MOT History from tests of petrol MORINI 35s year 1980

Review the list of common MORINI 35 failures below or to perform a specific mot history check on your MORINI then use our popular KnowYourCar service

mot history

Pass percent:86.99%

(The average a petrol MORINI 35 year 1980 passes without issue)

Based on:246 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	7
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	4
Registration plate issues	3
Front Horn not working \|1.7.3a\|	2
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))	1
Offside Rear Direction indicator not working (4.4.1 (a) (ii))	1
Rear suspension component loose \|2.4.A.1a\|	1
Fuel cap ineffective seal damaged (6.1.3 (b) (i))	1
Nearside Front Direction indicators not working \|1.5.1c\|	1
Brake back plate\|s\| securing bolt\|s\| missing pad pins not secure \|3.2.A1j\|	1
Rear Brake drum\|s\| securing bolt\|s\| loose \|3.2.A1g\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Drive chain excessively tight \|6.2.1d\|	1
Offside Front Front wheel spindle securing nut locking device missing \|2.3.3a\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Headlamp switch faulty \|1.2.4\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Front Wheel bearing rough when rotated (5.1.3 (b) (i))	1
Rear Fuel system component insecure \|7.2.1b\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Drive chain worn to excess \|6.2.1e\|	1
Rear Drive chain sprocket worn to excess \|6.2.1e\|	1
Drive chain excessively loose \|6.2.1d\|	1
Front suspension has inadequate damping effect. \|2.3.6c\|	1
Headlamp light source and lamp not compatible (4.1.4 (c))	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Offside Front Footrest insecure \|6.2.1a\|	1
Front Brake locking device insecure \|3.2.A1e\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	7
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	4
Registration plate issues	3
Front Horn not working \|1.7.3a\|	2
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))	1
Offside Rear Direction indicator not working (4.4.1 (a) (ii))	1
Rear suspension component loose \|2.4.A.1a\|	1
Fuel cap ineffective seal damaged (6.1.3 (b) (i))	1
Nearside Front Direction indicators not working \|1.5.1c\|	1
Brake back plate\|s\| securing bolt\|s\| missing pad pins not secure \|3.2.A1j\|	1
Rear Brake drum\|s\| securing bolt\|s\| loose \|3.2.A1g\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Drive chain excessively tight \|6.2.1d\|	1
Offside Front Front wheel spindle securing nut locking device missing \|2.3.3a\|	1
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Headlamp switch faulty \|1.2.4\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Front Wheel bearing rough when rotated (5.1.3 (b) (i))	1
Rear Fuel system component insecure \|7.2.1b\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Drive chain worn to excess \|6.2.1e\|	1
Rear Drive chain sprocket worn to excess \|6.2.1e\|	1
Drive chain excessively loose \|6.2.1d\|	1
Front suspension has inadequate damping effect. \|2.3.6c\|	1
Headlamp light source and lamp not compatible (4.1.4 (c))	1
Headlamp aim beam image kick up to the offside \|1.6\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Offside Front Footrest insecure \|6.2.1a\|	1
Front Brake locking device insecure \|3.2.A1e\|	1

MOT History from tests of petrol MORINI 35s year 1980

Find us on Facebook