| Most common failures | No# failures |
|---|
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 50 |
| Parking brake: efficiency below requirements |3.7.B.7| | 38 |
| Service brake: efficiency below requirements |3.7.B.7| | 37 |
| Headlamp aim out of alignment | 36 |
| Windscreen wiper does not clear the windscreen effectively | 33 |
| Brake pipe excessively corroded | 31 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 26 |
| Rear parking brake recording little or no effort | 24 |
| Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 22 |
| Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 21 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 15 |
| Brakes imbalanced across an axle | 14 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 13 |
| Offside Steering rack gaiter split |2.2.D.2d| | 12 |
| Registration plate lamp issues | 12 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 12 |
| Registration plate issues | 12 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 12 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 11 |
| Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 8 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 8 |
| Nearside Front Steering rack gaiter split |2.2.D.2d| | 7 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 7 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 7 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
| Offside Rear fog lamp not working |1.3.2b| | 6 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 6 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
| Horn not working |1.6.2a| | 5 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 5 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 5 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 5 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 5 |
| Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 5 |
| Rear fog lamp not working |1.3.2b| | 5 |
| Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 4 |
| Battery insecure |1.9.1| | 4 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 4 |
| Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b)) | 4 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 4 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 4 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Rear brake binding | 4 |
| Rear Exhaust system not adequately supported |7.1.1| | 4 |
| Parking brake lever has no reserve travel |3.1.6b| | 4 |
| Offside Windscreen wiper blade deteriorated |8.2.2| | 4 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 4 |
| Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 4 |
| Offside Front Steering rack gaiter split |2.2.D.2d| | 4 |
| Rear fog lamp tell tale not working |1.3.1b| | 4 |
| Offside Stop lamp not working |1.2.1b| | 3 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 3 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 3 |
| Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 3 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Front brake disc in such a condition that it is seriously weakened | 3 |
| Offside Track rod end ball joint has excessive play |2.2.B.1f| | 3 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 3 |
| Mechanical brake component has restricted free movement | 3 |
| Offside Front Direction indicator incorrect colour |1.4.A.2f| | 3 |
| Nearside Front Shock absorbers has a serious fluid leak | 3 |
| Nearside Windscreen wiper blade deteriorated |8.2.2| | 3 |
| Horn not working (7.7 (a)) | 3 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 3 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 3 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 3 |
| Offside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 3 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
| Nearside Rear brake disc excessively pitted |3.5.1h| | 3 |
| Brake hose excessively deteriorated | 3 |
| Rear fog lamp switch faulty |1.3.1a| | 3 |
| Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
| Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 2 |
| Offside Rear Stop lamp not working |1.2.1b| | 2 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 2 |
| Rear rear brake recording little or no effort |3.7.B.5a| | 2 |
| Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
| Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 2 |
| Nearside Stop lamp not working |1.2.1b| | 2 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 2 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 2 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 2 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
| Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
| Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 2 |
| Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Rear brake disc in such a condition that it is seriously weakened | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 2 |
| Nearside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 2 |
| Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 2 |
| Brake performance not tested (1.2.1 (g)) | 2 |
| Offside Front Wheel nut|s| missing |4.2.A.1e| | 2 |
| Offside Rear brake disc excessively pitted |3.5.1h| | 2 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 2 |
| Nearside Front Service brake excessively fluctuating (1.2.1 (e)) | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 2 |
| Anti-lock braking system warning lamp indicates an ABS fault | 2 |
| Offside Front Suspension arm corroded and seriously weakened |2.4.G.1| | 2 |
| Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Direction indicator flashing more than 120 times a minute |1.4.A.2g| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Headlamp insecure |1.7.3| | 1 |
| Nearside Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Headlamp not working on main beam |1.7.5a| | 1 |
| Main beam `tell-tale` not working |1.7.4c| | 1 |
| Steering locking device missing |2.2.C.1g| | 1 |
| brake disc excessively pitted |3.5.1h| | 1 |
| Nearside Outer Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Rear Rear fog lamp missing |1.3.2a| | 1 |
| Rear Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Rear Rear fog lamp switch missing |1.3.1a| | 1 |
| Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 1 |
| Offside Headlamp aim beam image obviously incorrect has no aim beam |1.8.A.1b| | 1 |
| Nearside Rear Rear position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Track rod end ball joint has excessive play Both outer ball joint worn |2.2.B.1f| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering Both rear chassis channal within 30cm of rear suspension |6.1.A.1| | 1 |
| Nearside Rear Inner Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
| Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Rear Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Suspension arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Front Steering rack gaiter split |2.2.D.2d| | 1 |
| Front Anti-roll bar rubber bush deteriorated resulting in excessive movement o/s and n/s front anti roll bar D bushes |2.4.G.2| | 1 |
| Offside Front front brake binding |3.7.B.1| | 1 |
| Offside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
| Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn D Bush (5.3.4 (a) (i)) | 1 |
| Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Underside Of Front Offside Sill (5.3.6 (a) (i)) | 1 |
| Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Nearside Front Headlamps matched pair are not the same colour |1.7.6| | 1 |
| Offside Power steering ram|s| leaking from a failed seal |2.3.3b| | 1 |
| Offside Rear fog lamp missing |1.3.2a| | 1 |
| Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Nearside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Offside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor / outrigger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill /sill end (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill / sill end (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| rear brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Front Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
| Offside Front Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
| Offside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 1 |
| Steering wheel has movement relative to the column indicating looseness (2.2.1 (a) (i)) | 1 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
| Rear reflector not red in colour |1.5.1d| | 1 |
| Nearside Side repeater has a product on the light source so it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Offside Side repeater has a product on the light source so it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Nearside Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Offside Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Nearside Front Headlamp insecure |4.1.1 |c|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Brake modification unsafe trim/wiring obstructing brake pedal |1.1.21 |d| |i|| | 1 |
| Nearside Front Direction indicators not working |1.4.A.2c| | 1 |
| Nearside Headlamp incorrect colour |1.7.5b| | 1 |
| Offside Headlamp incorrect colour |1.7.5b| | 1 |
| Offside Front Electrical wiring insecure |1.9.2a| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Front Inner Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Inner Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Headlamp lens seriously defective |4.1.1 |b| |ii|| | 1 |
| Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Engine MIL inoperative or indicates a malfunction |8.2.1.2 |h|| | 1 |
| Offside Front Shock absorbers has a serious fluid leak | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strur mounting |5.3.6 |a| |i|| | 1 |
| Nearside Parking brake inoperative on one side |1.4.1 |a|| | 1 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Rear brake caliper has restricted free movement |3.5.1k| | 1 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Rear Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 1 |
| Windscreen washer not working | 1 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Exhaust carbon monoxide content at idle exceeds manufacturers specified limits (8.2.1.2 (b)) | 1 |
| Front brake application uneven | 1 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
| Offside Side repeater not working |1.4.A.2c| | 1 |
| Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Offside Front Anti-roll bar pin or bush excessively worn Inner D bush (5.3.4 (a) (i)) | 1 |
| Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
| Nearside Front Road wheel fixing missing (5.2.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 1 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Offside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Emissions not tested emissions so high blocked emissions reader (8.2.1.2 (d)) | 1 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Headlamp does not operate immediately when selected on main beam |1.7.4a| | 1 |
| Offside Headlamp does not operate immediately when selected on main beam |1.7.4a| | 1 |
| Nearside Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 1 |
| Offside Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 1 |
| Nearside front brake binding |3.7.B.1| | 1 |
| Nearside front brake juddering severely |3.7.A.2b| | 1 |
| Nearside Front Wheel bolt|s| missing |4.2.A.1e| | 1 |
| Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Rear Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 1 |
| Nearside Headlamp lens seriously defective no pattern (4.1.1 (b) (ii)) | 1 |
| Power steering component leaking (2.1.5 (a)) | 1 |
| Exhaust system insecure (6.1.2 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength closing panel (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength closing panel (5.3.6 (a) (i)) | 1 |
| Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
| Nearside Steering locking device missing |2.2.C.1g| | 1 |
| Offside Steering locking device missing |2.2.C.1g| | 1 |
| Nearside Front Brake hose leaking |3.6.A.1| | 1 |
| Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Suspension arm attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Brake hose leaking |3.6.A.1| | 1 |
| Emissions not tested |7.3.A.1| | 1 |
| Offside Headlamp adversely affected by the operation of another lamp |1.7.5c| | 1 |
| Centre Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Nearside Rear Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wheel arch were meets sill (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner arch were meets sill (5.3.6 (a) (ii)) | 1 |
| Offside Rear Upper Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 1 |
| Nearside Rear brake disc excessively scored |3.5.1h| | 1 |
| Nearside Front Wheel nut|s| missing |4.2.A.1e| | 1 |
| Nearside Front Wheel nut|s| loose |4.2.A.1e| | 1 |
| Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
| Fuel tank leaking |7.2.3| | 1 |
| Steering rack insecure |2.2.B.1a| | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Side repeater not working |1.4.A.2c| | 1 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Offside Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Rear Seat belt anchorage prescribed area strength or continuity significantly reduced both wheel arches (7.1.1 (a) (i)) | 1 |
| Offside Rear brake caliper has restricted free movement |3.5.1k| | 1 |
| Offside Front Lower Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Rear Upper Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Front Oil leaking continuously from engine posing a serious risk to road safety (8.4.1 (a) (ii)) | 1 |
| Front Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |
| Central Exhaust system insecure (6.1.2 (a)) | 1 |
| Offside Rear Shock absorbers has a serious fluid leak | 1 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Emissions not tested (8.2.1.2 (d)) | 1 |
| Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Front Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
| Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
| Offside Front Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i)) | 1 |
| Front Anti-roll bar pin or bush excessively worn front D bushes (5.3.4 (a) (i)) | 1 |
| Nearside Rear Shock absorbers has negligible damping effect (5.3.2 (d)) | 1 |
| Offside Rear Shock absorbers has negligible damping effect (5.3.2 (d)) | 1 |
| Nearside Rear Direction indicator incorrect colour they are red (4.4.3 (a)) | 1 |
| Offside Rear Direction indicator incorrect colour they are red (4.4.3 (a)) | 1 |
| Nearside Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
| Offside Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
| Offside Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced central (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced central (6.1.1 (c) (i)) | 1 |
| Emissions not tested due to irratic idling (8.2.1.2 (d)) | 1 |
| Exhaust engine idle speed too high |7.3.D.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill both sides (5.3.6 (a) (i)) | 1 |
| Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill both sides (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength valance (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area is inadequately repaired sus arm bracket both sides (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength next to chassis rail and arm mount as marked (5.3.6 (a) (i)) | 1 |
| Rear brake disc excessively pitted |3.5.1h| | 1 |
| Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Side repeater not working |1.4.A.2c| | 1 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
| Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded floor area |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded out rigger |2.4.A.3| | 1 |
| Emissions not tested cat missing (8.2.1.2 (d)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting 30cm for shock (6.2.2 (d) (i)) | 1 |
| Nearside Front Headlamp light source and lamp not compatible HID FITTED (4.1.4 (c)) | 1 |
| Offside Front Headlamp light source and lamp not compatible hid fitted (4.1.4 (c)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at side of fueltank (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch at sill end (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch next to shock absorber upper mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch next to shock absorber upper mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired chassis next to fuel tank, containing filler (5.3.6 (a) (i)) | 1 |
| Nearside Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Offside Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
| Nearside Front Steering rack damaged and unserviceable |2.2.C.1d| | 1 |
| Offside Ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Rear Stop lamp not working |1.2.1b| | 1 |
| Nearside Rear Direction indicators not working |1.4.A.2c| | 1 |
| Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Outer Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Driver`s seat insecure seat runners made of wood |6.2.A.1| | 1 |
| Passenger`s seat insecure rear bolt missing |6.2.A.1| | 1 |
| Exhaust catalytic converter missing where one was fitted as standard |7.1.3| | 1 |
| Offside Front Direction indicator not working |1.4.A.2c| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting nut missing |2.4.G.1| | 1 |
| Nearside Front Macpherson strut insecure locking ring on coil over loose |2.4.G.1| | 1 |
| Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Nearside Rear Parking |secondary brake| on a single line braking system has inadequate effort at a wheel |1.3.1 |a| |i|| | 1 |
| Offside Rear Parking |secondary brake| on a single line braking system has inadequate effort at a wheel |1.3.1 |a| |i|| | 1 |
| Nearside Rear Service brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
| Offside Rear Service brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
| Nearside Rear Service brake excessively fluctuating |1.2.1 |e|| | 1 |
| Nearside Inner Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Headlamp insecure |1.7.3| | 1 |
| Rear Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Anti-lock braking system warning lamp does not illuminate |3.4.1b| | 1 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Fuel system component leaking |7.2.3| | 1 |
| Nearside Rear Brake pipe seriously damaged |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Nearside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
| Front Headlamp aim projected beam image is obviously incorrect Both Sides. (4.1.2 (c)) | 1 |
| Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt Split. (2.1.3 (g) (ii)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Floor. (6.2.2 (d) (i)) | 1 |
| Brake pedal spongy |3.3.B.1b| | 1 |
| Supplementary Restraint System warning lamp indicates a fault |5.4.2| | 1 |
| Offside Rear Exhaust mounting missing |7.1.1b| | 1 |
| Centre Rear Rear fog lamp not working |1.3.2b| | 1 |
| Nearside Front Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Centre Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Braking system leaking |3.6.A.1| | 1 |
| Offside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings strut mount next to engine mount |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Front brake excessively fluctuating | 1 |
| Rear brake application uneven | 1 |
| Nearside Front Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Headlamps matched pair are incorrectly positioned |1.7.3| | 1 |