Most common failures | No# failures |
---|
Registration plate issues | 38 |
Rear reflector on motorcycle missing |1.4.1| | 26 |
Headlamp aim out of alignment | 18 |
Rear reflector missing (4.8.2 (a) (ii)) | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 5 |
Offside Front Direction indicator not working |1.5.1c| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Centre Rear reflector on motorcycle missing |1.4.1| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Central Rear Upper Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Central Rear Upper Position lamp not working |4.2.1 |a|| | 1 |
Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Offside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Nearside Rear Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
Offside Rear Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Brake cylinder leaking (1.1.16 (b) (i)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Steering control fouling between components which interferes with the free movement of the steering clutch master cylinder fouls fairing on left lock |2.1.2a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |
Footrest missing pillion footrests missing |6.2.1a| | 1 |
Rear position lamp adversely affected by the operation of another lamp integrated indicators extiguish tail lamp when operating |1.1.3b| | 1 |
Stop lamp affected by the operation of another lamp integrated indicators extiguish stop lamp when operating |1.3.2| | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Front Shock absorber has a serious fluid leak both (5.3.2 (b)) | 1 |
Centre Front Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Centre Rear Vehicle identification number has more than one different number displayed |6.3.5b| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Stop lamp not working Front brake (4.3.1 (a) (ii)) | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |