Most common failures | No# failures |
---|
Brake pipe excessively corroded | 9 |
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 6 |
Registration plate issues | 4 |
Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Anti-lock braking system warning lamp indicates an ABS fault | 3 |
Rear fog lamp not working (4.5.1 (a) (ii)) | 3 |
Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 2 |
Offside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear fog lamp not working |1.3.2b| | 2 |
Registration plate lamp issues | 2 |
Headlamp aim out of alignment | 2 |
Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 2 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Service brake is causing the steering wheel to severely pull one way |3.7.C.2| | 1 |
Nearside Rear Brake hose excessively damaged |3.6.B.4d| | 1 |
Supplementary Restraint System warning lamp indicates a fault |5.4.2| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front Steering rack gaiter insecure |2.2.D.2d| | 1 |
Offside Front Steering rack gaiter insecure |2.2.D.2d| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Offside Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Rear brake binding | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Emissions not tested |7.0| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill by suspension mounting |2.4.A.3| | 1 |
Offside Rear Brake hose leaking |3.6.A.1| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Rear brake disc excessively pitted |3.5.1h| | 1 |
Offside Rear brake disc excessively pitted |3.5.1h| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 1 |
Front position lamp|s| not working both |1.1.A.3b| | 1 |
Rear fog lamp switch missing |1.3.1a| | 1 |
Rear fog lamp tell tale missing |1.3.1b| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 1 |
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside & nearside rear inner sill (5.3.6 (a) (i)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Emissions not tested (8.2.1.2 (d)) | 1 |
Mechanical brake component has restricted free movement | 1 |
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Offside Side repeater not working (4.4.1 (a) (ii)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor near wishbone mount (5.3.6 (a) (i)) | 1 |
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 1 |
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 1 |
Anti-lock braking system warning lamp does not illuminate (1.6 (a)) | 1 |
Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Brake hose excessively deteriorated | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Front Service brake excessively binding X 2 (1.2.1 (f)) | 1 |
Rear Service brake excessively binding X 2 (1.2.1 (f)) | 1 |
Rear Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 1 |
Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |