Most common failures | No# failures |
---|
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 7 |
Windscreen wiper does not clear the windscreen effectively | 6 |
Brakes imbalanced across an axle | 4 |
Offside Rear fog lamp not working |1.3.2b| | 4 |
Registration plate issues | 3 |
Registration plate lamp issues | 3 |
Rear brake application uneven | 3 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Brake pipe excessively corroded | 3 |
Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Indicator switch faulty |1.4.A.1| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Front brake disc in such a condition that it is seriously weakened | 2 |
Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Fuel cap/sealing device sealing washer missing |7.2.4c| | 2 |
Emissions not tested |7.0| | 2 |
Headlamp aim out of alignment | 2 |
Nearside Front Brake pipe inadequately clipped |3.6.B.1| | 1 |
Brake load sensing valve linkage defective and function impaired |3.6.E.3| | 1 |
Front Upper Spare wheel insecure |6.4.2| | 1 |
Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Body has a projection caused by damage |6.1.C.1| | 1 |
Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
Offside Front brake disc excessively pitted |3.5.1h| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 1 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Nearside Rear Lower Shock absorber has an excessively worn bush |2.7.4| | 1 |
Nearside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
Offside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Brake pedal creeps down while the pedal is held under pressure |3.3.B.1a| | 1 |
Rear parking brake recording little or no effort | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Front brake disc excessively pitted |3.5.1h| | 1 |
Rear Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
Fuel tank leaking |7.2.3| | 1 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Nearside Front Seat belt retracting mechanism defective |5.2.5b| | 1 |
Indicator tell tale inoperative |1.4.A.2a| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Outer Rear brake drum contaminated by oil |3.5.1h| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Nearside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
Offside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
Offside Rear fog lamp insecure |1.3.2a| | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Offside Front Brake pipe inadequately clipped |3.6.B.1| | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Passenger`s seat insecure |6.2.A.1| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Offside Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 1 |
Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i)) | 1 |
Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Rear fog lamp light intensity significantly reduced |4.5.4 |a|| | 1 |
Offside Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
Offside Headlamp aim not tested |4.1.2 |b|| | 1 |
Nearside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
Nearside Passenger`s seat insecure |6.2.6 |a| |ii|| | 1 |
Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.5 |b| |i|| | 1 |
Nearside Rear Brake drum contaminated |1.1.14 |b|| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Offside Front Side repeater not working |1.4.A.2c| | 1 |
Offside Indicator tell tale inoperative |1.4.A.2a| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |