Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 8 |
Offside Rear fog lamp not working |1.3.2b| | 6 |
Exhaust has a major leak of exhaust gases |7.1.2| | 5 |
Brake pipe excessively corroded | 5 |
Headlamp aim out of alignment | 5 |
Rear fog lamp not working |1.3.2b| | 4 |
Registration plate lamp issues | 4 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 3 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 3 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Rear brake application uneven | 2 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Position lamp not working |4.2.1 |a|| | 2 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Headlamp aim beam image kick up to the offside |1.8| | 2 |
Brake performance not tested |3.7.A.1| | 1 |
Emissions not tested |7.0| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded and functionality of the braking system is affected Servo (1.1.21 (e) (ii)) | 1 |
Steering box has excessive free play detected at the steering wheel (steering box fitted) (2.3 (a) (i)) | 1 |
Offside Axle king pin is loose in the axle beam (5.1.2 (d) (i)) | 1 |
Brake load sensing valve inoperative and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Nearside Body insecure Centre body mount (6.2.2 (a) (i)) | 1 |
Offside Body insecure Centre body mount (6.2.2 (a) (i)) | 1 |
Fuel pipe insecure Fuel filler neck corroded (6.1.3 (a) (i)) | 1 |
Nearside Front Passenger`s seat insecure |6.2.A.1| | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Front Service brake juddering severely |3.7.C.2| | 1 |
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Registration plate issues | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 1 |
Offside Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded floor area |1.1.21 |e| |i|| | 1 |
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded inner wheel arch/chassis area |1.1.21 |e| |i|| | 1 |
Offside Front Drag link end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Offside Seat belt retracting mechanism defective |5.2.5b| | 1 |
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Drag link end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Rear Brake hose leaking |3.6.A.1| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Offside Front Statutory seat belt missing |5.1.1| | 1 |
Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Front An item not tested |Manual| | 1 |
Brakes imbalanced across an axle | 1 |
Offside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a| | 1 |
Nearside Front Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
Windscreen wiper blade insecure | 1 |
Steering system has excessive free play detected at the steering wheel |steering box fitted| |2.2.A.1a| | 1 |
Steering system excessively tight |2.2.D.1| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Rear Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear parking brake recording little or no effort | 1 |