking brake recording little or no effort | 23 |
Nearside Stop lamp not working |1.2.1b| | 20 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 19 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 18 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 17 |
Offside Steering rack gaiter split |2.2.D.2d| | 16 |
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 16 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 16 |
Exhaust has a major leak of exhaust gases |7.1.2| | 16 |
Service brake: efficiency below requirements |3.7.B.7| | 15 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 15 |
Rear Exhaust system not adequately supported |7.1.1| | 15 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 15 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 15 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 14 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 14 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 13 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 12 |
Nearside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 12 |
Offside Rear fog lamp not working |1.3.2b| | 12 |
Offside rear brake recording little or no effort |3.7.B.5a| | 12 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 12 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 12 |
Offside front brake binding |3.7.B.1| | 12 |
Rear brake application uneven | 12 |
Horn not working |1.6.2a| | 11 |
Offside Headlamp not working on main beam |1.7.5a| | 11 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 11 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 11 |
Nearside front brake binding |3.7.B.1| | 11 |
Offside Headlamp not working on dipped beam |1.7.5a| | 10 |
Offside Rear wheel bearing rough when rotated |2.6.1| | 10 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 10 |
Offside Front position lamp|s| not working |1.1.A.3b| | 10 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 10 |
Rear brake binding | 10 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 10 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 10 |
Rear fog lamp switch faulty |1.3.1a| | 10 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 10 |
Offside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 9 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 9 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 9 |
Nearside Side repeater not working |1.4.A.2c| | 8 |
Offside Side repeater not working |1.4.A.2c| | 8 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 8 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 8 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 8 |
Nearside Rear Seat belt retracting mechanism defective |5.2.5b| | 8 |
Nearside Rear Stop lamp not working |1.2.1b| | 8 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 8 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 7 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 7 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 7 |
Mechanical brake component has restricted free movement | 7 |
Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 6 |
Nearside Rear Trailing arm corroded and seriously weakened |2.4.G.1| | 6 |
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 6 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 6 |
Rear fog lamp not working |1.3.2b| | 6 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 6 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 6 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 6 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 6 |
Offside Front front brake binding |3.7.B.1| | 6 |
Offside Headlamp insecure |1.7.3| | 6 |
Offside Rear Rear fog lamp not working |1.3.2b| | 6 |
Nearside Headlamp not working on main beam |1.7.5a| | 6 |
Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Offside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Offside Rear Trailing arm corroded and seriously weakened |2.4.G.1| | 5 |
Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 5 |
Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 5 |
Rear Mechanical brake component has restricted free movement | 5 |
Exhaust engine idle speed too high |7.3.A.2a| | 5 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 5 |
Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 5 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 5 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 5 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 5 |
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 5 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 5 |
Battery insecure |1.9.1| | 5 |
Rear fog lamp tell tale not working |1.3.1b| | 5 |
Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 4 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 4 |
Brake performance not tested |3.7.A.1| | 4 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 4 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 4 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 4 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 4 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 4 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Offside Rear Stop lamp not working |1.2.1b| | 4 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 4 |
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 4 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Windscreen washer not working | 3 |
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 3 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 3 |
Offside Rear Braking system leaking |3.6.A.1| | 3 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 3 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 3 |
Offside Front Headlamp not working on main beam |1.7.5a| | 3 |
Rear Rear fog lamp not working |1.3.2b| | 3 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 3 |
Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Headlamp insecure |1.7.3| | 3 |
Windscreen wiper blade insecure | 3 |
Exhaust system not adequately supported |7.1.1| | 3 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 3 |
Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 3 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Steering rack gaiter split |2.2.D.2d| | 3 |
Centre Exhaust system not adequately supported |7.1.1| | 3 |
Nearside Front Side repeater not working |1.4.A.2c| | 3 |
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 3 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 3 |
Offside Rear wheel bearing has excessive play |2.6.2| | 3 |
Offside Front constant velocity joint is insecure |2.5.C.1b| | 3 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 3 |
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Front Exhaust system not adequately supported |7.1.1| | 3 |
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Outer Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Brake hose damaged | 3 |
Nearside Front front brake binding |3.7.B.1| | 3 |
Front brake application uneven | 3 |
Nearside Front Service brake excessively binding |1.2.1 |f|| | 3 |
Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 2 |
Offside Headlamp aim not tested |1.8.A.1c| | 2 |
Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
Nearside Rear Braking system leaking |3.6.A.1| | 2 |
Nearside Rear wheel cylinder leaking |3.6.A.1| | 2 |
Offside Front brake disc excessively pitted |3.5.1h| | 2 |
Nearside Front Front drive shaft coupling flexible rubber or fabric coupling unit breaking up |2.5.C.1d| | 2 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
Offside Rear Service brake excessively binding |1.2.1 |f|| | 2 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 2 |
Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 2 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
Suspension arm corroded and seriously weakened |2.4.G.1| | 2 |
front brake binding |3.7.B.1| | 2 |
Offside Front Brake pedal does not operate a brake fitted to each wheel |3.3.A.3| | 2 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 2 |
Nearside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 2 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 2 |
Offside Rear Rear wheel bearing has excessive play |2.6.2| | 2 |
Offside Front Direction indicator incorrect colour |1.4.A.2f| | 2 |
Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 2 |
Offside Rear Lower Suspension arm corroded and seriously weakened |2.4.G.1| | 2 |
Nearside Rear Lower Suspension arm corroded and seriously weakened |2.4.G.1| | 2 |
Offside Rear Upper Shock absorber detached |2.7.2b| | 2 |
Nearside Front brake disc excessively pitted |3.5.1h| | 2 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 2 |
Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Rear Body has a sharp edge caused by damage |6.1.C.1| | 2 |
Offside Front Steering locking device missing |2.2.C.1g| | 2 |
Nearside Front Direction indicator incomplete |1.5.A1b| | 2 |
Nearside Rear Direction indicator incomplete |1.5.A1b| | 2 |
Offside Rear Radius arm corroded and seriously weakened |2.4.G.1| | 2 |
Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Windscreen has damage | 2 |
Nearside Outer Front Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Rear Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 2 |
Rear Exhaust mounting missing |7.1.1b| | 2 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
Offside Front Front drive shaft coupling flexible rubber or fabric coupling unit breaking up |2.5.C.1d| | 2 |
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 2 |
Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 2 |
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Nearside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Front Direction indicator not working |1.4.A.2c| | 2 |
Offside Front Brake hose excessively damaged |3.6.B.4d| | 2 |
Offside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 2 |
Nearside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Body has a sharp edge caused by damage |6.1.C.1| | 2 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 2 |
rear brakes release unevenly |3.7.B.4| | 2 |
Offside Body has a sharp edge caused by damage |6.1.C.1| | 2 |
Nearside Front Direction indicator not working |1.4.A.2c| | 2 |
Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside front brake recording little or no effort |3.7.B.5a| | 2 |