| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 88 |
| Brake pipe excessively corroded | 27 |
| Windscreen wiper does not clear the windscreen effectively | 25 |
| Brake hose excessively deteriorated | 21 |
| Registration plate issues | 19 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 19 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 16 |
| Registration plate lamp issues | 15 |
| Service brake: efficiency below requirements |3.7.B.7| | 14 |
| Parking brake: efficiency below requirements |3.7.B.7| | 14 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 12 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 11 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 10 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 7 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
| Offside Stop lamp not working |1.2.1b| | 6 |
| Brakes imbalanced across an axle | 6 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Horn not working |1.6.2a| | 5 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Rear brake binding | 5 |
| Centre Exhaust system not adequately supported |7.1.1| | 5 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 5 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 5 |
| Offside Front Sub-frame rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 5 |
| Offside Front Seat belt insecurely fixed to the seat |5.2.1a| | 5 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Nearside front brake binding |3.7.B.1| | 5 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | 4 |
| Windscreen washer not working | 4 |
| Nearside Stop lamp not working |1.2.1b| | 4 |
| Rear Exhaust system not adequately supported |7.1.1| | 4 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
| Rear parking brake recording little or no effort | 4 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | 4 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
| Rear Mechanical brake component has restricted free movement | 4 |
| Offside front brake binding |3.7.B.1| | 4 |
| Battery insecure |1.9.1| | 3 |
| Nearside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 3 |
| Offside Front Sub-frame has excessive play in a pin/bush |2.4.G.2| | 3 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 3 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 3 |
| Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 3 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 3 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 3 |
| Nearside Seat belt retracting mechanism defective |5.2.5b| | 2 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 2 |
| Exhaust has a major leak of exhaust gases (7.1.2) | 2 |
| Emissions not tested |7.0| | 2 |
| Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 2 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 2 |
| Nearside Front Sub-frame has excessive play in a pin/bush |2.4.G.2| | 2 |
| Direction indicators not working |1.4.A.2c| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Front brake application uneven | 2 |
| Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Front Sub-frame rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 2 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | 2 |
| Offside Front Seat belt retracting mechanism defective |5.2.5b| | 2 |
| Rear Exhaust mounting missing |7.1.1b| | 2 |
| Offside Seat belt retracting mechanism defective |5.2.5b| | 2 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear Subframe mounting prescribed area is inadequately repaired not continuously welded (5.3.6 (a) (i)) | 2 |
| Nearside Front Suspension component mounting prescribed area fractured significantly reducing structural strength corroded (5.3.6 (a) (i)) | 2 |
| Nearside Rear Subframe mounting prescribed area is inadequately repaired corrosion within 30cm of of subframe mounting (5.3.6 (a) (i)) | 2 |
| Braking system leaking |3.6.A.1| | 2 |
| Nearside Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 2 |
| Service brake efficiency below requirements |1.2.2 |a| |i|| | 2 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Power steering component|s| leaking |2.3.3b| | 2 |
| Nearside Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 2 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Front Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Nearside Windscreen wiper blade deteriorated |8.2.2| | 2 |
| Offside Windscreen wiper blade deteriorated |8.2.2| | 2 |
| Offside Side repeater not working |1.4.A.2c| | 2 |
| Hazard warning switch faulty |1.4.B.1d| | 2 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Front Exhaust has a major leak of exhaust gases (7.1.2) | 2 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Rear Exhaust has a major leak of exhaust gases (7.1.2) | 2 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3) | 2 |
| Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 2 |
| All position lamps not working |1.1.A.3b| | 2 |
| Front Headlamp not working on main beam |1.7.5a| | 2 |
| Front Headlamp not working on dipped beam |1.7.5a| | 2 |
| Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 2 |
| Nearside Steering component mounting prescribed area is excessively corroded (2.2.C.1h) | 2 |
| Nearside Headlamp aim beam image too far to the right |1.6.B4| | 2 |
| Offside Headlamp aim beam image too far to the right |1.6.B4| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 1 |
| Steering box has a significant oil leak |2.2.D.2e| | 1 |
| Nearside Front Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 1 |
| Offside Headlamp insecure |1.7.3| | 1 |
| Offside Front Direction indicator insecure |1.4.A.2b| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis (6.2.2 (d) (i)) | 1 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Rear Road wheel fixing missing (5.2.1 (a) (i)) | 1 |
| Rear brake application uneven | 1 |
| Nearside Front Seat belt damaged sufficient to obstruct correct operation of the belt (5.2.2a) | 1 |
| Nearside Front Seat belt locking mechanism does not secure or release (5.2.5a) | 1 |
| Offside Front Seat belt insecurely fixed to the seat (5.2.1a) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
| Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 1 |
| Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Hazard warning lamps inoperative |1.4.B.1b| | 1 |
| Nearside Front Inner Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Front passenger seat insecure |6.2.3| | 1 |
| Offside Front Lower Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Outer Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Inner Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Brake cable knotted |3.5.1b| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded outer sill area |2.4.A.3| | 1 |
| Nearside Rear Stop lamp not working |1.2.1b| | 1 |
| Exhaust system not adequately supported (7.1.1) | 1 |
| Offside Front Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f) | 1 |
| Offside Rear Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f) | 1 |
| Parking brake: efficiency below requirements (3.7.D.4) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| front brake juddering severely |3.7.A.2b| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired (2.4.A.3) | 1 |
| Nearside Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Offside Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Centre Exhaust has a part missing |7.1.1a| | 1 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Nearside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Brake pedal spongy |3.3.B.1b| | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 1 |
| Parking brake: efficiency below requirements (3.7.B.7) | 1 |
| Rear Fuel pipe leaking (6.1.3 (b) (i)) | 1 |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 1 |
| Nearside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Inner Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside front brake binding (3.7.B.1) | 1 |
| Brake performance not tested |3.7.A.1| | 1 |
| Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Outer Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Outer Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Outer Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Inner Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Inner Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Inner Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Inner Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Front Seat belt anchorage loose buckle bolt loose (7.1.1 (b)) | 1 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
| Offside Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
| Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Fuel pipe leaking |7.2.3| | 1 |
| Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Shock absorbers has a serious fluid leak | 1 |
| Offside Front Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 1 |
| Rear Exhaust system not adequately supported various rubbers |7.1.1| | 1 |
| Rear Exhaust has a major leak of exhaust gases silencer |7.1.2| | 1 |
| Offside Rear Position lamp not working |4.2.1 |a|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inside vehicle next to brake pedal |6.1.1 |c| |i|| | 1 |
| Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under vehicle behind shield |6.1.1 |c| |i|| | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded wheel arch corroded (2.2.C.1h) | 1 |
| Nearside Front Steering component mounting prescribed area is excessively corroded wheel arch (2.2.C.1h) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded chassis rail (2.4.A.3) | 1 |
| Offside Front Outer Suspension component mounting prescribed area is excessively corroded chassis rail (2.4.A.3) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch (2.4.A.3) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch (2.4.A.3) | 1 |
| Nearside Outer Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c) | 1 |
| Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
| Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Fuel system component leaking excessively or a risk of fire under bonnet (6.1.3 (b) (ii)) | 1 |
| Exhaust emissions carbon monoxide content excessive 9.8% (8.2.1.2 (b)) | 1 |
| Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Front Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2) | 1 |
| Offside Steering system has a road wheel fouling a part of the vehicle |2.2.D.2a| | 1 |
| Nearside Rear Brake hose bulging under pressure |3.6.B.3| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Front position lamp(s) not working (1.1.A.3b) | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Nearside Front coil spring cracked |2.4.C.1a| | 1 |
| Offside Front Seat belt stitching badly frayed |5.2.2b| | 1 |
| Nearside Rear Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Steering locking device missing offside inner and nearside outer track rod end split pins missing (2.1.3 (d)) | 1 |
| Nearside Front Brake pipe at imminent risk of failure or fracture brake pipe failed on roller brake test, became disconnected under pressure (1.1.11 (a)) | 1 |
| Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) | 1 |
| Position lamp switch faulty |1.1.A.1| | 1 |
| Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Seat belt retracting mechanism defective (5.2.5b) | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3) | 1 |
| Offside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Headlamp switch faulty |1.7.1| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Brake pedal anti-slip provision missing (1.1.2 (c)) | 1 |
| Offside Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Exhaust engine idle speed too high |7.3.A.2a| | 1 |
| Exhaust emits dense blue smoke at idle |7.3.A.2b| | 1 |
| Nearside Headlamp not in good working order |not working| |1.2.4a| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Service brake: efficiency below requirements |3.7.D.4| | 1 |
| Position lamp switch insecure |1.1.A.1| | 1 |
| Rear Braking system leaking |3.6.A.1| | 1 |
| Nearside Rear Braking system leaking |3.6.A.1| | 1 |
| Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Nearside Rear Exhaust mounting missing |7.1.1b| | 1 |
| Offside Rear Shock absorber has a serious fluid leak (2.7.3) | 1 |
| Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c) | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill back inadequate repair (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 1 |
| Exhaust mounting missing |7.1.1b| | 1 |
| Offside Rear Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Front Headlamp switch faulty (1.7.1) | 1 |
| Horn not working (1.6.2a) | 1 |
| Offside Outer Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 1 |
| Nearside Rear Floor excessively deteriorated Floor corroded and holed close to rear suspension mounting (6.2.4 (a) (i)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Offside Front Service brake excessively binding |1.2.1 |f|| | 1 |
| Offside Rear Service brake excessively binding |1.2.1 |f|| | 1 |
| Brake performance not tested |1.2.1 |g|| | 1 |
| Front An item not tested |Manual| | 1 |
| Nearside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Steering system has excessive free play detected at the steering wheel |steering box fitted| |2.2.A.1a| | 1 |
| Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Nearside Indicator tell tale inoperative |1.4.A.2a| | 1 |
| Nearside Rear Radius arm attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Rear Radius arm attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 1 |
| Front Horn not working |1.6.2a| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Brake performance not tested both offside wheels have restricted movement suspect brakes partially siezed (1.2.1 (g)) | 1 |
| Exhaust emissions - engine idle speed too high (8.2.1.2 (e)) | 1 |
| Central Exhaust system insecure rubber support broken,may need religning to reduce tension (6.1.2 (a)) | 1 |
| Front Sub-frame pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Exhaust has a major leak of exhaust gases (7.1.2) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Offside Steering component mounting prescribed area is excessively corroded (2.2.C.1h) | 1 |
| Nearside Seat belt anchorage loose (7.1.1 (b)) | 1 |
| Nearside Headlamp levelling device inoperative (4.1.5 (a)) | 1 |
| Offside Headlamp levelling device inoperative (4.1.5 (a)) | 1 |
| Brake pedal anti-slip provision loose (1.1.2 (c)) | 1 |
| Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Offside Front Brake hose bulging under pressure (3.6.B.3) | 1 |
| Steering component mounting prescribed area is excessively corroded nearside front floor near steering idler mounting (2.2.C.1h) | 1 |
| Offside Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
| Offside Headlamp not working on dipped beam (1.7.5a) | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting fractured (2.4.G.1) | 1 |
| Offside front brake binding (3.7.B.1) | 1 |
| Nearside Obligatory mirror insecure |8.1.1| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Headlamp not working on main beam |1.7.5a| | 1 |
| Nearside Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Offside Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Offside Indicator tell tale inoperative |1.4.A.2a| | 1 |
| Offside Front Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
| Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Nearside Rear Service brake grabbing severely (1.2.1 (c)) | 1 |
| Offside Rear Service brake grabbing severely (1.2.1 (c)) | 1 |
| Nearside Inner Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Headlamp aim beam image too far to the right |1.6.B4| | 1 |
| Nearside Front Headlamp aim beam image too far to the left |1.6.B4| | 1 |
| Offside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 1 |
| Offside Rear Vehicle structure has an inadequate repair which adversely affects braking or steering (6.1.A.1) | 1 |
| Windscreen has damage | 1 |
| Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Anti-lock braking system warning lamp indicates an ABS fault | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Direction indicator not working |1.4.A.2c| | 1 |
| Offside Rear Brake hose leaking |3.6.A.1| | 1 |
| Offside Inner Rear Drive shaft which forms part of the suspension coupling gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
| Brake hose damaged | 1 |
| Offside Front Seat belt damaged sufficient to significantly weakened the webbing (5.2.2a) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg (6.2.2 (d) (i)) | 1 |
| Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Front Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion sill to floor near subframe mounting |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion floor to sill |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion chassis close to engine mounting |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion rear wheel arch to sill |6.1.C.1| | 1 |
| Nearside Body has a sharp edge caused by corrosion sill corroded |6.1.C.1| | 1 |
| Nearside Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
| Nearside Front Shock absorber has a serious fluid leak (2.7.3) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner seal corroded. (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner seal corroded. (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wheel arch (6.2.2 (d) (i)) | 1 |
| Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
| Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
| Front passenger seat cannot be secured in the upright position. |6.2.4| | 1 |
| Exhaust system not adequately supported |7.1.1| | 1 |
| Nearside Front Sub-frame pin or bush excessively worn rear bush (5.3.4 (a) (i)) | 1 |
| Offside Front Sub-frame pin or bush excessively worn rear bush (5.3.4 (a) (i)) | 1 |
| Offside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 1 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Mechanical brake component has restricted free movement | 1 |
| Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
| Nearside Seat belt damaged sufficient to significantly weakened the webbing (5.2.2a) | 1 |
| Speedometer cannot be illuminated. (6.7.3) | 1 |
| Offside Front brake disc contaminated by oil (3.5.1h) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength boot floor |5.3.6 |a| |i|| | 1 |
| Nearside Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Nearside Rear Body component corroded and likely to cause injury wheel arch |6.2.1 |a| |i|| | 1 |
| Nearside Rear Lower Body component likely to become detached vallance |6.2.1 |a| |ii|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced b pillar |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |