Most common failures | No# failures |
---|
Headlamp aim out of alignment | 12 |
Registration plate lamp issues | 9 |
Brake pipe excessively corroded | 7 |
Windscreen wiper does not clear the windscreen effectively | 7 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 6 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 5 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Horn not working |1.6.2a| | 3 |
Offside Stop lamp not working |1.2.1b| | 3 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Front Ball joint has excessive play |2.2.B.1f| | 3 |
Offside Rear Rear wheel bearing has excessive play |2.6.2| | 3 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Brake hose excessively deteriorated | 3 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 3 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 2 |
Offside Rear wheel bearing has excessive play |2.6.2| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 2 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 2 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Steering rack gaiter split |2.2.D.2d| | 2 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Stop lamp not working |1.2.1b| | 2 |
Brake hose damaged | 2 |
Nearside Outer Front Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Front brake application uneven | 2 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Windscreen has damage | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Power steering component|s| leaking from a failed seal |2.3.3b| | 1 |
Nearside Front Suspension arm cracked |2.4.G.1| | 1 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Front Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Anti-roll bar linkage insecure |2.4.G.1| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Rear position lamp|s| incomplete |1.1.4a| | 1 |
Nearside Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Side repeater incomplete |1.5.A1b| | 1 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Nearside Rear Shock absorber casing corroded externally so the unit does not function |2.7.2a| | 1 |
Offside Rear Shock absorber casing corroded externally so the unit does not function |2.7.2a| | 1 |
Fuel cap/sealing device mounting flange/sealing method defective |7.2.4c| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
Nearside Rear Upper Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Rear Exhaust mounting missing |7.1.1b| | 1 |
Rear Rear fog lamp not working |1.3.2b| | 1 |
Brakes imbalanced across an axle | 1 |
Brake pipe leaking |3.6.A.1| | 1 |
Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Registration plate issues | 1 |
Brake load sensing valve linkage defective and function impaired |3.6.E.3| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Rear parking brake recording little or no effort | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Offside Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Outer Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Inner Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear An item not tested |Manual| | 1 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Inner Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside rear brake juddering severely |3.7.A.5b| | 1 |
Offside rear brake juddering severely |3.7.A.5b| | 1 |
Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Inner Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |