| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 4 |
| Nearside Headlamp not working on main beam (1.7.5a) | 3 |
| Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3) | 2 |
| Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3) | 2 |
| Registration plate lamp issues | 2 |
| Rear Exhaust has a major leak of exhaust gases (7.1.2) | 2 |
| Brake hose excessively deteriorated | 2 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill /jacking point (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill jacking point (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill and jacking point (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner jacking point (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting around spring mountings both sides (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross member (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out rigger to floor and rear cross member (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting out rigger and floor and rear cross member (6.2.2 (d) (i)) | 1 |
| Front Exhaust system insecure (6.1.2 (a)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch chassis leg front (6.2.2 (d) (i)) | 1 |
| Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength both sides (5.3.6 (a) (i)) | 1 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded and offside rear backing sills (2.4.A.3) | 1 |
| Offside Headlamp not working on dipped beam (1.7.5a) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6) | 1 |
| Front Exhaust has a major leak of exhaust gases (7.1.2) | 1 |
| Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
| Offside Inner Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2) | 1 |
| Nearside Headlamp not working on dipped beam (1.7.5a) | 1 |
| Offside Outer Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
| Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a) | 1 |
| Steering system excessively rough (2.2.D.1) | 1 |
| Front brake excessively fluctuating | 1 |
| Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2) | 1 |
| Centre Front Exhaust system not adequately supported (7.1.1) | 1 |
| Offside Rear Rear fog lamp not working (1.3.2b) | 1 |
| Nearside Front Headlamp not working on main beam (1.7.5a) | 1 |
| Offside Inner Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a) | 1 |
| Centre Rear Brake load sensing valve seized (3.6.E.3) | 1 |
| Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2) | 1 |
| Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2) | 1 |
| Nearside Front Lower Anti-roll bar has excessive play in a ball joint (2.4.G.2) | 1 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2) | 1 |
| Offside Front Lower Anti-roll bar linkage insecure (2.4.G.1) | 1 |
| Nearside Front Headlamp insecure bulb insecure (4.1.1 (c)) | 1 |
| Offside Rear Exhaust has part of the system excessively deteriorated (7.1.1a) | 1 |
| Exhaust has part of the system excessively deteriorated (7.1.1a) | 1 |
| Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Headlamp aim not tested (4.1.2 (b)) | 1 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Nearside Rear Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 1 |
| Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |