| Most common failures | No# failures |
|---|
| Registration plate lamp issues | 7 |
| Windscreen wiper does not clear the windscreen effectively | 4 |
| Rear brake application uneven | 3 |
| Brake pipe excessively corroded | 3 |
| Brakes imbalanced across an axle | 2 |
| Service brake: efficiency below requirements |3.7.B.7| | 2 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Offside Front Brake hose bulging under pressure |3.6.B.3| | 2 |
| Nearside Side repeater not working |1.4.A.2c| | 2 |
| Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
| rear brakes release unevenly |3.7.B.4| | 1 |
| Nearside Front Passengers seat insecure (6.2.6 (a) (ii)) | 1 |
| Nearside Front Side repeater with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
| Offside Front Side repeater with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
| Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear jacking point (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Near leaf spring mounting point (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Near rear leaf mounting point (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Near rear leaf mounting point (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Near front leaf mounting point (5.3.6 (a) (i)) | 1 |
| Central Front Exhaust has a major leak of exhaust gases Front flexy (6.1.2 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Step floor corroded near leaf mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Step floor corroded near leaf mount (5.3.6 (a) (i)) | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Front Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Offside Front Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Nearside Side repeater excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
| rear parking |secondary| brakes imbalanced | 1 |
| Offside Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 1 |
| Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Rear parking brake recording little or no effort | 1 |
| Offside Front Front position lamp|s| not in good working order |not working| |1.1.4a| | 1 |
| Hazard warning switch faulty |1.5.4a| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.1.B.7| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.1.B.7| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded which significantly reduces the original strength |2.4.A.2| | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Transmission brake efficiency below requirements |3.8.A.9/10| | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded which significantly reduces the original strength |3.6.D.3| | 1 |
| Brake hose excessively deteriorated | 1 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
| Exhaust mounting missing |6.3.1b| | 1 |
| Nearside Rear rear brake recording little or no effort |3.8.A.4a| | 1 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Indicator tell tale inoperative |1.4.A.2a| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Front Exhaust mounting missing |7.1.1b| | 1 |
| Horn not working |1.6.2a| | 1 |
| Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Headlamp aim out of alignment | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 1 |
| Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
| Rear fog lamp not working |1.3.2b| | 1 |
| Mechanical brake component has restricted free movement | 1 |
| Nearside Front An item not tested |Manual| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Front Brake master cylinder/servo mounting prescribed area is excessively corroded bulkhead |3.6.C.3| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Offside Rear fog lamp not working |1.3.2b| | 1 |
| Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Brake hose damaged | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |