Most common failures | No# failures |
---|
Headlamp aim out of alignment | 31 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 22 |
Registration plate lamp issues | 22 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 20 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 19 |
Brake hose excessively deteriorated | 18 |
Brake pipe excessively corroded | 17 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 16 |
Parking brake: efficiency below requirements |3.7.B.7| | 15 |
Windscreen wiper does not clear the windscreen effectively | 14 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 13 |
Brakes imbalanced across an axle | 10 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 10 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 7 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 7 |
Rear Exhaust system not adequately supported |7.1.1| | 7 |
Rear parking brake recording little or no effort | 7 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 7 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
Registration plate issues | 6 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
Rear brake binding | 6 |
Nearside Rear Stop lamp not working |1.2.1b| | 5 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 5 |
Nearside Stop lamp not working |1.2.1b| | 5 |
Offside Front position lamp|s| not working |1.1.A.3b| | 5 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 4 |
Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 4 |
Offside Front front brake binding |3.7.B.1| | 4 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 4 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 3 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Front brake application uneven | 3 |
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 3 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Stop lamp not working |1.2.1b| | 3 |
Offside Rear fog lamp not working |1.3.2b| | 3 |
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 3 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 3 |
Offside Headlamp not working on dipped beam |1.7.5a| | 3 |
Power steering component|s| leaking |2.3.3b| | 2 |
Offside Front Headlamp not working on main beam |1.7.5a| | 2 |
Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 2 |
Offside Rear Shock absorber has negligible damping effect |2.7.5| | 2 |
Offside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 2 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 2 |
Nearside Front front brake binding |3.7.B.1| | 2 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
Front passenger seat cannot be secured in the upright position. |6.2.4| | 2 |
Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 2 |
Fuel system component leaking |7.2.3| | 2 |
Offside Front coil spring fractured |2.4.C.1a| | 2 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 2 |
Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Brake performance not tested |3.7.A.1| | 2 |
Offside front brake binding |3.7.B.1| | 2 |
Exhaust mounting missing |7.1.1b| | 2 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
Offside Headlamp not working on main beam |1.7.5a| | 2 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
Exhaust system not adequately supported |7.1.1| | 2 |
Offside Front Direction indicators not working |1.4.A.2c| | 2 |
Offside Rear fog lamp insecure |1.3.2a| | 2 |
Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Rear wheel bearing has excessive play |2.6.2| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded marked with blue calk |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Oil leaking excessively from engine |8.4.1 |a| |i|| | 1 |
Offside Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Rear Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Brake hose damaged | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Offside Front Upper Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
Nearside Front Floor excessively deteriorated |6.2.4 |a| |i|| | 1 |
Offside Rear Sub-frame pin or bush excessively worn front bush |5.3.4 |a| |i|| | 1 |
Offside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear coil spring incomplete |2.4.C.1a| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Fuel hose leaking |7.2.3| | 1 |
Battery insecure |1.9.1| | 1 |
front brakes release unevenly |3.7.B.4| | 1 |
Nearside Rear Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
Offside Rear Rear position lamp|s| incomplete |1.1.4a| | 1 |
Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Front Outer Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Offside Front Outer Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Wheel stud|s| loose |4.2.A.1e| | 1 |
Offside Outer Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Rear Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
Nearside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Upper Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Lower Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
All position lamps not working |1.1.A.3b| | 1 |
Emissions not tested |7.0| | 1 |
Nearside Front Seat belt retracting mechanism defective |5.2.5b| | 1 |
Exhaust engine idle speed too high |7.3.A.2a| | 1 |
Rear passenger seat cannot be secured in the upright position. |6.2.3| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Power steering pipe|s| or hose|s| leaking |2.3.3b| | 1 |
Offside Front Steering column shaft deformed and unserviceable |2.2.C.1d| | 1 |
Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Rear Seat belt not functioning as intended (7.1.2 (c)) | 1 |
Nearside Rear Brake hose bulging under pressure (3.6.B.3) | 1 |
Nearside Rear Inner Subframe mounting prescribed area is excessively corroded sill (2.4.A.3) | 1 |
Hazard warning lamps inoperative (1.4.B.1b) | 1 |
Battery insecure (1.9.1) | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
Drivers seat insecure (6.2.5 (a) (ii)) | 1 |
Offside Front Position lamp not working (4.2.1 (a)) | 1 |
Nearside Rear Parking brake inoperative on one side (1.4.1 (a)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Rear Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Offside Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Fuel hose leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
Offside Front Driver`s door does not latch securely closed |6.2.B.1a| | 1 |
Fuel tank leaking |7.2.3| | 1 |
Nearside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
Nearside Front Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 1 |
Exhaust emissions carbon monoxide content excessive 6.06% |7.3.B.1a| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Front Passenger`s seat backrest cannot be secured in the upright position. |6.2.6 |a| |i|| | 1 |
Battery insecure and likely to fall from carrier |4.13 |a| |ii|| | 1 |
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing .....subframe mounting |5.3.6 |a| |i|| | 1 |
Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b|| | 1 |
Nearside Rear Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Offside Rear Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front coil spring cracked |2.4.C.1a| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Rear Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Steering wheel retaining device missing |2.1.6| | 1 |
Offside Front Seat belt webbing significantly stretched |7.1.2 |b| |ii|| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Front Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
Horn emits two or more alternating tones |1.6.2d| | 1 |
Offside Headlamp not in a clean condition affecting beam image |1.2.4a| | 1 |
Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Parking brake: efficiency below requirements |3.7.D.4| | 1 |
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Front Fuel pipe leaking |7.2.3| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Rear Exhaust mounting missing |7.1.1b| | 1 |
Nearside Sub-frame attachment rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Rear Upper Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Upper Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Offside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Exhaust emits visible black smoke at idle |7.3.A.2b| | 1 |
Exhaust emits clearly visible black smoke during acceleration |7.3.A.2c| | 1 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
Nearside Rear Fuel hose excessively damaged fuel line detereorated |7.2.2| | 1 |
Nearside Front Battery insecure |1.9.1| | 1 |
Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
Offside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Rear Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Rear Fuel pipe leaking |7.2.3| | 1 |
Offside Rear Brake hose leaking |3.6.A.1| | 1 |
Offside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 1 |
Nearside Front Lower Ball joint has excessive play |2.2.B.1f| | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Nearside front brake juddering severely |3.7.A.2b| | 1 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Front Anti-roll bar linkage corroded and seriously weakened |2.4.G.1| | 1 |
Offside Front Anti-roll bar linkage corroded and seriously weakened |2.4.G.1| | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Offside Front Brake hose leaking |3.6.A.1| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Front Position lamp not working |4.2.1 |a|| | 1 |
Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Nearside Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Exhaust emits dense blue smoke at idle |7.3.A.2b| | 1 |
Nearside Steering pivot point has excessive play steering idler |2.2.B.1g| | 1 |
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
Nearside Front passenger seat cannot be secured in the upright position. |6.2.4| | 1 |
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Nearside Rear Brake hose excessively twisted |1.1.12 |b| |ii|| | 1 |
Offside Rear Rear fog lamp does not emit a steady red light |4.5.4 |a|| | 1 |
Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
Offside Rear fog lamp does not emit a steady red light |1.3.2e| | 1 |
Nearside Rear fog lamp emits a light other than red |1.3.2e| | 1 |
Offside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps |1.7.4b| | 1 |
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
Windscreen washer not working | 1 |
Outer Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Nearside Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Exhaust has a part missing |7.1.1a| | 1 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Rear brake application uneven | 1 |
Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
Rear fog lamp insecure |1.3.2a| | 1 |
Offside Rear Rear position lamp|s| insecure |1.1.A.3a| | 1 |
Nearside Brake pipe inadequately clipped |3.6.B.1| | 1 |
Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Front Headlamp insecure |1.7.3| | 1 |
Rear Fuel hose leaking |7.2.3| | 1 |
Offside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded outer sill corroded |2.4.A.3| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
Rear Fuel system component leaking |7.2.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded under wing |2.4.A.3| | 1 |
Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Service brake excessively binding |1.2.1 |f|| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Central Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
Central Exhaust has a major leak of exhaust gases silencer (6.1.2 (a)) | 1 |
Nearside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
Nearside Front Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Lower Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |