MOT History from tests of petrol MZ ETZ125s year 1990

Review the list of common MZ ETZ125 failures below or to perform a specific mot history check on your MZ then use our popular KnowYourCar service

mot history

Pass percent:82.52%

(The average a petrol MZ ETZ125 year 1990 passes without issue)

Based on:143 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	5
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	4
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	4
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2
Horn not working \|1.7.3a\|	2
Front suspension has inadequate damping effect. \|2.3.6c\|	2
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Offside Rear Direction indicator not working \|1.5.1c\|	1
Fuel cap sealing washer missing \|7.2.2c\|	1
Front Brake master cylinder leaking hydraulic fluid \|3.2.B1e\|	1
Stop lamp remains on when the brake is released \|1.3.1e\|	1
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Nearside Rear Footrest missing \|6.2.1a\|	1
Registration plate issues	1
Headlamp insecure \|1.2.3b\|	1
Direction indicator missing \|1.5.1a\|	1
Nearside Rear Footrest insecure \|6.2.1a\|	1
Exhaust mounting missing \|7.1.1c\|	1
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Fuel cap sealing washer deteriorated \|7.2.2c\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Brake disc\|s\| friction surface contaminated by oil or grease Front \|3.2.A1k\|	1
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Nearside Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Offside Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	1
Offside Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Brake hose excessively deteriorated	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Front Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Brake cylinder leaking hydraulic fluid \|3.2.B1e\|	1
Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	1
Throttle operating incorrectly \|6.2.1f\|	1
Front Direction indicator affected by the operation of another lamp \|1.5.1c\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	5
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	4
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	4
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2
Horn not working \|1.7.3a\|	2
Front suspension has inadequate damping effect. \|2.3.6c\|	2
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Offside Rear Direction indicator not working \|1.5.1c\|	1
Fuel cap sealing washer missing \|7.2.2c\|	1
Front Brake master cylinder leaking hydraulic fluid \|3.2.B1e\|	1
Stop lamp remains on when the brake is released \|1.3.1e\|	1
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Nearside Rear Footrest missing \|6.2.1a\|	1
Registration plate issues	1
Headlamp insecure \|1.2.3b\|	1
Direction indicator missing \|1.5.1a\|	1
Nearside Rear Footrest insecure \|6.2.1a\|	1
Exhaust mounting missing \|7.1.1c\|	1
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Fuel cap sealing washer deteriorated \|7.2.2c\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Brake disc\|s\| friction surface contaminated by oil or grease Front \|3.2.A1k\|	1
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Nearside Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Offside Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	1
Offside Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Brake hose excessively deteriorated	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Front Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Brake cylinder leaking hydraulic fluid \|3.2.B1e\|	1
Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	1
Throttle operating incorrectly \|6.2.1f\|	1
Front Direction indicator affected by the operation of another lamp \|1.5.1c\|	1

MOT History from tests of petrol MZ ETZ125s year 1990

Find us on Facebook