>

MOT History from tests of petrol MBK NITROs year 2003

Review the list of common MBK NITRO failures below or to perform a specific mot history check on your MBK then use our popular KnowYourCar service

mot history
Pass percent:56.85%
(The average a petrol MBK NITRO year 2003 passes without issue)
Based on:1,015 MOT Tests
Most common failuresNo# failures
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|69
Headlamp aim out of alignment59
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|58
Stop lamp does not illuminate immediately a brake applies |1.3.1a|57
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||54
Steering headbearing has excessive free play |2.2.2|32
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|30
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||30
Exhaust is leaking and excessively noisey |7.1.1b|24
Registration plate issues22
Horn not working |1.7.3a|20
Nearside Front shock absorber seal failed and leaking oil |2.3.3|19
Rear shock absorber has inadequate damping effect. |2.4.A.3b|18
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||18
Headlamp insecure |1.2.3b|16
Horn not loud enough to be heard by another road user |1.7.3a|14
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|13
Offside Front shock absorber seal failed and leaking oil |2.3.3|12
Stop lamp remains on when the brake is released |1.3.1e|11
Rear Stop lamp remains on when the brake is released |1.3.1e|11
Rear Brake lever has inadequate reserve travel |3.1.3b|11
Riders seat insecure |6.2.1a|10
Headlamp aim not tested |1.6|10
Front position lamp does not illuminate immediately when switched on |1.1.3a|9
Steering movement excessively `notchy` with the wheel raised |2.2.1b|9
Direction indicators not working |1.5.1c|8
Front Stop lamp remains on when the brake is released |1.3.1e|8
Front Front shock absorber seal failed and leaking oil |2.3.3|8
Stop lamp affected by the operation of another lamp |1.3.2|7
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||7
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|7
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|7
Headlamp aim headlamp deteriorated and function impaired |1.2.3a|7
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|7
Front shock absorber seal failed and leaking oil |2.3.3|6
Exhaust mounting does not fully support the exhaust system |7.1.1.c|6
Rear reflector on motorcycle missing |1.4.1|6
Front wheel bearings have excessive free play |2.3.5b|6
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|6
Front Steering headbearing has excessive free play |2.2.2|5
Wheel alignment incorrect which adversely affects the steering |2.5.1|5
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|5
Direction indicators affected by the operation of another lamp |1.5.1c|5
Front Direction indicator incorrect colour |1.5.1b|5
Front Fairings insecure and likely to impede the steering |2.1.2e|4
Offside Rear Direction indicator not working |1.5.1c|4
Nearside Front Direction indicator damaged and function impaired |1.5.3a|4
Offside Front Direction indicator not working |1.5.1c|4
Rear Brake disc|s| excessively worn |3.2.A1l|4
Exhaust mounting missing |7.1.1c|4
Front Brake disc|s| excessively worn |3.2.A1l|4
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|4
Rear Brake disc|s| excessively scored |3.2.A1l|4
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|4
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|4
Headlamp aim beam image kick up to the offside |1.6|4
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b|4
Direction indicator affected by the operation of another lamp |1.5.1c|3
Headlamp dipped beam affected by the operation of another lamp |1.2.2c|3
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|3
Front wheel bearings are excessively rough |2.3.5b|3
Front Brake disc|s| is excessively distorted |3.2.A1m|3
Front Exhaust is leaking and excessively noisey |7.1.1b|3
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|3
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Front suspension has inadequate damping effect. |2.3.6c|3
Fairing insecure and likely to impede the steering |2.1.2e|3
Horn is not continous or uniform |1.7.3c|3
Nearside Brake lever has inadequate reserve travel |3.1.3b|3
Steering movement excessively stiff with the wheel raised |2.2.1b|3
Front Brake disc|s| has excessive run out |3.2.A1m|3
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|3
Nearside Rear Direction indicator insecure |1.5.3b|3
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|3
Front Upper Fairings insecure and likely to impede the steering |2.1.2e|3
Nearside Front Direction indicators not working |1.5.1c|3
Rear wheel bearings have excessive free play |2.4.A.2c|3
Rear Exhaust is leaking and excessively noisey |7.1.1b|3
Fuel cap does not fasten securely by a positive means |7.2.2b|3
Headlamp aim headlamp damaged and function impaired |1.2.3a|3
Throttle operating incorrectly |6.2.1f|3
Rear position lamp damaged and function impaired |1.1.1b|3
Stop lamp not working (4.3.1 (a) (ii))3
Rear position lamp adversely affected by the operation of another lamp |1.1.3b|2
Rear All position lamps do not illuminate immediately when switched on |1.1.3a|2
Fairings insecure and likely to impede the steering |2.1.2e|2
Nearside Rear Direction indicator damaged and function impaired |1.5.3a|2
Nearside Direction indicator not working |1.5.1c|2
Fuel system component leaking |7.2.1a|2
Direction indicator not working |1.5.1c|2
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Front Front wheel bearings have excessive free play |2.3.5b|2
Steering control handlebar movement restricted by trapped cables |2.1.2c|2
Front Direction indicators affected by the operation of another lamp |1.5.1c|2
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Front mudguard insecure |2.3.7|2
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Offside Front Direction indicator damaged and function impaired |1.5.3a|2
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Rear Brake master cylinder fluid level dangerously low |3.2.B1d|2
Rear Brake lever insecure |3.1.2a|2
Front position lamp insecure |1.1.1c|2
Direction indicators flashing more than 120 times per minute |1.5.1c|2
Offside Rear Direction indicators not working |1.5.1c|2
Offside Front Direction indicator incorrect colour |1.5.1b|2
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|2
An item not tested |Manual|2
Front All position lamps do not illuminate immediately when switched on |1.1.3a|2
Front Handlebar deformed |2.1.1b|2
Rear Direction indicator incorrect colour |1.5.1b|2
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e|2
Rear shock absorber seal failed and leaking oil |2.4.A.1c|2
Front Direction indicator not working |1.5.1c|2
Front Stop lamp deteriorated and function impaired |1.3.3a|2
Headlamp incorrect colour |1.2.1|2
Direction indicator flashing less than 60 times a minute |1.5.1c|2
Indicator tell tale not functioning |1.5.2|2
Nearside Front Direction indicator insecure |1.5.3b|2
Stop lamp does not emit a steady light |1.3.1b|2
Stop lamp not working |4.3.1 |a| |ii||2
Rear Position lamp not working (4.2.1 (a))2
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|2
Front Front mudguard insecure |2.3.7|2
Front Brake disc|s| excessively scored |3.2.A1l|2
Rear Floor brake test indicates a binding brake |3.3.C2c|2
Front Front suspension has inadequate damping effect. |2.3.6c|2
Stop lamp remains on when the brakes are released2
Nearside Rear Direction indicator incorrect colour |1.5.1b|2
Rear Brake locking device missing |3.2.A1e|2
Rear Rear wheel bearings have excessive free play |2.4.A.2c|2
Rear suspension bush has excessive free play |2.4.A2a|i||2
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|2
Stop lamp emits other than a steady red light |1.3.1b|2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy