| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 12 |
| Rear reflector on motorcycle missing |1.4.1| | 10 |
| Registration plate issues | 7 |
| Registration plate lamp issues | 6 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Central Front Upper Headlamp aim not tested No Dip Beam (4.1.2 (b)) | 1 |
| Central Front Upper Headlamp not working on dipped beam No Dip Beam (4.1.1 (a) (ii)) | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Exhaust markings indicating not for road use or similar wording (6.1.2 (c)) | 1 |
| Headlamp lens seriously defective mesh tape on lens (4.1.1 (b) (ii)) | 1 |
| Front Brake grabbing severely (1.2.1 (c)) | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Drive chain sprocket excessively loose Nearside axle nut loose (6.1.7 (c) (i)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Rear brake disc in such a condition that it is seriously weakened | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Brake component inadequately mounted (1.1.21 (c)) | 1 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Offside Direction indicators not working |1.5.1c| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Rear Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
| Rear Motorcycle structure joining/attachment plate or fastening insecure rear number plate bracket loose (6.1.1 (b) (i)) | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Front Fuel cap ineffective wont lock |6.1.3 |b| |i|| | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Position lamp not working no high beam |4.2.1 |a|| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on reg plate light |1.1.3a| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Stop lamp remains on when the brakes are released | 1 |