| Most common failures | No# failures |
|---|
| Brake pipe excessively corroded | 7 |
| Windscreen wiper does not clear the windscreen effectively | 3 |
| Brakes imbalanced across an axle | 3 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 2 |
| Registration plate lamp issues | 2 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Fuel pipe leaking |7.2.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Windscreen has damage | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Headlamp aim out of alignment | 1 |
| Offside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Front brake application uneven | 1 |
| Registration plate issues | 1 |
| Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner wing |5.2.6| | 1 |
| Centre Rear Statutory seat belt missing |5.1.1| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Nearside Front coil spring broken |2.4.C.1a| | 1 |
| Offside Front coil spring broken |2.4.C.1a| | 1 |
| Centre Rear Upper Stop lamp not working |1.2.1b| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |