Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 6 |
Registration plate issues | 5 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Headlamp aim out of alignment | 5 |
Registration plate lamp issues | 4 |
Horn not working |1.6.2a| | 4 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 4 |
Offside Front position lamp|s| not working |1.1.A.3b| | 4 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 3 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Rear parking brake recording little or no effort | 3 |
Battery insecure |1.9.1| | 2 |
Offside Headlamp not working on main beam |1.7.5a| | 2 |
Indicator switch faulty |1.4.A.1| | 2 |
Offside Rear Stop lamp not working |1.2.1b| | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear Exhaust system not adequately supported |7.1.1| | 2 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
Offside Stop lamp not working |1.2.1b| | 2 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Fuel system component leaking |7.2.3| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
Nearside Headlamp not working on main beam |1.7.5a| | 2 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Rear Brake hose bulging under pressure |3.6.B.3| | 1 |
Rear brake application uneven | 1 |
rear brakes release unevenly |3.7.B.4| | 1 |
Brakes imbalanced across an axle | 1 |
Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c)) | 1 |
Fuel hose leaking |6.1.3 |b| |i|| | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Rear Mechanical brake component has restricted free movement | 1 |
Nearside Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
Steering damper leaking oil |2.2.C.1f| | 1 |
Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Rear Parking brake lever defective so that it cannot be satisfactorily operated |3.1.3c| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Brake hose has insufficient room to move | 1 |
Nearside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Fuel hose leaking |7.2.3| | 1 |
Rear brake binding | 1 |
Fuel pipe leaking |7.2.3| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Centre Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Inner Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Lower Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Mechanical brake component has restricted free movement | 1 |
Brake hose excessively deteriorated | 1 |
Nearside Steering pivot point has excessive play |2.2.B.1g| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Brake pipe excessively corroded | 1 |
Steering system excessively rough |2.2.D.1| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Nearside Rear brake caliper leaking |3.6.A.1| | 1 |
Nearside Rear Brake hose leaking |3.6.A.1| | 1 |
Offside Front Brake hose excessively damaged |3.6.B.4d| | 1 |
Driver`s seat insecure |6.2.A.1| | 1 |
Nearside Front Shock absorber has negligible damping effect |2.7.5| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Offside Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 1 |
Nearside Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |