Most common failures | No# failures |
---|
Brake pipe excessively corroded | 11 |
Windscreen wiper does not clear the windscreen effectively | 5 |
Registration plate lamp issues | 4 |
Horn not working |1.6.2a| | 3 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear fog lamp not working |1.3.2b| | 2 |
Rear fog lamp insecure |1.3.2a| | 2 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 2 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Emissions not tested |7.0| | 1 |
Battery insecure |1.9.1| | 1 |
Electrical wiring insecure |1.9.2a| | 1 |
Nearside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Inner Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Nearside Front Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Centre Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear An item not tested |Manual| | 1 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Windscreen wiper blade missing |8.2.2| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Offside Front Wheel bolt|s| missing |4.2.A.1e| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Rear brake application uneven | 1 |
Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
Offside Rear Wheel stud|s| missing |4.2.A.1e| | 1 |
Power steering component|s| leaking |2.3.3b| | 1 |
Nearside Front Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Nearside front brake recording little or no effort |3.7.B.5a| | 1 |
Front brake application uneven | 1 |
Registration plate issues | 1 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Headlamp aim out of alignment | 1 |
Nearside Front Seat belt retracting mechanism defective |5.2.5b| | 1 |
Nearside Front Steering rack insecure |2.2.B.1a| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Rear fog lamp adversely affected by the operation of another lamp |1.3.2f| | 1 |
Offside Front Power steering pipe|s| or hose|s| leaking |2.3.3b| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Rear Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Rear Anti-roll bar linkage synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Rear fog lamp excessively damaged so that it is not visible from a reasonable distance |1.3.2d| | 1 |
Rear Exhaust has a part missing |7.1.1a| | 1 |