Most common failures | No# failures |
---|
Brake pipe excessively corroded | 7 |
Windscreen wiper does not clear the windscreen effectively | 6 |
Headlamp aim out of alignment | 2 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
An item not tested |Manual| | 1 |
Offside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Front Steering damper leaking oil |2.2.C.1f| | 1 |
Nearside Front Suspension arm worn and seriously weakened |2.4.G.1| | 1 |
Offside Front Suspension arm worn and seriously weakened |2.4.G.1| | 1 |
Steering box has relative movement between sector shaft and the drop arm |2.2.B.1b| | 1 |
Drivers seat backrest cannot be secured in the upright position. (6.2.5 (b) (ii)) | 1 |
Passengers seat backrest cannot be secured in the upright position. (6.2.6 (a) (i)) | 1 |
Oil leaking continuously from engine posing a serious risk to road safety (8.4.1 (a) (ii)) | 1 |
Oil leaking continuously from transmission posing a serious risk to road safety (8.4.1 (a) (ii)) | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Subframe mounting (6.1.1 (c) (i)) | 1 |
Power steering component(s) leaking (2.3.3b) | 1 |
Nearside Front Shock absorber has a serious fluid leak (2.7.3) | 1 |
Parking brake lever has no reserve travel (3.1.6b) | 1 |
Parking brake: efficiency below requirements (3.7.B.7) | 1 |
Exhaust emissions carbon monoxide content excessive (7.3.B.1a) | 1 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Headlamp reflector seriously defective (4.1.1 (b) (ii)) | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill (7.1.1 (a) (i)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
Nearside Front Lower Suspension component ball joint dust cover missing (5.3.4 (b) (ii)) | 1 |
Offside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Brake hose connection leaking on an air braking system (1.1.12 (c) (i)) | 1 |
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Rear Exhaust system insecure (6.1.2 (a)) | 1 |
Windscreen washer not working | 1 |
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded 4 areas of corrosion within this point (2.4.A.3) | 1 |
Nearside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
Offside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 1 |
Registration plate issues | 1 |
Nearside Headlamp not working on dipped beam (1.7.5a) | 1 |
Offside rear brake grabbing severely (3.7.A.5b) | 1 |
Nearside Front Front position lamp(s) not working (1.1.A.3b) | 1 |
Registration plate lamp issues | 1 |
Rear fog lamp tell tale not working (1.3.1b) | 1 |