Most common failures | No# failures |
---|
Headlamp aim out of alignment | 25 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 22 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Throttle operating incorrectly |6.2.1f| | 5 |
Horn not working |1.7.3a| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Direction indicators not working |1.5.1c| | 3 |
Registration plate issues | 3 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Fuel hose leaking |7.2.1a| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Offside Rear Position lamp not working (4.2.1 (a)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Rear brake binding | 1 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Rear Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Horn control defective |1.7.2a| | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Outer Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Horn not working |1.6.2a| | 1 |
Rear brake application uneven | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Direction indicators not working L/H side |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Stop lamp does not illuminate immediately a brake applies HAND CONTROL |1.3.1a| | 1 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Brake linked system has a seized master cylinder pivot. |3.2.B5| | 1 |
Registration plate lamp issues | 1 |
Inner Front Upper Indicator tell tale not functioning |1.5.2| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Sidecar front position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Front Brake lever mounting insecure |3.1.2a| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Floor brake test indicates a severely juddering brake |3.3C2d.| | 1 |
Front Stop lamp does not illuminate immediately a brake applies brake |1.3.1a| | 1 |
Offside Front Handlebar retaining device loose bar end loose. |2.2.1 |b| |i|| | 1 |
Offside Position lamp switch insecure |4.2.2 |b|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Inner Fuel system component leaking |7.2.1a| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Stop lamp does not illuminate immediately a brake applies l/h side |1.3.1a| | 1 |
Offside Rear Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
Rear Wheel spoke excessively loose (5.2.2 (d)) | 1 |
Rear Brake pedal anti-slip provision missing (1.1.2 (c)) | 1 |
Central Front Headlamp aim not tested not working (4.1.2 (b)) | 1 |
Rear Brake hose leaking (1.1.12 (c)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Nearside Exhaust system insecure (6.1.2 (a)) | 1 |
Front Headlamp aim not tested (4.1.2 (b)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Rear Suspension arm missing (5.3.3 (a) (ii)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Brake caliper insecure (1.1.16 (c) (i)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Horn not working (7.7 (a)) | 1 |
Steering headbearing excessively stiff or notchy Stiff (2.2.2 (f) (i)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Central Front Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Offside Front Upper Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Central Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Nearside Front Horn not working (7.7 (a)) | 1 |
Nearside Front Upper Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |