| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 28 |
| Registration plate lamp issues | 16 |
| Brake pipe excessively corroded | 15 |
| Parking brake: efficiency below requirements |3.7.B.7| | 13 |
| Windscreen wiper does not clear the windscreen effectively | 9 |
| Service brake: efficiency below requirements |3.7.B.7| | 8 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
| Rear parking brake recording little or no effort | 7 |
| Offside Rear fog lamp not working |1.3.2b| | 6 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Nearside Rear Shock absorber has an excessively worn bush |2.7.4| | 5 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 4 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 4 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 4 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 4 |
| Exhaust system not adequately supported |7.1.1| | 4 |
| Indicator tell tale inoperative |1.4.A.2a| | 3 |
| Offside Rear Shock absorber has an excessively worn bush |2.7.4| | 3 |
| Nearside Side repeater not working |1.4.A.2c| | 3 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 3 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 3 |
| Brakes imbalanced across an axle | 3 |
| Centre Exhaust system not adequately supported |7.1.1| | 3 |
| Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Rear fog lamp insecure |1.3.2a| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Front Exhaust system not adequately supported |7.1.1| | 3 |
| Rear brake application uneven | 3 |
| Brake load sensing valve linkage seized |3.6.E.3| | 3 |
| Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 2 |
| Exhaust mounting missing |7.1.1b| | 2 |
| Windscreen wiper blade deteriorated |8.2.2| | 2 |
| Nearside Side repeater incomplete |1.5.A1b| | 2 |
| Offside Side repeater not working |1.4.A.2c| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
| Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
| Nearside Front Service brake excessively binding (1.2.1 (f)) | 2 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 2 |
| Rear Exhaust system not adequately supported |7.1.1| | 2 |
| Rear brake binding | 2 |
| Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
| Offside Rear Stop lamp not working |1.2.1b| | 2 |
| Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 2 |
| Service brake: efficiency below requirements |3.7.D.4| | 2 |
| Parking brake: efficiency below requirements |3.7.D.4| | 2 |
| Offside Side repeater incorrect colour |1.4.A.2f| | 2 |
| Offside Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 2 |
| Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 2 |
| Centre Statutory seat belt missing |5.1.1| | 2 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Rear Rear fog lamp not working |1.3.2b| | 2 |
| Front brake disc in such a condition that it is seriously weakened | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Stop lamp not working |1.2.1b| | 2 |
| Nearside front brake binding |3.7.B.1| | 2 |
| Windscreen has damage | 1 |
| Nearside Front Lower Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Lower Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Front Exhaust mounting missing |7.1.1b| | 1 |
| Nearside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a| | 1 |
| Offside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Rear fog lamp not working |1.3.2b| | 1 |
| Front Brake lining|s| less than 1.5 mm thick |3.5.1g| | 1 |
| Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 1 |
| Offside Side repeater missing |1.4.A.2b| | 1 |
| Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Registration plate issues | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded under servo (1.1.21 (e) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch 3 holes (5.3.6 (a) (i)) | 1 |
| Nearside Front Axle king pin is loose in the axle beam (5.1.2 (d) (i)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Offside Front Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Rear Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (1.1.21 (e) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Nearside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 1 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Front Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 1 |
| Nearside Lower Statutory seat belt missing |5.1.1| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Obligatory mirror missing |8.1.1| | 1 |
| Nearside Front Direction indicator incomplete |1.5.A1b| | 1 |
| Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Offside Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
| Offside Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Steering system excessively tight |2.2.D.1| | 1 |
| Front Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2| | 1 |
| Offside Front Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Lower Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
| Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Offside Front Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
| Bonnet cannot be secured in the closed position |8.4.1| | 1 |
| Bonnet retaining device excessively deteriorated |8.4.2| | 1 |
| Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Nearside Statutory seat belt missing |5.1.1| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Front Steering pivot point has excessive play |2.2.B.1g| | 1 |
| Rear Exhaust mounting missing |7.1.1b| | 1 |
| Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Offside Front Lower Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Centre Exhaust has a part missing |7.1.1a| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Nearside Front Lower Axle king pin is loose in the axle beam |2.5.A.3a| | 1 |
| Nearside Rear position lamp|s| incomplete |1.1.4a| | 1 |
| Nearside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Offside Side repeater incomplete |1.5.A1b| | 1 |
| Offside Indicator tell tale inoperative |1.4.A.2a| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| An item not tested |Manual| | 1 |
| Headlamp switch faulty |1.7.1| | 1 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Rear Exhaust has a part missing |7.1.1a| | 1 |
| Offside Front Headlamp insecure |1.7.3| | 1 |
| Steering box has excessive free play detected at the steering wheel (steering box fitted) (2.3 (a) (i)) | 1 |
| Brake fluid contaminated (1.8 (a)) | 1 |
| Brake master cylinder defective but brake still operating (1.1.10 (b) (i)) | 1 |
| Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Offside Rear Shock absorber insecure |2.7.2b| | 1 |
| Offside front brake binding |3.7.B.1| | 1 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| front brake binding |3.7.B.1| | 1 |
| Offside Rear position lamp|s| insecure |1.1.A.3a| | 1 |
| Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Rear Position lamp not working |4.2.1 |a| |ii|| | 1 |
| Brake master cylinder fluid level below minimum level |3.6.G.1e| | 1 |
| Offside Rear fog lamp does not face the rear |1.3.2a| | 1 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Emissions not tested |7.0| | 1 |
| Nearside Indicator tell tale inoperative |1.4.A.2a| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
| Offside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Main beam tell-tale not working (4.9.1 (a) (ii)) | 1 |