| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 17 |
| Brake pipe excessively corroded | 13 |
| Service brake: efficiency below requirements |3.7.B.7| | 10 |
| Registration plate lamp issues | 9 |
| Headlamp aim out of alignment | 9 |
| Brake hose excessively deteriorated | 8 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
| Rear brake application uneven | 5 |
| Hazard warning switch faulty |1.4.B.1d| | 5 |
| Exhaust system not adequately supported |7.1.1| | 5 |
| Brakes imbalanced across an axle | 5 |
| Parking brake: efficiency below requirements |3.7.B.7| | 4 |
| Offside Rear fog lamp not working |1.3.2b| | 4 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 3 |
| Nearside Headlamp not working on main beam |1.7.5a| | 3 |
| Offside Side repeater not working |1.4.A.2c| | 3 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 3 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 3 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 3 |
| Rear fog lamp not working |1.3.2b| | 3 |
| Rear fog lamp tell tale not working |1.3.1b| | 3 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Fuel tank leaking |7.2.3| | 3 |
| Registration plate issues | 3 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 3 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 2 |
| Nearside Rear Stop lamp not working |1.2.1b| | 2 |
| Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Indicator switch faulty |1.4.A.1| | 2 |
| Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
| Hazard warning lamps inoperative |1.4.B.1b| | 2 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 2 |
| Direction indicators not working |1.4.A.2c| | 2 |
| Nearside Indicator tell tale inoperative |1.4.A.2a| | 2 |
| Nearside Side repeater not working |1.4.A.2c| | 2 |
| Offside Stop lamp not working |1.2.1b| | 2 |
| Rear Exhaust system not adequately supported |7.1.1| | 2 |
| Offside Rear Braking system leaking |3.6.A.1| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a| | 2 |
| rear brakes release unevenly |3.7.B.4| | 2 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 2 |
| Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect beam kicks to offside (4.1.2 (c)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect beam kicks to offside (4.1.2 (c)) | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Nearside Rear Rear reflector missing |1.5.1a| | 1 |
| Offside Rear Rear reflector missing |1.5.1a| | 1 |
| Nearside Front Side repeater incomplete |1.5.A1b| | 1 |
| Nearside Front Side repeater not working |1.4.A.2c| | 1 |
| Nearside Headlamp aim not tested |1.8.A.1c| | 1 |
| Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Offside Front Upper Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Fuel cap/sealing device sealing washer deteriorated |7.2.4c| | 1 |
| Offside Outer Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Rear Braking system leaking |3.6.A.1| | 1 |
| Fuel pipe leaking |7.2.3| | 1 |
| Nearside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Front front brake binding |3.7.B.1| | 1 |
| Offside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Side repeater insecure |1.4.A.2b| | 1 |
| Parking brake lever, pawl mechanism pivot|s| or their associated mountings locking device insecure |3.1.4b| | 1 |
| Offside Rear Brake load sensing valve linkage defective and function impaired |3.6.E.3| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Outer Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Outer Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Front Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Rear Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Front Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Offside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
| Offside Rear Stop lamp not working |1.2.1b| | 1 |
| Indicator tell tale inoperative |1.4.A.2a| | 1 |
| Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b|| | 1 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Rear Exhaust mounting missing |7.1.1b| | 1 |
| Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill paneling near spring anchor (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired floor/paneling repair near spring hanger (5.3.6 (a) (i)) | 1 |
| Exhaust system insecure Centre. Clamp not secure (6.1.2 (a)) | 1 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Exhaust system insecure (6.1.2 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower panel near spring anchor split (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to old patch on underside & weld ends of patch continuosly (5.3.6 (a) (i)) | 1 |
| Offside Front Brake hose excessively damaged (1.1.12 (b) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Underside & rear of step (7.1.1 (a) (i)) | 1 |
| Nearside Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Offside Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Offside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
| Offside Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Central Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Rear Exhaust system insecure |6.1.2 |a|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced also has a
plate welded but not contineusly |6.1.1 |c| |i|| | 1 |
| Oil leaking excessively from engine |8.4.1 |a| |i|| | 1 |
| Oil leaking excessively from transmission |8.4.1 |a| |i|| | 1 |
| Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Headlamp aim projected beam image is obviously incorrect both |4.1.2 |c|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at spring hanger |5.3.6 |a| |i|| | 1 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Fuel tank insecure |7.2.1| | 1 |
| Offside Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Nearside Side repeater incorrect colour |1.4.A.2f| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Emissions not tested |7.0| | 1 |
| Brake load sensing valve seized |3.6.E.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Offside Front Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 1 |
| Offside Front Brake hose bulging under pressure |1.1.12 |d|| | 1 |
| Fuel pipe leaking excessively or a risk of fire |6.1.3 |b| |ii|| | 1 |
| Brake performance not tested |1.2.1 |g|| | 1 |
| Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
| Offside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
| Rear brake binding | 1 |
| Rear Rear fog lamp not working |1.3.2b| | 1 |
| Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Front Shock absorber has an excessively worn shock absorber pivot |2.7.4| | 1 |
| Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Service brake: efficiency below requirements |3.7.C.1a| | 1 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
| Offside Front Driver`s seat insecure |6.2.A.1| | 1 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Nearside Front Shock absorber insecure |2.7.2b| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Fuel pipe leaking |7.2.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Nearside Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
| Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Rear Brake load sensing valve linkage obviously incorrectly adjusted |3.6.E.3| | 1 |
| Offside Front Fuel hose leaking |7.2.3| | 1 |
| Nearside Front Headlamps matched pair are incorrectly positioned |1.7.3| | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Headlamp not working on main beam |1.7.5a| | 1 |
| Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Rear Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Offside Rear Rear fog lamp insecure |1.3.2a| | 1 |
| Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Windscreen wiper blade missing |8.2.2| | 1 |
| Offside Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 1 |
| Rear fog lamp switch inoperative |4.5.3 |a| |ii|| | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 1 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Front brake disc excessively pitted |3.5.1h| | 1 |
| Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Fuel pipe leaking |7.2.3| | 1 |
| Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Front Direction indicators not working |1.4.A.2c| | 1 |
| Centre Exhaust system not adequately supported |7.1.1| | 1 |
| Front Exhaust system not adequately supported |7.1.1| | 1 |
| Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
| Front brake disc in such a condition that it is seriously weakened | 1 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Horn sounds harsh or grating |1.6.2e| | 1 |
| Front brake application uneven | 1 |
| Bootlid cannot be secured in the closed position |6.4.1| | 1 |
| Front passenger seat insecure |6.2.3| | 1 |