>

MOT History from tests of petrol MOTOR HISPANIA RX50s year 2004

Review the list of common MOTOR HISPANIA RX50 failures below or to perform a specific mot history check on your MOTOR HISPANIA then use our popular KnowYourCar service

mot history
Pass percent:42.86%
(The average a petrol MOTOR HISPANIA RX50 year 2004 passes without issue)
Based on:112 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment15
Rear reflector on motorcycle missing |1.4.1|10
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|9
Steering headbearing has excessive free play |2.2.2|7
Drive chain excessively loose |6.2.1d|4
Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Drive chain excessively tight |6.2.1d|3
Nearside Front Direction indicator not working |1.5.1c|3
Front wheel bearings have excessive free play |2.3.5b|3
Rear wheel bearings have excessive free play |2.4.A.2c|3
Rear Drive chain sprocket worn to excess |6.2.1e|3
Exhaust mounting does not fully support the exhaust system |7.1.1.c|3
Front shock absorber seal failed and leaking oil |2.3.3|3
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Rear shock absorber seal failed and leaking oil |2.4.A.1c|2
Rear suspension component seized |2.4A2a|ii||2
Rear Brake pedal is so short and the brake cannot be readily applied |3.1.3c|2
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c|2
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4|2
Exhaust is leaking and excessively noisey |7.1.1b|2
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|2
Front wheel bearings are excessively rough |2.3.5b|2
Horn not working |1.7.3a|2
Rear Brake disc|s| cracked |3.2.A1g|2
Nearside Front shock absorber seal failed and leaking oil (2.3.3)2
Riders seat insecure (6.2.1a)2
Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)2
Drive chain worn to excess |6.2.1e|2
Wheel alignment incorrect which adversely affects the handling |2.5.1|2
Registration plate issues2
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Headlamp aim headlamp deteriorated and function impaired |1.2.3a|2
Clutch lever positioned so it cannot be readily operated. |6.2.1g|2
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|2
Riders seat insecure |6.2.1a|2
Rear Rear reflector on motorcycle missing |1.4.1|2
Front suspension has inadequate damping effect. |2.3.6c|2
Front Direction indicators not working |1.5.1c|2
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Rear suspension bush has excessive free play |2.4.A2a|i||2
Front Lower Rear suspension bush has excessive free play |2.4.A2a|i||1
Rear Brake reaction bracket insecure |3.2.A1j|1
Rear suspension bush excessively deteriorated |2.4.A2a|i||1
Rear mono-shock pivot excessively worn |2.4.B.4|1
Rear Brake caliper|s| insecure |3.2.A1j|1
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j|1
Rear Floor brake test indicates a sticking brake |3.3.C2c|1
Front Fairing so located that it is likely to impede the steering |2.1.2e|1
Rear Drive belt guard insecure |6.2.1c|1
Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Offside Front Direction indicator missing |1.5.1a|1
Front Throttle operating incorrectly |6.2.1f|1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Handlebar mounting clamp bolt loose |2.1.1a|1
Front Brake disc|s| excessively worn |3.2.A1l|1
Front Brake master cylinder insecurely mounted |3.2.B1a|1
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Rear Front wheel bearings have excessive free play |2.3.5b|1
Headlamp dipped beam affected by the operation of another lamp (1.2.2c)1
Rear reflector on motorcycle missing (1.4.1)1
Rear suspension bearing has excessive free play (2.4.A2a(i))1
Wheel alignment incorrect which adversely affects the handling (2.5.1)1
Wheel alignment incorrect which adversely affects the steering (2.5.1)1
Rear Wheel bearing has excessive play (5.1.3 (a) (i))1
Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i))1
Drive chain excessively tight (6.2.1d)1
Rear wheel spindle securing nut(s) loose (2.4.A.2b)1
Front wheel bearings have excessive free play (2.3.5b)1
Headlamp aim beam image kick up to the offside |1.6|1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c|1
Headlamp insecure bulb |1.2.3b|1
Front Direction indicators affected by the operation of another lamp |1.5.1c|1
Rear Direction indicators affected by the operation of another lamp |1.5.1c|1
An item not tested |Manual|1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Position lamp switch insecure |1.1.4b|1
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Fuel cap sealing washer missing |7.2.2c|1
Nearside Handlebar mounting clamp loose |2.1.1a|1
Nearside Footrest missing |6.2.1a|1
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|1
Front Brake lever insecure |3.1.2a|1
Offside Rear Footrest missing |6.2.1a|1
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Direction indicators not working |1.5.1c|1
Nearside Steering control handlebar movement restricted by trapped cables |2.1.2c|1
Direction indicator not working |1.5.1c|1
Rear suspension bearing has excessive free play |2.4.A2a|i||1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Front Front wheel bearings have excessive free play |2.3.5b|1
Nearside Rear Direction indicator incorrect colour |1.5.1b|1
Offside Rear Direction indicator incorrect colour |1.5.1b|1
Front Steering lock stop ineffective |2.1.3|1
Lower Rear mono-shock pivot excessively worn |2.4.B.4|1
Offside Rear Footrest insecure |6.2.1a|1
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b|1
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c|1
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c|1
Rear Direction indicator flashing more than 120 times per minute |1.5.1c|1
Nearside Steering lock stop ineffective |2.1.3|1
Offside Steering lock stop ineffective |2.1.3|1
Rear suspension component loose |2.4.A.1a|1
Stop lamp affected by the operation of another lamp |1.3.2|1
Front Horn not working |1.7.3a|1
Front Steering headbearing has excessive free play |2.2.2|1
Rear Direction indicators not working |1.5.1c|1
Brake pedal is so short and the brake cannot be readily applied |3.1.3c|1
Brake lever is damaged and the brake cannot be readily applied |3.1.3c|1
Offside Handlebar deformed |2.1.1b|1
Rear mono-shock pivot seized |2.4.B.4|1
Offside Front Direction indicator incorrect colour |1.5.1b|1
Rear wheel rotation likely to be impeded |6.2.1b|1
Exhaust excessively deteriorated |7.1.1a|1
Rear Brake pedal insecure |3.1.2a|1
Nearside Front shock absorber seal failed and leaking oil |2.3.3|1
Rear Stop lamp affected by the operation of another lamp |1.3.2|1
Rear reflector on motorcycle obscured |1.4.1|1
Rear position lamp insecure |1.1.1c|1
Nearside Front Roller brake test indicates a severely juddering brake |3.3.A1b|1
Brake master cylinder leaking hydraulic fluid |3.2.B1e|1
Front Brake lever cannot be applied smoothly |3.1.3d|1
Nearside Direction indicator missing |1.5.1a|1
Offside Direction indicator missing |1.5.1a|1
Handlebar deformed |2.1.1b|1
Throttle operating incorrectly |6.2.1f|1
Rear Stop lamp damaged and function impaired |1.3.3a|1
Offside Front Direction indicator not working |1.5.1c|1
Rear Rear reflector on motorcycle obscured |1.4.1|1
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Offside Handlebar mounting clamp loose |2.1.1a|1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Headlamp switch faulty |1.2.4|1
Rear suspension movement is excessively stiff |2.4.A.3b|1
Front Brake lever pivots excessively worn |3.1.3a|1
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy