Most common failures | No# failures |
---|
Service brake: efficiency below requirements |3.7.B.7| | 7 |
Registration plate lamp issues | 5 |
Brake pipe excessively corroded | 5 |
Windscreen wiper does not clear the windscreen effectively | 4 |
Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Indicator switch faulty |1.4.A.1| | 2 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear brake application uneven | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Brakes imbalanced across an axle | 2 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front Statutory seat belt missing |5.1.1| | 2 |
Nearside Front Statutory seat belt missing |5.1.1| | 2 |
Registration plate issues | 2 |
Front brake application uneven | 2 |
Headlamp aim out of alignment | 2 |
Nearside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Bonnet retaining device ineffective |8.4.2| | 1 |
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 1 |
Horn not working |1.6.2a| | 1 |
Brake load sensing valve linkage defective and function impaired |3.6.E.3| | 1 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Rear Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Offside Inner Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Offside Inner Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Nearside Inner Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
All position lamps not working |1.1.A.3b| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Nearside Rear reflector missing |1.5.1a| | 1 |
Steering column movement between the shaft and steering wheel |2.1.2b| | 1 |
Brake pedal creeps down when held under pressure |3.3.B.1a| | 1 |
Offside Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Nearside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
Offside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
Rear Brake hose bulging under pressure |3.6.B.3| | 1 |
Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
Offside Front brake disc excessively pitted |3.5.1h| | 1 |
Front brake disc excessively pitted |3.5.1h| | 1 |
Offside Front Brake pipe inadequately supported |3.6.B.1| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Front Shock absorber insecure |2.7.2b| | 1 |
Offside Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 1 |
Offside Rear Braking system leaking |3.6.A.1| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Emissions not tested |7.0| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Offside Side repeater incomplete |1.5.A1b| | 1 |
Nearside Front Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Front Statutory seat belt missing |5.1.1| | 1 |
Centre Exhaust mounting missing |7.1.1b| | 1 |
Nearside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a| | 1 |
Offside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Indicator tell tale inoperative |1.4.A.2a| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Outer Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Rear Leaf spring to axle securing nut insecure |2.4.B.7b| | 1 |
Offside Rear Lower Shock absorber has an excessively worn bush |2.7.4| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Rear parking brake recording little or no effort | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Headlamp not working on dipped beam both |1.7.5a| | 1 |
Headlamp not working on main beam both |1.7.5a| | 1 |
Centre Exhaust system not adequately supported |7.1.1| | 1 |