Most common failures | No# failures |
---|
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 4 |
Headlamp aim out of alignment | 3 |
Registration plate lamp issues | 3 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
Nearside Rear Body has a sharp edge caused by damage |6.1.C.1| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Brakes imbalanced across an axle | 2 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Headlamp not working on main beam |1.7.5a| | 2 |
Hazard warning switch faulty |1.4.B.1d| | 2 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Drag link end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Exhaust engine idle speed too high |7.3.A.2a| | 1 |
Windscreen wiper does not clear the windscreen effectively | 1 |
Headlamp switch insecure |1.7.1| | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Offside Front Headlamp not working on main beam |1.7.5a| | 1 |
Direction indicators not working |1.4.A.2c| | 1 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Rear Body has excessive displacement which may lead to loss of vehicle control |6.1.B.1a| | 1 |
Offside Rear Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
Nearside Front Direction indicators incorrect colour |1.4.A.2f| | 1 |
Nearside Rear Leaf spring cracked |2.4.B.1a| | 1 |
Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
Offside Rear fog lamp not visible from a reasonable distance |1.1.6b| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Nearside Side repeater incomplete |1.5.A1b| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Indicator switch faulty |1.4.A.1| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Offside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Windscreen wiper blade insecure | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Rear Rear fog lamp not working |1.3.2b| | 1 |
Rear Rear fog lamp insecure |1.3.2a| | 1 |
Fuel cap/sealing device mounting flange/sealing method defective |7.2.4c| | 1 |
Centre Exhaust has a part missing |7.1.1a| | 1 |
Brake pipe excessively corroded | 1 |
Registration plate issues | 1 |
Nearside Side repeater incorrect colour |1.4.A.2f| | 1 |
Brake hose excessively deteriorated | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear brake application uneven | 1 |
Brake pedal creeps down while the pedal is held under pressure |3.3.B.1a| | 1 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |