Most common failures | No# failures |
---|
Headlamp aim out of alignment | 6 |
Windscreen wiper does not clear the windscreen effectively | 5 |
Brake pipe excessively corroded | 5 |
Registration plate issues | 2 |
Nearside Front Direction indicator not working |1.4.A.2c| | 2 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Offside Stop lamp not working |1.2.1b| | 2 |
Battery insecure |1.9.1| | 2 |
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 2 |
Registration plate lamp issues | 2 |
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 2 |
Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.3.D.1| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced hole in rear of arch where seems meet. (6.1.1 (c) (i)) | 1 |
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced hole in rear of arch where seems meet. (6.1.1 (c) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected where strut is mounted. (5.3.6 (a) (ii)) | 1 |
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Front Headlamp aim projected beam image is obviously incorrect no beam pattern, lense needs polish or new unit (4.1.2 (c)) | 1 |
Brake fluid contaminated (1.8 (a)) | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Centre Rear Exhaust system not adequately supported |7.1.1| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Road wheel fixing missing (5.2.1 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger has excessive corrosion (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outrigger has excessive corrosion (5.3.6 (a) (i)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Stop lamp excessively deteriorated so that it is not visible from a reasonable distance |1.2.1d| | 1 |
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Exhaust Lambda reading after 2nd fast idle outside specified limits |8.2.1.2 |c|| | 1 |
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |