Most common failures | No# failures |
---|
Headlamp aim out of alignment | 41 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Registration plate lamp issues | 7 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 6 |
Registration plate issues | 5 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Horn not working |1.7.3a| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Nearside Front Direction indicators not working |1.5.1c| | 4 |
Throttle operating incorrectly |6.2.1f| | 3 |
Rear Position lamp not working (4.2.1 (a)) | 3 |
Headlamp insecure |1.2.3b| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
Rear Footrest missing |6.2.12 |a|| | 1 |
Nearside Rear Exhaust system insecure (6.1.2 (a)) | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp aim beam image kick up to the offside Headlamp mask fitted during test |1.6| | 1 |
Headlamp aim beam image kick up to the offside Headlamp mask fitted on test |1.6| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear reflector on motorcycle obscured (1.4.1) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Centre Rear Rear reflector on motorcycle missing (1.4.1) | 1 |
Rear Roller brake test indicates a severely juddering brake (3.3.A1b) | 1 |
Rear wheel bearings have excessive free play (2.4.A.2c) | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort (3.3.A1c) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Offside Front Direction indicator flashing more than 120 times per minute (1.5.1c) | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute (1.5.1c) | 1 |
Suspension component has excessive wear or free play Suspension arm (swingarm) bearings (5.3.3 (d)) | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Centre Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Exhaust is leaking and excessively noisey Centre to rear joint |7.1.1b| | 1 |
Clutch lever shortened so it cannot be readily operated (6.2.7 (b)) | 1 |
Horn not working (7.7 (a)) | 1 |
Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Pillion Footpeg |6.2.1h| | 1 |
Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Riders footpeg |6.2.1h| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Pillion Footpeg |6.2.1h| | 1 |
Stop lamp does not illuminate immediately a brake applies Rear Control |1.3.1a| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies front brake |1.3.1a| | 1 |
Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Rear Lower Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Direction indicators not working N/S |1.5.1c| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Brake disc fractured |1.1.14 |a| |ii|| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Brake pedal has insufficient reserve travel piston sticking in m/cylinder (1.1.2 (a)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Stop lamp not working With hand brake lever (4.3.1 (a) (ii)) | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Front Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Headlamp aim not tested |1.6| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Rear Road spring mounting so insecure that control of the motorcycle is likely to be adversely affected |5.3.1 |a| |ii|| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Front Front wheel bearings have excessive free play only in one spot, suggest bearing cage is dammaged |2.3.5b| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Front Brake fluid not visible (1.1.10 (d) (iii)) | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Stop lamp does not illuminate immediately a brake applies brake pedal |1.3.1a| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake pedal anti-slip provision missing (1.1.2 (c)) | 1 |
Brake pedal is so short that the brake cannot be readily applied (1.1.2 (d)) | 1 |
Offside Rear Footrest missing pillion peg snapped (6.2.12 (a)) | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |