MOT History from tests of diesel MERCEDES BENZ 220s year 1973

Review the list of common MERCEDES BENZ 220 failures below or to perform a specific mot history check on your MERCEDES BENZ then use our popular KnowYourCar service

mot history

Pass percent:62.50%

(The average a diesel MERCEDES BENZ 220 year 1973 passes without issue)

Based on:16 MOT Tests

Most common failures	No# failures
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Brake hose has insufficient room to move	2
Rear Stop lamp not working \|1.2.1b\|	1
Registration plate lamp issues	1
Nearside Rear Direction indicator insecure \|1.4.A.2b\|	1
Nearside Front Headlamp aim beam image kick up to the offside \|1.8\|	1
Offside Front Headlamp aim beam image kick up to the offside \|1.8\|	1
Nearside Front Sub-frame rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1
Offside Front Sub-frame rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1
Rear Body has a projection caused by corrosion \|6.1.C.1\|	1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering \|6.1.A.1\|	1
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering \|6.1.A.1\|	1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering \|6.1.A.1\|	1
Indicator switch faulty \|1.4.A.1\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front An item not tested \|Manual\|	1
Offside Front Front wheel bearing rough when rotated \|2.5.A.2\|	1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside front brake binding \|3.7.B.1\|	1
Offside Front Brake hose twisted \|found during steering lock to lock check\| \|2.2.D.2b\|	1
Battery insecure \|1.9.1\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Brake hose has insufficient room to move	2
Rear Stop lamp not working \|1.2.1b\|	1
Registration plate lamp issues	1
Nearside Rear Direction indicator insecure \|1.4.A.2b\|	1
Nearside Front Headlamp aim beam image kick up to the offside \|1.8\|	1
Offside Front Headlamp aim beam image kick up to the offside \|1.8\|	1
Nearside Front Sub-frame rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1
Offside Front Sub-frame rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1
Rear Body has a projection caused by corrosion \|6.1.C.1\|	1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering \|6.1.A.1\|	1
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering \|6.1.A.1\|	1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering \|6.1.A.1\|	1
Indicator switch faulty \|1.4.A.1\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front An item not tested \|Manual\|	1
Offside Front Front wheel bearing rough when rotated \|2.5.A.2\|	1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside front brake binding \|3.7.B.1\|	1
Offside Front Brake hose twisted \|found during steering lock to lock check\| \|2.2.D.2b\|	1
Battery insecure \|1.9.1\|	1

MOT History from tests of diesel MERCEDES BENZ 220s year 1973

Find us on Facebook