Most common failures | No# failures |
---|
Brake pipe excessively corroded | 16 |
Windscreen wiper does not clear the windscreen effectively | 8 |
Rear fog lamp not working (4.5.1 (a) (ii)) | 7 |
Registration plate issues | 6 |
Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 5 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 4 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 3 |
Brakes imbalanced across an axle | 3 |
Registration plate lamp issues | 3 |
Offside Front Lower Shock absorbers has an excessively worn bush (5.3.2 (c)) | 3 |
Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 3 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 3 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 2 |
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 2 |
Horn sound not in accordance with requirements (7.7 (c)) | 2 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 2 |
Horn not working (7.7 (a)) | 2 |
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 2 |
Rear Exhaust system insecure (6.1.2 (a)) | 2 |
Nearside Front Lower Shock absorbers has an excessively worn bush (5.3.2 (c)) | 2 |
Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i)) | 2 |
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 2 |
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 2 |
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 2 |
Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger (6.1.1 (c) (i)) | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
Steering rack has excessive free play detected at the steering wheel (steering rack fitted) (2.3 (a) (i)) | 1 |
Brake performance not tested due to defects (1.2.1 (g)) | 1 |
Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength vertical bulk head (5.3.6 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength vertical bulk head (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength main chassis (5.3.6 (a) (i)) | 1 |
Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
Nearside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Nearside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Nearside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Front Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis and outrigger (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis and outrigger (5.3.6 (a) (i)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp aim out of alignment | 1 |
Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 1 |
Battery insecure and likely to cause a short circuit Negative Battery Lead Insecure (4.13 (a) (ii)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i)) | 1 |
Nearside Front Inner Steering linkage ball joint has excessive play Rack End (2.1.3 (b) (i)) | 1 |
Offside Front Inner Steering linkage ball joint has excessive play Rack End (2.1.3 (b) (i)) | 1 |
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
Offside Front Suspension arm attachment bracket/mounting insecure arm rear bolt loose (5.3.3 (a) (i)) | 1 |
Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt both inner and outer cv boots (6.1.7 (g) (ii)) | 1 |
Nearside Suspension arm ball joint excessively worn lower ball joint (5.3.4 (a) (i)) | 1 |
Rear fog lamp switch not operating in accordance with the requirements (4.5.3 (a)) | 1 |
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Windscreen in an unacceptable condition excessive crack (3.2 (c) (i)) | 1 |
Nearside Rear Suspension arm pin or bush excessively worn both (5.3.4 (a) (i)) | 1 |
Offside Rear Suspension arm pin or bush excessively worn both (5.3.4 (a) (i)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis upper (5.3.6 (a) (i)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis lower (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill X2 (7.1.1 (a) (i)) | 1 |
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill X2 (7.1.1 (a) (i)) | 1 |
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg corroded and holed . (5.3.6 (a) (i)) | 1 |
Nearside Rear Suspension spring mounting prescribed area fractured significantly reducing structural strength Edge of previous repair cracked on edge of chassis leg behind spring mounting . (5.3.6 (a) (i)) | 1 |
Offside Front Inner Brake master cylinder/servo mounting prescribed area is excessively corroded Inner wheel arch area corroded and holed . (1.1.21 (e) (i)) | 1 |
Offside Rear Towbar attachment insecure Loose bolt , bolt not engaged into rear crossmember . (6.1.6 (c) (i)) | 1 |
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Offside Rear Vehicle structure modified such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 1 |
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
Front Exhaust system insecure (6.1.2 (a)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch/chassis above spring mount area (5.3.6 (a) (i)) | 1 |
Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Nearside Front Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Offside Front Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 1 |
Offside Front Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Nearside Front Shock absorbers has an excessively worn bush lower bush (5.3.2 (c)) | 1 |
Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt and loose (5.3.4 (b) (ii)) | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail 5 holes in front section (6.1.1 (c) (i)) | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail 1 hole in front section (6.1.1 (c) (i)) | 1 |
Nearside Front Suspension arm ball joint excessively worn lower arm (5.3.4 (a) (i)) | 1 |
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis in wheel arch (5.3.6 (a) (i)) | 1 |
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced In wheel arch (7.1.1 (a) (i)) | 1 |
Nearside Front Upper Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
Offside Front Upper Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
Nearside Rear Anti-roll bar attachment bracket/mounting insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
Nearside Rear Anti-roll bar attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
Front Exhaust has a major leak of exhaust gases box (6.1.2 (a)) | 1 |
Rear Exhaust has a major leak of exhaust gases pipe (6.1.2 (a)) | 1 |
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Rear Electrical wiring likely to touch hot or rotating parts resting on exhaust (4.11 (a) (iii)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i)) | 1 |
Steering rack has excessive free play detected at the steering wheel (steering rack fitted) Lower most universal joint has excessive play (2.3 (a) (i)) | 1 |
Lower Steering column universal joint has excessive wear or play (2.2.2 (c)) | 1 |
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Exhaust gas recirculation valve obviously modified vacuum hose disconnected (8.2.2.1 (a)) | 1 |
Engine MIL inoperative or indicates a malfunction does not illuminate (8.2.2.2 (g)) | 1 |
Nearside Passengers seat backrest cannot be secured in the upright position. centre row seat (6.2.6 (a) (i)) | 1 |
Nearside Front Lower Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Front Upper Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Front Drive shaft securing bolt missing shaft loose in hub (6.1.7 (a) (i)) | 1 |
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Offside Front Steering linkage ball joint has excessive play steering arm inner knuckle joint (2.1.3 (b) (i)) | 1 |
Offside Front Brake pipe excessively damaged from caliper is kinked (1.1.11 (c)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Exhaust fumes entering cabin tailpipe doesnt extend outwards (6.1.2 (b) (i)) | 1 |
Nearside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 1 |
Offside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 1 |
Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Rear Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
Nearside Rear Inner Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Rear Inner Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sil (5.3.6 (a) (ii)) | 1 |
Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
Nearside Rear Outer Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
Nearside Front Inner Suspension component mounting prescribed area is inadequately repaired subframe (5.3.6 (a) (i)) | 1 |
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe (5.3.6 (a) (i)) | 1 |
Windscreen washer not working | 1 |
Offside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength inner sill and area (5.3.6 (a) (i)) | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 1 |
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill and area (5.3.6 (a) (i)) | 1 |
Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
Nearside Front Subframe mounting prescribed area excessively damaged significantly reducing structural strength inner wheel arch and area (5.3.6 (a) (i)) | 1 |
Nearside Front Suspension component mounting prescribed area fractured significantly reducing structural strength chassis and area (5.3.6 (a) (i)) | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength whee arch (5.3.6 (a) (i)) | 1 |
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Exhaust emits excessive smoke or vapour likely to obscure the vision of other road users (8.2.2.2 (c)) | 1 |
Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Nearside Rear Anti-roll bar linkage pin or bush excessively worn missing (5.3.4 (a) (i)) | 1 |
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Brake performance not tested due to offside front brake pipe leaking (1.2.1 (g)) | 1 |
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Exhaust has a major leak of exhaust gases x3 (6.1.2 (a)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill back x2 (5.3.6 (a) (i)) | 1 |