Most common failures | No# failures |
---|
Headlamp aim out of alignment | 16 |
Registration plate lamp issues | 4 |
Brake pipe excessively corroded | 3 |
Exhaust engine idle speed too high |7.3.A.2a| | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Battery insecure |1.9.1| | 2 |
Nearside Front front brake binding |3.7.B.1| | 2 |
Offside Stop lamp not working |1.2.1b| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Offside Front Brake hose bulging under pressure |3.6.B.3| | 2 |
Front brake application uneven | 2 |
Offside Obligatory mirror missing |8.1.1| | 1 |
Nearside Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Parking brake lever ratchet mechanism is broken |3.1.5| | 1 |
Rear brake binding | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Offside Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
Offside Rear front brake recording little or no effort |3.7.B.5a| | 1 |
Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
Nearside Rear front brake binding |3.7.B.1| | 1 |
Offside Rear front brake binding |3.7.B.1| | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
Offside Front Brake pipe leaking |3.6.A.1| | 1 |
Registration plate issues | 1 |
Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Front Suspension arm inappropriately repaired |2.4.A.2| | 1 |
Nearside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Front Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
Offside Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Windscreen wiper does not clear the windscreen effectively | 1 |
Nearside Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Offside Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Offside Front Inner Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 1 |
Nearside Front suspension has excessive play in a upper wishbone bearing |2.5.B.1a| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Parking brake lever defective so that it cannot be satisfactorily operated |3.1.3c| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Horn not working |1.6.2a| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |