Most common failures | No# failures |
---|
Brake pipe excessively corroded | 169 |
Headlamp aim out of alignment | 86 |
Windscreen wiper does not clear the windscreen effectively | 81 |
Registration plate lamp issues | 65 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 50 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 44 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 43 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 42 |
Registration plate issues | 38 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 32 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 29 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 26 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 25 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 24 |
Offside Front position lamp|s| not working |1.1.A.3b| | 23 |
Parking brake: efficiency below requirements |3.7.B.7| | 22 |
Brakes imbalanced across an axle | 22 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 18 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 18 |
Exhaust has a major leak of exhaust gases |7.1.2| | 18 |
Nearside Stop lamp not working |1.2.1b| | 18 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 17 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 17 |
Offside Rear fog lamp not working |1.3.2b| | 15 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 15 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 15 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 15 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 15 |
Offside Stop lamp not working |1.2.1b| | 14 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 12 |
Windscreen has damage | 12 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 12 |
Nearside Front Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 12 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 12 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 12 |
Front Exhaust system not adequately supported |7.1.1| | 12 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 11 |
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 11 |
Rear brake application uneven | 11 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 11 |
Brake hose excessively deteriorated | 10 |
Service brake: efficiency below requirements |3.7.B.7| | 10 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 9 |
Rear parking brake recording little or no effort | 9 |
Rear Exhaust system not adequately supported |7.1.1| | 9 |
Offside Headlamp not working on dipped beam |1.7.5a| | 8 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 8 |
Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 8 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 8 |
Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 8 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 8 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 7 |
Offside Rear wheel bearing has excessive play |2.6.2| | 7 |
Nearside Rear Stop lamp not working |1.2.1b| | 7 |
Emissions not tested |7.0| | 7 |
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 7 |
Offside Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 7 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
Nearside Headlamp not working on main beam |1.7.5a| | 7 |
Offside Rear Rear wheel bearing has excessive play |2.6.2| | 6 |
Windscreen wiper blade insecure | 6 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Nearside Steering rack gaiter split |2.2.D.2d| | 6 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 6 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Mechanical brake component has restricted free movement | 6 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 5 |
Offside Rear Shock absorber has negligible damping effect |2.7.5| | 5 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 5 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 5 |
Offside Steering rack gaiter split |2.2.D.2d| | 5 |
Front Exhaust mounting missing |7.1.1b| | 5 |
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Parking brake lever has no reserve travel |3.1.6b| | 5 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 5 |
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 5 |
Nearside Front Anti-roll bar attachment bracket/mounting cracked |2.4.G.1| | 5 |
Nearside Front front brake binding |3.7.B.1| | 5 |
Offside Front front brake binding |3.7.B.1| | 5 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 5 |
Rear brake binding | 5 |
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 5 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 5 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 5 |
Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 5 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 5 |
Offside Front Headlamp not working on main beam |1.7.5a| | 4 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 4 |
Front brake disc in such a condition that it is seriously weakened | 4 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 4 |
Offside Rear wheel bearing rough when rotated |2.6.1| | 4 |
Offside Headlamp not working on main beam |1.7.5a| | 4 |
Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 4 |
Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 4 |
Fuel tank leaking |7.2.3| | 4 |
Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 4 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 4 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 4 |
Headlamp switch faulty |1.7.1| | 4 |
Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 4 |
Offside Front Direction indicator not working |1.4.A.2c| | 4 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 4 |
Offside front brake binding |3.7.B.1| | 4 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 4 |
Stop lamp not working |1.2.1b| | 4 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 4 |
Offside Outer Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 3 |
Rear Exhaust mounting missing |7.1.1b| | 3 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 3 |
Exhaust engine idle speed too high |7.3.A.2a| | 3 |
Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Exhaust system not adequately supported |7.1.1| | 3 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 3 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 3 |
Horn not working |1.6.2a| | 3 |
Nearside Rear Macpherson strut corroded and seriously weakened |2.4.G.1| | 3 |
Offside rear brake recording little or no effort |3.7.B.5a| | 3 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 3 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 3 |
Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 3 |
Centre Front Exhaust system not adequately supported |7.1.1| | 3 |
Rear Rear fog lamp not working |1.3.2b| | 3 |
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Nearside Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 3 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 3 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Brake performance not tested |3.7.A.1| | 3 |
Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Front brake application uneven | 3 |
Nearside front brake binding |3.7.B.1| | 3 |
Nearside Rear Brake pipe leaking |3.6.A.1| | 3 |