>
main menu
Use Web App here >

MOT History from tests of petrol MAZDA MX-5s year 2003

Review the list of common MAZDA MX-5 failures below or to perform a specific mot history check on your MAZDA then use our popular KnowYourCar service

mot history
Pass percent:64.84%
(The average a petrol MAZDA MX-5 year 2003 passes without issue)
Based on:583 MOT Tests
Most common failuresNo# failures
Windscreen wiper does not clear the windscreen effectively6527
Headlamp aim out of alignment5057
Registration plate lamp issues3481
Brake pipe excessively corroded2730
Brakes imbalanced across an axle2074
Nearside Front position lamp|s| not working |1.1.A.3b|1560
Anti-lock braking system warning lamp indicates an ABS fault1356
Offside Front position lamp|s| not working |1.1.A.3b|1343
Registration plate issues1186
Parking brake: efficiency below requirements |3.7.B.7|1147
Rear parking brake recording little or no effort1031
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))838
Rear brake binding814
Offside Rear coil spring broken |2.4.C.1a|773
Nearside Rear coil spring broken |2.4.C.1a|762
Offside front brake binding |3.7.B.1|709
Parking brake efficiency below requirements (1.4.2 (a) (i))689
Nearside Front Position lamp not working (4.2.1 (a) (ii))676
Rear brake disc in such a condition that it is seriously weakened652
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3|649
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6|613
Offside Front Position lamp not working (4.2.1 (a) (ii))576
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6|537
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))520
Offside Stop lamp not working |1.2.1b|500
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))485
Front brake disc in such a condition that it is seriously weakened481
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))480
Parking brake lever has no reserve travel |3.1.6b|479
Front brake application uneven460
Nearside front brake binding |3.7.B.1|455
Nearside Front Front position lamp|s| not working |1.1.A.3b|440
Offside Front front brake binding |3.7.B.1|423
Nearside Front Service brake excessively binding (1.2.1 (f))407
Nearside Stop lamp not working |1.2.1b|401
Offside Front Front position lamp|s| not working |1.1.A.3b|389
Nearside Front coil spring broken |2.4.C.1a|388
Offside Headlamp not working on dipped beam |1.7.5a|386
Offside Front Service brake excessively binding (1.2.1 (f))385
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6|366
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))354
Offside Front brake disc excessively pitted |3.5.1h|343
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a))327
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6|313
Offside Rear coil spring fractured |2.4.C.1a|312
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|307
Nearside Headlamp not working on dipped beam |1.7.5a|306
Mechanical brake component has restricted free movement305
Nearside Front brake disc excessively pitted |3.5.1h|302
Nearside Rear coil spring fractured |2.4.C.1a|301
Nearside Front front brake binding |3.7.B.1|253
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))249
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|247
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))245
Windscreen washer not working 220
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|217
Offside Front coil spring broken |2.4.C.1a|210
Nearside Front Position lamp not working |4.2.1 |a||198
Offside Front Position lamp not working |4.2.1 |a||197
Exhaust Lambda reading after 2nd fast idle outside specified limits |8.2.1.2 |c||195
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|194
Parking brake efficiency below requirements |1.4.2 |a| |i||194
Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3|189
Offside Rear Coil spring fractured or broken |5.3.1 |b| |i||175
Nearside Rear Coil spring fractured or broken |5.3.1 |b| |i||173
Front brake disc excessively pitted |3.5.1h|173
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii))172
Windscreen has damage168
Nearside Rear Service brake excessively binding (1.2.1 (f))166
Offside Rear Stop lamp not working |1.2.1b|163
Rear Exhaust has a major leak of exhaust gases |7.1.2|162
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))157
Offside Front Anti-roll bar linkage insecure |2.4.G.1|157
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))155
Offside Rear brake caliper leaking |3.6.A.1|155
Service brake: efficiency below requirements |3.7.B.7|155
Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|154
Nearside Rear brake caliper leaking |3.6.A.1|154
Brake hose excessively deteriorated154
Nearside Rear Stop lamp not working |1.2.1b|154
Nearside Rear brake disc excessively pitted |3.5.1h|152
Engine MIL inoperative or indicates a malfunction |8.2.1.2 |h||151
Offside Rear Parking brake inoperative on one side (1.4.1 (a))150
Offside Rear brake disc excessively pitted |3.5.1h|150
Offside Rear Service brake excessively binding (1.2.1 (f))147
Front brake excessively fluctuating146
Nearside Parking brake inoperative on one side (1.4.1 (a))145
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))141
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|140
Rear brake application uneven140
Exhaust has a major leak of exhaust gases |7.1.2|139
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e|138
Exhaust has a major leak of exhaust gases (6.1.2 (a))137
Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|136
Rear Mechanical brake component has restricted free movement134
Offside Parking brake inoperative on one side (1.4.1 (a))133
Offside Front Headlamp not working on dipped beam |1.7.5a|131
Nearside Rear coil spring incomplete |2.4.C.1a|130
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|130
Nearside Front Coil spring fractured or broken |5.3.1 |b| |i||127
Nearside Front Headlamp not working on dipped beam |1.7.5a|127
Offside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|126
Windscreen wiper blade insecure123
Offside Stop lamp(s) not working (4.3.1 (a) (ii))123
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))122
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))122
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))121
Offside Front Service brake excessively binding |1.2.1 |f||120
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|119
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|117
Offside Front Anti-roll bar linkage fractured |2.4.G.1|114
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))113
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))113
Nearside Front Anti-roll bar linkage insecure |2.4.G.1|112
Emissions not tested (8.2.1.2 (d))111
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))111
Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))111
Offside Rear coil spring incomplete |2.4.C.1a|107
Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4|106
Exhaust carbon monoxide content at idle exceeds manufacturers specified limits (8.2.1.2 (b))106
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))101
Offside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i))101
Nearside Front Service brake excessively binding |1.2.1 |f||100
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))100
Nearside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6|100
Nearside Front coil spring fractured |2.4.C.1a|97
Brake lever has insufficient reserve travel (1.1.2 (a))97
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|97
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))97
Battery insecure |1.9.1|97
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6|96
Offside Rear Braking system leaking |3.6.A.1|94
Supplementary Restraint System warning lamp indicates a fault |5.4.2|94
Rear fog lamp not working (4.5.1 (a) (ii))93
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))88
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))87
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3|86
Offside Front Coil spring fractured or broken |5.3.1 |b| |i||85
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))85
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6|84
Nearside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i))83
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))83
Nearside Front Anti-roll bar linkage fractured |2.4.G.1|83
Centre Stop lamp not working |1.2.1b|82
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))81
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))81
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))80
Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))79
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|78
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))78
Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6|78
Offside Windscreen wiper blade deteriorated |8.2.2|78
Horn not working (7.7 (a))78
Service brake efficiency below requirements (1.2.2 (a) (i))77
Nearside Windscreen wiper blade deteriorated |8.2.2|77
Offside Rear Lower Suspension arm corroded and seriously weakened |2.4.G.1|76
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|73
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))73
Rear brake disc excessively pitted |3.5.1h|72
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3|72
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))71
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|70
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b|70
Front position lamp|s| not working |1.1.A.3b|70
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))69
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))68
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))68
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))68
Offside Front Windscreen wiper blade deteriorated |8.2.2|67
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))66
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|66
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a))66
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))65
Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6|65
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))64
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b|64
Nearside Front Windscreen wiper blade deteriorated |8.2.2|64
Offside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2|63
Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3|62
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6|61
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))61
Offside Rear Suspension arm corroded and seriously weakened |2.4.G.1|61
Horn not working |1.6.2a|60
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))60
Brake fluid warning lamp illuminated |3.6.G.2|60
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))59
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))59
Power steering pipe|s| or hose|s| leaking |2.3.3b|59
Offside Rear Service brake excessively binding |1.2.1 |f||58
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))57
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))57
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|55
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))55
Nearside Rear Anti-roll bar linkage insecure |2.4.G.1|54
Offside Front Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3|54
Nearside Side repeater not working |1.4.A.2c|54
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))54
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))54
Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii||53
Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a))53
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3|53
Offside Rear Wheel nut|s| missing |4.2.A.1e|53
Nearside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2|52
Power steering pipe/hose leaking (2.1.5 (a))52
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||52
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|52
Nearside Rear Braking system leaking |3.6.A.1|52
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))51
Nearside Parking brake inoperative on one side |1.4.1 |a||51
Offside Stop lamp|s| not working |4.3.1 |a| |ii||51
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|51
Centre Exhaust has a major leak of exhaust gases |7.1.2|51
Offside Rear Anti-roll bar linkage insecure |2.4.G.1|51
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))50
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))50
Parking brake lever has excessive movement indicating incorrect adjustment |1.1.6 |c||50
Offside Rear Shock absorbers has a serious fluid leak50
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))50
Emissions unable to be completed (8.2.1.2 (d))49
Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))49
Seat belt anchorage prescribed area is excessively corroded |5.2.6|49
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3|49
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|49
Nearside Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|49
Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))48
Nearside Rear Shock absorbers has a serious fluid leak48
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))48
Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b|48
Rear Exhaust has a major leak of exhaust gases |6.1.2 |a||48
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|48
Offside Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|48
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))47
Nearside Rear Lower Suspension arm corroded and seriously weakened |2.4.G.1|47
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3|47
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|47
Brake performance not tested |3.7.A.1|47
Brake hose damaged46
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))46
Nearside Track rod end ball joint has excessive play |2.2.B.1f|46
Nearside Rear Service brake excessively binding |1.2.1 |f||46
Offside Rear Shock absorber has a serious fluid leak |2.7.3|46
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))45
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))45
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))45
Offside Headlamp not working on dipped beam |4.1.1 |a| |ii||45
Nearside Rear Anti-roll bar linkage fractured |2.4.G.1|45
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))45
Nearside Rear Shock absorber has a serious fluid leak |2.7.3|45
Offside Rear fog lamp not working |1.3.2b|45
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|44
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))44
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||44
Offside rear brake recording little or no effort |3.7.B.5a|44
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|44
Offside rear brake excessively fluctuating |3.7.B.3|44
Nearside Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|44
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))43
Nearside Rear Parking brake inoperative on one side |1.4.1 |a||43
Offside Rear position lamp|s| not working |1.1.A.3b|43
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))43
Offside Front wheel bearing rough when rotated |2.5.A.2|43
Offside Rear Anti-roll bar linkage fractured |2.4.G.1|42
rear parking |secondary| brakes imbalanced42
Offside Rear Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|42
Nearside Stop lamp|s| not working |4.3.1 |a| |ii||42
Rear fog lamp not working |1.3.2b|42
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|41
Offside Rear Parking brake inoperative on one side |1.4.1 |a||41
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))41
Nearside rear brake excessively fluctuating |3.7.B.3|41
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f|41
Offside Front Wheel nut|s| missing |4.2.A.1e|41
Offside Rear Anti-roll bar has excessive play in a ball joint |2.4.G.2|41
Offside Parking brake inoperative on one side |1.4.1 |a||40
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))40
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|40
Offside Inner Front brake disc excessively pitted |3.5.1h|40
Exhaust has a major leak of exhaust gases |6.1.2 |a||40
Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|39
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))39
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||39
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|39
Offside Rear Hydraulic brake calliper leaking |1.1.16 |b| |i||39
Nearside rear brake recording little or no effort |3.7.B.5a|39
Nearside Rear coil spring cracked |2.4.C.1a|39
Nearside Rear Anti-roll bar has excessive play in a ball joint |2.4.G.2|38
Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))38
Brake performance not tested (1.2.1 (g))38
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))38
Nearside Rear Suspension arm corroded and seriously weakened |2.4.G.1|37
Nearside Rear Hydraulic brake calliper leaking |1.1.16 |b| |i||37
Offside Front brake caliper has restricted free movement |3.5.1k|37
Battery insecure and likely to cause a short circuit (4.13 (a) (ii))37
Central Exhaust has a major leak of exhaust gases (6.1.2 (a))37
Nearside Inner Front brake disc excessively pitted |3.5.1h|37
Offside Rear Position lamp not working (4.2.1 (a) (ii))36
brake disc excessively pitted |3.5.1h|36
Offside Side repeater not working |1.4.A.2c|36
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|36
Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b|36
Headlamp aim out of alignment35
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||35
Emissions not tested |7.3.A.1|35
Nearside Headlamp not working on main beam |1.7.5a|35
Horn not working (7.7 (a) (ii))35
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))35
Nearside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|35
Nearside Rear position lamp|s| not working |1.1.A.3b|35
Nearside Front Brake hose twisted |found during steering lock to lock check| |2.2.D.2b|35
Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))34
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|34
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))34
Offside Front brake disc excessively scored |3.5.1h|34
Offside Front Shock absorbers has a serious fluid leak34
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|34
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i||34
Offside front brake juddering severely |3.7.A.2b|34
Nearside Front coil spring incomplete |2.4.C.1a|33
Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b|33
Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii||33
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i||33
Offside Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|33
Offside Rear Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))33
front brakes release unevenly |3.7.B.4|33
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|33
Emissions not tested |8.2.1.2 |d||32
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i||32
Nearside Front brake disc excessively scored |3.5.1h|32
Power steering pipe/hose leaking |2.1.5 |a||32
Nearside Front Shock absorbers has a serious fluid leak32
Nearside Rear Position lamp not working (4.2.1 (a) (ii))32
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3|31
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2|31
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3|31
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))31
Offside Rear coil spring cracked |2.4.C.1a|31
Central Stop lamp(s) not working (4.3.1 (a) (ii))31
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits |8.2.1.2 |b||30
Supplementary restraint system warning lamp indicates a fault |7.1.6 |a||30
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6|30
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6|30
Drivers airbag missing (7.1.5 (a))30
Offside Rear Stop lamp|s| not working |4.3.1 |a| |ii||30
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3|29
Offside Front Valve stem seriously damaged |4.1.D.1e|29
Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))29
Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))29
Nearside Side repeater not working (4.4.1 (a) (ii))29
Nearside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i||29
Offside Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|29
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|29
Offside Rear Service brake excessively fluctuating (1.2.1 (e))29
Emissions not tested |7.0|29
Offside Front coil spring fractured |2.4.C.1a|29
Nearside Rear Wheel nut|s| missing |4.2.A.1e|29
Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b|28
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i||28
Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3|28
Offside Headlamp not working on main beam |1.7.5a|28
Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))27
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))27
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i||27
Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))27
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i||27
Brake fluid significantly below minimum mark (1.1.10 (d) (ii))27
Nearside Rear Service brake excessively fluctuating (1.2.1 (e))27
Offside Rear Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|26
Offside Headlamp light intensity severely reduced (4.1.4 (a))26
Brake lever has insufficient reserve travel |1.1.2 |a||26
Offside Front Service brake excessively fluctuating (1.2.1 (e))26
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3|26
Offside Steering rack gaiter split |2.2.D.2d|26
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))26
Windscreen wiper does not clear the windscreen effectively25
Nearside Front Valve stem seriously damaged |4.1.D.1e|25
Nearside Headlamp light intensity severely reduced (4.1.4 (a))25
Offside Headlamp lens seriously defective (4.1.1 (b) (ii))25
Offside Front front brake juddering severely |3.7.A.2b|25
Power steering component leaking (2.1.5 (a))25
Power steering inoperative (2.1.5 (c) (i))25
Nearside Rear Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))25
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))25
Nearside Rear Braking system leaking caliper |3.6.A.1|25
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))25
Offside Rear Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i||25
Nearside Front wheel bearing rough when rotated |2.5.A.2|25
Offside Rear rear brake recording little or no effort |3.7.B.5a|25
Offside Rear Lower Suspension arm corroded and seriously weakened |5.3.3 |b| |i||25
Nearside front brake juddering severely |3.7.A.2b|25
Offside Front Brake hose twisted |found during steering lock to lock check| |2.2.D.2b|24
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))24
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))24
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))24
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))24
Nearside Front Position lamp not working |4.2.1 |a| |ii||24
Nearside Rear rear brake excessively fluctuating |3.7.B.3|24
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))24
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3|24
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a|24
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|24
Rear fog lamp tell tale not working |1.3.1b|24
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|23
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i||23
Offside Front Front wheel bearing rough when rotated |2.5.A.2|23
Suspension component mounting prescribed area is excessively corroded |2.4.A.3|23
Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))23
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i||23
Nearside Rear Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i||23
Offside Rear rear brake excessively fluctuating |3.7.B.3|23
Nearside Front All position lamps not working |1.1.A.3b|23
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|23
Offside Rear Upper Suspension arm corroded and seriously weakened (5.3.3 (b) (i))23
Brake hose has insufficient room to move23
Nearside Front Wheel nut|s| missing |4.2.A.1e|23
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|23
Power steering component|s| leaking |2.3.3b|23
Rear Exhaust system not adequately supported |7.1.1|23
Offside Rear fog lamp not working (4.5.1 (a) (ii))23
Nearside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))23
Offside Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d|23
Nearside Steering rack gaiter split |2.2.D.2d|23
Offside Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|23
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i||23
Nearside Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|23
Offside Front All position lamps not working |1.1.A.3b|23
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))23
Parking brake efficiency below requirements (1.4.2 (a) (i))22
Horn not working |7.7 |a| |ii||22
Brake performance not tested |1.2.1 |g||22
Offside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|22
Brake performance unable to be tested (1.2.1 (g))22
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2|22
Brake pedal spongy |3.3.B.1b|22
Nearside Rear rear brake recording little or no effort |3.7.B.5a|22
Offside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i||22
Nearside Headlamp aim not tested |1.8.A.1c|22
Stop lamp not working |1.2.1b|22
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i||22
Nearside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3|22
Offside Rear Upper Suspension arm corroded and seriously weakened |2.4.G.1|22
Nearside Front Front wheel bearing rough when rotated |2.5.A.2|22
Rear fog lamp missing (4.5.1 (a) (ii))22
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|22
Offside Rear Braking system leaking caliper |3.6.A.1|22
Offside Rear Valve stem seriously damaged |4.1.D.1e|21
Nearside Front brake caliper has restricted free movement |3.5.1k|21
Offside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii))21
Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii))21
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|21
Braking system leaking |3.6.A.1|21
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii))21
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|21
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|21
Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))21
Nearside Front Shock absorber has a serious fluid leak |2.7.3|21
Offside Front Track rod end ball joint has excessive play |2.2.B.1f|21
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))21
Offside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2|21
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))20
Front Windscreen wiper blade deteriorated |8.2.2|20
Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))20
Nearside rear brake juddering severely |3.7.A.5b|20
Nearside Front Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3|20
Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii))20
Offside Front An item not tested |Manual|20
Nearside Front position lamp|s| incorrect colour |1.1.A.3e|20
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))20
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i||20
Nearside Front Service brake excessively fluctuating (1.2.1 (e))20
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3|20
Nearside Rear Valve stem seriously damaged |4.1.D.1e|20
Brake pipe leaking |3.6.A.1|20
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))20
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i))20
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii))20
Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3|20
Nearside Rear Road wheel bead rim badly distorted |4.2.A.1a|20
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i||20
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i||20
Nearside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii))20
Battery insecure and likely to fall from carrier (4.13 (a) (ii))20
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3|20
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))20
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer`s specified limits |8.2.1.2 |a||20
Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))20
Offside Rear brake disc excessively scored |3.5.1h|20
Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))20
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))19
Nearside Rear Stop lamp|s| not working |4.3.1 |a| |ii||19
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||19
Nearside Front Direction indicator not working |1.4.A.2c|19
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i||19
Offside Front Shock absorber has a serious fluid leak |2.7.3|19
Power steering pipe|s| or hose|s| excessively corroded |2.3.2|19
Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|19
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i))19
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))19
Rear Parking brake lever has no reserve travel |3.1.6b|19
Nearside Rear Upper Suspension arm corroded and seriously weakened |2.4.G.1|19
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i||19
Offside Side repeater not working (4.4.1 (a) (ii))19
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|19
Offside rear brake juddering severely |3.7.A.5b|19
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))18
Offside Front Service brake lagging in operation (1.2.1 (d))18
Nearside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii))18
Offside Front Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3|18
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))18
Offside Front position lamp|s| incorrect colour |1.1.A.3e|18
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i||18
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i))18
Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))18
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))18
Nearside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))18
Offside Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i||18
brake disc in such a condition that it is seriously weakened |3.5.1i|18
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3|18
Offside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))18
Nearside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|18
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))18
Nearside Headlamp light source and lamp not compatible (4.1.4 (c))18
Offside Headlamp light source and lamp not compatible (4.1.4 (c))18
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))18
Nearside Front Side repeater not working (4.4.1 (a) (ii))18
Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail |2.4.A.3|17
Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))17
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|17
Nearside Front Brake hose twisted |3.6.B.4c|17
Front brake disc excessively scored |3.5.1h|17
Anti-lock braking system warning lamp does not illuminate (1.6 (a))17
Central Exhaust has a major leak of exhaust gases |7.1.2|17
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i||17
Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))17
Oil leaking excessively from engine (8.4.1 (a) (i))17
Nearside Rear front brake binding |3.7.B.1|17
Nearside Front Valve stem seriously damaged (5.2.3 (j))17
Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a|17
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|17
Central Stop lamp not working |1.2.1b|17
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||17
Nearside Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d|17
Front Service brake excessively fluctuating (1.2.1 (e))17
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i||17
Offside Headlamp not working on main beam (4.1.1 (a) (ii))17
Nearside Front Direction indicator not working (4.4.1 (a) (ii))17
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i))17
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))17
Nearside Position lamp not working (4.2.1 (a) (ii))17
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))17
Offside Front Service brake excessively fluctuating |1.2.1 |e||17
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2|17
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis rail |2.4.A.3|16
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i||16
Nearside Front front brake juddering severely |3.7.A.2b|16
Offside Front Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii))16
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii||16
Offside Rear front brake binding |3.7.B.1|16
Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))16
Centre Rear Stop lamp not working |1.2.1b|16
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))16
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))16
Nearside Rear wheel bearing has excessive play |2.6.2|16
Offside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|16
Front Front position lamp|s| not working |1.1.A.3b|16
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))16
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2|16
Offside Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b|16
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))16
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|16
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))16
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))16
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i||15
Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))15
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))15
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i||15
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i||15
Offside Front Road wheel fixing missing (5.2.1 (a) (i))15
Parking brake: efficiency below requirements |3.7.C.1b|15
Nearside Front Lower Shock absorber has an excessively worn bush |2.7.4|15
Nearside Front Side repeater not working |1.4.A.2c|15
Rear fog lamp tell-tale not working (4.9.1 (a) (ii))15
Offside Front Braking system leaking |3.6.A.1|15
Offside Rear Brake pipe leaking |3.6.A.1|15
Offside Rear Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6|15
Nearside Front Service brake lagging in operation (1.2.1 (d))15
Offside Track rod end ball joint has excessive play |2.2.B.1f|15
Offside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))15
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))15
Windscreen wiper blade deteriorated |8.2.2|15
Offside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3|15
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))15
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i||15
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i||15
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i||15
Offside Front Headlamp not working on main beam |1.7.5a|15
Nearside Front Direction indicator incorrect colour (4.4.3 (a))15
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))15
Rear fog lamp switch inoperative (4.5.3 (a))15
Brakes imbalanced across an axle14
Nearside Front coil spring cracked |2.4.C.1a|14
Offside Position lamp not working (4.2.1 (a) (ii))14
Nearside Rear Valve stem seriously damaged (5.2.3 (j))14
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i||14
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))14
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i))14
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))14
Exhaust emissions likely to be affected by an exhaust leak |8.2.1.1 |b||14
Anti-lock braking system warning lamp does not illuminate |3.4.1b|14
Offside Front Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3|14
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))14
Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))14
Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|14
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))14
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))14
Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|14
Nearside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))14
Offside Rear Service brake excessively fluctuating |1.2.1 |e||14
Centre Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e|14
Nearside Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3|14
Offside Front Position lamp not working |4.2.1 |a| |ii||14
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))14
Exhaust catalytic converter missing where one was fitted as standard |7.1.3|14
Nearside Front Headlamp not working on dipped beam |4.1.1 |a| |ii||14
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i||14
Nearside Front An item not tested |Manual|14
Offside Rear wheel bearing has excessive play |2.6.2|14
Stop lamp(s) all not working (4.3.1 (a) (iii))14
Offside Front brake caliper leaking |3.6.A.1|14
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))14
Offside Headlamp aim not tested |1.8.A.1c|14
Offside Front Headlamp not working on dipped beam |4.1.1 |a| |ii||14
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1|14
Nearside Rear Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|14
Offside Rear Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|14
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3|14
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2|14
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3|14
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))14
Nearside Front Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii))14
Offside Front Anti-roll bar insecure |2.4.G.1|14
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))14
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))14
Front position lamp|s| not working both |1.1.A.3b|14
Nearside Rear Lower Suspension arm corroded and seriously weakened |5.3.3 |b| |i||14
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))13
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))13
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6|13
Parking brake: efficiency below requirements |3.7.D.4|13
An item not tested |Manual|13
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))13
Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b|13
Offside Rear Valve stem seriously damaged (5.2.3 (j))13
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))13
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2|13
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i||13
Nearside Front Headlamp not working on main beam |1.7.5a|13
Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))13
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))13
Offside Rear Upper coil spring broken |2.4.C.1a|13
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))13
Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|13
Offside Rear Suspension arm corroded and seriously weakened |5.3.3 |b| |i||13
Offside Front Floor excessively deteriorated (6.2.4 (a) (i))13
Front Position lamp not working both (4.2.1 (a) (ii))13
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))13
Offside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|13
Offside Front Anti-roll bar linkage damaged and seriously weakened |2.4.G.1|13
Nearside Front brake caliper leaking |3.6.A.1|13
Offside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c||13
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i))13
Hazard warning switch faulty |1.4.B.1d|13
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))13
Offside Front Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3|13
Offside Rear Rear position lamp|s| not working |1.1.A.3b|13
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))13
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))13
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))13
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i||13
Nearside Front Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3|13
Brake pedal has insufficient reserve travel (1.1.2 (a))13
Offside Rear brake caliper has restricted free movement |3.5.1k|13
Front front brake binding |3.7.B.1|13
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))13
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits |8.2.1.2 |b||12
Offside Front Brake hose twisted |3.6.B.4c|12
Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))12
Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))12
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))12
Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))12
Exhaust catalytic converter missing where one was fitted as standard (8.2.2.1 (a))12
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6|12
Nearside Front Anti-roll bar linkage damaged and seriously weakened |2.4.G.1|12
Nearside Front Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii))12
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))12
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii))12
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))12
Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))12
Rear Brake disc significantly and obviously worn |1.1.14 |a| |i||12
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))12
Nearside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))12
Rear Service brake excessively fluctuating (1.2.1 (e))12
Offside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))12
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6|12
Nearside Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e|12
Rear Exhaust system insecure (6.1.2 (a))12
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i||12
Nearside Side repeater incorrect colour |1.4.A.2f|12
Nearside Front Track rod end ball joint has excessive play |2.1.3 |b| |i||12
Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))12
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2|12
Service brake efficiency below requirements |1.2.2 |a| |i||12
Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))12
Offside Front Brake hose leaking |3.6.A.1|12
Offside Rear Upper Suspension arm corroded and seriously weakened |5.3.3 |b| |i||12
Offside Front Direction indicator incorrect colour (4.4.3 (a))12
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i))12
Offside Front Direction indicator not working (4.4.1 (a) (ii))12
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii))12
Exhaust emissions - engine idle speed too high (8.2.1.2 (e))12
Offside Front Headlamp light intensity severely reduced (4.1.4 (a))12
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))12
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i||12
Nearside Rear brake disc excessively scored |3.5.1h|12
Offside Front Lower Shock absorbers has an excessively worn bush (5.3.2 (c))12
Nearside Front Front position lamp|s| incorrect colour |1.1.A.3e|12
Offside Front Front position lamp|s| incorrect colour |1.1.A.3e|12
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))12
Offside Front Steering rack gaiter split |2.2.D.2d|12
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3|12
Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))12
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i))12
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a))11
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))11
Brake pipe excessively corroded11
Rear fog lamp not working (4.5.1 (a) (ii))11
Nearside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c||11
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i||11
Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))11
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))11
Offside Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|11
Nearside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|11
Power steering fluid level below minimum |2.3.1|11
Nearside Front Shock absorber has an excessively worn bush |2.7.4|11
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))11
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))11
Nearside Front Anti-roll bar insecure |2.4.G.1|11
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii||11
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))11
Nearside Front Subframe mounting prescribed area is excessively corroded chassis leg |2.4.A.3|11
Offside Front Valve stem seriously damaged (5.2.3 (j))11
Offside Front Anti-roll bar linkage missing |2.4.G.1|11
Offside Rear Braking system leaking brake caliper |3.6.A.1|11
Nearside Rear Upper Suspension arm corroded and seriously weakened (5.3.3 (b) (i))11
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))11
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))11
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))11
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a))11
Offside Front wheel bearing has excessive play |2.5.A.3c|11
Rear Rear fog lamp not working |1.3.2b|11
Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|11
Nearside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|11
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))11
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))11
Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|11
Offside Front Anti-roll bar linkage fractured |5.3.3 |b| |ii||11
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i))11
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))11
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))11
Offside Front Anti-roll bar linkage insecurely attached |5.3.3 |a| |i||11
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))11
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))11
Offside Rear Road wheel fixing missing (5.2.1 (a) (i))11
Power steering inoperative |2.3.3a|11
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i||11
Direction indicators not working |1.4.A.2c|11
Nearside Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b|11
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6|11
Nearside Front Steering rack gaiter split |2.2.D.2d|11
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))11
Offside Front Anti-roll bar linkage insecure and impairing directional stability |5.3.3 |a| |ii||11
Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))11
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))11
Offside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))11
Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))11
Offside Front Lower Shock absorber has an excessively worn bush |2.7.4|11
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|10
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))10
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch |7.1.1 |a| |i||10
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|10
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))10
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))10
Nearside Rear Direction indicator not working |1.4.A.2c|10
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i||10
Offside Rear Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii))10
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))10
Offside Rear Position lamp not working |4.2.1 |a||10
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))10
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))10
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|10
Offside Front Headlamp aim projected beam image is obviously incorrect |4.1.2 |c||10
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))10
Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a|10
Rear fog lamp does not emit a steady red light (4.5.4 (a))10
Front front brake juddering severely |3.7.A.2b|10
Offside Headlamp aim not tested (4.1.2 (b))10
Nearside Front wheel bearing has excessive play |2.5.A.3c|10
front brake juddering severely |3.7.A.2b|10
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|10
Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|10
Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2|10
Power steering fluid reservoir empty (2.1.5 (b) (ii))10
Offside Front Headlamp light source and lamp not compatible (4.1.4 (c))10
Nearside Front Headlamp light source and lamp not compatible (4.1.4 (c))10
Front Service brake imbalanced across an axle (1.2.1 (b) (i))10
Nearside Front Road wheel bead rim badly distorted |4.2.A.1a|10
Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6|10
Power steering malfunctioning (2.1.5 (a))10
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))10
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))10
Battery insecure and likely to cause a short circuit |4.13 |a| |ii||10
Offside Front Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii))10
Rear fog lamp not working |4.5.1 |a| |ii||10
Offside Rear Service brake lagging in operation (1.2.1 (d))10
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))10
Nearside Rear Rear position lamp|s| not working |1.1.A.3b|10
Offside Front Lower Suspension arm corroded and seriously weakened |2.4.G.1|10
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))10
Nearside Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6|10
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))10
Offside Front Direction indicator not working |1.4.A.2c|10
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4|10
Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))10
Nearside Position lamp not working |4.2.1 |a||10
Front Power steering pipe|s| or hose|s| leaking |2.3.3b|10
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a|10
Offside Rear Rear fog lamp not working |1.3.2b|10
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))10
Rear Rear fog lamp not working (4.5.1 (a) (ii))10
Offside Headlamp insecure |1.7.3|10
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|10
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))10
Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))9
Offside Front Floor excessively deteriorated |6.2.4 |a| |i||9
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))9
Central Exhaust has a major leak of exhaust gases |6.1.2 |a||9
Nearside Front Anti-roll bar linkage missing |2.4.G.1|9
Offside Rear Hydraulic brake calliper leaking and braking performance affected (1.1.16 (b) (ii))9
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))9
Nearside Rear Anti-roll bar insecure |2.4.G.1|9
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a|9
Offside Front Anti-roll bar linkage worn and seriously weakened |2.4.G.1|9
Nearside Rear Service brake lagging in operation (1.2.1 (d))9
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i||9
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))9
Rear brake disc excessively scored |3.5.1h|9
Brake fluid significantly below minimum mark |1.1.10 |d| |ii||9
Offside Front Headlamp aim not tested (4.1.2 (b))9
Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii))9
Brake hydraulic reservoir fluid level significantly below minimum level (1.1.10 (d) (ii))9
Front Body has a sharp edge caused by damage |6.1.C.1|9
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i))9
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))9
Offside Rear Anti-roll bar linkage fractured (5.3.3 (b) (ii))9
Offside Body has a sharp edge caused by damage |6.1.C.1|9
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|9
Front Exhaust has a major leak of exhaust gases |7.1.2|9
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))9
Nearside Front Anti-roll bar fractured |2.4.G.1|9
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))9
Offside Rear wheel bearing rough when rotated |2.6.1|9
Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|9
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|9
front brake binding |3.7.B.1|9
Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||9
Nearside Front Service brake excessively fluctuating |1.2.1 |e||9
Nearside Headlamp light intensity severely reduced |4.1.4 |a||9
Nearside Headlamp insecure |1.7.3|9
Nearside Front Lower Shock absorbers has an excessively worn bush (5.3.2 (c))9
Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a|9
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))9
Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a|9
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i))9
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||9
Front position lamp|s| incorrect colour |1.1.A.3e|9
Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii))9
Nearside Rear Upper Suspension arm corroded and seriously weakened |5.3.3 |b| |i||9
All direction indicators not working (4.4.1 (a) (ii))9
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i||9
Rear Exhaust has a major leak of exhaust gases joint (6.1.2 (a))9
Offside Front Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d|9
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))9
Rear Service brake excessively binding (1.2.1 (f))9
Offside Front coil spring incomplete |2.4.C.1a|9
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i||9
Nearside Rear Brake pipe leaking |3.6.A.1|9
Hazard warning switch inoperative (4.4.2 (a) (ii))9
Hazard warning lamps inoperative (4.4.1 (e))9
Front Power steering pipe/hose leaking (2.1.5 (a))9
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|9
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))9
Nearside Front Front wheel bearing has excessive play |2.5.A.3c|9
Offside Rear An item not tested |Manual|9
Nearside Track rod end ball joint has excessive play |2.1.3 |b| |i||9
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|9
Fuel tank leaking |7.2.3|9
Nearside Rear Service brake excessively fluctuating |1.2.1 |e||9
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2|9
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))9
Service brake efficiency below requirements (1.2.2 (a) (i))8
Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))8
Front Service brake excessively binding (1.2.1 (f))8
Offside Front Headlamp insecure (4.1.1 (c))8
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i))8
Offside Front position lamp|s| not in good working order |function impaired| |1.1.4a|8
Offside Front Brake hose excessively twisted (1.1.12 (b) (ii))8
Nearside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|8
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|8
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|8
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b|8
Nearside Outer Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|8
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))8
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i||8
Power steering malfunctioning |2.3.3a|8
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))8
Offside Rear Rear wheel bearing has excessive play |2.6.2|8
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))8
Central Rear Stop lamp(s) not working (4.3.1 (a) (ii))8
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))8
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))8
Nearside Rear Braking system leaking brake caliper |3.6.A.1|8
Offside Front Subframe mounting prescribed area is excessively corroded chassis leg |2.4.A.3|8
Nearside Headlamp insecure (4.1.1 (c))8
Headlamp levelling device inoperative (4.1.5 (a))8
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))8
Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))8
Nearside Rear Suspension component mounting prescribed area is excessively corroded Outer sill |2.4.A.3|8
Offside Rear Suspension component mounting prescribed area is excessively corroded Outer sill |2.4.A.3|8
Offside Rear Upper Coil spring fractured or broken |5.3.1 |b| |i||8
Offside Rear Road wheel bead rim badly distorted |4.2.A.1a|8
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))8
Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e|8
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2|8
Nearside Rear Anti-roll bar linkage missing |2.4.G.1|8
Offside Front Headlamp insecure |1.7.3|8
Nearside Front Anti-roll bar linkage insecure and impairing directional stability |5.3.3 |a| |ii||8
Nearside Front Brake hose excessively damaged |3.6.B.4d|8
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3|8
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|8
Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))8
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))8
Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))8
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))8
Nearside Front Braking system leaking |3.6.A.1|8
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))8
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))8
Exhaust system insecure (6.1.2 (a))8
Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))8
Windscreen wiper not operating automatically when switched on |8.2.1b|8
Headlamp aim not tested (4.1.2 (b))8
Rear brake excessively fluctuating8
Offside Rear rear brake juddering severely |3.7.A.5b|8
Hazard warning lamps inoperative |1.4.B.1b|8
Nearside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))8
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d|8
Nearside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6|8
Nearside Front Hydraulic brake calliper leaking (1.1.16 (b) (i))8
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))8
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a|8
Brake pedal has insufficient reserve movement |3.3.A.5|8
Nearside Front Upper coil spring broken |2.4.C.1a|8
Offside Rear Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6|8
Offside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))8
Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii))8
Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|8
Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|8
Nearside Front Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d|8
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2|8
Offside Front Side repeater not working |1.4.A.2c|8
Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))8
Offside Obligatory mirror insecure |8.1.1|8
Nearside Front Upper Coil spring fractured or broken (5.3.1 (b) (i))8
Nearside Front Anti-roll bar linkage fractured |5.3.3 |b| |ii||8
Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i))8
Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2|8
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))8
Offside Front Anti-roll bar fractured |2.4.G.1|8
Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|8
rear brake excessively fluctuating |3.7.B.3|8
Offside Front Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3|8
Nearside Rear brake caliper has restricted free movement |3.5.1k|8
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))8
Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3|8
Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))8
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||8
Offside Front Anti-roll bar attachment bracket/mounting insecure |2.4.G.1|8
Rear fog lamp switch missing (4.5.3 (a))8
Offside Position lamp not working |4.2.1 |a||8
Offside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6|8
Offside Inner Rear brake disc excessively pitted |3.5.1h|8
Brake fluid contaminated (1.8 (a))8
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i||8
Offside Rear position lamp|s| incorrect colour |1.1.A.3e|8
Offside Front Front wheel bearing has excessive play |2.5.A.3c|8
Offside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))7
Offside Rear Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6|7
Nearside Side repeater missing |1.4.A.2b|7
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i||7
Nearside Inner Rear brake disc excessively pitted |3.5.1h|7
Nearside Front Power steering pipe|s| or hose|s| leaking |2.3.3b|7
Offside Front Position lamp not working (4.2.1 (a) (ii))7
Horn not working (7.7 (a))7
Offside Front Service brake excessively binding (1.2.1 (f))7
Offside Front Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b|7
Exhaust system not adequately supported |7.1.1|7
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|7
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|7
Offside Rear Upper Coil spring fractured or broken (5.3.1 (b) (i))7
Exhaust carbon monoxide content at idle exceeds default limits |8.2.1.2 |b||7
Nearside Front Anti-roll bar attachment bracket/mounting insecure |2.4.G.1|7
Nearside Front Anti-roll bar linkage ball joint likely to become detached |5.3.4 |a| |ii||7
Offside Front Service brake lagging in operation |1.2.1 |d||7
Nearside Front Brake hose excessively twisted (1.1.12 (b) (ii))7
rear brakes release unevenly |3.7.B.4|7
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))7
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))7
Hazard warning switch insecure |1.4.B.1d|7
Nearside Rear Exhaust has a major leak of exhaust gases |7.1.2|7
Offside Seat belt anchorage prescribed area is inadequately repaired |5.2.6|7
Inner Front brake disc excessively pitted |3.5.1h|7
Driver`s seat insecure |6.2.A.1|7
Rear coil spring broken |2.4.C.1a|7
Nearside Front Headlamp insecure |1.7.3|7
Nearside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i))7
Offside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|7
Offside Front Subframe mounting prescribed area is excessively corroded floor |2.4.A.3|7
Offside Front Side repeater not working (4.4.1 (a) (ii))7
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))7
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))7
Offside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|7
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii||7
Nearside Rear Wheel bearing has excessive play |5.1.3 |a| |i||7
Speedometer cannot be illuminated. |6.7.3|7
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i))7
Power steering pipe/hose excessively corroded (2.1.5 (g) (i))7
Nearside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))7
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))7
Offside Front Anti-roll bar linkage cracked |2.4.G.1|7
Offside Front Suspension arm corroded and seriously weakened |2.4.G.1|7
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i||7
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i))7
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|7
Offside Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3|7
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|7
Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))7
Rear Stop lamp not working |1.2.1b|7
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))7
Offside Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6|7
Horn control missing |1.6.1|7
Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i))7
Offside Seat belt anchorage prescribed area is excessively corroded floor |5.2.6|7
Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))7
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded (7.1.1 (a) (i))7
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))7
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|7
Nearside Rear Shock absorbers has negligible damping effect (5.3.2 (d))7
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail |5.3.6 |a| |i||7
Offside Front Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3|7
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|7
Offside Front Anti-roll bar ball joint excessively worn |5.3.4 |a| |i||7
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i||7
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill |7.1.1 |a| |i||7
Offside Front Seat belt anchorage prescribed area is excessively corroded floor |5.2.6|7
Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))7
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))7
Nearside Front Lower Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|7
Nearside Front Seat belt anchorage prescribed area is excessively corroded floor |5.2.6|7
Nearside Rear Brake disc significantly and obviously worn |1.1.14 |a| |i||7
Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))7
Offside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a|7
Rear Brake pipe leaking |3.6.A.1|7
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a|7
Front Power steering pipe|s| or hose|s| excessively corroded |2.3.2|7
Offside Rear Brake hose leaking |3.6.A.1|7
Power steering component leaking |2.1.5 |a||7
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1|7
Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3|7
Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3|7
Nearside Front position lamp|s| not in good working order |function impaired| |1.1.4a|7
Power steering pipe/hose excessively corroded |2.1.5 |g| |i||7
Emissions not tested exhaust blow (8.2.1.2 (d))7
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6|7
Central Stop lamp|s| not working |4.3.1 |a| |ii||7
Nearside Front Road wheel fixing missing (5.2.1 (a) (i))7
Offside Front Hydraulic brake calliper leaking (1.1.16 (b) (i))7
Offside Rear Direction indicator not working (4.4.1 (a) (ii))7
Front Service brake excessively fluctuating |1.2.1 |e||7
Nearside Rear Rear wheel bearing rough when rotated |2.6.1|7
Power steering inoperative and steering adversely affected (2.1.5 (c) (ii))7
Nearside Front Headlamp aim not tested (4.1.2 (b))7
Offside Front Anti-roll bar linkage ball joint likely to become detached |5.3.4 |a| |ii||7
Nearside Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|7
Offside Rear Brake disc significantly and obviously worn |1.1.14 |a| |i||7
Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))7
Registration plate issues6
Rear parking brake recording little or no effort6
Parking brake: efficiency below requirements (3.7.B.7)6
Rear Exhaust system insecure |6.1.2 |a||6
Nearside Rear wheel bearing rough when rotated |2.6.1|6
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch |7.1.1 |a| |i||6
Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))6
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2|6
Nearside Headlamp levelling device inoperative (4.1.5 (a))6
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))6
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))6
Nearside Rear Position lamp not working |4.2.1 |a||6
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6|6
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))6
Offside Headlamp levelling device inoperative (4.1.5 (a))6
Nearside Rear position lamp|s| incorrect colour |1.1.A.3e|6
Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.3.D.1|6
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||6
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||6
Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii))6
Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))6
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i||6
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i||6
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))6
Nearside Front Headlamp aim not tested |1.8.A.1c|6
Offside Side repeater incorrect colour (4.4.3 (a))6
Nearside Rear Parking |secondary brake| on a single line braking system has inadequate effort at a wheel |1.3.1 |a| |i||6
Offside Side repeater incorrect colour |1.4.A.2f|6
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i))6
Front Windscreen wiper not operating automatically when switched on |8.2.1b|6
Nearside Front Floor excessively deteriorated (6.2.4 (a) (i))6
Nearside Rear Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|6
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2|6
Nearside Rear Anti-roll bar linkage worn and seriously weakened |2.4.G.1|6
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))6
Offside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1|6
Nearside front brake recording little or no effort |3.7.B.5a|6
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i))6
Nearside Front All position lamps not working |4.2.1 |a||6
Nearside Front Headlamp insecure (4.1.1 (c))6
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|6
Windscreen damaged and affecting the drivers view of the road (3.2 (a) (ii))6
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail |5.3.6 |a| |i||6
Offside Front Seat belt retracting mechanism defective |5.2.5b|6
Offside Front Brake disc significantly and obviously worn |1.1.14 |a| |i||6
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))6
Nearside Rear Anti-roll bar ball joint excessively worn |5.3.4 |a| |i||6
Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))6
Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|6
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))6
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))6
Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor |5.2.6|6
Offside Front Shock absorber has an excessively worn bush |2.7.4|6
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a|6
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))6
Offside Front Tie bar/rod fractured |2.4.G.1|6
Brake pedal creeps down while the pedal is held under pressure |3.3.B.1a|6
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2|6
Nearside Headlamp aim not tested |4.1.2 |b||6
Nearside Rear Upper coil spring broken |2.4.C.1a|6
Rear coil spring fractured |2.4.C.1a|6
Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a|6
Nearside Inner Rear Road wheel bead rim badly distorted |4.2.A.1a|6
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))6
Headlamp aim unable to be tested (4.1.2 (b))6
Offside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a|6
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d|6
Offside Rear Direction indicator not working |1.4.A.2c|6
Nearside Headlamp aim not tested (4.1.2 (b))6
Offside Rear Shock absorbers has negligible damping effect (5.3.2 (d))6
Engine MIL inoperative or indicates a malfunction |8.2.2.2 |g||6
Offside Rear Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i))6
Nearside Front Lower Suspension arm corroded and seriously weakened |5.3.3 |b| |i||6
Offside Headlamp light intensity severely reduced |4.1.4 |a||6
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))6
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i))6
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))6
Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))6
Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))6
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))6
Nearside Rear Brake cable has restricted free movement |3.5.1k|6
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill |7.1.1 |a| |i||6
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))6
Nearside Rear An item not tested |Manual|6
Offside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii))6
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i))6
Offside Rear Anti-roll bar linkage ball joint likely to become detached |5.3.4 |a| |ii||6
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))6
Rear Exhaust emissions likely to be affected by an exhaust leak |8.2.1.1 |b||6
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|6
Nearside Front Floor excessively deteriorated |6.2.4 |a| |i||6
Nearside Rear Stop lamp emits other than a steady red light |1.2.1e|6
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3|6
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6|6
Brake pedal anti-slip provision missing |3.3.A.1b|6
Nearside Body has a sharp edge caused by damage |6.1.C.1|6
Nearside Outer Rear brake disc excessively pitted |3.5.1h|6
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg (6.2.2 (d) (i))6
Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))6
Central Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))6
Offside Rear Valve stem seriously damaged |5.2.3 |j||6
Nearside Front Position lamp adversely affected by the operation of another lamp (4.2.3 (c))6
Rear fog lamp switch missing |1.3.1a|6
Horn sound not in accordance with requirements (7.7 (c))6
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||6
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))6
Nearside Rear Hydraulic brake calliper leaking and braking performance affected |1.1.16 |b| |ii||6
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||6
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|6
Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||6
Offside Rear Anti-roll bar linkage missing |2.4.G.1|6
Front Power steering pipe/hose excessively corroded (2.1.5 (g) (i))6
Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))6
Front Exhaust system not adequately supported |7.1.1|6
Offside Rear Coil spring not correctly located |2.4.C.2|6
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail |5.3.6 |a| |i||6
Offside Inner Front brake disc excessively scored |3.5.1h|6
Rear Stop lamp(s) all not working (4.3.1 (a) (iii))6
rear brake recording little or no effort |3.7.B.5a|6
Offside Front brake disc has restricted free movement |3.5.1j|6
Nearside Rear Hydraulic brake calliper leaking and braking performance affected (1.1.16 (b) (ii))6
Rear Exhaust has a major leak of exhaust gases joint |7.1.2|6
Offside Rear Parking |secondary brake| on a single line braking system has inadequate effort at a wheel |1.3.1 |a| |i||6
Nearside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))6
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))6
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))6
Exhaust emissions exceed manufacturers specified limit (8.2.2.2 (a))6
Nearside Rear Rear wheel bearing has excessive play |2.6.2|6
Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2|6
Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c|5
Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b|5
Central Rear Rear fog lamp not working (4.5.1 (a) (ii))5
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|5
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i))5
Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6|5
Nearside Headlamp aim unable to be tested (4.1.2 (b))5
Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))5
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))5
Offside Front position lamp(s) not working (1.1.A.3b)5
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|5
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))5
Offside Front Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))5
Horn sounds harsh or grating |1.6.2e|5
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i||5
Exhaust has part of the system excessively deteriorated |7.1.1a|5
Offside Rear fog lamp emits a light other than red |1.3.2e|5
Rear Brake cable insecure5
Rear Brake lining|s| less than 1.5 mm thick |3.5.1g|5
Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6|5
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))5
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2|5
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))5
Offside Rear Anti-roll bar ball joint excessively worn |5.3.4 |a| |i||5
Offside Front Lower Suspension component ball joint excessively worn |5.3.4 |a| |i||5
Rear Rear fog lamp not working (4.5.1 (a) (ii))5
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))5
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii))5
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))5
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))5
Nearside Front Position lamp not working (4.2.1 (a) (ii))5
Exhaust carbon monoxide content at idle exceeds manufacturers specified limits (8.2.1.2 (b))5
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))5
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))5
Exhaust carbon monoxide content at idle exceeds manufacturer`s specified limits |8.2.1.2 |b||5
Offside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))5
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))5
Offside Front Headlamp aim not tested |1.8.A.1c|5
Exhaust has a major leak of exhaust gases back box (6.1.2 (a))5
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2|5
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|5
Nearside Rear Floor excessively deteriorated (6.2.4 (a) (i))5
Offside Rear Floor excessively deteriorated (6.2.4 (a) (i))5
Drivers airbag obviously inoperative (7.1.5 (c))5
Offside Front Brake hose excessively twisted |1.1.12 |b| |ii||5
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i))5
Offside Front Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2|5
Offside Obligatory mirror missing |8.1.1|5
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))5
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|5
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))5
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))5
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||5
Offside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))5
brake disc excessively scored |3.5.1h|5
Nearside Rear Upper Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))5
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))5
Nearside Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i||5
Offside Rear Hydraulic brake calliper leaking and braking performance affected |1.1.16 |b| |ii||5
Offside Rear Outer Subframe mounting prescribed area is excessively corroded sill |2.4.A.3|5
Nearside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3|5
Offside Front Direction indicator incorrect colour |1.4.A.2f|5
Nearside Outer Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3|5
Nearside Rear Floor excessively deteriorated |6.2.4 |a| |i||5
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i||5
Nearside Side repeater incorrect colour (4.4.3 (a))5
Nearside Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))5
Nearside Rear Upper Coil spring fractured or broken |5.3.1 |b| |i||5
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))5
Fuel system component leaking |7.2.3|5
Nearside Front Tie bar/rod has excessive play in a ball joint |2.4.G.2|5
Brake pedal has insufficient reserve travel |1.1.2 |a||5
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))5
Offside Side repeater not working |4.4.1 |a| |ii||5
Nearside Front Anti-roll bar ball joint likely to become detached |5.3.4 |a| |ii||5
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))5
Nearside Front Anti-roll bar ball joint excessively worn |5.3.4 |a| |i||5
Offside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))5
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||5
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))5
Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing |2.4.A.3|5
Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii||5
Rear rear brake excessively fluctuating |3.7.B.3|5
Offside Rear Anti-roll bar linkage insecurely attached |5.3.3 |a| |i||5
Nearside Front Suspension arm corroded and seriously weakened |2.4.G.1|5
Offside Rear Brake pipe leaking on an air braking system (1.1.11 (b) (i))5
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))5
Offside Outer Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|5
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6|5
Offside Front Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1|5
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))5
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))5
Nearside Rear Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii))5
Brake pipe leaking on a hydraulic braking system front to rear (1.1.11 (b) (ii))5
Emissions unable to be completed due to exhaust leak (8.2.1.2 (d))5
Front Service brake excessively binding |1.2.1 |f||5
Nearside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||5
Fluid leak harmful to the environment or a risk to other road users coolant (8.4.1 (a) (i))5
Nearside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1|5
Steering system excessively rough |2.2.D.1|5
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))5
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))5
Nearside Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))5
Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))5
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6|5
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2|5
Brake pipe leaking front to rear |3.6.A.1|5
Offside Front Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii))5
Offside Rear fog lamp missing |1.3.2a|5
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i))5
Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6|5
Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|5
Rear fog lamp tell-tale not working |4.9.1 |a| |ii||5
Offside Front Drivers airbag missing (7.1.5 (a))5
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor (5.3.6 (a) (i))5
Offside Front Lower Suspension arm corroded and seriously weakened |5.3.3 |b| |i||5
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i||5
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))5
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3|5
Nearside Front Headlamp aim projected beam image is obviously incorrect |4.1.2 |c||5
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||5
Rear coil spring broken both |2.4.C.1a|5
Offside front brake grabbing severely |3.7.A.2b|5
Nearside Front Subframe mounting prescribed area is excessively corroded inner sill |2.4.A.3|5
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer`s specified limits |8.2.1.2 |a||5
Nearside Side repeater insecure |1.4.A.2b|5
Nearside Front Anti-roll bar locating pin insecure |2.4.G.3a|5
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||5
Offside Front Tie bar/rod insecure |2.4.G.1|5
Nearside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))5
Offside Front Service brake grabbing severely |1.2.1 |c||5
Nearside Rear Suspension arm corroded and seriously weakened |5.3.3 |b| |i||5
Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c|5
Nearside Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))5
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))5
Nearside Front Direction indicator incorrect colour |1.4.A.2f|5
Offside Front Position lamp light intensity significantly reduced |4.2.3 |a| |ii||5
Offside Front Anti-roll bar linkage attachment bracket/mounting fractured (5.3.3 (b) (ii))5
Offside Outer Front Seat belt anchorage prescribed area is excessively corroded |5.2.6|5
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |6.1.1 |c| |i||5
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))5
Upper Stop lamp not working |1.2.1b|5
Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3|5
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill area |7.1.1 |a| |i||5
Undertray likely to become detached |6.2.1 |a| |ii||5
Offside Front Upper Suspension arm corroded and seriously weakened (5.3.3 (b) (i))5
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill |7.1.1 |a| |i||5
Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing |2.4.A.3|5
Nearside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))5
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3|5
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6|5
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i))5
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))5
Nearside Front Anti-roll bar linkage worn and seriously weakened |2.4.G.1|5
Nearside Rear Body has a sharp edge caused by damage |6.1.C.1|5
Offside Front Brake lining|s| less than 1.5 mm thick |3.5.1g|5
Nearside Headlamp has a product on the lens so that the light output is severely reduced |4.1.4 |b||5
Offside Headlamp has a product on the lens so that the light output is severely reduced |4.1.4 |b||5
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi (5.3.6 (a) (i))5
Brake hydraulic reservoir fluid level significantly below minimum level |1.1.10 |d| |ii||5
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))5
Front Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))5
Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||5
Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3|5
Offside Rear Coil spring corroded so that its cross sectional area is reduced and seriously weakened (5.3.1 (b) (i))5
Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3|5
Nearside Headlamp aim beam image kick up to the offside |1.8|5
Offside Headlamp aim beam image kick up to the offside |1.8|5
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i||5
Offside Rear Rear wheel bearing rough when rotated |2.6.1|5
Offside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a|5
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg |6.1.A.1|5
Anti-lock braking system warning lamp does not illuminate |1.6 |a||5
Offside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))5
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))5
Offside Front front brake grabbing severely |3.7.A.2b|5
Offside Headlamp insecure (4.1.1 (c))5
Brake pedal anti-slip provision worn smooth |3.3.A.1b|5
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg (6.2.2 (d) (i))5
Rear fog lamp emits a light other than red |1.3.2e|5
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mount (5.3.6 (a) (i))5
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2|5
Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||5
Oil leaking excessively from engine |8.4.1 |a| |i||5
Windscreen wiper not working (3.4 (a))5
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i))5
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1|5
Offside Rear Tie bar/rod has excessive play in a ball joint |2.4.G.2|5
Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2|5
Main beam tell-tale not working (4.9.1 (a) (ii))5
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii||5
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))5
Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))5
Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing |2.4.A.3|5
Offside Rear Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii))5
Offside Front Wheel bearing rough when rotated |5.1.3 |b| |i||5
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))5
Offside Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6|5
Horn not working |1.6.2a|4
Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))4
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))4
Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))4
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))4
Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))4
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))4
Windscreen washer not working 4
Offside rear brake grabbing severely |3.7.A.5b|4
Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))4
Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))4
Nearside Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a||4
Nearside Front Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b|4
Offside Rear Outer Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i))4
Nearside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|4
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|4
Nearside Front Brake hose stretched |found during steering lock to lock check| |2.2.D.2b|4
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i||4
Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))4
Nearside Front Anti-roll bar linkage cracked |2.4.G.1|4
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))4
Offside Front Position lamp not working side light (4.2.1 (a) (ii))4
Nearside Rear Parking brake efficiency below requirements (1.4.2 (a) (i))4
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg (6.1.1 (c) (i))4
Offside Front Windscreen wiper blade missing (3.4 (b) (ii))4
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i))4
Power steering inoperative and steering adversely affected |2.1.5 |c| |ii||4
Nearside Front Direction indicator adversely affected by the operation of another lamp |1.4.A.2h|4
Offside Rear Road wheel cracked |4.2.A.1a|4
Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))4
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i))4
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis (6.2.2 (d) (i))4
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i))4
Offside Front Brake hose connection leaking on a hydraulic braking system (1.1.12 (c) (ii))4
Nearside Outer Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|4
Headlamp aim not tested |1.8.A.1c|4
Brake fluid warning lamp inoperative |3.6.G.2|4
Offside Rear Battery insecure and likely to fall from carrier (4.13 (a) (ii))4
Nearside Rear Brake lining|s| less than 1.5 mm thick |3.5.1g|4
Rear Exhaust has a major leak of exhaust gases silencer (6.1.2 (a))4
Offside Front Lower Ball joint has excessive play |2.2.B.1f|4
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill (7.1.1 (a) (i))4
Offside Rear Anti-roll bar linkage insecure and impairing directional stability |5.3.3 |a| |ii||4
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg |6.1.A.1|4
Nearside Front Anti-roll bar linkage insecurely attached |5.3.3 |a| |i||4
Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened |5.3.3 |b| |i||4
Hydraulic fluid leaking excessively |8.4.1 |a| |i||4
Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))4
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))4
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis (6.1.1 (c) (i))4
Offside Side repeater missing |1.4.A.2b|4
Offside Rear Service brake has no recorded effort at a wheel |1.2.1 |a| |ii||4
Nearside Front Anti-roll bar attachment bracket/mounting fractured |2.4.G.1|4
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))4
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|4
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|4
Offside Rear Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii))4
Offside Parking brake lever has no reserve travel |3.1.6b|4
Offside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|4
Bonnet cannot be secured in the closed position |8.4.1|4
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i))4
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))4
Offside Front Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1|4
Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|4
Nearside Front Brake disc significantly and obviously worn |1.1.14 |a| |i||4
Nearside Front Brake pipe twisted |found during steering lock to lock check| |2.2.D.2b|4
Nearside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))4
Offside Front All position lamps not working |4.2.1 |a||4
Offside Rear Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii||4
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2|4
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2|4
Offside Front Anti-roll bar linkage insecure broken |2.4.G.1|4
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i||4
Front passenger door cannot be opened from inside the vehicle |6.2.B.1b|4
Nearside Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6|4
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6|4
Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|4
Nearside Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|4
rear brake juddering severely |3.7.A.5b|4
Nearside Front Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii))4
Nearside Seat belt buckle not functioning as intended (7.1.2 (d))4
Offside Front Brake pipe leaking |3.6.A.1|4
Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|4
Nearside Rear Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii))4
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|4
Nearside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii))4
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||4
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||4
Offside Rear rear parking |secondary| brake grabbing severely |3.7.B.6b|4
Offside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||4
Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f))4
Front Service brake excessively binding both (1.2.1 (f))4
Rear Brake disc significantly and obviously worn both sides (1.1.14 (a) (i))4
Nearside Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e|4
Front Exhaust mounting missing |7.1.1b|4
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2|4
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2|4
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))4
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))4
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))4
Offside Rear Upper Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))4
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired |5.2.6|4
Nearside Rear Service brake has no recorded effort at a wheel |1.2.1 |a| |ii||4
Power steering malfunctioning |2.1.5 |a||4
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill (7.1.1 (a) (i))4
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))4
Nearside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|4
Nearside Rear Lower Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|4
Rear Service brake excessively binding both (1.2.1 (f))4
Parking brake lever inoperative (1.1.6 (d))4
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))4
Offside Front Anti-roll bar linkage ball joint likely to become detached detached (5.3.4 (a) (ii))4
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded (7.1.1 (a) (i))4
Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner sill |2.4.A.3|4
Offside Front Service brake indicates brake bind |3.7.D.2a|4
Offside Windscreen wiper not working (3.4 (a))4
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|4
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i||4
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i||4
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i||4
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i))4
Offside Front Body has a sharp edge caused by damage |6.1.C.1|4
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))4
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii))4
Offside Rear Inner Subframe mounting prescribed area is excessively corroded sill |2.4.A.3|4
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded arch |5.2.6|4
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill (5.3.6 (a) (i))4
Nearside Rear Anti-roll bar linkage damaged and seriously weakened |2.4.G.1|4
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|4
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii))4
Offside Brake pipe leaking |3.6.A.1|4
Nearside Front Lower Suspension arm corroded and seriously weakened |2.4.G.1|4
Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3|4
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i))4
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg (5.3.6 (a) (i))4
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg (5.3.6 (a) (i))4
Nearside Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i))4
Offside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))4
Driver`s airbag missing |5.4.1|4
Offside Rear Suspension arm has excessive play in a pin/bush |2.4.G.2|4
Nearside Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|4
Offside Braking system leaking |3.6.A.1|4
Offside Front Anti-roll bar attachment bracket/mounting fractured |2.4.G.1|4
Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i||4
Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a|4
Horn not loud enough to be heard by another road user |1.6.2b|4
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|4
Offside Front Suspension component mounting prescribed area is excessively corroded Chassis |2.4.A.3|4
Front Front position lamp|s| incorrect colour |1.1.A.3e|4
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))4
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||4
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||4
Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii))4
Emissions not tested |7.4.B.1|4
Nearside Front front brake grabbing severely |3.7.A.2b|4
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i||4
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner wing |5.2.6|4
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail |5.3.6 |a| |i||4
Fuel cap/sealing device does not fasten securely by positive means |7.2.4b|4
Rear Battery insecure |1.9.1|4
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3|4
Nearside Front Position lamp light intensity significantly reduced |4.2.3 |a| |ii||4
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))4
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6|4
Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|4
Nearside Front Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii))4
Offside Rear Suspension component mounting prescribed area is excessively corroded Inner sill |2.4.A.3|4
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))4
Nearside Front Shock absorbers has an excessively worn bush (5.3.2 (c))4
Nearside Rear Anti-roll bar linkage fractured (5.3.3 (b) (ii))4
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))4
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))4
Nearside Outer Front Seat belt anchorage prescribed area is excessively corroded |5.2.6|4
Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))4
Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))4
Front Oil leaking excessively from engine (8.4.1 (a) (i))4
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))4
Offside Headlamp not working on main beam |4.1.1 |a| |ii||4
Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3|4
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill area |7.1.1 |a| |i||4
Offside Front Road wheel bead rim badly distorted |4.2.A.1a|4
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))4
Offside Front Anti-roll bar linkage likely to become detached |5.3.3 |a| |ii||4
Offside Front Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3|4
Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|4
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))4
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3|4
Nearside Front Lower Ball joint has excessive play |2.2.B.1f|4
Nearside rear brake grabbing severely |3.7.A.5b|4
Nearside Headlamp aim beam image too far to the right |1.6.B4|4
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis (5.3.6 (a) (i))4
Offside Front Valve stem seriously damaged |5.2.3 |j||4
Exhaust emits clearly visible black smoke during acceleration (8.2.1.2 (g))4
Offside Front Upper Coil spring fractured or broken (5.3.1 (b) (i))4
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|4
Nearside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a|4
Nearside Stop lamp emits other than a steady red light |1.2.1e|4
Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))4
Offside Rear Upper Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|4
Offside Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))4
Nearside Subframe mounting prescribed area is excessively corroded |2.4.A.3|4
Nearside Rear Coil spring corroded so that its cross sectional area is reduced and seriously weakened (5.3.1 (b) (i))4
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))4
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i||4
Nearside Front Road wheel distorted |4.2.A.1a|4
Rear Exhaust has a major leak of exhaust gases joint |6.1.2 |a||4
Nearside Front Power steering pipe/hose leaking |2.1.5 |a||4
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i||4
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i||4
Rear Service brake imbalanced across an axle (1.2.1 (b) (i))4
Emissions not tested due to exhaust leak (8.2.1.2 (d))4
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |8.1.1 |a||4
Drivers seat insecure (6.2.5 (a) (ii))4
Bonnet cannot be secured in the closed position (3.1 (b) (i))4
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer Sill (7.1.1 (a) (i))4
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))4
Nearside Front Anti-roll bar linkage attachment bracket/mounting fractured (5.3.3 (b) (ii))4
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))4
Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i||4
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i||4
Driver`s airbag obviously defective |5.4.1|4
Offside Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii))4
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii||4
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))4
Nearside Outer Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|4
Nearside Rear Upper Coil spring fractured or broken (5.3.1 (b) (i))4
Nearside Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a|4
Offside Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a|4
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced arch (7.1.1 (a) (i))4
Offside Front Ball joint has excessive play |2.2.B.1f|4
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))4
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f|4
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f|4
Front Position lamp not working both sides (4.2.1 (a) (ii))4
Offside Rear Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|4
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))4
Offside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6|4
Front Position lamp not working (4.2.1 (a) (ii))4
Offside Headlamp aim beam image too far to the right |1.6.B4|4
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i))4
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i||4
Nearside Rear Road wheel fixing loose (5.2.1 (a) (i))4
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))4
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||4
Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i||4
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail (5.3.6 (a) (i))4
Nearside Inner Front brake disc excessively scored |3.5.1h|4
Offside Front Anti-roll bar linkage damaged and seriously weakened |5.3.3 |b| |i||4
Nearside Front Upper Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))4
Nearside Rear Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|4
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill |6.2.2 |d| |i||4
Rear Service brake excessively fluctuating |1.2.1 |e||4
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan (5.3.6 (a) (i))4
Offside Front Upper Anti-roll bar linkage insecure |2.4.G.1|4
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area (7.1.1 (a) (i))4
Nearside Front Side repeater missing |1.4.A.2b|4
Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|4
Nearside Rear Road wheel badly damaged |4.2.A.1a|4
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i||4
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|4
Nearside Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))4
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))4
Rear fog lamp switch faulty |1.3.1a|4
Offside Rear Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|4
Offside Front Seat belt buckle not functioning as intended (7.1.2 (d))4
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))4
Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))4
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))4
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i||4
Offside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))4
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to floor |6.1.B.2|4
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg |5.3.6 |a| |ii||4
Offside Rear coil spring corroded so that its cross sectional area is reduced and seriously weakened |2.4.C.1b|4
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))4
Offside Stop lamp emits other than a steady red light |1.2.1e|4
Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|4
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor |7.1.1 |a| |i||4
Offside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii||4
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting (5.3.6 (a) (i))4
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))4
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i||4
Nearside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a|4
Nearside front brakes release unevenly |3.7.B.4|4
Offside Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c|4
Nearside Seat belt anchorage prescribed area is excessively corroded floor |5.2.6|4
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))4
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected floor |5.3.6 |a| |ii||4
Front Brake disc significantly and obviously worn |1.1.14 |a| |i||4
Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|4
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i||4
Offside Rear Tie bar/rod has excessive play in a pin/bush |2.4.G.2|4
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii||4
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))4
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))4
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner and outer sills |5.2.6|4
Offside Front Track rod end ball joint has excessive play |2.1.3 |b| |i||4
Offside Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6|4
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing |2.4.A.3|4
Offside Front Subframe mounting prescribed area is excessively corroded inner sill |2.4.A.3|4
Nearside Front Headlamp are incorrectly positioned (4.1.4 (a))3
Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|3
Fuel cap/sealing device mounting flange/sealing method defective |7.2.4c|3
Indicator switch faulty |1.4.A.1|3
Offside Rear Seat belt anchorage prescribed area is inadequately repaired |5.2.6|3
Offside Front Brake hose stretched |found during steering lock to lock check| |2.2.D.2b|3
Offside Seat belt retracting mechanism defective |5.2.5b|3
Nearside Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f|3
Nearside Front Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3|3
Offside Front Upper Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))3
Nearside Rear Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii))3
Front Position lamp not working nearside and offside (4.2.1 (a) (ii))3
Rear Rear fog lamp missing (4.5.1 (a) (ii))3
Nearside Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2|3
Parking brake lever defective so that it cannot be satisfactorily operated (1.1.6 (d))3
Rear Battery insecure and likely to fall from carrier (4.13 (a) (ii))3
Offside Rear Battery insecure |1.9.1|3
Drivers seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i))3
Nearside Rear Brake disc contaminated (1.1.14 (b))3
Offside Rear Brake lever has insufficient reserve travel (1.1.2 (a))3
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))3
Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|3
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area (7.1.1 (a) (i))3
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer Sill |7.1.1 |a| |i||3
Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))3
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i||3
Nearside Front Upper Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))3
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|3
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))3
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))3
Offside Rear Brake valve leaking caliper (1.1.7 (d) (i))3
Nearside Rear Anti-roll bar linkage ball joint likely to become detached |5.3.4 |a| |ii||3
Nearside Front Suspension component mounting prescribed area is fractured |2.4.A.3|3
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis area (5.3.6 (a) (i))3
Front Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b|3
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill |6.1.1 |c| |i||3
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i))3
Central Front Position lamp not working (4.2.1 (a) (ii))3
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis |5.3.6 |a| |i||3
Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||3
Rear Exhaust silencer insecure (8.1.1 (b) (i))3
Rear fog lamp tell-tale missing (4.9.1 (a) (ii))3
Nearside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a|3
Nearside Rear Shock absorber has negligible damping effect |2.7.5|3
Nearside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))3
Offside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))3
Parking brake: efficiency below requirements (3.7.B.7)3
Central Exhaust system insecure (6.1.2 (a))3
Offside Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))3
Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))3
Nearside Front Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2|3
Nearside Rear Anti-roll bar ball joint likely to become detached |5.3.4 |a| |ii||3
Offside Rear Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii))3
Brake pedal creeps down when held under pressure |3.3.B.1a|3
Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|3
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i))3
Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2|3
Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i))3
Rear Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii))3
Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6|3
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to floor |6.1.B.2|3
Nearside Front position lamp|s| has a product on the light source so it is not visible from a reasonable distance |1.1.A.3d|3
Offside Rear Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement |2.4.G.2|3
coil spring broken |2.4.C.1a|3
Offside Rear Body panel corroded and likely to cause injury (6.2.1 (a) (i))3
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i))3
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg |5.3.6 |a| |ii||3
Nearside Front Upper Suspension arm corroded and seriously weakened (5.3.3 (b) (i))3
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i))3
Offside Headlamp aim not tested |4.1.2 |b||3
Offside Rear Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6|3
Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii))3
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i))3
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))3
Rear Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3|3
Offside Rear Rear fog lamp missing |1.3.2a|3
Offside Front Headlamp aim not tested |4.1.2 |b||3
Offside Rear Suspension component mounting prescribed area is excessively corroded outersill |2.4.A.3|3
Offside Rear Lower Anti-roll bar has excessive play in a ball joint |2.4.G.2|3
Headlamp aim beam image kick up to the offside |1.8|3
Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i))3
Offside Outer Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6|3
Offside Front Road wheel fixing loose (5.2.1 (a) (i))3
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis (6.1.1 (c) (ii))3
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i))3
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i))3
Headlamp lens seriously defective (4.1.1 (b) (ii))3
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6|3
Offside brake disc excessively pitted |3.5.1h|3
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced |4.1.4 |b||3
Offside Rear Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii))3
Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|3
Nearside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii||3
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))3
Electronic braking system warning device indicates a fault (1.7 (b))3
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i||3
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i||3
Offside Rear Anti-roll bar linkage attachment bracket/mounting fractured (5.3.3 (b) (ii))3
Nearside Front Direction indicator adversely affected by the operation of another lamp (4.4.3 (b))3
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|3
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3|3
Rear Service brake excessively binding |1.2.1 |f||3
Nearside Front Subframe mounting prescribed area is fractured |2.4.A.3|3
Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c|3
Nearside Front Subframe mounting prescribed area is excessively corroded floor |2.4.A.3|3
Centre Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e|3
Offside Rear Outer Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill (6.2.2 (d) (ii))3
Offside Stop lamp|s| all not working |4.3.1 |a| |iii||3
Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||3
Nearside Inner Front Seat belt anchorage prescribed area is excessively corroded |5.2.6|3
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i||3
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch |7.1.1 |a| |i||3
Offside Rear Anti-roll bar linkage damaged and seriously weakened |2.4.G.1|3
Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|3
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting jacking point |6.2.2 |d| |i||3
Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|3
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor (7.1.1 (a) (i))3
Offside Front Suspension component mounting prescribed area is excessively corroded inner wing area |2.4.A.3|3
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i||3
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Inner arch |5.2.6|3
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded SILL |2.4.A.3|3
Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Inner sill (6.2.2 (d) (i))3
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i))3
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|3
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))3
Offside Rear Upper coil spring fractured |2.4.C.1a|3
Offside Seat belt anchorage prescribed area is excessively corroded floor to sill |5.2.6|3
Offside Rear Inner brake disc in such a condition that it is seriously weakened |3.5.1i|3
Offside Front front brakes release unevenly |3.7.B.4|3
Electronic stability system warning lamp indicates a fault |3.4.1c|3
Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|3
Offside Rear Anti-roll bar linkage ball joint excessively worn drop link |5.3.4 |a| |i||3
Offside Track rod end ball joint has excessive play |2.1.3 |b| |i||3
Offside Front Windscreen wiper not working (3.4 (a))3
Offside Rear Tie bar/rod insecure |2.4.G.1|3
front brake binding both |3.7.B.1|3
Offside Front Tie bar/rod has excessive play in a ball joint |2.4.G.2|3
Offside Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|3
Offside Front Brake back plate|s| securing device excessively deteriorated |3.5.1j|3
Service brake: efficiency below requirements |3.7.C.1a|3
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2|3
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))3
Offside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill |5.2.6|3
Nearside Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6|3
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting (5.3.6 (a) (i))3
Nearside Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3|3
Position lamp not working both front (4.2.1 (a) (ii))3
Offside Rear Position lamp not working (4.2.1 (a) (ii))3
Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))3
Nearside Front Shock absorbers has a serious fluid leak3
Rear fog lamp tell-tale not working (4.9.1 (a) (ii))3
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))3
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a))3
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))3
Nearside Parking brake inoperative on one side (1.4.1 (a))3
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))3
Registration plate lamp issues3
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))3
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)3
Exhaust has a major leak of exhaust gases (6.1.2 (a))3
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))3
Offside Rear Parking brake inoperative on one side (1.4.1 (a))3
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))3
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))3
Nearside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i))3
Stop lamp(s) not working (4.3.1 (a) (ii))3
Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|3
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg (5.3.6 (a) (ii))3
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor |7.1.1 |a| |i||3
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))3
Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|3
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))3
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i))3
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))3
Offside Rear Body has a sharp edge caused by corrosion wheel arch |6.1.C.1|3
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength closing panel |5.3.6 |a| |i||3
Offside Rear Brake cable has restricted free movement |3.5.1k|3
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))3
Nearside Rear Braking system leaking calliper |3.6.A.1|3
Offside Rear Braking system leaking calliper |3.6.A.1|3
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||3
Offside Front Wheel nut|s| loose |4.2.A.1e|3
Body has a sharp edge caused by damage |6.1.C.1|3
Nearside Rear Brake hose leaking |3.6.A.1|3
Centre Exhaust has part of the system excessively deteriorated |7.1.1a|3
Nearside Front Steering locking device missing |2.2.C.1g|3
Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))3
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Sill (7.1.1 (a) (i))3
Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))3
Rear Sub-frame attachment bracket/mounting insecure |2.4.G.1|3
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner and outer sills |5.2.6|3
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i))3
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outersill |5.2.6|3
Nearside Rear Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii))3
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))3
Offside Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a|3
Offside Rear Wheel bolt|s| missing |4.2.A.1e|3
Front Undertray likely to become detached |6.2.1 |a| |ii||3
Offside Rear Anti-roll bar linkage damaged and seriously weakened |5.3.3 |b| |i||3
Nearside Steering locking device missing |2.2.C.1g|3
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer body sill |5.2.6|3
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer body sill |5.2.6|3
Fuel cap/sealing device missing |7.2.4a|3
Rear Exhaust emissions likely to be affected by an exhaust leak joint (8.2.1.1 (b))3
Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2|3
Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|3
Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii))3
Offside Outer Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|3
Offside Front Headlamp aim projected beam image is obviously incorrect no beam image (4.1.2 (c))3
Headlamp has a product on the lens so that the light output is severely reduced both (4.1.4 (b))3
Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d|3
Nearside Front brake caliper securing device missing |3.5.1j|3
Hazard warning switch missing |1.4.B.1d|3
Nearside Seat belt anchorage prescribed area is inadequately repaired |5.2.6|3
Offside Side repeater light intensity significantly reduced (4.4.3 (a))3
Nearside Rear Outer Subframe mounting prescribed area is excessively corroded sill |2.4.A.3|3
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired |7.1.1 |a| |i||3
Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3|3
Nearside Rear brake disc has restricted free movement |3.5.1j|3
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner arch |5.2.6|3
Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))3
Headlamp not working on dipped beam (4.1.1 (a) (ii))3
Nearside Front Wheel stud|s| missing |4.2.A.1e|3
Rear Rear fog lamp does not emit a steady red light (4.5.4 (a))3
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))3
Offside Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i))3
Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|3
Central Rear Exhaust has a major leak of exhaust gases |7.1.2|3
Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))3
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||3
Nearside Front Service brake lagging in operation |1.2.1 |d||3
Offside Front Inner Subframe mounting prescribed area is excessively corroded sill |2.4.A.3|3
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Outer Sill |5.2.6|3
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under sill (7.1.1 (a) (i))3
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis |6.1.A.1|3
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis |6.1.A.1|3
Offside Front Coil spring not correctly located |2.4.C.2|3
Exhaust catalytic converter missing where one was fitted as standard |8.2.1.1 |a||3
Offside Front Headlamp aim unable to be tested (4.1.2 (b))3
Nearside Front Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))3
Nearside Front Power steering component leaking (2.1.5 (a))3
Offside Rear Brake pipe connection leaking on a hydraulic braking system (1.1.11 (b) (ii))3
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))3
Nearside Front Brake hose excessively twisted |1.1.12 |b| |ii||3
Nearside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))3
Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|3
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2|3
Offside Front Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement |2.4.G.2|3
Emissions not tested |8.2.2.2 |e||3
Offside Rear Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3|3
Rear Coil spring fractured or broken both (5.3.1 (b) (i))3
Offside Front Upper Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))3
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail |6.1.1 |c| |i||3
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill |6.2.2 |d| |i||3
Central Front Exhaust has a major leak of exhaust gases (6.1.2 (a))3
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i))3
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))3
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i))3
Offside Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e|3
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2|3
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail |6.1.1 |c| |i||3
Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii||3
Central Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii))3
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i||3
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i||3
Nearside Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a||3
Offside Rear Anti-roll bar linkage worn and seriously weakened |2.4.G.1|3
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2|3
Nearside Front Brake hose leaking |3.6.A.1|3
Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))3
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i||3
Offside Rear Seat belt anchorage prescribed area is inadequately repaired inner sill (7.1.1 (a) (i))3
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))3
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))3
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outter sill |5.2.6|3
Offside Rear Wheel bearing rough when rotated |5.1.3 |b| |i||3
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i))3
Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|3
Offside Front Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii))3
Offside Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a||3
Offside Rear brake disc modified and seriously weakened |3.5.1n|3
Offside Rear Seat belt anchorage prescribed area is excessively corroded floor |5.2.6|3
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))3
Nearside Rear Brake disc significantly and obviously worn inner face (1.1.14 (a) (i))3
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength boot floor (5.3.6 (a) (i))3
Nearside Rear Outer Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))3
Offside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii))3
Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii))3
coil spring fractured |2.4.C.1a|3
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))3
Exhaust engine idle speed too high |7.3.D.1|3
Offside Rear Road wheel fixing missing |5.2.1 |a| |i||3
Offside Front Brake hose damaged and likely to fail (1.1.12 (a))3
Centre Rear Upper Stop lamp not working |1.2.1b|3
Nearside Front Wheel bearing has excessive play |5.1.3 |a| |i||3
Nearside Front Position lamp not working sidelight |4.2.1 |a||3
Centre Rear Exhaust has a major leak of exhaust gases |7.1.2|3
Nearside Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii))3
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))3
Offside Seat belt locking mechanism does not secure or release |5.2.5a|3
Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))3
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|3
Nearside Rear rear brake juddering severely |3.7.A.5b|3
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced arch |7.1.1 |a| |i||3
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))3
Offside Rear Brake pipe fouled by moving parts |3.6.B.2a|3
Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))3
Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))3
Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f||3
Power steering pipe/hose damaged such that the steering is adversely affected (2.1.5 (g) (ii))3
Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|3
Nearside coil spring broken |2.4.C.1a|3
Nearside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a|3
Power steering component leaking steering rack (2.1.5 (a))3
Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii))3
Offside Front Tie bar/rod has excessive play in a pin/bush |2.4.G.2|3
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))3
Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii||3
Offside Front Anti-roll bar linkage likely to become detached (5.3.3 (a) (ii))3
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i))3
Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|3
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill |5.2.6|3
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill (7.1.1 (a) (i))3
Offside Front Hydraulic brake calliper leaking |1.1.16 |b| |i||3
Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|3
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i||3
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded wheel arch |5.2.6|3
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded wheel arch |5.2.6|3
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i||3
Parking brake lever is impeded in its travel |3.1.6c|3
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))3
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))3
Offside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))3
Offside Front Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))3
Offside Seat belt anchorage prescribed area is excessively corroded OUTER SILL |5.2.6|3
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))3
Offside Rear Body has a sharp edge caused by damage |6.1.C.1|3
Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))3
Offside Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i))3
Fuel cap/sealing device missing (6.1.3 (b) (i))3
Nearside Front Windscreen wiper blade missing (3.4 (b) (ii))3
Nearside Front Direction indicators not working |1.4.A.2c|3
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))3
Driver`s airbag missing |7.1.5 |a||3
Offside Headlamp aim unable to be tested (4.1.2 (b))3
Nearside Front Hydraulic brake calliper leaking |1.1.16 |b| |i||3
Nearside Front Position lamp not working side (4.2.1 (a) (ii))3
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||3
Nearside Rear Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3|3
Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|3
Nearside Rear Coil spring fractured or broken broken (5.3.1 (b) (i))3
Nearside Front Brake hose excessively damaged (1.1.12 (b) (ii))3
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))3
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i||3
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i))3
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill |7.1.1 |a| |i||3
Nearside Front Anti-roll bar linkage missing (5.3.3 (a) (ii))3
Headlamp aim beam image obviously incorrect |1.8.A.1b|3
Emissions not tested due to exhaust (8.2.1.2 (d))3
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced boot floor (6.1.1 (c) (i))3
Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))3
Offside Front Service brake grabbing severely |3.7.C.2|3
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills (7.1.1 (a) (i))3
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i||3
Offside Front Upper Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|3
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))3
Nearside Front Road wheel fixing missing |5.2.1 |a| |i||3
Offside Outer Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3|3
Rear Exhaust emissions likely to be affected by an exhaust leak |8.2.2.1 |b||3
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))3
Nearside Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6|3
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))3
Offside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3|3
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front chassis legs (5.3.6 (a) (i))3
Suspension component mounting prescribed area is excessively corroded both rear outer sills |2.4.A.3|3
Central Exhaust emissions likely to be affected by an exhaust leak |8.2.1.1 |b||3
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i))3
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))3
Nearside Rear Body has a projection caused by corrosion |6.1.C.1|3
Offside Rear Body has a projection caused by corrosion |6.1.C.1|3
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i||3
Offside Rear Lower Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))3
Headlamp not working on dipped beam |1.7.5a|3
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |6.1.1 |c| |i||3
Nearside Rear Inner Integral body structure inadequately repaired such that structural rigidity is significantly reduced sill (6.1.1 (d) (i))3
Nearside Front Brake pipe fouled by moving parts |3.6.B.2a|3
Offside Front Brake pipe fouled by moving parts |3.6.B.2a|3
Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3|3
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill |7.1.1 |a| |i||3
Nearside Front Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii))3
Offside Front Brake hose excessively stretched (1.1.12 (b) (ii))3
Headlamp levelling device inoperative |4.1.5 |a||3
Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis leg (5.3.3 (b) (i))3
Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||3
Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mounting |2.4.A.3|3
Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|3
Offside Front Direction indicators not working |1.4.A.2c|3
Offside Headlamp not in good working order |not working| |1.2.4a|3
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))3
Central Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))3
Undertray likely to become detached (6.2.1 (a) (ii))3
Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))3
Offside Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a|3
Nearside Rear Brake pipe leaking on an air braking system (1.1.11 (b) (i))3
Offside Rear Suspension component mounting prescribed area is inadequately repaired outer sill (5.3.6 (a) (i))3
Offside Front Direction indicator incorrect colour |4.4.3 |a||3
Front Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))3
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|3
Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d|3
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill |6.1.A.1|3
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill |6.1.A.1|3
Offside Front Anti-roll bar attachment bracket/mounting insecure and impairing directional stability |5.3.3 |a| |ii||3
Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction |3.1 |a| |ii||3
Nearside Front Valve stem seriously damaged |5.2.3 |j||3
Nearside Rear Valve stem seriously damaged |5.2.3 |j||3
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg |5.3.6 |a| |i||3
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg |5.3.6 |a| |i||3
Offside Rear fog lamp does not emit a steady red light (4.5.4 (a))3
Central Rear Exhaust has a major leak of exhaust gases |6.1.2 |a||3
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))3
Offside Front Anti-roll bar insecurely attached (5.3.3 (a) (i))3
Offside Front Lower Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2|3
Offside Rear Anti-roll bar linkage fractured |5.3.3 |b| |ii||3
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing |5.3.6 |a| |i||3
Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1|3
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|3
Nearside Rear Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))3
Nearside Front Wheel bearing rough when rotated |5.1.3 |b| |i||3
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))3
Parking brake inoperative on one side (1.4.1 (a))3
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i||3
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i||3
Rear Wheel nut|s| missing |4.2.A.1e|3
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))3
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis |5.3.6 |a| |ii||3
Nearside Rear Subframe mounting prescribed area is excessively corroded outer sill |2.4.A.3|3
Offside Rear Subframe mounting prescribed area is excessively corroded outer sill |2.4.A.3|3
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill |6.1.B.2|3
Centre Upper Stop lamp not working |1.2.1b|3
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))3
Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i||3
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill (7.1.1 (a) (i))3
Front Exhaust has a major leak of exhaust gases |6.1.2 |a||3
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS LEG (6.1.1 (c) (i))3
Nearside Rear Front position lamp|s| not working |1.1.A.3b|3
Power steering pipe/hose leaking on rack (2.1.5 (a))3
Offside Rear Lower Suspension arm insecure and impairing directional stability (5.3.3 (a) (ii))3
Driver`s door cannot be opened from inside the vehicle |6.2.B.1b|3
Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))3
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i))3
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i))3
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))3
Nearside Front Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii))3
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded door sill |5.2.6|3
Brake pedal anti-slip provision missing (1.1.2 (c))3
Parking |secondary brake| on a single line braking system imbalanced across an axle Axle 1 |1.3.1 |b| |i||3
Offside Front Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3|3
Offside Front Seat belt locking mechanism does not secure or release |5.2.5a|3
Brake pipe leaking on a hydraulic braking system Front to rear (1.1.11 (b) (ii))3
Nearside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|3
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill area (7.1.1 (a) (i))3
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill |6.2.2 |d| |i||3
Offside Rear Service brake lagging in operation |1.2.1 |d||3
Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii))3
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))3
Offside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a|3
Nearside Front Upper Suspension arm ball joint likely to become detached (5.3.4 (a) (ii))3
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))3
Nearside Rear position lamp|s| insecure |1.1.A.3a|3
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||3
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))3
Front Bumper insecure (6.1.4 (a) (i))3
Offside Front Brake hose excessively damaged |3.6.B.4d|3
Offside Front Subframe mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))3
Offside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i))3
Nearside Front Subframe mounting prescribed area is excessively corroded Chassis leg |2.4.A.3|3
Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|3
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i||3
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i||3
Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|3
Rear Exhaust has a major leak of exhaust gases silencer |7.1.2|3
Rear Exhaust has a major leak of exhaust gases box |7.1.2|3
Offside Front Suspension component mounting prescribed area is inadequately repaired chassis (5.3.6 (a) (i))3
brake caliper leaking |3.6.A.1|3
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))3
Nearside Rear Tie bar/rod has excessive play in a ball joint |2.4.G.2|3
Nearside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6|3
Nearside Rear Seat belt anchorage prescribed area is excessively corroded OUTER SILL |5.2.6|3
Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mount |2.4.A.3|3
Offside Headlamp lens seriously defective |4.1.1 |b| |ii||3
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))3
Nearside Outer Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|3
Nearside Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2|3
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Floor (7.1.1 (a) (i))3
Nearside Front Service brake indicates brake bind |3.7.D.2a|3
Offside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|3
Steering wheel rim loose (2.2.1 (c) (i))3
Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f|3
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))3
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2|3
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2|3
Nearside Inner Front Road wheel bead rim badly distorted |4.2.A.1a|3
Offside Rear Rear fog lamp does not emit a steady red light (4.5.4 (a))3
Nearside Front Windscreen wiper not working (3.4 (a))3
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))3
Offside Front Anti-roll bar linkage damaged and seriously weakened (5.3.3 (b) (i))3
Offside Front Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c|3
Offside Rear Anti-roll bar ball joint likely to become detached |5.3.4 |a| |ii||3
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i))3
Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii))3
Offside Indicator tell tale inoperative |1.4.A.2a|2
Nearside Front Headlamp lens seriously defective |4.1.1 |b| |ii||2
Offside Front Headlamp lens seriously defective |4.1.1 |b| |ii||2
Offside Headlamp incorrect colour |1.7.5b|2
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail (6.1.1 (c) (i))2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i))2
Nearside Front Front position lamp|s| not working side light |1.1.A.3b|2
Offside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1|2
Brake pedal creeps down under servo assistance and touches the floor |3.3.C.3|2
Offside Front Anti-roll bar linkage ball joint excessively worn drop link |5.3.4 |a| |i||2
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))2
Nearside Front Brake hose connection leaking on a hydraulic braking system |1.1.12 |c| |ii||2
Offside Seat belt anchorage prescribed area is inadequately repaired Outer sill |5.2.6|2
Offside Rear Seat belt anchorage prescribed area is excessively corroded Inner arch |5.2.6|2
front parking |secondary| brakes imbalanced |3.7.B.6b|2
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3|2
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced end of sill (7.1.1 (a) (i))2
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both outer sills (5.3.6 (a) (i))2
Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Braking system leaking rear brake pipe |3.6.A.1|2
Nearside Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|2
Offside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a|2
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i))2
Headlamp aim out of alignment2
Steering wheel has excessive movement up and down (2.2.2 (a))2
Nearside Front Anti-roll bar cracked |2.4.G.1|2
Nearside Rear Upper Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|2
Nearside Seat belt not functioning as intended (7.1.2 (c))2
Offside Front Lower Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|2
Nearside Front Suspension component mounting prescribed area is excessively corroded chassi |2.4.A.3|2
Offside Front Suspension component mounting prescribed area is excessively corroded chassi |2.4.A.3|2
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg (6.2.2 (d) (i))2
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg (6.2.2 (d) (i))2
Power steering ram|s| leaking from a failed component |2.3.3b|2
Offside Front Service brake effort inadequate at a wheel |1.2.1 |a| |i||2
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i))2
Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i||2
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis section around roll bar mounting point. |5.3.6 |a| |ii||2
Nearside Rear Body panel corroded and likely to cause injury wheel arch |6.2.1 |a| |i||2
Nearside Rear Coil spring not correctly located |2.4.C.2|2
Nearside Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheelarch (5.3.6 (a) (i))2
Rear Brake disc significantly and obviously worn both (1.1.14 (a) (i))2
Nearside Front position lamp|s| not working 501 bulb |1.1.A.3b|2
Offside Rear Service brake indicates brake bind |3.7.D.2a|2
Nearside Rear rear brake recording little or no effort Parking brake |3.7.B.5a|2
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill (5.3.6 (a) (i))2
Offside Seat belt not functioning as intended (7.1.2 (c))2
Rear fog lamp switch not operating in accordance with the requirements (4.5.3 (a))2
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills (7.1.1 (a) (i))2
Offside Rear Outer Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))2
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear outer sill (7.1.1 (a) (i))2
Subframe mounting prescribed area is excessively corroded |2.4.A.3|2
Emissions not tested due to exhaust blow |8.2.1.2 |d||2
Rear Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a))2
Nearside Parking brake recording little or no effort |3.7.D.3a|2
Nearside Side repeater missing |4.4.1 |a| |ii||2
Offside Side repeater missing |4.4.1 |a| |ii||2
Offside Rear Battery insecure and likely to fall from carrier |4.13 |a| |ii||2
Offside Front Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))2
Nearside Seat belt anchorage prescribed area is excessively corroded rear outer sill |5.2.6|2
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii||2
Suspension component mounting prescribed area is excessively corroded n/s/f chassis |2.4.A.3|2
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))2
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sill (5.3.6 (a) (i))2
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))2
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||2
Windscreen in an unacceptable condition (3.2 (c) (i))2
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i))2
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg |6.2.2 |d| |i||2
Main beam tell-tale missing (4.9.1 (a) (ii))2
Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||2
Nearside Front Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3|2
Offside Front position lamp|s| not working side light |1.1.A.3b|2
Nearside Rear Service brake grabbing severely (1.2.1 (c))2
Offside coil spring broken |2.4.C.1a|2
Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))2
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer Sill |7.1.1 |a| |i||2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor (5.3.6 (a) (i))2
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid calliper |3.6.A.1|2
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))2
Bonnet retaining device insecure |8.4.2|2
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))2
Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch/chassis |2.4.A.3|2
Offside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2|2
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch (5.3.6 (a) (i))2
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg/inner wing 30cm within anti roll bar/sub frame mount |2.4.A.3|2
Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg/inner wing 30cm within anti roll bar/sub frame mounts |2.4.A.3|2
Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))2
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer Sill (5.3.6 (a) (i))2
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Sill (5.3.6 (a) (i))2
Offside Rear Upper coil spring incomplete |2.4.C.1a|2
Rear coil spring broken both sides |2.4.C.1a|2
Offside Front Suspension component mounting prescribed area is excessively corroded CHASSIS |2.4.A.3|2
Offside Front Suspension component mounting prescribed area is excessively corroded Anti roll bar mount |2.4.A.3|2
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cill (6.1.1 (c) (i))2
Offside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength inner sill (5.3.6 (a) (i))2
Offside Headlamp aim beam image too far to the left |1.6.B4|2
Offside Rear Seat belt anchorage prescribed area is excessively corroded door sill |5.2.6|2
Offside Front Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii))2
Offside Seat belt anchorage prescribed area is excessively corroded outersill |5.2.6|2
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded |7.1.1 |a| |i||2
Offside Front Suspension component mounting prescribed area is excessively corroded Corroded in 3 areas of the chassis leg. |2.4.A.3|2
Front Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii))2
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i||2
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i))2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength main chassis (5.3.6 (a) (i))2
Central Front Undertray insecure (8.1.1 (b) (i))2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis |5.3.6 |a| |i||2
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6|2
Nearside Rear Lower Coil spring fractured or broken (5.3.1 (b) (i))2
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))2
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))2
Offside Front Outer Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))2
Offside Obligatory mirror insecure (3.3 (b) (ii))2
Front Exhaust has a major leak of exhaust gases flexi (6.1.2 (a))2
Nearside Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c|2
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)2
Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))2
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)2
Horn control missing (1.6.1)2
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)2
Front passenger door cannot be opened from outside the vehicle |6.2.B.1b|2
Offside Front Upper Anti-roll bar linkage fractured |2.4.G.1|2
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis Leg (6.1.1 (c) (i))2
Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|2
Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Centre Exhaust system not adequately supported |7.1.1|2
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in wheel arch (6.1.1 (c) (i))2
Nearside Front Body has a sharp edge caused by corrosion wing |6.1.C.1|2
Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|2
Offside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill |7.1.1 |a| |i||2
Offside Seat belt buckle not functioning as intended (7.1.2 (d))2
Nearside Body has a sharp edge caused by damage door mirror |6.1.C.1|2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis leg (5.3.6 (a) (i))2
Offside Front Floor excessively deteriorated corroded (6.2.4 (a) (i))2
Central Rear Upper Stop lamp(s) not working (4.3.1 (a) (ii))2
Rear Anti-roll bar insecure |2.4.G.1|2
Offside Seat belt anchorage prescribed area is excessively corroded rear of outer sill |5.2.6|2
Nearside Rear Upper Anti-roll bar has excessive play in a ball joint |2.4.G.2|2
Offside Front Upper Anti-roll bar has excessive play in a ball joint |2.4.G.2|2
Offside Front Lower Anti-roll bar has excessive play in a ball joint |2.4.G.2|2
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill (5.3.6 (a) (ii))2
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill (5.3.6 (a) (ii))2
Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))2
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||2
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill area (7.1.1 (a) (i))2
Nearside Front Subframe mounting prescribed area is excessively corroded Chassis area/upper and lower |2.4.A.3|2
Offside Front Lower Subframe mounting prescribed area is excessively corroded Chassis/under wing |2.4.A.3|2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan (5.3.6 (a) (i))2
Nearside Front Brake hose excessively stretched (1.1.12 (b) (ii))2
Seat belt anchorage prescribed area is excessively corroded both rear outer sills |5.2.6|2
Seat belt anchorage prescribed area strength or continuity significantly reduced both outer sills (7.1.1 (a) (i))2
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i))2
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill (7.1.1 (a) (i))2
Nearside Rear Service brake application uneven across the axle |3.7.D.2b|2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in arch (5.3.6 (a) (i))2
Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g))2
Nearside Headlamp lens seriously defective |4.1.1 |b| |ii||2
Nearside Rear rear parking |secondary| brake grabbing severely |3.7.B.6b|2
Offside Front Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6|2
Nearside front parking |secondary| brake grabbing severely |3.7.B.6b|2
Nearside Front Anti-roll bar linkage missing |5.3.3 |a| |ii||2
Offside Front Anti-roll bar linkage missing |5.3.3 |a| |ii||2
Offside Rear Stop lamp|s| all not working |4.3.1 |a| |iii||2
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))2
Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))2
Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i||2
Nearside Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a|2
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1|2
Nearside Rear Body panel corroded and likely to cause injury (6.2.1 (a) (i))2
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))2
Offside Front Upper Front suspension locking device missing |2.5.A.4|2
Brake pedal anti-slip provision incomplete |3.3.A.1b|2
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in wheel arch (6.1.1 (c) (i))2
Nearside Front Side repeater incorrect colour |1.4.A.2f|2
Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2|2
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))2
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded |7.1.1 |a| |i||2
Nearside Front Anti-roll bar linkage has excessive play in a pin/bearing |2.4.G.2|2
Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii))2
Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))2
Nearside Front Service brake excessively binding wheel bearing not checked (1.2.1 (f))2
Offside Front Service brake excessively binding wheel bearing not checked (1.2.1 (f))2
Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|2
Offside Front Windscreen wiper missing (3.4 (a))2
Nearside Rear Suspension component mounting prescribed area is inadequately repaired outer sill (5.3.6 (a) (i))2
Nearside Front Upper Anti-roll bar linkage synthetic mounting deteriorated resulting in excessive movement |2.4.G.2|2
Nearside Rear Upper Anti-roll bar linkage synthetic mounting deteriorated resulting in excessive movement |2.4.G.2|2
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i))2
Nearside Rear Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4|2
Nearside Front Vehicle structure has a fracture which adversely affects braking or steering |6.1.A.1|2
Nearside Rear Brake hose connection leaking on a hydraulic braking system (1.1.12 (c) (ii))2
Centre Front Parking brake lever has no reserve travel |3.1.6b|2
Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis (5.3.3 (b) (i))2
Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis (5.3.3 (b) (i))2
Offside Front Direction indicator adversely affected by the operation of another lamp (4.4.3 (b))2
Nearside Rear position lamp|s| incomplete |1.1.4a|2
Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2|2
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))2
Offside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))2
Offside front brakes release unevenly |3.7.B.4|2
Offside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))2
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer cill |5.2.6|2
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis above front sub frame & anti roll bar holed (6.1.1 (c) (ii))2
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Both rear outer sills (6.1.1 (c) (i))2
Offside Rear Anti-roll bar linkage severely distorted |2.4.G.1|2
Nearside Seat belt anchorage prescribed area is excessively corroded outer sill panel |5.2.6|2
Nearside Front Headlamp aim beam image kick up to the offside |1.8|2
Nearside Rear Road wheel badly distorted |5.2.2 |c| |i||2
Nearside Front Front position lamp|s| not in good working order |function impaired| |1.1.4a|2
Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i||2
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing (6.2.2 (d) (i))2
Offside Rear Integral body structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii))2
Nearside Front Anti-roll bar attachment bracket/mounting likely to become detached (5.3.3 (a) (ii))2
Nearside Rear Road wheel badly distorted (5.2.2 (c) (i))2
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i))2
Nearside Front Road wheel fixing loose (5.2.1 (a) (i))2
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))2
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill (6.2.2 (d) (i))2
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outer sill (5.3.6 (a) (i))2
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))2
Offside Inner Rear Road wheel bead rim badly distorted |4.2.A.1a|2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor, next to lower arm (5.3.6 (a) (i))2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor, next to lower arm (5.3.6 (a) (i))2
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced silll (7.1.1 (a) (i))2
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sills |5.3.6 |a| |i||2
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))2
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||2
Rear brake disc modified and seriously weakened |3.5.1n|2
Nearside brake disc excessively pitted |3.5.1h|2
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill (7.1.1 (a) (i))2
Offside Rear Tie bar/rod fractured |2.4.G.1|2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi (5.3.6 (a) (i))2
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))2
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area (7.1.1 (a) (i))2
Offside Front Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a|2
Offside Front Headlamp has a product on the lens so that the light output is severely reduced |4.1.4 |b||2
Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))2
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i))2
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end |5.3.6 |a| |i||2
Nearside Front Headlamp has a product on the light source which changes emitted colour to other than white or yellow (4.1.4 (b))2
Offside Front Headlamp has a product on the light source which changes emitted colour to other than white or yellow (4.1.4 (b))2
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i))2
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor (7.1.1 (a) (i))2
Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Front Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b|2
Nearside Headlamp cleaning device inoperative |1.7.2|2
Offside Headlamp cleaning device inoperative |1.7.2|2
Exhaust has a major leak of exhaust gases back box missing |6.1.2 |a||2
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer and inner sills |5.2.6|2
Nearside Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3|2
Front Service brake excessively binding both |1.2.1 |f||2
Offside Seat belt anchorage prescribed area is excessively corroded outer sill panel |5.2.6|2
Nearside Rear position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b|2
Nearside Stop lamp has less than 50% of the light sources illuminating |1.2.1b|2
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Nearside Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6|2
Nearside Rear Service brake lagging in operation |1.2.1 |d||2
Nearside Front Brake lining|s| less than 1.5 mm thick |3.5.1g|2
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i))2
Offside Front Headlamp aim beam image kick up to the offside |1.6.B1|2
Nearside Rear front brake recording little or no effort |3.7.B.5a|2
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|2
Nearside Front front brakes release unevenly |3.7.B.4|2
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill area (7.1.1 (a) (i))2
Nearside Front Track rod end seriously misaligned (2.1.3 (e))2
Seat belt anchorage prescribed area strength or continuity significantly reduced both sills |7.1.1 |a| |i||2
Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||2
Nearside Front Subframe mounting prescribed area is excessively corroded inner wing |2.4.A.3|2
Central Front Undertray likely to become detached (6.2.1 (a) (ii))2
Offside Front Headlamp aim beam image kick up to the offside |1.8|2
Rear fog lamp obviously incorrectly positioned |1.3.2a|2
Braking system leaking Front to rear pipe |3.6.A.1|2
Offside Rear Seat belt anchorage prescribed area is excessively corroded Outer Sill |5.2.6|2
Offside Rear Seat belt anchorage prescribed area is excessively corroded floor area |5.2.6|2
Offside Rear Stop lamp(s) lens defective such that the emitted light is adversely affected (4.3.1 (b) (ii))2
Offside Front All position lamps have less than 50% of the light sources illuminating |1.1.A.3b|2
Offside Rear Battery insecure and likely to cause a short circuit (4.13 (a) (ii))2
Offside Front Wheel insecure |4.2.A.1c|2
Offside Front Anti-roll bar linkage insecure link broken |2.4.G.1|2
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill holed |2.4.A.3|2
Offside Front Lower Body panel insecure wing (6.2.1 (a) (i))2
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))2
Nearside All position lamps not working |1.1.A.3b|2
Offside Front Suspension component mounting prescribed area is excessively corroded chassis under arch |2.4.A.3|2
Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i||2
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))2
Nearside Seat belt anchorage prescribed area is excessively corroded outer sill at rear |5.2.6|2
Nearside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|2
Nearside Front Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|2
Exhaust emits visible black smoke at idle |7.3.A.2b|2
Rear rear brake recording little or no effort |3.7.B.5a|2
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor |7.1.1 |a| |i||2
Nearside Rear Lower Suspension arm damaged and seriously weakened (5.3.3 (b) (i))2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/inner sill (5.3.6 (a) (i))2
Offside Front Lower Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2|2
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))2
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near anti roll bar mounting (6.1.1 (c) (i))2
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near anti roll bar mounting (6.1.1 (c) (i))2
Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outer sill (5.3.6 (a) (i))2
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded sill corroded |2.4.A.3|2
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch |7.1.1 |a| |i||2
Offside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer and inner sill |5.2.6|2
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Inner sill |5.2.6|2
Nearside Rear Anti-roll bar rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2|2
Offside Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|2
Offside Front Body component insecure wing (6.2.1 (a) (i))2
Nearside Front Suspension component mounting prescribed area is excessively corroded Inner sill |2.4.A.3|2
Offside Front Suspension component mounting prescribed area is excessively corroded Inner sill |2.4.A.3|2
Offside Rear front parking brake recording little or no effort |3.7.B.6a|2
Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Nearside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))2
Nearside Front front brake recording little or no effort |3.7.B.5a|2
Offside Front Seat belt anchorage prescribed area is excessively corroded floorpan |5.2.6|2
Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid |1.1.16 |b| |i||2
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch |6.2.2 |d| |i||2
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing holed |6.1.1 |c| |i||2
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch holed |6.1.1 |c| |i||2
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing |6.1.1 |c| |i||2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner flitch (5.3.6 (a) (i))2
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||2
Nearside Rear Brake lever has restricted free movement |3.5.1k|2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor area |5.3.6 |a| |i||2
Nearside Front position lamp|s| not working side light |1.1.A.3b|2
Offside Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|2
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced rear sill (7.1.1 (a) (i))2
Front Subframe mounting prescribed area is excessively corroded |2.4.A.3|2
Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2|2
Centre Lower Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e|2
Nearside Rear Radius arm has excessive play in a pin/bush |2.4.G.2|2
Offside Rear Anti-roll bar worn and seriously weakened |2.4.G.1|2
Rear An item not tested |Manual|2
Emissions not tested (8.2.2.2 (e))2
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||2
Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||2
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3|2
Offside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3|2
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))2
Offside Front front brake recording little or no effort |3.7.B.5a|2
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i||2
Offside Front Anti-roll bar has excessive play in a ball joint droplink |2.4.G.2|2
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheelarch (7.1.1 (a) (i))2
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2|2
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill. (7.1.1 (a) (i))2
Inner Rear brake disc excessively pitted |3.5.1h|2
Nearside Rear Anti-roll bar linkage fractured |5.3.3 |b| |ii||2
Offside Rear Seat belt anchorage prescribed area is excessively corroded sill panel |5.2.6|2
Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill panel |5.2.6|2
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sil |5.2.6|2
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))2
Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Outer sill (6.2.2 (d) (i))2
Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3|2
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch (5.3.6 (a) (i))2
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i))2
Offside Rear Outer Suspension component mounting prescribed area is inadequately repaired Sill |2.4.A.3|2
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))2
Offside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))2
Offside Front Shock absorbers has negligible damping effect (5.3.2 (d))2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))2
Nearside Front Upper coil spring fractured |2.4.C.1a|2
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan (7.1.1 (a) (i))2
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced undersill (7.1.1 (a) (i))2
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis rail (5.3.6 (a) (i))2
Nearside Front Anti-roll bar linkage likely to become detached |5.3.3 |a| |ii||2
Nearside Rear Sub-frame insecurely attached (5.3.3 (a) (i))2
Offside Rear Sub-frame insecurely attached (5.3.3 (a) (i))2
Offside Rear Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii))2
Nearside Front Front passenger door cannot be opened from inside the vehicle |6.2.3 |a||2
Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|2
Front position lamp|s| not working BOTH |1.1.A.3b|2
Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d|2
Nearside Front Service brake grabbing severely |1.2.1 |c||2
Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3|2
Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wing |2.4.A.3|2
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2|2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan |5.3.6 |a| |i||2
Nearside Rear Direction indicator incorrect colour |1.4.A.2f|2
Nearside Rear Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|2
Central Front Power steering pipe|s| or hose|s| leaking |2.3.3b|2
Offside Front Anti-roll bar has excessive play in a pin/bearing |2.4.G.2|2
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill |5.3.6 |a| |i||2
Nearside Rear Inner brake disc in such a condition that it is seriously weakened |3.5.1i|2
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting jacking point |6.2.2 |d| |i||2
Front Parking brake lever has no reserve travel |3.1.6b|2
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area (6.1.1 (c) (i))2
Offside Rear Seat belt anchorage prescribed area is inadequately repaired sill |5.2.6|2
Nearside Rear Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii||2
Engine MIL inoperative or indicates a malfunction light on (8.2.1.2 (h))2
Nearside Front Service brake grabbing severely (1.2.1 (c))2
Offside Rear Suspension component mounting prescribed area is fractured |2.4.A.3|2
Steering wheel has movement relative to the column such that there is a serious risk of detachment (2.2.1 (a) (ii))2
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|2
Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt x2 |5.3.4 |b| |ii||2
Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt x2 |5.3.4 |b| |ii||2
Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill corroded and holed (6.1.1 (c) (i))2
Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill corroded and holed (6.1.1 (c) (i))2
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i))2
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i))2
Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill holed |5.2.6|2
Offside Rear Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2|2
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|2
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||2
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))2
Front Headlamp aim beam image obviously incorrect |1.8.A.1b|2
Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|2
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint broken |2.4.G.2|2
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2|2
Offside Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii||2
coil spring broken n/s front |2.4.C.1a|2
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))2
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i||2
Offside Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii||2
Nearside Rear Suspension component mounting prescribed area is inadequately repaired outer sill |5.3.6 |a| |i||2
Offside Rear Suspension component mounting prescribed area is inadequately repaired outer sill |5.3.6 |a| |i||2
Stop lamp not working high level |1.2.1b|2
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor |7.1.1 |a| |i||2
Offside Direction indicator not working (4.4.1 (a) (ii))2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/sill (5.3.6 (a) (i))2
Offside Front Suspension component mounting prescribed area is inadequately repaired floor |5.3.6 |a| |i||2
Offside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1|2
Offside Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|2
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2|2
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed and corroded (7.1.1 (a) (i))2
Nearside Front Anti-roll bar linkage damaged and seriously weakened |5.3.3 |b| |i||2
Offside Front Body component damaged and likely to cause injury wing |6.2.1 |a| |i||2
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced box section close to suspension and tow eye mounts |6.1.1 |c| |i||2
Offside Rear Rear position lamp|s| incorrect colour |1.1.A.3e|2
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||2
Nearside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Offside Front Subframe mounting prescribed area is excessively corroded Chasis |2.4.A.3|2
Nearside Parking brake efficiency below requirements (1.4.2 (a) (i))2
Front Brake pipe leaking |3.6.A.1|2
Offside Rear Lower Suspension arm likely to become detached |5.3.3 |a| |ii||2
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan |7.1.1 |a| |i||2
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2|2
Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.1 |c| |ii||2
Offside Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.1 |c| |ii||2
Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||2
Nearside Rear Wheel nut|s| loose |4.2.A.1e|2
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg (6.1.1 (c) (i))2
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i))2
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill |6.1.B.2|2
Offside Front Lower Suspension arm likely to fail |5.3.3 |b| |ii||2
Nearside Rear Upper coil spring fractured |2.4.C.1a|2
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i))2
Nearside Rear Tie bar/rod insecure |2.4.G.1|2
Nearside Front Anti-roll bar linkage synthetic mounting deteriorated resulting in excessive movement |2.4.G.2|2
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected floor |5.3.6 |a| |ii||2
Offside Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3|2
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to sill |6.1.B.2|2
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to sill |6.1.B.2|2
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill back (6.1.1 (c) (i))2
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch (5.3.6 (a) (i))2
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill panel |7.1.1 |a| |i||2
Nearside Brake hose twisted |found during steering lock to lock check| |2.2.D.2b|2
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i))2
Offside Front Suspension component mounting prescribed area is excessively corroded chassis box section |2.4.A.3|2
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||2
Offside Front Suspension spring mounting prescribed area is excessively corroded inner arch |2.4.A.3|2
Front front brake binding n/s and o/s |3.7.B.1|2
Offside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||2
Nearside Rear Inner Body panel corroded and likely to cause injury sill (6.2.1 (a) (i))2
Offside Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d|2
Brake lever locking device missing |3.5.1l|2
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6|2
Parking brake: efficiency below requirements |3.7.B.7|2
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))2
Oil leaking excessively from engine (8.4.1 (a) (i))2
Nearside Rear Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))2
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))2
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))2
Rear fog lamp not working (1.3.2b)2
Rear fog lamp switch missing (4.5.3 (a))2
Offside Rear fog lamp not working (4.5.1 (a) (ii))2
Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))2
Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))2
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))2
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))2
Offside Parking brake inoperative on one side (1.4.1 (a))2
Offside Front Direction indicator not working (4.4.1 (a) (ii))2
Offside Seat belt buckle not functioning as intended (7.1.2 (d))2
Offside Front Seat belt webbing significantly weakened (7.1.2 (b) (ii))2
Nearside Front Position lamp missing (4.2.1 (a) (ii))2
Offside Front Position lamp missing (4.2.1 (a) (ii))2
Offside Stop lamp(s) not working (4.3.1 (a) (ii))2
Nearside Stop lamp not working (1.2.1b)2
Offside Rear Rear fog lamp not working (1.3.2b)2
Battery insecure and likely to cause a short circuit (4.13 (a) (ii))2
Service brake: efficiency below requirements (3.7.B.7)2
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))2
Central Exhaust has a major leak of exhaust gases (6.1.2 (a))2
Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))2
Front Oil leaking excessively from engine (8.4.1 (a) (i))2
Nearside Side repeater not working (4.4.1 (a) (ii))2
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))2
Offside Headlamp not working on main beam (4.1.1 (a) (ii))2
Nearside Front Service brake excessively binding (1.2.1 (f))2
Front Windscreen wiper not working (3.4 (a))2
Offside Front Subframe mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i))2
Offside Front Anti-roll bar linkage pin or bush likely to become detached (5.3.4 (a) (ii))2
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan (7.1.1 (a) (i))2
Offside Seat belt anchorage prescribed area is excessively corroded floor pan |5.2.6|2
Offside Outer Seat belt anchorage prescribed area is excessively corroded sill panel |5.2.6|2
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill panel |7.1.1 |a| |i||2
Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg (5.3.6 (a) (ii))2
Suspension component mounting prescribed area is excessively corroded nearside outer sill |2.4.A.3|2
Nearside Front front brake binding Badly binding |3.7.B.1|2
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2|2
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2|2
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower sill |6.1.B.2|2
Nearside Front Side repeater not working |4.4.1 |a| |ii||2
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))2
Rear Anti-roll bar corroded and seriously weakened (5.3.3 (b) (i))2
Offside Rear Suspension arm worn and seriously weakened |2.4.G.1|2
Nearside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))2
Offside Rear Wheel nut|s| loose |4.2.A.1e|2
Offside Rear Brake cable has a seized clevis joint pivot |3.5.1c|2
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill area (5.3.6 (a) (i))2
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill area (5.3.6 (a) (i))2
Rear Exhaust has a major leak of exhaust gases tail pipe |7.1.2|2
Offside Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor holed |5.3.6 |a| |i||2
Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Nearside Front Hydraulic brake calliper leaking and braking performance affected |1.1.16 |b| |ii||2
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i))2
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced battery tray (6.1.1 (c) (i))2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i||2
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis corroded (6.1.1 (c) (i))2
Offside rear brakes release unevenly |3.7.B.4|2
Service brake efficiency less than 50% of the required value |1.2.2 |a| |ii||2
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced rear sill (7.1.1 (a) (i))2
Emissions not tested due to exhaust leak |7.3.A.1|2
Offside Steering locking device missing |2.2.C.1g|2
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i))2
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill / floor (7.1.1 (a) (i))2
Offside Front Subframe mounting prescribed area is excessively corroded inner wing |2.4.A.3|2
Offside Seat belt anchorage prescribed area is excessively corroded body sill panel adjacent to |5.2.6|2
Offside Front Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2|2
Nearside Front Hydraulic brake calliper leaking and braking performance affected (1.1.16 (b) (ii))2
Exhaust silencer likely to become detached (8.1.1 (b) (ii))2
Nearside Front Headlamp light intensity severely reduced |4.1.4 |a||2
Nearside Front Lower Anti-roll bar linkage insecurely attached |5.3.3 |a| |i||2
Offside Front Anti-roll bar insecurely attached |5.3.3 |a| |i||2
Offside Front Anti-lock braking system wiring excessively damaged |3.4.3|2
Offside Rear Anti-lock braking system wiring excessively damaged |3.4.3|2
Offside Front position lamp|s| not working sidelight |1.1.A.3b|2
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))2
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i))2
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i))2
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i||2
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i))2
Offside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i))2
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i))2
Front Front position lamp|s| not working both |1.1.A.3b|2
Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))2
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor (5.3.6 (a) (i))2
Offside Rear Position lamp has a product on the lens or light source which shows white light to the rear (4.2.3 (b) (ii))2
Central Rear Exhaust has a major leak of exhaust gases flange |7.1.2|2
Front position lamp|s| not working n/s and o/s |1.1.A.3b|2
Offside Front Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))2
Hydraulic fluid leaking excessively POWER STEERING LEAK!! (8.4.1 (a) (i))2
Nearside Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i))2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i||2
Offside Rear Subframe mounting prescribed area is excessively corroded sill |2.4.A.3|2
Offside Front Suspension component mounting prescribed area is excessively corroded arb |2.4.A.3|2
Nearside Rear Anti-roll bar linkage severely distorted |2.4.G.1|2
Nearside Rear Anti-roll bar linkage cracked |2.4.G.1|2
Nearside Front Headlamp aim projected beam image is obviously incorrect no beam image (4.1.2 (c))2
Service brake excessively binding both front (1.2.1 (f))2
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill holed (7.1.1 (a) (i))2
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill area |7.1.1 |a| |i||2
Front Service brake imbalanced across an axle |1.2.1 |b| |i||2
Nearside Front Subframe mounting prescribed area is excessively corroded chassis rail |2.4.A.3|2
Offside Front Subframe mounting prescribed area is excessively corroded chassis rail |2.4.A.3|2
Exhaust has a major leak of exhaust gases middle box |7.1.2|2
Nearside Rear Upper Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|2
Nearside Side repeater light intensity significantly reduced (4.4.3 (a))2
Nearside Front Headlamp levelling device inoperative (4.1.5 (a))2
Offside Front Headlamp levelling device inoperative (4.1.5 (a))2
Offside Rear Road wheel distorted |4.2.A.1a|2
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill at rear (7.1.1 (a) (i))2
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan |7.1.1 |a| |i||2
Offside Rear Subframe mounting prescribed area is excessively corroded inner sill |2.4.A.3|2
Nearside Rear Subframe mounting prescribed area is excessively corroded inner sill |2.4.A.3|2
Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii))2
Nearside front brake grabbing severely |3.7.A.2b|2
Nearside Front Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i||2
Offside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill (7.1.1 (a) (i))2
Offside Rear Seat belt anchorage prescribed area is inadequately repaired |7.1.1 |a| |i||2
Offside Front Body panel insecure (6.2.1 (a) (i))2
Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3|2
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer sill (7.1.1 (a) (i))2
Nearside Front Anti-roll bar linkage pin or bush likely to become detached |5.3.4 |a| |ii||2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ANTI ROLL BAR MOUNT (5.3.6 (a) (i))2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ANTI ROLL BAR MOUNT (5.3.6 (a) (i))2
Battery insecure and likely to fall from carrier floor corroded (4.13 (a) (ii))2
Offside Rear Brake lining|s| less than 1.5 mm thick |3.5.1g|2
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner arch |5.2.6|2
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner and outer sill area |5.2.6|2
Nearside Side repeater not working |4.4.1 |a| |ii||2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi |5.3.6 |a| |i||2
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill |5.3.6 |a| |i||2
Emissions not tested cat missing (8.2.1.2 (d))2
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i))2
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))2
Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))2
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sills (6.2.2 (d) (i))2
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sills (6.2.2 (d) (i))2
Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))2
Nearside Outer Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6|2
Offside Outer Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6|2
Offside Parking brake efficiency below requirements (1.4.2 (a) (i))2
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))2
Nearside Windscreen wiper blade missing (3.4 (b) (ii))2
Parking brake lever is not capable of being maintained in operation by direct mechanical action only (1.1.6 (f))2
Parking brake lever ratchet not holding correctly (1.1.6 (a))2
Offside Rear coil spring broken top coil |2.4.C.1a|2
Drivers view of the road through the swept area of the windscreen materially affected by an obstruction (3.1 (a) (ii))2
Offside Rear Road wheel badly distorted (5.2.2 (c) (i))2
Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))2
Nearside Front Shock absorber insecure |2.7.2b|2
Nearside rear parking |secondary| brake grabbing severely |3.7.B.6b|2
Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2|2
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i))2
Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both sides (5.3.6 (a) (i))2
Offside Front Suspension component mounting prescribed area is excessively corroded Antiroll bar mount |2.4.A.3|2
Offside Front Position lamp missing (4.2.1 (a) (ii))2
Nearside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii))2
Offside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii))2
Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i||2
front brake binding NEARSIDE |3.7.B.1|2
Nearside Front Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii))2
Offside Front Position lamp not working replaced bulb (4.2.1 (a) (ii))2
Nearside Obligatory mirror does not provide a view to the rear |3.3 |c||2
Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid brake caliper (1.1.16 (b) (i))2
Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))2
Seat belt anchorage prescribed area strength or continuity significantly reduced nearside rear outer sill (7.1.1 (a) (i))2
Direction indicators adversely affected by the operation of another lamp |1.4.A.2h|2
Main beam `tell-tale` not working |1.7.4c|2
Nearside Front Front passenger door cannot be opened from outside the vehicle (6.2.3 (a))2
Brake lever has insufficient reserve travel hand brake (1.1.2 (a))2
Nearside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i))2
Offside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i))2
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch (6.1.1 (c) (i))2
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch (6.1.1 (c) (i))2
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i))2
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/floor (6.1.1 (c) (i))2
Offside Front Anti-roll bar corroded and seriously weakened |2.4.G.1|2
Offside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))2
Nearside Outer Seat belt anchorage prescribed area is excessively corroded lower |5.2.6|2
Brake lever has insufficient reserve travel Hand brake (1.1.2 (a))2
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner seal (5.3.6 (a) (i))2
Front Front position lamp|s| not working Both |1.1.A.3b|2
Offside Front Stop lamp(s) not working (4.3.1 (a) (ii))2
Offside Rear Upper Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i||2
Offside Front Anti-roll bar linkage insecurely attached broken |5.3.3 |a| |i||2
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i||2
Offside Rear Coil spring fractured or broken upper coil broken (5.3.1 (b) (i))2
Position lamp not working (4.2.1 (a) (ii))2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS (5.3.6 (a) (i))2
Nearside Rear Suspension component mounting prescribed area is excessively corroded OUTER SILL |2.4.A.3|2
Offside Rear Suspension component mounting prescribed area is excessively corroded OUTER SILL |2.4.A.3|2
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill panel |7.1.1 |a| |i||2
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill panel |7.1.1 |a| |i||2
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))2
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i))2
Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))2
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))2
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch (5.3.6 (a) (i))2
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sill (7.1.1 (a) (i))2
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail |6.1.1 |c| |ii||2
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Wheel Arch (6.2.2 (d) (i))2
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2|2
Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end |5.3.6 |a| |i||2
Nearside Rear Parking brake efficiency below requirements |1.4.2 |a| |i||2
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch |7.1.1 |a| |i||2
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i||2
Offside Front Inner Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3|2
Nearside Rear Braking system leaking caliper leaking |3.6.A.1|2
Nearside Front Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1|2
Offside Rear Parking brake efficiency below requirements (1.4.2 (a) (i))2
Brake reservoir fluid level decreases after several pedal applications |3.3.C.1|2
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sil (7.1.1 (a) (i))2
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i||2
Nearside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1|2
Offside Front Suspension component mounting prescribed area is excessively corroded Chassis Leg |2.4.A.3|2
Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i||2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis corroded (5.3.6 (a) (i))2
Brake lever has insufficient reserve travel handbrake |1.1.2 |a||2
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced offside rear inner sill (6.1.1 (c) (i))2
Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired Sill (5.3.6 (a) (i))2
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i))2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength flitch (5.3.6 (a) (i))2
Front Headlamp not working on dipped beam |1.7.5a|2
Nearside Outer Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|2
Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|2
Offside Rear Brake hose connection leaking on a hydraulic braking system (1.1.12 (c) (ii))2
Rear Brake pipe likely to become detached or damaged (1.1.11 (d) (ii))2
Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2|2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section |5.3.6 |a| |i||2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section |5.3.6 |a| |i||2
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill area (6.2.2 (d) (i))2
Offside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Brake master cylinder fluid level below minimum level |3.6.G.1e|2
Nearside Rear Suspension arm severely distorted |2.4.G.1|2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i))2
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))2
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i))2
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i))2
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill |7.1.1 |a| |i||2
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill |7.1.1 |a| |i||2
Offside Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Fluid leak harmful to the environment or a risk to other road users (8.4.1 (a) (i))2
Offside Seat belt anchorage loose (7.1.1 (b))2
Rear coil spring incomplete |2.4.C.1a|2
Offside Front Vehicle structure is deformed and structural rigidity is significantly reduced (6.1.1 (a) (i))2
Nearside Front position lamp|s| flickers when tapped lightly by hand |1.1.4c|2
Offside Rear Brake disc significantly and obviously worn inner face (1.1.14 (a) (i))2
Emissions unable to be completed no cat (8.2.1.2 (d))2
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis (6.1.1 (c) (i))2
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6|2
Offside Rear Exhaust has a major leak of exhaust gases |7.1.2|2
Nearside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3|2
Offside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii))2
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor area (5.3.6 (a) (i))2
Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3|2
Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3|2
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii))2
Offside Rear Suspension component mounting prescribed area is inadequately repaired inner arch (5.3.6 (a) (i))2
Offside Rear Wheel bearing has excessive play |5.1.3 |a| |i||2
Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))2
Nearside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c))2
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i||2
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i||2
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill |6.2.2 |d| |i||2
Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a|2
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2|2
Offside Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))2
Brake fluid contaminated |1.8 |a||2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor area (5.3.6 (a) (i))2
Parking brake inoperative on one side |1.4.1 |a||2
Central Stop lamp(s) not working high level (4.3.1 (a) (ii))2
Speedometer cannot be illuminated (7.8 (c) (ii))2
Nearside Front Side repeater missing (4.4.1 (a) (ii))2
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced upper wheel arch (7.1.1 (a) (i))2
Offside Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a||2
Hazard warning switch inoperative |4.4.2 |a| |ii||2
Seat belt anchorage prescribed area strength or continuity significantly reduced Offside sill |7.1.1 |a| |i||2
Nearside Front Position lamp not working sidelight (4.2.1 (a) (ii))2
Nearside Front Ball joint has excessive play |2.2.B.1f|2
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg |6.1.1 |c| |i||2
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg |6.1.1 |c| |i||2
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area (5.3.6 (a) (i))2
Nearside Front Brake pipe inadequately clipped |3.6.B.1|2
Fuel cap/sealing device ineffective (6.1.3 (b) (i))2
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2|2
Nearside Outer Seat belt anchorage prescribed area is excessively corroded SILL |5.2.6|2
Offside Outer Seat belt anchorage prescribed area is excessively corroded SILL |5.2.6|2
Nearside Outer Suspension component mounting prescribed area is excessively corroded SILL |2.4.A.3|2
Offside Outer Suspension component mounting prescribed area is excessively corroded SILL |2.4.A.3|2
Offside Rear Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|2
Brake performance not tested due to leaking brake pipe |3.7.A.1|2
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner and outer sill |5.2.6|2
Nearside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|2
Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength chassis (5.3.6 (a) (i))2
Offside Front Lower Suspension component ball joint likely to become detached (5.3.4 (a) (ii))2
Nearside Rear Outer Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i))2
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i))2
Offside Rear Anti-roll bar insecurely attached (5.3.3 (a) (i))2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie (5.3.6 (a) (i))2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie (5.3.6 (a) (i))2
Rear Service brake excessively fluctuating both (1.2.1 (e))2
Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii))2
Rear Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2|2
Nearside Rear All position lamps not working |1.1.A.3b|2
Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))2
Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3|2
Offside Rear rear brake grabbing severely |3.7.A.5b|2
Front Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))2
Offside Rear Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill (6.2.2 (d) (i))2
Offside Rear Parking |secondary brake| on a single line braking system has no recorded effort at a wheel |1.3.1 |a| |ii||2
Offside Outer Seat belt anchorage prescribed area is severely distorted sill |5.2.6|2
Nearside Power steering pipe/hose leaking (2.1.5 (a))2
Offside Rear fog lamp not working |4.5.1 |a| |ii||2
Nearside Front Passengers seat insecure (6.2.6 (a) (ii))2
Offside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering (6.1.1 (a) (ii))2
Offside Front Drivers seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i))2
Front position lamp|s| not working n/s |1.1.A.3b|2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front chassis (5.3.6 (a) (i))2
Offside Rear Lower Suspension arm fractured (5.3.3 (b) (ii))2
Front Braking system leaking |3.6.A.1|2
Offside Front Suspension component mounting prescribed area is excessively corroded chassis corroded |2.4.A.3|2
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i||2
Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i||2
Nearside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))2
Offside Rear Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2|2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))2
Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch |6.1.1 |c| |ii||2
Front Position lamp not working n/s and o/s (4.2.1 (a) (ii))2
Offside Rear Seat belt anchorage prescribed area is excessively corroded OUTER SILL |5.2.6|2
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill |7.1.1 |a| |i||2
Front Undertray likely to become detached (6.2.1 (a) (ii))2
Offside Front Side repeater incorrect colour (4.4.3 (a))2
Nearside Front Side repeater incorrect colour (4.4.3 (a))2
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill. (7.1.1 (a) (i))2
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill panel |5.2.6|2
Nearside Front Subframe mounting prescribed area is excessively corroded CHASSIS LEG |2.4.A.3|2
Nearside Front Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))2
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill holed |5.2.6|2
Offside Position lamp light intensity significantly reduced |4.2.3 |a| |ii||2
Offside Front Lower coil spring broken |2.4.C.1a|2
Nearside Rear front parking brake recording little or no effort |3.7.B.6a|2
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill holed |5.2.6|2
Nearside Rear Braking system leaking Caliper |3.6.A.1|2
Offside Rear Seat belt anchorage prescribed area is excessively corroded under sill |5.2.6|2
Nearside Rear Service brake effort inadequate at a wheel |1.2.1 |a| |i||2
Offside Rear Anti-roll bar attachment bracket/mounting insecure (5.3.3 (a) (i))2
Offside Rear Anti-roll bar missing |2.4.G.1|2
Nearside Front Anti-roll bar missing |2.4.G.1|2
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded SILL |5.2.6|2
Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor to sill |5.2.6|2
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner and outer sill |5.2.6|2
Nearside Parking |secondary brake| on a single line braking system has no recorded effort at a wheel |1.3.1 |a| |ii||2
Offside Rear Anti-roll bar linkage likely to become detached (5.3.3 (a) (ii))2
Nearside Rear Suspension component mounting prescribed area is excessively corroded Floor |2.4.A.3|2
Direction indicators flashing more than 120 times a minute |1.4.A.2g|2
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner wing |5.2.6|2
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))2
Offside Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii))2
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||2
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||2
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill |6.2.2 |d| |i||2
Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))2
Nearside Rear Anti-roll bar linkage ball joint excessively worn droplink (5.3.4 (a) (i))2
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis Leg (6.2.2 (d) (i))2
Nearside Parking |secondary brake| on a single line braking system has inadequate effort at a wheel |1.3.1 |a| |i||2
Front Stop lamp not working |1.2.1b|2
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i))2
Nearside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded arch |2.4.A.3|2
Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded arch |2.4.A.3|2
Nearside Headlamp insecure |4.1.1 |c||2
Offside Headlamp insecure |4.1.1 |c||2
Power steering pump leaking |2.1.5 |a||2
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL |7.1.1 |a| |i||2
Nearside Rear Road wheel fixing missing |5.2.1 |a| |i||2
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2|2
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||2
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||2
Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i))2
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch |6.2.2 |d| |i||2
Electrical wiring insecure |1.9.2a|2
Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))2
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i||2
Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|2
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i))2
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i))2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))2
Offside Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6|2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis |5.3.6 |a| |i||2
Offside Rear Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii))2
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill |5.3.6 |a| |ii||2
Nearside Front Seat belt retracting mechanism defective |5.2.5b|2
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i||2
Offside Front Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))2
Nearside Rear Outer Body has a projection caused by corrosion sill |6.1.C.1|2
Nearside Front Subframe mounting prescribed area is excessively corroded chassis section |2.4.A.3|2
Offside Front Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3|2
Nearside Rear Brake hose twisted |3.6.B.4c|2
Offside Rear Direction indicator incorrect colour |1.4.A.2f|2
Driver`s airbag obviously inoperative |7.1.5 |c||2
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6|2
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded (7.1.1 (a) (i))2
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced rear sill (7.1.1 (a) (i))2
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))2
Nearside Front Stop lamp not working |1.2.1b|2
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||2
Headlamp has a product on the lens so that the light output is severely reduced Both (4.1.4 (b))2
Nearside Front Position lamp not working side light (4.2.1 (a) (ii))2
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected anti roll bar mount (5.3.6 (a) (ii))2
Steering system excessively rough |2.1.1 |a||2
Central Rear Upper Stop lamp|s| not working |4.3.1 |a| |ii||2
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill area |7.1.1 |a| |i||2
Headlamp aim projected beam image is obviously incorrect Both headlights (4.1.2 (c))2
Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))2
Nearside Front Anti-roll bar linkage damaged and seriously weakened (5.3.3 (b) (i))2
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength boot floor (5.3.6 (a) (i))2
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength boot floor (5.3.6 (a) (i))2
Headlamp not working on main beam |1.7.5a|2
Offside Rear Brake pipe at imminent risk of failure or fracture |1.1.11 |a||2
Nearside Body has a projection caused by damage |6.1.C.1|2
Offside Rear fog lamp does not emit a steady red light |4.5.4 |a||2
Offside Parking |secondary brake| on a single line braking system has inadequate effort at a wheel |1.3.1 |a| |i||2
Offside Front Anti-roll bar corroded and seriously weakened (5.3.3 (b) (i))2
Nearside Front Upper Coil spring fractured or broken |5.3.1 |b| |i||2
Offside Front Brake pipe stretched |found during steering lock to lock check| |2.2.D.2b|2
Nearside Front Brake back plate|s| securing device excessively deteriorated |3.5.1j|2
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor (7.1.1 (a) (i))2
Headlamp light source and lamp not compatible Both (4.1.4 (c))2
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill corroded (7.1.1 (a) (i))2
Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Suspension component mounting prescribed area is excessively corroded offside front floor |2.4.A.3|2
Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis leg (5.3.3 (b) (i))2
Nearside Front Lower Anti-roll bar has excessive play in a ball joint |2.4.G.2|2
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6|2
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill |7.1.1 |a| |i||2
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6|2
Nearside Rear Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii||2
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill excessively corroded (7.1.1 (a) (i))2
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill corroded through (7.1.1 (a) (i))2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis. (5.3.6 (a) (i))2
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill |5.3.6 |a| |i||2
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner outer sill/ floor (7.1.1 (a) (i))2
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner outer sill/floor (7.1.1 (a) (i))2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/chassis (5.3.6 (a) (i))2
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||2
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||2
Offside Rear Seat belt anchorage prescribed area is excessively corroded Inner sill |5.2.6|2
Offside Front Subframe mounting prescribed area is excessively corroded Inner sill |2.4.A.3|2
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced backing sill (7.1.1 (a) (i))2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing. (5.3.6 (a) (i))2
Offside Service brake effort inadequate at a wheel (1.2.1 (a) (i))2
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner wheel arch (7.1.1 (a) (i))2
Offside Front Drivers seat insecure (6.2.5 (a) (ii))2
Offside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1|2
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis (6.2.2 (d) (i))2
Offside Outer Rear brake disc excessively pitted |3.5.1h|2
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to floor (5.3.6 (a) (i))2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasis (5.3.6 (a) (i))2
Offside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))2
Offside Front Front position lamp|s| not working side light |1.1.A.3b|2
Emissions not tested due to exhaust blowing (8.2.1.2 (d))2
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed |7.1.1 |a| |i||2
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill panel |5.2.6|2
Front position lamp|s| not working both sides |1.1.A.3b|2
Nearside Front Suspension component mounting prescribed area is excessively corroded Chassis Rail |2.4.A.3|2
Emissions oxygen sensor obviously defective (8.2.1.1 (a))2
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL (5.3.6 (a) (i))2
Offside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))2
Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))2
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f|2
Offside Rear fog lamp adversely affected by the operation of another lamp |1.3.2f|2
Driver`s seat insecure |6.2.5 |a| |ii||2
Nearside Front Anti-roll bar attachment bracket/mounting insecure and impairing directional stability |5.3.3 |a| |ii||2
Braking system leaking front to rear pipe |3.6.A.1|2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS |5.3.6 |a| |i||2
Offside Front Anti-roll bar attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1|2
Nearside Seat belt anchorage prescribed area is excessively corroded floor to sill |5.2.6|2
Nearside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))2
Nearside Front Body has a projection caused by damage |6.1.C.1|2
Offside Rear brake disc contaminated by oil |3.5.1h|2
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan (5.3.6 (a) (i))2
Nearside Inner Rear brake disc excessively scored |3.5.1h|2
Offside Inner Rear brake disc excessively scored |3.5.1h|2
Nearside Front Headlamp not working on main beam |4.1.1 |a| |ii||2
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced rear outer sill |7.1.1 |a| |i||2
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear outer sill |7.1.1 |a| |i||2
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))2
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill area (5.3.6 (a) (i))2
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis member (6.1.1 (c) (i))2
Nearside Front Steering system lock to lock check twists a brake hose |2.2.D.2b|2
Nearside Rear Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))2
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|2
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii))2
Nearside Rear Anti-roll bar linkage missing (5.3.3 (a) (ii))2
Offside Front Suspension component mounting prescribed area is inadequately repaired chassis rail (5.3.6 (a) (i))2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg near anti roll bar mount (5.3.6 (a) (i))2
Front Headlamp light source and lamp not compatible (4.1.4 (c))2
Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))2
Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar |2.4.A.3|2
Brake pedal anti-slip provision worn smooth |1.1.2 |c||2
Nearside Front Seat belt stitching badly frayed |5.2.2b|2
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner & outer sill |5.2.6|2
Offside Front Lower Body panel corroded and likely to cause injury wing (6.2.1 (a) (i))2
Offside Rear Inner Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii))2
Offside Front Side repeater missing (4.4.1 (a) (ii))2
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL (5.3.6 (a) (i))2
Offside All direction indicators not working (4.4.1 (a) (ii))2
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))2
Offside Front Side repeater missing |1.4.A.2b|2
Offside Rear Brake cable has restricted free movement (1.1.15 (e))2
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))2
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))2
Offside Seat belt anchorage prescribed area is inadequately repaired outer sill (7.1.1 (a) (i))2
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail (5.3.6 (a) (i))2
Offside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii))2
Nearside Front Suspension component mounting prescribed area is excessively corroded anti roll bar |2.4.A.3|2
Nearside Front Anti-roll bar attachment bracket/mounting fractured |5.3.3 |b| |ii||2
Offside Rear Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))2
Offside Front Anti-roll bar attachment bracket/mounting insecure (5.3.3 (a) (i))2
Offside Rear Road wheel more than one fixing loose (5.2.1 (a) (ii))2
Nearside Rear brake disc modified and seriously weakened |3.5.1n|2
Offside Stop lamp(s) all not working (4.3.1 (a) (iii))2
Nearside Front Road wheel badly damaged |4.2.A.1a|2
Nearside Front Power steering pipe/hose leaking (2.1.5 (a))2
Nearside Front Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement |2.4.G.2|2
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor pan |6.2.2 |d| |i||2
Offside Rear Suspension component mounting prescribed area is excessively corroded inner arches |2.4.A.3|2
Offside Front Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6|2
Offside Rear Seat belt anchorage prescribed area is fractured |5.2.6|2
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))2
Offside Front Side repeater incorrect colour |1.4.A.2f|2
Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))2
Offside Front Anti-roll bar ball joint likely to become detached |5.3.4 |a| |ii||2
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan (7.1.1 (a) (i))2
Nearside Front Tie bar/rod insecure |2.4.G.1|2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/sill (5.3.6 (a) (i))2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch (5.3.6 (a) (i))2
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced boot floor (6.1.1 (c) (i))2
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i))2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor as marked (5.3.6 (a) (i))2
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||2
Offside Rear Brake hose twisted |3.6.B.4c|2
Offside Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan |5.3.6 |a| |i||2
Offside Front Service brake has no recorded effort at a wheel (1.2.1 (a) (ii))2
Rear fog lamp missing |1.3.2a|2
Nearside Side repeater missing (4.4.1 (a) (ii))2
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch area (7.1.1 (a) (i))2
Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||2
Nearside Front Headlamp not in good working order |not working| |1.2.4a|2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch (5.3.6 (a) (i))2
Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Nearside Rear Lower Suspension arm pin or bush excessively worn front (5.3.4 (a) (i))2
Offside Rear Lower Suspension arm pin or bush excessively worn front (5.3.4 (a) (i))2
Nearside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen |3.5 |a||2
Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b))2
Nearside Front Lower Suspension arm ball joint likely to become detached |5.3.4 |a| |ii||2
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i||2
All position lamps not working |1.1.A.3b|2
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill panel |5.2.6|2
Rear Upper Stop lamp not working |1.2.1b|2
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))2
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill area |2.4.A.3|2
Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i||2
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill (6.2.2 (d) (i))2
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill |6.2.2 |d| |i||2
Nearside Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii))2
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor |7.1.1 |a| |i||2
Nearside Front Steering locking device missing (2.1.3 (d))2
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i))2
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))2
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))2
Offside Front Upper Suspension arm ball joint likely to become detached (5.3.4 (a) (ii))2
Nearside Headlamp light source and lamp not compatible |4.1.4 |c||2
Offside Headlamp light source and lamp not compatible |4.1.4 |c||2
Offside Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i))2
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch (6.2.2 (d) (i))2
Nearside Front Sub-frame corroded and seriously weakened |2.4.G.1|2
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2|2
Nearside Rear Direction indicator incorrect colour (4.4.3 (a))2
Nearside Front Front position lamp|s| not working side |1.1.A.3b|2
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))2
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced door sill |7.1.1 |a| |i||2
Nearside Rear Anti-roll bar linkage insecure and impairing directional stability |5.3.3 |a| |ii||2
Windscreen damaged and affecting the driver`s view of the road |3.2 |a| |ii||2
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))2
Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))2
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill |7.1.1 |a| |i||2
Offside Front Lower Anti-roll bar linkage insecure |2.4.G.1|2
Nearside Front Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))2
Steering wheel locking device insecure |2.1.6|2
Nearside rear brakes release unevenly |3.7.B.4|2
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced OUTER SILL (7.1.1 (a) (i))2
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))2
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||2
Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch (6.2.2 (d) (i))2
Nearside Front Body has a sharp edge caused by damage |6.1.C.1|2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under wing (5.3.6 (a) (i))2
Nearside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1|2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing |5.3.6 |a| |i||2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor |5.3.6 |a| |i||2
Nearside Front Lower Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|2
Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Offside Front Track rod end loose |2.2.B.1d|2
Front Service brake application uneven across the axle |3.7.D.2b|2
Offside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected floor (5.3.6 (a) (ii))2
Nearside Steering rack gaiter insecure |2.2.D.2d|2
Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b|2
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis section |2.4.A.3|2
Nearside Rear Suspension spring mounting prescribed area is excessively corroded boot floor |2.4.A.3|2
Windscreen in such a condition that visibility through swept area is seriously affected (3.2 (c) (ii))2
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis rail |5.3.6 |a| |ii||2
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Floor (7.1.1 (a) (i))2
Nearside Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|2
Front coil spring broken |2.4.C.1a|2
Wheel nut|s| missing |4.2.A.1e|2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top (5.3.6 (a) (i))2
Front Service brake lagging in operation |1.2.1 |d||2
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner flitch over anti roll bar (6.1.1 (c) (i))2
Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced chassis holed (6.1.1 (a) (i))2
Nearside Rear Outer Vehicle structure is fractured and structural rigidity is significantly reduced sill (6.1.1 (a) (i))2
Offside Rear Outer Vehicle structure is fractured and structural rigidity is significantly reduced sill (6.1.1 (a) (i))2
Central Rear Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))2
Central Front Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))2
Offside Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b|2
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i||2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/floor (5.3.6 (a) (i))2
Nearside Rear Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii))2
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced leg |6.1.1 |c| |i||2
coil spring broken both rear |2.4.C.1a|2
Offside Outer Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|2
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))2
Exhaust silencer insecure (8.1.1 (b) (i))2
Nearside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected inner sill (5.3.6 (a) (ii))2
Offside Front Anti-roll bar linkage insecure detached |2.4.G.1|2
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill area (7.1.1 (a) (i))2
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Wheel arch (7.1.1 (a) (i))2
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Wheel arch (7.1.1 (a) (i))2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing (5.3.6 (a) (i))2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing (5.3.6 (a) (i))2
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength undersill (5.3.6 (a) (i))2
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength undersill (5.3.6 (a) (i))2
Nearside Rear Seat belt anchorage prescribed area is excessively corroded under sill |5.2.6|2
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii||2
Offside Front coil spring cracked |2.4.C.1a|2
Offside Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|2
Nearside Rear Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3|2
Front front brake grabbing severely |3.7.A.2b|2
Nearside Rear Rear position lamp|s| incorrect colour |1.1.A.3e|2
Nearside Rear Brake performance not tested |3.7.A.1|2
Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3|2
Offside Rear Seat belt anchorage prescribed area is excessively corroded floor to sill |5.2.6|2
Offside Rear Anti-roll bar linkage cracked |2.4.G.1|2
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))2
Emissions not tested exhaust blowing (8.2.1.2 (d))2
Nearside Front Suspension component mounting prescribed area is inadequately repaired chassis |5.3.6 |a| |i||2
Exhaust emissions likely to be affected by an exhaust leak front to middle sleeve leaking (8.2.1.1 (b))2
Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))2
Offside Front Steering locking device missing (2.1.3 (d))2
Offside Rear Rear fog lamp missing (4.5.1 (a) (ii))2
Nearside Rear Inner Subframe mounting prescribed area is excessively corroded sill |2.4.A.3|2
Offside Rear fog lamp missing (4.5.1 (a) (ii))2
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt split (2.1.3 (g) (ii))2
Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg/inner wheel arch |2.4.A.3|2
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))2
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer and inner sill |5.2.6|2
Offside Front Inner Suspension component mounting prescribed area is excessively corroded arch |2.4.A.3|2
Steering wheel has movement relative to the column indicating looseness (2.2.1 (a) (i))2
Offside Front Coil spring corroded so that its cross sectional area is reduced and seriously weakened (5.3.1 (b) (i))2
Rear Battery insecure and likely to cause a short circuit (4.13 (a) (ii))2
Rear Parking brake inoperative on one side X2 |1.4.1 |a||2
Nearside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|2
Nearside Front Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c|2
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|2
Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded wing |2.4.A.3|2
Offside Front Inner Suspension spring mounting prescribed area is excessively corroded wing |2.4.A.3|2
Exhaust emissions likely to be affected by an induction leak (8.2.1.1 (b))2
Nearside Rear Brake pipe at imminent risk of failure or fracture (1.1.11 (a))2
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mount (5.3.6 (a) (i))2
Exhaust fumes entering cabin |6.1.2 |b| |i||2
Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|2
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis (5.3.6 (a) (i))2
Offside Rear Anti-roll bar linkage missing (5.3.3 (a) (ii))2
Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||2
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill corroded (7.1.1 (a) (i))2
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch at rear of sill |6.1.B.2|2
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i||2
Nearside Front Upper Suspension arm corroded and seriously weakened |5.3.3 |b| |i||2
Offside Front Upper Suspension arm corroded and seriously weakened |5.3.3 |b| |i||2
Nearside Front Shock absorbers has an excessively worn bush |5.3.2 |c||2
Nearside Stop lamp not working |1.2.1b|1
Offside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a|1
Offside Steering rack gaiter split |2.2.D.2d|1
Brake performance not tested |3.7.A.1|1
Service brake: efficiency below requirements |3.7.B.7|1
Nearside Side repeater not working |1.4.A.2c|1
Rear Emissions not tested |7.0|1
Offside Rear Brake performance not tested |3.7.A.1|1
Rear Exhaust has a major leak of exhaust gases |7.1.2|1
Nearside Steering rack gaiter split |2.2.D.2d|1
Service brake: efficiency below requirements |3.7.C.1a|1
Parking brake: efficiency below requirements |3.7.C.1b|1
Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i||1
Battery insecure |1.9.1|1
Nearside Headlamp insecure |1.7.3|1
Centre Stop lamp not working |1.2.1b|1
Nearside Headlamp aim headlamp not in good working order adversely affecting beam image |1.2.4b|1
Offside Headlamp aim headlamp not in good working order adversely affecting beam image |1.2.4b|1
Rear Exhaust system insecure (6.1.2 (a))1
Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))1
Nearside Seat belt retracting mechanism defective (7.1.2 (e))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner & Outer sills (5.3.6 (a) (i))1
Rear Exhaust has a major leak of exhaust gases silencer (6.1.2 (a))1
Nearside Rear Shock absorbers has a serious fluid leak1
Rear fog lamp lens defective such that emitted light is adversely affected shows white (4.5.1 (b) (ii))1
Nearside Front Suspension arm ball joint excessively worn lower (5.3.4 (a) (i))1
Nearside Headlamp light intensity severely reduced bulb dim. (4.1.4 (a))1
Offside Rear fog lamp does not emit a steady red light (4.5.4 (a))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))1
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))1
Nearside Front Upper Steering locking device missing Ball joint (2.1.3 (d))1
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))1
Power steering pipe(s) or hose(s) leaking (2.3.3b)1
Nearside Front position lamp(s) not working (1.1.A.3b)1
Offside Rear coil spring broken (2.4.C.1a)1
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i))1
Battery insecure and likely to fall from carrier (4.13 (a) (ii))1
Rear fog lamp missing (4.5.1 (a) (ii))1
Nearside Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))1
Emissions not tested Due to cooling system faults (8.2.1.2 (d))1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Both sides inner sill (6.2.2 (d) (i))1
Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))1
Offside Rear Seat belt anchorage likely to become detached in the event of a collision outer sill (7.1.1 (a) (ii))1
Offside Rear Rear fog lamp missing (4.5.1 (a) (ii))1
Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))1
Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength boot floor under battery (5.3.6 (a) (i))1
Nearside Front Lower Suspension component ball joint excessively worn loose (5.3.4 (a) (i))1
Front Position lamp not working side lights (4.2.1 (a) (ii))1
Steering rack has excessive free play detected at the steering wheel to the extent that safe steering is affected (steering rack fitted) (2.3 (a) (ii))1
Nearside Front Steering arm modified such that the steering is adversely affected inner rack joint broken. (2.1.3 (f) (ii))1
Central Rear Stop lamp(s) not working (4.3.1 (a) (ii))1
Power steering component leaking Power Steering Rack (2.1.5 (a))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))1
Rear Hydraulic brake calliper insecurely mounted both side (1.1.16 (c) (i))1
Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps (4.1.3 (b))1
Nearside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))1
Nearside Rear Hydraulic brake calliper insecurely mounted and braking performance affected (1.1.16 (c) (ii))1
Offside Front Hydraulic brake calliper insecurely mounted and braking performance affected (1.1.16 (c) (ii))1
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))1
Offside Rear fog lamp not working (1.3.2b)1
Nearside Windscreen wiper blade deteriorated (8.2.2)1
Offside Windscreen wiper blade deteriorated (8.2.2)1
Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering floor to sill (6.1.1 (c) (ii))1
Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill under car (6.1.1 (c) (ii))1
Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill under car (6.1.1 (c) (ii))1
Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch holed (6.1.1 (c) (ii))1
Rear Service brake imbalanced across an axle (1.2.1 (b) (i))1
Emissions not tested (8.2.1.2 (d))1
Offside Rear Coil spring corroded so that its cross sectional area is reduced and seriously weakened (5.3.1 (b) (i))1
Nearside Rear Coil spring corroded so that its cross sectional area is reduced and seriously weakened (5.3.1 (b) (i))1
Exhaust emissions exceed manufacturers specified limit (8.2.2.2 (a))1
Drivers door cannot be opened from outside the vehicle (6.2.3 (a))1
Front Hydraulic fluid leaking continuously posing a serious risk to road safety Power steering (8.4.1 (a) (ii))1
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))1
Offside Rear Direction indicator incorrect colour (4.4.3 (a))1
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))1
Headlamp aim not tested (4.1.2 (b))1
Nearside Front Electrical wiring likely to touch hot or rotating parts above air mass sensor (4.11 (a) (iii))1
Offside Rear Direction indicator not working (4.4.1 (a) (ii))1
Offside Front Side repeater not working (4.4.1 (a) (ii))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))1
Front passenger door cannot be opened from inside the vehicle (6.2.3 (a))1
Front passenger door cannot be opened from outside the vehicle (6.2.3 (a))1
Front Power steering inoperative and steering adversely affected (2.1.5 (c) (ii))1
Rear Electrical wiring likely to drag on the ground Aftermarket Underbody Lights - Wiring is Loose, Poorly Fitted and Hanging Below Vehicle (4.11 (a) (iii))1
Exhaust system insecure Not Attached at Both Rear Exhaust Rubbers (6.1.2 (a))1
Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))1
Central Front Oil leaking excessively from transmission (8.4.1 (a) (i))1
Central Front Oil leaking excessively from engine (8.4.1 (a) (i))1
Rear Service brake efficiency below requirements Rear Service Brake has Low Effort and Brakes Dont Lock Out (1.2.2 (a) (i))1
Front Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction Christmas Lights Wrapped Around Front Windscreen (3.1 (a) (ii))1
Power steering malfunctioning (2.1.5 (a))1
Offside Front Brake hose excessively damaged (1.1.12 (b) (ii))1
Offside Front Macpherson strut pin or bush excessively worn (5.3.4 (a) (i))1
Nearside Rear Shock absorbers damaged to the extent that it does not function (5.3.2 (b))1
Rear fog lamp does not emit a steady red light (4.5.4 (a))1
Electrical wiring insecure and connectors likely to become disconnected wiring above brake pedals (4.11 (a) (ii))1
All position lamps not working (1.1.A.3b)1
Horn control missing (1.6.1)1
Main beam tell-tale not working (1.7.4c)1
Offside Stop lamp not working (1.2.1b)1
Stop lamp(s) all not working (4.3.1 (a) (iii))1
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))1
Central Stop lamp(s) not working (4.3.1 (a) (ii))1
Nearside Front Service brake excessively fluctuating (1.2.1 (e))1
Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt both sides (5.3.4 (b) (ii))1
Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i))1
Front Position lamp not working (4.2.1 (a) (ii))1
All direction indicators not working (4.4.1 (a) (ii))1
Central Exhaust system insecure (6.1.2 (a))1
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)1
Centre Stop lamp not working (1.2.1b)1
Rear fog lamp switch inoperative (4.5.3 (a))1
Exhaust emissions carbon monoxide content excessive engine misfiring (8.2.1.2 (b))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Rear Service brake effort inadequate at a wheel O/S and N/S (1.2.1 (a) (i))1
Coil spring fractured or broken (5.3.1 (b) (i))1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))1
Offside Front Outer Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))1
Exhaust emissions carbon monoxide content excessive CO 4.086% (8.2.1.2 (b))1
Offside Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii))1
Central Rear Rear fog lamp not working (4.5.1 (a) (ii))1
Offside Rear Shock absorbers has negligible damping effect (5.3.2 (d))1
Offside Rear Shock absorbers has a serious fluid leak1
Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)1
Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)1
Seat belt insecurely fixed to the vehicles structure both rear belt mounting points (5.2.1a)1
Seat belt installation has an anchorage without suitable reinforcement rear mounting points (5.3.1f)1
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)1
Nearside Front Direction indicators incorrect colour (1.4.A.2f)1
Offside Front Direction indicators incorrect colour (1.4.A.2f)1
Offside Headlamp not working on dipped beam (1.7.5a)1
Nearside front brake binding (3.7.B.1)1
Power steering component leaking rack leaking (2.1.5 (a))1
Offside Rear fog lamp missing (4.5.1 (a) (ii))1
Rear fog lamp tell-tale missing (4.9.1 (a) (ii))1
Nearside Front Direction indicator incorrect colour (4.4.3 (a))1
Offside Front Direction indicator incorrect colour (4.4.3 (a))1
Power steering inoperative (2.1.5 (c) (i))1
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))1
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))1
Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))1
Rear fog lamp light intensity significantly reduced (4.5.4 (a))1
Front Position lamp adversely affected by the operation of another lamp (4.2.3 (c))1
Nearside Rear Service brake excessively binding (1.2.1 (f))1
Offside Rear Service brake excessively binding (1.2.1 (f))1
Offside Front Anti-roll bar linkage pin or bush excessively worn bolt loose (5.3.4 (a) (i))1
Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))1
Nearside Rear Service brake lagging in operation (1.2.1 (d))1
Offside Front Body panel insecure wing (6.2.1 (a) (i))1
Offside Vehicle structure inadequately repaired such that structural rigidity is significantly reduced Chassis rail inadequate repair (6.1.1 (d) (i))1
Rear fog lamp switch not operating in accordance with the requirements No tell tale indicating if lamp switched on (4.5.3 (a))1
Front Exhaust has a major leak of exhaust gases Manifold area (6.1.2 (a))1
Front Shock absorbers damaged to the extent that it does not function Both sides (5.3.2 (b))1
Rear Shock absorbers damaged to the extent that it does not function Both sides (5.3.2 (b))1
Front Coil spring corroded so that its cross sectional area is reduced and seriously weakened Both sides (5.3.1 (b) (i))1
Rear Coil spring corroded so that its cross sectional area is reduced and seriously weakened Both sides (5.3.1 (b) (i))1
Drivers airbag missing (7.1.5 (a))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor pan (5.3.6 (a) (i))1
Power steering component leaking steering rack (2.1.5 (a))1
Front Body panel insecure (6.2.1 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill & sill end (5.3.6 (a) (i))1
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))1
Central Rear fog lamp not working (4.5.1 (a) (ii))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))1
Nearside Front Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))1
Nearside Rear Upper Suspension arm pin or bush excessively worn inner and outer bushes (5.3.4 (a) (i))1
Offside Rear Upper Suspension arm pin or bush excessively worn inner and outer bushes (5.3.4 (a) (i))1
Offside Side repeater incorrect colour (4.4.3 (a))1
Nearside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i))1
Offside Rear fog lamp lens defective such that emitted light is adversely affected SHOWING WHITE LIGHT. (4.5.1 (b) (ii))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/floor (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength backing sill area (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/sill several places as marked (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))1
Power steering pipe/hose leaking (2.1.5 (a))1
Nearside Front Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt Inner rack arm Boot (2.1.3 (g) (ii))1
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)1
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)1
Rear Exhaust has a major leak of exhaust gases (7.1.2)1
Offside Rear Shock absorber has a serious fluid leak (2.7.3)1
Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)1
Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)1
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)1
Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)1
Offside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)1
Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)1
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)1
Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)1
Centre Rear Stop lamp not working (1.2.1b)1
Offside Rear fog lamp missing (1.3.2a)1
Steering rack gaiter missing or no longer prevents the ingress of dirt Both gaiters (2.1.3 (g) (ii))1
Offside Rear Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt Split (6.1.7 (g) (ii))1
Headlamp aim unable to be tested (4.1.2 (b))1
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Emissions unable to be completed (8.2.1.2 (d))1
Nearside Seat belt buckle not functioning as intended (7.1.2 (d))1
Nearside Rear Service brake excessively fluctuating (1.2.1 (e))1
Offside Rear Service brake excessively fluctuating (1.2.1 (e))1
Nearside Front Valve stem seriously damaged (5.2.3 (j))1
Rear Rear fog lamp missing (4.5.1 (a) (ii))1
Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))1
Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii))1
Nearside Front Outer Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))1
Nearside Front Direction indicator not working (4.4.1 (a) (ii))1
Rear Anti-roll bar pin or bush excessively worn "D" Bushes (5.3.4 (a) (i))1
Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt Upper arm Ball Joint (5.3.4 (b) (ii))1
Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii))1
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))1
Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))1
Nearside Obligatory mirror insecure (3.3 (b) (ii))1
Nearside Rear Anti-roll bar pin or bush excessively worn D BUSH (5.3.4 (a) (i))1
Offside Rear Anti-roll bar pin or bush excessively worn D BUSH (5.3.4 (a) (i))1
Nearside Obligatory mirror does not provide a view to the rear (3.3 (c))1
Nearside Rear Position lamp not working (4.2.1 (a) (ii))1
Nearside Headlamp light intensity severely reduced (4.1.4 (a))1
Offside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))1
Emission control equipment obviously defective (8.2.2.1 (a))1
Emissions unable to be completed carbon to high (8.2.2.2 (e))1
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))1
Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i))1
Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))1
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))1
Offside Rear Obligatory mirror does not provide a view to the rear (3.3 (c))1
Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Emissions unable to be completed exhaust leak (8.2.1.2 (d))1
Brake lever has insufficient reserve travel (1.1.2 (a))1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg split |6.1.B.2|1
Valve stem seriously damaged osf nsf nsr (5.2.3 (j))1
Offside Rear Hydraulic brake calliper leaking stains around bottom of caliper and paint bubbling on alloy wheel suspect from brake fluid (1.1.16 (b) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by anti roll bracket |5.3.6 |a| |i||1
Emissions not tested due exhaust leak |8.2.1.2 |d||1
Nearside Front Headlamp aim projected beam image is obviously incorrect Headlamp fitted incorrectly (4.1.2 (c))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill corroded and holed, By the Jacking point (6.1.1 (c) (i))1
Nearside Front Suspension component mounting prescribed area is excessively corroded FLOOR AT BOTTOM ARM |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is severely distorted CHASSIS AT ANTI-ROLL BAR MOUNTING |2.4.A.3|1
Nearside Passengers seat insecure (6.2.6 (a) (ii))1
Nearside Front Shock absorbers insecurely attached at bottom mounting (5.3.2 (a) (i))1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))1
Exhaust has a major leak of exhaust gases centre to rear joint (6.1.2 (a))1
coil spring broken NEARSIDE REAR |2.4.C.1a|1
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i||1
Offside Front Brake prescribed area is excessively corroded INNER ARCH (1.1.21 (e) (i))1
Brake pipe leaking on a hydraulic braking system o/s/f to o/s/r |1.1.11 |b| |ii||1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor/inner sill corroded within 30cm of a seat/seatbelt mounting (7.1.1 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor/inner sill corroded within 30cm of a seat/seatbelt mounting (7.1.1 (a) (i))1
Engine MIL inoperative or indicates a malfunction illuminated (8.2.1.2 (h))1
Offside Front Lower Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Suspension spring mounting prescribed area is excessively corroded N/S/R INNER ARCH HOLED - MARKED YELLOW |2.4.A.3|1
Suspension spring mounting prescribed area is excessively corroded O/S/R INNER ARCH HOLED - MARKED YELLOW |2.4.A.3|1
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings O/S/F INNER SILL / FLOOR PAN HOLED - MARKED YELLOW |6.1.B.2|1
Fuel cap/sealing device missing |6.1.3 |b| |i||1
Nearside Rear Lower Suspension arm severely distorted wish bone arm corroded |2.4.G.1|1
Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill (6.2.2 (d) (ii))1
Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill (6.2.2 (d) (ii))1
Nearside Front Power steering pipe/hose leaking steering rack pipe (2.1.5 (a))1
Rear Brake disc significantly and obviously worn excessively corroded (1.1.14 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail next to anti roll bar bracket (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength just in front of antiroll bar bracket/on chassis |5.3.6 |a| |i||1
Exhaust Lambda reading after 2nd fast idle outside specified limits 1.049 (8.2.1.2 (c))1
Nearside Front Inner Road wheel fractured (5.2.2 (a))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill (jacking point) (6.2.2 (d) (i))1
Nearside Seat belt anchorage prescribed area is excessively corroded inner sill panel |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded inner sill panel |5.2.6|1
Brake valve leaking such that brake functionality is affected (1.1.7 (d) (ii))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting end sill |6.2.2 |d| |i||1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OUTER SILL CORROSION. (6.2.2 (d) (i))1
Central Stop lamp|s| with a multiple light source more than 1/2 not functioning |4.3.1 |a| |ii||1
Suspension component mounting prescribed area is excessively corroded both rear inner sills |2.4.A.3|1
Steering system fouling undertray offside |2.2.D.2a|1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill panel (7.1.1 (a) (i))1
Centre Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b|1
Nearside Seat belt anchorage prescribed area is excessively corroded rear innersill |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded rear innersill |5.2.6|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasse rail |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasse rail |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasse rail inner wheel |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasse rail inner wheel |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill |5.3.6 |a| |i||1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail holed and corroded |6.1.1 |c| |i||1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis rail area |2.4.A.3|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg /rail (6.1.1 (c) (i))1
Nearside Headlamp not working on main beam |4.1.1 |a| |ii||1
Central Exhaust has a major leak of exhaust gases section missing (6.1.2 (a))1
Emissions not tested exhaust centre section missing (8.2.1.2 (d))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch. |5.3.6 |a| |i||1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded with in 12" of seat belt mounting point marked yellow (7.1.1 (a) (i))1
Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides (5.3.6 (a) (i))1
Nearside Upper Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Upper Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Suspension component mounting prescribed area is excessively corroded BOTH FRONT CHASSIS MEMBERS |2.4.A.3|1
Offside Rear Brake pipe leaking in mounting clip |3.6.A.1|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced cill and chassis corroded (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced cill and chassis corroded (7.1.1 (a) (i))1
Nearside Rear Vehicle structure inadequately repaired such that structural rigidity is significantly reduced cill repair patch not continuously seal welded (6.1.1 (d) (i))1
Rear Exhaust has a major leak of exhaust gases back box |7.1.2|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Sill and floor. Note: Other corrosion holes outside of prescribed area (7.1.1 (a) (i))1
Offside Front Body component likely to become detached (6.2.1 (a) (ii))1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill /floor (6.1.1 (c) (i))1
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis and floor pan (5.3.6 (a) (i))1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear inner seal rusted through (6.1.1 (c) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced upper inner arch (6.1.1 (c) (i))1
Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced chassis leg (6.1.1 (a) (i))1
Oil leaking continuously from engine posing a serious risk to road safety |8.4.1 |a| |ii||1
Nearside Rear Outer Suspension component mounting prescribed area fractured significantly reducing structural strength sill |5.3.6 |a| |i||1
Central Rear Inner Suspension component mounting prescribed area fractured significantly reducing structural strength sill |5.3.6 |a| |i||1
Front Suspension component mounting prescribed area fractured significantly reducing structural strength o/s and n/s chassis |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength floor |5.3.6 |a| |i||1
Power steering pipe|s| or hose|s| leaking by rack area |2.3.3b|1
Nearside Rear Brake pipe inadequately supported |3.6.B.1|1
Rear Battery insecure and likely to fall from carrier BOOT FLOOR (4.13 (a) (ii))1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor pan behind offside front sill (6.2.2 (d) (i))1
Brake disc significantly and obviously worn front and rear |1.1.14 |a| |i||1
Braking system leaking nearside rear caliper |3.6.A.1|1
Suspension component mounting prescribed area is excessively corroded nearside inner sill |2.4.A.3|1
Suspension component mounting prescribed area is excessively corroded offside outer sill |2.4.A.3|1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill. |7.1.1 |a| |i||1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill. |7.1.1 |a| |i||1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill. |5.3.6 |a| |i||1
Emissions not tested c/o out of specified limits (8.2.1.2 (d))1
Nearside Rear Brake pipe leaking on a hydraulic braking system to flexi hose (1.1.11 (b) (ii))1
Exhaust has a major leak of exhaust gases front and rear pipe sections (6.1.2 (a))1
Nearside Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill - multiple areas (6.2.2 (d) (i))1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor (6.2.2 (d) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced boot floor to wing in multiple areas (6.1.1 (c) (i))1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch to chassis (6.1.1 (c) (i))1
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch to chassis (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near anti roll bar mounting (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near anti roll bar mount and front axle mount (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front floors and offside chassis (5.3.6 (a) (i))1
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced anti roll bar attachments (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in arch |5.3.6 |a| |i||1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corroded behind wheel arch |6.1.1 |c| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner / outer sill (7.1.1 (a) (i))1
Nearside Inner Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c|1
Offside Inner Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c|1
Nearside Power steering component fouling and steering adversely affected (2.1.5 (e) (ii))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL, MARKED IN YELLOW. |5.3.6 |a| |i||1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL, MARKED IN YELLOW. |5.3.6 |a| |i||1
Nearside Seat belt anchorage prescribed area is excessively corroded inner sill/ floor at rear |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded inner sill/ floor at rear |5.2.6|1
Offside Front Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
front brake binding x2 |3.7.B.1|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger (6.1.1 (c) (i))1
Offside Front Lower Suspension arm corroded and seriously weakened wishbone (5.3.3 (b) (i))1
Nearside Rear Floor excessively deteriorated boot floor (6.2.4 (a) (i))1
Nearside Rear Integral body structure is deformed and structural rigidity is significantly reduced inner arches (6.1.1 (a) (i))1
Offside Rear Integral body structure is deformed and structural rigidity is significantly reduced inner arches (6.1.1 (a) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Behind the sill beside the drainage pipe. |6.1.1 |c| |i||1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded under front wing. (6.1.1 (c) (i))1
Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))1
Brake pipe connection leaking on a hydraulic braking system abs pump |1.1.11 |b| |ii||1
Central Braking system leaking front to rear brake pipe burst on test |3.6.A.1|1
Rear Fuel system component leaking excessively or a risk of fire |6.1.3 |b| |ii||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg near anti roll bar mount (5.3.6 (a) (i))1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch |6.1.1 |c| |ii||1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch |6.1.1 |c| |ii||1
Offside Front Position lamp light intensity significantly reduced LED bulb flashing (4.2.3 (a) (ii))1
Offside Front Seat belt not functioning as intended (7.1.2 (c))1
Central Exhaust emissions likely to be affected by an exhaust leak Centre exhaust section holed and leaking (8.2.1.1 (b))1
Offside Seat belt anchorage prescribed area is inadequately repaired Floor to sill seat belt anchor prescribed area has a hole (7.1.1 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Floor to sill seat belt anchor prescribed area holed and corroded (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor holed (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor holed (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wing / chassis |5.3.6 |a| |ii||1
Seat belt anchorage prescribed area strength or continuity significantly reduced o/s floor rusted (7.1.1 (a) (i))1
Exhaust emissions likely to be affected by an exhaust leak middle / rear ex joint section corroded to excess / split blowing (8.2.1.1 (b))1
Exhaust Lambda reading after 2nd fast idle outside specified limits lambda reading incorrect poss due to exhaust blowing (8.2.1.2 (c))1
Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt both n/s and o/s (5.3.4 (b) (ii))1
Offside Front Seat belt anchorage prescribed area is excessively corroded floor corroded |5.2.6|1
Offside Front Brake fluid significantly below minimum mark |1.1.10 |d| |ii||1
Nearside Rear Exhaust emissions likely to be affected by an exhaust leak |8.2.1.1 |b||1
Rear Direction indicator incorrect colour BOTH SIDES |4.4.3 |a||1
Exhaust has a major leak of exhaust gases centre/rear joint |7.1.2|1
Offside Front Suspension component mounting prescribed area is excessively corroded out rigger |2.4.A.3|1
Offside Rear Brake pipe seriously damaged |found during steering lock to lock check| front to rear |2.2.D.2b|1
Offside Front Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Sill (5.3.6 (a) (i))1
Offside Front Seat belt locking mechanism does not secure or release did not release underload |5.2.5a|1
Offside Front Brake prescribed area is excessively corroded floor to sill (1.1.21 (e) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill / inner wheel arch (5.3.6 (a) (i))1
Exhaust Lambda reading after 2nd fast idle outside specified limits rear exhaust system blowing (8.2.1.2 (c))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced within 30 cm of anti roll bar mounting (6.1.1 (c) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength FRONT CHASSIS SECTION . |5.3.6 |a| |i||1
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Nearside Rear Brake pipe connection leaking on a hydraulic braking system (1.1.11 (b) (ii))1
Nearside Front Lower Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))1
Offside Front Lower Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))1
Offside Rear Brake lever has restricted free movement (1.1.15 (e))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i||1
Nearside Rear Body has a sharp edge caused by corrosion sill / wheel arch |6.1.C.1|1
Offside Front brake caliper securing device missing bolt broken off |3.5.1j|1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis corroded (6.1.1 (c) (i))1
Nearside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outer sill hold and corroded (5.3.6 (a) (ii))1
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outer sill hold and corroded (5.3.6 (a) (ii))1
Offside Rear Seat belt anchorage prescribed area is inadequately repaired incomplete weld to inner arch (7.1.1 (a) (i))1
Offside Headlamp light intensity severely reduced lens hazy (4.1.4 (a))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at anti-roll bar [D bush] mounting (5.3.6 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced AND OUTER SILLS (7.1.1 (a) (i))1
Emissions not tested vehicle ran out of fuel (8.2.1.2 (d))1
Brake performance not tested no fuel (1.2.1 (g))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner/outer sill to floor area (6.1.1 (c) (i))1
Nearside Rear Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced around anti roll bar mounting (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced around anti roll bar mounting (6.1.1 (c) (i))1
Offside Rear Upper Brake pipe at imminent risk of failure or fracture Above flexi hose (1.1.11 (a))1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings FLOOR |6.1.B.2|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SIDE AND BOTTOM |6.1.B.2|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ON BOTTOM |6.1.B.2|1
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill ) Marked yellow (6.1.1 (c) (i))1
Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill ) Marked yellow (6.1.1 (c) (i))1
Offside Front Suspension arm ball joint likely to become detached marked yellow (5.3.4 (a) (ii))1
Nearside Rear Vehicle structure has a modification which adversely affects braking or steering under car sill/floor as marked |6.1.A.1|1
Offside Rear Vehicle structure has a modification which adversely affects braking or steering under car sill/floor as marked |6.1.A.1|1
Offside Front Vehicle structure has a modification which adversely affects braking or steering floor/under car sill/outrigger as marked |6.1.A.1|1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting offside rear inner arch holed (6.2.2 (d) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail badly corroded. |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail badly corroded. |5.3.6 |a| |i||1
Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected both front chassis holed and corroded near front antiroll bar link mountings |5.3.6 |a| |ii||1
Seat belt anchorage prescribed area strength or continuity significantly reduced both rear outer sills holed and corroded |7.1.1 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/ floor (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill floor (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill marked yellow |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill marked yellow |2.4.A.3|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER ARCH FRONT CHASSIS |6.1.1 |c| |i||1
Nearside Rear Hydraulic fluid leaking excessively brakes |8.4.1 |a| |i||1
Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering Mid section |6.1.1 |c| |ii||1
Offside Vehicle structure has excessive corrosion which adversely affects braking or steering Mid section |6.1.1 |c| |ii||1
Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Floor |6.2.2 |d| |ii||1
Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Floor |6.2.2 |d| |ii||1
Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Floor |6.2.2 |d| |ii||1
Emissions not tested Low fuel/stalling |8.2.1.2 |d||1
Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced Floor pan corroded. (6.1.1 (a) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced O/S/R Inner seal panel corroded (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced O/S/R Boot Pan Corroded (6.1.1 (c) (i))1
Nearside Front Brake hose connection leaking on a hydraulic braking system leaking at caliper junction (1.1.12 (c) (ii))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor area (6.1.1 (c) (i))1
Offside Rear Lower Suspension arm has an unsafe modification (5.3.3 (c) (i))1
Rear Exhaust has a major leak of exhaust gases Centre to rear flange (6.1.2 (a))1
Offside Rear Lower Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill and floor corroded front to rear (6.1.1 (c) (i))1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill corroded front to rear (6.1.1 (c) (i))1
Rear Exhaust emissions likely to be affected by an exhaust leak back box (8.2.1.1 (b))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis near sub frame and anti roll bar mountings |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis near sub frame and antiroll bar mounting |5.3.6 |a| |i||1
Offside Rear Inner Subframe mounting prescribed area is excessively corroded |2.4.A.3|1
Rear Exhaust emissions likely to be affected by an exhaust leak and middle (8.2.1.1 (b))1
Exhaust has a major leak of exhaust gases centre to rear join excessively corroded |7.1.2|1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch/wing |5.3.6 |a| |i||1
Nearside Headlamp aim projected beam image is obviously incorrect glass foggy no pattern (4.1.2 (c))1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch at the front of arch corroded and holed (6.1.1 (c) (i))1
Nearside Rear Stop lamp(s) light intensity significantly reduced also not visible when dipped light are on (4.3.3 (a) (ii))1
Offside Rear Stop lamp(s) light intensity significantly reduced also not visible when dipped light are on (4.3.3 (a) (ii))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor pan to sill holed (see yellow chalk) (6.1.1 (c) (i))1
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed at rear (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor pan to sill holed (6.1.1 (c) (i))1
Offside Front Braking system leaking flexible to caliper |3.6.A.1|1
Offside Front Seat belt insecurely fixed to the seat |5.2.1a|1
Nearside Front Track rod end ball joint has excessive play lock nut loose aswel (2.1.3 (b) (i))1
Offside Front Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii))1
Nearside Rear Lower Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected INNER (5.3.6 (a) (ii))1
Nearside Rear Inner Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected ARCH (5.3.6 (a) (ii))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Sill Inner And Outer |5.2.6|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inside and outside sill |7.1.1 |a| |i||1
Offside Front Suspension component mounting prescribed area is excessively corroded out rigger /floor |2.4.A.3|1
Nearside Seat belt anchorage prescribed area is excessively corroded body sill panel adjacent to |5.2.6|1
Offside Front Suspension component mounting prescribed area is excessively corroded main chassis adjacent to |2.4.A.3|1
Exhaust has a major leak of exhaust gases rear pipe (6.1.2 (a))1
Emissions not tested because of exhaust blowing (8.2.1.2 (d))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at anti roll bar mount (5.3.6 (a) (i))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer sill corroded@rear (7.1.1 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer sill@rear (7.1.1 (a) (i))1
Centre Rear Stop lamp not working High level |1.2.1b|1
Nearside Rear Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch (6.2.2 (d) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill riser (6.2.2 (d) (i))1
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill riser (6.2.2 (d) (i))1
Nearside Front Anti-roll bar insecurely attached |5.3.3 |a| |i||1
Nearside Rear Lower Suspension arm pin or bush excessively worn Excessive movement (5.3.4 (a) (i))1
Offside Rear Lower Suspension arm pin or bush excessively worn Execesive movement (5.3.4 (a) (i))1
Exhaust has a major leak of exhaust gases rear flange corroded (6.1.2 (a))1
Rear Service brake excessively fluctuating discs (1.2.1 (e))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced OUTER SILL AREA. |6.1.1 |c| |i||1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg corroded (6.1.1 (c) (i))1
Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt both rear |2.4.G.2|1
Nearside Upper Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Front position lamp|s| not working sidelight |1.1.A.3b|1
Direction indicators adversely affected by the operation of another lamp ALL FOUR FLASHING WITH ALARM UNIT AT TIME OF TEST |1.4.A.2h|1
Emissions not tested major exhaust blow (8.2.1.2 (d))1
Undertray likely to become detached insecure (6.2.1 (a) (ii))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill holed and corroded (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in wheel arch (5.3.6 (a) (i))1
Nearside Front Anti-roll bar attachment bracket/mounting insecure (5.3.3 (a) (i))1
Offside Front Anti-roll bar attachment bracket/mounting fractured |5.3.3 |b| |ii||1
Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing |5.3.6 |a| |i||1
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member and boot floor |5.3.6 |a| |i||1
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3|1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed/loose (7.1.1 (a) (i))1
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to sill (6.1.1 (c) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength end of sill and inner arch (5.3.6 (a) (i))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength end of sill and inner arch (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill and wheel arch (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill and wheel arch (7.1.1 (a) (i))1
Nearside Rear Hydraulic brake calliper leaking area (1.1.16 (b) (i))1
Nearside Front Service brake indicates brake judder |3.7.D.1|1
Offside Front Service brake indicates brake judder |3.7.D.1|1
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill (6.2.2 (d) (i))1
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill (6.2.2 (d) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing / wheel arch (5.3.6 (a) (i))1
Offside Headlamp not working on dipped beam HB4 Bulb (4.1.1 (a) (ii))1
Obligatory mirror seriously damaged, affecting the rear view sharp edges caused by damage |3.3 |b| |ii||1
Exhaust has a major leak of exhaust gases center pipe |6.1.2 |a||1
Offside Front Suspension component mounting prescribed area is excessively corroded Anti-roll bar mounting |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis @ anti/roll bar bracket (5.3.6 (a) (i))1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chasis rail |6.1.B.2|1
Nearside Rear Road wheel fractured (5.2.2 (a))1
Nearside Front Headlamp missing |1.7.3|1
Front Direction indicator not working both |1.4.A.2c|1
Rear Brake disc significantly and obviously worn n/s & o/s (1.1.14 (a) (i))1
Steering system excessively rough (2.1.1 (a))1
Nearside Front Inner Integral body structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii))1
Offside Front Inner Integral body structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor (5.3.6 (a) (i))1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor (5.3.6 (a) (i))1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor (5.3.6 (a) (i))1
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill at rear |6.1.B.2|1
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both rear outer sill (6.1.1 (c) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill/wheel arch (6.1.1 (c) (i))1
Central Front Horn not working (7.7 (a) (ii))1
Nearside Rear Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))1
Rear Anti-roll bar attachment bracket/mounting insecure (5.3.3 (a) (i))1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor/inner sill (5.3.6 (a) (i))1
Rear Brake pipe leaking on a hydraulic braking system front to rear brake pipe leaking at rear in plastic retaining clip (1.1.11 (b) (ii))1
Offside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2|1
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside and offside sills |6.1.B.2|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill, floorpan, inner wing area (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill, inner wing area (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill corroded and inadequately repaired |5.2.6|1
Undertray likely to become detached Front (8.1.1 (b) (ii))1
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill To Floor (6.1.1 (c) (i))1
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt arm |2.4.G.2|1
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt arm |2.4.G.2|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill, sill end and lower inner sill (7.1.1 (a) (i))1
Suspension arm ball joint dust cover no longer prevents the ingress of dirt both front lower (5.3.4 (b) (ii))1
Offside Rear Seat belt anchorage prescribed area is inadequately repaired lower sill edge not welded (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired lower sill edge not welded (7.1.1 (a) (i))1
Exhaust Lambda reading after 2nd fast idle outside specified limits too high (8.2.1.2 (c))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Sill through to Sill end plate (6.1.1 (c) (i))1
Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Rear inner sill heavily corroded near the belt mounting (7.1.1 (a) (i))1
Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Arch |6.1.B.2|1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing corroded & holed ( engine bay) (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing corroded & holed (engine bay) (5.3.6 (a) (i))1
Offside Front Lower Shock absorbers likely to become detached lower bracket to wishbone corroded & holed - missing (5.3.2 (a) (ii))1
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded & holed (7.1.1 (a) (i))1
Offside Rear Sub-frame attachment bracket/mounting likely to become detached rear subframe mounting bracket corroded (5.3.3 (a) (ii))1
Offside Rear Drive shaft likely to become detached (6.1.7 (a) (ii))1
Offside Rear Suspension arm corroded and seriously weakened 2 x holes (5.3.3 (b) (i))1
Offside Front Position lamp missing |4.2.1 |a||1
Front position lamp|s| not working both front sidelamps not working |1.1.A.3b|1
Exhaust has a major leak of exhaust gases Modified exhaust system leaks are at welded joints - cat has also been welded (6.1.2 (a))1
Exhaust emissions likely to be affected by an exhaust leak middle and rear (8.2.1.1 (b))1
Nearside Front Suspension arm attachment bracket/mounting damaged and seriously weakened Ball joint bent (5.3.3 (b) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sills area |7.1.1 |a| |i||1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill / floor area |5.3.6 |a| |i||1
Offside Front Anti-roll bar linkage likely to become detached DETACHED |5.3.3 |a| |ii||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill and backing area (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill /floor |7.1.1 |a| |i||1
Offside Front Position lamp not working 501 (4.2.1 (a) (ii))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill panel (7.1.1 (a) (i))1
Nearside Headlamp cleaning device obviously defective |1.7.2|1
Offside Headlamp cleaning device obviously defective |1.7.2|1
Nearside Headlamp levelling device obviously defective |1.7.2|1
Offside Headlamp levelling device obviously defective |1.7.2|1
Offside Front Suspension component mounting prescribed area is excessively corroded inner wing by suspension mount |2.4.A.3|1
Offside Front Suspension rod insecure and impairing directional stability STABILIZER BAR COME OFF (5.3.3 (a) (ii))1
Emissions not tested Due to major exhaust leak. (8.2.1.2 (d))1
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))1
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both sides of boot. (5.3.6 (a) (i))1
Hazard warning lamps not fitted |1.4.B.1a|1
Hazard warning tell tale not working correctly |1.4.B.1e|1
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded cill |5.2.6|1
Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear of front sub frame mounting |6.1.1 |c| |i||1
Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear of front sub frame mounting |6.1.1 |c| |i||1
Central Front Front position lamp|s| not working |1.1.A.3b|1
Seat belt anchorage prescribed area strength or continuity significantly reduced both rear inner arch (7.1.1 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner flitches (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner flitch in several places (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area is excessively corroded inner flitch |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded inner flitch |2.4.A.3|1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and rear inner sill/floor (5.3.6 (a) (i))1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and rear outer sill (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner flitch (5.3.6 (a) (i))1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near sub-frame/sill |6.1.B.2|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inside wheel arch |6.1.B.2|1
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill / inner arch holed (6.1.1 (c) (i))1
Nearside Front Lower Suspension component pin or bush excessively worn shocker bush (5.3.4 (a) (i))1
Offside Front Anti-roll bar has excessive play in a ball joint broken |2.4.G.2|1
Nearside Front Anti-roll bar has excessive play in a ball joint broken |2.4.G.2|1
Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/marked yellow |6.1.B.2|1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings boot floor |6.1.B.2|1
Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/marked yellow |6.1.B.2|1
Nearside Front Sub-frame strengthening plate or fastening insecure (6.1.1 (b) (i))1
Offside Front Sub-frame strengthening plate or fastening insecure (6.1.1 (b) (i))1
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill to floor |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill to floor |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area at rear (7.1.1 (a) (i))1
Emissions not tested sealed tail pipe cover fitted (8.2.1.2 (d))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill/arch (7.1.1 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner/outter sills (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded Outer sill |2.4.A.3|1
Offside Front Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b|1
Offside Front Power steering pipe|s| or hose|s| excessively corroded |2.3.2|1
Emissions unable to be completed Engine missfiring and running rough (8.2.1.2 (d))1
Nearside Rear Outer Subframe mounting prescribed area is excessively corroded Sill. Yellow Chalked |2.4.A.3|1
Nearside Rear Inner Subframe mounting prescribed area is excessively corroded Wheel Arch. Yellow chalked |2.4.A.3|1
Offside Rear coil spring broken Yellow Chalked |2.4.C.1a|1
Offside Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Central Front Lower Undertray likely to become detached (6.2.1 (a) (ii))1
Offside Front Inner Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Behind o/s/f wheel arch (6.2.2 (d) (ii))1
Nearside Front Body panel insecure (6.2.1 (a) (i))1
Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor of battery compartment (5.3.6 (a) (i))1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Engine compartment in front of suspension mounting point (6.2.2 (d) (i))1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Anti roll bar mounting point (6.2.2 (d) (i))1
Offside Front Inner Body component insecure wheel arch cover (6.2.1 (a) (i))1
Nearside Front Inner Body component insecure wheel arch cover (6.2.1 (a) (i))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))1
Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))1
Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill corroded |7.1.1 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill corroded |7.1.1 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg to floor pan |5.3.6 |a| |i||1
Exhaust has a major leak of exhaust gases Back box & centre exhaust |6.1.2 |a||1
Nearside Front Lower Anti-roll bar linkage corroded and seriously weakened lock nut corroded away |5.3.3 |b| |i||1
Offside Front Lower Anti-roll bar linkage corroded and seriously weakened lock nut corroded away |5.3.3 |b| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis-rail next to arm mounting |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis-rail next to arm mounting |5.3.6 |a| |i||1
Offside Front Outer Floor excessively deteriorated drivers floor pan to sill |6.2.4 |a| |i||1
Offside Front Lower Body panel insecure (6.2.1 (a) (i))1
Offside Front Lower Body panel corroded and likely to cause injury (6.2.1 (a) (i))1
Offside Front Position lamp not working Sidelight (4.2.1 (a) (ii))1
Nearside Front Position lamp not working Sidelight bulb (4.2.1 (a) (ii))1
Exhaust has a major leak of exhaust gases both joints |7.1.2|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer sill (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced INNER AND OUTER SILL (7.1.1 (a) (i))1
Central Exhaust has a major leak of exhaust gases pipe |6.1.2 |a||1
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill panal |2.4.A.3|1
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill panal |2.4.A.3|1
Rear fog lamp obviously incorrectly positioned |4.5.4 |a||1
Rear Exhaust has a major leak of exhaust gases box cracked (6.1.2 (a))1
Offside Front Service brake excessively binding also slight imbalance |1.2.1 |f||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/chassis rail (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill/floor area |5.2.6|1
Nearside Seat belt anchorage prescribed area is excessively corroded Rear outer and inner sill plus floor |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded Rear outer and inner sill plus floor |5.2.6|1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch panel |2.4.A.3|1
Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch panel |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg near a/roll bar mount |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor holed |5.3.6 |a| |i||1
Nearside Direction indicator not working |4.4.1 |a| |ii||1
Nearside Front Position lamp adversely affected by the operation of another lamp |4.2.3 |c||1
Offside Front Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|1
Nearside Front Steering component mounting prescribed area is excessively corroded chassis (2.1.2 (e) (i))1
Offside Front Steering component mounting prescribed area is excessively corroded chassis (2.1.2 (e) (i))1
Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie by antiroll bar (5.3.6 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill x3 areas (7.1.1 (a) (i))1
Nearside Front Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassie (5.3.6 (a) (i))1
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill x2areas (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi |5.3.6 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill corroded (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill corroded |7.1.1 |a| |i||1
Offside Headlamp light intensity severely reduced Lens deteriorated |4.1.4 |a||1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/floor area (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill/closing panel excessively corroded and holed (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Marked yellow (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Marked yellow (5.3.6 (a) (i))1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch/sill (5.3.6 (a) (i))1
Offside Front Brake pipe inadequately clipped |3.6.B.1|1
Nearside Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill & floor pan (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill & floor pan (6.1.1 (c) (i))1
Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings subframe |6.1.B.2|1
Nearside Front Anti-roll bar locating pin insecure d bush bracket |2.4.G.3a|1
Offside Front Anti-roll bar locating pin insecure d bush bracket |2.4.G.3a|1
Offside Front Subframe mounting prescribed area is severely distorted |2.4.A.3|1
Rear Exhaust silencer likely to become detached (8.1.1 (b) (ii))1
Nearside Front Steering rack repaired by welding |2.2.C.1e|1
Front Track rod end ball joint has excessive play |2.2.B.1f|1
Rear front brake binding |3.7.B.1|1
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both rear outer sills |6.1.1 |c| |i||1
Offside Front Anti-roll bar linkage fractured broken |2.4.G.1|1
Nearside Position lamp showing white light to the rear (4.2.3 (a) (ii))1
Offside Rear Suspension arm pin or bush excessively worn hub top bush were suspension arm mounts (5.3.4 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded Chassis near antiroll bar mount |2.4.A.3|1
Offside Seat belt anchorage prescribed area is excessively corroded Front & rear sill too floor corroded |5.2.6|1
Rear Exhaust has a major leak of exhaust gases exhaust joint corroded and leaking (6.1.2 (a))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sil (6.1.1 (c) (i))1
Nearside Suspension component mounting prescribed area is excessively corroded outer sill in several places |2.4.A.3|1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill |6.2.2 |d| |i||1
Emissions not tested exhaust system broken at rear silencer (8.2.1.2 (d))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill outer section |6.2.2 |d| |i||1
Offside Outer Seat belt anchorage prescribed area is fractured |5.2.6|1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arches (6.1.1 (c) (i))1
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arches (6.1.1 (c) (i))1
Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))1
Offside Front Inner Road wheel cracked |4.2.A.1a|1
Rear Battery insecure and likely to cause a short circuit |4.13 |a| |ii||1
Offside Front Suspension component mounting prescribed area is excessively corroded chaises rail |2.4.A.3|1
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill panel (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill panel (5.3.6 (a) (i))1
Nearside Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii))1
Nearside Rear Hydraulic fluid leaking excessively caliper |8.4.1 |a| |i||1
Offside Rear Braking system leaking metal brake pipe |3.6.A.1|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Under/innersill section (7.1.1 (a) (i))1
Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced side sill |7.1.1 |a| |i||1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced rear sill |7.1.1 |a| |i||1
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both side sill (6.1.1 (c) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/wing (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/wing (5.3.6 (a) (i))1
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid caliper (1.1.16 (b) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill underneath (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill underneath (5.3.6 (a) (i))1
Nearside Track rod end inappropriately modified |2.2.C.1e|1
Anti-roll bar linkage ball joint excessively worn both front outer and nearside rear outer |5.3.4 |a| |i||1
Nearside Front Lower Suspension rod modified so the suspension is inoperative droplink not attached (5.3.3 (c) (ii))1
Nearside Outer Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill (6.2.2 (d) (ii))1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill (6.2.2 (d) (ii))1
Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired outrigger to chassis (6.2.2 (d) (ii))1
Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired outrigger to chassis (6.2.2 (d) (ii))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end arch (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end/arch (5.3.6 (a) (i))1
Power steering pipe/hose excessively corroded Small pipe from nearside of steering rack to offside (2.1.5 (g) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill holed by corrosion |7.1.1 |a| |i||1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill holed by corrosion |7.1.1 |a| |i||1
Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis |5.3.3 |b| |i||1
Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis |5.3.3 |b| |i||1
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill/inner |5.2.6|1
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill/inner |5.2.6|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill and wheel well (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg in wheel arch next to roll bar and subframe mount holed (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg under wheel arch next to roll bar mount and subframe holed in a couple of places (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill. (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill. (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced rear inner under sill holed (7.1.1 (a) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER SILL/BODY MOUNTING (6.2.2 (d) (i))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OUTER SILL/BODY MOUNTING (6.2.2 (d) (i))1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis by anti roll bar mounting |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis by antiroll bar mounting |2.4.A.3|1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear outer sill |7.1.1 |a| |i||1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear outer sill |7.1.1 |a| |i||1
Nearside Front Shock absorbers likely to become detached (5.3.2 (a) (ii))1
Front Anti-roll bar damaged and seriously weakened (5.3.3 (b) (i))1
Nearside Front Upper Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii))1
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outer sill has a hole in it (5.3.6 (a) (i))1
Offside Front Upper Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e|1
Front passenger door does not latch securely closed |6.2.B.1a|1
Nearside Front Headlamp aim beam image obviously incorrect bulb incorrectly fitted |1.8.A.1b|1
Nearside Front Subframe mounting prescribed area is excessively corroded chassis rail corroded behind anti roll bar and in front of sub frame mounting |2.4.A.3|1
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill corroded |5.2.6|1
Nearside Front Lower Vehicle structure has excessive corrosion which adversely affects braking or steering by subframe |6.1.1 |c| |ii||1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering anti roll bar mount |6.1.1 |c| |ii||1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering anti roll bar mount |6.1.1 |c| |ii||1
Nearside Rear Valve stem seriously damaged perished and split |4.1.D.1e|1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to inner sill area by jacking point (6.1.1 (c) (i))1
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near bumper beam fixing (6.2.2 (d) (i))1
Headlamp not in good working order |not working| |1.2.4a|1
Nearside Steering arm damaged and unserviceable |2.2.C.1d|1
Offside Outer Suspension component mounting prescribed area is excessively corroded sill at rear |2.4.A.3|1
Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))1
Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))1
Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))1
Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))1
Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))1
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))1
Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|1
Nearside Front Seat belt anchorage prescribed area is excessively corroded floor to sill |5.2.6|1
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1|1
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1|1
Nearside Rear Drive shaft which forms part of the suspension coupling gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e|1
Nearside Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Offside Rear Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii||1
Nearside Rear Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))1
Nearside Rear Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1|1
Wheel nut|s| missing 2x on each wheel |4.2.A.1e|1
Offside Parking brake inoperative on one side 150*/30 |1.4.1 |a||1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |6.1.1 |c| |i||1
Nearside Front Anti-lock braking system component inappropriately repaired wiring insecure |3.4.4|1
Nearside Front Anti-roll bar attachment bracket/mounting bolt missing bolt broken on U clamp |2.4.G.1|1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced BOOT FLOOR (6.1.1 (c) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer seal excessively corroded yellow chalk (7.1.1 (a) (i))1
Front Drive belt so worn it is likely to fail belt snapped. (6.1.7 (c) (ii))1
Front Headlamp lens seriously defective both sides (4.1.1 (b) (ii))1
Offside Rear Anti-lock braking system wheel speed sensor excessively damaged (1.6 (c))1
Parking brake is not capable of being maintained in operation by direct mechanical action only n/s/r parking brake sticking |3.1.2|1
Nearside Rear Stop lamp|s| adversely affected by the operation of another lamp |4.3.3 |b||1
Front Position lamp not working both sides |4.2.1 |a||1
Exhaust has a major leak of exhaust gases Centre box |7.1.2|1
Offside Rear Exhaust system insecure REAR EXHAUST BOX |6.1.2 |a||1
Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering bumper bracket (6.1.1 (c) (ii))1
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corroded (6.2.2 (d) (i))1
Power steering component leaking Rack/pipes (2.1.5 (a))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Also near anti roll bar mounting (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded Macstrut top area |2.4.A.3|1
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded outer sill/ arch area |5.2.6|1
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|1
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded inner sill area |5.2.6|1
Offside Front Suspension component mounting prescribed area is severely distorted strut top area |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill/arch |5.2.6|1
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill holed |2.4.A.3|1
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sil (6.1.1 (c) (i))1
Brake lever has insufficient reserve travel handbrake (1.1.2 (a))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer cill holed behind wing (6.2.2 (d) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer cill holed behind wing (6.2.2 (d) (i))1
Offside Front Road wheel fixing missing wheel nut missing (5.2.1 (a) (i))1
Rear Exhaust has a major leak of exhaust gases middle pipe to back box reason for lambda fail (6.1.2 (a))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at wishbone mounting |5.3.6 |a| |i||1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Sill Holed (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor Holed Under Battery (6.1.1 (c) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sil (7.1.1 (a) (i))1
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis, anti roll bar mounting point (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis, anti roll bar mounting point (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill large hole |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill large hole |2.4.A.3|1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wheel arch and sill (6.2.2 (d) (i))1
Nearside Front Headlamp light intensity severely reduced bulb in wrong way (4.1.4 (a))1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch to inner side sill rusted and holes (6.2.2 (d) (i))1
Front Integral body structure has a fractured which is likely to adversely affect braking or steering both side front chassis rails by top suspension (6.1.1 (a) (ii))1
Front Integral body structure is so deformed it is likely to adversely affect braking or steering both sides chassis rails by brake hose (6.1.1 (a) (ii))1
Nearside Steering rack gaiter insecure gaiter hard |2.2.D.2d|1
Service brake excessively binding OFFSIDE FRONT |1.2.1 |f||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing top (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer & inner sill (7.1.1 (a) (i))1
Nearside Rear Exhaust has a major leak of exhaust gases Stud snapped on rear flange to silencer (6.1.2 (a))1
Front position lamp|s| not working o/s and n/s |1.1.A.3b|1
Nearside Front Lower Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||1
Offside Front Lower Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||1
Seat belt anchorage prescribed area strength or continuity significantly reduced nearside rear floor to outer sill (7.1.1 (a) (i))1
Seat belt anchorage prescribed area strength or continuity significantly reduced offside rear floor to outer sill (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area is inadequately repaired fibreglass repair carried out |5.3.6 |a| |i||1
Brake performance unable to be tested brake pipes corroded (1.2.1 (g))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg marked yellow (6.1.1 (c) (i))1
Nearside Rear Inner Integral body structure inadequately repaired such that structural rigidity is significantly reduced inner rear arch (6.1.1 (d) (i))1
Offside Rear Inner Integral body structure inadequately repaired such that structural rigidity is significantly reduced inner rear arch (6.1.1 (d) (i))1
Brake pipe leaking on a hydraulic braking system front to rear metal brake pipe corroded and leaking. (1.1.11 (b) (ii))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill corroded. (7.1.1 (a) (i))1
Exhaust has a major leak of exhaust gases centre and rear exhaust joint corroded and blowing. (6.1.2 (a))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded. (7.1.1 (a) (i))1
Nearside Front Anti-roll bar linkage ball joint likely to become detached link rod come apart. (5.3.4 (a) (ii))1
Nearside Front Coil spring fractured or broken coil spring broken. (5.3.1 (b) (i))1
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s and o/s front chassis legs heavily corroded. |6.1.1 |c| |i||1
Subframe mounting prescribed area excessively corroded significantly reducing structural strength n/s and o/s front chassis legs corroded. |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected strutt housing/ inner arch (5.3.6 (a) (ii))1
Offside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis rail just behind rear bush of front wishbone (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced end of sill+ inner sill (7.1.1 (a) (i))1
Offside Front Hydraulic brake calliper leaking calper leaking |1.1.16 |b| |i||1
Suspension component mounting prescribed area is excessively corroded n/s and o/s front inner wing chassis rails holed with in anti roll bar mounting points |2.4.A.3|1
Nearside Front Steering rack gaiter insecure |2.2.D.2d|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3|1
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))1
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced engine bay- Leg (6.1.1 (c) (i))1
Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))1
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill/arch (6.1.1 (c) (i))1
Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill/arch (6.1.1 (c) (i))1
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch/ leg (6.1.1 (c) (i))1
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch/leg (6.1.1 (c) (i))1
Nearside Front Seat belt installation has cut and/or reworked original webbing (10.1 (a))1
Offside Front Seat belt installation has cut and/or reworked original webbing (10.1 (a))1
Nearside Direction indicator adversely affected by the operation of another lamp (4.4.3 (b))1
Nearside Rear Hazard warning lamps inoperative (4.4.1 (e))1
Nearside Front Suspension arm has excessive play in a ball joint bottom arm |2.4.G.2|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg corroded and holed at anti roll bar mounting (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg corroded and holed at anti roll bar mounting (5.3.6 (a) (i))1
Nearside coil spring fractured |2.4.C.1a|1
Nearside Parking brake lever has no reserve travel |3.1.6b|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of chassis (5.3.6 (a) (i))1
Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))1
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt Drop link |5.3.4 |b| |ii||1
Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch at top |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded inner arch at top |2.4.A.3|1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering panel at crossmember |6.1.A.1|1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering panel at crossmember |6.1.A.1|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch at top |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch at top |2.4.A.3|1
Nearside Front Sub-frame corroded and seriously weakened at top |2.4.G.1|1
Offside Front Lower Brake pipe connection leaking on a hydraulic braking system (1.1.11 (b) (ii))1
Nearside Front Subframe mounting prescribed area is excessively corroded at jacking point |2.4.A.3|1
Exhaust has a major leak of exhaust gases manifold area |6.1.2 |a||1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chasis leg anti roll bar mount area |5.3.6 |a| |ii||1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chasis leg antiroll bar mount area |5.3.6 |a| |ii||1
Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill section |2.4.A.3|1
Offside Lower Seat belt anchorage prescribed area is excessively corroded outer |5.2.6|1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength on side and underside directly above suspension arm (5.3.6 (a) (i))1
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill at front and rear (6.1.1 (c) (i))1
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill at front (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under front wing |5.3.6 |a| |i||1
Offside Front Headlamp insecure tightened bolts |1.7.3|1
Offside Front Anti-roll bar attachment bracket/mounting insecure bolt not done up (5.3.3 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner seal (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner seal (5.3.6 (a) (i))1
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER OUTER SILL AND SILL RISER AND FLOOR TO SILL FRONT JACK POINT (6.1.1 (c) (i))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS LEG CORRODED NEAR ANTI ROLL BAR (6.1.1 (c) (i))1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER OUTER SILL AND SILL RISER AND FLOOR TO SILL (6.1.1 (c) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS LEG CORRODED NEAR ANTI ROLL BAR (6.1.1 (c) (i))1
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced O/S/F AND N/S/ F JACKING POINT FRONT FLOOR AREA (6.1.1 (c) (i))1
Suspension arm ball joint dust cover no longer prevents the ingress of dirt UPPER AND LOWER RUBBERS SPLIT AND PERISHED (5.3.4 (b) (ii))1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg under wheel arch. |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill excessively corroded |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill excessively corroded |7.1.1 |a| |i||1
Seat belt anchorage prescribed area is excessively corroded n/s./r outer sill |5.2.6|1
Subframe mounting prescribed area excessively corroded significantly reducing structural strength n/s/f chassis |5.3.6 |a| |i||1
Seat belt anchorage prescribed area strength or continuity significantly reduced o/s/r floor to sill |7.1.1 |a| |i||1
Seat belt anchorage prescribed area strength or continuity significantly reduced o/s/r outer sill bottom edge |7.1.1 |a| |i||1
Offside Front Valve stem seriously damaged split |4.1.D.1e|1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outter sill |6.2.2 |d| |i||1
Offside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Nearside Rear Outer Suspension component mounting prescribed area is fractured sill |2.4.A.3|1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner + outer sill (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner +outer sill (6.1.1 (c) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced box section (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sil |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sil |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sil |5.3.6 |a| |i||1
Brake pipe seriously damaged |found during steering lock to lock check| rear n/s to o/s |2.2.D.2b|1
Offside Outer Front Anti-roll bar linkage insecure |2.4.G.1|1
Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced O/S AND N/S OUTER CHASSIS RAILS CORRODED AND HOLED. (6.1.1 (c) (i))1
Exhaust has a major leak of exhaust gases REAR EXHAUST JOINT CORRODED AND LEAKING. (6.1.2 (a))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded wheel arch/rear of sill |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded wheel arch/rear of sill |5.2.6|1
Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mounting area |2.4.A.3|1
Nearside Rear Upper Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail. |6.1.1 |c| |i||1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill as marked. (7.1.1 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Driver footwell as marked. (7.1.1 (a) (i))1
Rear Exhaust emissions likely to be affected by an exhaust leak At rear silencer flange joint and silencer box in front of crossmember (weld cracked.) (8.2.1.1 (b))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength a/r mounting area (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength a/r mounting area (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension area (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension area (5.3.6 (a) (i))1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point marked in yellow |6.1.B.2|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point marked in yellow |6.1.B.2|1
Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Front Suspension component mounting prescribed area is excessively corroded Anti roll bar mounting |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded Anti roll bar mounting |2.4.A.3|1
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both front chassis rails holed from corrosion |6.1.1 |c| |i||1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting osr inner/outer sill (6.2.2 (d) (i))1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings osr inner sill, marked yellow |6.1.B.2|1
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength floor wing areas (5.3.6 (a) (i))1
Nearside Front Anti-roll bar attachment bracket/mounting likely to fail bolt missing/snapped (5.3.3 (b) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength forward chassis box section holed (5.3.6 (a) (i))1
Offside Steering locking device missing track rod end missing split pin (2.1.3 (d))1
Nearside Front Brake hose excessively stretched ON FULL LOCK (1.1.12 (b) (ii))1
Exhaust has a major leak of exhaust gases middle joint (6.1.2 (a))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail above roll bar mount (5.3.6 (a) (i))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills inner rear wing (7.1.1 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills inner rear wing (7.1.1 (a) (i))1
Nearside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength inner wing (5.3.6 (a) (i))1
Offside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength inner wing (5.3.6 (a) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced lower sill |6.1.1 |c| |i||1
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides |6.1.1 |c| |i||1
Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction Mascots hanging from rear view mirror |3.1 |a| |ii||1
Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Sill (5.3.6 (a) (ii))1
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))1
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch rotten (6.2.2 (d) (i))1
Nearside Power steering component|s| leaking rack area |2.3.3b|1
Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|1
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill (6.2.2 (d) (i))1
Nearside Front Lower Shock absorbers insecurely attached (5.3.2 (a) (i))1
Offside Front Lower Shock absorbers insecurely attached (5.3.2 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS,INNER WING AREA (5.3.6 (a) (i))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS RAIL CORRODED (5.3.6 (a) (i))1
Drivers airbag missing steering air bag missing (7.1.5 (a))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (in front of anti roll bar fixing) (5.3.6 (a) (i))1
Power steering pipe|s| or hose|s| excessively corroded PIPE UNDER BONNET TO RACK LEAKING |2.3.2|1
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill panel areas |5.2.6|1
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill panel areas |5.2.6|1
Nearside Rear Suspension rod likely to become detached droplink (5.3.3 (a) (ii))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch (5.3.6 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sill (7.1.1 (a) (i))1
Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i||1
Exhaust system insecure centre join not secure |6.1.2 |a||1
Rear Upper Stop lamp(s) not working (4.3.1 (a) (ii))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded and holed (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill lower edge separating, corroded underneath (7.1.1 (a) (i))1
Nearside Front brake caliper securing device excessively deteriorated |3.5.1j|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floorpan |6.1.B.2|1
Offside Rear Parking brake efficiency below requirements |1.4.2 |a| |i||1
Offside Rear Seat belt anchorage prescribed area is inadequately repaired covered in filler |7.1.1 |a| |i||1
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3|1
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill /floor (7.1.1 (a) (i))1
Headlamps matched pair are not the same colour both |1.7.6|1
Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under arch |6.1.B.2|1
Nearside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner + outer sill |2.4.A.3|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by front sub frame |6.1.B.2|1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner /outer sill (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail Anti-roll bar mount (5.3.6 (a) (i))1
Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail Anti roll bar mount prescribed area (5.3.6 (a) (i))1
Exhaust Lambda reading after 2nd fast idle outside specified limits performance exhaust & Catalyst fitted (8.2.1.2 (c))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Arch as marked (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Arch as marked (7.1.1 (a) (i))1
Anti-roll bar attachment bracket/mounting corroded and seriously weakened Front chassis both sides around mountings |5.3.3 |b| |i||1
Offside Rear Brake valve leaking such that brake functionality is affected caliper (1.1.7 (d) (ii))1
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt upper & lower dust covers |5.3.4 |b| |ii||1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside chassis rail is corroded / holed...as marked |6.1.B.2|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner and outer sill corroded |5.2.6|1
Nearside Front Anti-roll bar linkage has excessive play in a ball joint ball joint seperates |2.4.G.2|1
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill corroded (6.2.2 (d) (i))1
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill corroded (6.2.2 (d) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near suspension mounting (6.1.1 (c) (i))1
Front Brake disc significantly and obviously worn inside face |1.1.14 |a| |i||1
Nearside Front Outer Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))1
Nearside Front Headlamp aim unable to be tested (4.1.2 (b))1
Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt gator holed (2.1.3 (g) (ii))1
Front Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b|1
Nearside Rear Suspension arm corroded and seriously weakened lower arm |5.3.3 |b| |i||1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch within 30cm seat belt mounting |6.2.2 |d| |i||1
Nearside Front Suspension component mounting prescribed area is excessively corroded X3 |2.4.A.3|1
Front Exhaust has a major leak of exhaust gases joiner (6.1.2 (a))1
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor pan (6.1.1 (c) (i))1
Exhaust has a major leak of exhaust gases Rear to centre pipe joint (6.1.2 (a))1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill x 2 (7.1.1 (a) (i))1
Rear Valve stem seriously damaged Both OS and NS (5.2.3 (j))1
Brake performance not tested total brake failure. |1.2.1 |g||1
Nearside Front Brake hose leaking on a hydraulic braking system |1.1.12 |c| |ii||1
Front position lamp|s| has less than 50% of the light sources illuminating both. |1.1.A.3b|1
Nearside Front Electrical wiring insecure behind hub. |1.9.2a|1
Nearside Front Subframe mounting prescribed area is excessively corroded chassis |area of top suspension arm mount/subframe mount| |2.4.A.3|1
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Front front brake binding both |3.7.B.1|1
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill areas (6.1.1 (c) (i))1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill areas (6.1.1 (c) (i))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sil l corroded (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch. end of sill (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS RAIL (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL (5.3.6 (a) (i))1
Central Exhaust has a major leak of exhaust gases SILENCER (6.1.2 (a))1
Offside Rear Lower Anti-roll bar linkage insecure |2.4.G.1|1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch area/chassis (5.3.6 (a) (i))1
Exhaust has a major leak of exhaust gases rear joint (6.1.2 (a))1
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside rear inner and outer sill (6.1.1 (c) (i))1
Offside Rear Outer Suspension component mounting prescribed area is inadequately repaired Sill (5.3.6 (a) (i))1
Brake performance not tested Due to split brake pipe (1.2.1 (g))1
Nearside Front Headlamp light source and lamp not compatible aftermarket xenon kit fitted (4.1.4 (c))1
Offside Front Headlamp light source and lamp not compatible aftermarket xenon kit fitted (4.1.4 (c))1
Offside Rear Upper Anti-roll bar linkage insecurely attached o/s/r upper joint nut loose (5.3.3 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i))1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting susp mount under bonnet (6.2.2 (d) (i))1
Offside Front Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassic (6.2.2 (d) (i))1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2|1
Anti-roll bar modified so the suspension is likely to fail other components (5.3.3 (c) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie leg (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie leg (5.3.6 (a) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner & outer sill (6.1.1 (c) (i))1
Offside Front Anti-roll bar insecurely attached Bolt loose (5.3.3 (a) (i))1
Central Braking system leaking |3.6.A.1|1
Brake pipe connection leaking on a hydraulic braking system pipe on back of A.B.S. unit (1.1.11 (b) (ii))1
Exhaust has a major leak of exhaust gases rear clamps (6.1.2 (a))1
Emissions not tested due to oil leak (8.2.1.2 (d))1
Offside Rear Battery insecure and likely to fall from carrier due to corrosion (4.13 (a) (ii))1
Offside Front Electronic stability system warning lamp indicates a fault |3.4.1c|1
Nearside Front Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Front Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Outer Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3|1
Offside Outer Rear Seat belt anchorage prescribed area is inadequately repaired |5.2.6|1
Offside Front Upper Suspension arm corroded and seriously weakened wishbone |2.4.G.1|1
Offside Front Lower Suspension arm corroded and seriously weakened wishbone |2.4.G.1|1
Nearside Front Upper Suspension arm corroded and seriously weakened wishbone |2.4.G.1|1
Nearside Front Lower Suspension arm corroded and seriously weakened wishbone |2.4.G.1|1
Nearside Rear Upper Suspension arm corroded and seriously weakened wishbone |2.4.G.1|1
Nearside Rear Lower Suspension arm worn and seriously weakened wishbone |2.4.G.1|1
Offside Rear Upper Suspension arm corroded and seriously weakened wishbone |2.4.G.1|1
Offside Rear Lower Suspension arm corroded and seriously weakened wishbone |2.4.G.1|1
Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))1
Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded floor pan |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor pan |5.2.6|1
Exhaust has a major leak of exhaust gases middle and rear section (6.1.2 (a))1
Nearside Front front brake binding solid |3.7.B.1|1
Horn not a continuous or uniform sound |1.6.2e|1
Suspension component mounting prescribed area is excessively corroded hole in chassis |2.4.A.3|1
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings well arch |6.1.B.2|1
Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings well arch |6.1.B.2|1
Headlamps matched pair are not the same colour |1.7.6|1
Offside Rear Road wheel fixing missing one |5.2.1 |a| |i||1
Nearside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cill (6.2.2 (d) (i))1
Offside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cill (6.2.2 (d) (i))1
Offside Front Macpherson strut has an unsafe modification coilover locking collar loose (5.3.3 (c) (i))1
Fuel cap/sealing device ineffective fuel flap not accessible (6.1.3 (b) (i))1
Front Bumper likely to become detached (6.1.4 (a) (ii))1
Nearside Rear Suspension component has an unsafe modification COILOVER LOCKING COLLAR NOT TIGHT (5.3.3 (c) (i))1
Offside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))1
Nearside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (chalked) (6.1.1 (c) (i))1
Front Brake disc significantly and obviously worn corroded inside face (1.1.14 (a) (i))1
Nearside Rear Brake lining(s) missing (1.1.13 (c))1
Exhaust has a major leak of exhaust gases CENTRE/REAR |6.1.2 |a||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under side and outer (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength underside and outer (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to outrigger (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under bonnet near strut top (5.3.6 (a) (i))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced badly corroded at inner wheel arch next to chassis large hole (6.1.1 (c) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill badly corroded . hole (6.2.2 (d) (i))1
Central Upper Stop lamp(s) not working (4.3.1 (a) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rollbar bracket (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rollbar bracket (5.3.6 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i||1
Brake performance unable to be tested brake hoses leaking (1.2.1 (g))1
Exhaust has a major leak of exhaust gases centre pipe to back box |6.1.2 |a||1
Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2|1
Nearside Rear Braking system leaking at caliper |3.6.A.1|1
Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired underside corroded and holed (6.2.2 (d) (ii))1
Anti-roll bar linkage has excessive play in a ball joint o/s & n/s |2.4.G.2|1
Nearside Rear Lower Radius arm corroded and seriously weakened |2.4.G.1|1
Offside Rear Lower Radius arm corroded and seriously weakened |2.4.G.1|1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail (inner arch underside of chassis rail) (6.2.2 (d) (i))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail (inner arch underside of chassis rail) (6.2.2 (d) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail (under bonnet inner side of chassis rail) (6.2.2 (d) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill to quarter panel area (6.2.2 (d) (i))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill to quarter panel area (6.2.2 (d) (i))1
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits Sports catalytic converter fitted (8.2.1.2 (b))1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hole in outer sill |6.1.B.2|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hole in outer sill |6.1.B.2|1
Nearside Outer Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Outer Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Seat belt anchorage prescribed area is excessively corroded rear inner sill |5.2.6|1
Braking system leaking Front to rear brake pipe |3.6.A.1|1
Offside Seat belt anchorage prescribed area is excessively corroded Outer sill corroded |5.2.6|1
Offside Brake slack adjuster has restricted free movement |3.5.1k|1
Nearside Direction indicator adversely affected by the operation of another lamp |1.4.A.2h|1
Nearside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Rear Anti-roll bar fractured |2.4.G.1|1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill/floor (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill/floor (6.1.1 (c) (i))1
Offside Rear Seat belt anchorage likely to become detached in the event of a collision Inner sill (7.1.1 (a) (ii))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced underside sill area corroded and hold (7.1.1 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced underside sill rear end area corroded and hold (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis as marked (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis as marked (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under car sill as marked (7.1.1 (a) (i))1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill as marked (7.1.1 (a) (i))1
Nearside Rear Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1|1
Offside Front Driver`s seat insecure |6.2.A.1|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch chassis leg (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch lower side of chassis leg (5.3.6 (a) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail in the engine bay (6.1.1 (c) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail in the engine bay (6.1.1 (c) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired outer sill |6.2.2 |d| |ii||1
Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired outer sill |6.2.2 |d| |ii||1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis, above anti roll bar mount |5.3.6 |a| |ii||1
Nearside Front Valve stem seriously damaged perished (5.2.3 (j))1
Offside Front Valve stem seriously damaged perished (5.2.3 (j))1
Offside Rear Valve stem seriously damaged perished (5.2.3 (j))1
Offside Front Anti-roll bar linkage insecurely attached ball joint not attached (5.3.3 (a) (i))1
Offside Front Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired behind bumper (6.2.2 (d) (ii))1
Nearside Front Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired behind bumper (6.2.2 (d) (ii))1
Nearside Front Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))1
Offside Front Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))1
Brake performance unable to be tested due to chassis condition (1.2.1 (g))1
Emissions not tested due to coolant leak (8.2.1.2 (d))1
Nearside Rear Suspension arm modified and seriously weakened |2.4.A.2|1
Offside Rear Suspension arm modified and seriously weakened |2.4.A.2|1
Emissions not tested run out of fuel |7.3.A.1|1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember |6.1.1 |c| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember |6.1.1 |c| |i||1
Nearside Front Upper Front suspension locking device missing split pin missing |2.5.A.4|1
Offside Steering locking device missing track rod end split pin mising |2.2.C.1g|1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s/rear inner/sill |5.3.6 |a| |i||1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner arch |6.2.2 |d| |i||1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner arch |6.2.2 |d| |i||1
Offside Rear Fluid leak harmful to the environment or a risk to other road users |8.4.1 |a| |i||1
Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front lower chassis rail corroded/hole (6.1.1 (c) (i))1
Rear Exhaust has a major leak of exhaust gases flange corroded and bolt broken at rear join (6.1.2 (a))1
Exhaust Lambda reading after 2nd fast idle outside specified limits high (8.2.1.2 (c))1
Power steering component|s| leaking leaking around rack area |2.3.3b|1
Offside Rear Suspension arm corroded and seriously weakened has hole corroded in arm |2.4.G.1|1
Nearside Front All position lamps not working side light |1.1.A.3b|1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner & outer sill (5.3.6 (a) (i))1
Offside Front Lower Anti-roll bar linkage insecurely attached loose (5.3.3 (a) (i))1
Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both outer sills corroded at rear (6.1.1 (c) (i))1
Offside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to sill |6.1.B.2|1
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill Holed & Corroded (6.1.1 (c) (i))1
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill Holed & Corroded (6.1.1 (c) (i))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Battery Tray /Carrier (6.2.2 (d) (i))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis Holed & Corroded by Roll Bar Mount (6.2.2 (d) (i))1
Rear Anti-roll bar damaged and seriously weakened |2.4.G.1|1
Offside Rear Anti-roll bar attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1|1
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced majority of inner sill corroded (marked in white) holes made at time of test (7.1.1 (a) (i))1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced majority of inner sill corroded (marked in white) holes made at time of test (7.1.1 (a) (i))1
Offside Front Inner Seat belt anchorage prescribed area is inadequately repaired front of inner sill has holes in welding on a previous repair (marked in white) plate could be peeled away from body (7.1.1 (a) (i))1
Nearside Front Lower Body panel likely to become detached bottom of passenger front wing corroded and tearing from fixings (6.2.1 (a) (ii))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of wheel arch on boot floor (holes made at time of test) (marked in white) (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of wheel arch on boot floor (holes made at time of test) (marked in white) (5.3.6 (a) (i))1
Emissions not tested major exhaust leak (8.2.1.2 (d))1
Exhaust has a major leak of exhaust gases major leak at centre of exhaust system (emissions not tested) (6.1.2 (a))1
Exhaust has a major leak of exhaust gases centre and rear section detached (6.1.2 (a))1
Nearside Front Headlamp aim projected beam image is obviously incorrect lens faded (4.1.2 (c))1
Offside Front Headlamp aim projected beam image is obviously incorrect lens faded (4.1.2 (c))1
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill marked in yellow (6.1.1 (c) (i))1
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill marked in yellow (6.1.1 (c) (i))1
Exhaust has a major leak of exhaust gases rear silencer to mid section joint corroded away (6.1.2 (a))1
Offside Rear Seat belt anchorage prescribed area is excessively corroded floor |5.2.6|1
Nearside Front Lower Suspension arm attachment bracket/mounting insecure |2.4.G.1|1
Offside Front Upper Suspension component mounting prescribed area is excessively corroded shock mount |2.4.A.3|1
Nearside Front Lower Seat belt anchorage prescribed area is inadequately repaired outer sill |5.2.6|1
Offside Front Lower Seat belt anchorage prescribed area is inadequately repaired outer sill |5.2.6|1
Nearside Front Upper Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6|1
Offside Front Upper Seat belt anchorage prescribed area is inadequately repaired inner wheel arch |5.2.6|1
Nearside Outer Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing panel |2.4.A.3|1
Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing panel |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced nearside inner sill holed near seatbelt mount (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced offside inner sill hole with in perscribved area (7.1.1 (a) (i))1
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced offside chassis leg holed (6.1.1 (c) (i))1
Battery insecure and likely to fall from carrier battery box corroded and holed (4.13 (a) (ii))1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/floor (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/inner sill (5.3.6 (a) (i))1
rear brake recording little or no effort o/s rear parking brake |3.7.B.5a|1
Nearside Steering pivot point has excessive play |2.2.B.1g|1
Offside Rear Road wheel fixing missing wheel nut missing (5.2.1 (a) (i))1
Exhaust has a major leak of exhaust gases tail box to centre pipe joint |7.1.2|1
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill previous repair (5.3.6 (a) (ii))1
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded body sill |5.2.6|1
Nearside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))1
Offside Front Outer Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii))1
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced and outer sill (6.1.1 (c) (i))1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i||1
Nearside Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i))1
Offside Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i))1
Offside Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i))1
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER BAY (6.2.2 (d) (i))1
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER BAY (6.2.2 (d) (i))1
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting FLOOR (6.2.2 (d) (i))1
Rear Brake lining(s) less than 1.5 mm thick (1.1.13 (a) (ii))1
Offside Power steering pipe|s| or hose|s| leaking |2.3.3b|1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill area (7.1.1 (a) (i))1
Offside Front Lower Shock absorbers insecurely attached mounting nut missing (5.3.2 (a) (i))1
Offside Front Suspension arm ball joint excessively worn |5.3.4 |a| |i||1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill. (6.2.2 (d) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill. (6.2.2 (d) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill end. (6.2.2 (d) (i))1
Parking brake inoperative on one side nearside rear |1.4.1 |a||1
Exhaust carbon monoxide content at idle exceeds default limits co excessive |8.2.1.2 |b||1
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill (5.3.6 (a) (ii))1
Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension arm (5.3.6 (a) (i))1
Rear Exhaust has a major leak of exhaust gases blowing at rear joint |7.1.2|1
Offside Rear Anti-roll bar fractured broken off |2.4.G.1|1
Offside Seat belt anchorage likely to become detached in the event of a collision inner sill (7.1.1 (a) (ii))1
Nearside Front Seat belt anchorage likely to become detached in the event of a collision floor (7.1.1 (a) (ii))1
Offside Front Seat belt anchorage likely to become detached in the event of a collision floor (7.1.1 (a) (ii))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor to inner sill holed and corroded (7.1.1 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed and corroded (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch holed and corroded (5.3.6 (a) (i))1
Rear Exhaust emissions likely to be affected by an exhaust leak back box (8.2.2.1 (b))1
Front Anti-roll bar linkage ball joint excessively worn Both (5.3.4 (a) (i))1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Leg (arch) (6.2.2 (d) (i))1
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheelarch |5.3.6 |a| |i||1
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheelarch and outer sill area |5.3.6 |a| |i||1
Nearside Front Subframe mounting prescribed area is excessively corroded chasis leg |2.4.A.3|1
Offside Front Subframe mounting prescribed area is excessively corroded chasis leg |2.4.A.3|1
Nearside Suspension component mounting prescribed area is excessively corroded outer sill area |2.4.A.3|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor area and inner sill area (7.1.1 (a) (i))1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor area (5.3.6 (a) (i))1
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i))1
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i))1
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area (5.3.6 (a) (i))1
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer sill area (5.3.6 (a) (i))1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/s rear sill (6.2.2 (d) (i))1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting o/s rear inner sill (6.2.2 (d) (i))1
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s rear sill (6.1.1 (c) (i))1
Rear Brake disc significantly and obviously worn Both (1.1.14 (a) (i))1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2|1
Nearside Front Anti-roll bar linkage attachment bracket/mounting likely to fail (5.3.3 (b) (ii))1
Offside Front Anti-roll bar linkage attachment bracket/mounting likely to fail (5.3.3 (b) (ii))1
Offside Rear Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg by anti roll bar mount |2.4.A.3|1
Exhaust has a major leak of exhaust gases centre section to rear section |7.1.2|1
Rear Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4|1
Front position lamp|s| not working nearside and offside |1.1.A.3b|1
Offside Front Suspension component mounting prescribed area is excessively corroded inner sill/wheel arch |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch to engine bay |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill/floor |5.2.6|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill. |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill. |2.4.A.3|1
Nearside Rear Anti-roll bar fractured (5.3.3 (b) (ii))1
Offside Seat belt webbing significantly weakened damaged/ torn |7.1.2 |b| |ii||1
Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring area (5.3.6 (a) (i))1
Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii||1
Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Offside front roll bar mount (6.2.2 (d) (i))1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Strut top mount (6.2.2 (d) (i))1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting strut top mount (6.2.2 (d) (i))1
Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Drivers seat belt and seat (6.2.2 (d) (i))1
Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting nearside seat (6.2.2 (d) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/shock mount and chassis leg (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area is inadequately repaired filler/fibre glass inner wheel arch (5.3.6 (a) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill panel (6.2.2 (d) (i))1
Offside Rear Brake pivot has restricted free movement |3.5.1k|1
Offside Front Brake hose excessively stretched on full steering lock (1.1.12 (b) (ii))1
Nearside Front Brake hose excessively stretched on full steering lock (1.1.12 (b) (ii))1
Nearside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength inner wing |2.4.A.3|1
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill |6.2.2 |d| |i||1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg |6.1.1 |c| |i||1
Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced Chassis leg |6.1.1 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded marked in yellow |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor marked in yellow |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded at rear outer sill within 30 cms of inner belt mount marked yellow |5.2.6|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg as marked above top wishbone |2.4.A.3|1
Nearside Front coil spring modified and seriously weakened cut |2.4.A.2|1
Offside Front coil spring modified and seriously weakened cut |2.4.A.2|1
Nearside Rear coil spring modified and seriously weakened cut |2.4.A.2|1
Offside Rear coil spring modified and seriously weakened cut |2.4.A.2|1
Offside Front Inner Subframe mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))1
Central Brake pipe leaking on a hydraulic braking system *Front to rear* (1.1.11 (b) (ii))1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2|1
Nearside Outer Floor excessively deteriorated sill |6.2.4 |a| |i||1
Nearside Parking |secondary brake| on a single line braking system has inadequate effort at a wheel almost no effort |1.3.1 |a| |i||1
Offside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))1
Offside Front Anti-roll bar linkage attachment bracket/mounting likely to fail |5.3.3 |b| |ii||1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area (7.1.1 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg area (5.3.6 (a) (i))1
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg area (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg area (5.3.6 (a) (i))1
Offside Rear Valve stem seriously damaged excessively perished |4.1.D.1e|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis box bottom (5.3.6 (a) (i))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis box bottom (5.3.6 (a) (i))1
Rear Parking brake lever has no reserve travel 13 clicks |3.1.6b|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill and outer wing corrosion (6.1.1 (c) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front chassis and o/s front floor by |5.3.6 |a| |i||1
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill by |2.4.A.3|1
Offside Outer Suspension component mounting prescribed area is excessively corroded sill by |2.4.A.3|1
Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill to floor |7.1.1 |a| |i||1
Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill to floor & outer sill |7.1.1 |a| |i||1
Nearside Outer Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt offside & nearside (5.3.4 (b) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength more than one place (5.3.6 (a) (i))1
Nearside Outer Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i))1
Outer Seat belt anchorage prescribed area strength or continuity significantly reduced offside & nearside (7.1.1 (a) (i))1
Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced offside & nearside (7.1.1 (a) (i))1
Exhaust has a major leak of exhaust gases Centre to rear flange (6.1.2 (a))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Anti roll bar (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Anti roll bar (5.3.6 (a) (i))1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2|1
Nearside Front Steering system fouling Under Tray Fouling On Steering Arm |2.2.D.2a|1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill at rear (5.3.6 (a) (i))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill at rear (5.3.6 (a) (i))1
Power steering pipe/hose leaking pipe leaking and steering not working |2.1.5 |a||1
Exhaust has a major leak of exhaust gases centre to rear joint |7.1.2|1
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits due to exhaust blow |7.3.D.3|1
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sills |2.4.A.3|1
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sills |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg outer |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded Inner wheel arch painted white |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded Outer sill painted white |5.2.6|1
Power steering inoperative leaking |2.3.3a|1
Brake hydraulic reservoir cap missing |3.6.G.1a|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor / inner sill (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by roll bar bracket (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded chasis, roll bar mount |2.4.A.3|1
Exhaust has a major leak of exhaust gases rear section joint (6.1.2 (a))1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis box section holed by corrosion, |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis box section holed by corrosion, |2.4.A.3|1
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill holed by corrosion, |2.4.A.3|1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill rusted with hole (rotten). (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rust hole near osf roll bar mount (5.3.6 (a) (i))1
front brake binding BOTH |3.7.B.1|1
Nearside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2|1
Offside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail corroded and holed (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail corroded and holed (5.3.6 (a) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced upper wheel arch (7.1.1 (a) (i))1
Nearside Headlamp aim beam image obviously incorrect no pattern |1.8.A.1b|1
Offside Headlamp aim beam image obviously incorrect no pattern |1.8.A.1b|1
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded arch near suspension |2.4.A.3|1
Offside Rear Wheel nut|s| missing 1 |4.2.A.1e|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner & outer sill holed |7.1.1 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner & outer sill holed |7.1.1 |a| |i||1
Nearside Body component damaged and likely to cause injury wing mirror casing |6.2.1 |a| |i||1
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded inside wheel arch |5.2.6|1
Offside Front Steering component mounting prescribed area is excessively corroded floor n/s o/s |2.2.C.1h|1
Boot lid likely to become detached (6.2.1 (a) (ii))1
Front Lower Exhaust has a major leak of exhaust gases |7.1.2|1
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed at the rear (6.1.1 (c) (i))1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed at the rear (6.1.1 (c) (i))1
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded inner wheel arch area (1.1.21 (e) (i))1
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits 0.6% (8.2.1.2 (a))1
Exhaust carbon monoxide content at idle exceeds default limits 0.3% (8.2.1.2 (b))1
Offside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a|1
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2|1
Nearside Rear Vehicle structure is deformed and structural rigidity is significantly reduced inner sill (6.1.1 (a) (i))1
Offside Rear Vehicle structure is deformed and structural rigidity is significantly reduced inner sill (6.1.1 (a) (i))1
Nearside Front Vehicle structure is deformed and structural rigidity is significantly reduced floor (6.1.1 (a) (i))1
Front passenger door cannot be opened from outside the vehicle |6.2.3 |a||1
Exhaust has a major leak of exhaust gases Centre & rear |6.1.2 |a||1
Seat belt anchorage prescribed area strength or continuity significantly reduced Nearside sill |7.1.1 |a| |i||1
Seat belt anchorage prescribed area strength or continuity significantly reduced Nearside inner sill/floor |7.1.1 |a| |i||1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside front chassis |5.3.6 |a| |i||1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nearside front chassis |5.3.6 |a| |i||1
Exhaust has a major leak of exhaust gases Centre/rear (6.1.2 (a))1
Offside Rear Integral body structure is deformed and structural rigidity is significantly reduced outer sill |6.1.1 |a| |i||1
Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner sill (6.2.2 (d) (i))1
Seat belt anchorage prescribed area strength or continuity significantly reduced Nearside sill & inner sill |7.1.1 |a| |i||1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside & nearside front chassis/inner arch |5.3.6 |a| |i||1
Nearside Direction indicators flashing more than 120 times a minute |1.4.A.2g|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg by anti roll bar (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill/wheelarch |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill/wheelarch |5.2.6|1
Offside Rear Body has a sharp edge caused by corrosion sill bottom |6.1.C.1|1
Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner chassis rail |6.1.B.2|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill panel |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill panel |6.1.B.2|1
Nearside Front Brake pipe seriously damaged |found during steering lock to lock check| |2.2.D.2b|1
Nearside Seat belt anchorage prescribed area is excessively corroded floor corroded and holed |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill corroded/holed |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill corroded/holed |5.2.6|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis excessivly corroded/holed |2.4.A.3|1
Rear Brake pipe at imminent risk of failure or fracture (1.1.11 (a))1
Exhaust Lambda reading after 2nd fast idle outside specified limits exhaust leak in pipework (8.2.1.2 (c))1
Central Exhaust has a major leak of exhaust gases centre section of exhaust (6.1.2 (a))1
Offside Headlamp lens seriously defective plastic headlamp lens deteriorated, reducing lamps effective output (4.1.1 (b) (ii))1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected front anti-roll bar supporting bracket mounting point, excessively corroded[ within wheel arch area] (5.3.6 (a) (ii))1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected front anti-roll bar supporting bracket mounting point, excessively corroded[ within wheel arch area] (5.3.6 (a) (ii))1
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill section corroded. (5.3.6 (a) (i))1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill section corroded. (5.3.6 (a) (i))1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill section. |7.1.1 |a| |i||1
Nearside Front Seat belt damaged (7.1.2 (b) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer and under sills (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer and under sills (7.1.1 (a) (i))1
Emissions not tested exhaust leak lambda high (8.2.1.2 (d))1
Rear Exhaust has a major leak of exhaust gases input join rear silencer (6.1.2 (a))1
Front Service brake lagging in operation nsf slow 37% (1.2.1 (d))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner back wheel arch chassis leg |5.3.6 |a| |i||1
Offside Front Anti-roll bar attachment bracket/mounting insecure inner back wheel arch bolt missing |5.3.3 |a| |i||1
Offside Rear Lower Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Brake pipe leaking front to rear |3.6.A.1|1
Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened nut (5.3.3 (b) (i))1
Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened nut (5.3.3 (b) (i))1
Nearside Rear Brake pivot has restricted free movement |3.5.1k|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced lower inner sill (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength ante roll bar (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength anteroll bar (5.3.6 (a) (i))1
Nearside Front Position lamp not working 501 bulb (4.2.1 (a) (ii))1
Offside Headlamp aim unable to be tested INOP (4.1.2 (b))1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))1
Offside Body component damaged and likely to cause injury mirror case damaged and sharp (6.2.1 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing as marked (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill as marked (5.3.6 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill around jacking point (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing on chassis / ARB mounting as marked (5.3.6 (a) (i))1
Offside Front Upper Anti-roll bar attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))1
Vehicle structure has damage which adversely affects braking or steering |6.1.A.1|1
Offside Suspension component mounting prescribed area is excessively corroded outersill |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill lower wheel arch (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill and lower wheel arch (7.1.1 (a) (i))1
Offside Front Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction Sunvisor insecure (3.1 (a) (ii))1
Nearside Front Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction Sunvisor insecure (3.1 (a) (ii))1
Offside Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Offside Front Inner Subframe mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Front Outer Subframe mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside front inner wing behind front wheel (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner to outer sill/inner arch (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner to outer sill/inner arch (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under arch (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under arch (5.3.6 (a) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER AND OUTER SILL. (6.1.1 (c) (i))1
Offside Rear Body panel corroded and likely to cause injury under sill (6.2.1 (a) (i))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear of sill |7.1.1 |a| |i||1
Exhaust emissions likely to be affected by an exhaust leak tail box joint (8.2.1.1 (b))1
Nearside Rear Sub-frame pin or bush likely to become detached (5.3.4 (a) (ii))1
Offside Rear Sub-frame pin or bush likely to become detached (5.3.4 (a) (ii))1
Electrical wiring inadequately supported |1.9.2a|1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill to floor corroded. (5.3.6 (a) (i))1
Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Both O/S & N/S front floor to sills corroded. (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength O/S/F chassis by anti roll bar mounting corroded. (5.3.6 (a) (i))1
Nearside Seat belt anchorage prescribed area is excessively corroded nearside outer sill |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded offside outer sill |5.2.6|1
Emissions unable to be completed due to poor runing (8.2.1.2 (d))1
Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing holed (5.3.6 (a) (i))1
Suspension spring mounting prescribed area is excessively corroded both inner and outer sills |2.4.A.3|1
Offside Front Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3|1
Rear Seat belt anchorage prescribed area strength or continuity significantly reduced both sides rear outer sills |7.1.1 |a| |i||1
Offside Rear Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i||1
Exhaust catalytic converter missing where one was fitted as standard cut off (8.2.1.1 (a))1
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill middle (7.1.1 (a) (i))1
Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill into arch (5.3.6 (a) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired arch (6.2.2 (d) (ii))1
Offside Front Suspension component mounting prescribed area is excessively corroded chassi leg |2.4.A.3|1
Offside Front Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i))1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings by suspension support |6.1.B.2|1
Central Rear Axle beam has excessive vertical movement between stub axle and axle beam supports |2.5.A.1a|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie to inner wing (5.3.6 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sikll/floor (7.1.1 (a) (i))1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i||1
Nearside Body has a sharp edge caused by damage Door mirror |6.1.C.1|1
Nearside Front Suspension component mounting prescribed area is excessively corroded Under bonnet |2.4.A.3|1
Offside Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Nearside Front Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))1
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill, inside wheel arch (5.3.6 (a) (i))1
Road wheel more than one fixing missing all 4 (5.2.1 (a) (ii))1
Nearside Rear Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii))1
Offside Rear Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii))1
Nearside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill corroded and weakend |6.1.A.1|1
Offside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering rear of sill corroded and holed |6.1.A.1|1
Offside Front Anti-roll bar linkage ball joint excessively worn detached (5.3.4 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti role bar mount |5.3.6 |a| |i||1
Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti role bar mount |5.3.6 |a| |i||1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti role bar mount |5.3.6 |a| |i||1
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti role bar mount |5.3.6 |a| |i||1
Nearside Rear Hydraulic fluid leaking excessively caliper (8.4.1 (a) (i))1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch lower |2.4.A.3|1
Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch upper and lower |2.4.A.3|1
Nearside Rear Brake linkage has restricted free movement |3.5.1k|1
Rear Brake pipe leaking on an air braking system (1.1.11 (b) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced holed. (7.1.1 (a) (i))1
Offside Rear Coil spring fractured or broken Leaning rear end (5.3.1 (b) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill holed (6.1.1 (c) (i))1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Engine bay/ chassis beam holed (6.1.1 (c) (ii))1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Engine bay/ chassis beam holed (6.1.1 (c) (ii))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor holed (6.1.1 (c) (i))1
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Both rear sills, inner and outer excessively corroded within prescribed areas of seat and seat belt belt mountings (6.1.1 (c) (i))1
Seat belt anchorage prescribed area strength or continuity significantly reduced Nearside rear inner sill and sill end (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength @ Inner Wheel Arch, Chassis Leg, Above Offside Front Inner Anti-roll Bar D Bush (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength @ Inner Wheel Arch, Chassis Leg, Above Offside Front Inner Anti-roll Bar D Bush (5.3.6 (a) (i))1
Offside Front Anti-roll bar linkage insecure adrift |2.4.G.1|1
Brake performance not tested due to heavy fluid leak from caliper |3.7.A.1|1
Power steering pipe/hose modification unsafe (2.1.5 (f) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and inner wing (5.3.6 (a) (i))1
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sills |5.3.6 |a| |i||1
Brake linkage has abnormal movement of levers indicating maladjustment |3.5.1f|1
Offside Front Body has a projection caused by damage |6.1.C.1|1
Offside Front Side repeater excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e|1
Offside Front Side repeater obviously incorrectly positioned |1.4.A.2b|1
Power steering pump leaking (2.1.5 (a))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill area inner and outer (7.1.1 (a) (i))1
Nearside Front Upper Suspension arm modified so the suspension is likely to foul other components wishbone catching the shock absorbers (5.3.3 (c) (ii))1
Offside Front Upper Suspension arm modified so the suspension is likely to foul other components wishbone catching the shocks absorber (5.3.3 (c) (ii))1
Nearside Front Upper Suspension component ball joint likely to become detached split pin missing (5.3.4 (a) (ii))1
Nearside Front Windscreen damaged and affecting the drivers view of the road (3.2 (a) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch / chassis rail |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch / chassis rail |5.3.6 |a| |i||1
Nearside Rear rear brake grabbing severely |3.7.A.5b|1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s n/s as marked |5.3.6 |a| |i||1
Seat belt anchorage prescribed area strength or continuity significantly reduced o/s n/s inner and outter sills |7.1.1 |a| |i||1
Nearside Body component insecure wing mirror (6.2.1 (a) (i))1
Stop lamp(s) all missing (4.3.1 (a) (iii))1
Emissions not tested engine is missfireing (8.2.1.2 (d))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced and outer sills (7.1.1 (a) (i))1
Emissions not tested due to exhaust leaking |7.3.A.1|1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced & outer sill & floor (7.1.1 (a) (i))1
Power steering ram leaking (2.1.5 (a))1
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis leg (5.3.6 (a) (i))1
Nearside Rear Shock absorbers has an excessively worn bush top mount (5.3.2 (c))1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis. |2.4.A.3|1
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Large hole in floor/sill area (6.2.2 (d) (i))1
Nearside Rear Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill (6.2.2 (d) (i))1
Offside Rear Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill (6.2.2 (d) (i))1
Nearside Rear Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill (6.2.2 (d) (i))1
Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting arch (6.2.2 (d) (i))1
Nearside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting arch going in to chassis leg very bad (6.2.2 (d) (i))1
Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting BOTH SIDES INNER AND OUTER SILLS (6.2.2 (d) (i))1
Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Inner arch (6.2.2 (d) (i))1
Emissions unable to be completed Running issue (8.2.1.2 (d))1
Battery insecure and likely to fall from carrier Rotten underneath and visible from below (4.13 (a) (ii))1
Nearside Rear Outer Seat belt anchorage prescribed area is inadequately repaired Will has been repaired with body filler (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outter and inner sill corroded and holed (7.1.1 (a) (i))1
Offside Rear Suspension arm cracked |2.4.G.1|1
Offside Front Anti-roll bar linkage insecure and impairing directional stability broken (5.3.3 (a) (ii))1
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering under sill (6.1.1 (c) (ii))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outter sill |7.1.1 |a| |i||1
Nearside Rear brake caliper inappropriately repaired |3.5.1n|1
Nearside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering Sill |6.1.1 |c| |ii||1
Offside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering Sill |6.1.1 |c| |ii||1
Offside Rear Anti-roll bar attachment bracket/mounting insecure drop link to lower arm,mounting point rusted away. |2.4.G.1|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill. |7.1.1 |a| |i||1
Rear Exhaust has a major leak of exhaust gases Center joint to back box (6.1.2 (a))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Excessively corroded Arch / Sill |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Excessively corroded Arch / Sill |7.1.1 |a| |i||1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill area |7.1.1 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill area |7.1.1 |a| |i||1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Arch (7.1.1 (a) (i))1
Nearside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings Near Front Spring Mount |6.1.B.2|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Near Front Spring mount |6.1.B.2|1
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer sill (7.1.1 (a) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/f inner sill/ A post (6.1.1 (c) (i))1
Nearside Seat belt anchorage prescribed area is fractured outer sill panel |5.2.6|1
Offside Seat belt anchorage prescribed area is fractured outer sill panel |5.2.6|1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch (6.2.2 (d) (i))1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch (6.2.2 (d) (i))1
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch (6.2.2 (d) (i))1
Brake performance not tested rear pads fallen apart (1.2.1 (g))1
Nearside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering (6.1.1 (a) (ii))1
Nearside Front Headlamp light source and lamp not compatible dip and main bulbs led type (4.1.4 (c))1
Offside Front Headlamp light source and lamp not compatible dip and main bulbs led type (4.1.4 (c))1
Nearside Front Seat belt missing seat buckle/stalk missing (7.1.2 (a))1
Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction sun strip (3.1 (a) (ii))1
Nearside Rear Upper Suspension arm insecurely attached (5.3.3 (a) (i))1
Offside Front Inner Steering component mounting prescribed area is excessively corroded arch/wing/chassis (2.1.2 (e) (i))1
Nearside Front Brake pipe leaking on an air braking system (1.1.11 (b) (i))1
Power steering pipe|s| or hose|s| excessively corroded front |2.3.2|1
Offside Rear Lower Suspension arm fractured has a hole (5.3.3 (b) (ii))1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i))1
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength N/S & O/S inner sill (5.3.6 (a) (i))1
Brake performance not tested rear brake pipe burst on test |3.7.A.1|1
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s + o/s rear off sill inner and outer |6.1.B.2|1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis rail |anti roll bar| |5.3.6 |a| |ii||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced under side floor |7.1.1 |a| |i||1
Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis corroded o/s & n/s near steering / suspension |5.3.6 |a| |i||1
Nearside Steering component damaged and unserviceable |2.2.C.1d|1
Nearside Steering rack damaged and unserviceable |2.2.C.1d|1
Nearside Track rod end damaged and unserviceable |2.2.C.1d|1
Nearside Rear Upper coil spring incomplete |2.4.C.1a|1
Nearside Front Suspension component mounting prescribed area is excessively corroded ball joint nuts corroded away |2.4.A.3|1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i||1
Nearside Rear Fluid leaking continuously posing a serious risk to road safety brake |8.4.1 |a| |ii||1
Hazard warning lamps inoperative battery draining on vehicle (4.4.1 (e))1
Emissions not tested vehicle miss firing due to battery drain (8.2.1.2 (d))1
Brake performance not tested vehicle wont run due to battery drain (1.2.1 (g))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wing in next to the engine (6.2.2 (d) (i))1
Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))1
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn (5.1.2 (b) (i))1
Offside Front Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b|1
Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch chassis |6.1.B.2|1
Offside Front Upper Suspension arm has excessive play in a pin/bush wish bone front bush |2.4.G.2|1
Nearside Front Upper Suspension arm has excessive play in a pin/bush inner mountings |2.4.G.2|1
Nearside Front Additional braking device heat shield damaged |3.6.I.3|1
Offside Front Additional braking device heat shield missing |3.6.I.3|1
Nearside Front Subframe mounting prescribed area is inadequately repaired floor |2.4.A.3|1
Offside Front Inner Subframe mounting prescribed area is excessively corroded marked with yellow chalk |2.4.A.3|1
Offside Front Lower Macpherson strut pin or bush excessively worn LOWER BUSH, BADLY SPLIT. (5.3.4 (a) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL TO FLOOR AREA, CORRODED. (6.1.1 (c) (i))1
Offside Front Lower Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt joint boot part missing (5.3.4 (b) (ii))1
Offside Rear Integral body structure has excessive corrosion which adversely affects braking or steering OUTER SILL CORROSION. |6.1.1 |c| |ii||1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Rear of sill (7.1.1 (a) (i))1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting jacking (6.2.2 (d) (i))1
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii||1
Offside Front Emissions unable to be completed (8.2.1.2 (d))1
Wheel bolt|s| missing |4.2.A.1e|1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill and arch |7.1.1 |a| |i||1
Offside Windscreen wiper blade missing (3.4 (b) (ii))1
Offside Sub-frame rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Rear Sub-frame synthetic bush deteriorated resulting in excessive movement |2.4.G.2|1
Offside Rear Suspension arm corroded and seriously weakened top wishbone |2.4.G.1|1
Nearside Rear Suspension arm corroded and seriously weakened top wishbone |2.4.G.1|1
Nearside Front brake caliper has restricted free movement bindin |3.5.1k|1
Nearside Rear Subframe mounting prescribed area is excessively corroded outer sill holed |2.4.A.3|1
Emissions not tested excessive blow to rear (8.2.1.2 (d))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg - engine bay (5.3.6 (a) (i))1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor and 1/4 (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 1/4 , floor , battery tray (5.3.6 (a) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced a pillar base / floor (6.1.1 (c) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing / chassis leg (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing / arch (5.3.6 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing / chassis leg (5.3.6 (a) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced floor , 1/4 (7.1.1 (a) (i))1
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii||1
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii||1
Offside Vehicle structure has excessive corrosion which adversely affects braking or steering outer sil (6.1.1 (c) (ii))1
Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering outer sil (6.1.1 (c) (ii))1
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid |1.1.16 |b| |i||1
Nearside Rear Braking system leaking Caliper. |3.6.A.1|1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill area (7.1.1 (a) (i))1
Exhaust has a major leak of exhaust gases Rear section (6.1.2 (a))1
Seat belt anchorage prescribed area strength or continuity significantly reduced n/s/r inner sill box section |7.1.1 |a| |i||1
Seat belt anchorage prescribed area strength or continuity significantly reduced o/s/r inner sill box section |7.1.1 |a| |i||1
Offside Suspension component mounting prescribed area is excessively corroded OUTER SILL |2.4.A.3|1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill panel |7.1.1 |a| |i||1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill box section |7.1.1 |a| |i||1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill box section |7.1.1 |a| |i||1
Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Chassis leg Corroded inside and out (6.2.2 (d) (i))1
Nearside Rear Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired Inner & Outer Sill (6.2.2 (d) (ii))1
Nearside Front Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired Sill holed (6.2.2 (d) (ii))1
Offside Front Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired Sill holed (6.2.2 (d) (ii))1
Offside Rear Suspension component attachment bracket/mounting corroded and seriously weakened |5.3.3 |b| |i||1
Nearside Rear position lamp|s| not in a clean condition and function impaired |1.1.4a|1
Offside Front Lower Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i))1
Nearside Front Steering locking device missing |2.1.3 |d||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inside wheel arch (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inside wheel arch (7.1.1 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill. (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner + outer sill |7.1.1 |a| |i||1
Power steering component|s| leaking RACK |2.3.3b|1
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded on inner sill |5.2.6|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner body sill |6.1.B.2|1
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer and inner seal (6.2.2 (d) (i))1
Front Headlamp has a product on the lens so that the light output is severely reduced both side (4.1.4 (b))1
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer seels (6.2.2 (d) (i))1
Anti-lock braking system wheel speed sensor missing (1.6 (c))1
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch |front | |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded floor/cross member |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded floor/inner sill |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill near |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill near |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill near |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill near |5.2.6|1
Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner sill holed in multiple places (6.2.2 (d) (i))1
Offside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner sill holed in multiple places (6.2.2 (d) (i))1
Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outter sill / wing holed front and rear (6.2.2 (d) (i))1
Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner sill (6.2.2 (d) (i))1
Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner sill (6.2.2 (d) (i))1
Nearside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering chassis holed from bumper to the subframe (6.1.1 (a) (ii))1
Offside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering chassis holed from bumper to the subframe (6.1.1 (a) (ii))1
Offside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering chassis holed in engine bay (6.1.1 (a) (ii))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under headlight holed (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under headlight holed (6.1.1 (c) (i))1
Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outter sill (6.2.2 (d) (i))1
Offside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outter sill (6.2.2 (d) (i))1
Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting chassis holed in wheel arch (6.2.2 (d) (i))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner /outersill |5.2.6|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength a/r/b bracket (5.3.6 (a) (i))1
Nearside Coil spring fractured or broken (5.3.1 (b) (i))1
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both chasis legs (6.1.1 (c) (i))1
Rear Anti-roll bar linkage insecurely attached both fitted on incorrect side (5.3.3 (a) (i))1
Nearside Rear Suspension arm insecurely attached both upper and lower arms outer bolts loose. (5.3.3 (a) (i))1
Rear Exhaust has a major leak of exhaust gases exhaust joint (6.1.2 (a))1
Central Exhaust has a major leak of exhaust gases exhaust joint (6.1.2 (a))1
Offside Front Integral body structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i||1
Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear of n/s and o/s inner and outer sills (6.2.2 (d) (i))1
Nearside Outer Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Rear Exhaust emissions likely to be affected by an exhaust leak joint between centre and rear exhaust (8.2.1.1 (b))1
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded + outer sills |2.4.A.3|1
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Hole caused by corrosion. |7.1.1 |a| |i||1
Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Hole caused by corrosion. |7.1.1 |a| |i||1
Offside Rear Suspension arm likely to become detached (5.3.3 (a) (ii))1
Nearside Front Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced castle nut |2.4.G.1|1
Offside Front Suspension arm ball joint likely to become detached nut excessivley corroded |5.3.4 |a| |ii||1
Nearside Front Direction indicator incorrect colour Led light unit fitted and flashed white (4.4.3 (a))1
Offside Front Direction indicator incorrect colour Led light unit fitted and flashed white (4.4.3 (a))1
Central Rear Direction indicator incorrect colour LED light strip fitted and flashes red (4.4.3 (a))1
Offside Headlamp levelling device cannot be operated from the drivers seat (4.1.5 (b))1
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits engine misfiring, emmision teste rrefusing to test due to so far out of tolerence (8.2.1.2 (a))1
Headlamp lens seriously defective both front (4.1.1 (b) (ii))1
Centre Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b|1
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))1
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at rear sub frame mounting (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at rear of sub frame mounting (5.3.6 (a) (i))1
Nearside Front Seat belt anchorage prescribed area is inadequately repaired at inner sill section (7.1.1 (a) (i))1
Nearside Front Upper Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Nearside Front Upper Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mount |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mount |5.3.6 |a| |i||1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor pan area |5.3.6 |a| |i||1
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||1
Nearside Body has a sharp edge caused by damage mirror |6.1.C.1|1
Central Exhaust has a major leak of exhaust gases and rear |7.1.2|1
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits 1.10 |7.3.D.3|1
Nearside Inner Seat belt anchorage prescribed area is excessively corroded and outer sill |5.2.6|1
Offside Inner Seat belt anchorage prescribed area is excessively corroded and outer sill |5.2.6|1
Electrical wiring insecure post cat lamda wire incure |1.9.2a|1
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front and rear inner and outer sills |6.1.1 |c| |i||1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front and rear inner and outer sills |6.1.1 |c| |i||1
Nearside Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|1
Offside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))1
Nearside Front Steering locking device missing Bottom ball joint (2.1.3 (d))1
Offside Front Steering locking device missing Bottom ball joint (2.1.3 (d))1
Offside Front Suspension arm worn and seriously weakened |2.4.G.1|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill corroded (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area is excessively corroded sill in various places |5.2.6|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis in various places |6.1.1 |c| |i||1
Nearside Rear Sub-frame attachment bracket/mounting likely to become detached |5.3.3 |a| |ii||1
Offside Rear Sub-frame attachment bracket/mounting likely to become detached |5.3.3 |a| |ii||1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leg |side and underneath| |6.1.B.2|1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/s/r inner sill excessive corrosion (6.2.2 (d) (i))1
Nearside Rear Seat belt anchorage prescribed area is severely distorted Outer sill |5.2.6|1
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i||1
Offside Front Lower Steering locking device ineffective ball joint nut (2.1.3 (d))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and outer sill |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill outer sill |5.3.6 |a| |i||1
Nearside Rear Sub-frame attachment bracket/mounting likely to become detached (5.3.3 (a) (ii))1
Offside Rear Sub-frame attachment bracket/mounting likely to become detached (5.3.3 (a) (ii))1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch holed and corroded (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer Sill. (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer Sill. (5.3.6 (a) (i))1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Sill (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor by subframe. (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing x 3 places (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel archinner wing x 2 places (5.3.6 (a) (i))1
Offside Front Lower Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i))1
Offside Vehicle structure has excessive corrosion which adversely affects braking or steering outer and inner sill |6.1.A.1|1
Vehicle structure has excessive corrosion which adversely affects braking or steering in o/s/r boot floor |6.1.A.1|1
Vehicle structure has excessive corrosion which adversely affects braking or steering both front anti role bar mounts |6.1.A.1|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill to floor |5.2.6|1
Offside Front Seat belt anchorage prescribed area is excessively corroded sill to floor |5.2.6|1
Offside Drivers airbag missing (7.1.5 (a))1
Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded and slight crossion all round |2.4.A.3|1
Nearside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b))1
Offside Rear rear brake recording little or no effort Parking brake |3.7.B.5a|1
Nearside Front Outer Track rod end ball joint has excessive play |2.1.3 |b| |i||1
Offside Rear Anti-roll bar linkage insecure and impairing directional stability broken (5.3.3 (a) (ii))1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings innersill various places |6.1.B.2|1
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ineersill various places |6.1.B.2|1
Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis as marked |5.3.3 |b| |i||1
Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis as marked |5.3.3 |b| |i||1
Emission control equipment missing where fitted as standard catalytic converter (8.2.1.1 (a))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and arch (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mount (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength center chassis mount (5.3.6 (a) (i))1
Offside Front Inner Seat belt anchorage prescribed area is excessively corroded SILL AND JACKING POINT |5.2.6|1
Electrical wiring insecure and connectors likely to become disconnected all under bonnet and in door shuts |4.11 |a| |ii||1
Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced inner sill |6.1.1 |a| |i||1
Rear Exhaust has a major leak of exhaust gases section and centre box |6.1.2 |a||1
Offside Front Upper Suspension arm ball joint excessively worn |5.3.4 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill/floor (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill/floor (7.1.1 (a) (i))1
Central Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill/floor (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer arch (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer arch (7.1.1 (a) (i))1
Nearside Front Inner Brake prescribed area is excessively corroded arch/abs pump mounting (1.1.21 (e) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength boot/floor (5.3.6 (a) (i))1
Rear Lower Suspension arm corroded and seriously weakened both |5.3.3 |b| |i||1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Large hole in wheel arch above anti roll bar mounting area (6.2.2 (d) (i))1
Hazard warning lamps operated by more than one switch |1.4.B.1c|1
Nearside Brake pipe leaking front to rear brake pipe |3.6.A.1|1
Body insecure and dangerous to other road users |6.1.B.1b|1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill and end sill arch (7.1.1 (a) (i))1
Nearside Front Inner Road wheel badly distorted (5.2.2 (c) (i))1
Nearside Anti-roll bar insecure and impairing directional stability |5.3.3 |a| |ii||1
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i||1
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near anti-roll bar mount |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near anti-roll bar mount |5.3.6 |a| |i||1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i||1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i||1
Nearside Rear Body panel corroded and likely to cause injury rear quarter panel |6.2.1 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength antiroll bar mounting |5.3.6 |a| |i||1
Brake performance not tested front suspension corrision (1.2.1 (g))1
Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2|1
Nearside Rear Body has a sharp edge caused by damage light unit |6.1.C.1|1
Offside Obligatory mirror seriously damaged, affecting the rear view wing mirror |8.1.2a|1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner chassis rail (6.2.2 (d) (i))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))1
Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under bonnet both sides chassis marked with yellow (6.2.2 (d) (i))1
Anti-roll bar linkage ball joint excessively worn o/s front (5.3.4 (a) (i))1
Windscreen damaged and affecting the drivers view of the road zone a (3.2 (a) (ii))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting lower sill (6.2.2 (d) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced lower sill (7.1.1 (a) (i))1
Nearside Rear Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering by anti roll bar bracket (6.1.1 (c) (ii))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x3 (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor/inner sill (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor/inner sill (6.1.1 (c) (i))1
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch area (6.1.1 (c) (i))1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch area (6.1.1 (c) (i))1
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits missing cat (8.2.1.2 (a))1
Exhaust emits visible black smoke at idle (8.2.1.2 (f))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail/anti roll bar mounting (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail/anti roll bar mounting (5.3.6 (a) (i))1
Nearside Rear Brake disc significantly and obviously worn inside face (1.1.14 (a) (i))1
Offside Rear Brake disc significantly and obviously worn inside face (1.1.14 (a) (i))1
Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Nearside Rear Anti-roll bar attachment bracket/mounting bolt missing bolt snapped in chassis |2.4.G.1|1
Nearside Rear Parking brake inoperative on one side Also low effort on offside rear. |1.4.1 |a||1
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Both nearside and offside inner wings and chassis rail holed. |6.2.2 |d| |i||1
Offside Rear Lower Suspension arm corroded and seriously weakened Holed. |5.3.3 |b| |i||1
Offside Front Lower Suspension arm ball joint excessively worn Wish bone ball joint. |5.3.4 |a| |i||1
front parking brake recording little or no effort |3.7.B.6a|1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill / sill (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill / sill / inner wing (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/ sill (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under side of chassis - anti roll bar prescribed area (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill - (7.1.1 (a) (i))1
Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii))1
Nearside Front Coil spring fractured or broken broken (5.3.1 (b) (i))1
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))1
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))1
Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2|1
Offside Rear Anti-roll bar linkage damaged and seriously weakened (5.3.3 (b) (i))1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill |2.4.A.3|1
Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill |2.4.A.3|1
Nearside Rear Inner Integral body structure has excessive corrosion which adversely affects braking or steering inner sill corroded and holed (6.1.1 (c) (ii))1
Exhaust has a major leak of exhaust gases REAR EXHAUST BOX DETACHED. (6.1.2 (a))1
Front Body panel insecure FRONT BUMPER NUMBER PLATE LOOSE AND SHARP EDGES. (6.2.1 (a) (i))1
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL. (6.2.2 (d) (i))1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL. (6.2.2 (d) (i))1
Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))1
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL. (6.2.2 (d) (i))1
Brake pipe at imminent risk of failure or fracture main |1.1.11 |a||1
Brake pipe leaking on a hydraulic braking system main |1.1.11 |b| |ii||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under boddy edge (5.3.6 (a) (i))1
Nearside Rear Lower Suspension arm inappropriately repaired WELDING NOT ACCEPTABLE |2.4.A.2|1
Offside Rear Lower Suspension arm inappropriately repaired WELDING NOT ACCEPTABLE |2.4.A.2|1
Offside Rear Upper Suspension arm inappropriately repaired WELDING NOT ACCEPTABLE |2.4.A.2|1
Nearside Front Upper Coil spring not correctly located |2.4.C.2|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced center and rear (7.1.1 (a) (i))1
Exhaust emissions likely to be affected by an exhaust leak lambda too high (8.2.1.1 (b))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced front and rear inner sill / floor (7.1.1 (a) (i))1
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel housing (5.3.6 (a) (i))1
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel housing (5.3.6 (a) (i))1
Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))1
Nearside Front Anti-roll bar linkage has excessive play in a ball joint broken |2.4.G.2|1
Upper Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction suntape sticker (3.1 (a) (ii))1
Nearside Rear Stop lamp(s) light intensity significantly reduced product on lense (4.3.3 (a) (ii))1
Nearside Rear Position lamp has a product on the lens or light source which significantly reduces light intensity (4.2.3 (b) (ii))1
Offside Rear Rear fog lamp light intensity significantly reduced product on lense (4.5.4 (a))1
Offside Rear Stop lamp(s) light intensity significantly reduced product on lense (4.3.3 (a) (ii))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill/floor pan |7.1.1 |a| |i||1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill |7.1.1 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner arch |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner arch |7.1.1 |a| |i||1
Nearside Front Anti-roll bar linkage ball joint likely to become detached detached at top (5.3.4 (a) (ii))1
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/wheelarch (6.1.1 (c) (i))1
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/wheelarch (6.1.1 (c) (i))1
Central Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i))1
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/panel-rear of rear wheelarch (6.1.1 (c) (i))1
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/panel-rear of rear wheelarch (6.1.1 (c) (i))1
Offside Front Lower Anti-roll bar linkage insecure and impairing directional stability Link is broken. |5.3.3 |a| |ii||1
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded outer sill holed |5.2.6|1
Nearside Lower Seat belt anchorage prescribed area is excessively corroded inner floor to sill holed . |5.2.6|1
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded end of floorpan holed x2 . |5.2.6|1
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded inner edge of floorpan holed . |5.2.6|1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))1
Nearside Front Windscreen wiper blade missing |8.2.2|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing. (5.3.6 (a) (i))1
Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis mount. (5.3.3 (b) (i))1
Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis mount to rear of radiator and front. (5.3.3 (b) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill. (7.1.1 (a) (i))1
Offside Front Body panel insecure lower outer wing. (6.2.1 (a) (i))1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/lip |5.3.6 |a| |i||1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing / chassis |5.3.6 |a| |i||1
Offside Rear Service brake lagging in operation LOW (1.2.1 (d))1
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner / outer sill |7.1.1 |a| |i||1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail where the anti roll bar mounts attatch to it |6.1.B.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail where the anti roll bar mounts attatch to it |6.1.B.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hole in floor within 30cm of seat mount |6.1.B.2|1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at offside front (5.3.6 (a) (i))1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point chalked |6.1.B.2|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis under inner wing chalked |6.1.B.2|1
Rear Coil spring fractured or broken both sides (5.3.1 (b) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded by anti roll bar mounting point and front subframe mounting |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis by front subframe mounting |2.4.A.3|1
Exhaust has a major leak of exhaust gases middle exhaust holed (6.1.2 (a))1
Front Upper Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction sun strip fitted (3.1 (a) (ii))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced central sill (7.1.1 (a) (i))1
Offside Rear Shock absorber has an excessively worn shock absorber pivot weak |2.7.4|1
Nearside Rear Coil spring mounting insecure to the extent that relative movement is visible |5.3.1 |a| |ii||1
Offside Rear Coil spring mounting insecure to the extent that relative movement is visible |5.3.1 |a| |ii||1
Nearside Front Suspension component mounting prescribed area is excessively corroded front chassis |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded front chassis |2.4.A.3|1
Nearside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f|1
Fuel cap/sealing device sealing washer missing |7.2.4c|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced center floor (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced center floor (7.1.1 (a) (i))1
Offside Rear Inner Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced center outer sill (7.1.1 (a) (i))1
Nearside Rear Lower Exhaust emissions likely to be affected by an exhaust leak Last exhaust joint leaking excessively (8.2.1.1 (b))1
rear brake recording little or no effort both sides |3.7.B.5a|1
Nearside Floor excessively deteriorated (6.2.4 (a) (i))1
Offside Floor excessively deteriorated (6.2.4 (a) (i))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill. (6.2.2 (d) (i))1
Nearside Rear Direction indicator incorrect colour |4.4.3 |a||1
Stop lamp(s) not working Both rear (4.3.1 (a) (ii))1
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Both rear (6.1.1 (c) (i))1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering subframe mounts |6.1.A.1|1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering subframe mounts |6.1.A.1|1
Nearside Front Service brake grabbing severely |3.7.C.2|1
Offside Rear Suspension component mounting prescribed area is excessively corroded sill corroded |2.4.A.3|1
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Nearside & offside rear, offside front inner sills at floor, both sides outer sills at rear. (6.1.1 (c) (i))1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/ floor pan (6.1.1 (c) (i))1
Offside Front Anti-roll bar linkage ball joint excessively worn droplink (5.3.4 (a) (i))1
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nearside sill at rear |6.1.B.2|1
Brake fluid warning lamp inoperative not working via the handbrake lever |3.6.G.2|1
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))1
Rear Position lamp not working both o/s/r and n/s/r (4.2.1 (a) (ii))1
Nearside Seat belt anchorage prescribed area is excessively corroded sill holed |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded sill holed |5.2.6|1
Offside Front Road wheel fixing loose |5.2.1 |a| |i||1
Offside Front Inner Brake disc contaminated (1.1.14 (b))1
Offside Front Brake performance not tested Rigid brake pipe failed under load. |1.2.1 |g||1
Offside Front Brake pipe leaking on a hydraulic braking system Pipe failed under load. |1.1.11 |b| |ii||1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/r iner sill |6.1.B.2|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner edge (5.3.6 (a) (i))1
Offside Front Anti-roll bar linkage has an unsafe modification (5.3.3 (c) (i))1
Offside Front Suspension component ball joint excessively worn (5.3.4 (a) (i))1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg (6.1.1 (c) (ii))1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg (6.1.1 (c) (ii))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL HOLED (7.1.1 (a) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill |6.2.2 |d| |i||1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill |6.2.2 |d| |i||1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear outer sill |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear outer sill |6.1.B.2|1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch/chassis leg (6.1.1 (c) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch/chassis (6.1.1 (c) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch area (6.1.1 (c) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch area (6.1.1 (c) (i))1
Offside Rear Anti-roll bar linkage insecure ball joint broken |2.4.G.1|1
Offside Front Suspension component mounting prescribed area is excessively corroded inner chassis leg area |2.4.A.3|1
Nearside Front Lower Suspension arm attachment bracket/mounting insecure ball joint bolt (5.3.3 (a) (i))1
Exhaust emissions likely to be affected by an exhaust leak Leaks from front to mid section joint & mid to rear silencer joint combined given excessive air leak on lambda emission test (8.2.1.1 (b))1
Offside Power steering component misaligned Steering rack tie bar distorted (2.1.5 (e) (i))1
Centre Brake pipe leaking |3.6.A.1|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg near anti roll bar inner mount |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg near anti roll bar inner mount |2.4.A.3|1
Tie bar/rod rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid Caliper leaking excessively |1.1.16 |b| |i||1
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid Caliper leaking excessively |1.1.16 |b| |i||1
Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2|1
Exhaust emissions likely to be affected by an exhaust leak middle (8.2.1.1 (b))1
Exhaust has a major leak of exhaust gases middle (6.1.2 (a))1
Offside Rear Shock absorbers damaged to the extent that it does not function (5.3.2 (b))1
Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))1
Offside Inner Seat belt anchorage prescribed area is excessively corroded sill at rear |5.2.6|1
Offside Obligatory mirror insecure dangerous jagerd edges |8.1.1|1
Nearside Front Obligatory mirror missing (3.3 (a))1
Offside Front Obligatory mirror missing (3.3 (a))1
Nearside Front Hydraulic fluid leaking excessively power steering fluid |8.4.1 |a| |i||1
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill front to back |6.2.2 |d| |i||1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis split and corroded |2.4.A.3|1
Nearside Front Subframe mounting prescribed area is excessively corroded CHASSIS RAIL |2.4.A.3|1
Offside Front Subframe mounting prescribed area is excessively corroded CHASSIS RAIL |2.4.A.3|1
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded WHEEL ARCH |2.4.A.3|1
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both rear arches corroded |6.1.1 |c| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded |6.1.1 |c| |i||1
Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at anti roll bar mount (5.3.6 (a) (i))1
Nearside Front Lower Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected chasis leg (5.3.6 (a) (ii))1
Offside Front Lower Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected chasis leg at anti-roll bar mount (5.3.6 (a) (ii))1
Nearside Front Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength SILL |5.3.6 |a| |i||1
Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength SILL |5.3.6 |a| |i||1
Offside Front Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength SILL |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))1
Nearside Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))1
Front Headlamp has a product on the lens so that the light output is severely reduced Both front (4.1.4 (b))1
Rear Emissions not tested broken exhaust centre silencer |7.3.A.1|1
Offside Front Horn not working (7.7 (a))1
Nearside Front Shock absorbers insecurely attached (5.3.2 (a) (i))1
Central Front Lower Hydraulic fluid leaking excessively (8.4.1 (a) (i))1
Offside Front Road wheel fixing missing |5.2.1 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner and outter sill |5.2.6|1
Engine MIL inoperative or indicates a malfunction EML not illuminating. petrol vehicles including hybrids with 4 or more wheels, not more than 8 passenger seats in addition to the driver???s seat and first used on or after 1 July 2003 EML must illuminate and go out (8.2.1.2 (h))1
Nearside Rear Hydraulic brake calliper leaking Brake fluid leaking from the handbrake pivot (1.1.16 (b) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area - marked with chalk (7.1.1 (a) (i))1
Exhaust has a major leak of exhaust gases cat join (6.1.2 (a))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area - marked with chalk (7.1.1 (a) (i))1
Nearside Rear Coil spring fractured or broken Spring broken |5.3.1 |b| |i||1
Offside Rear Coil spring fractured or broken Spring broken |5.3.1 |b| |i||1
Front Upper Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b|1
Rear Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under sill |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under sill |6.1.B.2|1
Nearside Front Seat belt anchorage loose |7.1.1 |b||1
Offside Front Seat belt anchorage loose |7.1.1 |b||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sills |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sills |7.1.1 |a| |i||1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor to sill |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner wheel arch |7.1.1 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner wheel arch |7.1.1 |a| |i||1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill, corroded and holed (7.1.1 (a) (i))1
Emissions not tested aux belt going to fail " HEAVILY FRAYED " |8.2.1.2 |d||1
Nearside Body mounting fixings insecure sill becoming detached from the floor of the vehicle. (6.2.2 (c) (i))1
Offside Front Lower Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|1
Nearside Front Lower Vehicle structure has excessive corrosion which adversely affects braking or steering Floor |6.1.A.1|1
Nearside Rear Body has a sharp edge caused by corrosion sill |6.1.C.1|1
Offside Rear Body has a sharp edge caused by corrosion inner sill |6.1.C.1|1
Nearside Rear Suspension rod corroded and seriously weakened (5.3.3 (b) (i))1
Offside Rear Suspension rod corroded and seriously weakened (5.3.3 (b) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sill (7.1.1 (a) (i))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner Sill (6.2.2 (d) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded floor |5.2.6|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassie leg |6.1.B.2|1
Offside Front Headlamp flickers when tapped lightly by hand |1.2.4c|1
Seat belt anchorage prescribed area is excessively corroded both rear inner sills |5.2.6|1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced undersill (7.1.1 (a) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill. (6.1.1 (c) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill. (6.1.1 (c) (i))1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front & central inner sill/floor pan |6.1.B.2|1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front & central inner sill/floor pan |6.1.B.2|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced jacking point inner and outer sill (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced jacking point inner and outer sill (7.1.1 (a) (i))1
Front front brake binding both o/s stuck on |3.7.B.1|1
Nearside Rear Suspension arm insecure and impairing directional stability L ower Camber - Caster Arm (5.3.3 (a) (ii))1
Rear Coil spring fractured or broken OS & NS (5.3.1 (b) (i))1
Nearside Rear Suspension arm damaged and seriously weakened Top Control Arm (5.3.3 (b) (i))1
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheelarch |6.2.2 |d| |i||1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor pan to sill |6.2.2 |d| |i||1
Rear Exhaust has a major leak of exhaust gases silencer emissions not tested |6.1.2 |a||1
Nearside Parking brake inoperative on one side parking brake nill (1.4.1 (a))1
Brake lever has insufficient reserve travel excessive handbrake lever travel (1.1.2 (a))1
Brake performance unable to be tested due to fluid leak (1.2.1 (g))1
Offside Rear Brake pipe leaking on a hydraulic braking system into flex (1.1.11 (b) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg visible under wheelarch (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheelarch at top (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill panel (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheelarch at top (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill/ inner sill (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill /inner sill (7.1.1 (a) (i))1
Front Position lamp not working Both Nearside & Offside |4.2.1 |a||1
Offside Rear Lower Suspension arm corroded and seriously weakened holed (5.3.3 (b) (i))1
Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front chassis (6.1.1 (c) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor by bumper (6.1.1 (c) (i))1
Braking system leaking front to rear brake pipe burst due to corrosion |3.6.A.1|1
Offside Body has a sharp edge caused by damage door mirror |6.1.C.1|1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill & surrounding area (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii))1
Offside Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))1
Front Brake performance unable to be tested front chassis legs unstable (1.2.1 (g))1
Central Emissions unable to be completed exhaust leak (8.2.1.2 (d))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Next to wishbone mounting (5.3.6 (a) (i))1
Rear Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii||1
Nearside Front Anti-roll bar ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner flitch/ inner top of wheel arch (6.2.2 (d) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near anti roll bar bracket (5.3.6 (a) (i))1
Front Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a))1
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/floor (6.1.1 (c) (i))1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/floor (6.1.1 (c) (i))1
Rear Exhaust has a major leak of exhaust gases silencer joint corroded (6.1.2 (a))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill to floor corroded and holed (7.1.1 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner & outer sill area |5.3.6 |a| |i||1
Offside Front Anti-roll bar insecure and impairing directional stability |5.3.3 |a| |ii||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis | x2 places| |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill holed & corroded (5.3.6 (a) (ii))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced holed and corroded (6.1.1 (c) (i))1
Brake performance not tested brake pipe burst before brake test could be carried out (1.2.1 (g))1
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill |5.3.6 |a| |ii||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i||1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/boot floor |6.1.1 |c| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Sill Corroded (7.1.1 (a) (i))1
Nearside Rear All position lamps adversely affected by the operation of another lamp |1.1.A.3f|1
Offside Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e|1
Exhaust emissions likely to be affected by an exhaust leak Middle /rear join blowing. (8.2.1.1 (b))1
Offside Front Brake prescribed area is excessively corroded pedal controls |1.1.21 |e| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mounting upper wheel arch |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mounting upper wheel arch |5.3.6 |a| |i||1
Nearside Headlamp light source and lamp not compatible HID fitted (4.1.4 (c))1
Offside Headlamp light source and lamp not compatible HID fitted (4.1.4 (c))1
Offside Front Anti-roll bar linkage ball joint likely to become detached Detached (5.3.4 (a) (ii))1
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Within seat belt anchorage point prescribed area (6.1.1 (c) (i))1
Offside Rear Hand operated control valve leaking |1.1.5 |c||1
Offside Rear Outer Body has a projection caused by corrosion sill |6.1.C.1|1
Offside Front Anti-roll bar linkage likely to become detached detached (5.3.3 (a) (ii))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill chalked (7.1.1 (a) (i))1
Offside Front Subframe mounting prescribed area is excessively corroded chassis section |2.4.A.3|1
Nearside Front Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3|1
Exhaust has a major leak of exhaust gases centre and rear boxes |7.1.2|1
Seat belt anchorage prescribed area is excessively corroded nsr and osr sills |5.2.6|1
Suspension component mounting prescribed area is excessively corroded nsf and osf chassis |2.4.A.3|1
Seat belt anchorage prescribed area is excessively corroded osr sill |5.2.6|1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i||1
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Both Outer Chassis Legs |6.1.1 |c| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength roll bar/upper suspension arm mounting area (5.3.6 (a) (i))1
Nearside Front Road wheel fixing missing and offside front (5.2.1 (a) (i))1
Nearside Rear Road wheel fixing missing and offside rear (5.2.1 (a) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis |30cm from anti roll mount| |6.2.2 |d| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill corrosion (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill corrosion (7.1.1 (a) (i))1
Offside Rear Parking brake inoperative on one side low effort |1.4.1 |a||1
Offside Rear Body component corroded and likely to cause injury sill holed corroded (6.2.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced drop sill corroded (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced drop sill corroded (7.1.1 (a) (i))1
Offside Rear Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg under wheel arch (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg under wheel arch (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger end / under sill / floor (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg under drivers floor (5.3.6 (a) (i))1
Offside Front Hydraulic fluid leaking excessively (8.4.1 (a) (i))1
Headlamp aim not tested Offside and nearside (4.1.2 (b))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside and nearside rear sill to floir (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at subframe mounting (5.3.6 (a) (i))1
Offside Seat belt anchorage prescribed area is excessively corroded at outer sill |5.2.6|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded at outer sill |2.4.A.3|1
Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced at outer sill |corroded| |7.1.1 |a| |i||1
Offside Front Service brake excessively binding and both rear |1.2.1 |f||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill / closing panel / floor |5.3.6 |a| |i||1
Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis legs both sides |5.3.6 |a| |i||1
Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner and outter sill |6.2.2 |d| |ii||1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/s & o/s front chassis welding insufficient |6.2.2 |d| |i||1
Engine MIL inoperative or indicates a malfunction engine fault light (8.2.1.2 (h))1
Front Sub-frame insecurely attached mounting bolts missing (5.3.3 (a) (i))1
Steering wheel retaining device insecure x3 bolts missing |2.1.6|1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected floor (5.3.6 (a) (ii))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear wheel arch (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear wheel arch (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))1
Nearside Rear Subframe mounting prescribed area is excessively corroded sill |2.4.A.3|1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength flinch |5.3.6 |a| |i||1
Offside Front Seat belt anchorage prescribed area is excessively corroded chassis under drivers seat |5.2.6|1
Offside Rear Hand operated control valve malfunctioning (1.1.5 (d))1
Exhaust emissions likely to be affected by an exhaust leak minor leak (8.2.1.1 (b))1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill marked with chalk (6.2.2 (d) (i))1
Front Position lamp not working both |4.2.1 |a||1
Headlamp light intensity severely reduced (4.1.4 (a))1
Brake performance unable to be tested brake pipe leaking (1.2.1 (g))1
Nearside Rear Upper Suspension component mounting prescribed area fractured significantly reducing structural strength upper inner wheel arches (5.3.6 (a) (i))1
Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper inner arch (5.3.6 (a) (i))1
Seat belt anchorage prescribed area is excessively corroded Nearside rear floor to sill |5.2.6|1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting underseal (6.2.2 (d) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing at chassis |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing at chassis |5.3.6 |a| |i||1
Nearside Direction indicator not working |1.4.A.2c|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail holed and corroded where anti roll bar D bushes mount (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail holed and corroded where anti roll bar D bushes mount (5.3.6 (a) (i))1
Central Rear Exhaust shield missing where fitted as original equipment creating a risk of fire re-attatched (6.1.3 (e))1
Nearside Headlamp aim projected beam image is obviously incorrect buffed lens (4.1.2 (c))1
Offside Headlamp aim projected beam image is obviously incorrect buffed lens (4.1.2 (c))1
Offside Front Suspension component mounting prescribed area is excessively corroded suspension arm mount |2.4.A.3|1
Central Exhaust has a major leak of exhaust gases flange (6.1.2 (a))1
Prop shaft securing bolt loose (6.1.7 (a) (i))1
Prop shaft securing bolt missing (6.1.7 (a) (i))1
Rear Integral body structure is fractured and structural rigidity is significantly reduced Chassis rails (6.1.1 (a) (i))1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear (5.3.6 (a) (i))1
Front Sub-frame attachment bracket/mounting insecure rear bolts missing (5.3.3 (a) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis end/boot floor (6.1.1 (c) (i))1
Nearside Rear Anti-roll bar has excessive play in a pin/bearing |2.4.G.2|1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sil (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sil (7.1.1 (a) (i))1
Headlamp insecure nearside front|broken| |1.7.3|1
Position lamp not working both front side lights (4.2.1 (a) (ii))1
Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction satnav |3.1 |a| |ii||1
Offside Seat belt anchorage prescribed area is excessively corroded floor section |5.2.6|1
Exhaust has a major leak of exhaust gases at center section to backbox |6.1.2 |a||1
Supplementary restraint system warning lamp indicates a fault Airbag warning (7.1.6 (a))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Jacking point (6.2.2 (d) (i))1
Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Jacking point (6.2.2 (d) (i))1
Front brake disc insecure |3.5.1i|1
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded chassis rail. |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced underfloor sill end (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced underfloor sill end (7.1.1 (a) (i))1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floorpan (5.3.6 (a) (i))1
Front Front position lamp|s| not in good working order |function impaired| |1.1.4a|1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis at front roll bar mounting (5.3.6 (a) (ii))1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis at roll bar mounting (5.3.6 (a) (ii))1
Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan (7.1.1 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing adjacent to upper spring seat |5.3.6 |a| |i||1
Brake performance unable to be tested DUE BRAKE PIPE LEAKING (1.2.1 (g))1
Nearside Front Lower Bumper insecure wing to sill |6.1.4 |a| |i||1
Centre Exhaust has a major leak of exhaust gases Temp repair. |7.1.2|1
Nearside Rear Outer brake disc in such a condition that it is seriously weakened |3.5.1i|1
Offside Front coil spring broken AT BASE |2.4.C.1a|1
Offside Rear coil spring broken AT TOP |2.4.C.1a|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings FLOOR AREAS |6.1.B.2|1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill several places (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded floor/sill under vehicle |2.4.A.3|1
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded And outer |2.4.A.3|1
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded And outer |2.4.A.3|1
Rear Suspension component mounting prescribed area is inadequately repaired Both sill |2.4.A.3|1
Nearside Headlamp excessively deteriorated so that the light output is severely reduced dim |1.7.5a|1
Offside Front Suspension component mounting prescribed area is excessively corroded @brake pipe |2.4.A.3|1
Emissions not tested catalitic converter missing (8.2.1.2 (d))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced n/s inner sill hole within 30cm of seat mount and seat belt buckle (7.1.1 (a) (i))1
Nearside Rear Brake pipe leaking on a hydraulic braking system over axle (1.1.11 (b) (ii))1
Brake performance not tested brake pipe burst (1.2.1 (g))1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floorpan (6.2.2 (d) (i))1
front parking |secondary| brakes imbalanced Discs & pads required |3.7.B.6b|1
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings osf chassis |6.1.B.2|1
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ns outer sill |6.1.B.2|1
Front Headlamp aim beam image too far to the right |1.6.B4|1
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill within seat belt anchorage (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis |inner wing| |5.3.6 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced SILL. (7.1.1 (a) (i))1
Service brake excessively binding ALL,FRONT AND REAR BRAKES (1.2.1 (f))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill front and rear (7.1.1 (a) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill within 30cm of seat mount |6.1.1 |c| |i||1
Nearside Rear Integral body structure is fractured and structural rigidity is significantly reduced Sill within 30cm of seat mount |6.1.1 |a| |i||1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill corrosion (7.1.1 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill corrosion (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill corrosion (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill corrosion (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill corrosion (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill corrosion (7.1.1 (a) (i))1
Nearside Front Anti-lock braking system component missing sensor (1.6 (e))1
Nearside Integral body structure is fractured and structural rigidity is significantly reduced centre (6.1.1 (a) (i))1
Nearside Front Anti-roll bar corroded and seriously weakened (5.3.3 (b) (i))1
Offside Front Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction Device holder glued to windscreen |3.1 |a| |ii||1
Offside Front Headlamp aim projected beam image is obviously incorrect Bulb in wrong |4.1.2 |c||1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg holed |6.1.1 |c| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg holed |6.1.1 |c| |i||1
Offside Front Floor excessively deteriorated holed |6.2.4 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced middle sill area holed |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area holed |7.1.1 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area holed |7.1.1 |a| |i||1
Nearside Front Upper Suspension arm ball joint excessively worn |5.3.4 |a| |i||1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected front wishbone mount area Excessively holed and corroded |5.3.6 |a| |ii||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Anti roll bar attachment area Holed and corroded |5.3.6 |a| |i||1
Nearside Lower Seat belt anchorage prescribed area is inadequately repaired |5.2.6|1
Offside Lower Seat belt anchorage prescribed area is inadequately repaired |5.2.6|1
Rear Service brake excessively fluctuating both sides (1.2.1 (e))1
Nearside Stop lamp not working RENEW BULB |1.2.1b|1
Nearside Rear Lower Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3|1
Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i))1
Nearside Rear Upper Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Front Brake pipe stretched |found during steering lock to lock check| |2.2.D.2b|1
Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i||1
Offside Front Floor excessively deteriorated lower A post |6.2.4 |a| |i||1
Nearside Rear Tie bar/rod attachment bracket/mounting fractured |2.4.G.1|1
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt Upper & Lower (5.3.4 (b) (ii))1
Exhaust carbon monoxide content at idle exceeds manufacturers specified limits co 4.5 % (8.2.1.2 (b))1
Rear Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement no access too fuel cap /// |7.2.4b|1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill /// |6.1.B.2|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded (7.1.1 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded (7.1.1 (a) (i))1
Brake pipe leaking on a hydraulic braking system front to rear pipe (1.1.11 (b) (ii))1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner/outer sill. |6.1.B.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner/outer sill. |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill. |6.1.B.2|1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor holed (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Wheel Arch (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Wheel Arch (7.1.1 (a) (i))1
Offside Front Rear fog lamp not working |1.3.2b|1
Rear Exhaust has a part missing |7.1.1a|1
Centre Exhaust has a major leak of exhaust gases flange joint |7.1.2|1
Emission control equipment obviously defective pipe from carbon canister broke (8.2.1.1 (a))1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg [roll bar mounting] (6.1.1 (c) (ii))1
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/floor marked |6.1.1 |c| |i||1
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/floor marked |6.1.1 |c| |i||1
Front Vehicle structure has excessive corrosion which adversely affects braking or steering Both (6.1.1 (c) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at anti roll bar mounts (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at anti roll bar mounts (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected anti roll bar mtn |5.3.6 |a| |ii||1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected anti roll bar mtn |5.3.6 |a| |ii||1
Rear Lower Suspension arm corroded and seriously weakened both sides (5.3.3 (b) (i))1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))1
Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen both sides (3.5 (a))1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassi leg (5.3.6 (a) (ii))1
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (holed (6.1.1 (c) (i))1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis box section |6.1.B.2|1
Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing chassis (6.2.2 (d) (i))1
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing chassis (6.2.2 (d) (i))1
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill section (6.2.2 (d) (i))1
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill section (6.2.2 (d) (i))1
Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill section both sides (6.2.2 (d) (i))1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill corroded (7.1.1 (a) (i))1
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i))1
Offside Front Integral body structure is fractured and structural rigidity is significantly reduced corroded by jacking point (6.1.1 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear of sill and inner wheel arch |7.1.1 |a| |i||1
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2|1
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2|1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill |6.1.1 |c| |i||1
Nearside Front Subframe mounting prescribed area is excessively corroded under floor |2.4.A.3|1
Nearside Lower Seat belt anchorage prescribed area is excessively corroded body sill |5.2.6|1
Offside Lower Seat belt anchorage prescribed area is excessively corroded body sill |5.2.6|1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER WING BEHIND HEADLIGHT (6.2.2 (d) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OUTER AND INNER SILLS (6.2.2 (d) (i))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER AND OUTER SILLS (6.2.2 (d) (i))1
Offside Front Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired CHASSIS RAIL (6.2.2 (d) (ii))1
Nearside Front Anti-roll bar linkage insecurely attached BROKEN (5.3.3 (a) (i))1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering outer and inner seals |6.1.A.1|1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner and outer seals |6.1.A.1|1
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner and outer seals |6.1.A.1|1
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner and outer seals |6.1.A.1|1
Nearside Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2|1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings upper seal |6.1.B.2|1
Nearside Seat belt anchorage prescribed area is excessively corroded OUTER SILL |5.2.6|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti-roll bar mount (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti-roll bar mount (5.3.6 (a) (i))1
Nearside Front Position lamp showing red light to the front |4.2.3 |a| |ii||1
Offside Front Position lamp showing red light to the front |4.2.3 |a| |ii||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced backing sill/floor (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced backing sill/floor (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner arch (5.3.6 (a) (ii))1
Nearside Rear Seat belt anchorage likely to become detached in the event of a collision inner arch (7.1.1 (a) (ii))1
Offside Rear Seat belt anchorage likely to become detached in the event of a collision inner arch (7.1.1 (a) (ii))1
Offside Rear Suspension component mounting prescribed area is excessively corroded inner seal corroded |2.4.A.3|1
Nearside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis near top suspension arm mount (6.1.1 (c) (i))1
Nearside Rear Anti-roll bar linkage ball joint excessively worn Link pin broken off (5.3.4 (a) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near suspension arm component |6.1.1 |c| |i||1
Offside Rear Brake hose excessively damaged (1.1.12 (b) (ii))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch to boot (6.1.1 (c) (i))1
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced SILL AREA. |7.1.1 |a| |i||1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced LOWER WHEEL ARCH AREA. |7.1.1 |a| |i||1
Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced SILL AREA. |7.1.1 |a| |i||1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced WHEEL ARCH AREA. |7.1.1 |a| |i||1
Nearside Front Lower Body panel likely to become detached REAR WING (6.2.1 (a) (ii))1
Offside Front Lower Body panel insecure REAR WING (6.2.1 (a) (i))1
Offside Front Inner Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced LOWER SILL /OUTER RIGGER AREA. (6.1.1 (b) (ii))1
Offside Rear Braking system leaking Caliper |3.6.A.1|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis / underside (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above anti roll bar mounting bracket (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above anti roll bar mounting bracket (5.3.6 (a) (i))1
Rear Service brake excessively fluctuating NS & OS (1.2.1 (e))1
Offside Front Inner Brake fluid significantly below minimum mark (1.1.10 (d) (ii))1
Offside Front Position lamp not working side (4.2.1 (a) (ii))1
Nearside Front Upper Macpherson strut attachment bracket/mounting insecure and impairing directional stability nuts loose (5.3.3 (a) (ii))1
Offside Front Upper Macpherson strut attachment bracket/mounting insecure and impairing directional stability nuts loose (5.3.3 (a) (ii))1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected in front of the x member (5.3.6 (a) (ii))1
Offside Front Suspension component mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected in front of the x member (5.3.6 (a) (ii))1
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid caliper |1.1.16 |b| |i||1
Offside Suspension component mounting prescribed area is excessively corroded Outer Sill |2.4.A.3|1
Nearside Suspension component mounting prescribed area is excessively corroded Outer Sill |2.4.A.3|1
Nearside Seat belt anchorage prescribed area is excessively corroded Outer sill area /previous repair |5.2.6|1
Centre Rear engine mounting bracket insecure and likely to fail diff mounting |6.1.D.1b|1
Nearside Seat belt anchorage prescribed area is excessively corroded rear section of outer sill |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded rear section of outer sill |5.2.6|1
Nearside Seat belt anchorage prescribed area is excessively corroded rear section of floor as it adjoins the sill |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded within prescribed area (7.1.1 (a) (i))1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced 2 places (7.1.1 (a) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i))1
Offside Rear Service brake grabbing severely |1.2.1 |c||1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed |7.1.1 |a| |i||1
Battery insecure and likely to fall from carrier corroded and holed |4.13 |a| |ii||1
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner cill corroded (7.1.1 (a) (i))1
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded (6.1.1 (c) (i))1
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced boot floor corroded in 2 places (6.1.1 (c) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded |7.1.1 |a| |i||1
Nearside Front Steering retaining device missing split pin missing from track rod end |2.2.C.1g|1
Nearside Front Front suspension locking device missing split pin missing from lower ball joint nut |2.5.A.4|1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering bottom of chassis rail |6.1.A.1|1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering bottom of chassis rail |6.1.A.1|1
Outer Rear brake disc excessively pitted |3.5.1h|1
Nearside Rear Lower Body has a sharp edge caused by corrosion |6.1.C.1|1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected subframe mount (5.3.6 (a) (ii))1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected subframe mount (5.3.6 (a) (ii))1
Offside Rear Suspension component mounting prescribed area is excessively corroded outter sill |2.4.A.3|1
Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill excessively corroded (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill corroded through (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner wheel well corroded through (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill. (7.1.1 (a) (i))1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill/arch (7.1.1 (a) (i))1
Nearside Front Subframe mounting prescribed area is excessively corroded Chassis rail |2.4.A.3|1
Offside Rear Coil spring missing and directional control affected control will be affected |5.3.1 |c| |ii||1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassiss |5.3.6 |a| |ii||1
Nearside Front Service brake has no recorded effort at a wheel |1.2.1 |a| |ii||1
Front Brake disc significantly and obviously worn warped discs, felt through brake pedal (1.1.14 (a) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor |6.1.1 |c| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor |6.1.1 |c| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength roll bar |5.3.6 |a| |i||1
Nearside Front Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced arch/sill |7.1.1 |a| |i||1
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/arch |7.1.1 |a| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail inner arch |6.1.1 |c| |i||1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Side sill |5.3.6 |a| |i||1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Side sill |5.3.6 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer side sill |7.1.1 |a| |i||1
Nearside Front Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance side light very dim |1.1.A.3d|1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis |6.1.A.1|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer cill (7.1.1 (a) (i))1
Central Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))1
Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii||1
Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii||1
Nearside Front Inner Seat belt anchorage prescribed area is inadequately repaired and outer sill panel |7.1.1 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mount/subframe mount |5.3.6 |a| |i||1
Stop lamp(s) not working both (4.3.1 (a) (ii))1
Nearside Track rod end ball joint worn to the extent there is a serious risk of detachment |2.1.3 |b| |ii||1
Offside Rear Exhaust has a major leak of exhaust gases missing |6.1.2 |a||1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis next to upper wishbone |2.4.A.3|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Under sill. (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing. (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch. (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Under sill corroded. (7.1.1 (a) (i))1
Nearside Front Lower Torsion bar excessive play at an end fixing |2.4.E.2|1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis corroded / holed (6.1.1 (c) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill corroded/holed (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill corroded /holed (5.3.6 (a) (i))1
Central Seat belt anchorage prescribed area strength or continuity significantly reduced offside (7.1.1 (a) (i))1
Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2|1
Nearside Body has a sharp edge caused by corrosion |6.1.C.1|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis and inner wing |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis and inner wing |5.3.6 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch area |7.1.1 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch area |7.1.1 |a| |i||1
Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner / outer sill |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded Inner / outer sill |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded Chassis near anti-roll bar mount |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded Chassis near anti-roll bar mount |2.4.A.3|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s front inner wing |6.1.B.2|1
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s front chassis rail |6.1.B.2|1
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s front chassis rail |6.1.B.2|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s rear sill |6.1.B.2|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s rear sill |6.1.B.2|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s rear inner sill |6.1.B.2|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s rear inner sill |6.1.B.2|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s floor to sill |6.1.B.2|1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))1
Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced OUTER SILL (6.1.1 (c) (i))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced OUTER FRONT SILL (6.1.1 (c) (i))1
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering floorpan (6.1.1 (c) (ii))1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill (6.1.1 (c) (ii))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced OUTER SILL (7.1.1 (a) (i))1
Braking system leaking Centre pipe to rear |3.6.A.1|1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis member to sill . body filler used as a repair |6.1.1 |c| |i||1
Offside Front Wheel bolt|s| loose all wheel bolts loose |4.2.A.1e|1
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt ball joint dust cover split |2.4.G.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill has a hole caused by excessive corrosion |6.1.B.2|1
Offside Front Anti-roll bar linkage fractured detatched |5.3.3 |b| |ii||1
Offside Rear Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3|1
Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch holed and corroded |6.1.B.2|1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill x3 (7.1.1 (a) (i))1
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill x 1 (7.1.1 (a) (i))1
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill x 1 (7.1.1 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s/f and o/s/f chassis near mount brackets for ARB (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER WING UNDER BONNET (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIE LEG (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIE LEG (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL X2 (7.1.1 (a) (i))1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength WHEEL ARCH (5.3.6 (a) (i))1
Rear Suspension component mounting prescribed area is excessively corroded inner sills |2.4.A.3|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength previous poor repair |5.3.6 |a| |i||1
Nearside Front Tie bar/rod fractured |2.4.G.1|1
Nearside Seat belt anchorage prescribed area is excessively corroded under sill & floor |5.2.6|1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sills |6.1.1 |c| |i||1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill |6.1.1 |c| |i||1
Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|1
Exhaust has a major leak of exhaust gases center pipe (6.1.2 (a))1
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill to floor (5.3.6 (a) (ii))1
Offside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected mid sill to floor (5.3.6 (a) (ii))1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch to sill (5.3.6 (a) (i))1
Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected chassis box section mark yellow (5.3.6 (a) (ii))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced innersill (7.1.1 (a) (i))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength innersill (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded jacking point |2.4.A.3|1
Offside Front Anti-roll bar linkage pin or bush likely to become detached |5.3.4 |a| |ii||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/inner sill |5.3.6 |a| |i||1
Nearside Body has a sharp edge caused by damage door mirror casing |6.1.C.1|1
Front Headlamp has a product on the lens so that the light output is severely reduced Both (4.1.4 (b))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top suspension arm mount (5.3.6 (a) (i))1
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension arm mount (5.3.6 (a) (i))1
Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced top roll bar mounts (6.1.1 (c) (i))1
Nearside Rear Inner Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i))1
Offside Rear Inner Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i))1
Nearside Rear Anti-roll bar cracked |2.4.G.1|1
Nearside Front Position lamp not working poor connection (4.2.1 (a) (ii))1
Rear Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii))1
Offside Front Suspension component mounting prescribed area is excessively corroded inner wing/chassis rail |2.4.A.3|1
Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))1
Nearside Front Brake lining|s| less than 1.5 mm thick |1.1.13 |a| |ii||1
Offside Front Brake lining|s| less than 1.5 mm thick |1.1.13 |a| |ii||1
Rear Braking system leaking |3.6.A.1|1
Battery insecure and likely to fall from carrier battery carrier on offside rear corroded (4.13 (a) (ii))1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor/inner sill marked in chalk (6.1.1 (c) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch inner sill marked in chalk (6.1.1 (c) (i))1
Nearside Rear Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii))1
Offside Body panel corroded and likely to cause injury rear wheel arch (6.2.1 (a) (i))1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner front cill |6.1.1 |c| |i||1
Offside Front All position lamps not working Side light |4.2.1 |a||1
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill badly corroded near the belt mounting (7.1.1 (a) (i))1
Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rust holed near suspension mount just behind the front subframe (5.3.6 (a) (i))1
Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rust holed near suspension mount, just behind the front subframe (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area fractured significantly reducing structural strength floor within 30cm of subframe mount (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor within 30cm of subframe mount (5.3.6 (a) (i))1
Exhaust emissions likely to be affected by an exhaust leak failed test (8.2.1.1 (b))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced marked in yellow (6.1.1 (c) (i))1
Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (outer sill) (7.1.1 (a) (i))1
Nearside Front Steering rack has excessive free play detected at the steering wheel (steering rack fitted) rack arm (2.3 (a) (i))1
Offside Front Front position lamp|s| not working sidelight |1.1.A.3b|1
Offside Rear Brake pipe leaking on a hydraulic braking system chassis pipe (1.1.11 (b) (ii))1
Rear Rear wheel bearing rough when rotated |2.6.1|1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis excessivley corroded above anti roll bar mounts (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis badly corroded and holed above anti roll bar mount (6.1.1 (c) (i))1
Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing |6.1.B.2|1
Exhaust has a major leak of exhaust gases middle pipe/rear box |7.1.2|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced door sill (7.1.1 (a) (i))1
Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced and inner sills corroded (6.1.1 (c) (i))1
Rear Exhaust system not adequately supported mounting |7.1.1|1
Hydraulic brake cylinder leaking hydraulic fluid off side rear caliper (1.1.16 (b) (i))1
Offside Rear Anti-roll bar linkage fractured corroded/ broken away from suspension mounting |2.4.G.1|1
Front position lamp|s| not working x2 |1.1.A.3b|1
Emissions not tested oil level below minimum |7.3.A.1|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill/arch |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill not seam welded |5.2.6|1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside outer seal |5.3.6 |a| |i||1
Seat belt retracting mechanism defective drivers side front belt |5.2.5b|1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near side outer sill (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength off side outer sill (5.3.6 (a) (i))1
Nearside Front Lower Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))1
Offside Front Lower Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill holed (7.1.1 (a) (i))1
Nearside Rear Suspension component mounting prescribed area is inadequately repaired near suspension arm (5.3.6 (a) (i))1
Nearside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear sill inner outer (6.2.2 (d) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear sill inner outer (6.2.2 (d) (i))1
Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2|1
Offside Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a|1
Offside Front Lower Macpherson strut pin or bush excessively worn (5.3.4 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced cill holed (7.1.1 (a) (i))1
Vehicle structure is fractured and structural rigidity is significantly reduced both front chassis legs (6.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail holed above anti - roll bar |5.3.6 |a| |i||1
Suspension component mounting prescribed area is excessively corroded offside & nearside rear |2.4.A.3|1
Exhaust has a major leak of exhaust gases centre/rear pipe |6.1.2 |a||1
Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded/holed within 30cm of seatbelt anchorage (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch corroded/holed within suspension mounting point (5.3.6 (a) (i))1
Engine MIL inoperative or indicates a malfunction Light illuminated indicating fault (8.2.1.2 (h))1
Nearside Rear Exhaust emissions likely to be affected by an exhaust leak joint area (8.2.1.1 (b))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor to inner sill (6.2.2 (d) (i))1
Front Service brake grabbing severely (1.2.1 (c))1
Rear Exhaust has a major leak of exhaust gases gasket needed at rear |7.1.2|1
Emissions not tested eml light on (8.2.1.2 (d))1
Nearside Front Inner Anti-roll bar attachment bracket/mounting insecure and impairing directional stability bolt missing from clamp and both inner wheel arch bolts snapped off in chassis rail (5.3.3 (a) (ii))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength complete chassis rail corroded and holed (5.3.6 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))1
Offside Front Shock absorbers likely to become detached lower shock mount corroded (5.3.2 (a) (ii))1
Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill panel |6.1.B.2|1
Offside Rear Suspension component mounting prescribed area is inadequately repaired heavy duty tape concealing hole |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is inadequately repaired heavy duty used to conceal hole |2.4.A.3|1
Offside Front Seat belt anchorage prescribed area is inadequately repaired rear outer sill |5.2.6|1
Central Front Inner Parking brake lever has excessive movement indicating incorrect adjustment |1.1.6 |c||1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength to outer sill (5.3.6 (a) (i))1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/arch (5.3.6 (a) (i))1
Offside Front Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6|1
Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii||1
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt top |5.3.4 |b| |ii||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL CORRODED (7.1.1 (a) (i))1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg above anti roll bar |6.1.A.1|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))1
Windscreen in such a condition that visibility through swept area is seriously affected |3.2 |c| |ii||1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill area corroded beyond outer wing panel (7.1.1 (a) (i))1
Offside Front Seat belt anchorage prescribed area is excessively corroded outer body seal |5.2.6|1
Nearside Front Service brake excessively binding unable to rotate wheel freely to check wheel bearing (1.2.1 (f))1
Nearside Front Macpherson strut insecurely attached (5.3.3 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by anti roll bar bracket (5.3.6 (a) (i))1
Emissions not tested catalyst missing excessive exhaust leak (8.2.1.2 (d))1
Front Bumper insecure |6.1.4 |a| |i||1
Nearside Rear Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii||1
Exhaust has a major leak of exhaust gases tail pipe missing (6.1.2 (a))1
Emissions not tested tail pipe missing and not catalyst fitted (8.2.1.2 (d))1
Central Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area is inadequately repaired chassi outrigger not seam welded (5.3.6 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill centre (7.1.1 (a) (i))1
Seat belt anchorage prescribed area strength or continuity significantly reduced up and above offside rear wheel (7.1.1 (a) (i))1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength very front chassi (5.3.6 (a) (i))1
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits See Printout (8.2.1.2 (a))1
Nearside Rear Outer Seat belt anchorage prescribed area is inadequately repaired sill |7.1.1 |a| |i||1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Corroded and detached from inner sill /floor area (7.1.1 (a) (i))1
Centre Front Indicator switch faulty |1.4.A.1|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill. |6.1.B.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill. |6.1.B.2|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill. |6.1.B.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill. |6.1.B.2|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Next to chassis leg. |6.1.B.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Next to chassis leg. |6.1.B.2|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 2 Holes in engine bay. |Chalked| |6.1.B.2|1
Front Anti-roll bar linkage fractured |2.4.G.1|1
Nearside Rear Anti-roll bar missing |2.4.G.1|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS |5.3.6 |a| |i||1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill pannels (6.1.1 (c) (i))1
Nearside Front Anti-roll bar has excessive play in a ball joint BROKEN |2.4.G.2|1
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing/chassis as marked |2.4.A.3|1
Offside Front Inner Suspension component mounting prescribed area is excessively corroded inner wing /chassis as marked |2.4.A.3|1
Nearside Rear Coil spring fractured or broken also corroded, |5.3.1 |b| |i||1
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing, |6.2.2 |d| |i||1
Valve stem seriously damaged |4.1.D.1e|1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch |5.3.6 |a| |i||1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch |5.3.6 |a| |i||1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill panel |7.1.1 |a| |i||1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill panel |7.1.1 |a| |i||1
Headlamp levelling device inoperative both (4.1.5 (a))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at front of subframe area (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at front of subframe area (6.1.1 (c) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (antiroll bar mountain) (5.3.6 (a) (i))1
Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen pipe not connected (3.5 (a))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing holed (5.3.6 (a) (i))1
Engine MIL inoperative or indicates a malfunction wires to oxygen sensor rubbing on propshaft (8.2.1.2 (h))1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering By wheel |6.1.1 |c| |ii||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch area (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch area (5.3.6 (a) (i))1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering IN WHEEL ARCH |6.1.A.1|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded SILL |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded SILL |2.4.A.3|1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced arch |7.1.1 |a| |i||1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch To Sill |5.3.6 |a| |i||1
Exhaust emissions likely to be affected by an exhaust leak between middle and back (8.2.1.1 (b))1
Offside Front Obligatory indirect vision device insecure sun visor (3.3 (b) (ii))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sills (7.1.1 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sills (5.3.6 (a) (i))1
Offside Front brake disc cracked |3.5.1h|1
Nearside Rear Bumper damaged and likely to cause injury when grazed or contacted bumper (6.1.4 (a) (i))1
Offside Front Anti-roll bar linkage missing (5.3.3 (a) (ii))1
Nearside Front Upper Suspension component mounting prescribed area is inadequately repaired *Anti roll bar mounting* (5.3.6 (a) (i))1
Offside Floor excessively deteriorated offside floor to sill holed (6.2.4 (a) (i))1
Nearside Front Direction indicator incorrect colour |4.4.3 |a||1
Offside Front Anti-roll bar linkage synthetic mounting deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Front Steering system has a road wheel fouling a part of the vehicle |2.2.D.2a|1
Nearside Front Lower Suspension arm pin or bush excessively worn bottom arm, front bush (5.3.4 (a) (i))1
Emissions not tested Catalyst disintegrated |7.3.A.1|1
Front Service brake excessively binding both sides |1.2.1 |f||1
Seat belt anchorage prescribed area is excessively corroded offside centre inner sill |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded centre inner sill |5.2.6|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced FLOOR SECTION (7.1.1 (a) (i))1
Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Nearside Rear Road wheel more than one fixing loose (5.2.1 (a) (ii))1
Nearside Rear Anti-roll bar ball joint dust cover missing (5.3.4 (b) (ii))1
Nearside Outer Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength within 30cms of antiroll bar mounting (5.3.6 (a) (i))1
Nearside Front Anti-roll bar linkage ball joint excessively worn bolt loose (5.3.4 (a) (i))1
Offside Front Anti-roll bar linkage ball joint excessively worn bolt loose (5.3.4 (a) (i))1
Exhaust has a major leak of exhaust gases CAT JOINT |7.1.2|1
Nearside Front Suspension component mounting prescribed area is excessively corroded INNER WING X CHASSIE RAIL NEAR ROLL BAR |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded INNER WING NEAR CHASSIE RAIL X ROLL BAR |2.4.A.3|1
Nearside Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1|1
Offside Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1|1
Rear Exhaust system insecure rubber broken (6.1.2 (a))1
Nearside Rear Lower Suspension arm pin or bush excessively worn front bush (5.3.4 (a) (i))1
Offside Rear Inner Suspension arm insecurely attached front (5.3.3 (a) (i))1
Nearside Rear Inner Suspension arm insecurely attached front (5.3.3 (a) (i))1
Offside Rear Inner Integral body structure has excessive corrosion which adversely affects braking or steering sill (6.1.1 (c) (ii))1
Offside Rear Outer Integral body structure has excessive corrosion which adversely affects braking or steering sill (6.1.1 (c) (ii))1
Nearside Rear Inner Integral body structure has excessive corrosion which adversely affects braking or steering sill (6.1.1 (c) (ii))1
Offside Front Suspension component mounting prescribed area is inadequately repaired chassis leg - anti-roll bar mounting |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg - anti-roll bar mounting |2.4.A.3|1
Front Anti-roll bar missing |2.4.G.1|1
Nearside Obligatory mirror not clearly visible from the drivers seat or incapable of being adjusted to be clearly visible from the driver`s seat |8.1.1d|1
Main beam tell-tale not working |4.9.1 |a| |ii||1
Offside Rear Seat belt installation upper anchorage of a three point belt|s| less than 110mm from the centre line of the seat |10.1 |t||1
Nearside Rear Seat belt installation upper anchorage of a three point belt|s| less than 110mm from the centre line of the seat |10.1 |t||1
Windscreen in an unacceptable condition |3.2 |c| |i||1
Position lamp not working offside front |4.2.1 |a||1
Main beam tell-tale missing |4.9.1 |a| |ii||1
Seat belt anchorage prescribed area strength or continuity significantly reduced nearside rear outer sill |7.1.1 |a| |i||1
Seat belt anchorage prescribed area strength or continuity significantly reduced offside rear outer sill |7.1.1 |a| |i||1
Offside Front Parking brake inoperative on one side |1.4.1 |a||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced under floor sill |7.1.1 |a| |i||1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i||1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seat belt anker |6.1.B.2|1
Nearside Front Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a|1
Offside Rear All position lamps excessively deteriorated so that they are not visible from a reasonable distance |1.1.A.3d|1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Inner sill |5.3.6 |a| |i||1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Outer sill |5.3.6 |a| |i||1
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corroded within 30cm of seat base anchorage point |6.2.2 |d| |i||1
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corroded within 30cm of seat base anchorage point |6.2.2 |d| |i||1
Hydraulic fluid leaking excessively Power steering fluid |8.4.1 |a| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg holed visible through wheel arch (6.1.1 (c) (i))1
Rear fog lamp tell tale missing |1.3.1b|1
Rear Exhaust has a major leak of exhaust gases from rear exhaust flange (6.1.2 (a))1
Rear Seat belt anchorage prescribed area strength or continuity significantly reduced both rear inner sills (7.1.1 (a) (i))1
Offside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt X 2 |2.4.G.2|1
Nearside Rear Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced Anti roll bar drop link Broken from suspension arm. |2.4.G.1|1
Nearside Front front brake binding Unable to test wheel bearing! |3.7.B.1|1
Nearside Rear Upper Suspension arm corroded and seriously weakened As marked |2.4.G.1|1
Nearside Rear Lower Suspension arm corroded and seriously weakened As marked |2.4.G.1|1
Offside Rear Upper Suspension arm corroded and seriously weakened As marked |2.4.G.1|1
Offside Rear Lower Suspension arm corroded and seriously weakened As marked |2.4.G.1|1
Front Anti-roll bar linkage has excessive play in a ball joint X 2 |2.4.G.2|1
Rear Anti-roll bar linkage has excessive play in a ball joint X 2 |2.4.G.2|1
Rear Suspension arm corroded and seriously weakened X 4 |2.4.G.1|1
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint snapped |2.4.G.2|1
Nearside Rear Suspension arm corroded and seriously weakened upper and lower |2.4.G.1|1
Offside Rear Suspension arm corroded and seriously weakened upper and lower |2.4.G.1|1
Nearside Front Seat belt affected by an insecure seat fixing |5.2.1b|1
Offside Front Headlamp aim beam image too far to the left |1.6.B4|1
Fuel cap/sealing device ineffective push fit cap/not a sealing cap (6.1.3 (b) (i))1
Fuel cap/sealing device missing cap missing |6.1.3 |b| |i||1
Parking brake lever has excessive movement indicating incorrect adjustment no reserve travel (1.1.6 (c))1
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill panel |6.1.1 |c| |i||1
Seat belt anchorage prescribed area is excessively corroded both outer sills |5.2.6|1
Offside Rear Outer Seat belt anchorage prescribed area is inadequately repaired sill. plate not welded on & repaired/covered with filler. (7.1.1 (a) (i))1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced corroded & holed floor to sill in a couple of areas. areas have been marked. (7.1.1 (a) (i))1
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i))1
Offside Rear Upper Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i))1
Offside Suspension component mounting prescribed area is excessively corroded outer sill at rear |2.4.A.3|1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i))1
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |marked in yellow| |6.1.1 |c| |i||1
Nearside Rear Suspension component mounting prescribed area is excessively corroded sills |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded sills |2.4.A.3|1
Offside Headlamp aim projected beam image is obviously incorrect No projected pattern on beam meter. (4.1.2 (c))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill is corroded. (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer and inner sill is corroded. (6.1.1 (c) (i))1
Offside Headlamp aim unable to be tested headlight not working (4.1.2 (b))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer floor/sill (5.3.6 (a) (i))1
Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid caliper (1.1.16 (b) (i))1
Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded wing area |2.4.A.3|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill(filled with silicone) (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill area (5.3.6 (a) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis member (6.1.1 (c) (i))1
Offside Front Headlamp aim projected beam image is obviously incorrect no image! (4.1.2 (c))1
Nearside Front Steering system has a road wheel fouling a part of the vehicle brake hose |2.2.D.2a|1
Offside Rear Outer Suspension arm attachment bracket/mounting nut missing |2.4.G.1|1
Nearside Rear Outer Suspension arm attachment bracket/mounting insecure bolt |2.4.G.1|1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill and inner sill |6.1.1 |c| |i||1
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3|1
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3|1
Nearside Front Suspension spring mounting prescribed area is excessively corroded chassis in inner arch |2.4.A.3|1
Offside Front Suspension spring mounting prescribed area is excessively corroded chassis in inner arch |2.4.A.3|1
Nearside Seat belt retracting mechanism defective |5.2.5b|1
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under body sill (6.2.2 (d) (i))1
Semaphore indicator switch faulty indicator/hazards staying on !! |1.4.C.1c|1
Nearside Rear position lamp|s| incorrect colour lens broken |1.1.A.3e|1
Fuel pipe union leaking at fuel filter (6.1.3 (b) (i))1
Offside Front Brake lining(s) missing (1.1.13 (c))1
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii))1
Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sills both sides (6.1.1 (c) (i))1
Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outriggers/jacking points both sides (6.1.1 (c) (i))1
Nearside Front Suspension component mounting prescribed area is inadequately repaired chassis rail (5.3.6 (a) (i))1
Nearside Outer Suspension component mounting prescribed area is inadequately repaired sill at rear (5.3.6 (a) (i))1
Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill at rear (5.3.6 (a) (i))1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))1
Nearside Rear brake disc contaminated by brake fluid |3.5.1h|1
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))1
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))1
Offside Front Anti-roll bar insecure and impairing directional stability (5.3.3 (a) (ii))1
Central Rear Exhaust has a major leak of exhaust gases section joint rusted away (6.1.2 (a))1
Emissions not tested leak of gases (8.2.1.2 (d))1
Exhaust has a major leak of exhaust gases center to rear flange (6.1.2 (a))1
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering by anti roll bar fix (6.1.1 (c) (ii))1
Nearside Rear Coil spring fractured or broken main spring (5.3.1 (b) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower control arm (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower control arm (5.3.6 (a) (i))1
Nearside Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill to floor (7.1.1 (a) (i))1
Offside Rear Lower Suspension arm corroded and seriously weakened Has also been repaired in the past (5.3.3 (b) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting hole (6.2.2 (d) (i))1
Emissions not tested Due to exhaust (8.2.1.2 (d))1
Rear Electrical wiring insecure and in contact with sharp edges Boot Main Positive Battery Harness Cable. |4.11 |a| |ii||1
Nearside Front Steering locking device missing track rod end. |2.1.3 |d||1
Offside Front Lower Steering locking device missing ball joint. |2.1.3 |d||1
Exhaust catalytic converter obviously modified |8.2.1.1 |a||1
Nearside Front Brake hose excessively stretched |1.1.12 |b| |ii||1
Offside Front Brake hose excessively stretched |1.1.12 |b| |ii||1
Nearside Front Brake hose excessively damaged Kinked. |1.1.12 |b| |ii||1
Offside Front Brake hose excessively damaged Kinked. |1.1.12 |b| |ii||1
Nearside Rear Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt Drop link. |5.3.4 |b| |ii||1
Offside Rear Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt Drop link. |5.3.4 |b| |ii||1
Nearside Rear Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings and outer sill |6.1.B.2|1
Nearside Rear Road wheel cracked |4.2.A.1a|1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside front chassis inside and outside of chassis (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside front chassis inside and outside of chassis (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside rear inner sill (5.3.6 (a) (i))1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |6.1.1 |c| |i||1
Offside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill panel |6.1.1 |c| |ii||1
Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill panel |6.1.1 |c| |ii||1
Front All position lamps not working |1.1.A.3b|1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength seal (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner seal (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner & outer sill (7.1.1 (a) (i))1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis at anti rollbar mount |6.1.B.2|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis at anti rollbar mount |6.1.B.2|1
Body has a sharp edge caused by damage offside mirror |6.1.C.1|1
Exhaust has a major leak of exhaust gases rear section |7.1.2|1
Offside Outer Seat belt anchorage prescribed area is inadequately repaired door sill panel at rear |5.2.6|1
Offside Outer Subframe mounting prescribed area is inadequately repaired door sill panel at rear |2.4.A.3|1
Exhaust emissions likely to be affected by an exhaust leak centre and rear box |8.2.2.1 |b||1
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering silll |6.1.1 |c| |ii||1
Central Rear Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii||1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Wing (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Wing (6.1.1 (c) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Anti Roll Bar Chassis Mounting Rusted Through (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Anti Roll Bar Chassis Mounting Rusted Through (5.3.6 (a) (i))1
Offside Rear Sub-frame attachment bracket/mounting missing (5.3.3 (a) (ii))1
Nearside Rear Suspension arm damaged and seriously weakened Possible bent hub, Anti roll bar link rubbing on coil spring (5.3.3 (b) (i))1
Offside Rear Brake pipe at imminent risk of failure or fracture brake pipe burst (1.1.11 (a))1
Nearside Outer Integral body structure has excessive corrosion which adversely affects braking or steering sill (6.1.1 (c) (ii))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing (6.1.1 (c) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis x2 |5.3.6 |a| |i||1
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill, so much filler cant discern metal. (6.2.2 (d) (i))1
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rail above anti roll bar & ahead of radiator. (6.2.2 (d) (i))1
Nearside Front Anti-roll bar mounting has an unsafe modification inner face remade with insufficient material. (5.3.3 (c) (i))1
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced hole in rear inner sill (6.1.1 (c) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill - behind wing (6.1.1 (c) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced underbody to sill area (6.1.1 (c) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis + cannot fully see! (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis + cannot fully see! (5.3.6 (a) (i))1
Offside Rear Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1|1
Offside Rear Upper Anti-roll bar linkage insecurely attached nut loose |5.3.3 |a| |i||1
Nearside Front Suspension component mounting prescribed area is inadequately repaired chassis spot welded |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area is inadequately repaired chassis spot welded |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area is inadequately repaired chassis leg |spot welded| |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area is inadequately repaired chassis leg |spot welded| |5.3.6 |a| |i||1
Offside Rear Outer Suspension arm pin or bush excessively worn (5.3.4 (a) (i))1
Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength SILL (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength SILL (5.3.6 (a) (i))1
Nearside Front Brake hose twisted incorrectly fitted |3.6.B.4c|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing,corroded holed |6.1.B.2|1
Offside Rear Brake performance not tested (1.2.1 (g))1
Nearside Front Body component damaged and likely to cause injury WING (6.2.1 (a) (i))1
Offside Front Body component damaged and likely to cause injury WING (6.2.1 (a) (i))1
Front Body component damaged and likely to cause injury BUMPER (6.2.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area is excessively corroded antiroll bar and track control arm mounting area |2.4.A.3|1
Nearside Front Upper Anti-roll bar linkage ball joint likely to become detached is detached |5.3.4 |a| |ii||1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Nearside and offside front chassis |6.1.B.2|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength MAIN CHASSIS (5.3.6 (a) (i))1
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded Outer bodysill |5.2.6|1
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded Outer bodysill |5.2.6|1
Nearside Front Position lamp showing red light to the front (4.2.3 (a) (ii))1
Nearside Body component damaged and likely to cause injury door mirror (6.2.1 (a) (i))1
Nearside Seat belt likely to become detached in the event of a collision |7.1.1 |a| |ii||1
Nearside Front Coil spring insecure not seated at top mount correctly (5.3.1 (a) (i))1
Offside Rear Lower Anti-roll bar linkage ball joint dust cover missing (5.3.4 (b) (ii))1
Offside Rear Lower Coil spring insecure incorrectly seated with lower shock cup (5.3.1 (a) (i))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis/inner arch (6.2.2 (d) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis/inner arch (6.2.2 (d) (i))1
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch way (6.2.2 (d) (i))1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch way (6.2.2 (d) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill excessively corroded (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis rail (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis rail (5.3.6 (a) (i))1
Front Position lamp not working both side |4.2.1 |a||1
Nearside Rear Anti-roll bar fractured |5.3.3 |b| |ii||1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front chassis legs inside wheel arch (5.3.6 (a) (i))1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassi leg |6.1.B.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassi leg |6.1.B.2|1
Suspension component mounting prescribed area is excessively corroded nearside front floor |2.4.A.3|1
Nearside All direction indicators not working (4.4.1 (a) (ii))1
Road wheel more than one fixing missing x4 (5.2.1 (a) (ii))1
Nearside Rear Brake prescribed area is excessively corroded Inner and Outer sill (1.1.21 (e) (i))1
Offside Rear Brake prescribed area is excessively corroded Inner and Outer sill (1.1.21 (e) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Above Anti roll bar mounting (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Above anti roll bar mounting (5.3.6 (a) (i))1
Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting osf nsr (6.2.2 (d) (i))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill. (6.2.2 (d) (i))1
Offside Front Anti-roll bar ball joint excessively worn ball joint has become unattached (5.3.4 (a) (i))1
Exhaust has a major leak of exhaust gases middle to back |7.1.2|1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside rear inner wheel arch |5.3.6 |a| |i||1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside rear sill to floor |5.3.6 |a| |i||1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside front inner wheelarch/chassis leg |5.3.6 |a| |i||1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside front inner wheelarch/chassis leg |5.3.6 |a| |i||1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill yellow chalked |7.1.1 |a| |i||1
Offside Front Anti-roll bar linkage insecurely attached link broken |5.3.3 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and Outer sills yellow chalked (5.3.6 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced rear inner sill holed (7.1.1 (a) (i))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i||1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i||1
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength battery tray (5.3.6 (a) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill hole (6.2.2 (d) (i))1
Nearside Front Brake disc contaminated Rust corrosion (1.1.14 (b))1
Offside Front Brake disc contaminated Rust corrosion (1.1.14 (b))1
Nearside Rear Brake disc contaminated Rust corrosion (1.1.14 (b))1
Offside Rear Brake disc contaminated Rust corrosion (1.1.14 (b))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced lower inner arch to sill (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced lower inner arch to sill (6.1.1 (c) (i))1
Front Headlamp light source and lamp not compatible both sides dipped and main has been converted to led (4.1.4 (c))1
Nearside Front Anti-roll bar attachment bracket/mounting nut missing |2.4.G.1|1
Nearside Front Seat belt webbing significantly weakened |7.1.2 |b| |ii||1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chalked (6.1.1 (c) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (chalked) (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (chalked) (5.3.6 (a) (i))1
Offside Front Brake modification unsafe flexi hose fouling wheel and suspesion arm on full lock |1.1.21 |d| |i||1
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sills and floor (5.3.6 (a) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill. (7.1.1 (a) (i))1
Emissions unable to be completed rear exhaust leak. (8.2.1.2 (d))1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill in various places (5.3.6 (a) (i))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer in various places (5.3.6 (a) (i))1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill near suspension arm |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill near suspension arm |6.1.B.2|1
Nearside Rear Parking (secondary brake) on a single line braking system has no recorded effort at a wheel no effort on handbrake (1.3.1 (a) (ii))1
Nearside Front Seat belt not functioning as intended (7.1.2 (c))1
Central Exhaust has a major leak of exhaust gases sleeve joint (6.1.2 (a))1
Brake performance not tested rear wheel loose and worn (1.2.1 (g))1
Exhaust Lambda reading after 2nd fast idle outside specified limits due to exhaust leak (8.2.1.2 (c))1
Road wheel fixings not compatible the nut tapers are not compatible with this style of wheel (5.2.2 (d))1
Offside Rear Road wheel spigot mounting worn to the extent that wheel is likely to become detached (5.2.2 (c) (ii))1
Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength the inner wheel arch paneling which joins the load bearing structure together (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill area (5.3.6 (a) (ii))1
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill area (5.3.6 (a) (ii))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outersills (7.1.1 (a) (i))1
Offside Front Brake pipe at imminent risk of failure or fracture (1.1.11 (a))1
Central Exhaust has a major leak of exhaust gases pipe front joint (6.1.2 (a))1
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box sections,both sides close to anti rollbar mounts (5.3.6 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outersill (7.1.1 (a) (i))1
Offside Front position lamp|s| obviously incorrectly positioned |1.1.A.3a|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed & excessively corroded. Also been previously repaired (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear outer sill excessively corroded & holed (7.1.1 (a) (i))1
Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced marked (6.1.1 (a) (i))1
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill panel |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded sill panel |2.4.A.3|1
Rear Position lamp not working Both sides (4.2.1 (a) (ii))1
Offside Rear Sub-frame attachment bracket/mounting insecure and impairing directional stability bolt snapped off (5.3.3 (a) (ii))1
Nearside Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))1
Offside Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))1
Offside Rear Suspension arm corroded and seriously weakened suspension arm cracked (5.3.3 (b) (i))1
Offside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting within 30cm of jacking point (6.2.2 (d) (i))1
Nearside Rear Upper Anti-roll bar has excessive play in a pin/bush |2.4.G.2|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner rear sill |5.2.6|1
Offside Rear Anti-roll bar insecure |2.4.G.1|1
Offside Track rod end ball joint worn to the extent there is a serious risk of detachment |2.1.3 |b| |ii||1
Central Rear Exhaust has a major leak of exhaust gases joint |7.1.2|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill panel (marked in yellow) (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at anti roll bar mount (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at anti roll bar mount (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded inner sill/floor |2.4.A.3|1
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i||1
Exhaust has a major leak of exhaust gases rear middle to rear joint blowing |6.1.2 |a||1
Exhaust Lambda reading after 2nd fast idle outside specified limits 1.125 (8.2.1.2 (c))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section under sill as marked (5.3.6 (a) (i))1
Front Vehicle structure has excessive corrosion which adversely affects braking or steering O/S and N/S front chassis and floor pans . |6.1.A.1|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower inner wing and chassis rail antiroll bar mounting area (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower inner wing and chassis rail antiroll bar mounting area (5.3.6 (a) (i))1
Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Bulkhead too sill (5.3.6 (a) (i))1
Offside Front Anti-roll bar inappropriately repaired |2.4.A.2|1
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength OSR sill / bottom of the wheel arch (5.3.6 (a) (i))1
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced NS mid sill 30cm to seat mounting (6.1.1 (c) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced NSR chassis by boot floor (6.1.1 (c) (i))1
Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Front Steering box leaking to the extent that oil is dripping under lower engine cover (2.1.1 (e) (ii))1
Front Power steering fluid reservoir empty due to leak (2.1.5 (b) (ii))1
Offside Front Stop lamp not working |1.2.1b|1
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|1
Nearside Passenger`s seat insecure |6.2.6 |a| |ii||1
Emissions not tested excessive exhaust leak |7.3.A.1|1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under arch on body |6.1.1 |c| |i||1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near jacking point on sill |6.1.1 |c| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under arch corroded on body |6.1.1 |c| |i||1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill near jacking point |6.1.1 |c| |i||1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill near jacking point |6.1.1 |c| |i||1
Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill and floor panel |front to rear| |7.1.1 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis member |5.3.6 |a| |i||1
Offside Front Track rod end seriously misaligned Track rod damaged/bent (2.1.3 (e))1
Offside Rear Anti-roll bar pin or bush excessively worn Anti-roll bar has moved and fouling on subrame/suspension (5.3.4 (a) (i))1
Offside Front Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction Phone cradle attached to screen (3.1 (a) (ii))1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill |7.1.1 |a| |i||1
Nearside Rear Inner Integral body structure is deformed and structural rigidity is significantly reduced sill |6.1.1 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Anti-roll bar mounting prescribed area (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner seal |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner seal |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner seal |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer seal |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer seal |5.3.6 |a| |i||1
Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings both n/s/f and o/s/f |6.1.B.2|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger/floor (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch chassis rail (5.3.6 (a) (i))1
Offside Rear reflector missing |1.5.1a|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed |6.1.B.2|1
Front Body insecure and dangerous to other road users FRONT BUMPER LOOSE |6.1.B.1b|1
Nearside Front Service brake excessively binding brakes out of balance (1.2.1 (f))1
Front An item not tested |Manual|1
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired not continuously welded |5.2.6|1
Nearside Front Suspension component mounting prescribed area is excessively corroded Anti roll bar mount area holed rusty |2.4.A.3|1
Offside Front Suspension spring mounting prescribed area is excessively corroded upper mount |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arches |2.4.A.3|1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wing (6.1.1 (c) (i))1
Nearside Seat belt anchorage prescribed area is excessively corroded rear sill |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded rear sill |5.2.6|1
Offside Rear Lower Suspension arm fractured |5.3.3 |b| |ii||1
Nearside Rear Seat belt anchorage prescribed area is fractured |5.2.6|1
Rear Exhaust has a major leak of exhaust gases silencer. (6.1.2 (a))1
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill. (6.1.1 (c) (i))1
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill. (6.1.1 (c) (i))1
Fuel cap/sealing device ineffective Temporary fuel cap fitted (6.1.3 (b) (i))1
Offside Front Electrical wiring insecure |1.9.2a|1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS LEG (6.1.1 (c) (i))1
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))1
Coil spring fractured or broken ns front and ns rear |5.3.1 |b| |i||1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis in wheel arch (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis in wheel arch (6.1.1 (c) (i))1
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced battery tray @ offside rear (6.1.1 (c) (i))1
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Holes in both inner and outer sills (6.2.2 (d) (i))1
Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Both O/S/R and N/S/R inner wing floor panels (6.2.2 (d) (i))1
Parking brake operation is causing the vehicle to swerve to the nearside |3.7.C.3a|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded undersill area corroded within 30cms mounting point |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded sill and undersill corroded within 30cms mounting point |5.2.6|1
Offside Front Suspension component mounting prescribed area is excessively corroded near the stabiliser attachment |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded near the stabiliser attachment |2.4.A.3|1
Offside Rear Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Offside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2|1
Offside Front Suspension component mounting prescribed area is excessively corroded CHASSIS AREA BY ANTI ROLL BAR MOUNTING |2.4.A.3|1
Engine MIL inoperative or indicates a malfunction clear fault |8.2.1.2 |h||1
Emissions not tested Hole in exhaust (8.2.1.2 (d))1
Offside Rear Outer Seat belt anchorage prescribed area is severely distorted sill |5.2.6|1
Exhaust emissions likely to be affected by an induction leak rear back box (8.2.1.1 (b))1
Nearside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))1
Nearside Front Headlamp aim not tested bulb inop (4.1.2 (b))1
Front Hydraulic fluid leaking excessively power steering fluid (8.4.1 (a) (i))1
Exhaust has a major leak of exhaust gases Rear box (6.1.2 (a))1
Emissions unable to be completed Mil light and major exhaust leak (8.2.1.2 (d))1
Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed and corroded (6.1.1 (c) (i))1
Nearside Rear Lower Suspension arm likely to become detached (5.3.3 (a) (ii))1
Nearside Front Lower Suspension arm corroded and seriously weakened s/ab mount flange (5.3.3 (b) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner/outer cill/arch areas (6.1.1 (c) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner/outer cill/arch areas (6.1.1 (c) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced innersill |7.1.1 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced innersill |7.1.1 |a| |i||1
Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill at the rear (6.1.1 (c) (i))1
Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill at the rear (6.1.1 (c) (i))1
Emissions not tested Exhaust blow (8.2.1.2 (d))1
Offside Front Suspension component mounting prescribed area is excessively corroded in front wheel arch |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded in rear arch |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded in rear wheel arch |5.2.6|1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill /lower arch |6.2.2 |d| |i||1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill/ lower arch |6.2.2 |d| |i||1
Rear Exhaust has a major leak of exhaust gases middle to rear |6.1.2 |a||1
Vehicle structure has excessive corrosion which adversely affects braking or steering Both front chassis legs (6.1.1 (c) (ii))1
Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor and rear of wheel arches (5.3.6 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner seal inner floor (7.1.1 (a) (i))1
Offside Rear Subframe mounting prescribed area is fractured x2 |2.4.A.3|1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor to sill (5.3.6 (a) (i))1
Nearside Track rod end deformed and unserviceable |2.2.C.1d|1
Nearside Steering rack deformed and unserviceable |2.2.C.1d|1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced boot floor (6.1.1 (c) (i))1
Battery insecure and likely to fall from carrier heavily corroded mount (4.13 (a) (ii))1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s and o/s/r outer sills |6.1.B.2|1
Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill holed |6.1.A.1|1
Nearside Side repeater light intensity significantly reduced |4.4.3 |a||1
Offside Side repeater light intensity significantly reduced |4.4.3 |a||1
Nearside Rear Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced |6.1.1 |b| |ii||1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Floor/inner sill,as marked (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Arch as marked (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch/chassis as marked (5.3.6 (a) (i))1
Offside Seat belt anchorage prescribed area is excessively corroded floor as marked |5.2.6|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail as marked (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail as marked (5.3.6 (a) (i))1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill holed |6.1.B.2|1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill holed |6.1.B.2|1
Offside Front Lower Body has a sharp edge caused by damage bumper valance cracked and taped up |6.1.C.1|1
Brake pipe leaking on a hydraulic braking system front to rear |1.1.11 |b| |ii||1
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sil (5.3.6 (a) (i))1
Offside Rear Body component corroded and likely to cause injury Wing (6.2.1 (a) (i))1
Offside Front Hydraulic brake calliper damaged |1.1.16 |a| |i||1
Nearside Front Anti-lock braking system wheel speed sensor missing bolt missing loose sensor (1.6 (c))1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area 30 cm of seat belt mount area (7.1.1 (a) (i))1
Offside Rear Anti-roll bar linkage has excessive play in a ball joint droplink |2.4.G.2|1
Offside Front Wheel insecure wheel nut cracked |4.2.A.1c|1
Offside Front Lower Suspension arm cracked cracked due to corrosion. |2.4.G.1|1
Nearside Rear Lower Suspension arm cracked cracked due to being corroded |2.4.G.1|1
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded inner door sill |2.4.A.3|1
Offside Front Lower Suspension component mounting prescribed area is excessively corroded outer door sill |2.4.A.3|1
Power steering component|s| leaking major fluid leak |2.3.3b|1
Nearside Rear Coil spring mounting cracked |2.4.C.3b|1
Nearside Front Upper Direction indicator incorrect colour n/s/f indicator showing white light. (4.4.3 (a))1
Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sills (7.1.1 (a) (i))1
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arches (5.3.6 (a) (i))1
Nearside Rear Road wheel fixings not compatible nut damaged (5.2.2 (d))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Under body chassiss (6.1.1 (c) (i))1
Nearside Front Lower Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii))1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner and outer sill (6.2.2 (d) (ii))1
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||1
Front Suspension component mounting prescribed area is excessively corroded BOTH chassis legs above anti roll bar mounting |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3|1
Front Subframe mounting prescribed area is excessively corroded BOTH chassis legs by subframe mounts |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill area (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/chassis leg area (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/chassis leg area (5.3.6 (a) (i))1
Nearside Front Brake hose excessively twisted fouling suspension arm (1.1.12 (b) (ii))1
Offside Front Brake hose excessively twisted fouling suspension arm (1.1.12 (b) (ii))1
Offside Front Suspension component mounting prescribed area is excessively corroded inner wing chassis section |2.4.A.3|1
Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger (5.3.6 (a) (i))1
Offside Front Floor excessively deteriorated FLOOR CORRODED |6.2.4 |a| |i||1
Offside Front Suspension component mounting prescribed area is excessively corroded HOLED |2.4.A.3|1
Nearside Front Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i))1
Offside Front Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i))1
Nearside Front Subframe mounting prescribed area is inadequately repaired (5.3.6 (a) (i))1
Offside Front Subframe mounting prescribed area is inadequately repaired (5.3.6 (a) (i))1
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Both outer sills |6.1.B.2|1
Exhaust emissions carbon monoxide content after 2nd fast idle excessive 10.64% |7.3.D.3|1
Exhaust emissions hydrocarbon content after 2nd fast idle excessive 485 |7.3.D.3|1
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits 0.68 |7.3.D.3|1
Nearside Front Outer Subframe mounting prescribed area is excessively corroded sill |2.4.A.3|1
Nearside Front Inner Subframe mounting prescribed area is excessively corroded floor and sill |2.4.A.3|1
Offside Front Inner Subframe mounting prescribed area is excessively corroded jacking point |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is inadequately repaired inner sill | surrounding areas corroded also| |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill split |5.3.6 |a| |i||1
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outter sill (6.2.2 (d) (i))1
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outter sill (6.2.2 (d) (i))1
Offside Front Brake hose connection leaking on a hydraulic braking system hose to caliper union. (1.1.12 (c) (ii))1
Offside Front Brake performance not tested caliper brake fluid leak (1.2.1 (g))1
Offside Suspension component mounting prescribed area is excessively corroded |front+rear|outer sill |2.4.A.3|1
Nearside Suspension component mounting prescribed area is excessively corroded |front+rear|outer sill |2.4.A.3|1
Headlamps matched pair are not the same colour (4.1.4 (d))1
Nearside Rear Stop lamp(s) light intensity significantly reduced (4.3.3 (a) (ii))1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced arch (7.1.1 (a) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced floor / sill (7.1.1 (a) (i))1
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded inner wheel arch (1.1.21 (e) (i))1
Central Exhaust has a major leak of exhaust gases joint (6.1.2 (a))1
Offside Side repeater missing (4.4.1 (a) (ii))1
Nearside Obligatory mirror insecure (3.3 (b) (ii))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill / floor (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill / floor (7.1.1 (a) (i))1
Offside Inner Seat belt anchorage prescribed area is inadequately repaired sill, spot welded at bottom (7.1.1 (a) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch area (7.1.1 (a) (i))1
Offside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii||1
Offside Front Lower Steering linkage ball joint worn to the extent there is a serious risk of detachment |2.1.3 |b| |ii||1
Offside Rear Coil spring fractured or broken Two Brown Spots (5.3.1 (b) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Sill (7.1.1 (a) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front chassis leg (6.1.1 (c) (i))1
Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))1
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to floor (6.1.1 (c) (i))1
Offside brake caliper leaking |3.6.A.1|1
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear of outer sill |6.1.B.2|1
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear of outer sill |6.1.B.2|1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner + outer sill (6.2.2 (d) (i))1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner + outer sill (6.2.2 (d) (i))1
Offside Front Upper Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))1
Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened Anti Roll bar bracket mounting (5.3.3 (b) (i))1
Offside Front Anti-roll bar attachment bracket/mounting insecure anti roll bar linkage bar top mounting ball joint missing cap rivet |2.4.G.1|1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Boot floor (6.1.1 (c) (i))1
Nearside Rear Lower Suspension arm corroded and seriously weakened corroded and holed (5.3.3 (b) (i))1
Offside Brake pipe at imminent risk of failure or fracture front to rear pipe corroded and leaking (1.1.11 (a))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded and holed (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded and holed (7.1.1 (a) (i))1
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill / floor corroded and holed (7.1.1 (a) (i))1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sills at rear |6.1.B.2|1
Exhaust has a major leak of exhaust gases middle |7.1.2|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced main chassis rail in wheel arch (6.1.1 (c) (i))1
Offside Rear Floor excessively deteriorated boot floor corroded away not attached at seam (6.2.4 (a) (i))1
Emissions not tested not tested due to exhaust corroded and insecure (8.2.1.2 (d))1
Rear Exhaust has a major leak of exhaust gases exhaust corroded (6.1.2 (a))1
Offside Front Anti-roll bar linkage ball joint excessively worn broken (5.3.4 (a) (i))1
Undertray likely to become detached corroded and insecure |6.2.1 |a| |ii||1
Nearside Seat belt anchorage prescribed area is excessively corroded Floor |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded Floor |5.2.6|1
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced whole chassis and suspension components corroded |6.1.1 |c| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing chassis leg (5.3.6 (a) (i))1
Nearside Front Lower Steering locking device missing ball joint (2.1.3 (d))1
Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded door sill |5.2.6|1
Nearside Rear Seat belt likely to become detached in the event of a collision inner and outer sil (7.1.1 (a) (ii))1
Offside Rear Seat belt likely to become detached in the event of a collision inner and outer sil (7.1.1 (a) (ii))1
Front Track rod end ball joint has excessive play (2.1.3 (b) (i))1
Seat belt anchorage prescribed area is excessively corroded Inner sill |5.2.6|1
Offside Lower Seat belt anchorage prescribed area is excessively corroded Inner sill |5.2.6|1
Offside Lower Seat belt anchorage prescribed area is excessively corroded Floor pan |5.2.6|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded boot area |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded boot area |2.4.A.3|1
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded chassis by upper suspension arm |2.4.A.3|1
Offside Front Upper Suspension component mounting prescribed area is excessively corroded chassis by upper suspension arm |2.4.A.3|1
Nearside Lower Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6|1
Offside Lower Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6|1
Offside Lower Seat belt anchorage prescribed area is excessively corroded floor pan |5.2.6|1
Exhaust has a major leak of exhaust gases |backbox join| |6.1.2 |a||1
Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/ floor heavily corroded |5.3.6 |a| |i||1
Offside Rear Anti-roll bar attachment bracket/mounting insecure and impairing directional stability |5.3.3 |a| |ii||1
Exhaust has a major leak of exhaust gases backbox join |6.1.2 |a||1
Nearside Track rod end loose |2.2.B.1d|1
Offside Track rod end loose |2.2.B.1d|1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis by (d)bush (6.1.1 (c) (i))1
Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced lower wing to sill both sides (6.1.1 (c) (i))1
Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides outer and inner sills (6.1.1 (c) (i))1
Offside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i))1
Offside Rear Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i))1
Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides chassis rails (6.1.1 (c) (i))1
Parking brake efficiency below requirements both sides (1.4.2 (a) (i))1
Nearside Front suspension has a suspension lower ball joint securing nut not locked missing |2.5.B.1a|1
Rear Exhaust has a major leak of exhaust gases tailpipe joint (6.1.2 (a))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outersill (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength underwing (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill rotten and holed (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill rotten and holed (7.1.1 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nearside Rear Inner Sill (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside Rear Inner Sill x2 (5.3.6 (a) (i))1
Direction indicator incorrect colour Both Rear (4.4.3 (a))1
Position lamp not working both sides front (4.2.1 (a) (ii))1
Offside Front Seat belt buckle not functioning as intended not releasing under tension (7.1.2 (d))1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL |5.3.6 |a| |i||1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL |5.3.6 |a| |i||1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (marked in yellow) (5.3.6 (a) (i))1
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (marked in yellow) (7.1.1 (a) (i))1
Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (marked in yellow) (7.1.1 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor holed (marked in yellow) (5.3.6 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area rusted and holed as marked |7.1.1 |a| |i||1
Nearside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corroded (6.2.2 (d) (i))1
Brake performance unable to be tested due to caliper leaking (1.2.1 (g))1
Stop lamp not working both |1.2.1b|1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i||1
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and wing (5.3.6 (a) (i))1
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area |5.3.6 |a| |i||1
Offside Rear Lower Suspension component mounting prescribed area is inadequately repaired outer sill patch repair spot welded at bottom |5.3.6 |a| |i||1
Nearside Rear Inner Brake disc significantly and obviously worn faces |1.1.14 |a| |i||1
Offside Rear Inner Brake disc significantly and obviously worn face |1.1.14 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre floorpan (7.1.1 (a) (i))1
Coil spring fractured or broken All 4 (5.3.1 (b) (i))1
Offside Front Brake fluid warning lamp illuminated fliud low topped up |3.6.G.2|1
Centre Front Exhaust system not adequately supported |7.1.1|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill at rear rusted and holed within 30cm of seatbelt mount (7.1.1 (a) (i))1
Nearside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced chassis |2.4.G.1|1
Offside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced chassis |2.4.G.1|1
Nearside Front Subframe mounting prescribed area is inadequately repaired |2.4.A.3|1
Offside Front Subframe mounting prescribed area is inadequately repaired |2.4.A.3|1
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded outer sill where chalked |2.4.A.3|1
Offside Front Lower Subframe mounting prescribed area is excessively corroded osf lower boxed chassis in two places where chalked |2.4.A.3|1
Offside Front Lower Subframe mounting prescribed area is excessively corroded floor pan area where chalked |2.4.A.3|1
Nearside Front Lower Subframe mounting prescribed area is excessively corroded floor pan area where chalked |2.4.A.3|1
Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded under bonnet near strut top mounting where chalked |2.4.A.3|1
Offside Front Anti-roll bar locating pin insecure |2.4.G.3a|1
Rear Exhaust has a major leak of exhaust gases bolt missing from flange (6.1.2 (a))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg rusted and holed (5.3.6 (a) (i))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill rusted and holed (5.3.6 (a) (i))1
Lower Power steering pipe|s| or hose|s| leaking pas pipe at rack |2.3.3b|1
Upper Power steering pipe|s| or hose|s| excessively corroded pas pipe at rack |2.3.2|1
Offside Front Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1|1
Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seat belt mounting point |6.1.B.2|1
Offside Seat belt anchorage prescribed area is excessively corroded outer cill |5.2.6|1
Rear Exhaust emissions likely to be affected by an induction leak (8.2.1.1 (b))1
Offside Front Position lamp not working side light |4.2.1 |a||1
Nearside Front Lower Shock absorber insecure nut missing |2.7.2b|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper wishbone |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper wishbone area |5.3.6 |a| |i||1
Parking brake lever releases when knocked intermittently |3.1.6a|1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting &outer sill areas (6.2.2 (d) (i))1
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting &outer sill areas (6.2.2 (d) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail/anti roll bar munting. (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner wheel arch corroded. (7.1.1 (a) (i))1
Brake performance not tested Brake pipe leaking, (1.2.1 (g))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill/ floor in two places. (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/chassis rail (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor/chassis rail (5.3.6 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor pan. (7.1.1 (a) (i))1
Offside Rear Upper Seat belt anchorage prescribed area strength or continuity significantly reduced Inner wheel arch |7.1.1 |a| |i||1
Integral body structure inadequately repaired such that structural rigidity is significantly reduced Nearside rear outer sill (6.1.1 (d) (i))1
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Offside rear inner and outer sills (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Chassis rail at anti roll bar mount (5.3.6 (a) (ii))1
Offside Seat belt anchorage prescribed area is excessively corroded inner & outer |5.2.6|1
Central Brake pipe connection leaking on a hydraulic braking system (1.1.11 (b) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS LEG (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASIS LEG (5.3.6 (a) (i))1
Offside Front Lower Suspension arm ball joint likely to become detached |5.3.4 |a| |ii||1
Power steering inoperative and steering adversely affected roughness in steering (2.1.5 (c) (ii))1
Nearside Rear Road wheel more than one fixing missing 2 nuts missing (5.2.1 (a) (ii))1
Offside Rear Road wheel more than one fixing missing 2 nuts missing (5.2.1 (a) (ii))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Jack point (6.2.2 (d) (i))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Jack point (6.2.2 (d) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outrigger (6.2.2 (d) (i))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Drop will to inner wheelarch (6.2.2 (d) (i))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and nearside front chassis by antiroll bar mounting |5.3.6 |a| |i||1
Exhaust emissions likely to be affected by an exhaust leak exhaust corroded and leaking excessively |8.2.1.1 |b||1
Power steering inoperative and steering adversely affected steering heavy |2.1.5 |c| |ii||1
Power steering pipe/hose corroded such that the steering is adversely affected corroded/leaking |2.1.5 |g| |ii||1
Offside Front Anti-roll bar linkage insecurely attached |broken| |5.3.3 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength forward chassis section holed (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength forward chassis section holed (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill front and back |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jack point |5.3.6 |a| |i||1
Nearside Front Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2|1
Front Front position lamp|s| not working both |1.1.A.3b|1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced lower inner sill and rear lower inner wheel arch area (6.1.1 (c) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor section (5.3.6 (a) (i))1
Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill and floor corroded and chalked (6.1.1 (c) (i))1
Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill corroded and chalked (6.1.1 (c) (i))1
Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced both lower parts of outer sills corroded (6.1.1 (c) (i))1
Offside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced quarter panel corroded and chalked (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch area (5.3.6 (a) (i))1
Nearside Front Body panel insecure Wheel arch (6.2.1 (a) (i))1
Offside Front Body panel insecure Wheel arch (6.2.1 (a) (i))1
Offside Front Body panel insecure Wing (6.2.1 (a) (i))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg (6.1.1 (c) (i))1
Nearside Front Inner Subframe mounting prescribed area is excessively corroded chassis leg |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by roll bar mount bracket (5.3.6 (a) (i))1
Offside Seat belt anchorage likely to become detached in the event of a collision outer sill |7.1.1 |a| |ii||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by anti roll bar mounting |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chaises by anti roll bar |5.3.6 |a| |i||1
Offside Brake pipe leaking on a hydraulic braking system Front to rear under body clip (1.1.11 (b) (ii))1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced middle of car inner sill (6.1.1 (c) (i))1
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill marked (6.1.1 (c) (i))1
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill marked (6.1.1 (c) (i))1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill marked (6.1.1 (c) (i))1
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill marked (6.1.1 (c) (i))1
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill as marked (5.3.6 (a) (i))1
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill as marked (5.3.6 (a) (i))1
Rear Exhaust has a major leak of exhaust gases silencer box (6.1.2 (a))1
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))1
Front Sub-frame corroded and seriously weakened bolt on suport |2.4.G.1|1
Nearside Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3|1
Offside Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3|1
Nearside Suspension component mounting prescribed area is excessively corroded floor to sill |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassie leg |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassie leg |2.4.A.3|1
Centre Rear Electrical wiring insecure |1.9.2a|1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings corroded next to rear sub frame mount |6.1.B.2|1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced back of sill (6.1.1 (c) (i))1
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced boot floor (6.1.1 (c) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced back of sill (6.1.1 (c) (i))1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting N/S/F frame rail excessively corroded within 30cm of suspension mounting. (6.2.2 (d) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor chassis (5.3.6 (a) (i))1
Nearside Rear Exhaust emissions likely to be affected by an exhaust leak rear box joint (8.2.1.1 (b))1
Offside Front Anti-roll bar linkage which is adjustable, locking device insecure |2.4.G.1|1
Nearside Front Direction indicator adversely affected by the operation of another lamp indicator adversely affected by front position lamp [sidelight] (4.4.3 (b))1
Offside Rear Upper Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor to inner sill |7.1.1 |a| |i||1
Offside Front Suspension component corroded and seriously weakened chassis |5.3.3 |b| |i||1
Offside Front Suspension component corroded and seriously weakened flore |5.3.3 |b| |i||1
Offside Rear Suspension component corroded and seriously weakened flore |5.3.3 |b| |i||1
Nearside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under arch (6.1.1 (c) (i))1
Nearside Rear Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength outer sill |5.2.6|1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under arch under arch (6.1.1 (c) (i))1
Nearside Rear Suspension arm corroded and seriously weakened trailing arms (5.3.3 (b) (i))1
Offside Rear Suspension arm corroded and seriously weakened trailing arms (5.3.3 (b) (i))1
brake caliper leaking o/side rear |3.6.A.1|1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill |5.3.6 |a| |i||1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill |5.3.6 |a| |i||1
Offside Rear Seat belt anchorage prescribed area is excessively corroded Rear of sill inner, marked yellow. |5.2.6|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill and floor (7.1.1 (a) (i))1
Offside Brake pipe at imminent risk of failure or fracture front to rear corroded and leaking (1.1.11 (a))1
Nearside Steering locking device missing track rod end split pin missing (2.1.3 (d))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill corroded near seat belt lower mounting |7.1.1 |a| |i||1
Electrical wiring likely to touch hot or rotating parts rear oxygen sensor wiring touching exhaust |4.11 |a| |iii||1
Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mounting point. |2.4.A.3|1
Exhaust has a major leak of exhaust gases Backbox to intermediate pipe flange joint corroded away. (6.1.2 (a))1
Nearside Rear Upper Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))1
Offside Rear Upper Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))1
Offside Rear Inner Integral body structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii))1
Offside Rear Outer Integral body structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii))1
Nearside Rear Brake pipe leaking on a hydraulic braking system going across rear axle |1.1.11 |b| |ii||1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering under front wing |6.1.1 |c| |ii||1
Brake performance not tested bust brake pipe |1.2.1 |g||1
Offside Rear Anti-roll bar pin or bush likely to become detached nut loose |5.3.4 |a| |ii||1
Nearside Front Steering locking device missing wishbone split pin missing |2.1.3 |d||1
Offside Front Steering locking device missing wishbone split pin missing |2.1.3 |d||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe |5.3.6 |a| |i||1
Emissions not tested due to major exhaust leak (8.2.1.2 (d))1
Offside Front Upper Anti-roll bar linkage attachment bracket/mounting fractured (5.3.3 (b) (ii))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner/sill (6.1.1 (c) (i))1
Front Service brake excessively binding o/s and n/s (1.2.1 (f))1
Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired outer sill (6.2.2 (d) (ii))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch (6.1.1 (c) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL |7.1.1 |a| |i||1
Rear Exhaust carbon monoxide content after 2nd fast idle exceeds default limits |8.2.1.2 |b||1
Rear Exhaust hydrocarbon content after 2nd fast idle exceeds default limits |8.2.1.2 |b||1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing /chassis (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced holed (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced holed (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/floor (5.3.6 (a) (i))1
Front coil spring broken both sides |2.4.C.1a|1
Central Front Power steering pipe|s| or hose|s| leaking in front of steering rack |2.3.3b|1
Nearside Outer Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings boot floor |6.1.B.2|1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to sill holed x2 |6.1.B.2|1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to sill x1 |6.1.B.2|1
Nearside Front Anti-roll bar linkage has excessive play in a ball joint droplink` |2.4.G.2|1
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Front Tie bar/rod insecure link rod |2.4.G.1|1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering floor |6.1.A.1|1
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Offside Front Steering component mounting prescribed area is excessively corroded (2.1.2 (e) (i))1
Offside Rear Lower Floor excessively deteriorated offside rear under battery severly corroded (6.2.4 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL (5.3.6 (a) (i))1
Nearside Rear Inner Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i||1
Offside Rear Inner Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i||1
Passenger`s airbag obviously defective |5.4.1|1
Offside Headlamp aim beam image obviously incorrect bulb in wrong |1.8.A.1b|1
Rear Exhaust has a major leak of exhaust gases at joint |7.1.2|1
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded outer sill panel |5.2.6|1
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded inner sill panel |5.2.6|1
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded inner sill panel |5.2.6|1
Nearside Front Suspension component mounting prescribed area is excessively corroded under wing chassis leg |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded under wing chassis leg |2.4.A.3|1
Nearside Front Steering linkage ball joint has excessive play (2.1.3 (b) (i))1
Front Brake disc significantly and obviously worn o/s and n/s (1.1.14 (a) (i))1
Brake hydraulic reservoir cap missing (1.1.10 (e))1
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced holed (6.1.1 (c) (i))1
Fuel system component leaking excessively or a risk of fire manifold/injectors area |6.1.3 |b| |ii||1
Brake performance not tested due to fuel leak |1.2.1 |g||1
Emissions not tested due to fuel leak |8.2.1.2 |d||1
Offside Front Brake hose stretched |3.6.B.4c|1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill end (6.1.1 (c) (i))1
Nearside Rear Inner Brake disc significantly and obviously worn (1.1.14 (a) (i))1
Offside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear sill to floor (7.1.1 (a) (i))1
Nearside Rear Braking system leaking rear brake caliper |3.6.A.1|1
Offside Front Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))1
Nearside Rear Braking system leaking cailper |3.6.A.1|1
Offside Front Drivers seat with a defective structure fixing bolts insecure (6.2.5 (a) (i))1
Offside Front Lower Suspension component insecure and impairing directional stability ball joint (5.3.3 (a) (ii))1
Front Bumper damaged and likely to cause injury when grazed or contacted racing timing bar (6.1.4 (a) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg visible from wheel arch (6.1.1 (c) (i))1
Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg visible from the underside (6.1.1 (c) (i))1
Nearside Front Wheel bolt|s| loose |4.2.A.1e|1
Offside Front Brake hose connection leaking on a hydraulic braking system Hose to caliper (1.1.12 (c) (ii))1
Front Shock absorber has a serious fluid leak |2.7.3|1
Rear Shock absorber has a serious fluid leak |2.7.3|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill as marked |7.1.1 |a| |i||1
Offside Front Headlamp not in good working order |not working| |1.2.4a|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced door sill |7.1.1 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill |7.1.1 |a| |i||1
Nearside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii||1
Offside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii||1
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected under sill |5.3.6 |a| |ii||1
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected under sill |5.3.6 |a| |ii||1
Nearside Rear Anti-roll bar attachment bracket/mounting insecure and impairing directional stability (5.3.3 (a) (ii))1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings boot floor |6.1.B.2|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded jnner and outer sil |5.2.6|1
Offside Rear Lower Suspension arm corroded and seriously weakened Arm corroded & holed (5.3.3 (b) (i))1
Front All position lamps not working |4.2.1 |a||1
Nearside Front Vehicle structure is so deformed it is likely to adversely affect braking or steering front chassis leg deformed (6.1.1 (a) (ii))1
Offside Front Vehicle structure is so deformed it is likely to adversely affect braking or steering front chassis leg deformed (6.1.1 (a) (ii))1
Engine MIL inoperative or indicates a malfunction Light on dash (8.2.1.2 (h))1
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill corroded (6.1.1 (c) (i))1
Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both sills (6.2.2 (d) (i))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail (6.2.2 (d) (i))1
Nearside Front Lower Anti-roll bar linkage insecure |2.4.G.1|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor/inner sill |7.1.1 |a| |i||1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced arch (7.1.1 (a) (i))1
Seat belt anchorage prescribed area strength or continuity significantly reduced nearside outer sill (7.1.1 (a) (i))1
Nearside Front Upper Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch / chassis (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner / outer sill corroded (7.1.1 (a) (i))1
Offside Rear Brake pipe at imminent risk of failure or fracture front to rear (1.1.11 (a))1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Body component corroded and likely to cause injury (6.2.1 (a) (i))1
Nearside Front Service brake has no recorded effort at a wheel (1.2.1 (a) (ii))1
Rear Brake pipe connection leaking on an air braking system (1.1.11 (b) (i))1
Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings i |6.1.B.2|1
Nearside Rear Brake pipe excessively damaged flattened |1.1.11 |c||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced hole in sill (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill - arch (7.1.1 (a) (i))1
Nearside Rear Floor excessively deteriorated floor corroded through by mounting area (6.2.4 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength boot floor corroded through (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/top mount (5.3.6 (a) (i))1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear boot floor/ battery mount (6.2.2 (d) (i))1
Battery insecure and likely to fall from carrier hole in floor (4.13 (a) (ii))1
Nearside Rear Suspension arm corroded and seriously weakened lower arm |2.4.G.1|1
Nearside Front Suspension component mounting prescribed area is excessively corroded shocker mount area |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded shocker mount area |2.4.A.3|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor x2 |6.1.B.2|1
Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))1
Parking brake lever ratchet mechanism is excessively worn |3.1.5|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg | by top sus arm and anti roll bar mounting | |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg | by top sus and anti roll bar mounting | |5.3.6 |a| |i||1
Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor |5.3.6 |a| |i||1
Offside Front Seat belt affected by an insecure seat fixing |5.2.1b|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing section (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing section (5.3.6 (a) (i))1
Brake fluid contaminated Dirty (1.8 (a))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill area corroded (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill area corroded (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis under wheel arch |2.4.A.3|1
Offside Seat belt anchorage prescribed area is excessively corroded mid sill holed |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sills |5.2.6|1
Offside Front coil spring broken fouling on wheel on full lock |2.4.C.1a|1
Offside Front Power steering ram|s| leaking from a failed seal |2.3.3b|1
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt outer |2.4.G.2|1
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt outer |2.4.G.2|1
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheelarch |6.1.B.2|1
Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheelarch |6.1.B.2|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under side of chassis leg by suspension mount |6.1.B.2|1
Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides sills/lower quarter panals |6.1.1 |c| |i||1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced underbody to sill |6.1.1 |c| |i||1
Fuel cap/sealing device mounting flange/sealing method defective flap not opening |7.2.4c|1
Exhaust engine idle speed too high vehicle cutting out on idle |7.3.D.1|1
Rear coil spring broken both rear |2.4.C.1a|1
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits 1.582 |7.3.D.3|1
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced *** OUTER SILL END *** |7.1.1 |a| |i||1
Offside Rear Lower Seat belt anchorage likely to become detached in the event of a collision *** OUTER SILL END *** |7.1.1 |a| |ii||1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i))1
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i))1
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill and inner wheel arch |6.1.B.2|1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected strut top |5.3.6 |a| |ii||1
Brake pipe leaking on an air braking system front to rear |1.1.11 |b| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill aera |5.3.6 |a| |i||1
Front position lamp|s| not working both front side lights |1.1.A.3b|1
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits possibly due to exhaust leak |7.3.D.3|1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL |5.3.6 |a| |i||1
Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings sill to floor |6.1.B.2|1
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i))1
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chasis rail from the upper suspension arm mount to front of car (5.3.6 (a) (i))1
Nearside Passenger`s seat insecure |6.2.A.1|1
Braking system leaking Nearside front caliper |3.6.A.1|1
Offside Front Subframe mounting prescribed area is excessively corroded Chassis by |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is inadequately repaired chassis leg, incomplete weld (5.3.6 (a) (i))1
Offside Rear Braking system leaking brake caliper |3.6.A.1|1
Front Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction x2 (3.1 (a) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar area corroded (5.3.6 (a) (i))1
Speedometer clearly inoperative (7.8 (b) (ii))1
Undertray insecure And Fouling Both Sides Front Steering Arms In Operation (8.1.1 (b) (i))1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassi behind wheel |6.1.B.2|1
Offside Rear Lower Suspension arm has excessive play in a pin/bush |2.4.G.2|1
Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6|1
Offside Lower Suspension arm has excessive play in a ball joint |2.4.G.2|1
Centre Obligatory mirror insecure |8.1.1|1
Nearside Steering locking device missing track rod end |2.2.C.1g|1
Nearside Lower Steering locking device missing balljoint |2.2.C.1g|1
Offside Headlamp aim beam image obviously incorrect + wet inside lamp |1.8.A.1b|1
Offside Outer Seat belt anchorage prescribed area is excessively corroded Rear end of sill |5.2.6|1
Nearside Front Macpherson strut severely distorted |2.4.G.1|1
Offside Rear Lower Suspension arm pin or bush likely to become detached |5.3.4 |a| |ii||1
Offside Front Subframe mounting prescribed area is excessively corroded And holed |2.4.A.3|1
Seat belt anchorage prescribed area strength or continuity significantly reduced NSR outer sill / OSF inner sill jacking point (7.1.1 (a) (i))1
Rear Seat belt anchorage prescribed area strength or continuity significantly reduced NS + OS outer sills (7.1.1 (a) (i))1
Power steering pipe|s| or hose|s| leaking by steering rack |2.3.3b|1
Front Position lamp not working NS + OS (4.2.1 (a) (ii))1
Front Coil spring fractured or broken |5.3.1 |b| |i||1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill to floor (6.2.2 (d) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch (6.2.2 (d) (i))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch (6.2.2 (d) (i))1
Nearside Front Suspension component mounting prescribed area is excessively corroded chasis |2.4.A.3|1
Offside Suspension component mounting prescribed area is excessively corroded centre inner sill |2.4.A.3|1
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill marked with chalk (6.2.2 (d) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis, next to anti roll bar u shaped bush (5.3.6 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill front and rear (7.1.1 (a) (i))1
Suspension component mounting prescribed area is excessively corroded OFF AND NEARSIDE OUTER SILLS CORRODED |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg area (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg area (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasis leg x2 |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasis leg |5.3.6 |a| |i||1
Power steering malfunctioning assistance not constant (2.1.5 (a))1
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill up into wheel arch area (6.1.1 (c) (i))1
Offside Rear Body component insecure battery tray corroded and very insecure (6.2.1 (a) (i))1
Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt wish bone (5.3.4 (b) (ii))1
Rear Sub-frame attachment bracket/mounting insecure 1 bolt missing and 2 are loose (5.3.3 (a) (i))1
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting yellow chalk |6.2.2 |d| |i||1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting yellow chalk |6.2.2 |d| |i||1
Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Rear most sill (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Rear most sill (7.1.1 (a) (i))1
Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Nearside Steering arm has relative movement at its fixings |2.2.B.1h|1
Parking brake lever ratchet mechanism is broken |3.1.5|1
Front Brake disc significantly and obviously worn both sides (1.1.14 (a) (i))1
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill at jacking point (6.1.1 (c) (i))1
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill at jacking point (6.1.1 (c) (i))1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering as/marked |6.1.1 |c| |ii||1
Front Service brake excessively binding Both sides (1.2.1 (f))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength top of inner wing (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill and inner wheel arch |5.2.6|1
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced offside sill (6.1.1 (c) (i))1
Nearside Front Steering rack insecure |2.2.B.1a|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis section |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Subframe/antiroll bar mount (5.3.6 (a) (i))1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch/chassis (5.3.6 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch/chassis (5.3.6 (a) (i))1
Nearside Rear Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i||1
Offside Rear Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i||1
Power steering pipe/hose excessively damaged (2.1.5 (g) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner/chassis wing under bonnet (5.3.6 (a) (i))1
Rear Exhaust has a major leak of exhaust gases interpipe/tailpipe joint corroded through (6.1.2 (a))1
Rear Exhaust system insecure mounting broken away from exhaust (6.1.2 (a))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower arm front mounting |5.3.6 |a| |i||1
Centre Upper Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e|1
Nearside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected front of sill/floor (5.3.6 (a) (ii))1
Offside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected front of sill/floor (5.3.6 (a) (ii))1
Nearside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear sill area (5.3.6 (a) (ii))1
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner wing under wing (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under rear wing (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced under rear wing (7.1.1 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Lower seat belt mount (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mount |2.4.A.3|1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both side (6.2.2 (d) (i))1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected innere sill (5.3.6 (a) (ii))1
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis rail |5.3.6 |a| |ii||1
Nearside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings You nee/outer sills corroded/holes |6.1.B.2|1
Offside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner/outer sill corroded/holes |6.1.B.2|1
Centre Front Body has excessive displacement which may lead to loss of vehicle control Bonnet/front panel. |6.1.B.1a|1
Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2|1
Offside Front Main beam `tell-tale` not working |1.7.4c|1
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired Outer/inner sill (7.1.1 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Chassis leg (7.1.1 (a) (i))1
Exhaust has a major leak of exhaust gases centre box |6.1.2 |a||1
Exhaust has a major leak of exhaust gases rear (6.1.2 (a))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength extensive corrosion to front of near side front chassis rail area (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of off side sill area (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded Chassis Rail |2.4.A.3|1
Nearside Front position lamp|s| not working side |1.1.A.3b|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis leg , behind wheel (5.3.6 (a) (i))1
Nearside Rear Shock absorbers damaged to the extent that it does not function spring seat weak (5.3.2 (b))1
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded edge of floorpan |5.2.6|1
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded edge of floorpan |5.2.6|1
Offside Front Suspension component mounting prescribed area is excessively corroded anti-roll bar mounting area |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan |7.1.1 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting/crossmember mounting |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar /crossmember mounting |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area is excessively corroded Outer sheel arch |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch |2.4.A.3|1
Exhaust has a major leak of exhaust gases Tail Box (6.1.2 (a))1
Offside Rear Battery insecure and likely to fall from carrier boot floor holed excess corroded (4.13 (a) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill at jacking point (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed excess corroded (7.1.1 (a) (i))1
Offside Rear Brake pipe connection leaking on an air braking system (1.1.11 (b) (i))1
Nearside Front Front suspension locking device missing |2.5.A.4|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer and inner sill areas at seat mountings (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill areas at seat mounting (7.1.1 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill areas (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill areas (5.3.6 (a) (i))1
Nearside Rear Braking system leaking caliper leaking (1.1.3 (d))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis complete end marked (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing front chassis (5.3.6 (a) (i))1
Offside Rear Suspension arm likely to fail (5.3.3 (b) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti-roll bar (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti-roll bar (5.3.6 (a) (i))1
Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill section (7.1.1 (a) (i))1
Offside Rear Brake valve leaking |1.1.7 |d| |i||1
Emissions unable to be completed due to exhaust leak (8.2.2.2 (e))1
Nearside Front Position lamp not working side lamp. (4.2.1 (a) (ii))1
Front Headlamp lens seriously defective both headlamp lenses poor condition(no beam pattern) (4.1.1 (b) (ii))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill corroded and holed. (6.2.2 (d) (i))1
Nearside Rear Upper Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced undersill (7.1.1 (a) (i))1
Nearside Front Electrical wiring insecure and in contact with sharp edges abs wiring (4.11 (a) (ii))1
Offside Front Electrical wiring insecure and in contact with sharp edges abs wiring (4.11 (a) (ii))1
Position lamp switch does not illuminate the front and rear position lamps with a single operation |1.1.A.2|1
Nearside Front Seat belt insecurely fixed to the seat |5.2.1a|1
Front Front position lamp|s| not working offside/nearside |1.1.A.3b|1
Anti-roll bar mounting has an unsafe modification fitted incorrectly (5.3.3 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner arch (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside and nearside inner&outer sills (5.3.6 (a) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced boot floor (6.1.1 (c) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting back up sill (6.2.2 (d) (i))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting anti roll bar mounting piont (6.2.2 (d) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting anti roll bar mounting piont (6.2.2 (d) (i))1
Nearside Front Suspension component mounting prescribed area is excessively corroded inner sills |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sills |2.4.A.3|1
Front Suspension component mounting prescribed area is excessively corroded both front suspension rails |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sills |2.4.A.3|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Within 30cm of seat mount (6.1.1 (c) (i))1
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing panel to chassis |6.1.1 |c| |i||1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced foot well outriger |6.1.1 |c| |i||1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced foot well outriger |6.1.1 |c| |i||1
Nearside Front Power steering pipe/hose leaking to cooler |2.1.5 |a||1
Nearside Rear Fluid suspension leaking |2.4.D.2|1
Brake hose twisted |found during steering lock to lock check| |2.2.D.2b|1
Nearside Rear Outer Body has a sharp edge caused by corrosion sill |6.1.C.1|1
Offside Rear Outer Body has a sharp edge caused by corrosion sill |6.1.C.1|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis Corroded (6.1.1 (c) (i))1
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner wing (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected anti-roll bar and suspension arm mounting (5.3.6 (a) (ii))1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected anti-roll bar and suspension arm mounting (5.3.6 (a) (ii))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear inner sill (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced corroded outer seal (7.1.1 (a) (i))1
Nearside Rear front brake juddering severely |3.7.A.2b|1
Nearside Front Suspension component mounting prescribed area is excessively corroded flitch |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded flitch |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3|1
Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced corroded |7.1.1 |a| |i||1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced corroded |7.1.1 |a| |i||1
Rear Suspension arm corroded and seriously weakened both |5.3.3 |b| |i||1
Rear Sub-frame corroded and seriously weakened |5.3.3 |b| |i||1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Floor |7.1.1 |a| |i||1
Headlamp aim so that beam "kick up" is not visible on the screen O/S |4.1.2 |a||1
Headlamp aim projected beam image is obviously incorrect requires headlamp polishing (4.1.2 (c))1
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch chassis rail |2.4.A.3|1
Offside Suspension component mounting prescribed area is excessively corroded inner wheel arch chassis rail |2.4.A.3|1
Nearside Front Leaf spring fractured |2.4.B.1a|1
Nearside Rear Leaf spring fractured |2.4.B.1a|1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i))1
Offside Rear Seat belt anchorage prescribed area is inadequately repaired Outer sill area. Patch becoming detached (7.1.1 (a) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Floor (7.1.1 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill /floor (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill holed near front suspension (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill/ inner arch |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill / inner arch |5.2.6|1
Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))1
Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Inner wheel arch (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded Floor to sill |2.4.A.3|1
Nearside Front Anti-roll bar attachment bracket/mounting insecure BOLT MISSING (5.3.3 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside front inner wheel arch |chassis leg| |5.3.6 |a| |i||1
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded shockabsorber mounting |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded outrigger near subframe mounting |2.4.A.3|1
Offside Front Anti-roll bar linkage insecure and impairing directional stability detached. (5.3.3 (a) (ii))1
Nearside Front Anti-roll bar linkage insecure and impairing directional stability detached. (5.3.3 (a) (ii))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed within 30cm. (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed within 30cm. (7.1.1 (a) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill in mounting areas of front seat belt (7.1.1 (a) (i))1
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed/corroded |6.1.1 |c| |i||1
Offside Rear Body component damaged and likely to cause injury lamp cluster |6.2.1 |a| |i||1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill corroded (6.1.1 (c) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill corroded. (6.1.1 (c) (i))1
Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Bottom arm mounting point corroded. (5.3.6 (a) (i))1
Front Undertray likely to become detached Tray adrift at rear and fouling steering arms. (6.2.1 (a) (ii))1
Nearside Front Body panel insecure Wing. (6.2.1 (a) (i))1
Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill corroded. (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg front wheel arch |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill/rear floor |5.2.6|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg |marked with yellow chalk | |2.4.A.3|1
Brake performance not tested due to corroded lower arm |3.7.A.1|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded floor and inner sill |5.2.6|1
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded arch |5.2.6|1
Offside Front Anti-roll bar has excessive play in a ball joint link arm |2.4.G.2|1
Nearside Front Anti-roll bar has excessive play in a ball joint link arm |2.4.G.2|1
Offside Rear Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3|1
Exhaust emissions likely to be affected by an exhaust leak slight blow from rear exhaust (8.2.1.1 (b))1
Nearside Seat belt anchorage prescribed area is excessively corroded inner/outer sill |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded inner/outer sill |5.2.6|1
Nearside Suspension component mounting prescribed area is excessively corroded inner / outer sills |2.4.A.3|1
Offside Suspension component mounting prescribed area is excessively corroded inner /outer sills |2.4.A.3|1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer inner sills |2.4.A.3|1
Offside Rear Suspension spring mounting prescribed area is excessively corroded inner / outer sills |2.4.A.3|1
Nearside Front Suspension spring mounting prescribed area is excessively corroded chassis out rigger |2.4.A.3|1
Offside Front Suspension spring mounting prescribed area is excessively corroded chassis out rigger |2.4.A.3|1
Exhaust has a major leak of exhaust gases Centre pipe broken (6.1.2 (a))1
Emissions unable to be completed Due to broken centre pipe (8.2.1.2 (d))1
Nearside Rear Upper Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))1
Offside Rear Upper Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength boot floor corroded in multiple places (5.3.6 (a) (i))1
Nearside Rear Brake hose excessively damaged ferrul corroded |1.1.12 |b| |ii||1
Offside Rear Brake hose excessively damaged ferrul corroded |1.1.12 |b| |ii||1
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis |6.2.2 |d| |i||1
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis |6.2.2 |d| |i||1
Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill in multiple places |6.2.2 |d| |i||1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting CHASSIS LEG (6.2.2 (d) (i))1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting CHASSIS LEG (6.2.2 (d) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor |6.1.1 |c| |i||1
Exhaust has a major leak of exhaust gases centre joint (6.1.2 (a))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength engine bay various places (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength engine bay various places (5.3.6 (a) (i))1
Seat belt anchorage prescribed area strength or continuity significantly reduced both front sills (7.1.1 (a) (i))1
Front Position lamp not working Both |4.2.1 |a||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced NS rear outer sill corroded/cracked |7.1.1 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner & outer Sill (5.3.6 (a) (i))1
Seat belt anchorage prescribed area is excessively corroded rear of o/s and n/s sills |5.2.6|1
Steering locking device missing n/s/f upper and lower ball joints split pins missing |2.2.C.1g|1
Nearside Front Steering retaining device missing split pin missing |2.2.C.1g|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing chassis member (5.3.6 (a) (i))1
Rear Exhaust has a major leak of exhaust gases silencer joint |6.1.2 |a||1
Offside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Front Suspension component mounting prescribed area is excessively corroded outrigger |2.4.A.3|1
Offside Suspension component mounting prescribed area is excessively corroded sill to floor |2.4.A.3|1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))1
Offside Front Lower Anti-roll bar linkage ball joint likely to become detached is detached |5.3.4 |a| |ii||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner flitch under bonnet (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner flitch under bonnet (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill (5.3.6 (a) (i))1
Nearside Seat belt anchorage prescribed area is excessively corroded mid floor |5.2.6|1
Horn not working missing (7.7 (a))1
Central Exhaust has a major leak of exhaust gases exhaust flange joint (6.1.2 (a))1
Nearside Front Brake performance not tested |3.7.A.1|1
Offside Front Brake performance not tested |3.7.A.1|1
Offside Rear Brake performance not tested |3.7.A.1|1
Nearside Rear Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d|1
Nearside Rear Rear position lamp|s| incorrect colour damaged, showing white |1.1.A.3e|1
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill |5.3.6 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill has excessive corrosion |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill has excessive corrosion |7.1.1 |a| |i||1
Nearside Front Subframe mounting prescribed area is excessively corroded box section adjacent fore mounting. |2.4.A.3|1
Offside Lower Seat belt anchorage prescribed area is excessively corroded rear of inner sill section. |5.2.6|1
Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))1
Nearside Front Upper Suspension arm pin or bush excessively worn front bush (5.3.4 (a) (i))1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced and outer sill (6.1.1 (c) (i))1
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced and outer sill (6.1.1 (c) (i))1
Nearside Subframe mounting prescribed area is excessively corroded underside. marked. |2.4.A.3|1
Offside Subframe mounting prescribed area is excessively corroded underside. marked. |2.4.A.3|1
Rear Anti-roll bar linkage has excessive play in a ball joint Both |2.4.G.2|1
Offside Rear Sub-frame attachment bracket/mounting bolt missing |2.4.G.1|1
Offside Front Driver`s seat insecure corrosion near seat mount |6.2.A.1|1
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing in 2 places |2.4.A.3|1
Offside Seat belt anchorage prescribed area is excessively corroded sill back |5.2.6|1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill / floor (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced chassis rail torn (7.1.1 (a) (i))1
Offside Rear Brake valve leaking Caliper leaking (1.1.7 (d) (i))1
Nearside Front Service brake lagging in operation lazy in operation 37% imbalance (1.2.1 (d))1
Exhaust has a major leak of exhaust gases centre section to rear silencer joint, flanges corroded away (6.1.2 (a))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail, anti roll bar mounting point (5.3.6 (a) (i))1
Nearside Suspension component mounting prescribed area is excessively corroded chassis rail at front |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill backing |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded 2 places |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded sill under side |5.2.6|1
Nearside Front Anti-roll bar linkage has excessive play in a ball joint and offside |2.4.G.2|1
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint and offside |2.4.G.2|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis same on offside |2.4.A.3|1
Battery insecure - terminal |1.9.1|1
Nearside Anti-roll bar linkage cracked |2.4.G.1|1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch area (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wing / Anti Roll Bar Mounting (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis Rail (5.3.6 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wing/ Anti Roll Bar Mounting (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Chassis Rail (5.3.6 (a) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rail (6.1.1 (c) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jack point (5.3.6 (a) (i))1
Rear Exhaust has a major leak of exhaust gases box (6.1.2 (a))1
Offside Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corroded front and rear (6.2.2 (d) (i))1
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch (6.2.2 (d) (i))1
Nearside Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch (6.2.2 (d) (i))1
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting holed next to bATTERY (6.1.6 (i) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill hole (7.1.1 (a) (i))1
Offside Electrical wiring insecure earth strap |1.9.2a|1
Anti-roll bar linkage insecure Near side front |2.4.G.1|1
Subframe mounting prescribed area is excessively corroded Near side front inner upper |2.4.A.3|1
Seat belt anchorage prescribed area is excessively corroded Offside rear inner |5.2.6|1
Seat belt anchorage prescribed area is excessively corroded Near side rear inner |5.2.6|1
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced still holed (6.1.1 (c) (i))1
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/jacking point (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/jacking point (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill floor (5.3.6 (a) (i))1
Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill closing/outer wheel arch (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis under wing |2.4.A.3|1
Nearside Rear Valve stem seriously damaged leaking (5.2.3 (j))1
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inside Door As Marked (6.2.2 (d) (i))1
Fuel pipe insecure (6.1.3 (a) (i))1
Body insecure (6.2.2 (a) (i))1
Offside Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a|1
Headlamp not working on main beam (4.1.1 (a) (ii))1
Front Direction indicator incorrect colour o/s n/s (4.4.3 (a))1
Offside Rear Subframe mounting prescribed area damaged to the extent that control of the vehicle is likely to be adversely affected subframe bolts snapped (5.3.6 (a) (ii))1
Nearside Rear Anti-roll bar attachment bracket/mounting fractured (5.3.3 (b) (ii))1
Supplementary restraint system warning lamp indicates a fault airbag light flashing indicating fault (7.1.6 (a))1
Electronic parking brake warning indicates a malfunction (1.1.6 (e))1
Indicator switch inoperative (4.4.2 (a) (ii))1
Central Rear Brake performance unable to be tested (1.2.1 (g))1
Central Rear Brake pipe likely to become detached or damaged brake pipe has no fixings (1.1.11 (d) (ii))1
Position lamp switch does not illuminate the front and rear position lamps with a single operation (4.2.2 (a))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner lower arch inner sill area (5.3.6 (a) (i))1
Front Position lamp not working side lamps (4.2.1 (a) (ii))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill & floor (6.1.1 (c) (i))1
Offside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced Chassis (6.1.1 (d) (i))1
Offside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced End of inner sill not fully seam welded (6.1.1 (d) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced End of sill & wheel arch (6.1.1 (c) (i))1
Nearside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced Chassis not fully seam welded (6.1.1 (d) (i))1
Nearside Rear Upper Suspension arm attachment bracket/mounting insecure inner arm bolts (5.3.3 (a) (i))1
Offside Rear Upper Suspension arm attachment bracket/mounting insecure inner arm bolts (5.3.3 (a) (i))1
Front Hazard warning lamps inoperative both (4.4.1 (e))1
Electrical wiring insulation in such a condition there is an imminent risk of fire or formation of sparks wiring in boot to battery (4.11 (c) (iii))1
Offside Steering locking device missing track rod end (2.1.3 (d))1
Nearside Steering locking device missing track rod end (2.1.3 (d))1
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt lower (5.3.4 (b) (ii))1
Offside Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii))1
Nearside Rear Inner Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced wheel arch (6.1.1 (b) (ii))1
Offside Rear Inner Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced inner sill and wheel arch (6.1.1 (b) (ii))1
Exhaust emissions carbon monoxide content excessive 6 % (8.2.1.2 (b))1
Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced floor pan area (6.1.1 (a) (i))1
Nearside Rear Suspension component mounting prescribed area is inadequately repaired Rear of sill not seam welded on inner edge (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area is inadequately repaired Sill not seem welded along inner edge (5.3.6 (a) (i))1
Rear Suspension component mounting prescribed area is excessively corroded both inner sills |2.4.A.3|1
Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))1
Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced floor/chassis (7.1.1 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer of sill/floor (5.3.6 (a) (i))1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower panel (5.3.6 (a) (i))1
Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt split and insecure (2.1.3 (g) (ii))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to wheel arch (5.3.6 (a) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sills rotted (6.1.1 (c) (i))1
Nearside Front Brake pipe likely to become detached or damaged flexi pipe not clipped in brake pipe fouling body (1.1.11 (d) (ii))1
Offside Front Brake pipe likely to become detached or damaged flexi pipe not clipped in brake pipe fouling body (1.1.11 (d) (ii))1
Brake pipe likely to become detached or damaged front to rear brake pipe not secured properly (1.1.11 (d) (ii))1
Front Position lamp not working n/s and o/s front (4.2.1 (a) (ii))1
Offside Rear Brake lever has restricted free movement handbrake actuating arm on caliper (1.1.15 (e))1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced centre (6.1.1 (c) (i))1
Rear fog lamp adversely affected by the operation of another lamp reversing light (4.5.4 (b))1
Offside Seat belt anchorage prescribed area is excessively corroded centr floor |5.2.6|1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch at shocker mount (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch upper at shocker mount (5.3.6 (a) (i))1
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Seat mount holed inner sill. (7.1.1 (a) (i))1
Oil leaking excessively from engine oil spraying from rear right of cam cover (8.4.1 (a) (i))1
Rear fog lamp switch insecure (4.5.3 (a))1
Exhaust emissions carbon monoxide content excessive actual value 5.15%, tested as first used november 1992, limit 3.50% (8.2.1.2 (b))1
Offside Front Inner Horn not working (7.7 (a))1
Nearside Front Inner Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii))1
Offside Front Anti-lock braking system component excessively damaged (1.6 (e))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sills (7.1.1 (a) (i))1
Nearside Rear Lower Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))1
Nearside Seat belt anchorage prescribed area is excessively corroded sill chalked |5.2.6|1
Nearside Front Upper Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg under bonnet |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg/ inner wheel arch under side of the chassis leg |2.4.A.3|1
Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner upper wheel arch by spring mount (5.3.6 (a) (i))1
Emissions not tested Exhaust blowing |8.2.1.2 |d||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassie rail with in 30 cm of front subframe and anti roll bar mounting |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassie rail within 30 cm of subframe and anti roll bar mounting |5.3.6 |a| |i||1
Nearside Headlamp not working on main beam lamp insecure and inside engine bay |1.7.5a|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill panel not welded to body |5.2.6|1
Offside Front Braking system leaking caliper |3.6.A.1|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer and inner sill |5.2.6|1
Offside Rear Hydraulic fluid leaking excessively (8.4.1 (a) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear sill (6.1.1 (c) (i))1
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded siil |2.4.A.3|1
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting seal. |6.2.2 |d| |i||1
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting seal. |6.2.2 |d| |i||1
Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill area to floor section (6.1.1 (c) (i))1
Offside Rear Anti-roll bar corroded and seriously weakened Bar corroded bent rubbing on chassis (5.3.3 (b) (i))1
Offside Front Headlamp light intensity severely reduced |4.1.4 |a||1
Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened Chassis rail |5.3.3 |b| |i||1
Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis rail |5.3.3 |b| |i||1
Rear Exhaust has a major leak of exhaust gases bracket causing hole in silencer (6.1.2 (a))1
Nearside Lower Seat belt anchorage prescribed area is excessively corroded in side sill |5.2.6|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower arm mounting (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/inner wing (5.3.6 (a) (i))1
Nearside Front Steering locking device missing ball joint split pin (2.1.3 (d))1
Nearside Front Lower Steering locking device missing ball joint split pin (2.1.3 (d))1
Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/floor (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section (5.3.6 (a) (i))1
Offside Headlamp light intensity severely reduced flickering |4.1.4 |a||1
Offside Rear Direction indicator incorrect colour |4.4.3 |a||1
Offside Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d|1
Offside Rear Rear position lamp|s| insecure |1.1.A.3a|1
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill area (5.3.6 (a) (i))1
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded Sill corroded |5.2.6|1
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded Sill corroded |5.2.6|1
Battery insecure and sitting in pool water |1.9.1|1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassie leg |6.1.1 |c| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassie leg |6.1.1 |c| |i||1
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill hole |6.1.1 |c| |i||1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill hole |6.1.1 |c| |i||1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner door sill within 30cm of seat belt mount |6.1.B.2|1
Nearside Rear Outer Body panel corroded and likely to cause injury sill (6.2.1 (a) (i))1
Nearside Rear Inner Body panel corroded and likely to cause injury (6.2.1 (a) (i))1
Offside Rear Outer Body panel corroded and likely to cause injury (6.2.1 (a) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced leg (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced leg (6.1.1 (c) (i))1
Nearside Rear Inner Integral body structure is deformed and structural rigidity is significantly reduced Sill |6.1.1 |a| |i||1
Offside Rear Coil spring fractured or broken spring broken (5.3.1 (b) (i))1
Front position lamp|s| not working both front |1.1.A.3b|1
Central Rear Brake pipe inadequately clipped |3.6.B.1|1
Rear Brake pipe inadequately clipped |3.6.B.1|1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS LEG HOLED AND CORRODED (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS LEG HOLED AND CORRODED (6.1.1 (c) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced OUTER SILL HOLED AND CORRODED (6.1.1 (c) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced OUTER SILL HOLED AND CORRODED (6.1.1 (c) (i))1
front brake recording little or no effort |3.7.B.5a|1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corroded (6.1.1 (c) (i))1
Nearside Position lamp not working and offside front (4.2.1 (a) (ii))1
Nearside Front Anti-roll bar linkage has excessive play in a ball joint Drop link lower balljoint has excess play. |2.4.G.2|1
Nearside Rear coil spring broken Suspension strut coil spring broken at top. |2.4.C.1a|1
Offside Rear coil spring broken Suspension strut coil spring broken at top. |2.4.C.1a|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded Excess corrosion to holes to nearside outer sill within 12" of nearside rear suspension. |2.4.A.3|1
Nearside Front Braking system leaking caliper to hose |3.6.A.1|1
Offside Rear Upper Suspension arm has excessive play in a pin/bush outer bush |2.4.G.2|1
Suspension component mounting prescribed area is excessively corroded front of offside chassis within 30cm of upper arm/anti-roll bar |2.4.A.3|1
Exhaust has a major leak of exhaust gases rear silencer joint |6.1.2 |a||1
Emissions not tested rear silencer joint leaking |8.2.1.2 |d||1
Exhaust Lambda reading after 2nd fast idle outside specified limits 1.094 (8.2.1.2 (c))1
Exhaust has a major leak of exhaust gases between centre section and rear silencer at join (6.1.2 (a))1
Offside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Power steering component|s| leaking power steering pipe leaking |2.3.3b|1
Anti-roll bar linkage has excessive play in a ball joint o/s and n/s rear |2.4.G.2|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s and n/s front floors |6.1.B.2|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s outer sill |6.1.B.2|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s inner sill |6.1.B.2|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s and n/s inner wings |6.1.B.2|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s front inner wheel arch |6.1.B.2|1
Nearside Seat belt anchorage prescribed area is excessively corroded sill and sill to floor panel |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded sill and sill to floor panel |5.2.6|1
Offside Front Lower Radius arm has excessive play in a ball joint |2.4.G.2|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis/floorpan |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis/floorpan |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill/inner sill |2.4.A.3|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced DRVERS FLOOR OUTRIGGER. (6.1.1 (c) (i))1
Offside Front Lower Integral body structure has excessive corrosion which adversely affects braking or steering chassis at outrigger (6.1.1 (c) (ii))1
Nearside Rear Lower Integral body structure inadequately repaired such that it is likely to adversely affect braking or steering inner sill (6.1.1 (d) (ii))1
Exhaust has a major leak of exhaust gases at cat (6.1.2 (a))1
Offside Headlamp aim projected beam image is obviously incorrect Dip (4.1.2 (c))1
Undertray insecure damaged (8.1.1 (b) (i))1
Nearside Rear Body component corroded and likely to cause injury wheel arch (6.2.1 (a) (i))1
Nearside Rear Body component corroded and likely to cause injury sill (6.2.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area fractured significantly reducing structural strength chassis (5.3.6 (a) (i))1
Offside Front Anti-roll bar insecure and impairing directional stability link rod (5.3.3 (a) (ii))1
Stop lamp not working o s |1.2.1b|1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail (5.3.6 (a) (i))1
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits exhaust leak at rear |7.3.D.3|1
Emissions not tested exhaust major leak |7.3.A.1|1
Offside Power steering component|s| leaking from a failed seal steering rack leaking |2.3.3b|1
Nearside Rear Brake hose excessively damaged |3.6.B.4d|1
Offside Front Position lamp light intensity significantly reduced side light (4.2.3 (a) (ii))1
Rear Electrical wiring insulation so damaged or deteriorated it is likely to cause a short-circuit earth to diff (4.11 (c) (ii))1
Offside Front Tie bar/rod attachment bracket/mounting insecure drop link |2.4.G.1|1
Offside Rear Inner Brake pipe inadequately clipped fuel/brake pipes insecure |3.6.B.1|1
Rear fog lamp does not emit a steady red light Fog lamp is white not red (4.5.4 (a))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill corroded through (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill corroded through (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension mounting area (5.3.6 (a) (i))1
Offside Rear Brake relay lever has restricted free movement calliper arm inoperative (1.1.15 (e))1
Offside Rear Brake relay lever has restricted free movement caliper (1.1.15 (e))1
Anti-roll bar ball joint excessively worn |5.3.4 |a| |i||1
Nearside Front Upper Macpherson strut ball joint dust cover missing (5.3.4 (b) (ii))1
Nearside Front Subframe mounting prescribed area is excessively corroded FLOOR |2.4.A.3|1
Offside Front Subframe mounting prescribed area is excessively corroded FLOOR |2.4.A.3|1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting engine bay |6.2.2 |d| |i||1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill to wheel arch (7.1.1 (a) (i))1
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill/wheel arch |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill/ wheel arch |2.4.A.3|1
Offside Stop lamp(s) lens defective such that the emitted light is adversely affected (4.3.1 (b) (ii))1
Nearside Rear Sub-frame attachment bracket/mounting insecure |2.4.G.1|1
Offside Rear Sub-frame attachment bracket/mounting insecure |2.4.G.1|1
Emissions not tested Engine started to miss-fire during 2nd fast idle - unable to assess (8.2.1.2 (d))1
Nearside Rear Sub-frame attachment bracket/mounting insecure and impairing directional stability (5.3.3 (a) (ii))1
Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected main chassis (5.3.6 (a) (ii))1
Offside Front Anti-roll bar attachment bracket/mounting likely to become detached main chassis (5.3.3 (a) (ii))1
Offside Rear Upper Anti-roll bar linkage likely to become detached (5.3.3 (a) (ii))1
Steering column has excessive movement up and down side to side play (2.2.2 (a))1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill panel (5.3.6 (a) (i))1
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits 7.500 c/o (8.2.1.2 (a))1
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits 233 h/c (8.2.1.2 (b))1
Exhaust Lambda reading after 2nd fast idle outside specified limits .809 lambda (8.2.1.2 (c))1
Emissions not tested engine misfiring (8.2.1.2 (d))1
Nearside Direction indicator not working front, rear and side repeater (4.4.1 (a) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above anti roll bar d bush (5.3.6 (a) (i))1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill at rear (6.2.2 (d) (i))1
Nearside Rear Direction indicators not working |1.4.A.2c|1
Central Lower Floor excessively deteriorated underside of vehicle (6.2.4 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength t.c.a (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded outer chassis area |2.4.A.3|1
Offside Front Steering component mounting prescribed area is excessively corroded outer chassis area |2.2.C.1h|1
Rear Exhaust has a major leak of exhaust gases clamp (6.1.2 (a))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear sub-frame mount (5.3.6 (a) (i))1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill within 30cm of seatbelt mount |6.1.B.2|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor pan within 30cm of Seat Mount |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Within 30cm of Sub frame mount |6.1.B.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Within 30cm of Seat mount |6.1.B.2|1
Offside Rear Suspension arm attachment bracket/mounting insecure |2.4.G.1|1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer body sill (7.1.1 (a) (i))1
Offside Front Road wheel badly damaged |4.2.A.1a|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill rusted |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill rusted |6.1.B.2|1
Nearside Seat belt anchorage prescribed area is excessively corroded Sill panel |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded Sill panel |5.2.6|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Anti roll bar mounting/chassis. (5.3.6 (a) (i))1
Offside Suspension component mounting prescribed area is excessively corroded Outer sill |2.4.A.3|1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting and outer sills (6.2.2 (d) (i))1
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting and outer sills (6.2.2 (d) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded antiroll bar mounting [engine bay] |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis /inner wing |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis /inner wing |2.4.A.3|1
Offside Rear Anti-roll bar linkage insecure broken |2.4.G.1|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill corroded (7.1.1 (a) (i))1
Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch/chassis. (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area is inadequately repaired outer sill. |filler| |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill / wheel arch |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill / wheel arch |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill / wheel arch |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill |filler| |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill / wheel arch |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired Wheel arch, non continuous welding. (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill. (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area is inadequately repaired Wheel arch, non continuous welding/plate not fully attached. (7.1.1 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside front anti roll bar mounting point (5.3.6 (a) (i))1
Brake performance unable to be tested Brake pipe leaking (1.2.1 (g))1
Offside Front Position lamp not working 1 x 501 bulb fitted (4.2.1 (a) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Above anti roll bar D bush Mount (5.3.6 (a) (i))1
Exhaust has a major leak of exhaust gases middle section (6.1.2 (a))1
Brake pipe leaking |front to rear| |3.6.A.1|1
Offside Rear Suspension component mounting prescribed area is excessively corroded |inner and outer sill area| |2.4.A.3|1
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))1
Offside Front Obligatory mirror missing |3.3 |a||1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Drivers side rear sill panel excessively corroded. |6.2.2 |d| |i||1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Passengers side rear sill panel excessively corroded. |6.2.2 |d| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting area |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting area |5.3.6 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill lip. (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced arch/back of sill. (7.1.1 (a) (i))1
Brake lever has insufficient reserve travel handbrake. (1.1.2 (a))1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front and rear sill (6.1.1 (c) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount (5.3.6 (a) (i))1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sills |6.1.B.2|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sills |6.1.B.2|1
Offside Front Anti-roll bar ball joint likely to become detached is detached (5.3.4 (a) (ii))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill area within 30cm of seatbelt/mounting points. (6.1.1 (c) (i))1
Offside Front Brake disc significantly and obviously worn Inner face. (1.1.14 (a) (i))1
Exhaust emissions likely to be affected by an exhaust leak Join from middle to rear has leak. (8.2.1.1 (b))1
Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced body sill (7.1.1 (a) (i))1
Offside Rear Brake pipe connection leaking on a hydraulic braking system |1.1.11 |b| |ii||1
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both front chassis legs |6.1.1 |c| |i||1
Brake performance not tested due to leak |1.2.1 |g||1
Drivers view of an obligatory external mirror materially affected by an obstruction (3.1 (a) (ii))1
Nearside Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii||1
Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i||1
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i||1
Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i||1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill |6.1.1 |c| |i||1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill |6.1.1 |c| |i||1
Offside Front Shock absorbers has an excessively worn bush |5.3.2 |c||1
Rear Anti-roll bar linkage ball joint excessively worn Both rears |5.3.4 |a| |i||1
Anti-roll bar pin or bush excessively worn Both rear d bushes |5.3.4 |a| |i||1
Brake disc in such a condition that it is seriously weakened Both fronts excessively corroded |1.1.14 |a| |ii||1
Brake disc in such a condition that it is seriously weakened Both rears excessively corroded |1.1.14 |a| |ii||1
Nearside Rear Suspension arm pin or bush excessively worn Upper and lower arms |5.3.4 |a| |i||1
Offside Rear Suspension arm pin or bush excessively worn Upper and lower arms |5.3.4 |a| |i||1
Service brake excessively binding Both rears |1.2.1 |f||1
Central Front Power steering pipe/hose corroded such that the steering is adversely affected |2.1.5 |g| |ii||1
Electrical wiring connectors for braking disconnected ABS Control unit (4.11 (a) (iii))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area (6.1.1 (c) (i))1
Offside Rear Seat belt anchorage prescribed area is excessively corroded of sill |5.2.6|1
Nearside Front Brake pipe connection leaking on a hydraulic braking system (1.1.11 (b) (ii))1
Nearside Front Upper Body panel corroded and likely to cause injury (6.2.1 (a) (i))1
Rear Brake disc contaminated both side (1.1.14 (b))1
Offside Front Outer Anti-roll bar linkage ball joint likely to become detached has detached |5.3.4 |a| |ii||1
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced battery mount (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar inner-mount area (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar inner-mount area (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill panel holed |7.1.1 |a| |i||1
Brake performance not tested due to leaking caliper |3.7.A.1|1
Offside Headlamp not working on dipped beam Aim not checked |1.7.5a|1
Nearside Seat belt anchorage prescribed area is excessively corroded Rear of sill |5.2.6|1
Front Suspension component mounting prescribed area is excessively corroded chassis @ antiroll bar mountings n/s & o/s |2.4.A.3|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer and inner sills (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis - in front and behind roll bar (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area is inadequately repaired anti roll bar outside of chassis (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area is inadequately repaired anti roll bar - outside of chassis (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind anti roll bar mounting (5.3.6 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded inside wheel arch CHASSIS area |2.4.A.3|1
Offside Front Inner Suspension component mounting prescribed area is excessively corroded inside wheel arch CHASSIS area |2.4.A.3|1
Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill area. |6.1.B.2|1
Nearside Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d|1
Stop lamp has less than 50% of the light sources illuminating both |1.2.1b|1
Offside Front Drivers door hinge insecure (6.2.3 (c) (ii))1
Parking brake lever has excessive movement indicating incorrect adjustment no reserve travel (1.1.6 (c))1
Nearside Front Suspension component mounting prescribed area is excessively corroded upper on chassis |2.4.A.3|1
Offside Rear Exhaust system not adequately supported |7.1.1|1
Nearside Front Upper Suspension arm corroded and seriously weakened |2.4.G.1|1
Offside Front Upper Suspension arm corroded and seriously weakened |2.4.G.1|1
Offside Front Service brake imbalanced across an axle (1.2.1 (b) (i))1
Brake performance unable to be tested osr break grinding (1.2.1 (g))1
Nearside Rear Lower Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Rear Upper Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Rear Lower Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer and inner sill |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer and inner sill |6.1.B.2|1
Brake performance not tested offside front brake binding to excess (1.2.1 (g))1
Nearside Seat belt anchorage prescribed area is excessively corroded body sill |5.2.6|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/ chassis area (5.3.6 (a) (i))1
Nearside Front position lamp|s| not working and o/s |1.1.A.3b|1
Offside Body component damaged and likely to cause injury door mirror cover |6.2.1 |a| |i||1
Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired CHASSIS RIGGER (6.2.2 (d) (ii))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced FLOOR AREA (6.1.1 (c) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced undersill area |7.1.1 |a| |i||1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill has corroded away (6.1.1 (c) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis At Anti Roll Bar Mounting |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis At Anti Roll Bar Mounting |5.3.6 |a| |i||1
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i||1
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i||1
Offside Front Brake hose leaking on a hydraulic braking system |1.1.12 |c| |ii||1
Nearside Front Suspension component mounting prescribed area is excessively corroded at chassis leg |2.4.A.3|1
Offside Front Seat belt anchorage prescribed area is excessively corroded at rear of sill panel |5.2.6|1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Large hole and corrosion by front suspension mounting. (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Large hole and corrosion by suspension mounting. (6.1.1 (c) (i))1
Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill holed and corroded. (6.1.1 (c) (i))1
Braking system leaking (1.1.3 (d))1
Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sills rear corroded (6.1.1 (c) (i))1
Offside Rear Outer Integral body structure is deformed and structural rigidity is significantly reduced (6.1.1 (a) (i))1
Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front wings corroded at bottom edge (6.1.1 (c) (i))1
Offside Front Lower Integral body structure is deformed and structural rigidity is significantly reduced (6.1.1 (a) (i))1
Battery insecure no securing device fitted |1.9.1|1
Rear Exhaust has a major leak of exhaust gases section |6.1.2 |a||1
Emissions not tested note. Readings are high even with exhaust blowing. Expect emissions test to fail unless repairs are carried out. (8.2.1.2 (d))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail at anti roll bar mounting (5.3.6 (a) (i))1
Nearside Front Anti-roll bar attachment bracket/mounting damaged and seriously weakened mounting bolt broken (5.3.3 (b) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor area middle to rear of inner sill/floor (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/floor (7.1.1 (a) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/floor (7.1.1 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door sill (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door sill (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing under wheel arch (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing under wheel arch (5.3.6 (a) (i))1
Central Front Service brake lagging in operation both sides (1.2.1 (d))1
Brake performance not tested due to n/s/r brake being stuck on (1.2.1 (g))1
Rear Exhaust has a major leak of exhaust gases joint (will need middle and rear (6.1.2 (a))1
Nearside Anti-roll bar linkage damaged and seriously weakened |2.4.G.1|1
Brake performance not tested leaking brake line |3.7.A.1|1
Exhaust emissions likely to be affected by an exhaust leak centre to rear (8.2.1.1 (b))1
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill rusted and holed (5.3.6 (a) (i))1
Nearside Front Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b|1
Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering chassis corrosion off side front inner wheel arch (6.1.1 (c) (ii))1
Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired near side sill corrosion within 30cm of seatbelt mount and jacking point (6.2.2 (d) (ii))1
Exhaust emissions carbon monoxide content at idle excessive then engine over heated |7.3.D.4|1
Seat belt anchorage prescribed area is excessively corroded rear of offside sill |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch / sill end area (7.1.1 (a) (i))1
Nearside Front Brake relay lever has restricted free movement Restricted brake. (1.1.15 (e))1
Nearside Rear Hydraulic brake calliper damaged and braking performance affected Hand brake lever and cable operation at maximum movement at caliper/ Partially seized on. (1.1.16 (a) (ii))1
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced Plastic lens misty. (4.1.4 (b))1
Offside Front Headlamp has a product on the lens so that the light output is severely reduced Plastic lens misty. (4.1.4 (b))1
Front Undertray likely to become detached Front under tray not secured in wheel arch areas. (6.2.1 (a) (ii))1
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt Perished and split. (5.3.4 (b) (ii))1
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt Perished and split. (5.3.4 (b) (ii))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill and inner sill to floor (5.3.6 (a) (i))1
Nearside Front Service brake effort inadequate at a wheel |1.2.1 |a| |i||1
Nearside Rear Anti-roll bar insecurely attached (5.3.3 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength iner sill (5.3.6 (a) (i))1
Power steering component|s| leaking Steering rack |2.3.3b|1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill/arch (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill/arch (5.3.6 (a) (i))1
Emissions unable to be completed Battery low and vehicle cutting out (8.2.1.2 (d))1
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting from front to rear |6.2.2 |d| |i||1
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting from front to rear |6.2.2 |d| |i||1
Nearside Front Anti-lock braking system wiring excessively damaged (1.6 (d))1
Nearside Front Anti-lock braking system wheel speed sensor excessively damaged retaining bolt snapped (1.6 (c))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis area aroung anti roll bar mounting point. |5.3.6 |a| |i||1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner door sill |6.1.1 |c| |i||1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner door sill |6.1.1 |c| |i||1
Offside Rear Body panel corroded and likely to cause injury wheel arch |6.2.1 |a| |i||1
Offside Front Inner Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii))1
Central Rear Brake pipe leaking on a hydraulic braking system metal pipe (1.1.11 (b) (ii))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail |5.3.6 |a| |i||1
Nearside Rear Stop lamp|s| all not working |4.3.1 |a| |iii||1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill areas (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill areas (7.1.1 (a) (i))1
Offside Headlamp aim projected beam image is obviously incorrect product on lens (4.1.2 (c))1
Nearside Headlamp aim projected beam image is obviously incorrect product on lens (4.1.2 (c))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer and inner closing sill corroded (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer and inner closing sill corroded (7.1.1 (a) (i))1
Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis |5.3.6 |a| |ii||1
Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis |5.3.6 |a| |ii||1
Suspension component mounting prescribed area is excessively corroded Both front chassis at anti roll bar mount |2.4.A.3|1
Seat belt anchorage prescribed area is inadequately repaired Both outer sills at rear |5.2.6|1
Offside Rear Coil spring fractured or broken top (5.3.1 (b) (i))1
Offside Front Anti-roll bar attachment bracket/mounting insecure fixing bolts broken off (5.3.3 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill / wheel arch |7.1.1 |a| |i||1
Nearside Rear Parking |secondary brake| on a single line braking system has no recorded effort at a wheel |1.3.1 |a| |ii||1
Front Exhaust has a part missing |7.1.1a|1
Offside Rear Outer Brake disc significantly and obviously worn (1.1.14 (a) (i))1
Nearside Rear Outer Brake disc significantly and obviously worn (1.1.14 (a) (i))1
Offside Front Lower Steering locking device missing ball joint (2.1.3 (d))1
Exhaust Lambda reading after 2nd fast idle outside specified limits exhaust blow at rear joint |8.2.1.2 |c||1
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i))1
Front Headlamp light source and lamp not compatible both (4.1.4 (c))1
Front Upper Suspension arm ball joint likely to become detached both sides split pins missing (5.3.4 (a) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail where suspension arm is mounted (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail where suspension arm is mounted (5.3.6 (a) (i))1
Exhaust emissions likely to be affected by an exhaust leak Back exhaust Join where the flange has become weak (8.2.1.1 (b))1
Offside Rear Coil spring fractured or broken Upper coil (5.3.1 (b) (i))1
Rear Exhaust system not adequately supported exhaust bracket broken |7.1.1|1
Rear Exhaust system not adequately supported exhaust mounting broken |7.1.1|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top of wheel arch under evap canister (5.3.6 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced rear of inner sill (7.1.1 (a) (i))1
Offside Rear Road wheel badly damaged |4.2.A.1a|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under arch above anti roll bar mounting |6.1.1 |c| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet behind headlight |6.1.1 |c| |i||1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet behind headlight |6.1.1 |c| |i||1
Emissions not tested due to exhaust condition (8.2.1.2 (d))1
Exhaust has a major leak of exhaust gases rear flanges corroded (6.1.2 (a))1
Nearside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wing under arch (5.3.6 (a) (i))1
Offside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wing under arch (5.3.6 (a) (i))1
Offside Front position lamp|s| not working 501 bulb |1.1.A.3b|1
Offside Drag link end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))1
Nearside Rear Sub-frame pin or bush likely to become detached CORRODED (5.3.4 (a) (ii))1
Offside Rear Sub-frame pin or bush likely to become detached CORRODED (5.3.4 (a) (ii))1
Headlamps matched pair are not the same shape (4.1.4 (d))1
Nearside Obligatory mirror missing (3.3 (a))1
Fuel system component leaking area of fuel filter |7.2.3|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch/ chassis leg |5.3.6 |a| |i||1
Nearside Rear Service brake indicates brake bind |3.7.D.2a|1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting marked (6.2.2 (d) (i))1
Brake pipe at imminent risk of failure or fracture front to rear (1.1.11 (a))1
Offside Rear Upper Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|1
Rear Anti-roll bar worn and seriously weakened |2.4.G.1|1
Drivers door cannot be opened from outside the vehicle (6.2.3 (a))1
Offside Parking brake inoperative on one side hand brake cam not moving, brake binding (1.4.1 (a))1
Nearside Front Upper Steering locking device missing ball joint (2.1.3 (d))1
Offside Front Steering locking device missing track rod end (2.1.3 (d))1
Offside Front Upper Steering locking device missing ball joint (2.1.3 (d))1
Offside Rear Lower Rear fog lamp not working (4.5.1 (a) (ii))1
Offside Front Upper Suspension arm insecurely attached ball joint securing device missing (5.3.3 (a) (i))1
Offside Front Anti-roll bar attachment bracket/mounting likely to become detached anti-roll bar link rod missing nut (5.3.3 (a) (ii))1
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill corroded (6.1.1 (c) (i))1
Rear Service brake grabbing severely (1.2.1 (c))1
Exhaust diesel particulate filter shows evidence of tampering. catalytic convertor not fitted (8.2.2.1 (c))1
Nearside Front Upper Suspension arm insecurely attached ball joint securing device missing (5.3.3 (a) (i))1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill corroded (6.1.1 (c) (i))1
Parking brake lever ratchet mechanism worn to the extent that the brake may inadvertently release (1.1.6 (b) (ii))1
Steering box leaking to the extent that oil is dripping leaking from power stering pipe (2.1.1 (e) (ii))1
Emissions not tested due to exhaust blowing (8.2.2.2 (e))1
Offside Front Obligatory mirror does not provide a view to the rear (3.3 (c))1
Rear Service brake lagging in operation (1.2.1 (d))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength backing sill (5.3.6 (a) (i))1
Nearside Front Steering locking device missing ball joint split pin missing (2.1.3 (d))1
Nearside Front Steering locking device missing track rod end split pin missing (2.1.3 (d))1
Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))1
Offside Rear Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))1
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength under floor sill (5.3.6 (a) (i))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill at rear (5.3.6 (a) (i))1
Offside Front Shock absorbers has an excessively worn bush (5.3.2 (c))1
Rear fog lamp adversely affected by the operation of another lamp on permanently with headlights (4.5.4 (b))1
Rear Position lamp not working nearside and offside (4.2.1 (a) (ii))1
Nearside Rear Bumper insecure (6.1.4 (a) (i))1
Offside Front Brake pipe leaking on a hydraulic braking system brake pipe (1.1.11 (b) (ii))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Beneath battery tray (5.3.6 (a) (i))1
Offside Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch at front (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch at front (7.1.1 (a) (i))1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg / floor pan (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill panels (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill panels (5.3.6 (a) (i))1
Offside Front Body panel corroded and likely to cause injury wing (6.2.1 (a) (i))1
Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill /floor area (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill/floor area (7.1.1 (a) (i))1
Front Headlamp not working on main beam (4.1.1 (a) (ii))1
Offside Seat belt webbing significantly weakened (7.1.2 (b) (ii))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill rear (7.1.1 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill corroded (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill corroded (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis / floor corroded (5.3.6 (a) (i))1
Nearside Front Upper Steering locking device missing split pin missing (2.1.3 (d))1
Nearside Front Upper Suspension arm pin or bush excessively worn Yellow marker (5.3.4 (a) (i))1
Battery insecure and likely to cause a short circuit positive terminal loose (4.13 (a) (ii))1
Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced sill |6.1.1 |a| |i||1
Nearside Front Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill badly holed with corrosion (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Hole in floor within 30 cm of subframe mounting point (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Hole in floor within 30 cm of subframe mounting point (5.3.6 (a) (i))1
Emissions not tested started over heating during test radiator has leak (8.2.1.2 (d))1
Offside Front Upper Anti-roll bar linkage pin or bush likely to become detached (5.3.4 (a) (ii))1
Exhaust has a major leak of exhaust gases centre box (6.1.2 (a))1
Nearside Rear Outer Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Rear Outer Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))1
Nearside Front Outer Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))1
Offside Front Outer Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))1
Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills (7.1.1 (a) (i))1
Offside Rear Body panel corroded and likely to cause injury quarter panel (6.2.1 (a) (i))1
Front Headlamp aim not tested (4.1.2 (b))1
Offside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill rotted through (6.1.1 (c) (i))1
Rear Stop lamp|s| not working high level brake light not working |4.3.1 |a| |ii||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch and inner and outer sill corroded and holed (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch chassis rail (5.3.6 (a) (i))1
Offside Front Position lamp not working Side Light Bulb (4.2.1 (a) (ii))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Seal (6.1.1 (c) (i))1
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill as marked (5.3.6 (a) (i))1
Power steering ram|s| leaking from a failed seal |2.3.3b|1
Offside Front Power steering component leaking |2.1.5 |a||1
Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii||1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear outer sill (7.1.1 (a) (i))1
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded SILL |5.2.6|1
Nearside Front Bumper insecure (6.1.4 (a) (i))1
Nearside Front Electrical wiring insecure and in contact with sharp edges abs wire (4.11 (a) (ii))1
Offside Front Lower Steering locking device ineffective balljoint (2.1.3 (d))1
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced both inner sills at rear under vehicle (6.1.1 (c) (i))1
Offside Front Upper Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis at roll bar mount (6.1.1 (c) (i))1
Nearside Front Lower Steering linkage ball joint has excessive play (2.1.3 (b) (i))1
Emissions not tested due to noisy exhaust (8.2.1.2 (d))1
Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii))1
Nearside Rear Outer Integral body structure is fractured and structural rigidity is significantly reduced sill area (6.1.1 (a) (i))1
Offside Rear Outer Integral body structure is fractured and structural rigidity is significantly reduced sill area (6.1.1 (a) (i))1
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL |7.1.1 |a| |i||1
Rear Anti-roll bar insecure and impairing directional stability (5.3.3 (a) (ii))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Behind wheel arch (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front chassis rail (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front chassis rail (5.3.6 (a) (i))1
Offside Front Position lamp has a product on the lens or light source which significantly reduces light intensity (4.2.3 (b) (ii))1
Nearside Rear Exhaust has a major leak of exhaust gases @ silencer joint to pipe (6.1.2 (a))1
Emissions unable to be completed due to exhaust leaking/blowing (8.2.1.2 (d))1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill also inadequate repair (7.1.1 (a) (i))1
Rear Exhaust has a major leak of exhaust gases BACK BOX ON THE JOIN (6.1.2 (a))1
Emissions unable to be completed rear exhaust leak (8.2.1.2 (d))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under n/s/f inner wing corroded by anti roll bar mount |5.3.6 |a| |i||1
Exhaust has a major leak of exhaust gases centre section |7.1.2|1
Rear Bumper insecure |6.1.4 |a| |i||1
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced no projected pattern or kick up (4.1.4 (b))1
Offside Front Headlamp has a product on the lens so that the light output is severely reduced no headlamp pattern projected (4.1.4 (b))1
Offside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting offside front chassis leg corroded leading to a hole (6.2.2 (d) (i))1
Nearside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outside sill corroded leading to a hole (6.2.2 (d) (i))1
Offside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outside sill corroded leading to a hole (6.2.2 (d) (i))1
Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction sticker on window (3.1 (a) (ii))1
Front Service brake excessively fluctuating both sides (1.2.1 (e))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch holed (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected on anti roll bar mounting (5.3.6 (a) (ii))1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected on anti roll bar mounting (5.3.6 (a) (ii))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced lower seatbelt fitting (7.1.1 (a) (i))1
Offside Rear Brake linkage has restricted free movement |3.5.1k|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg / under wheel arch front (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch / front (5.3.6 (a) (i))1
Offside Headlamp lens missing (4.1.1 (b) (ii))1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting offside outer sill |6.2.2 |d| |i||1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting nearside outer sill |6.2.2 |d| |i||1
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill panel |7.1.1 |a| |i||1
Offside Outer Seat belt anchorage prescribed area is inadequately repaired sill panel. |7.1.1 |a| |i||1
Nearside Front Suspension arm insecurely attached wishbone rear bush (5.3.3 (a) (i))1
Offside Front Suspension arm insecurely attached wishbone rear bush (5.3.3 (a) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg at anti roll mount (6.1.1 (c) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))1
Rear Exhaust has a major leak of exhaust gases before rear silencer (6.1.2 (a))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassie leg forward of suspension (6.2.2 (d) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced OUTER SILL |7.1.1 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front chassis leg |5.3.6 |a| |i||1
Service brake excessively binding nearside and offside front |1.2.1 |f||1
Suspension component mounting prescribed area is excessively corroded o/s outer sill |2.4.A.3|1
Rear Exhaust has a major leak of exhaust gases Joint. |6.1.2 |a||1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength seal (5.3.6 (a) (i))1
Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))1
Offside Windscreen wiper not operating automatically when switched on |8.2.1b|1
Nearside Windscreen wiper not operating automatically when switched on |8.2.1b|1
Nearside Windscreen wiper missing |3.4 |a||1
Offside Windscreen wiper missing |3.4 |a||1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch within 30cm of anti roll bar (5.3.6 (a) (i))1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer Sill |6.1.B.2|1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer Sill |6.1.B.2|1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced side sill (7.1.1 (a) (i))1
Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt both sides (5.3.4 (b) (ii))1
Front Upper Suspension component ball joint dust cover no longer prevents the ingress of dirt both sides (5.3.4 (b) (ii))1
Nearside Front Outer Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))1
Headlamp light source and lamp not compatible both sides, LED bulbs in h4 H/L |4.1.4 |c||1
Central Exhaust has a major leak of exhaust gases joint between CAT and central section (6.1.2 (a))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg, next to upper arm front bush (5.3.6 (a) (i))1
Offside Rear Inner Integral body structure is deformed and structural rigidity is significantly reduced (6.1.1 (a) (i))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting closing panel/battery support |6.2.2 |d| |i||1
Nearside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected chassis leg (5.3.6 (a) (ii))1
Offside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected chassis leg (5.3.6 (a) (ii))1
Nearside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected inner arch (5.3.6 (a) (ii))1
Offside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected inner arch (5.3.6 (a) (ii))1
Nearside Seat belt anchorage prescribed area is inadequately repaired floor repaired with body filler (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer flooring (5.3.6 (a) (i))1
Rear Anti-roll bar missing (5.3.3 (a) (ii))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner quarter sill (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner quarter sill (7.1.1 (a) (i))1
Front Headlamp has a product on the lens so that the light output is severely reduced BOTH . (4.1.4 (b))1
Emissions not tested due to mil light on dash (8.2.1.2 (d))1
Offside Body has a sharp edge caused by damage Door mirror |6.1.C.1|1
Exhaust has a major leak of exhaust gases Centre pipe to rear box joint (6.1.2 (a))1
Nearside Rear Inner Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced silll (6.1.1 (b) (ii))1
Offside Rear Inner Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced sill (6.1.1 (b) (ii))1
Nearside Front Position lamp not working Side out (4.2.1 (a) (ii))1
Suspension component mounting prescribed area is excessively corroded both outer sill |2.4.A.3|1
Suspension component mounting prescribed area is excessively corroded o/s/f chassis |2.4.A.3|1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded in excess |7.1.1 |a| |i||1
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering Outer sill holed (6.1.1 (c) (ii))1
Nearside Service brake excessively binding (1.2.1 (f))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill section excessively corroded (7.1.1 (a) (i))1
Offside Front Seat belt webbing significantly weakened (7.1.2 (b) (ii))1
Rear Service brake excessively fluctuating Both rears (1.2.1 (e))1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/rear inner arch (5.3.6 (a) (i))1
Brake performance unable to be tested due to rear brakes being metal to metal (1.2.1 (g))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced OUTER SILL |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage likely to become detached in the event of a collision OUTER SILL |7.1.1 |a| |ii||1
Front Brake valve leaking abs valve block FL pipe union seeping, nut tightened (1.1.7 (d) (i))1
Nearside Front Lower Anti-roll bar linkage fractured |5.3.3 |b| |ii||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill corroded (7.1.1 (a) (i))1
Offside Rear Exhaust Lambda reading after 2nd fast idle outside specified limits lambda reading too high (8.2.1.2 (c))1
Offside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill - holed (6.2.2 (d) (i))1
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill. repair patches must be seam welded |5.2.6|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings boot floor/below battery rotten through |6.1.B.2|1
Offside Front Inner Brake disc significantly and obviously worn inner face rusty (1.1.14 (a) (i))1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced FLOOR AREA (6.1.1 (c) (i))1
Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced Near side rear sill corroded |6.1.1 |b| |ii||1
Nearside Rear Upper Suspension arm has excessive play in a pin/bush |2.4.G.2|1
Nearside Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Front Brake disc significantly and obviously worn excess corrosion. (1.1.14 (a) (i))1
Offside Front Brake disc significantly and obviously worn excess corrosion. (1.1.14 (a) (i))1
Nearside Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii))1
Brake performance unable to be tested leak from nearside brake pipe (1.2.1 (g))1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings excessive corrosion to offside sill |6.1.B.2|1
Brake valve leaking Nearside rear caliper |1.1.7 |d| |i||1
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill panel (7.1.1 (a) (i))1
Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength D bush mounting both sides (5.3.6 (a) (i))1
Offside Rear Lower Suspension arm likely to become detached (5.3.3 (a) (ii))1
Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected CHASSIE (5.3.6 (a) (ii))1
Engine MIL inoperative or indicates a malfunction DATE OF FIRST USE SEP 29TH 2003 (8.2.1.2 (h))1
Nearside Front Lower Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))1
Offside Front Lower Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))1
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired SILL (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area is inadequately repaired SILL (7.1.1 (a) (i))1
Offside Front Subframe mounting prescribed area is inadequately repaired CHASSIE (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg holed (underneath) (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area is inadequately repaired welded repair not finished on edge (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OSF inner arch/sill end area holed (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/sill end area holed (5.3.6 (a) (i))1
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill middle marked with chalk (6.1.1 (c) (i))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner chassis behind strut marked with chalk (6.1.1 (c) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner chassis behind strut marked with chalk (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mount. |5.3.6 |a| |i||1
Nearside Front Anti-roll bar linkage insecurely attached broken. |5.3.3 |a| |i||1
Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))1
Nearside Rear Anti-roll bar linkage fractured ball joint broken |2.4.G.1|1
Brake performance unable to be tested burst pipe (1.2.1 (g))1
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i))1
Offside Rear Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii||1
Service brake excessively binding n/s/f & n/s/r (1.2.1 (f))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Main box section |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Main box section |5.3.6 |a| |i||1
Nearside Drivers view of the road through the swept area of the windscreen materially affected by an obstruction Sticker (3.1 (a) (ii))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Undersill (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Undersill (7.1.1 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced rear inner and outer sill area (7.1.1 (a) (i))1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s/r (5.3.6 (a) (i))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill has a hole (5.3.6 (a) (i))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill very badly corroded with a hole (5.3.6 (a) (i))1
Nearside Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a|1
Nearside Rear Brake pipe leaking on a hydraulic braking system Excessively corroded (1.1.11 (b) (ii))1
Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Offside rear mounting area (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Front inner wheel arch (7.1.1 (a) (i))1
Fuel hose leaking |7.2.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill area |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill area |2.4.A.3|1
Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rails /subrame mount/anti roll bar mounts both sides (5.3.6 (a) (i))1
Rear Anti-roll bar has excessive play in a ball joint |2.4.G.2|1
Offside Front Subframe mounting prescribed area is excessively corroded chassis area |2.4.A.3|1
Offside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength battery tray (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill excessively corroded (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill excessively corroded (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail near anti roll bar mounting (5.3.6 (a) (i))1
Rear Exhaust has a major leak of exhaust gases temporary repair (6.1.2 (a))1
Exhaust has a major leak of exhaust gases rear silencer and intermediate pipe blowing (6.1.2 (a))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (under wheel arch) (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (under wheel arch) (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill / floor area (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill / floor area (5.3.6 (a) (i))1
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))1
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s and n/s rear outer sills (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by roll bar mount (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by roll bar mount (5.3.6 (a) (i))1
Power steering pipe|s| or hose|s| leaking rack to pump |2.3.3b|1
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Outer cill (7.1.1 (a) (i))1
Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Outer cill (7.1.1 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner wheel arch [sub frame]. (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer (7.1.1 (a) (i))1
Nearside Front Outer Anti-lock braking system component missing |3.4.2|1
Offside Front Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Front Anti-roll bar attachment bracket/mounting likely to become detached top ball joint nut on its last threads (5.3.3 (a) (ii))1
Front Windscreen wiper not working both (3.4 (a))1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area |7.1.1 |a| |i||1
Offside Vehicle structure has damage which adversely affects braking or steering |6.1.A.1|1
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3|1
Front Position lamp not working Both lamps (4.2.1 (a) (ii))1
Offside Rear Seat belt anchorage prescribed area is inadequately repaired Corrosion to sill panel and floor. evidence of body filler used to repair panels. (7.1.1 (a) (i))1
Emissions unable to be completed no cat not idling (8.2.1.2 (d))1
Nearside Anti-roll bar linkage worn and seriously weakened |2.4.G.1|1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis |6.1.1 |c| |ii||1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis |6.1.1 |c| |ii||1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point |6.1.1 |c| |i||1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i||1
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i||1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced boot floor |6.1.1 |c| |i||1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced boot floor |6.1.1 |c| |i||1
Offside Headlamp lens missing |4.1.1 |b| |ii||1
Nearside Front Body panel corroded and likely to cause injury wing holed (6.2.1 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch to sill (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outersill |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner-sill |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis leg/inner wing (5.3.6 (a) (i))1
Power steering pipe|s| or hose|s| excessively corroded All 3 pipes to steering rack pinion neck. |2.3.2|1
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired sill |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area is inadequately repaired sill |7.1.1 |a| |i||1
Nearside Front Brake hose damaged and likely to fail |1.1.12 |a||1
Nearside Lower Seat belt anchorage prescribed area is excessively corroded outer sill / bodywork |5.2.6|1
Offside Front Position lamp not working new bulb fitted (4.2.1 (a) (ii))1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg at anti roll bar mounting |2.4.A.3|1
Offside Front Outer Suspension arm ball joint excessively worn lower arm |5.3.4 |a| |i||1
Nearside Rear Rear position lamp|s| incomplete |1.1.4a|1
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded door sill |5.2.6|1
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded door sill |5.2.6|1
Offside Front Shock absorber insecure |2.7.2b|1
Offside Front Upper Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet (6.1.1 (c) (i))1
Nearside Rear Exhaust system insecure o/s/r (6.1.2 (a))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill/wing area |7.1.1 |a| |i||1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis in wheel arch |2.4.A.3|1
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill panel (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis behind wheel. (5.3.6 (a) (i))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch (6.2.2 (d) (i))1
Nearside Front Position lamp likely to become detached (4.2.1 (c) (ii))1
Offside Front Hazard warning lamps inoperative (4.4.1 (e))1
Nearside Rear Service brake excessively binding binding has also caused pad to wear low (1.2.1 (f))1
Nearside Front Brake disc significantly and obviously worn brake face has worn away on inner and outer face (1.1.14 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i))1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering under front wing (6.1.1 (c) (ii))1
Offside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3|1
Service brake excessively binding both |1.2.1 |f||1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Front chassis leg corroded and also acts as anti-roll bar mounting. |6.1.1 |c| |ii||1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Front chassis leg corroded and also acts as anti-roll bar mounting point. |6.1.1 |c| |ii||1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor corroded through. |6.1.1 |c| |i||1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor corroded through. |6.1.1 |c| |i||1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner, out sills and wheel arch (6.1.1 (c) (i))1
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body sill (5.3.6 (a) (i))1
Offside Rear Vehicle structure is deformed and structural rigidity is significantly reduced lower outer sill (6.1.1 (a) (i))1
Offside Front Outer Track rod end ball joint has excessive play |2.2.B.1f|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floorpan (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail by anti roll bar mounting (5.3.6 (a) (i))1
Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired floor pan |6.2.2 |d| |ii||1
Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired |6.2.2 |d| |ii||1
Nearside Rear Integral body structure has a fractured which is likely to adversely affect braking or steering inner wing |6.1.1 |a| |ii||1
Nearside Rear Inner Integral body structure has excessive corrosion which adversely affects braking or steering wing |6.1.1 |c| |ii||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced under body sill |7.1.1 |a| |i||1
Nearside Front Hydraulic fluid leaking excessively Brake caliper (8.4.1 (a) (i))1
Stop lamp(s) all not working intermittent operation (4.3.1 (a) (iii))1
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i))1
Obligatory mirror missing (3.3 (a))1
Central Front Coil spring fractured or broken (5.3.1 (b) (i))1
Offside Front Inner Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))1
Offside Headlamp aim beam image obviously incorrect dim |1.8.A.1b|1
Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill rear end |5.2.6|1
Offside Outer Seat belt anchorage prescribed area is excessively corroded sill rear end |5.2.6|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill - Wheel arch (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel Arch (5.3.6 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel Arch (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear inner wheel arches (5.3.6 (a) (i))1
Seat belt anchorage prescribed area strength or continuity significantly reduced both rear inner wheel arches (7.1.1 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s/r and n/s/r inner and outer sills, o/s/f and n/s/f chassis sections (5.3.6 (a) (i))1
Parking brake lever defective so that it cannot be satisfactorily operated excessive travel (1.1.6 (d))1
Parking brake inoperative on one side both sides (1.4.1 (a))1
Nearside Track rod end ball joint dust cover missing |2.2.C.1c|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill and sill end (7.1.1 (a) (i))1
Steering column attachment defective to the extent that there is a serious risk of detachment (2.2.2 (d) (ii))1
Offside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected inner sill (5.3.6 (a) (ii))1
Offside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected inner sill (5.3.6 (a) (ii))1
Rear Coil spring modified so the suspension is inoperative (5.3.1 (d) (ii))1
Nearside Rear Anti-lock braking system wheel speed sensor missing (1.6 (c))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis area |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis area |5.3.6 |a| |i||1
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i||1
Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength O/S FRONT CHASSIS SECTION, ANTI- ROLL BAR AREA CORRODED AND HOLED (5.3.6 (a) (i))1
Offside Front Anti-roll bar linkage has excessive play in a pin/bush TOP NUT INSECURE |2.4.G.2|1
Offside Rear Headlamp insecure |1.7.3|1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill near jacking point (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing/arch near suspension component (6.1.1 (c) (i))1
Rear Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced side sill (6.1.1 (c) (i))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i))1
Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings both inner sills |6.1.B.2|1
Offside Front Vehicle structure has damage which adversely affects braking or steering inner wing |6.1.A.1|1
Exhaust has a major leak of exhaust gases middle at joint to rear corroded (6.1.2 (a))1
Offside Front Anti-roll bar linkage ball joint likely to become detached broke (5.3.4 (a) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting |5.3.6 |a| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassic rail (6.1.1 (c) (i))1
Nearside Lower Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e|1
Seat belt anchorage prescribed area is excessively corroded o/s and n/s sill`s |5.2.6|1
Rear Position lamp not working both (4.2.1 (a) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch /inner wing (5.3.6 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing/chassis leg |2.4.A.3|1
Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing/chassis leg |2.4.A.3|1
Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill areas (6.2.2 (d) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under arch area (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under arch area (6.1.1 (c) (i))1
Offside Rear Anti-roll bar linkage damaged and seriously weakened out of position (5.3.3 (b) (i))1
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill at end |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis adjacent anti roll bar mounting piont |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis adjacent top arm mounting point |2.4.A.3|1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength end sill |5.3.6 |a| |i||1
Offside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.A.1|1
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill/wheel arch |6.1.A.1|1
Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||1
Offside Headlamp aim not tested light inoperative |4.1.2 |b||1
Seat belt anchorage prescribed area strength or continuity significantly reduced corrosion within 30cm of seat belt mounting point on offside rear sill |7.1.1 |a| |i||1
Exhaust has a major leak of exhaust gases centre to rear exhaust join has major leak of gases |6.1.2 |a||1
Seat belt anchorage prescribed area strength or continuity significantly reduced both sills (7.1.1 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill support and inner arch areas (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill support and inner arch areas (7.1.1 (a) (i))1
Nearside Front Lower Macpherson strut pin or bush excessively worn bush (5.3.4 (a) (i))1
Offside Front Lower Macpherson strut pin or bush excessively worn bush (5.3.4 (a) (i))1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and corner (5.3.6 (a) (i))1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and corner (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded floor to sill |2.4.A.3|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2|1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg underside anti roll bar area (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis area |5.3.6 |a| |ii||1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis area |5.3.6 |a| |ii||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sidesill area |7.1.1 |a| |i||1
Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Rear of sill corroded though (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis engine bay |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis engine bay |2.4.A.3|1
Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded outer door sill |5.2.6|1
Front Subframe mounting prescribed area is excessively corroded n/s and o/s |2.4.A.3|1
Offside Front Suspension arm ball joint excessively worn lift excessive. |5.3.4 |a| |i||1
Emissions unable to be completed Vehicle was failing but was was too hot to complete test (8.2.1.2 (d))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill , within 30 cm of nearside lower seat belt mount. (7.1.1 (a) (i))1
Nearside Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor pan x2 |6.2.2 |d| |i||1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill x2 |6.2.2 |d| |i||1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch/boot floor pan |6.2.2 |d| |i||1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis |6.2.2 |d| |i||1
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced N/S/R Sill Corroded Through (6.1.1 (c) (i))1
Exhaust Lambda reading after 2nd fast idle outside specified limits Lambda Emissions Reading Too High (8.2.1.2 (c))1
Parking brake inoperative on one side N/S/R Handbrake Inoperative (1.4.1 (a))1
Brake performance not tested N/S/F Wheel Binding Heavily (1.2.1 (g))1
Brake performance not tested O/S/F Wheel Obviously Grabbing |1.2.1 |g||1
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced O/S/R Sill Corroded Through |6.1.1 |c| |i||1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings N/S/R Outer Sill Corroded Through |6.1.B.2|1
Exhaust has a major leak of exhaust gases mid-rear (6.1.2 (a))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Boot floor (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill requires welding (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near anti roll bar mounting |5.3.6 |a| |i||1
Front Service brake excessively binding O/s & N/s (1.2.1 (f))1
Nearside Front Subframe mounting prescribed area is excessively corroded inner and outer and bottom |2.4.A.3|1
Offside Front Subframe mounting prescribed area is excessively corroded inner and outer and bottom |2.4.A.3|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch chassis (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis. (5.3.6 (a) (i))1
Front Service brake imbalanced across an axle Biased to nearside (1.2.1 (b) (i))1
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|1
Exhaust has a major leak of exhaust gases center/rear joint (6.1.2 (a))1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis around front anti roll bar mounting |2.4.A.3|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill return (7.1.1 (a) (i))1
Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Front Position lamp not working 501 (4.2.1 (a) (ii))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer Sill (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill area (5.3.6 (a) (i))1
Nearside Rear Brake lever has restricted free movement caliper hand brake lever not working (1.1.15 (e))1
Front Windscreen wiper not working |3.4 |a||1
Fuel system component leaking INJECTOR (6.1.3 (b) (i))1
Nearside Front Anti-roll bar attachment bracket/mounting insecure bolt sheared |5.3.3 |a| |i||1
Offside Rear Position lamp showing white light to the rear Light lens broken. (4.2.3 (a) (ii))1
Offside Rear Suspension component mounting prescribed area is excessively corroded anti-roll bar mounting |2.4.A.3|1
Emissions not tested excessive blow from centre/rear exhaust (8.2.1.2 (d))1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/floor pan (6.1.1 (c) (i))1
Offside Rear Seat belt anchorage prescribed area is excessively corroded outter sill |5.2.6|1
Offside Front Subframe mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3|1
Exhaust has a major leak of exhaust gases rear box exhaust flange |7.1.2|1
Stop lamp|s| not working |4.3.1 |a| |ii||1
Offside Headlamp lens seriously defective deteriorated/ no beam pattern (4.1.1 (b) (ii))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill area/ wheel arch (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded main chassis box sections holed |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded main chassis box sections holed |2.4.A.3|1
Offside Front Braking system leaking brake caliper |3.6.A.1|1
Offside Rear Service brake grabbing severely (1.2.1 (c))1
Offside Front Service brake grabbing severely (1.2.1 (c))1
Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch/ chassis |2.4.A.3|1
Offside Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a|1
Seat belt anchorage prescribed area strength or continuity significantly reduced OFFSIDE SILL AT REAR (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill corroded holed |5.2.6|1
Exhaust has a major leak of exhaust gases rear exhaust joint |6.1.2 |a||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill. (7.1.1 (a) (i))1
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL |5.3.6 |a| |i||1
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL |5.3.6 |a| |i||1
Offside Rear Subframe mounting prescribed area is excessively corroded Outer sill |2.4.A.3|1
Parking brake inoperative on one side nearside (1.4.1 (a))1
Nearside Front Suspension component mounting prescribed area is fractured chassis |2.4.A.3|1
Nearside Rear Body has a sharp edge caused by corrosion sill panel |6.1.C.1|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced OUTER SILL (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced INNER WHEEL ARCH (7.1.1 (a) (i))1
Rear Exhaust silencer insecure REAR BOX SECURING BOLT BROKEN (8.1.1 (b) (i))1
Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid CALIPER LEAKING (1.1.16 (b) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength FLOOR CORRODED (5.3.6 (a) (i))1
Exhaust has a major leak of exhaust gases joint centre to rear (6.1.2 (a))1
Offside Front Subframe mounting prescribed area is excessively corroded and attachment area for anti roll bar |2.4.A.3|1
Nearside Front Subframe mounting prescribed area is excessively corroded And attachment area for anti roll bar mount |2.4.A.3|1
Offside Rear coil spring broken in several places |2.4.C.1a|1
Nearside Rear Upper Suspension arm damaged and seriously weakened |2.4.G.1|1
Offside Rear Upper Suspension arm damaged and seriously weakened front bush eye |2.4.G.1|1
Front Headlamp light intensity severely reduced needs polish lens clouding over (4.1.4 (a))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill area (5.3.6 (a) (i))1
Offside Rear Front position lamp|s| incorrect colour |1.1.A.3e|1
Nearside Rear Brake hose leaking on a hydraulic braking system Caliper area (1.1.12 (c) (ii))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near subframe mounting |6.2.2 |d| |i||1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i))1
Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))1
Offside Rear Lower Anti-roll bar linkage insecure and impairing directional stability linkage detatched from ball joint |5.3.3 |a| |ii||1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis leg |6.1.1 |c| |ii||1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis leg |6.1.1 |c| |ii||1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill |6.1.1 |c| |i||1
Rear Exhaust has a major leak of exhaust gases centre rear exhaust joint area ...non std exhaust |7.1.2|1
Emissions not tested ref exhaust blowing badly |7.4.B.1|1
Offside Rear coil spring broken upper coil broken |2.4.C.1a|1
Rear Exhaust has a major leak of exhaust gases Exhaust box (6.1.2 (a))1
Nearside Front Service brake excessively binding Brake binding (1.2.1 (f))1
Emissions unable to be completed Due to exhaust blowing (8.2.1.2 (d))1
Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering chassis heavily corroded and holed within 30cm of steering and suspension mountings (6.1.1 (c) (ii))1
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced both front inner chassis (6.1.1 (c) (i))1
Nearside Headlamp aim beam image too far to the left |1.6.B4|1
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired door sill |5.2.6|1
Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner p inner panel sill (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner panel sill (7.1.1 (a) (i))1
Exhaust emissions likely to be affected by an exhaust leak Centre & Back box (8.2.2.1 (b))1
Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Front Lower Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Nearside rear brake recording little or no effort park |3.7.B.5a|1
Offside rear brake recording little or no effort park |3.7.B.5a|1
Rear Exhaust has a major leak of exhaust gases centre and rear section flange joint corroded, leaking and unservicable (6.1.2 (a))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer sill/wheelarch (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer sill/wheelarch (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded |7.1.1 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill area (5.3.6 (a) (i))1
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti-roll bar mounting (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both outer sills x2 |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 30 cm (5.3.6 (a) (i))1
Central Exhaust has a major leak of exhaust gases centre box (6.1.2 (a))1
Nearside Outer Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3|1
Offside Outer Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3|1
Anti-roll bar linkage ball joint excessively worn offside front |5.3.4 |a| |i||1
Seat belt anchorage prescribed area strength or continuity significantly reduced both lower |7.1.1 |a| |i||1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front top |5.3.6 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded and hold |7.1.1 |a| |i||1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chassis leg corroded and holded |7.1.1 |a| |i||1
Rear Exhaust has a major leak of exhaust gases centre section to backbox join |7.1.2|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis section in front of upper suspension arm |5.3.6 |a| |i||1
Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sills both sides (7.1.1 (a) (i))1
Brake performance not tested Due to brake fluid leak |1.2.1 |g||1
Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid Caliper |1.1.16 |b| |i||1
Offside Seat belt installation anchorage insecure |5.3.1d|1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill & wheel arch (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill & wheel arch (7.1.1 (a) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sills and wheel arch (6.1.1 (c) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sills and wheel arch (6.1.1 (c) (i))1
Nearside Front Anti-roll bar linkage has excessive play in a ball joint drop link |2.4.G.2|1
Offside Rear Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))1
Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))1
Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch/Outer sill (5.3.6 (a) (i))1
Offside Headlamp incorrect colour main beam (4.1.4 (a))1
Nearside Headlamp incorrect colour main beam (4.1.4 (a))1
Rear Exhaust has a major leak of exhaust gases will require middle and back |7.1.2|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel Arch. |5.3.6 |a| |i||1
Nearside Front Outer Sub-frame attachment bracket/mounting insecure and impairing directional stability bolt (5.3.3 (a) (ii))1
Offside Front Outer Sub-frame attachment bracket/mounting insecure and impairing directional stability bolt (5.3.3 (a) (ii))1
Offside Front Hydraulic brake calliper leaking and braking performance affected (1.1.16 (b) (ii))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced upper suspension arm (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced upper suspension arm (6.1.1 (c) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill 30cm of seatbelt anchor and seat moint (6.1.1 (c) (i))1
Brake performance unable to be tested brake fluid leak from all brake calipers (1.2.1 (g))1
Emissions unable to be completed failed to complete test, engine idle rpm too high (8.2.1.2 (d))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill/floorpan. (7.1.1 (a) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill |6.1.1 |c| |i||1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill in 2 places |6.1.1 |c| |i||1
Suspension component mounting prescribed area is excessively corroded both front chassis rails |2.4.A.3|1
Offside Rear Brake disc significantly and obviously worn inner brake face (1.1.14 (a) (i))1
Offside Front Seat belt anchorage prescribed area is excessively corroded o/s/r sill |5.2.6|1
Front Exhaust has a major leak of exhaust gases at joint |7.1.2|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Engine Bay |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor |5.3.6 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Floor to sill |7.1.1 |a| |i||1
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg (5.3.6 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch + chassis |5.3.6 |a| |i||1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch |5.3.6 |a| |i||1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i||1
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i||1
Offside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected out rigger (5.3.6 (a) (ii))1
Brake hose excessively stretched both front brake hoses (1.1.12 (b) (ii))1
Offside Front Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength seatbelt mounting area (5.3.6 (a) (i))1
Nearside Front Lower Suspension locking device missing (5.3.6 (b))1
Offside Front Lower Suspension locking device missing (5.3.6 (b))1
Nearside Front Upper Suspension locking device missing (5.3.6 (b))1
Offside Front Upper Suspension locking device missing (5.3.6 (b))1
Brake lining|s| wear indicator illuminated |1.1.13 |a| |i||1
Nearside Front Lower Suspension arm locating pin retaining device missing |2.4.G.3b|1
Offside Front Lower Suspension arm locating pin locking device missing |2.4.G.3b|1
Offside Rear Stop lamp not working (1.2.1b)1
Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))1
Front All position lamps adversely affected by the operation of another lamp (4.2.3 (c))1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced OUTER SILL (6.1.1 (c) (i))1
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear of sill in front of wheel arch (6.1.1 (c) (i))1
Exhaust emissions likely to be affected by an induction leak Air filter (8.2.1.1 (b))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill. marked. (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill. marked. (5.3.6 (a) (i))1
Rear Exhaust system insecure rubber mount split (6.1.2 (a))1
Emissions unable to be completed bench error message "replace o2 sensor" (8.2.1.2 (d))1
Offside Front Anti-roll bar linkage attachment bracket/mounting fractured bracket missing bottom of drop link (5.3.3 (b) (ii))1
Nearside Rear Outer Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill holed (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill holed (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill holed (5.3.6 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced centre floor to sill holed (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre floor to sill holed (7.1.1 (a) (i))1
Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill to arch (6.2.2 (d) (i))1
Brake operation has insufficient reserve pressure/vacuum to provide assistance for at least two more brake applications after the warning device has operated (or gauge shows an unsafe reading) (1.1.3 (a) (ii))1
Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt both side n/s and o/s (5.3.4 (b) (ii))1
Rear Anti-roll bar linkage pin or bush excessively worn both sides (5.3.4 (a) (i))1
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill 30cm within seatbelt (6.1.1 (c) (i))1
Nearside Front position lamp|s| does not face the front |1.1.A.3a|1
Offside Front position lamp|s| does not face the front |1.1.A.3a|1
Nearside Front Shock absorber has negligible damping effect |2.7.5|1
Rear Service brake excessively fluctuating Both Rear (1.2.1 (e))1
Rear Brake disc significantly and obviously worn Both Rear (1.1.14 (a) (i))1
Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))1
Exhaust has a major leak of exhaust gases Exhaust backbox blowing (6.1.2 (a))1
Offside Front Body panel likely to become detached wing is loose (6.2.1 (a) (ii))1
Nearside Front Position lamp missing (4.2.1 (a) (ii))1
Emissions unable to be completed very bad leak from system (8.2.1.2 (d))1
Nearside Windscreen damaged and affecting the drivers view of the road (3.2 (a) (ii))1
Rear fog lamp insecure |1.3.2a|1
Nearside Rear Anti-roll bar linkage which is adjustable, locking device insecure |2.4.G.1|1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outter sill (6.1.1 (c) (i))1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill under drivers door. (6.1.1 (c) (i))1
Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Both Sills (6.2.2 (d) (i))1
Offside Front Seat belt damaged sufficient to obstruct correct operation of the belt (5.2.2a)1
Offside Rear Lower Suspension arm likely to become detached bolts/nuts loose both (5.3.3 (a) (ii))1
Power steering disconnected where it is standard fitment |2.3.3a|1
Exhaust emissions carbon monoxide content excessive |7.3.B.1a|1
Exhaust emissions hydrocarbon content excessive |7.3.B.1b|1
Front All direction indicators incorrect colour (4.4.3 (a))1
Direction indicator not working all n/s indicators inop (4.4.1 (a) (ii))1
Offside Front Subframe mounting prescribed area is excessively corroded Front mounting area corroded between Subframe and anti roll bar mounting |2.4.A.3|1
Nearside Front Subframe mounting prescribed area is excessively corroded Front mounting area corroded between Subframe and anti roll bar mounting |2.4.A.3|1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength on floor, on bulkhead (5.3.6 (a) (i))1
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill area (6.1.1 (c) (i))1
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill area (6.1.1 (c) (i))1
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch area (6.1.1 (c) (i))1
Emissions unable to be completed Due to engine temperature (8.2.1.2 (d))1
Nearside Horn not working (7.7 (a))1
Offside Horn not working (7.7 (a))1
Offside Rear fog lamp not working (1.3.2b)1
Nearside Upper Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)1
Parking brake: efficiency below requirements (3.7.C.1b)1
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)1
Nearside Rear brake disc excessively pitted (3.5.1h)1
Headlamp not in good working order adversely affecting beam image (1.2.4a)1
Exhaust has a major leak of exhaust gases rear pipe join (6.1.2 (a))1
Exhaust has a major leak of exhaust gases rear clamp |7.1.2|1
Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch as marked by antiroll bar mounting |2.4.A.3|1
Offside Rear Inner Suspension spring mounting prescribed area is inadequately repaired sill has filler where should be welded (5.3.6 (a) (i))1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))1
Nearside Front Macpherson strut pin or bush excessively worn (5.3.4 (a) (i))1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor /inner sill (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor/inner sill (7.1.1 (a) (i))1
Nearside Front Brake valve leaking bleed nipple on claliper (1.1.7 (d) (i))1
Nearside Front Front passenger door cannot be opened from inside the vehicle (6.2.3 (a))1
Steering wheel likely to become detached (2.2.1 (b) (ii))1
Nearside Headlamp light intensity severely reduced Dip & main beams (4.1.4 (a))1
Offside Front Direction indicator not working In headlight (4.4.1 (a) (ii))1
Nearside Headlamp aim projected beam image is obviously incorrect Aftermarket led headlight unit fitted (4.1.2 (c))1
Offside Headlamp aim projected beam image is obviously incorrect Aftermarket led headlight unit fitted (4.1.2 (c))1
Rear Rear fog lamp missing |1.3.2a|1
Front Rear fog lamp tell tale not working |1.3.1b|1
Rear fog lamp switch not able to be operated from the normal driving position (4.5.3 (a))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Rear of inner sill (7.1.1 (a) (i))1
Nearside Rear Position lamp adversely affected by the operation of another lamp flashing with indicator (4.2.3 (c))1
Nearside Headlamp lens seriously defective no beam pattern (4.1.1 (b) (ii))1
Offside Headlamp lens seriously defective no beam pattern (4.1.1 (b) (ii))1
Offside Stop lamp(s) light intensity significantly reduced bulb fitted incorrectly (4.3.3 (a) (ii))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Nearside inner sill rusted through within 30cm of lower seat belt mounting. |7.1.1 |a| |i||1
Steering wheel spokes loose (2.2.1 (c) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg above front sub frame mounting and anti-roll bar mounting is excessively corroded. (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg above front sub frame mounting and anti-roll bar mounting is excessively corroded. (6.1.1 (c) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill is corroded through. (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill is corroded through. (6.1.1 (c) (i))1
Front Power steering component leaking STEERING RACK (2.1.5 (a))1
Nearside Front Power steering component insecure (2.1.5 (d) (i))1
Offside Front Power steering component insecure STEERING BOOTS CLIPS MISING (2.1.5 (d) (i))1
Windscreen in such a condition that visibility through swept area is seriously affected SUN STRIP AFFECTING SWEPT AREA OF WIPERS (3.2 (c) (ii))1
Rear Suspension component insecure and impairing directional stability mounting bolts loose (5.3.3 (a) (ii))1
Coil spring fractured or broken both rear (5.3.1 (b) (i))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill corroded (7.1.1 (a) (i))1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Holed as marked (6.2.2 (d) (i))1
Offside Rear position lamp|s| insecure |1.1.A.3a|1
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt suspension arm ball joints bushes worn and split (5.3.4 (b) (ii))1
Nearside Front Anti-roll bar linkage insecurely attached anti roll bar pin / retaining bolt nut insecure (5.3.3 (a) (i))1
Side repeater incorrect colour (4.4.3 (a))1
Obligatory indirect vision device insecure cabin mirror (3.3 (b) (ii))1
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits 0.24, limit 0.2 (8.2.1.2 (a))1
Offside Rear Suspension arm insecurely attached (5.3.3 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength NSF CHASIS RAIL CORRODED THROUGH |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OSF CHASSIS RAIL CORRODED THROUGH. |5.3.6 |a| |i||1
Rear Lower Suspension arm corroded and seriously weakened both sides |2.4.G.1|1
Power steering pipe|s| or hose|s| leaking area of steering rack |2.3.3b|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength marked in yellow chalk |5.3.6 |a| |i||1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced marked in yellow chalk |7.1.1 |a| |i||1
Offside Rear Road wheel badly distorted |5.2.2 |c| |i||1
Nearside Front Subframe mounting prescribed area is excessively corroded sill |2.4.A.3|1
Nearside Front Lower Subframe mounting prescribed area is excessively corroded chassis leg |2.4.A.3|1
Offside Front Upper Subframe mounting prescribed area is excessively corroded chassis leg |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired Outer sill. (7.1.1 (a) (i))1
Offside Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4|1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill corroded within 30cm of seatbelt mount (5.3.6 (a) (i))1
Nearside Stop lamp not working (1.2.1b)1
Offside Stop lamp not working (1.2.1b)1
Centre Stop lamp not working (1.2.1b)1
Horn not working (1.6.2a)1
Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)1
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)1
Offside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)1
Offside Rear coil spring broken (2.4.C.1a)1
Nearside Front front brake binding (3.7.B.1)1
Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)1
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill to inner sill has equate repair, panel not welded?? (6.1.1 (c) (i))1
Nearside Headlamp light source and lamp not compatible no image (4.1.4 (c))1
Offside Headlamp light source and lamp not compatible No image (4.1.4 (c))1
Offside Headlamp not working on dipped beam (1.7.5a)1
Offside Headlamp not working on main beam (1.7.5a)1
Nearside Headlamp aim aimed so that it dazzles other road users MAIN BEAM STUCK ON (1.8.A.1a)1
Dipswitch operation does not deflect all main beam headlamps to make them dipped beams (1.7.4b)1
Nearside Indicator tell tale inoperative (1.4.A.2a)1
Rear fog lamp missing (1.3.2a)1
Rear fog lamp not working (1.3.2b)1
Rear fog lamp tell tale missing (1.3.1b)1
Nearside Front Body insecure and dangerous to other road users wing (6.1.B.1b)1
Offside Front Body insecure and dangerous to other road users (6.1.B.1b)1
Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)1
Nearside Front Coil spring mounting loose (2.4.C.3a)1
Nearside Front Lower Steering locking device missing Ball joint (2.2.C.1g)1
Nearside Front wheel bearing has excessive play (2.5.A.3c)1
Nearside Front Anti-roll bar linkage fractured Broken (5.3.3 (b) (ii))1
Front Track rod end seriously misaligned Both wheels point outward excessively (2.1.3 (e))1
Offside Front Upper Anti-roll bar linkage insecure and impairing directional stability |5.3.3 |a| |ii||1
Exhaust has a major leak of exhaust gases tail pipe at joint (6.1.2 (a))1
Rear Exhaust has a major leak of exhaust gases join (6.1.2 (a))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter (5.3.6 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))1
Offside Rear brake caliper securing device loose |3.5.1j|1
Service brake excessively fluctuating All brakes fluctuating excessively giving feedback through the pedal (1.2.1 (e))1
Nearside An item not tested |Manual|1
Offside An item not tested |Manual|1
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner & outer sills (6.2.2 (d) (i))1
Nearside Rear Exhaust mounting missing |7.1.1b|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill/inner sill |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner / outer sill |7.1.1 |a| |i||1
Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering inner sill (6.1.1 (c) (ii))1
Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering outer sill (6.1.1 (c) (ii))1
Offside Front Inner Floor excessively deteriorated (6.2.4 (a) (i))1
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))1
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))1
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))1
Exhaust has a major leak of exhaust gases manifold (6.1.2 (a))1
Nearside Front Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii))1
Offside Rear Direction indicator incorrect colour (4.4.3 (a))1
Emissions unable to be completed CO too high (8.2.1.2 (d))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced rear of nearside sill corroded (7.1.1 (a) (i))1
Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis corroded (5.3.3 (b) (i))1
Exhaust emissions likely to be affected by an exhaust leak rear box join (8.2.1.1 (b))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))1
Offside Front Hydraulic brake calliper damaged excessive movement causing brake to bind (1.1.16 (a) (i))1
Offside Headlamp aim projected beam image is obviously incorrect Bulb incorrectly fitted (4.1.2 (c))1
Nearside Rear Upper Shock absorber insecure Top bolt |2.7.2b|1
Offside Rear Shock absorber insecure Lower bolt |2.7.2b|1
Offside Obligatory mirror missing (3.3 (a))1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor. (6.2.2 (d) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill and adjacent areas excessively corroded and holed. (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill and adjacent areas excessively corroded and holed. (7.1.1 (a) (i))1
Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s and o/s outriggers (5.3.6 (a) (i))1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2|1
Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Anti-roll bar insecure both front and rear |2.4.G.1|1
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1|1
Front Brake disc contaminated (1.1.14 (b))1
Direction indicators flashing less than 60 times a minute |1.4.A.2g|1
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))1
Emissions not tested due to exhaust blow (8.2.1.2 (d))1
Headlamp aim not tested vehicle has been raised to allow access (4.1.2 (b))1
Road wheel more than one fixing missing one in every wheel (5.2.1 (a) (ii))1
Nearside Front Body panel insecure wing corroded (6.2.1 (a) (i))1
Offside Front Body panel insecure wing corroded (6.2.1 (a) (i))1
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL AS MARKED (6.1.1 (c) (i))1
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL AS MARKED (6.1.1 (c) (i))1
Offside Front Anti-roll bar ball joint excessively worn drop link (5.3.4 (a) (i))1
Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt ball joint (5.3.4 (b) (ii))1
Offside Floor excessively deteriorated under drivers seat (6.2.4 (a) (i))1
Rear Rear fog lamp tell-tale not working (4.9.1 (a) (ii))1
Exhaust emissions likely to be affected by an exhaust leak CENTRE JOINT NOT BOLTED TOGETHER (8.2.1.1 (b))1
Emissions unable to be completed engine temp got hot (8.2.1.2 (d))1
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits 2.42 (8.2.1.2 (a))1
Exhaust Lambda reading after 2nd fast idle outside specified limits 0.983 (8.2.1.2 (c))1
Rear Shock absorbers has negligible damping effect (5.3.2 (d))1
Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Hydraulic fluid leaking excessively power steering fluid leak (8.4.1 (a) (i))1
Offside Front Seat belt retracting mechanism defective (7.1.2 (e))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Next to lower seat belt mount. Seam between inner sill and outer has a hole. (7.1.1 (a) (i))1
Exhaust Lambda reading after 2nd fast idle outside specified limits TOO HIGH (8.2.1.2 (c))1
Exhaust has a major leak of exhaust gases EXHAUST LEAKS AT CAT (6.1.2 (a))1
Emissions not tested vehicle over heating (8.2.1.2 (d))1
Brake performance unable to be tested car wont run to test brakes very bad missfire cuts out (1.2.1 (g))1
Emissions unable to be completed engine very bad missfire and cuts out (8.2.1.2 (d))1
Nearside Rear Stop lamp(s) emits other than a steady red light (4.3.3 (a) (ii))1
Nearside Front Passengers seat insecure bolts loose and rear inner bolt missing (6.2.6 (a) (ii))1
Offside Front Drivers seat insecure bolts loose and front inner bolt has been sheared (6.2.5 (a) (ii))1
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits co to high (8.2.1.2 (a))1
Offside Rear Stop lamp(s) all not working (4.3.1 (a) (iii))1
Front Power steering ram leaking (2.1.5 (a))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor pan to inner sill (6.1.1 (c) (i))1
Rear Service brake lagging in operation |1.2.1 |d||1
Offside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii))1
Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch big hole (6.2.2 (d) (i))1
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer and inner sill (6.2.2 (d) (i))1
Offside Front Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))1
Central Electrical wiring likely to drag on the ground (4.11 (a) (iii))1
Nearside Front Lower Body component corroded and likely to cause injury wing (6.2.1 (a) (i))1
Nearside Stop lamp(s) emits other than a steady red light (4.3.3 (a) (ii))1
Offside Stop lamp(s) emits other than a steady red light (4.3.3 (a) (ii))1
Windscreen damaged and affecting the drivers view of the road wiper arcs zone A&B (3.2 (a) (ii))1
Offside Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))1
Rear Rear reflector missing (4.8.2 (a) (ii))1
Brake pedal anti-slip provision loose (1.1.2 (c))1
Front Service brake excessively binding 2x (1.2.1 (f))1
Front Side repeater incorrect colour both (4.4.3 (a))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor section (6.1.1 (c) (i))1
Rear Upper Suspension arm corroded and seriously weakened both sides (5.3.3 (b) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner & outer sill (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill & end cap (5.3.6 (a) (i))1
Offside Rear Outer Suspension component corroded and seriously weakened sill (5.3.3 (b) (i))1
Nearside Front Upper Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Front Upper Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Front Lower Shock absorber insecure |2.7.2b|1
Nearside Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Offside Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Seat belt anchorage prescribed area is excessively corroded o/s and n/s rear sills corroded |5.2.6|1
Steering rack has excessive free play detected at the steering wheel (steering rack fitted) (2.3 (a) (i))1
Brake performance unable to be tested Pipe leaking (1.2.1 (g))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill /jack point area holed and corroded (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill /jack point area holed and corroded (7.1.1 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill dameged (5.3.6 (a) (i))1
Rear Electrical wiring insecure and connectors likely to become disconnected earth strap (4.11 (a) (ii))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside rear inner sill and nearside rear outer sill (5.3.6 (a) (i))1
Exhaust emissions carbon monoxide content excessive 6.4% (8.2.1.2 (b))1
Service brake is causing the vehicle to swerve to the offside (1.2.1 (b) (i))1
Offside Rear brake disc insecure |3.5.1i|1
Exhaust catalytic converter missing where one was fitted as standard due to date of first use on system (8.2.1.1 (a))1
Rear Exhaust has a major leak of exhaust gases Silencer (6.1.2 (a))1
Emissions unable to be completed Exhaust leaks. (8.2.1.2 (d))1
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Stop lamp(s) not working New bulb fitted. (4.3.1 (a) (ii))1
Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering inner wheel arch (6.1.1 (c) (ii))1
Fluid leaking continuously posing a serious risk to road safety from power steering area undertray fitted cant see where leak is from |8.4.1 |a| |ii||1
Exhaust emissions likely to be affected by an exhaust leak rear silencer joint with center section rusted away |8.2.1.1 |b||1
Nearside Front Brake disc significantly and obviously worn excessively scored by brack pad backing plate |1.1.14 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS LEG RUSTED AND HOLED |5.3.6 |a| |i||1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner Sill (6.2.2 (d) (i))1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer Sill (6.2.2 (d) (i))1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer Sill (6.2.2 (d) (i))1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner Sill (6.2.2 (d) (i))1
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner Sill (6.2.2 (d) (i))1
Fuel system component leaking excessively or a risk of fire fuel filter |6.1.3 |b| |ii||1
Offside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill full of filler |5.2.6|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chasses by anti-roll bar |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chasses by anti-roll bar |2.4.A.3|1
Offside Front Front position lamp|s| not working 501 |1.1.A.3b|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under body inner sill |7.1.1 |a| |i||1
Nearside Front Upper Suspension arm locating pin retaining device missing |2.4.G.3b|1
Nearside Front Floor excessively deteriorated corroded (6.2.4 (a) (i))1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill central section (6.1.1 (c) (i))1
Front Headlamp aim projected beam image is obviously incorrect both /no image and focus (4.1.2 (c))1
Fuel system component leaking near filter |7.2.3|1
Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wings. (6.1.1 (c) (i))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear of subframe (5.3.6 (a) (i))1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear of subframe (5.3.6 (a) (i))1
Nearside Rear Floor excessively deteriorated excessively corroded (6.2.4 (a) (i))1
Offside Rear Floor excessively deteriorated excessively corroded (6.2.4 (a) (i))1
Brake performance not tested Brake pipe leaking (1.2.1 (g))1
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid o/s/r brake caliper leaking fluid |3.6.A.1|1
Exhaust has a major leak of exhaust gases rear silencer blowing at joint (6.1.2 (a))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail above anti roll bar mounting (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail above anti roll bar mounting (5.3.6 (a) (i))1
Offside Floor excessively deteriorated |6.2.4 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail inside wheel arch (5.3.6 (a) (i))1
Exhaust Lambda reading after 2nd fast idle outside specified limits small ex blow (8.2.1.2 (c))1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor holed (6.2.2 (d) (i))1
Rear Exhaust system insecure back box detached (6.1.2 (a))1
Hydraulic fluid leaking excessively (8.4.1 (a) (i))1
Offside Rear Lower Exhaust emissions carbon monoxide content excessive carbon monoxide out of specified limit (8.2.1.2 (b))1
Offside Rear Lower Suspension arm corroded and seriously weakened at shocker mount |5.3.3 |b| |i||1
Central Front Lower Power steering pipe/hose leaking |2.1.5 |a||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer (5.3.6 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill badly corroded (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill badly corroded (7.1.1 (a) (i))1
Offside Rear Hydraulic brake calliper insecurely mounted and braking performance affected (1.1.16 (c) (ii))1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill excessively corroded, covered in filler (7.1.1 (a) (i))1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill excessively corroded , covered in filler (7.1.1 (a) (i))1
Central Front Parking brake lever is not capable of being maintained in operation by direct mechanical action only Lever release button sticking in. (1.1.6 (f))1
Nearside Rear Floor excessively deteriorated Boot floor excessively corroded and holed (6.2.4 (a) (i))1
Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting under wheel rch (5.3.6 (a) (i))1
Front Coil spring fractured or broken Both sides (5.3.1 (b) (i))1
Nearside Front Anti-roll bar linkage has an unsafe modification |5.3.3 |c| |i||1
Rear Road wheel distorted |4.2.A.1a|1
Offside Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired seat belt mounting point (6.2.2 (d) (ii))1
Nearside Rear Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired wheel arch area (6.2.2 (d) (ii))1
Nearside Seat belt anchorage prescribed area is excessively corroded rear of outer sill |5.2.6|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner floor sill (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner floor sill (5.3.6 (a) (i))1
Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))1
Nearside Front Upper Anti-roll bar has excessive play in a ball joint |2.4.G.2|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at front suspension mountings at front subframe (5.3.6 (a) (i))1
Offside Front Vehicle structure inadequately repaired such that structural rigidity is significantly reduced strut area (6.1.1 (d) (i))1
Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))1
Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))1
Nearside Rear wheel cylinder leaking |3.6.A.1|1
Exhaust Lambda reading after 2nd fast idle outside specified limits Catalytic Converter Glowing Red Underneath After 20 Minutes Of Idling Possibly Blocked. (8.2.1.2 (c))1
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||1
Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened Front chassis in engine bay |5.3.3 |b| |i||1
Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened Chassis under wheel arch |5.3.3 |b| |i||1
Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened Chassis under wheel arch |5.3.3 |b| |i||1
Nearside Front Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b|1
Offside Front Inner Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3|1
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill has hole |5.2.6|1
Offside Rear Body component damaged and likely to cause injury Light unit (6.2.1 (a) (i))1
Offside Body component damaged and likely to cause injury Side reflector (6.2.1 (a) (i))1
Front brake disc has restricted free movement |3.5.1j|1
Rear brake disc has restricted free movement |3.5.1j|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill corroded |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail above antiroll bar mount (5.3.6 (a) (i))1
Nearside Front coil spring broken and offside front |2.4.C.1a|1
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))1
Brake performance unable to be tested pads metal to metal front and rear (1.2.1 (g))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear inner sill (7.1.1 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill end (7.1.1 (a) (i))1
Nearside Rear Shock absorbers has an excessively worn bush (5.3.2 (c))1
Offside Rear Shock absorbers has an excessively worn bush (5.3.2 (c))1
Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength Both Sides (5.3.6 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Sill (7.1.1 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer Sill/Arch (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor To Sill (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Wing To Sill (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis Leg/Inner Wing (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg/Inner Wing (5.3.6 (a) (i))1
Anti-roll bar insecure and impairing directional stability (5.3.3 (a) (ii))1
Anti-roll bar likely to become detached (5.3.3 (a) (ii))1
Emissions not tested Due To Exhaust Leak (8.2.1.2 (d))1
Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill |6.1.A.1|1
Offside Outer Vehicle structure is fractured and structural rigidity is significantly reduced sill |6.1.1 |a| |i||1
Nearside Rear Anti-roll bar severely distorted fouling spring |2.4.G.1|1
Offside Rear Anti-roll bar severely distorted fouling subframe |2.4.G.1|1
Nearside Front Vehicle structure has damage which adversely affects braking or steering chassis |6.1.A.1|1
Offside Rear Anti-roll bar linkage insecure and impairing directional stability incorrectly fitted |5.3.3 |a| |ii||1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill next to jacking point |6.1.1 |c| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill next to jacking point |6.1.1 |c| |i||1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill next to jacking point |6.1.1 |c| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis heavily corroded and is dangerous. offside front inner wheel arch is also corroded |6.1.1 |c| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Excessive corrosion (7.1.1 (a) (i))1
Nearside Rear Anti-roll bar linkage corroded and seriously weakened |5.3.3 |b| |i||1
Offside Rear Anti-roll bar linkage corroded and seriously weakened |5.3.3 |b| |i||1
Rear Anti-roll bar corroded and seriously weakened |5.3.3 |b| |i||1
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded Sill area. |5.2.6|1
Front Service brake grabbing severely |1.2.1 |c||1
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill end (marked) (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill end (marked) (5.3.6 (a) (i))1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg hole in |6.1.B.2|1
Offside Rear Brake disc contaminated |1.1.14 |b||1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill |5.3.6 |a| |i||1
Nearside Direction indicators not working |1.4.A.2c|1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill |6.1.A.1|1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill. (6.1.1 (c) (i))1
Nearside Rear Brake valve leaking (1.1.7 (a) (i))1
Nearside Front Steering locking device ineffective (2.1.3 (d))1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above anti roll bar mount |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above anti roll bar mounting |5.3.6 |a| |i||1
Nearside Seat belt anchorage prescribed area is excessively corroded body sill panel adjacent |5.2.6|1
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid brake caliper leaking |3.6.A.1|1
Brake performance not tested RBT Test Not Performed Due To Brake Fluid Leak |1.2.1 |g||1
Brake hose connection leaking on an air braking system N/S/F Caliper Leaking Fluid |1.1.12 |c| |i||1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting O/S/F Chassis Underside Corroded Through |6.2.2 |d| |i||1
Exhaust Lambda reading after 2nd fast idle outside specified limits Emission Limits Not Met |8.2.1.2 |c||1
Nearside Seat belt anchorage prescribed area is excessively corroded sill area rear |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded sill area rear |5.2.6|1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill. Lower arm area (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill. Lower arm area (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Floor,marked with yellow chalk |5.2.6|1
Nearside Front Electrical wiring insecure Abs lead |1.9.2a|1
Offside Front Electrical wiring insecure Abs lead |1.9.2a|1
Nearside Rear Lower Body has a sharp edge caused by corrosion Wing |6.1.C.1|1
Offside Rear Lower Body has a sharp edge caused by corrosion Wing |6.1.C.1|1
Nearside Front Body component damaged and likely to cause injury Mirror cover (6.2.1 (a) (i))1
Nearside Rear Brake pipe leaking on a hydraulic braking system to flexy pipe (1.1.11 (b) (ii))1
Nearside Rear Anti-roll bar linkage pin or bush excessively worn d bush (5.3.4 (a) (i))1
Offside Rear Anti-roll bar linkage pin or bush excessively worn d bush (5.3.4 (a) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded Nearside rear inner sill corroded |5.2.6|1
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded Offside rear outer sill corroded |5.2.6|1
Offside Front Suspension component mounting prescribed area is excessively corroded offside front chassis leg corroded |2.4.A.3|1
Anti-roll bar insecure and impairing directional stability |5.3.3 |a| |ii||1
Seat belt buckle not functioning as intended both (7.1.2 (d))1
Exhaust emissions likely to be affected by an exhaust leak |8.2.2.1 |b||1
Nearside Parking brake efficiency below requirements |1.4.2 |a| |i||1
Offside Parking brake efficiency below requirements |1.4.2 |a| |i||1
Rear Exhaust silencer likely to become detached |8.1.1 |b| |ii||1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner wing (5.3.6 (a) (ii))1
Nearside Front Track rod end ball pin shank loose |2.2.B.1c|1
Front Outer Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1|1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer and inner sill (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer and inner sill (5.3.6 (a) (i))1
Rear Exhaust has a major leak of exhaust gases flange |6.1.2 |a||1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch (6.2.2 (d) (i))1
Nearside Front Outer Body has excessive displacement which may lead to loss of vehicle control chassis leg |6.1.B.1a|1
Offside Front Inner Brake back plate|s| locking device insecure |3.5.1l|1
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i))1
Offside Front Upper Anti-roll bar linkage fractured (5.3.3 (b) (ii))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting lower sill (6.2.2 (d) (i))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch / sill (6.2.2 (d) (i))1
Rear Exhaust has a major leak of exhaust gases centre & rear box |6.1.2 |a||1
Nearside Front Suspension component mounting prescribed area is excessively corroded |roll bar| |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded |roll bar| |2.4.A.3|1
Nearside Rear Anti-roll bar modified so the suspension is likely to fail other components anti roll bar fouling against coil spring (5.3.3 (c) (ii))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer chassis leg (6.2.2 (d) (i))1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting upper chassis leg and inner arch (6.2.2 (d) (i))1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting upper chassis leg and inner arch (6.2.2 (d) (i))1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))1
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill to underbody (6.2.2 (d) (i))1
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill to underbody (6.2.2 (d) (i))1
Nearside Front Upper Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Between upper suspension arm and anti roll bar (5.3.6 (a) (ii))1
Offside Front Upper Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Between upper suspension arm and anti roll bar (5.3.6 (a) (ii))1
Offside Rear Brake disc contaminated (1.1.14 (b))1
Offside Front Brake prescribed area is excessively corroded Inner sill/floor pan (1.1.21 (e) (i))1
Suspension component mounting prescribed area is excessively corroded both rear floor panels |2.4.A.3|1
Centre Rear Brake pipe leaking |3.6.A.1|1
Engine MIL inoperative or indicates a malfunction eml light on (8.2.1.2 (h))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced backing sill floor pan area (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail and inner wing area anti roll bar mounting area (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area is inadequately repaired anti roll bar mounting bolts missing weld tacked in place (5.3.6 (a) (i))1
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits 0.58 co (8.2.1.2 (a))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced backing sill floor pan arear (7.1.1 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area is inadequately repaired wing chassis rail area anti roll bar mounting area (5.3.6 (a) (i))1
Front Anti-roll bar mounting modified so the suspension is likely to fail other components both (5.3.3 (c) (ii))1
Rear Suspension arm attachment bracket/mounting insecure both sides (5.3.3 (a) (i))1
Exhaust has a major leak of exhaust gases Middle and rear |7.1.2|1
Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired lower sill |5.3.6 |a| |i||1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced lower sill |7.1.1 |a| |i||1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced lower sill |7.1.1 |a| |i||1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower sill |5.3.6 |a| |i||1
Nearside Rear Body has a sharp edge caused by corrosion BUMPER |6.1.C.1|1
Offside Front Front position lamp|s| not working SIDE LIGHT |1.1.A.3b|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded OUTER SEAL |5.2.6|1
Nearside Front Suspension component mounting prescribed area is excessively corroded Wheel Arch |2.4.A.3|1
Offside Front Outer Anti-roll bar linkage fractured (5.3.3 (b) (ii))1
Offside Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings jacking point |6.1.B.2|1
Nearside Rear Body component corroded and likely to cause injury (6.2.1 (a) (i))1
Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut (5.3.6 (a) (i))1
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg and underneath (5.3.6 (a) (i))1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength archlower (5.3.6 (a) (i))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i))1
Nearside Front Seat belt anchorage loose not attached at bottom mounting point (7.1.1 (b))1
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))1
Floor excessively deteriorated boot floor (6.2.4 (a) (i))1
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing/chassis |2.4.A.3|1
Front Front wheel bearing has excessive play |2.5.A.3c|1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front chassis from underside and from inner wing side (5.3.6 (a) (i))1
Seat belt anchorage prescribed area strength or continuity significantly reduced both rear under lower sills (7.1.1 (a) (i))1
Seat belt anchorage prescribed area strength or continuity significantly reduced both rear inner wings (7.1.1 (a) (i))1
Offside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor (6.2.2 (d) (i))1
Rear Suspension component mounting prescribed area is excessively corroded both sides sill |2.4.A.3|1
Nearside Parking brake lever has excessive movement indicating incorrect adjustment poor performance (1.1.6 (c))1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to floor (6.1.1 (c) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill / arch / floor area |6.2.2 |d| |i||1
Front brake disc contaminated by brake fluid |3.5.1h|1
Rear brake disc contaminated by brake fluid |3.5.1h|1
Boot lid cannot be secured in the closed position wont open |6.2.1 |e||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis member holding subframe (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis member holding subframe (5.3.6 (a) (i))1
Nearside Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings strut top mount |6.1.B.2|1
Rear Exhaust has a major leak of exhaust gases centre to rear joint flange corroded (6.1.2 (a))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis forward on subframe (5.3.6 (a) (i))1
Offside Rear Body component corroded and likely to cause injury (quarter panel) (6.2.1 (a) (i))1
Nearside Rear Body component corroded and likely to cause injury (quarter panel) (6.2.1 (a) (i))1
Central Exhaust has a major leak of exhaust gases and rear (6.1.2 (a))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near shock absorber (6.1.1 (c) (i))1
Offside Front Service brake application uneven across the axle |3.7.D.2b|1
Nearside Front Braking system leaking brake flexy to caliper |3.6.A.1|1
Electrical wiring insecure front abs wires |1.9.2a|1
Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength sill area |5.3.6 |a| |i||1
Offside Outer Suspension component mounting prescribed area fractured significantly reducing structural strength sill area |5.3.6 |a| |i||1
Offside Front Body has a sharp edge caused by corrosion wing insecure |6.1.C.1|1
Offside Rear brake disc inappropriately repaired |3.5.1n|1
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded rear part of sill |2.4.A.3|1
Exhaust system not adequately supported temporry rubber fitted/support incomplete |7.1.1|1
Nearside Front Brake pipe likely to become detached or damaged brake hose fouling on wheel, left hand lock (1.1.11 (d) (ii))1
Driver`s door cannot be opened from outside the vehicle |6.2.B.1b|1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front inner arches (5.3.6 (a) (i))1
Nearside Seat belt anchorage prescribed area is excessively corroded N/S outer sill at rear |5.2.6|1
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i))1
Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i))1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/floor (6.1.1 (c) (i))1
Offside Front Road wheel distorted |4.2.A.1a|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chasis |6.1.B.2|1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill. (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mount (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting point (5.3.6 (a) (i))1
Front Headlamp has a product on the lens which changes emitted colour to other than white or yellow (4.1.4 (b))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced support panel [floor pan]marked yellow (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer floor rail corroded and holed (5.3.6 (a) (i))1
Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings side sill |6.1.B.2|1
Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings side sill |6.1.B.2|1
Nearside Front Headlamp incorrect colour (4.1.4 (a))1
Offside Front Headlamp incorrect colour (4.1.4 (a))1
Offside Outer Seat belt anchorage prescribed area is excessively corroded sill corroded |5.2.6|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/front chassis section(around anti roll bar mounting) (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/front chassis section(around anti roll bar mounting) (5.3.6 (a) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis/ inner wing marked yellow |6.1.1 |c| |i||1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded |7.1.1 |a| |i||1
Nearside Front Upper Anti-roll bar linkage ball joint likely to become detached BROKEN (5.3.4 (a) (ii))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill section |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill section |5.2.6|1
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BOTH SIDE SILLS |6.1.B.2|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings BOTH SIDE SILLS |6.1.B.2|1
Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill holed |6.1.A.1|1
Nearside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill holed |6.1.A.1|1
Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor And Sill (5.3.6 (a) (i))1
Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor And Sill (5.3.6 (a) (i))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength N/S/F chassis leg is excessively corroded, subframe mounting area (5.3.6 (a) (i))1
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced O/S/F inner sill (6.1.1 (c) (i))1
Front Sub-frame severely distorted |2.4.G.1|1
Nearside Rear Anti-roll bar linkage missing |5.3.3 |a| |ii||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength few areas on inner chassis leg (5.3.6 (a) (i))1
Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill. (7.1.1 (a) (i))1
Emissions not tested high risk of overheating. |8.2.1.2 |d||1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to floor |6.1.B.2|1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))1
Nearside Front Subframe mounting prescribed area is excessively corroded floor to sill |2.4.A.3|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OUTER SILL |6.1.B.2|1
Offside Rear Wheel insecure |4.2.A.1c|1
Central Exhaust has a major leak of exhaust gases pipe |7.1.2|1
Offside Rear Upper Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch |7.1.1 |a| |i||1
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i||1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced to rear inner floor |7.1.1 |a| |i||1
Offside Front Lower Electrical wiring inadequately supported engine compartment |1.9.2a|1
Offside Front Suspension component mounting prescribed area is severely distorted chassis rail, inner / lower |2.4.A.3|1
Nearside Front Lower Suspension component mounting prescribed area is excessively corroded chassis rail |2.4.A.3|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg area antiroll bar mounting point (5.3.6 (a) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced ( Inner Sill ) (6.1.1 (c) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength backing sill (5.3.6 (a) (i))1
Rear Exhaust has a major leak of exhaust gases tail box flange area |7.1.2|1
Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6|1
Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6|1
Nearside Front Headlamp aim projected beam image is obviously incorrect no pattern (4.1.2 (c))1
Offside Front Headlamp aim projected beam image is obviously incorrect no pattern (4.1.2 (c))1
Rear wheel bearing has excessive play |2.6.2|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in front of inner wing (5.3.6 (a) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis in front of inner wing behind wing shield (6.1.1 (c) (i))1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassic leg (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassic leg (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch , chassis (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch chassis (5.3.6 (a) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in area of suspension (6.1.1 (c) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced closing (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced closing (7.1.1 (a) (i))1
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||1
Emissions not tested pas leak (8.2.1.2 (d))1
Nearside Rear Braking system leaking brake pipe |3.6.A.1|1
Anti-roll bar corroded and seriously weakened NEARSIDE AND OFFSIDE front corrosion anti rollbars to chassis |5.3.3 |b| |i||1
Power steering pipe/hose corroded such that the steering is adversely affected ALL PIPES to steering rack corroded (2.1.5 (g) (ii))1
Exhaust emissions likely to be affected by an exhaust leak Rear box clamp insufficient (8.2.2.1 (b))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting jacking point and cill (6.2.2 (d) (i))1
Nearside Rear Anti-roll bar attachment bracket/mounting likely to fail fitted incorrectly hitting coil spring and subframe (5.3.3 (b) (ii))1
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting O/S sill (6.2.2 (d) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis leg (6.2.2 (d) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded chasis leg |2.4.A.3|1
Rear Rear fog lamp not working |4.5.1 |a| |ii||1
Nearside Suspension component mounting prescribed area is excessively corroded Outer sill |2.4.A.3|1
Exhaust emissions likely to be affected by an exhaust leak CAT has been removed (8.2.1.1 (b))1
Seat belt anchorage prescribed area strength or continuity significantly reduced BOTH REAR SILLS (7.1.1 (a) (i))1
Nearside Front Shock absorbers has an excessively worn bush BOTTOM BUSH (5.3.2 (c))1
Nearside Rear Braking system leaking brake pipe to flexy |3.6.A.1|1
Exhaust has a major leak of exhaust gases Centre/Rear section joint corroded and blowing |7.1.2|1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chassis |7.1.1 |a| |i||1
Offside Front Inner Seat belt anchorage prescribed area is inadequately repaired sill |7.1.1 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower inner corner panel under battery (5.3.6 (a) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/jacking point/floor (6.1.1 (c) (i))1
Exhaust system insecure |6.1.2 |a||1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outter sill |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outter sill |6.1.B.2|1
Exhaust emissions hydrocarbon content after 2nd fast idle excessive low flow |7.3.D.3|1
Offside Rear Body has a sharp edge caused by damage wheelarch |6.1.C.1|1
Exhaust has a major leak of exhaust gases centre to back box (6.1.2 (a))1
Offside Front Tie bar/rod has excessive play in a ball joint drop link |2.4.G.2|1
Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings holed and corroded |6.1.B.2|1
Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both front |2.4.G.2|1
Nearside Rear Integral body structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced (6.1.1 (b) (ii))1
Offside Rear Integral body structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced (6.1.1 (b) (ii))1
Offside Front front brake binding binding |3.7.B.1|1
Offside Front brake caliper has restricted free movement sezed |3.5.1k|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill holed and corroded |7.1.1 |a| |i||1
Offside Front Suspension component mounting prescribed area is excessively corroded Chassi rail near anti roll bar mounting |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))1
Offside Rear Brake pipe leaking to nearside rear flexi |3.6.A.1|1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced 30cm from outer sill (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner/outter sill |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner/outter sill |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner/outter sill |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner/outter sill |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Innner floor |5.3.6 |a| |ii||1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner floor |5.3.6 |a| |ii||1
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Outter sill |5.3.6 |a| |ii||1
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Outter sill |5.3.6 |a| |ii||1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i))1
Exhaust has a major leak of exhaust gases center to rear (6.1.2 (a))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis leg by arb mounting (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis by arb mounting (5.3.6 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill excessively corroded (7.1.1 (a) (i))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill to floor and sill backs (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside front outrigger (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both front floors outer to wings (5.3.6 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i))1
Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))1
Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))1
Nearside Front Seat belt anchorage prescribed area is inadequately repaired Rear outer sill (7.1.1 (a) (i))1
Nearside Front Anti-roll bar linkage insecure broken |2.4.G.1|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail above roll bar mount. |2.4.A.3|1
Front Headlamp has a product on the lens so that the light output is severely reduced |4.1.4 |b||1
Nearside Rear Subframe mounting prescribed area is inadequately repaired (5.3.6 (a) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced ANTIROLL BAR MOUNTING AREA (6.1.1 (c) (i))1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis rail holed |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail holed |2.4.A.3|1
Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill section (6.1.1 (c) (i))1
Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill section (6.1.1 (c) (i))1
Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering sill (6.1.1 (c) (ii))1
Offside Vehicle structure has excessive corrosion which adversely affects braking or steering sill (6.1.1 (c) (ii))1
Offside Front Subframe mounting prescribed area is excessively corroded Inner wheel arch and engine bay |2.4.A.3|1
Nearside Front Subframe mounting prescribed area is severely distorted Inner wheel arch and engine bay |2.4.A.3|1
Offside Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2|1
Nearside Inner Seat belt anchorage prescribed area is excessively corroded Sill & floor |5.2.6|1
Offside Inner Seat belt anchorage prescribed area is excessively corroded Sill, front to back |5.2.6|1
Rear Exhaust has a major leak of exhaust gases REAR BOX JOINT (6.1.2 (a))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner wheel arch (7.1.1 (a) (i))1
Steering column universal joint insecure |2.1.5|1
Offside Front Upper Vehicle structure has a fracture which is likely to adversely affect braking or steering wishbone mount and anti-roll bar mount. Area is marked in yellow wax. (6.1.1 (a) (ii))1
Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill is holed within 30cm of the drivers seat belt mounting. (6.2.2 (d) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis by anti rollbar mount (6.2.2 (d) (i))1
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/floor (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chasse at anti roll bar mount point (5.3.6 (a) (i))1
Exhaust Lambda reading after 2nd fast idle outside specified limits 1.431 (8.2.1.2 (c))1
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid cailper |3.6.A.1|1
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid at Caliper (1.1.16 (b) (i))1
Offside Front Lower Suspension arm insecurely attached (5.3.3 (a) (i))1
Front Coil spring fractured or broken both (5.3.1 (b) (i))1
Front Valve stem seriously damaged both (5.2.3 (j))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill (6.2.2 (d) (i))1
Offside Front Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2|1
Offside Rear Coil spring fractured or broken broken (5.3.1 (b) (i))1
Offside Front Floor excessively deteriorated seat mounting area (6.2.4 (a) (i))1
Offside Front Outer Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3|1
Coil spring fractured or broken nearside rear |5.3.1 |b| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis,inside wheel arch (5.3.6 (a) (i))1
Offside Rear Exhaust system not adequately supported hanger bracket broken off |7.1.1|1
Offside Front Suspension spring mounting prescribed area is excessively corroded INNER WHEEL ARCH |2.4.A.3|1
Nearside Rear Floor excessively deteriorated inner floor at sill |6.2.4 |a| |i||1
Offside Front Floor excessively deteriorated floor at lower part of front wing |6.2.4 |a| |i||1
Electrical wiring heavily deteriorated earth wire at rear diff |4.11 |b| |ii||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis corroded and holed buy anti-roll bar mounting. (6.1.1 (c) (i))1
Offside Rear Seat belt anchorage prescribed area is excessively corroded sill end |5.2.6|1
Front Suspension component mounting prescribed area is excessively corroded wheel arches at anti roll bar brackets |2.4.A.3|1
Nearside Front Position lamp not working Side light |4.2.1 |a||1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor pan |7.1.1 |a| |i||1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor pan |7.1.1 |a| |i||1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Chassis |5.3.6 |a| |ii||1
Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Both rear inner quarter sills |5.3.6 |a| |ii||1
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Floor |5.3.6 |a| |ii||1
Service brake excessively fluctuating Both front |1.2.1 |e||1
Offside Front Anti-roll bar linkage fractured Drop link (5.3.3 (b) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in engine bay (5.3.6 (a) (i))1
Offside Inner Integral body structure is fractured and structural rigidity is significantly reduced sill (6.1.1 (a) (i))1
Offside Outer Integral body structure inadequately repaired such that structural rigidity is significantly reduced sill (6.1.1 (d) (i))1
Nearside Inner Integral body structure modified such that structural rigidity is significantly reduced sill (6.1.1 (d) (i))1
Nearside Outer Integral body structure is fractured and structural rigidity is significantly reduced sill (6.1.1 (a) (i))1
Nearside Integral body structure inadequately repaired such that structural rigidity is significantly reduced chassis rail (6.1.1 (d) (i))1
Integral body structure is fractured and structural rigidity is significantly reduced floor (6.1.1 (a) (i))1
Nearside Rear Inner Integral body structure modified such that structural rigidity is significantly reduced wheel arch (6.1.1 (d) (i))1
Offside Rear Inner Integral body structure is fractured and structural rigidity is significantly reduced wheel arch (6.1.1 (a) (i))1
Exhaust emissions likely to be affected by an exhaust leak joint mid to rear exhaust |8.2.1.1 |b||1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded |7.1.1 |a| |i||1
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i||1
Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))1
Nearside Front Anti-roll bar attachment bracket/mounting fractured D bush mounting detached (5.3.3 (b) (ii))1
Nearside Front Upper Suspension component attachment bracket/mounting corroded and seriously weakened subframe mounting inner wing (5.3.3 (b) (i))1
Nearside Front Suspension component attachment bracket/mounting corroded and seriously weakened subframe mounting floor panel (5.3.3 (b) (i))1
Offside Front Suspension component attachment bracket/mounting corroded and seriously weakened subframe mounting floor panel (5.3.3 (b) (i))1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OUTER SILL AREA |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OUTER SILL AREA |6.1.B.2|1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced excessive corrosion on rear silll (7.1.1 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced excessive corrosion on rear silll (7.1.1 (a) (i))1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis inner wing |6.1.B.2|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis inner wing |6.1.B.2|1
Nearside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings front end of chassis leg. |6.1.B.2|1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front end of chassis leg. |6.1.B.2|1
Offside Anti-roll bar linkage insecure |2.4.G.1|1
Nearside Front Windscreen in an unacceptable condition cracked in two places and chiped (3.2 (c) (i))1
Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill section |marked yellow| |6.1.B.2|1
Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill section |marked yellow| |6.1.B.2|1
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength osr rear sill corroded to excess (5.3.6 (a) (i))1
Nearside Rear Coil spring fractured or broken nsr spring broken (5.3.1 (b) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nsr inner and outer sill corrded (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength osr inner sill coroded (5.3.6 (a) (i))1
Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened nsf chassis / inner roll bar mounting corroded (5.3.3 (b) (i))1
Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened osf chassis / roll bar mounting corroded (5.3.3 (b) (i))1
Central Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii))1
Nearside Power steering component|s| leaking from a failed seal steering rack |2.3.3b|1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced vehicle jacking point (6.1.1 (c) (i))1
Battery insecure and likely to fall from carrier battery tray corroded (4.13 (a) (ii))1
Nearside Front Anti-roll bar attachment bracket/mounting insecure and impairing directional stability (5.3.3 (a) (ii))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear subframe mount, under chassis rail (5.3.6 (a) (i))1
Front Headlamp not in good working order adversely affecting beam image |1.2.4a|1
Nearside Front All direction indicators not working |4.4.1 |a| |ii||1
Emissions not tested Excess smoke also. (8.2.1.2 (d))1
Nearside Front Upper Macpherson strut has an unsafe modification (5.3.3 (c) (i))1
Offside Front Upper Macpherson strut has an unsafe modification (5.3.3 (c) (i))1
Nearside Front Macpherson strut has an unsafe modification fouling top arm (5.3.3 (c) (i))1
Offside Front Macpherson strut has an unsafe modification fouling top arm (5.3.3 (c) (i))1
Nearside Rear Suspension component mounting prescribed area is excessively corroded Sill To Undersill |2.4.A.3|1
Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i||1
Nearside Front Sub-frame cracked |2.4.G.1|1
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired Has had a patch repair that isn`t contentiously seem welded. |7.1.1 |a| |i||1
Parking brake efficiency below requirements |3.7.E.1|1
Rear Exhaust has a major leak of exhaust gases Joint (6.1.2 (a))1
Nearside Headlamp aim projected beam image is obviously incorrect lens milky |4.1.2 |c||1
Offside Headlamp aim projected beam image is obviously incorrect lens milky |4.1.2 |c||1
Nearside Front Anti-roll bar linkage pin or bush excessively worn link rod |5.3.4 |a| |i||1
Offside Front Anti-roll bar linkage pin or bush excessively worn link rod |5.3.4 |a| |i||1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheelarch (5.3.6 (a) (i))1
Brake pipe at imminent risk of failure or fracture burst as brake test performed |1.1.11 |a||1
Exhaust emissions likely to be affected by an exhaust leak rear exhaust box |8.2.2.1 |b||1
Emissions not tested due to exhaust leak |8.2.1.2 |d||1
Nearside Rear Anti-roll bar linkage ball joint excessively worn drop link (5.3.4 (a) (i))1
Nearside Front Subframe mounting prescribed area is excessively corroded chassis leg at inner wing |2.4.A.3|1
Offside Front Subframe mounting prescribed area is excessively corroded chassis leg at inner wing |2.4.A.3|1
Emissions not tested due to bad running |7.3.A.1|1
Emissions not tested missfireing |7.3.A.1|1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded through (7.1.1 (a) (i))1
Nearside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Nearside Front Vehicle structure has a fracture which adversely affects braking or steering above anti roll bar |6.1.A.1|1
Nearside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill area Less than 30cm from s/belt anchorage (6.2.2 (d) (i))1
Offside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Less than 30cm from seatbelt anchorage (6.2.2 (d) (i))1
Nearside Front Anti-roll bar linkage ball joint excessively worn droplink |5.3.4 |a| |i||1
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting FRONT&REAR FLOOR |6.2.2 |d| |i||1
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting FRONT&REAR FLOOR |6.2.2 |d| |i||1
Nearside Rear Exhaust system not adequately supported |7.1.1|1
Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill area. (7.1.1 (a) (i))1
Offside Front Seat belt buckle not functioning as intended did not release under tension; lubricated now ok |7.1.2 |d||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to sill holed (6.1.1 (c) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under sill holed (7.1.1 (a) (i))1
Offside Rear Brake disc significantly and obviously worn Both excessively corroded (1.1.14 (a) (i))1
Exhaust Lambda reading after 2nd fast idle outside specified limits 0.95 (8.2.1.2 (c))1
Exhaust carbon monoxide content at idle exceeds default limits 1.88% (8.2.1.2 (b))1
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits 2.10% (8.2.1.2 (b))1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected anti roll bar mounting (5.3.6 (a) (ii))1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected anti roll bar mounting (5.3.6 (a) (ii))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced arch (7.1.1 (a) (i))1
Nearside Brake pipe leaking on a hydraulic braking system Over rear subframe (1.1.11 (b) (ii))1
Rear Exhaust has a major leak of exhaust gases excessive corrosion rear exhaust joint middle and rear pipes/detached at joint |6.1.2 |a||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/chassis rail |5.3.6 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced central inner sill (7.1.1 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced central inner sill (7.1.1 (a) (i))1
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded inner arch (1.1.21 (e) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mount area (5.3.6 (a) (i))1
Rear Service brake excessively binding both |1.2.1 |f||1
Rear Service brake excessively binding Both (1.2.1 (f))1
Offside Front Brake pipe leaking on an air braking system corroded (1.1.11 (b) (i))1
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outer sill (5.3.6 (a) (ii))1
Front Windscreen wiper blade missing |8.2.2|1
Seat belt anchorage prescribed area strength or continuity significantly reduced Nearside rear inner sill corroded and holed within the nearside front seat belt prescribed area (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/arch (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/arch (7.1.1 (a) (i))1
Nearside Rear Upper Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))1
Front Horn not working (7.7 (a))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor to sill area as marked. (6.1.1 (c) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Under car sill area as marked. (6.1.1 (c) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 30 cm from suspension arm mount (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength antiroll bar mount (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength antiroll bar mount (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel well (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel well (5.3.6 (a) (i))1
Nearside Rear Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3|1
Nearside Headlamp aim beam image kick up to the offside |1.6.B1|1
Offside Front Anti-roll bar linkage has an unsafe modification |5.3.3 |c| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Hole caused by corrosion (6.1.1 (c) (i))1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wing hole caused by corrosion (6.1.1 (c) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i))1
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced side sill |6.1.1 |c| |i||1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting side sill wing |6.2.2 |d| |i||1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor (6.2.2 (d) (i))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor (6.2.2 (d) (i))1
Offside Rear Brake pipe leaking on a hydraulic braking system MARKED (1.1.11 (b) (ii))1
Nearside Front Outer Suspension component mounting prescribed area fractured significantly reducing structural strength sill (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|1
Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt split (5.3.4 (b) (ii))1
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt split (5.3.4 (b) (ii))1
Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt split (5.3.4 (b) (ii))1
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt split (5.3.4 (b) (ii))1
Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened inner wing (5.3.3 (b) (i))1
Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened inner wing (5.3.3 (b) (i))1
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded outer sill area |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail, visible from o/s/front wheel arch |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill area (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill area (5.3.6 (a) (i))1
Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cill (6.1.1 (c) (i))1
Offside Front Macpherson strut insecurely attached x1 mounting nut missing (5.3.3 (a) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer siil (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing to chassis (5.3.6 (a) (i))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill at rear (7.1.1 (a) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced and offside rear sill panels |6.1.1 |c| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front inner sill corroded (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill corroded (5.3.6 (a) (i))1
Front Direction indicator incorrect colour both (4.4.3 (a))1
Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction wiper (3.1 (a) (ii))1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i))1
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i))1
Front Exhaust has a major leak of exhaust gases flexi section (6.1.2 (a))1
Central Exhaust has a major leak of exhaust gases silencer (6.1.2 (a))1
Nearside Front Outer Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))1
Offside Front Outer Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))1
Emissions unable to be completed Engine misfire (8.2.1.2 (d))1
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt upper & lower (5.3.4 (b) (ii))1
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill on both sides (5.3.6 (a) (i))1
Nearside Front Stop lamp(s) all missing (4.3.1 (a) (iii))1
Offside Front Inner Brake lining|s| less than 1.5 mm thick |3.5.1g|1
Rear Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced axle mountings |2.4.G.1|1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corroded and holed (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front section under inner wing corroded and holed (6.1.1 (c) (i))1
Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced inner sill (6.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of anti-roll bar mounting area (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and out sill (5.3.6 (a) (i))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch |6.2.2 |d| |i||1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch |6.2.2 |d| |i||1
Offside Front Position lamp not working sidelight (4.2.1 (a) (ii))1
Nearside Front Headlamp not in a clean condition affecting beam image |1.2.4a|1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill / end cap (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill / end cap (5.3.6 (a) (i))1
Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced chassis by roll bar mounting (6.1.1 (a) (i))1
Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced chassis by roll bar mounting (6.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill end cap (7.1.1 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheelarch (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasssis |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension top |5.3.6 |a| |i||1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i||1
Offside Front Side repeater incomplete |1.5.A1b|1
Offside Front Side repeater insecure |1.4.A.2b|1
Offside Outer Front Lower Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b|1
Nearside Position lamp showing white light to the rear LENS BROKEN (4.2.3 (a) (ii))1
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded wing front corner |5.2.6|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings bottom of chassis leg |6.1.B.2|1
Nearside Front Upper Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))1
Seat belt anchorage prescribed area is excessively corroded nearside and offside sills |5.2.6|1
Suspension arm corroded and seriously weakened nearside and offside lower front suspension arms |2.4.G.1|1
Suspension arm corroded and seriously weakened nearside and offside rear lower suspension |2.4.G.1|1
Suspension arm corroded and seriously weakened nearside and offside rear upper suspension |2.4.G.1|1
Sub-frame corroded and seriously weakened offside of rear sub frame |2.4.G.1|1
Front Supplementary Restraint System warning lamp indicates a fault |5.4.2|1
Nearside Rear Outer Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Rear Outer Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Exhaust has a major leak of exhaust gases back box |7.1.2|1
Nearside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill (6.1.1 (c) (ii))1
Offside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill (6.1.1 (c) (ii))1
Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill (6.1.1 (c) (ii))1
Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill (6.1.1 (c) (ii))1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering floor (6.1.1 (c) (ii))1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis anti roll bar mount (6.1.1 (c) (ii))1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis anti roll bar mount (6.1.1 (c) (ii))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill and outer (7.1.1 (a) (i))1
Rear Hydraulic brake calliper inadequately mounted and braking performance affected (1.1.16 (c) (ii))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill lower wheel arch (6.1.1 (c) (i))1
Nearside Rear Torsion bar attachment bracket fractured |2.4.E.4b|1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under sill (6.1.1 (c) (i))1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wing (6.1.1 (c) (i))1
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded wing |5.2.6|1
Nearside Outer Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected nearside and offside chassis legs (5.3.6 (a) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength marked area (5.3.6 (a) (i))1
Nearside Subframe mounting prescribed area is excessively corroded outersill |2.4.A.3|1
Seat belt anchorage prescribed area strength or continuity significantly reduced Offside rear inner sill panel excessively corroded. (7.1.1 (a) (i))1
Seat belt anchorage prescribed area is excessively corroded Offside outer sill at rear |5.2.6|1
Exhaust has a major leak of exhaust gases Rear joint area |7.1.2|1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor inside sill (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor at chassis leg (5.3.6 (a) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear of outer sill has corroded (6.1.1 (c) (i))1
Power steering inoperative and steering adversely affected tight (2.1.5 (c) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail. (5.3.6 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Door sill. |7.1.1 |a| |i||1
Headlamp aim projected beam image is obviously incorrect Both headlights. (4.1.2 (c))1
Offside Rear Upper Suspension arm rubber bush deteriorated resulting in excessive movement HUB BUSH |2.4.G.2|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis behind wheel |5.3.6 |a| |i||1
Exhaust emissions likely to be affected by an exhaust leak centre to rear silencer joint (8.2.1.1 (b))1
Power steering pipe/hose corroded such that the steering is adversely affected feed and return pipes to rack......may have damaged rack and/or pump (2.1.5 (g) (ii))1
Nearside Front Upper Front suspension retaining device missing |2.5.A.4|1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis above front sub frame & anti foll bar holed (6.1.1 (c) (ii))1
Offside Front Suspension component mounting prescribed area is excessively corroded inner wing/chassis |2.4.A.3|1
Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance Both |1.1.A.3d|1
Front Position lamp not working BOTH (4.2.1 (a) (ii))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis in o/s wheel arch (6.1.1 (c) (i))1
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill panel corroded. (7.1.1 (a) (i))1
Front Power steering fluid level below minimum |2.3.1|1
Front Power steering component|s| leaking |2.3.3b|1
Supplementary Restraint System warning lamp indicates a fault Air Bag |5.4.2|1
Offside Rear Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||1
Offside Rear Lower Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan to inner sill (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Sill Holed (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Sill Holed (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area is inadequately repaired Outer Sill Plate Repair Not A continuous Weld (7.1.1 (a) (i))1
Brake pipe leaking on a hydraulic braking system Front To Rear Pipe (1.1.11 (b) (ii))1
Brake pedal has insufficient reserve travel Goes To Floor Due To leak (1.1.2 (a))1
Brake performance not tested Due To Fluid Leak (1.2.1 (g))1
Engine MIL inoperative or indicates a malfunction indicating a malfunction (8.2.1.2 (h))1
Nearside Rear rear brake recording little or no effort 15% |3.7.B.5a|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill rotted (7.1.1 (a) (i))1
Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone A (8.3.1b)1
Nearside Front Front position lamp(s) not working (1.1.A.3b)1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering by lower inner wheel arch (6.1.1 (c) (ii))1
Offside Front front brakes release unevenly 35 percent inc /dec on brake application |3.7.B.4|1
Rear Exhaust system not adequately supported rubber exhaust hanger split |7.1.1|1
Passenger`s seat insecure bolt loose |6.2.A.1|1
Offside Rear fog lamp does not emit a steady red light |1.3.2e|1
Exhaust has a major leak of exhaust gases at rear silencer / pipe |7.1.2|1
Offside Rear Rear fog lamp emits a light other than red |1.3.2e|1
Nearside Front passenger door cannot be opened from outside the vehicle |6.2.B.1b|1
Nearside Power steering pipe|s| or hose|s| leaking at chassis leg |2.3.3b|1
Nearside Seat belt anchorage prescribed area is excessively corroded at inner sill |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded at inner & outer sill |5.2.6|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inadequate repair |6.1.B.2|1
Central Exhaust has a major leak of exhaust gases on joint |7.1.2|1
Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sills corroded |6.1.1 |c| |i||1
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||1
Nearside Rear Inner Integral body structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced |6.1.1 |b| |ii||1
Braking system leaking Near side rear calipier |3.6.A.1|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill, |5.2.6|1
Exhaust has a major leak of exhaust gases centre section exhaust |7.1.2|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill inner outer and end area |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded sill outer and end area |5.2.6|1
Central Exhaust has a major leak of exhaust gases mid box (6.1.2 (a))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill holed x2 (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill floor/ arch holed (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill holed x2 (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill floor/ arch holed (5.3.6 (a) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch holed (6.1.1 (c) (i))1
Front Service brake imbalanced across an axle 80% limit is 25% (1.2.1 (b) (i))1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner wheel arch (5.3.6 (a) (ii))1
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Chassis leg at subframe/ anti roll bar mounting (5.3.6 (a) (i))1
Nearside Front Upper Vehicle structure inadequately repaired such that it is likely to adversely affect braking or steering (6.1.1 (d) (ii))1
Offside Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii))1
Central Stop lamp not working high viz |1.2.1b|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill section |6.1.B.2|1
Nearside Headlamp light source and lamp not compatible HID conversion fitted |4.1.4 |c||1
Offside Headlamp light source and lamp not compatible HID conversion fitted |4.1.4 |c||1
Emission control equipment obviously defective (8.2.2.1 (a))1
Nearside Rear Integral body structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis, marked yellow (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis, marked yellow (5.3.6 (a) (i))1
Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2|1
Offside Front Brake hose connection leaking on an air braking system (1.1.12 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill area (6.1.1 (c) (i))1
Rear fog lamp missing |4.5.1 |a| |ii||1
Offside Front Headlamp aim projected beam image is obviously incorrect lens cloudy (4.1.2 (c))1
Offside Front Headlamp lens seriously defective lens cloudy (4.1.1 (b) (ii))1
Nearside Front Headlamp aim projected beam image is obviously incorrect lens cloudy (4.1.2 (c))1
Front Exhaust has a major leak of exhaust gases front pipe has 2 of 3 nuts missing and has a major leak from join (6.1.2 (a))1
Nearside Front Headlamp lens seriously defective lens cloudy (4.1.1 (b) (ii))1
Exhaust has a major leak of exhaust gases mid joint blowing (6.1.2 (a))1
Exhaust has a major leak of exhaust gases mid box split (6.1.2 (a))1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill at rear near seat and seatbelt mounting |6.1.B.2|1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Seal (6.2.2 (d) (i))1
Nearside Rear Hydraulic brake calliper leaking and braking performance affected brake caliper leaking fluid (1.1.16 (b) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail by radiator (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail by radiator (5.3.6 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill area (5.3.6 (a) (i))1
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill area (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill area (5.3.6 (a) (i))1
Battery insecure and likely to fall from carrier Excessive corrosion to battery tray (4.13 (a) (ii))1
Emissions not tested overheated on second fast idle test was failing on lambda reading (8.2.1.2 (d))1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower seal |6.1.B.2|1
Headlamp aim projected beam image is obviously incorrect Both sides (4.1.2 (c))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail heavily corroded next to anti roll bar mount (5.3.6 (a) (i))1
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill panel corroded (7.1.1 (a) (i))1
Headlamp aim projected beam image is obviously incorrect Both faded and no beam image (4.1.2 (c))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch area |6.1.1 |c| |i||1
Offside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced outer sill (6.1.1 (d) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front chassis leg at anti-roll bar mounting corrosion is on the underside of the chassis leg (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced excessive corrosion to sill panel within 30 centermitres of seat belt mount (7.1.1 (a) (i))1
Headlamp light source and lamp not compatible (4.1.4 (c))1
Offside Front Front position lamp|s| incorrect colour blue |1.1.A.3e|1
Rear Rear fog lamp obviously incorrectly positioned |1.3.2a|1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting above the anti-roll stabilizer bar (6.2.2 (d) (i))1
Nearside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))1
Offside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))1
Nearside Rear Lower Shock absorber has an excessively worn bush |2.7.4|1
Offside Rear Lower Shock absorber has an excessively worn bush |2.7.4|1
Front Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Offside Front Front position lamp|s| not working side light |1.1.A.3b|1
Offside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sill. |5.2.6|1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill. (7.1.1 (a) (i))1
Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill. |7.1.1 |a| |i||1
Nearside Front Seat belt anchorage prescribed area is excessively corroded rear outer cill |5.2.6|1
Offside Front Seat belt anchorage prescribed area is excessively corroded rear outer cill |5.2.6|1
Offside Rear Suspension locking device ineffective (5.3.6 (b))1
Brake pipe leaking on an air braking system front to rear (1.1.11 (b) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill corroded 30cm to axle mount (5.3.6 (a) (i))1
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength NSR outer sill excessively corroded 30cm to suspension mount (5.3.6 (a) (i))1
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OSR outer sill excessively corroded 30cm to suspension mount (5.3.6 (a) (i))1
Offside Front Body panel damaged and likely to cause injury WING DAMAGED AND INSECURE MAY CAUSE INJURY (6.2.1 (a) (i))1
Offside Front Anti-roll bar linkage ball joint likely to become detached HAS ALREADY BECOME DETACHED (5.3.4 (a) (ii))1
Offside Front Body component damaged and likely to cause injury door mirror casing (6.2.1 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill excessively corroded (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail near arb D bush mounting (5.3.6 (a) (i))1
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill + floor pain marked in yellow (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar area on chassis rail |5.3.6 |a| |i||1
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded inner wheel arch, inner and outer sills |5.2.6|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail by anti roll bar attachment |2.4.A.3|1
Exhaust has a major leak of exhaust gases back box bolt broken (6.1.2 (a))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced looking through wheel arch chassis leg corroded (6.1.1 (c) (i))1
Offside Rear Headlamp aim not tested |1.8.A.1c|1
Exhaust system insecure rear sliencer (6.1.2 (a))1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower sill |6.1.B.2|1
Emissions not tested failed fast test on lambda, no fuel to carry out full emissions test (8.2.1.2 (d))1
Exhaust Lambda reading after 2nd fast idle outside specified limits First Idle Test - 1.043 - Second Fast Idle Test - 1.130 (8.2.1.2 (c))1
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded Side sill |2.4.A.3|1
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded side sill |5.2.6|1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill & outrigger (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer sill & inner wheelarch |7.1.1 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner /outer sills & wheelarch |7.1.1 |a| |i||1
Central Rear Brake pipe leaking |3.6.A.1|1
Offside Front Road wheel fixing missing nut (5.2.1 (a) (i))1
Nearside Rear Brake cable has a seized clevis joint pivot |3.5.1c|1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill at rear (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill holed (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by anti roll bar fixing (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by anti roll bar fixing (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded floor/jacking point |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded floor to sill section. |2.4.A.3|1
Nearside Seat belt anchorage prescribed area is excessively corroded inner lower floor to sill. |5.2.6|1
Front Electrical wiring likely to touch hot or rotating parts lambda sensor on down pipe (4.11 (a) (iii))1
Rear Electrical wiring likely to touch hot or rotating parts lambda sensor rubbing on prop shaft (cat fitted badly) (4.11 (a) (iii))1
Offside Front Lower Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))1
Offside Stop lamp not working 580 |1.2.1b|1
Nearside Front position lamp|s| not working 501 |1.1.A.3b|1
Offside Front Braking system leaking brake caliper/ hose |3.6.A.1|1
Service brake excessively fluctuating both rear (1.2.1 (e))1
Exhaust silencer likely to become detached middle to rear (8.1.1 (b) (ii))1
Nearside Front Headlamp aim so that beam "kick up" is not visible on the screen |1.8.B.1|1
Undertray insecure (8.1.1 (b) (i))1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor holed (5.3.6 (a) (i))1
Exhaust carbon monoxide content at idle exceeds manufacturers specified limits 8.123 (8.2.1.2 (b))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear outer inner sills (5.3.6 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Sill panel (7.1.1 (a) (i))1
Emissions unable to be completed Lambda too high (8.2.1.2 (d))1
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill and wheelarch |5.2.6|1
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill and wheelarch |5.2.6|1
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill behind quarter panel (6.2.2 (d) (i))1
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill behind quarter panel (6.2.2 (d) (i))1
Nearside Front Brake cable has restricted free movement |1.1.15 |e||1
Fuel cap/sealing device ineffective Temporary cap fitted (6.1.3 (b) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Boot floor/battery tray (6.1.1 (c) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Boot floor/inner wing (6.1.1 (c) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced upper section of inner wheel arch (6.1.1 (c) (i))1
Brake performance unable to be tested Due to excessive corrosion on brake pipe (1.2.1 (g))1
Nearside Front Anti-roll bar linkage likely to become detached (5.3.3 (a) (ii))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill panel |7.1.1 |a| |i||1
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength Boot floor. (5.3.6 (a) (i))1
Exhaust has a major leak of exhaust gases Between centre and rear of exhaust. (6.1.2 (a))1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded. (7.1.1 (a) (i))1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis within prescribed area of anti roll bar mounting |6.1.1 |c| |ii||1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis within prescribed area of anti roll bar mounting |6.1.1 |c| |ii||1
Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction national trust sticker (3.1 (a) (ii))1
Nearside Rear Body panel corroded and likely to cause injury outer sill (6.2.1 (a) (i))1
Offside Lower Body panel corroded and likely to cause injury outer sill (6.2.1 (a) (i))1
Offside Front Position lamp not working 1x #501 bulb fitted (4.2.1 (a) (ii))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill and inner arch area (7.1.1 (a) (i))1
Seat belt anchorage prescribed area strength or continuity significantly reduced offside outer sill (7.1.1 (a) (i))1
Offside Outer Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Central Rear Exhaust silencer likely to become detached rear back box (8.1.1 (b) (ii))1
Rear Exhaust silencer insecure |8.1.1 |b| |i||1
Suspension component insecurely attached rear subframe brace |5.3.3 |a| |i||1
Nearside Rear Tie bar/rod ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Rear Hydraulic brake calliper leaking leaking at parking brake pivot (1.1.16 (b) (i))1
Nearside Stop lamp(s) not working poor connection (4.3.1 (a) (ii))1
Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2|1
Central Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2|1
Front Position lamp not working offside and nearside (4.2.1 (a) (ii))1
Offside Hazard warning lamps inoperative none working (4.4.1 (e))1
Offside Direction indicator not working none working (4.4.1 (a) (ii))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sills |5.3.6 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill to outer sill (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill to outer sill (7.1.1 (a) (i))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill to floor (5.3.6 (a) (i))1
Offside Front Body has a sharp edge caused by corrosion number plate holder |6.1.C.1|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded body sill |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded body sill |5.2.6|1
Offside Rear Outer Seat belt anchorage prescribed area is inadequately repaired sill- not continuously welded (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area is inadequately repaired chassis (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/wheel arch (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/wheel arch (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded |7.1.1 |a| |i||1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill rotted away (6.1.1 (c) (i))1
Nearside Rear Upper Exhaust has a major leak of exhaust gases box/system |6.1.2 |a||1
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both front upper chassis rails |6.1.1 |c| |i||1
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer door sill |2.4.A.3|1
Offside Front Anti-roll bar linkage damaged and seriously weakened link arm broken |5.3.3 |b| |i||1
Front Subframe mounting prescribed area is excessively corroded offside & nearside |2.4.A.3|1
Front Suspension component mounting prescribed area is excessively corroded offside & nearside |2.4.A.3|1
Rear Inner Brake disc in such a condition that it is seriously weakened both sides |1.1.14 |a| |ii||1
Rear Suspension component mounting prescribed area is excessively corroded outer sills |2.4.A.3|1
Nearside Front Coil spring corroded so that its cross sectional area is reduced and seriously weakened (5.3.1 (b) (i))1
Central Front Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a))1
Emissions not tested leaking at front (8.2.1.2 (d))1
Exhaust has a major leak of exhaust gases manifold/downpipe area (6.1.2 (a))1
Integral body structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced both rear sills welded but not to mot standard |6.1.1 |b| |ii||1
Nearside Body panel likely to become detached wing |6.2.1 |a| |ii||1
Rear Bumper damaged and likely to cause injury when grazed or contacted |6.1.4 |a| |i||1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Floor area |7.1.1 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Floor area |7.1.1 |a| |i||1
Nearside Rear Exhaust emissions likely to be affected by an exhaust leak intermediate pipe cracked (8.2.1.1 (b))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in front of suspension bed (6.1.1 (c) (i))1
Nearside Front Headlamp not working on dipped beam 1 x hb4 bulb fitted (4.1.1 (a) (ii))1
Offside Front Headlamp aim projected beam image is obviously incorrect bulb was fitted wrong (4.1.2 (c))1
Offside Front Obligatory mirror missing |8.1.1|1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg badly corroded. |6.1.A.1|1
Offside Front Vehicle structure has a modification which adversely affects braking or steering chassis leg badly corroded |6.1.A.1|1
Nearside Front Exhaust system insecure (6.1.2 (a))1
Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Both sills (7.1.1 (a) (i))1
Nearside Front Upper Subframe mounting prescribed area is excessively corroded chassis rail |2.4.A.3|1
Offside Front Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))1
Brake performance not tested due to metal brake pipe leaking (1.2.1 (g))1
Offside Rear Brake hose connection leaking on a hydraulic braking system |1.1.12 |c| |ii||1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corroded and holed (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/chassis (5.3.6 (a) (i))1
Power steering component|s| leaking from a failed seal |2.3.3b|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced section corroded (6.1.1 (c) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel /arch (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill outer skin insecure (7.1.1 (a) (i))1
Nearside Rear Braking system leaking (1.1.3 (d))1
Emissions not tested due to c/o =too high |8.2.1.2 |d||1
Headlamp aim headlamp not in good working order adversely affecting beam image |1.2.4b|1
Nearside Front Position lamp lens seriously defective (4.2.1 (b))1
Nearside Rear Suspension component mounting prescribed area is inadequately repaired sill, welding has failed. (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/inner sill (5.3.6 (a) (i))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floorpan/sill (7.1.1 (a) (i))1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/floor corroded at front and rear (7.1.1 (a) (i))1
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/floor corroded at front (7.1.1 (a) (i))1
Nearside Rear Service brake effort inadequate at a wheel 73kg (1.2.1 (a) (i))1
Offside Rear Service brake effort inadequate at a wheel 93kg (1.2.1 (a) (i))1
Brake pedal anti-slip provision missing |1.1.2 |c||1
Nearside Rear Lower Suspension arm corroded and seriously weakened marked in yellow chalk |5.3.3 |b| |i||1
Nearside Headlamp incorrect colour (4.1.4 (a))1
Offside Headlamp incorrect colour (4.1.4 (a))1
Emissions oxygen sensor missing where one was fitted as standard (8.2.1.1 (a))1
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded rear of N/S sill |5.2.6|1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing area (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing area (5.3.6 (a) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner/outer sill (6.2.2 (d) (i))1
Rear Parking brake inoperative on one side low effort on both sides (1.4.1 (a))1
Nearside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced inner and outer sill corroded by jacking point/seat belt mounting area (previous weld cracking from join) (6.1.1 (d) (i))1
Offside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced corroded around top suspension mount (6.1.1 (c) (i))1
Emissions unable to be completed coolant leak /radiator leaking (8.2.1.2 (d))1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.A.1|1
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2|1
Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Emissions unable to be completed engine misfiring (8.2.1.2 (d))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer cill (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer cill (7.1.1 (a) (i))1
Offside Vehicle structure is fractured and structural rigidity is significantly reduced outer sill (6.1.1 (a) (i))1
Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced outer sill (6.1.1 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s and n/s front anti-roll bar mounting prescibed area (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sil (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sil (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced SILL corroded with holes (yellow chalk) (7.1.1 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch/chassis towards front (5.3.6 (a) (i))1
Rear Exhaust has a major leak of exhaust gases leaking at join (6.1.2 (a))1
Nearside Rear Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2|1
Offside Rear Inner Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings wheelarch |6.1.B.2|1
Nearside Rear Upper Trailing arm severely distorted |2.4.G.1|1
Power steering component leaking oil cooler |2.1.5 |a||1
Offside Front Brake prescribed area is excessively corroded sill |1.1.21 |e| |i||1
Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area is excessively corroded where abs sensor goes threw |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower bulkhead by subframe mount (5.3.6 (a) (i))1
Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt both n/s and o/s (2.1.3 (g) (ii))1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6|1
Emissions not tested CAT MISSING |7.3.A.1|1
Front Shock absorbers has an excessively worn bush both sides (5.3.2 (c))1
Front Suspension arm corroded and seriously weakened both sides (5.3.3 (b) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength marked with yellow chalk (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength marked with yellow chalk (5.3.6 (a) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced marked with yellow chalk (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced marked with yellow chalk (7.1.1 (a) (i))1
Central Exhaust has a major leak of exhaust gases cracked at center box weld |7.1.2|1
Offside Front Brake pipe seriously damaged |found during steering lock to lock check| chaffed with chording exposed |2.2.D.2b|1
Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill, front to back is detached from the floor (6.1.1 (c) (i))1
Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill, front to back is detached from the floor (6.1.1 (c) (i))1
Exhaust emissions likely to be affected by an exhaust leak system is deteriorated (8.2.1.1 (b))1
Offside Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii))1
Nearside Rear Vehicle structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i))1
Offside Rear brake caliper securing device excessively deteriorated |3.5.1j|1
Emissions not tested will not run correctly (8.2.1.2 (d))1
Offside Lower Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6|1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg at front subframe mounting (6.1.1 (c) (ii))1
Power steering inoperative Drive belt removed from pump (2.1.5 (c) (i))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under floor (7.1.1 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under floor (7.1.1 (a) (i))1
Emissions not tested Engine overheating on gauge (8.2.1.2 (d))1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill panel. (7.1.1 (a) (i))1
Power steering component|s| leaking rack |2.3.3b|1
Power steering malfunctioning VERY STIFF AND NOISY |2.3.3a|1
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both front chassis legs corroded excessively , (subframe mounts in same place) (6.1.1 (c) (i))1
Offside Front Service brake excessively binding caliper siezed (1.2.1 (f))1
Offside Rear Service brake excessively binding caliper siezed (1.2.1 (f))1
Offside Rear Parking brake inoperative on one side low reading (1.4.1 (a))1
Offside Seat belt anchorage prescribed area is excessively corroded outer and inner sills x 3 holes |5.2.6|1
Nearside Seat belt anchorage prescribed area is excessively corroded outer and inner sills x 3 holes |5.2.6|1
Nearside Front Hydraulic brake calliper damaged caliper seized |1.1.16 |a| |i||1
Offside Rear Hydraulic brake calliper damaged caliper seized |1.1.16 |a| |i||1
Nearside Front Body panel corroded and likely to cause injury wing (6.2.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area is inadequately repaired inner and outer sill not welded correctly (7.1.1 (a) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch/floor (6.1.1 (c) (i))1
Offside Rear Battery insecure and likely to fall from carrier battery tray corroded (4.13 (a) (ii))1
Offside Rear Lower Suspension arm insecure and impairing directional stability bolt loose (5.3.3 (a) (ii))1
Steering wheel rim loose aftermarket steering wheel, very flexible/insecure to spokes (2.2.1 (c) (i))1
Offside Fuel pipe damaged front to rear pipes (6.1.3 (c) (ii))1
Emissions not tested no cat fitted (8.2.1.2 (d))1
Offside Front Suspension arm attachment bracket/mounting insecure |2.4.G.1|1
All direction indicators adversely affected by the operation of another lamp All flashing together without operation of hazard switch (4.4.3 (b))1
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corrodied (7.1.1 (a) (i))1
Emissions unable to be completed due to no cat convertor on the vehicle (8.2.1.2 (d))1
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))1
Nearside Rear Brake lever not releasing correctly and functionality of brakes affected calliper arm seized (1.1.2 (b) (ii))1
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Offside Front brake caliper has restricted free movement seized |3.5.1k|1
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area is excessively corroded Inner wheel arch |2.4.A.3|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced holes (6.1.1 (c) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced hole in inner sill . (7.1.1 (a) (i))1
Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength hole in inner sill. (5.3.6 (a) (i))1
Offside Front Anti-roll bar linkage insecure ball joint broken |2.4.G.1|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Upper top mount (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Upper top mount (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg next to anti roll bar bush (5.3.6 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner & outer sill to floor front to rear (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer & inner sill floor front to rear (7.1.1 (a) (i))1
Offside Rear Battery insecure and likely to fall from carrier Boot floor Corroded (4.13 (a) (ii))1
Offside Front Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill and floor (7.1.1 (a) (i))1
Headlamp lens seriously defective both (4.1.1 (b) (ii))1
Front position lamp|s| incorrect colour both |1.1.A.3e|1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill. |6.1.1 |c| |i||1
Nearside Front Lower Suspension arm cracked shock mount |2.4.G.1|1
Offside Rear Anti-roll bar linkage insecure drop link, bottom ball joint |2.4.G.1|1
Emissions not tested due to metallic rattle from engine (8.2.1.2 (d))1
Offside Front Windscreen wiper not working |3.4 |a||1
Nearside Front Windscreen wiper not working |3.4 |a||1
Nearside Rear Anti-roll bar linkage pin or bush likely to become detached |5.3.4 |a| |ii||1
Offside Rear Anti-roll bar linkage pin or bush likely to become detached |5.3.4 |a| |ii||1
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill |5.3.6 |a| |i||1
Rear Sound deadening material insecure back box |8.1.1 |b| |i||1
Rear Exhaust has a major leak of exhaust gases joint corroded |6.1.2 |a||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under wheel arch |5.3.6 |a| |i||1
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded seal panel |marked in yellow| |5.2.6|1
Nearside Front Suspension arm attachment bracket/mounting likely to become detached top mount fixings missing (5.3.3 (a) (ii))1
Offside Front Suspension arm attachment bracket/mounting likely to become detached top mount fixings missing (5.3.3 (a) (ii))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Back of sill/in the rear arch corrosion hole |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded closing sill/underbody panel |5.2.6|1
Offside Front Seat belt damaged (7.1.2 (b) (i))1
Nearside Front Suspension component mounting prescribed area is excessively corroded Underside of chassis rail above anti roll bar mount |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded Underside of chassis rail above anti roll bar mount |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded Inner wheel arch on chassis rail |2.4.A.3|1
Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill corroded |5.2.6|1
Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill corroded |5.2.6|1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch front (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor pan (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded inner arch/ top wishbone mounting |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor area (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor area (7.1.1 (a) (i))1
Headlamp levelling device cannot be operated from the drivers seat (4.1.5 (b))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill near (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill near (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch near (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch near (7.1.1 (a) (i))1
Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i))1
Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i))1
Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i))1
Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt both (5.3.4 (b) (ii))1
Offside Rear Direction indicator not working |4.4.1 |a| |ii||1
Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill holed within 30cm of nearside outer/lower belt mounting |5.2.6|1
Offside Front Suspension component mounting prescribed area is excessively corroded floor/inner sill holed |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced excessive corrosion inner and outer sill (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner wheel arch area (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by suspension arm mount (5.3.6 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch to chassis section (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch to chassis section (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill section (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill section and floor (7.1.1 (a) (i))1
Nearside Front Lower Suspension locking device ineffective balljoint (5.3.6 (b))1
Nearside Front Brake hose leaking on a hydraulic braking system connection into caliper (1.1.12 (c) (ii))1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering jack point (6.1.1 (c) (ii))1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering jack point (6.1.1 (c) (ii))1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis front wheel arch |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis front wheel arch |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill holed & corroded (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill holed & corroded (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded floorpan/sill seam |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded floorpan/sill seam |5.2.6|1
Seat belt anchorage prescribed area strength or continuity significantly reduced offside front floor |7.1.1 |a| |i||1
Nearside Hazard warning switch faulty |1.4.B.1d|1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS (6.1.1 (c) (i))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS (6.1.1 (c) (i))1
Nearside Front Lower Shock absorbers likely to become detached (5.3.2 (a) (ii))1
Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering arch | anti-roll bar mount| |6.1.A.1|1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering arch | anti-roll bar mount| |6.1.A.1|1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength on sill area (5.3.6 (a) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor. (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill. (6.1.1 (c) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced rear outer sill and wheel arch |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area is excessively corroded outersill |5.2.6|1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill under car |7.1.1 |a| |i||1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill under car |7.1.1 |a| |i||1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis rail |5.3.6 |a| |ii||1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Sill corroded and holed |5.2.6|1
Floor excessively deteriorated small hole in front outer floor. (6.2.4 (a) (i))1
Seat belt anchorage prescribed area strength or continuity significantly reduced Offside rear outer sill. (7.1.1 (a) (i))1
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))1
Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings boot floor |6.1.B.2|1
Nearside Rear Outer Integral body structure inadequately repaired such that structural rigidity is significantly reduced sills heavily cataloyed (6.1.1 (d) (i))1
Offside Rear Outer Integral body structure inadequately repaired such that structural rigidity is significantly reduced sill heavily cataloyed (6.1.1 (d) (i))1
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill holed and corroded (6.1.1 (c) (i))1
Nearside Front Upper Subframe mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Front Upper Subframe mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))1
Rear Service brake has no recorded effort at a wheel both sides (1.2.1 (a) (ii))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch x2 (7.1.1 (a) (i))1
Rear coil spring broken Both |2.4.C.1a|1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill |6.2.2 |d| |i||1
Rear Exhaust has a major leak of exhaust gases flange |7.1.2|1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting badly corroded inner and outer front chassis (6.2.2 (d) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced badly corroded inner and outer front chassis (6.1.1 (c) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front section of sill corroded (6.1.1 (c) (i))1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front section of sill corroded (6.2.2 (d) (i))1
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear section of sill corroded (6.2.2 (d) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear section of sill badly corroded (6.1.1 (c) (i))1
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting boot floor corroded (6.2.2 (d) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear sill corroded (6.1.1 (c) (i))1
Offside Rear Upper Anti-roll bar linkage ball joint likely to become detached |5.3.4 |a| |ii||1
Service brake excessively binding (1.2.1 (f))1
Headlamp light intensity severely reduced both (4.1.4 (a))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced nearside inner & outer sill |7.1.1 |a| |i||1
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outter sill |6.1.A.1|1
Exhaust has a major leak of exhaust gases centre silencer |7.1.2|1
Offside Front Road wheel cracked |4.2.A.1a|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/sill |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/sill |5.3.6 |a| |i||1
Front Horn not working |7.7 |a| |ii||1
Offside Rear Lower Suspension component mounting prescribed area is inadequately repaired inner/outer sill |5.3.6 |a| |i||1
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer and inner sills |5.2.6|1
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing,as marked |2.4.A.3|1
Exhaust has a major leak of exhaust gases centre to rear flange rotted away and blowing |7.1.2|1
Drivers airbag missing airbag fitted as original equipment obviously missing (7.1.5 (a))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength FLOOR (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength FLOOR (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill panel |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill panel |2.4.A.3|1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch |6.2.2 |d| |i||1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch |6.2.2 |d| |i||1
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i||1
Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre |6.2.2 |d| |i||1
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i||1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting boot floor |6.2.2 |d| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills corroded (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills corroded (7.1.1 (a) (i))1
Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))1
Exhaust emits excessive smoke or vapour likely to obscure the vision of other road users (8.2.2.2 (c))1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis sprayed yellow |6.1.B.2|1
Battery insecure and likely to fall from carrier carrier corroded (4.13 (a) (ii))1
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded (6.1.1 (c) (i))1
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded (6.1.1 (c) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill to floor , 2 places (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg next to anti roll bar mount holed |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg next to anti roll bar mount holed |2.4.A.3|1
Offside Front Suspension arm corroded and seriously weakened |5.3.3 |b| |i||1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner +outer sill |7.1.1 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill /floor |7.1.1 |a| |i||1
Nearside Front Sub-frame corroded and seriously weakened |5.3.3 |b| |i||1
Nearside Front Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f|1
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Front Coil spring fractured or broken (5.3.1 (b) (i))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i||1
Nearside Rear Suspension arm has an unsafe modification |5.3.3 |c| |i||1
Offside Rear Suspension arm has an unsafe modification |5.3.3 |c| |i||1
Offside Front Outer Body panel corroded and likely to cause injury LOWER WING AREA. (6.2.1 (a) (i))1
Offside Front Inner Body component likely to become detached HEADLIGHT AREA. (6.2.1 (a) (ii))1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL AREA. (6.1.1 (c) (i))1
Offside Front Anti-roll bar linkage fractured detached at joint |2.4.G.1|1
Nearside Front Sub-frame attachment bracket/mounting insecure and impairing directional stability bolts loose x3 (5.3.3 (a) (ii))1
Electrical wiring insecure and connectors likely to become disconnected BATTERY TERMINALS (4.11 (a) (ii))1
Nearside Front Suspension arm insecure and impairing directional stability (5.3.3 (a) (ii))1
Offside Front Suspension arm insecure and impairing directional stability (5.3.3 (a) (ii))1
Offside Stop lamp has less than 50% of the light sources illuminating |1.2.1b|1
Front Anti-roll bar ball joint excessively worn o/s and n/s (5.3.4 (a) (i))1
Nearside Front Lower Suspension arm ball joint likely to become detached split pin missing (5.3.4 (a) (ii))1
Nearside Front Track rod end ball joint worn to the extent there is a serious risk of detachment split pin missing (2.1.3 (b) (ii))1
Offside Front Anti-roll bar synthetic mounting deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Rear Anti-roll bar attachment bracket/mounting nut missing |2.4.G.1|1
Nearside Electrical wiring damaged, likely to cause a short |1.9.2b|1
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits Emissions Failed To Meet Legal Requirements (8.2.1.2 (b))1
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced N/S/R Inner Arch Corroded Through (6.1.1 (c) (i))1
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced O/S Mid Chassis Rail Corroded Through (6.1.1 (c) (i))1
Suspension arm ball joint dust cover no longer prevents the ingress of dirt N/S/F Lower Arm Ball Joint Dust Cover Split (5.3.4 (b) (ii))1
Nearside Front Subframe mounting prescribed area is excessively corroded chassis member |2.4.A.3|1
Offside Front Subframe mounting prescribed area is excessively corroded chassis member |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill and floor (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill and outer sill and floor (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner/outer sill & inner arch areas |5.2.6|1
Offside Rear Suspension component mounting prescribed area is excessively corroded OUTER SILL HOLED AND CORRODED |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded OUTER SILL HOLED AND CORRODED |2.4.A.3|1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/floor (6.1.1 (c) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing and chassis leg, above antiroll bar mount, seen from under bonnet |5.3.6 |a| |i||1
Service brake imbalanced across an axle |1.2.1 |b| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing at anti roll bar mounting (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis and inner wheel arch (5.3.6 (a) (i))1
Nearside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill under car (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear outer sills (5.3.6 (a) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner body (6.1.1 (c) (i))1
Exhaust has a major leak of exhaust gases middle to back box joint |7.1.2|1
Nearside Front Anti-lock braking system wheel speed sensor missing (1.6 (c))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet (6.1.1 (c) (i))1
Nearside Outer Rear brake disc excessively scored |3.5.1h|1
Exhaust has a major leak of exhaust gases centre pipe to rear pipe flange has corroded and one of the bolts has failed (6.1.2 (a))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor jacking point area |6.1.1 |c| |i||1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor jacking point area |6.1.1 |c| |i||1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/floor (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill and floor (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre inner sill (7.1.1 (a) (i))1
Nearside Seat belt anchorage prescribed area is excessively corroded bodysill |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded bodysill |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill/outer wheel arch |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill/outer wheel arch |5.2.6|1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i))1
Power steering inoperative and steering adversely affected Power steering belt missing (2.1.5 (c) (ii))1
Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction Phone holder (3.1 (a) (ii))1
Nearside Front Headlamp aim beam image kick up to the offside |1.6.B1|1
Nearside Front Lower Suspension rod insecurely attached |5.3.3 |a| |i||1
Offside Front Shock absorbers has an excessively worn bush Lower bush |5.3.2 |c||1
Offside Seat belt anchorage prescribed area is excessively corroded door sill |5.2.6|1
Offside Front Seat belt anchorage prescribed area is excessively corroded osr outer sill panel |5.2.6|1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded (6.1.1 (c) (i))1
Offside Front Lower Front suspension has excessive movement at a suspension ball joint |2.5.A.1c|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded Top of the inner wheel arch |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded Top of the inner wheel arch |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer door sill |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer door sill |5.3.6 |a| |i||1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/arch (6.1.1 (c) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/arch (6.1.1 (c) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top mount area (multiple holes) (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top mount area (multiple holes) (5.3.6 (a) (i))1
Nearside Rear Drag link end ball joint has excessive play |2.1.3 |b| |i||1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced at sill area |7.1.1 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced at sill area |7.1.1 |a| |i||1
Offside Seat belt anchorage prescribed area is excessively corroded body sill |5.2.6|1
Nearside Outer Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))1
Offside Outer Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))1
Parking brake lever has excessive movement indicating incorrect adjustment handbrake lever has significant travel (1.1.6 (c))1
Central Braking system leaking Front to rear metal brake pipe corroded |3.6.A.1|1
Brake performance not tested Brake pipe corroded and leaking fluid |3.7.A.1|1
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Roll bar mount |5.3.6 |a| |i||1
Exhaust Lambda reading after 2nd fast idle outside specified limits leak to exhaust (8.2.1.2 (c))1
Nearside Suspension component mounting prescribed area is excessively corroded sill inner and outer |2.4.A.3|1
Offside Suspension component mounting prescribed area is excessively corroded sill inner and outer |2.4.A.3|1
Brake pedal has insufficient reserve travel h brake (1.1.2 (a))1
Offside Front Body component corroded and likely to cause injury wing bottom attached to front sill (6.2.1 (a) (i))1
Nearside Rear Steering component mounting prescribed area is excessively corroded sill |2.1.2 |e| |i||1
Stop lamp not working all |1.2.1b|1
Nearside Upper Front suspension retaining device missing |2.5.A.4|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor / inner sill (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor / inner sill (5.3.6 (a) (i))1
Offside Parking brake inoperative on one side low effort (1.4.1 (a))1
Position lamp adversely affected by the operation of another lamp When position lights turned on, revers light comes on and sounds sensors (4.2.3 (c))1
Power steering pipe/hose leaking in engine compartment (2.1.5 (a))1
Nearside Rear Coil spring fractured or broken top of spring (5.3.1 (b) (i))1
Offside Front Suspension spring mounting prescribed area is excessively corroded Chassis |2.4.A.3|1
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill holed and corroded and fibre glass/filler in the area |5.2.6|1
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill holed and corroded and fibre glass/filler in the area |5.2.6|1
Nearside Front Bonded suspension unit deteriorated and cannot function as intended Shocker lower bush. |2.4.F.3|1
Offside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill back plate (6.2.2 (d) (i))1
Nearside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sealing (5.3.6 (a) (i))1
Brake pipe leaking on an air braking system across rear axle (1.1.11 (b) (i))1
Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2|1
Centre Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2|1
Central Stop lamp not working High level |1.2.1b|1
Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii))1
Offside Lower Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outter sill (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner outer sills (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded floor panel |2.4.A.3|1
Nearside Front Position lamp not working and offside front |4.2.1 |a||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and offside front chassis legs (5.3.6 (a) (i))1
Nearside Front Upper Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wish bone mounting (5.3.6 (a) (ii))1
Offside Front Upper Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wish bone mounting (5.3.6 (a) (ii))1
Emissions unable to be completed exhaust blown / cat missing (8.2.1.2 (d))1
Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mounting inner front wheel arch (5.3.6 (a) (i))1
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock mounting inner front wheel arch (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mounting ( chassis box section ) (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mounting ( chassis box section ) (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength boot pan battery box (5.3.6 (a) (i))1
Nearside Outer Seat belt anchorage prescribed area is inadequately repaired sill not fully welded (7.1.1 (a) (i))1
Offside Outer Seat belt anchorage prescribed area is inadequately repaired sill not fully welded (7.1.1 (a) (i))1
Offside Rear Battery insecure and likely to fall from carrier battery box corroded boot well (4.13 (a) (ii))1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassie leg anti roll bar (6.2.2 (d) (i))1
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor (6.2.2 (d) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Floor to sill area (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill area holed (7.1.1 (a) (i))1
Offside Rear Lower Suspension arm corroded and seriously weakened not repairable |2.4.G.1|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded sill and sill back etc |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill,sill back etc and inner arch |5.2.6|1
Nearside Front Drag link end seriously misaligned tie bar bent (2.1.3 (e))1
Nearside Rear Suspension arm damaged and seriously weakened hub misaligned (5.3.3 (b) (i))1
Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2|1
Hydraulic fluid leaking excessively power steering (8.4.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected floor by subframe mount (5.3.6 (a) (ii))1
Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2|1
Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2|1
Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor pan |6.1.B.2|1
Offside Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6|1
Stop lamp|s| not working high level |4.3.1 |a| |ii||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill panel (5.3.6 (a) (i))1
Brake performance unable to be tested Due to leak (1.2.1 (g))1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis near anti roll bar mounting |2.4.A.3|1
Nearside Lower Seat belt anchorage prescribed area is excessively corroded floor |5.2.6|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg in 2 places (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i||1
Offside Service brake excessively binding (1.2.1 (f))1
Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Offside Front Upper Anti-roll bar linkage ball joint likely to become detached detached from linkage (5.3.4 (a) (ii))1
Emissions unable to be completed exhaust blowing (8.2.1.2 (d))1
Offside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch/inner sill (7.1.1 (a) (i))1
Fuel system component leaking Filter |7.2.3|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Sill end |5.2.6|1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill holed and corroded close to Lower A post reinforcement and around jacking point (6.1.1 (c) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill holed and corroded close to Lower A post reinforcement and around jacking point (6.1.1 (c) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill holed close to lower B post reinforcement and seat belt mount (6.1.1 (c) (i))1
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed |6.2.2 |d| |i||1
Electrical wiring likely to touch hot or rotating parts wiring insecure and touching steering column under bonnet |4.11 |a| |iii||1
Central Inner Brake cable insecure offside horse shoe clip insecure, nearside horse shoe clip missing |1.1.15 |c||1
Offside Outer Brake cable damaged sleeve |1.1.15 |a||1
Nearside Rear Drag link end ball joint has excessive play |2.2.B.1f|1
Offside Rear Drag link end ball joint has excessive play |2.2.B.1f|1
Offside Subframe mounting prescribed area is excessively corroded chassis rail |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded wheelarch |2.4.A.3|1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor/inner wing (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced box section/inner sill (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced box section/inner sill (7.1.1 (a) (i))1
Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|1
Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt top arm ball joint |2.4.G.2|1
Offside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt top arm ball joint |2.4.G.2|1
Nearside Front Suspension component mounting prescribed area is excessively corroded next to anti roll bar |2.4.A.3|1
Offside Front Subframe mounting prescribed area is excessively corroded inner wheel arch area |2.4.A.3|1
Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt both sides (2.1.3 (g) (ii))1
Offside Subframe mounting prescribed area excessively corroded significantly reducing structural strength and nearside rear |5.3.6 |a| |i||1
Offside Rear Seat belt anchorage prescribed area is excessively corroded innersill |5.2.6|1
Offside Front Suspension component mounting prescribed area is excessively corroded innerwing |2.4.A.3|1
Nearside Front Brake hose leaking on a hydraulic braking system pipe to caliper (1.1.12 (c) (ii))1
Offside Rear Hydraulic brake calliper leaking piston area (1.1.16 (b) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i))1
Offside Front Steering linkage ball joint has excessive play Drum stick (2.1.3 (b) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded/hole (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced hole in sill /corrosion (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under wing anti roll bar mounting |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under wing anti roll bar mounting |5.3.6 |a| |i||1
Centre Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` Item removed from mirror |8.3.1e|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Strut top mounting area |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Close to Subframe mounting |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch near Anti roll bar mounting |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch near Anti roll bar mounting |5.3.6 |a| |i||1
Nearside Rear Stop lamp insecure |1.2.1a|1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg, (6.2.2 (d) (i))1
Nearside Rear Integral body structure has excessive corrosion which adversely affects braking or steering boot floor (6.1.1 (c) (ii))1
Rear Upper coil spring broken both sides |2.4.C.1a|1
Suspension component mounting prescribed area is excessively corroded both sides rear outer sills |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded under wheel arch inner wing |2.4.A.3|1
Offside Body has a sharp edge caused by damage Rear view mirror |6.1.C.1|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Floor pan area ( marked in yellow) (7.1.1 (a) (i))1
Nearside Rear Suspension component mounting prescribed area is inadequately repaired Outer sill (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor pan/ inner sill (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor pan/ inner sill (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by front anti roll bar o/s mounting |5.3.6 |a| |i||1
Offside Rear Vehicle structure modified such that structural rigidity is significantly reduced (6.1.1 (d) (i))1
Nearside Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|1
Offside Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|1
Nearside Front Anti-roll bar insecurely attached (5.3.3 (a) (i))1
Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sil and nearside outer sil (7.1.1 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength pannel (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer and inner sills (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer and inner sills (7.1.1 (a) (i))1
Track rod end seriously misaligned (2.1.3 (e))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS MEMBER |5.3.6 |a| |i||1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS MEMBER |5.3.6 |a| |i||1
Emissions not tested BAD WATER LEAK |7.3.A.1|1
Vehicle structure has a fracture which is likely to adversely affect braking or steering (6.1.1 (a) (ii))1
Nearside Front Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))1
Offside Front Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))1
Offside Front Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength under fuse box (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i))1
Offside Rear Lower Suspension arm corroded and seriously weakened Wishbone (5.3.3 (b) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floors to Sill Rotted (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floors to Sill Rotted (5.3.6 (a) (i))1
Exhaust Lambda reading after 2nd fast idle outside specified limits Too High (8.2.1.2 (c))1
Exhaust has a major leak of exhaust gases Centre Section blowing (6.1.2 (a))1
Nearside Front Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wing to strut top mount (5.3.6 (a) (i))1
Offside Front Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wing to strut top under fuse box (5.3.6 (a) (i))1
Front Vehicle structure has a fracture which is likely to adversely affect braking or steering chassis legs at both sides at subframe mounting point (6.1.1 (a) (ii))1
Offside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))1
Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wing to chassis leg (5.3.6 (a) (i))1
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i))1
Offside Outer Suspension component mounting prescribed area is excessively corroded sill area |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill end (7.1.1 (a) (i))1
Nearside Front Steering system fouling undertray (2.1.4 (a))1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced central floor seam to sill area (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section next to anti roll bar fixing (5.3.6 (a) (i))1
Service brake lagging in operation possibly caliper slide pins / pads sticking (1.2.1 (d))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill and undersill |7.1.1 |a| |i||1
Offside Front Upper Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1|1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer sill |7.1.1 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch in 2 places |7.1.1 |a| |i||1
Offside Front Headlamp aim projected beam image is obviously incorrect bulb not fitted correctly?? |4.1.2 |c||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced cill (7.1.1 (a) (i))1
Front Service brake lagging in operation (1.2.1 (d))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis Leg |5.3.6 |a| |i||1
Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened Chassis leg |5.3.3 |b| |i||1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i))1
Nearside Rear Brake disc significantly and obviously worn inner surface (1.1.14 (a) (i))1
Front Brake disc significantly and obviously worn n/s & o/s (1.1.14 (a) (i))1
Nearside Anti-roll bar has excessive play in a ball joint |2.4.G.2|1
Offside Anti-roll bar has excessive play in a pin/bush |2.4.G.2|1
Front Floor excessively deteriorated o/s and n/s under arch (6.2.4 (a) (i))1
Nearside Rear Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))1
Nearside Body component damaged and likely to cause injury wing mirror (6.2.1 (a) (i))1
Emissions not tested due to exhaust blowing at joint between middle and rear sections (8.2.1.2 (d))1
Brake master cylinder leaking hydraulic fluid |3.6.G.1f|1
Headlamp light source and lamp not compatible led bulbs fitted (4.1.4 (c))1
Drivers airbag missing sports steering wheel fitted (7.1.5 (a))1
Supplementary restraint system warning lamp indicates a fault drivers air bag missing (7.1.6 (a))1
Offside Subframe mounting prescribed area excessively corroded significantly reducing structural strength and nearside rear sills |5.3.6 |a| |i||1
Front Lower Suspension arm ball joint excessively worn BOTH (5.3.4 (a) (i))1
Exhaust has a major leak of exhaust gases rear clamp |6.1.2 |a||1
Offside Front Brake hose excessively damaged |1.1.12 |b| |ii||1
Rear Emissions not tested very bad miss fire on engine and stalling (8.2.1.2 (d))1
Offside Outer Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|1
Nearside Rear Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3|1
Offside Front Supplementary Restraint System warning lamp indicates a fault |5.4.2|1
Offside Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|1
Offside Front position lamp|s| insecure |1.1.A.3a|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor area |5.2.6|1
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill front and rear |6.1.B.2|1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS RAIL. (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL. (5.3.6 (a) (i))1
Offside Rear Position lamp lens seriously defective (4.2.1 (b))1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wing |6.1.B.2|1
Rear Brake pipe connection leaking on a hydraulic braking system MAIN |1.1.11 |b| |ii||1
Offside Rear Hydraulic brake calliper leaking brake caliper |1.1.16 |b| |i||1
Exhaust has a major leak of exhaust gases tail pipe/back box |7.1.2|1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner floor to sill (6.2.2 (d) (i))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner floor to sill (6.2.2 (d) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner floor to sill (6.2.2 (d) (i))1
Rear Suspension component mounting prescribed area is excessively corroded both sills |2.4.A.3|1
Offside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))1
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill end |5.2.6|1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill by wheel arch (6.1.1 (c) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill by wheel arch (6.1.1 (c) (i))1
Offside Front Upper Brake stationary pin locking device missing |3.5.1l|1
Emissions unable to be completed excessive exhaust leak rear (8.2.1.2 (d))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area (6.1.1 (c) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and Outer sill (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Diff Mounting Fixing (6.1.1 (c) (i))1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL |7.1.1 |a| |i||1
Emissions unable to be completed lack of fuel (8.2.1.2 (d))1
Exhaust has a major leak of exhaust gases Center pipe blowing. (6.1.2 (a))1
Offside Front Seat belt anchorage prescribed area is excessively corroded floor to sill |5.2.6|1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to arch (5.3.6 (a) (i))1
Offside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c))1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill/sill end |5.2.6|1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering FRONT SUSPENSION MOUNTING AND FRONT ANTI ROLL BAR MOUNTING. (6.1.1 (c) (ii))1
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected JACKING POINT AND SUSPENSION MOUNTING (5.3.6 (a) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing area (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner arch near shocker upper mount (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch near shocker upper mount (5.3.6 (a) (i))1
Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering chassis and inner wing (6.1.1 (c) (ii))1
Offside Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail (6.1.1 (c) (ii))1
Central Front Undertray likely to become detached metal under tray coroded and insecure (6.2.1 (a) (ii))1
Nearside Front Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction stick on sun visor (3.1 (a) (ii))1
Offside Front Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction stick on sun visor (3.1 (a) (ii))1
Nearside Front Lower Body panel insecure wing corroded and insecur at bottom (6.2.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill area exsessivly corroded (7.1.1 (a) (i))1
Offside Headlamp light intensity severely reduced lens is frosty |4.1.4 |a||1
Nearside Front Upper Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Front Suspension component mounting prescribed area is excessively corroded visible from wheel arch and underneath vehicle |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded visible from under bonnet and underneath vehicle |2.4.A.3|1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis - inner wheel arch (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/anti-roll bar mtg (5.3.6 (a) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill at rear (6.1.1 (c) (i))1
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i))1
Rear Exhaust has a major leak of exhaust gases at tailpipe (6.1.2 (a))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced and outer (7.1.1 (a) (i))1
Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering floor (6.1.1 (c) (ii))1
Offside Rear Wheel bolt|s| loose |4.2.A.1e|1
Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides chassi corroded (5.3.6 (a) (i))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength middle floor (5.3.6 (a) (i))1
Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides inner wheel arches (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Inner sill / floor |5.2.6|1
Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front and rear sill |6.1.1 |c| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasis member |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasis member |5.3.6 |a| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill to floor (6.1.1 (c) (i))1
Centre Stop lamp has a product on the lens so it is not visible from a reasonable distance |1.2.1d|1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under valance (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis [front of radiator] (5.3.6 (a) (i))1
Nearside Front Anti-roll bar linkage insecurely attached detached broken (5.3.3 (a) (i))1
Emissions unable to be completed (8.2.2.2 (e))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill, close to front of rear wheelarch. small hole, unable to ascertain full extent during test. (5.3.6 (a) (i))1
Nearside Headlamp aim beam image obviously incorrect milky |1.8.A.1b|1
Brake pipe leaking on a hydraulic braking system front to rear in securing clip (1.1.11 (b) (ii))1
Rear Emissions not tested |7.0|1
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill and floor has rot holes in various places along its length (6.1.1 (c) (i))1
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill and floor has rot holes in various places along its length (6.1.1 (c) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i))1
Brake performance not tested nearside front brake hose burst |3.7.A.1|1
Offside Front suspension retaining device ineffective |2.5.A.4|1
Nearside Front suspension retaining device ineffective |2.5.A.4|1
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill/floor |5.2.6|1
Suspension component mounting prescribed area is excessively corroded both front chassi/anti roll bar mounting points outer and lower facing sides |2.4.A.3|1
Track rod end loose |2.2.B.1d|1
Seat belt anchorage prescribed area is excessively corroded Nearside sill to floor |5.2.6|1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill chalked in yellow |7.1.1 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis, next to anti roll bar mounting, chalked in yellow, arrows pointing to location through wheel arch |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis, next to anti roll bar mounting, chalked in yellow, arrows pointing to location through wheel arch |5.3.6 |a| |i||1
Offside Rear Hydraulic fluid leaking excessively caliper (8.4.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded and holed (7.1.1 (a) (i))1
Nearside Position lamp light intensity significantly reduced |4.2.3 |a| |ii||1
Front Position lamp not working both front side lights |4.2.1 |a||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill to floor corroded (7.1.1 (a) (i))1
Anti-roll bar linkage has excessive play in a ball joint o/s rear link arm mounting nut loose |2.4.G.2|1
Nearside Rear Shock absorber casing corroded externally so the unit does not function |2.7.2a|1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both side rear wishbones |5.3.6 |a| |i||1
Exhaust Lambda reading after 2nd fast idle outside specified limits 1.046 |8.2.1.2 |c||1
Offside Seat belt anchorage prescribed area is excessively corroded at sill |5.2.6|1
Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL HOLED |6.1.B.2|1
Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL HOLED |6.1.B.2|1
Nearside Rear Outer Body component corroded and likely to cause injury sill (6.2.1 (a) (i))1
Nearside Front front brake binding wheel bearing not checked |3.7.B.1|1
Offside Front front brake binding wheel bearing not checked |3.7.B.1|1
Offside Front Anti-roll bar linkage severely distorted broken off |2.4.G.1|1
Offside Rear Seat belt anchorage prescribed area is inadequately repaired lower sill (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired lower sill (7.1.1 (a) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch |6.1.1 |c| |i||1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded and holed (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area is excessively corroded Outer sill at rear |5.2.6|1
Offside Rear Upper Brake disc significantly and obviously worn (1.1.14 (a) (i))1
Offside Rear Hydraulic fluid leaking continuously posing a serious risk to road safety brake caliper (8.4.1 (a) (ii))1
Nearside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2|1
Nearside Front Headlamp aim beam image obviously incorrect NO BEAM PATTERN |1.8.A.1b|1
Offside Front Headlamp aim beam image obviously incorrect NO BEAM PATTERN |1.8.A.1b|1
Nearside Front Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i))1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg in wheel arch (6.1.1 (c) (i))1
Nearside Headlamp adversely affected by the operation of another lamp |1.7.5c|1
Offside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Brake lining|s| wear indicator illuminated handbrake |1.1.13 |a| |i||1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch |6.2.2 |d| |i||1
Service brake excessively binding all brakes |1.2.1 |f||1
Service brake excessively binding handbrake cable lever stuck on |1.2.1 |f||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to floor (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to floor (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength boot floor to wheel well (5.3.6 (a) (i))1
brake disc in such a condition that it is seriously weakened both front brakes discs |3.5.1i|1
Rear Anti-roll bar linkage worn and seriously weakened both rear |2.4.G.1|1
Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement ns and os rear bushes |2.4.G.2|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill heavily corroded with holes |6.1.B.2|1
Nearside Seat belt anchorage prescribed area is excessively corroded Outer sill/wheel arch |5.2.6|1
Offside Rear Braking system leaking to front metal |3.6.A.1|1
Offside Rear Brake pipe leaking to front metal |3.6.A.1|1
Engine MIL inoperative or indicates a malfunction Cylinder missfire code Recommend new spark plugs (8.2.1.2 (h))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Engine compartment (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Chassis rail (5.3.6 (a) (i))1
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f|1
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill area |2.4.A.3|1
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill area/holed and filler repair |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner floor to sill (7.1.1 (a) (i))1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting nearside outer sill by rear jacking point |6.2.2 |d| |i||1
Offside Service brake lagging in operation (1.2.1 (d))1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis affecing subframe and anti roll bar mounting (5.3.6 (a) (ii))1
Offside Front Upper Anti-roll bar attachment bracket/mounting insecure not connected |2.4.G.1|1
Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii))1
Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii))1
Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill to floor (5.3.6 (a) (ii))1
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corrosion (6.2.2 (d) (i))1
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corrosion (6.2.2 (d) (i))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Rear sill (7.1.1 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Rear sill (7.1.1 (a) (i))1
Emissions unable to be completed Exhaust leak (8.2.1.2 (d))1
Front Battery insecure |1.9.1|1
Sub-frame strengthening plate or fastening so insecure that structural rigidity is seriously reduced (6.1.1 (b) (ii))1
Offside Rear Fuel pipe insecure and filter lose (6.1.3 (a) (i))1
Brake cable has restricted free movement |3.5.1k|1
Offside Rear Floor excessively deteriorated |6.2.4 |a| |i||1
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill |6.1.1 |c| |ii||1
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill |6.1.1 |c| |ii||1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg |6.1.1 |c| |ii||1
Rear Body has a sharp edge caused by corrosion both side Sil |6.1.C.1|1
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill and chassis (6.1.1 (c) (i))1
Offside Headlamp not working on dipped beam also side light not working (4.1.1 (a) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis inner arch area to front (5.3.6 (a) (i))1
Exhaust has a major leak of exhaust gases central to rear gasket area (6.1.2 (a))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch area to front (5.3.6 (a) (i))1
Rear fog lamp likely to become detached (4.5.1 (c) (ii))1
Offside Front Outer Anti-roll bar linkage insecurely attached |5.3.3 |a| |i||1
Offside Stop lamp missing |1.2.1a|1
Offside Front Brake hose bulging under pressure |3.6.B.3|1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill corroded and holed (7.1.1 (a) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill corroded and holed (7.1.1 (a) (i))1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill corroded and holed (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill corroded and holed (7.1.1 (a) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SIll/Chassis (6.1.1 (c) (i))1
Offside Rear Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))1
Emissions not tested exhaust sensor damaged (8.2.1.2 (d))1
Central Exhaust has a major leak of exhaust gases at cat |6.1.2 |a||1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced LOWER SILLS (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced LOWER SILL (6.1.1 (c) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL &INNER SILL (6.1.1 (c) (i))1
Seat belt anchorage prescribed area is excessively corroded nearside floor to sill,nearside rear inner sill |5.2.6|1
Offside Front Steering arm deformed (2.1.3 (c) (i))1
Offside Front Outer Tie bar/rod attachment bracket/mounting insecure |2.4.G.1|1
Offside Rear Outer Tie bar/rod rubber mounting deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill holed |6.1.B.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill holed |6.1.B.2|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner & outer sill as marked |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner & outer sills as marked |5.2.6|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis member in wheelarch |2.4.A.3|1
Rear Exhaust has a major leak of exhaust gases Exhaust flange failed/corroded away and leaking |7.1.2|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor (7.1.1 (a) (i))1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor (5.3.6 (a) (i))1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill corroded front to rear (5.3.6 (a) (i))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front outer sill (5.3.6 (a) (i))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill corroded front to rear (5.3.6 (a) (i))1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor area |6.1.B.2|1
Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength both chassis legs/ anti roll bar mountings (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside rear inner and outer sill (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside front inner sill (5.3.6 (a) (i))1
Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i||1
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting hole inside inner arch, within 30cm of strut top. |6.2.2 |d| |i||1
Brake performance not tested coil spring broken, likely to cause damage on RBT. |1.2.1 |g||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill section/floor pan |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill section |5.3.6 |a| |i||1
Nearside Front Wheel insecure |4.2.A.1c|1
Position lamp not working n/s/f sidelight (4.2.1 (a) (ii))1
Nearside Front Subframe mounting prescribed area is excessively corroded underside of chassis leg |2.4.A.3|1
Offside Front Subframe mounting prescribed area is excessively corroded underside of chassis leg |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded underside of chassis leg above anti-roll bar mounting |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded underside of chassis leg above anti-roll bar mounting |2.4.A.3|1
Nearside Front Subframe mounting prescribed area is excessively corroded SILL |2.4.A.3|1
Offside Front Subframe mounting prescribed area is excessively corroded SILL |2.4.A.3|1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded WHEEL ARCH |2.4.A.3|1
Offside Rear Suspension spring mounting prescribed area is excessively corroded WHEEL ARCH |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded ANTI ROLL BAR MOUNTING |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded ANTI ROLL BAR MOUNTING |2.4.A.3|1
Nearside Front Power steering pipe/hose leaking pipes going past radiator (2.1.5 (a))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (upper ) corroded under fuse box (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis / body corroded (5.3.6 (a) (i))1
Offside Rear Anti-roll bar pin or bush excessively worn D bush (5.3.4 (a) (i))1
Nearside Body component insecure outer sill (plastic cover (6.2.1 (a) (i))1
Offside Body component insecure outer sill (plastic cover (6.2.1 (a) (i))1
Rear Exhaust has a major leak of exhaust gases Rear Exhaust (just before rear silencer (6.1.2 (a))1
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill corroded (just infront of rear wheel) (6.1.1 (c) (i))1
Nearside Front Seat belt anchorage prescribed area is excessively corroded sill/lower wing |5.2.6|1
Offside Front Seat belt anchorage prescribed area is excessively corroded sill/lower wing |5.2.6|1
Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both |2.4.G.2|1
Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner and outer sill (6.2.2 (d) (ii))1
Rear Exhaust has a major leak of exhaust gases back box corroded (6.1.2 (a))1
Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced and nearside lower (7.1.1 (a) (i))1
Nearside Front Subframe mounting prescribed area is excessively corroded chassiss |2.4.A.3|1
Offside Front Subframe mounting prescribed area is excessively corroded chassiss |2.4.A.3|1
Nearside Rear Drive shaft bearing likely to break up drive shaft dose not seam to be into diff leaking oil and no movement in the shaft (6.1.7 (b) (ii))1
Nearside Front Upper Suspension arm ball joint likely to become detached ball joint has come out of top arm (5.3.4 (a) (ii))1
Offside Rear Drive shaft bearing likely to break up leaking oil at diff and no movement in shaft (6.1.7 (b) (ii))1
Offside Front Position lamp not working osf side light inop (4.2.1 (a) (ii))1
Nearside Front Suspension component mounting prescribed area is excessively corroded N/S/F chassis |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded O/S/F chassis |2.4.A.3|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor. (7.1.1 (a) (i))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis Leg (6.2.2 (d) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis Leg (6.2.2 (d) (i))1
Offside Rear Lower Anti-roll bar linkage fractured |2.4.G.1|1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering floor to sill |6.1.A.1|1
Nearside Front Seat belt anchorage prescribed area is excessively corroded rear mount |nsr inner sill panel | |5.2.6|1
Offside Front Lower Anti-roll bar corroded and seriously weakened |2.4.G.1|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner floor |5.3.6 |a| |i||1
Nearside Front Suspension arm ball joint likely to become detached |5.3.4 |a| |ii||1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced floor |7.1.1 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both rear inner wheel arches (5.3.6 (a) (i))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor pan/chassis |5.3.6 |a| |i||1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor pan/sill |5.3.6 |a| |i||1
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded sub frame mounting at floor corroded |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded sub frame mounting at floor corroded |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded os rear floor and sill badly corroded |5.2.6|1
Nearside Front Suspension component mounting prescribed area is excessively corroded ns front sub frame mounting corroded |2.4.A.3|1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis outrigger/inner sill/floor |6.1.A.1|1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis outrigger/inner sill/floor |6.1.A.1|1
Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner sills both sides |6.1.A.1|1
Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|1
Offside Front suspension has excessive play in a lower suspension ball joint up lift |2.5.B.1a|1
Nearside Front Suspension component mounting prescribed area is inadequately repaired floor not seam welded all round |2.4.A.3|1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting and offside front suspension top mounts (6.2.2 (d) (i))1
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill within 30cm of suspension mount (6.2.2 (d) (i))1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch and offside wheel arch inner within 30cm of suspension mount (6.2.2 (d) (i))1
Offside Vehicle structure is so deformed it is likely to adversely affect braking or steering chasiss crushed/corroded (6.1.1 (a) (ii))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill to floor (7.1.1 (a) (i))1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill corroded & holed within 30cm of drivers seat/seat belt mounting |6.1.B.2|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis near upper wishbone |2.4.A.3|1
Nearside Rear rear brake recording little or no effort handbrake reading low |3.7.B.5a|1
Nearside Front Anti-roll bar ball joint dust cover missing |2.4.G.2|1
Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill/floor (6.1.1 (c) (ii))1
Emissions NOx sensor obviously defective (8.2.1.1 (a))1
Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|1
Nearside Front Steering arm deformed to the extent that steering is affected (2.1.3 (c) (ii))1
Nearside Front Lower Suspension arm damaged and seriously weakened bent (5.3.3 (b) (i))1
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill has hole in (5.3.6 (a) (i))1
Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis member around antiroll bar location both sides (5.3.6 (a) (i))1
Rear Electrical wiring insecure and connectors likely to become disconnected battery terminal (4.11 (a) (ii))1
Rear Service brake lagging in operation both sides (1.2.1 (d))1
Electrical wiring insecure and connectors likely to become disconnected battery terminal (4.11 (a) (ii))1
Front Outer Integral body structure inadequately repaired such that structural rigidity is significantly reduced front most sill section not welded at seam both sides (6.1.1 (d) (i))1
Nearside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii))1
Offside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner/Outer Sill |6.1.1 |c| |i||1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis wheel arch |6.1.A.1|1
Centre Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings offside |6.1.B.2|1
Exhaust has a major leak of exhaust gases at middle (6.1.2 (a))1
Emissions unable to be completed due to excessive leak (8.2.1.2 (d))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to inner sill holed (6.1.1 (c) (i))1
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced nsf chassis leg |6.1.1 |c| |i||1
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength boot floor (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength boot floor (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength wheel arch (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength wheel arch (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis and floor (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis and floor (5.3.6 (a) (i))1
Nearside Rear Anti-roll bar fractured Broken off the lower socket |2.4.G.1|1
Suspension component mounting prescribed area is excessively corroded Front o/s and n/s anti roll bar mounting areas / chassis legs |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded inner wing has a corroded hole near the top shock-absorber / spring mounting area |2.4.A.3|1
Offside Seat belt anchorage prescribed area is inadequately repaired sill to floor not welded |5.2.6|1
Nearside Rear Anti-roll bar linkage fractured Bottom socket detached |2.4.G.1|1
Nearside Rear Outer Tie bar/rod attachment bracket/mounting insecure |2.4.G.1|1
Vehicle structure has excessive corrosion which adversely affects braking or steering inner and outer chassis leg |6.1.A.1|1
Headlamp aim unable to be tested no patterns (4.1.2 (b))1
Nearside Front Headlamp aim projected beam image is obviously incorrect lens poor (4.1.2 (c))1
Offside Front Headlamp aim projected beam image is obviously incorrect lens poor (4.1.2 (c))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor (7.1.1 (a) (i))1
Inner Front brake disc excessively scored |3.5.1h|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner of outer sill |7.1.1 |a| |i||1
Nearside Front Anti-roll bar linkage ball joint excessively worn drop link (5.3.4 (a) (i))1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis rail (5.3.6 (a) (ii))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Inner sill/floor |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded Inner sill /floor |5.2.6|1
Offside Front Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength Floor corroded |5.3.6 |a| |i||1
Offside Rear Parking brake inoperative on one side Very low reading |1.4.1 |a||1
Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced wing |7.1.1 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill / floor areas |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded inner and outer inner sill areas |5.2.6|1
Seat belt anchorage prescribed area is excessively corroded o/s/r sill back |5.2.6|1
Seat belt anchorage prescribed area is excessively corroded o/s sill to floor |5.2.6|1
Seat belt anchorage prescribed area is excessively corroded o/s sill end |5.2.6|1
Offside Rear Direction indicators not working |1.4.A.2c|1
Nearside Front Headlamp aim beam image too far to the right |1.6.B4|1
Offside Front Headlamp aim beam image too far to the right |1.6.B4|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced chassys +2 |7.1.1 |a| |i||1
Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering chassis corroded full length of car ,heavaly corrodede around front suspension mountings (6.1.1 (c) (ii))1
Offside Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg corodeded very heavely around front suspension mounts (6.1.1 (c) (ii))1
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to inner sill area (6.1.1 (c) (i))1
Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))1
Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))1
Nearside Front Body panel insecure wing (6.2.1 (a) (i))1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wing at strut |6.1.B.2|1
Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Inner wing |6.1.B.2|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2|1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis outrigger |6.1.B.2|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2|1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outrigger |6.1.B.2|1
Offside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Chassis |6.1.B.2|1
Suspension spring mounting prescribed area is excessively corroded both front inner wings |2.4.A.3|1
Seat belt anchorage prescribed area is excessively corroded both sides front floor chassis |5.2.6|1
Seat belt anchorage prescribed area is excessively corroded both sides outer sills |5.2.6|1
Seat belt anchorage prescribed area is excessively corroded both sides inner sills |5.2.6|1
Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing - multiple sections |2.4.A.3|1
Nearside Front Suspension spring mounting prescribed area is excessively corroded chassis section |2.4.A.3|1
Nearside front parking brake recording little or no effort |3.7.B.6a|1
Offside front parking brake recording little or no effort |3.7.B.6a|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill x2 |7.1.1 |a| |i||1
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing/sill |6.1.B.2|1
Nearside Rear Rear position lamp|s| incorrect colour brocken |1.1.A.3e|1
Offside Front Lower Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis box section |6.1.B.2|1
Nearside Front Suspension component mounting prescribed area is excessively corroded above upper suspension arm in 2 different places |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded above upper suspension arm in two different places |2.4.A.3|1
Brake pipe leaking on a hydraulic braking system Front to rear. (1.1.11 (b) (ii))1
Brake performance unable to be tested Due to burst brake pipe. (1.2.1 (g))1
Nearside Front Suspension rod ball joint likely to become detached |5.3.4 |a| |ii||1
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheelarch |6.2.2 |d| |i||1
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheelarch |6.2.2 |d| |i||1
Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i||1
Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i||1
Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch extremely heavily corroded (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch extremely heavily corroded (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear sub-frame mount has hole within 30cm (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill heavily corroded with 30cm of seatbelt mounting (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill under car |5.2.6|1
Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill |2.4.A.3|1
Nearside Front Seat belt anchorage prescribed area is excessively corroded Inner sill |5.2.6|1
Offside Front Seat belt anchorage prescribed area is excessively corroded Inner sill |5.2.6|1
Nearside Front Suspension component mounting prescribed area is excessively corroded Chasis leg |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded Chasis leg |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded wishbone corroded |2.4.A.3|1
Rear Service brake imbalanced across an axle 54% (1.2.1 (b) (i))1
Nearside Front Vehicle structure inadequately repaired such that structural rigidity is significantly reduced Chassis leg (6.1.1 (d) (i))1
Offside Front Vehicle structure inadequately repaired such that structural rigidity is significantly reduced Chassis leg (6.1.1 (d) (i))1
Nearside Rear Suspension arm attachment bracket/mounting insecure Bolt loose (5.3.3 (a) (i))1
Offside Front Suspension arm attachment bracket/mounting insecure Bolt loose (5.3.3 (a) (i))1
Offside Front Inner Subframe mounting prescribed area is excessively corroded Sill |2.4.A.3|1
Nearside Front Inner Subframe mounting prescribed area is excessively corroded Sill + floor area |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength panel behind head lamp (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength panel behind head lamp (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower sill area (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced upper inner arch area (7.1.1 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/floor (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/floor (5.3.6 (a) (i))1
Nearside Front Coil spring fractured or broken Broken (5.3.1 (b) (i))1
Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction Phone mount |3.1 |a| |ii||1
Stop lamp not working o/s/r and n/s/r |1.2.1b|1
Exhaust has a major leak of exhaust gases centre exhaust |7.1.2|1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to anti roll bar mounting |5.3.6 |a| |i||1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill. (6.1.1 (c) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill. (6.1.1 (c) (i))1
Direction indicators adversely affected by the operation of another lamp hazzard warning lamps wont switch off so unable to test indicators |1.4.A.2h|1
Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded wing holed corroded to excess |2.4.A.3|1
Power steering pipe|s| or hose|s| excessively corroded pipe burst and leaking |2.3.2|1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis inner wing subframe mounting area corroded to excess holed |6.1.1 |c| |i||1
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill corroded |5.3.6 |a| |i||1
Nearside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength and outer sill corroded to excess |5.3.6 |a| |i||1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill corroded to excess |5.3.6 |a| |i||1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings holed and corroded |6.1.B.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed and corroded |6.1.B.2|1
Nearside Front Seat belt anchorage prescribed area is excessively corroded floor area x1 |5.2.6|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis box section x1 |2.4.A.3|1
Offside Front Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i||1
Nearside Front Body insecure and dangerous to other road users |6.1.B.1b|1
Offside Front Body insecure and dangerous to other road users |6.1.B.1b|1
Nearside Front Body component likely to become detached wing (6.2.1 (a) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis / rear of subframe. (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage likely to become detached in the event of a collision inner sill detached from outer sill (7.1.1 (a) (ii))1
Brake performance not tested rear nearside brake pipe leaking. (1.2.1 (g))1
Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner wheel arch |2.4.A.3|1
Offside Front Seat belt anchorage prescribed area is excessively corroded Box section |5.2.6|1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected lower chassis rail by roll bar mount (5.3.6 (a) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower chassis rail (5.3.6 (a) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corroded hole to osf chassis leg (6.1.1 (c) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength on inner sill (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength on inner sill (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength on inner sill (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced in wheel arch (7.1.1 (a) (i))1
Exhaust has a major leak of exhaust gases rear box (6.1.2 (a))1
Front Windscreen in such a condition that visibility through swept area is seriously affected (3.2 (c) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sill. |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill. |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sill. |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sill. |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch. |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch. |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wheel arch x 2 (5.3.6 (a) (ii))1
Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))1
Nearside Rear Brake inadequately mounted Flexi Brake Hose (1.1.21 (c))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Suspension top / inner wing 3 spots (5.3.6 (a) (i))1
Nearside Body component damaged and likely to cause injury mirror unit (6.2.1 (a) (i))1
Rear Anti-roll bar linkage ball joint likely to become detached both insecure (5.3.4 (a) (ii))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both outer sills (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing under wing (5.3.6 (a) (i))1
Suspension component mounting prescribed area is excessively corroded both outer sills at rear |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded sill back |2.4.A.3|1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner body/arch under bonnet |6.1.1 |c| |i||1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis suspension prescribed area |6.1.1 |c| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis suspension prescribed area |6.1.1 |c| |i||1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor to sill |6.1.1 |c| |i||1
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch/sill stopend |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing to chassis |2.4.A.3|1
Nearside Rear Upper Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6|1
Offside Rear Upper Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded floorpan |5.2.6|1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor |6.2.2 |d| |i||1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor |6.2.2 |d| |i||1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced leg |6.1.1 |c| |i||1
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch |6.2.2 |d| |i||1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed |6.1.1 |c| |i||1
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed |6.1.1 |c| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near strut top |5.3.6 |a| |i||1
Offside Rear Seat belt anchorage prescribed area is excessively corroded on sill |5.2.6|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing under bonnet |6.1.B.2|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing |6.1.1 |c| |i||1
Offside Front Anti-roll bar linkage missing drop link |5.3.3 |a| |ii||1
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||1
Offside Rear Tie bar/rod ball joint dust cover insecure so that it no longer prevents the ingress of dirt drop link |2.4.G.2|1
Offside Rear Body panel corroded and likely to cause injury outerarch sharp edge (6.2.1 (a) (i))1
Emissions not tested due to exessive exh blow (8.2.1.2 (d))1
Front Power steering component leaking steering rack (2.1.5 (a))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by front crossmember (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner flitch (5.3.6 (a) (i))1
Nearside Front Tie bar/rod ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt drop-link |2.4.G.2|1
Nearside Rear Tie bar/rod ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt drop-link |2.4.G.2|1
Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hole in sill |6.1.B.2|1
Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower sill |6.1.B.2|1
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower sill |6.1.B.2|1
Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower sill |6.1.B.2|1
Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower sill |6.1.B.2|1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wheel arch |6.1.B.2|1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner wheel arch |6.1.B.2|1
Offside Front Suspension arm has excessive play in a ball joint Lower ball joint excessive play |2.4.G.2|1
Nearside Front Suspension arm has excessive play in a ball joint Lower ball joint excessive play |2.4.G.2|1
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt Dust cover split |2.4.G.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis rail has excessive corrosion |6.1.B.2|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Both side sills have excessive corrosion front and rear. Nearside front and Offside rear have collapsed |6.1.B.2|1
Emissions not tested Exhaust emissions not tested due to Engine management light illuminated and vehicle not idling correctly |7.3.A.1|1
Nearside Rear Exhaust has a major leak of exhaust gases flange rotted |6.1.2 |a||1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch to chassis area |6.1.1 |c| |i||1
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch to chassis area |6.1.1 |c| |i||1
Body component corroded and likely to cause injury o/s and n/s sills (6.2.1 (a) (i))1
Central Exhaust has a major leak of exhaust gases pipe and silencer (6.1.2 (a))1
Nearside Front Suspension arm ball joint likely to become detached upper suspension arm ball joint bolt is loose and split pin missing. (5.3.4 (a) (ii))1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wing at anti-roll bar mounting (6.1.1 (c) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor area (6.2.2 (d) (i))1
Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed from front to back (6.2.2 (d) (i))1
Nearside Front Anti-roll bar linkage ball joint likely to become detached has become detached. (5.3.4 (a) (ii))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg at floor. (6.1.1 (c) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at top suspension arm mounting point. (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg at floor. (6.1.1 (c) (i))1
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded floor to sill section |5.2.6|1
Nearside Front Suspension component mounting prescribed area is excessively corroded above anti roll bar mounting |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded above anti roll bar mounting |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis at rear of suspension mounting |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded at rear of front suspension mountings |2.4.A.3|1
Nearside Rear Subframe mounting prescribed area is excessively corroded floor /chassis |2.4.A.3|1
Offside Rear Subframe mounting prescribed area is excessively corroded floor /chassis |2.4.A.3|1
Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill too floor |5.2.6|1
Nearside Seat belt anchorage prescribed area is excessively corroded floorpan |5.2.6|1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting near battery (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor area |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor area |5.3.6 |a| |i||1
Floor excessively deteriorated (6.2.4 (a) (i))1
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer cills holed (6.1.1 (c) (i))1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer cills holed (6.1.1 (c) (i))1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings as indicated |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings as indicated |6.1.B.2|1
Nearside Rear Suspension arm damaged and seriously weakened |2.4.G.1|1
Offside Rear Suspension arm damaged and seriously weakened |2.4.G.1|1
Offside Front Suspension arm damaged and seriously weakened |2.4.G.1|1
Offside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced arch inner sill (6.1.1 (d) (i))1
Offside Rear Battery insecure and likely to fall from carrier corroded under battery (4.13 (a) (ii))1
Nearside Front Body mounting fixings missing such that stability is seriously impaired (6.2.2 (c) (ii))1
Central Front Headlamp light intensity severely reduced (4.1.4 (a))1
Offside Front Body mounting fixings missing such that stability is seriously impaired inner wing corroded (6.2.2 (c) (ii))1
Outer Stop lamp|s| not working Both sides |4.3.1 |a| |ii||1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis under bonnet |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis under car |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheelarch |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheelarch |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheelarch |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded inner wheelarch |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded suspension arm |2.4.A.3|1
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))1
Nearside Rear Body panel likely to become detached boot floor (6.2.1 (a) (ii))1
Offside Rear Body panel likely to become detached boot floor (6.2.1 (a) (ii))1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sills (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area is inadequately repaired outer sills (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected inner wheel arch (5.3.6 (a) (ii))1
Offside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected inner wheel arch (5.3.6 (a) (ii))1
Nearside Front Steering component mounting prescribed area is excessively corroded engine bay / p/s reservoir (2.1.2 (e) (i))1
Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2|1
Offside Seat belt anchorage prescribed area is excessively corroded sill holed by corrosion in 2 areas |5.2.6|1
brake disc inappropriately repaired both rear discs incorrect diameter, too small |3.5.1n|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded BODYSILL |5.2.6|1
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing area |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill/wheel arch area |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is inadequately repaired sill area |2.4.A.3|1
Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2|1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside rear outer sill |5.3.6 |a| |i||1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside rear outer sill |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area is excessively corroded floor chassis |2.4.A.3|1
Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength near strut top mounting (5.3.6 (a) (i))1
Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength near strut mounting (5.3.6 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chassis leg under rail cover (7.1.1 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner lower wheel arch (5.3.6 (a) (i))1
Braking system leaking Front to rear brake pipe leak |3.6.A.1|1
Offside Rear Boot lid component corroded and likely to cause injury |6.2.1 |a| |i||1
Nearside Rear Boot lid component corroded and likely to cause injury |6.2.1 |a| |i||1
Nearside Headlamp aim so that beam "kick up" is not visible on the screen no pattern |4.1.2 |a||1
Nearside Rear Suspension component mounting prescribed area is excessively corroded rear side heavy corroeded |2.4.A.3|1
Suspension component mounting prescribed area is excessively corroded Front and Rear side heavy corroeded |2.4.A.3|1
Nearside Front Front position lamp|s| not working side light not working |1.1.A.3b|1
Nearside Front Lower Anti-roll bar synthetic mounting deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill |6.2.2 |d| |i||1
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill |6.2.2 |d| |i||1
Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis marked yellow |5.3.6 |a| |i||1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill and wheel arch |5.2.6|1
Offside Rear Braking system leaking At union and caliper |3.6.A.1|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer and inner sill/floorpan |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Boot wheel well |6.1.B.2|1
Nearside Rear Exhaust has a major leak of exhaust gases Silencer to pipe joint |7.1.2|1
Brake disc significantly and obviously worn both rear (1.1.14 (a) (i))1
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3|1
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|1
Rear Lower Suspension arm corroded and seriously weakened both |2.4.G.1|1
Rear Anti-roll bar has excessive play in a ball joint both |2.4.G.2|1
Nearside Rear Anti-roll bar insecurely attached d bush clamp mounting stud broken (5.3.3 (a) (i))1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing and inner leg member (6.2.2 (d) (i))1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing and inner leg member (6.2.2 (d) (i))1
Rear Brake pipe at imminent risk of failure or fracture between flexis (1.1.11 (a))1
Nearside Front Suspension component attachment bracket/mounting corroded and seriously weakened chassis rail |5.3.3 |b| |i||1
Offside Front Suspension component attachment bracket/mounting corroded and seriously weakened chassis rail |5.3.3 |b| |i||1
Seat belt anchorage prescribed area is excessively corroded N/S/R outer sill |5.2.6|1
Nearside Front Anti-roll bar linkage insecure drop link |2.4.G.1|1
Vehicle structure has excessive corrosion which adversely affects braking or steering N/S/F / O/S/F and N/S/R (6.1.1 (c) (ii))1
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Under wheel arch front (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Sill (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Sill (5.3.6 (a) (i))1
Nearside Front Inner Anti-roll bar attachment bracket/mounting corroded and seriously weakened arch area and underside of chassis leg (5.3.3 (b) (i))1
Offside Front Inner Anti-roll bar attachment bracket/mounting corroded and seriously weakened arch area and underside of chassis leg (5.3.3 (b) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/chassis (5.3.6 (a) (i))1
Nearside Front Anti-roll bar linkage insecure and impairing directional stability drop link broken (5.3.3 (a) (ii))1
Front Service brake imbalanced across an axle 42% |1.2.1 |b| |i||1
Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill panel corroded (6.2.2 (d) (ii))1
Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill panel corroded (6.2.2 (d) (ii))1
Offside Front Anti-roll bar attachment bracket/mounting likely to become detached chassis holed and corroded at anti roll bar mount (5.3.3 (a) (ii))1
Nearside Front Anti-roll bar attachment bracket/mounting likely to become detached chassis holed and corroded at anti roll bar mount (5.3.3 (a) (ii))1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed and corroded (7.1.1 (a) (i))1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed and corroded (7.1.1 (a) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed and corroded (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed and corroded (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill, centre of vehicle (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill inner sill |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill inner sill floor |5.3.6 |a| |i||1
Offside Seat belt anchorage prescribed area is excessively corroded inner sill corrosion holes within 30 cm of seat belt anchorage |5.2.6|1
Nearside Seat belt anchorage prescribed area is excessively corroded inner sill coorosion hole within 30 cm of seat belt anchorage |5.2.6|1
Nearside Front Coil spring mounting corroded and seriously weakened |2.4.C.3c|1
Nearside Front Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1|1
Offside Rear Radius arm corroded and seriously weakened inner sill holed |2.4.G.1|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis at anti roll bar mounting |6.1.1 |c| |i||1
Inner Rear Brake lining|s| less than 1.5 mm thick |3.5.1g|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg area |2.4.A.3|1
Rear Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Exhaust has a major leak of exhaust gases centre |7.1.2|1
Nearside Front Steering component mounting prescribed area is excessively corroded chassis leg |2.2.C.1h|1
Offside Front Steering component mounting prescribed area is excessively corroded chassis leg |2.2.C.1h|1
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` sat nav/phone holder |8.3.1b|1
Offside Rear Outer Suspension component mounting prescribed area is inadequately repaired wheel arch to sill insecure (5.3.6 (a) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing (6.1.1 (c) (i))1
Rear Sub-frame attachment bracket/mounting insecure (5.3.3 (a) (i))1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner & Outer sill area (6.1.1 (c) (i))1
Offside Rear Road wheel fixing loose (5.2.1 (a) (i))1
Nearside Front front brake binding 30kg |3.7.B.1|1
Offside Lower Seat belt anchorage prescribed area is excessively corroded rear end of sill |outer| |5.2.6|1
Offside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Offside Rear Upper Suspension arm attachment bracket/mounting nut missing |2.4.G.1|1
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))1
Offside Front Inner Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6|1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill/floor (6.1.1 (c) (i))1
Offside Front Anti-roll bar linkage fractured drop link |2.4.G.1|1
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering undersill |6.1.A.1|1
Offside Rear Parking brake inoperative on one side low effort |62kg| |1.4.1 |a||1
Nearside Rear Anti-roll bar linkage insecurely attached |5.3.3 |a| |i||1
Steering wheel has excessive movement up and down |2.2.2 |a||1
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL AND IMPROPERLY REPAIRED (6.1.1 (c) (i))1
Offside Front Position lamp not working sidelight |4.2.1 |a||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg, inside arch |6.1.1 |c| |i||1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg, inside arch |6.1.1 |c| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Strut tops (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail next to anti roll bar mounting (5.3.6 (a) (i))1
Front Power steering pipe/hose leaking |2.1.5 |a||1
Nearside Front Front position lamp|s| has a product on the light source so it is not visible from a reasonable distance |1.1.A.3d|1
Nearside Front Track rod end ball joint dust cover missing |2.2.C.1c|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner/sill |7.1.1 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner/sill |7.1.1 |a| |i||1
Front Brake lining(s) incorrectly mounted (1.1.13 (c))1
Nearside Front Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Inner arch (6.2.2 (d) (ii))1
Offside Front Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Inner arch (6.2.2 (d) (ii))1
Nearside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength chassis rail |2.4.A.3|1
Anti-roll bar linkage insecure broken |2.4.G.1|1
Central Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))1
Offside Rear Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))1
Central Exhaust has a major leak of exhaust gases middle pipe after box has a blow (6.1.2 (a))1
Rear Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis @antiroll bar mounting (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis @antiroll bar mounting (5.3.6 (a) (i))1
Anti-roll bar attachment bracket/mounting insecure bolt missing o/s/f (5.3.3 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area is excessively corroded chassis leg above anti roll bar mount |2.4.A.3|1
Nearside Front Lower Suspension component mounting prescribed area is excessively corroded chassis above anti roll bar mount |2.4.A.3|1
Fluid leaking continuously posing a serious risk to road safety brake fluid |8.4.1 |a| |ii||1
Nearside Inner Seat belt anchorage prescribed area is inadequately repaired inner sill (7.1.1 (a) (i))1
Nearside Front Lower Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))1
Offside Front Lower Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))1
Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced complete sill (6.1.1 (c) (i))1
Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced complete sill (6.1.1 (c) (i))1
Electronic stability control switch not functioning correctly |7.12 |d||1
Nearside Front Suspension arm ball joint excessively worn |5.3.4 |a| |i||1
Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2|1
Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill area (5.3.6 (a) (i))1
Front Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))1
Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg |6.1.1 |c| |i||1
Offside Front Anti-roll bar linkage has excessive play in a ball joint anti roll bar link |2.4.G.2|1
Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt split (2.1.3 (g) (ii))1
Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))1
Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i||1
Nearside Front Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced (6.1.1 (b) (ii))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch holed (6.2.2 (d) (i))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cill (6.2.2 (d) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cill (6.2.2 (d) (i))1
Nearside Front Body panel likely to become detached wing (6.2.1 (a) (ii))1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor and sill |6.1.1 |c| |i||1
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor and sill |6.1.1 |c| |i||1
Nearside Body component corroded and likely to cause injury |6.2.1 |a| |i||1
Undertray insecure |8.1.1 |b| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by anti roll bar mounting area. (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by anti roll bar mounting area. (5.3.6 (a) (i))1
brake disc in such a condition that it is seriously weakened nsf/osf/nsr/osr |3.5.1i|1
Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Sill|Marked in YELLOW|. |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill|Marked in YELLOW|. |6.1.B.2|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |Marked in YELLOW|. |6.1.B.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |Marked in YELLOW|. |6.1.B.2|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor|Marked in YELLOW|. |6.1.B.2|1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and sill end (5.3.6 (a) (i))1
Front Exhaust has a major leak of exhaust gases cat |7.1.2|1
Central Exhaust has a major leak of exhaust gases join to backbox |7.1.2|1
Emissions not tested due to exhaust leaks |7.3.A.1|1
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis leg |5.3.6 |a| |i||1
Offside Seat belt anchorage prescribed area is excessively corroded lower sill inner and outer |5.2.6|1
Nearside Seat belt anchorage prescribed area is excessively corroded inner and outer lower sill |5.2.6|1
Rear Brake pipe excessively damaged across axle |1.1.11 |c||1
Front Lower Power steering pipe/hose excessively corroded |2.1.5 |g| |i||1
Nearside Front Inner Integral body structure has excessive corrosion which adversely affects braking or steering sill (6.1.1 (c) (ii))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill end (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sill (7.1.1 (a) (i))1
Offside Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings outer sill badly corroded |6.1.B.2|1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner back up sill |6.2.2 |d| |i||1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner back up sill |6.2.2 |d| |i||1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor chasis rail before bulk head holed |6.1.1 |c| |i||1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill severely coroded |6.2.2 |d| |i||1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Corrosion of sill |6.1.1 |c| |i||1
Nearside Stop lamp(s) lens defective such that the emitted light is adversely affected (4.3.1 (b) (ii))1
Lower Fluid leak harmful to the environment or a risk to other road users coolant radiator hose (8.4.1 (a) (i))1
Offside Rear Anti-roll bar linkage insecurely attached fitted incorrectly (5.3.3 (a) (i))1
Offside Front Upper Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch multiple holes |7.1.1 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch |7.1.1 |a| |i||1
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i||1
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i||1
Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i||1
Offside Rear Braking system leaking Calliper |3.6.A.1|1
Nearside Front Anti-roll bar linkage worn and seriously weakened Lower joint |2.4.G.1|1
Offside Rear Outer Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii))1
Offside Rear Outer Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheelarch (7.1.1 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/floorpan (5.3.6 (a) (i))1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/floorpan (5.3.6 (a) (i))1
Offside rear brake recording little or no effort handbrake |3.7.B.5a|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill and floor beside seat |6.1.B.2|1
Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sill and floor beside seat |6.1.B.2|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded chassis and floor |5.2.6|1
Front Suspension component mounting prescribed area is excessively corroded in inner wings both sides |2.4.A.3|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (marked yellow) (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (marked Yellow) (5.3.6 (a) (i))1
Nearside Front Suspension arm ball joint likely to become detached bolt / nut (5.3.4 (a) (ii))1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis rail (5.3.6 (a) (ii))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan (7.1.1 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan (7.1.1 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill to floor, all along |7.1.1 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill to floor, all along |7.1.1 |a| |i||1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis anti roll bar mounting |5.3.6 |a| |ii||1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis anti roll bar mounting |5.3.6 |a| |ii||1
Offside Anti-roll bar has excessive play in a ball joint |2.4.G.2|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill to floor |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill to floor |6.1.B.2|1
Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Outer sill. (5.3.6 (a) (i))1
Offside Rear Hydraulic fluid leaking excessively caliper |8.4.1 |a| |i||1
Nearside Rear Body has a sharp edge caused by corrosion wheel arch/rear quarter |6.1.C.1|1
Offside Rear Body has a sharp edge caused by corrosion wheel arch/rear quarter |6.1.C.1|1
Offside Front Suspension component mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3|1
Nearside Rear Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt drop link |2.4.G.2|1
Offside Rear Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt drop link |2.4.G.2|1
Offside Front Intermediate drop arm fractured and unserviceable |2.2.C.1d|1
All direction indicators not working all (4.4.1 (a) (ii))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor area (7.1.1 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail |5.3.6 |a| |i||1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/floor (5.3.6 (a) (i))1
Front coil spring fractured |2.4.C.1a|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chasis leg |2.4.A.3|1
Offside Rear Lower Suspension arm worn and seriously weakened |2.4.G.1|1
Nearside Front Suspension component mounting prescribed area is excessively corroded of floor to inner sill |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded of floor to inner sill |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded of outer sill |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded of outer sill |5.2.6|1
Nearside Front Subframe mounting prescribed area is excessively corroded chassis leg |2.4.A.3|1
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))1
Nearside Rear Hydraulic brake calliper damaged and braking performance affected or possible cable (1.1.16 (a) (ii))1
Nearside Front Suspension component mounting prescribed area is excessively corroded under bonnet |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded under bonnet |2.4.A.3|1
Front Steering rack gaiter split |2.2.D.2d|1
Offside Front Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance requires new bulb |1.1.A.3d|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill badly corroded |7.1.1 |a| |i||1
Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill, marked in yellow (6.1.1 (c) (i))1
Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill, marked in yellow (6.1.1 (c) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch, marked in yellow (5.3.6 (a) (i))1
Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill, marked with chalk |6.1.1 |c| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor, marked with chalk |5.3.6 |a| |i||1
Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Strut top, marked with chalk (5.3.6 (a) (i))1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill, marked with chalk |6.1.1 |c| |i||1
Nearside Rear Lower Seat belt anchorage likely to become detached in the event of a collision sill |7.1.1 |a| |ii||1
Offside Front Lower Seat belt anchorage likely to become detached in the event of a collision sill |7.1.1 |a| |ii||1
Exhaust silencer likely to become detached rear bolts corroded and breaking away (8.1.1 (b) (ii))1
Parking brake inoperative on one side Effort at both rear wheels very low (1.4.1 (a))1
Nearside Power steering component leaking rack (2.1.5 (a))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Behind headlight, within 30cm of strut mounting. (5.3.6 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail, within 30cm of subframe mounting (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail, within 30cm of subframe mounting (5.3.6 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor pan, within 30cm of subframe mounting (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor pan, within 30cm of subframe mounting (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Strut top area (5.3.6 (a) (i))1
Offside Front Steering locking device missing Track rod end split pin missing (2.1.3 (d))1
Electrical wiring insecure and connectors likely to become disconnected Battery terminals loose (4.11 (a) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Numerous holes around strut top (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Numerous holes around strut top (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Hole in outer sill (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Holes in OSF and OSR inner sill (7.1.1 (a) (i))1
Nearside Rear Anti-roll bar linkage ball joint likely to become detached Ball joint separated (5.3.4 (a) (ii))1
Offside Front Steering locking device missing No split pin installed on Track rod end nut (2.1.3 (d))1
Offside Front Anti-roll bar linkage has excessive play in a ball joint balljoint broken |2.4.G.2|1
Anti-roll bar linkage insecure |2.4.G.1|1
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded SILL |2.4.A.3|1
Offside Front Anti-roll bar has excessive play in a pin/bush Insecure |2.4.G.2|1
Rear fog lamp does not emit a steady red light |1.3.2e|1
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt Both upper and lower dust covers (5.3.4 (b) (ii))1
Exhaust Lambda reading after 2nd fast idle outside specified limits reading 1.132 (8.2.1.2 (c))1
Nearside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Suspension mounting area (6.1.1 (c) (i))1
Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Suspension mounting area (6.1.1 (c) (i))1
Offside Outer Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Offside Suspension component mounting prescribed area is excessively corroded front chassis leg |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded floor and sill |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded floor and sill |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded floor under sill |5.2.6|1
Nearside Front Upper Suspension arm locating pin locking device missing split pin missing |2.4.G.3b|1
Nearside Front Lower Suspension arm locating pin locking device missing split pin missing |2.4.G.3b|1
Front Upper Suspension component mounting prescribed area is excessively corroded inner wheel arch areas both sides |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mounting point |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i))1
Offside Rear Brake pipe kinked |3.6.B.2b|1
Brake performance not tested not tested due to leaking brake caliper and no reserve travel on foot brake |3.7.A.1|1
Nearside Front Subframe mounting prescribed area is excessively corroded chassis leg area |2.4.A.3|1
Offside Front Position lamp not working dip beam (4.2.1 (a) (ii))1
Offside Rear Inner Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength sill |2.4.A.3|1
Seat belt anchorage prescribed area strength or continuity significantly reduced Both rear outer sills (7.1.1 (a) (i))1
Offside Position lamp not working 501 |4.2.1 |a||1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s front chassis at antiroll mounting (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s front chassis holed at antiroll mount (5.3.6 (a) (i))1
Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering within 30cm of anti roll bar mounting (6.1.1 (c) (ii))1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering within 30 cm of anti roll bar mounting (6.1.1 (c) (ii))1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL CORRODED THROUGH (7.1.1 (a) (i))1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL CORRODED THROUGH (7.1.1 (a) (i))1
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i))1
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i))1
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded sil |5.2.6|1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sil |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by strut mount |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis corroded (5.3.6 (a) (i))1
Nearside Rear Upper Suspension arm pin or bush excessively worn outer bush bonding deteriorated allowing suspension arm and hub metal to metal contact (5.3.4 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis close to suspension arm mounting |2.4.A.3|1
Headlamp aim projected beam image is obviously incorrect ns and os (4.1.2 (c))1
Headlamp light source and lamp not compatible ns and os hid light and side lights fitted (4.1.4 (c))1
Nearside Front Track rod end ball joint dust cover missing (2.1.3 (g) (ii))1
Offside Rear Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))1
Offside Front Steering locking device missing no split pin in track rod end (2.1.3 (d))1
Offside Front Lower Steering locking device missing arm ball joint (2.1.3 (d))1
Nearside Front Lower Steering locking device missing arm ball joint (2.1.3 (d))1
Exhaust has a major leak of exhaust gases front area blowing |7.1.2|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area holed |6.1.B.2|1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area holed |6.1.B.2|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch chasis rail area holed |6.1.B.2|1
Nearside Front Anti-roll bar attachment bracket/mounting likely to fail broken bolt (5.3.3 (b) (ii))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis (6.2.2 (d) (i))1
Offside Rear Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength arch (5.3.6 (a) (i))1
Central Front Bumper damaged and likely to cause injury when grazed or contacted number plate holder (6.1.4 (a) (i))1
Nearside Rear Brake slack adjuster incorrectly adjusted (1.1.18 (a))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced small area |6.1.1 |c| |i||1
Exhaust emissions likely to be affected by an exhaust leak rear (8.2.1.1 (b))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (inner arch) (6.1.1 (c) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner arch (6.2.2 (d) (i))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner arch (6.2.2 (d) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail side and bottom |5.3.6 |a| |i||1
Offside Brake cable has restricted free movement (1.1.15 (e))1
Offside Rear rear brake recording little or no effort HAND BRAKE |3.7.B.5a|1
Front Exhaust emissions exceed manufacturers specified limit co to high (8.2.2.2 (a))1
Steering locking device missing |2.2.C.1g|1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill area (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor/inner sill |5.2.6|1
Emissions unable to be completed exhaust blow (8.2.1.2 (d))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer door sill |5.2.6|1
Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Wheel arch (6.2.2 (d) (i))1
Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Wheel arch (6.2.2 (d) (i))1
Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Outer sill (6.2.2 (d) (i))1
Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Inner sill (6.2.2 (d) (i))1
Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Outer sill (6.2.2 (d) (i))1
Nearside Side repeater not working Fallen in wing (4.4.1 (a) (ii))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor hole (6.1.1 (c) (i))1
Nearside Front Position lamp has a product on the lens or light source which shows white light to the rear (4.2.3 (b) (ii))1
Offside Rear brake caliper securing device missing |3.5.1j|1
Offside Front Anti-roll bar attachment bracket/mounting bolt missing bolt broken. |2.4.G.1|1
Offside Outer Front Lower Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch (5.3.6 (a) (i))1
Nearside Front Lower Suspension arm corroded and seriously weakened shock mount (5.3.3 (b) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch / chassis (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch / chassis (5.3.6 (a) (i))1
Nearside Rear Lower Suspension component mounting prescribed area is inadequately repaired Outer sill patch repair NOT continuously welded around edges (5.3.6 (a) (i))1
Offside Rear Lower Suspension component mounting prescribed area is inadequately repaired Outer sill patch repair NOT continuously welded around edges (5.3.6 (a) (i))1
Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear seal marked yellow (5.3.6 (a) (i))1
Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear seal marked yellow (5.3.6 (a) (i))1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner arch area as marked (6.1.1 (c) (ii))1
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill as marked (6.1.1 (c) (ii))1
Parking brake inoperative on one side both rears low readings (1.4.1 (a))1
Exhaust has a major leak of exhaust gases CENTRE AND REAR SECTIONS REQUIRED - ROTTEN AT JOINT (6.1.2 (a))1
Central Stop lamp(s) not working HIGH LEVEL (4.3.1 (a) (ii))1
Service brake is causing the vehicle to swerve to the offside FRONT BRAKES BINDING (1.2.1 (b) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor holed (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor holed (6.1.1 (c) (i))1
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill riser (6.1.1 (c) (i))1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill riser (6.1.1 (c) (i))1
Offside Rear Floor excessively deteriorated boot floor holed (6.2.4 (a) (i))1
Rear Exhaust has a major leak of exhaust gases corroded away on joint |7.1.2|1
Nearside Direction indicator flashing more than 120 times a minute |1.4.A.2g|1
Exhaust has a major leak of exhaust gases centre to rear flange |6.1.2 |a||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength corroded away/hole in engine |5.3.6 |a| |i||1
Anti-lock braking system obviously removed all wiring cut from wheel speed sensors (1.6 (f))1
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch has rust hole (6.2.2 (d) (i))1
Offside Seat belt anchorage prescribed area is inadequately repaired outer sill at rear insecure (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill to floor (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill return |5.2.6|1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner/undersill (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner/undersill (7.1.1 (a) (i))1
Emissions unable to be completed not running correctly and 2nd lambda removed from exhaust (8.2.1.2 (d))1
Emissions oxygen sensor missing where one was fitted as standard 2nd lambda not fitted to exhaust (8.2.1.1 (a))1
Nearside Front Subframe mounting prescribed area is inadequately repaired Chassis |2.4.A.3|1
Offside Front Subframe mounting prescribed area is inadequately repaired Chassis |2.4.A.3|1
Rear Exhaust has a major leak of exhaust gases tail pipe to middle pipe (6.1.2 (a))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Wheel Arch (6.1.1 (c) (i))1
Offside Rear Upper Suspension arm has excessive play in a pin/bush |2.4.G.2|1
Nearside Front Suspension spring mounting prescribed area is excessively corroded behind head lamp |2.4.A.3|1
Offside Rear Outer Suspension arm attachment bracket/mounting insecure not fully tight . |2.4.G.1|1
Nearside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mount area |2.4.A.3|1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner and outer sill |marked in yellow| |6.1.B.2|1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner and outer sill |marked in yellow| |6.1.B.2|1
Nearside Front Headlamp aim projected beam image is obviously incorrect HID BULBS FITTED (4.1.2 (c))1
Offside Front Headlamp aim projected beam image is obviously incorrect HID BULBS FITTED (4.1.2 (c))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced OUTER SILL HOLED (6.1.1 (c) (i))1
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL HOLED (6.1.1 (c) (i))1
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced WING HOLED (6.1.1 (c) (i))1
Front Position lamp not working on both sides (4.2.1 (a) (ii))1
Front Headlamp aim projected beam image is obviously incorrect Both sides (4.1.2 (c))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor / inner sill area (7.1.1 (a) (i))1
Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel-arch / sill area (7.1.1 (a) (i))1
Front Headlamps matched pair are not the same colour |1.7.6|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg inner arch (5.3.6 (a) (i))1
Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i||1
Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i||1
Front Anti-roll bar linkage insecure |2.4.G.1|1
Nearside Vehicle structure is deformed and structural rigidity is significantly reduced marked yellow (6.1.1 (a) (i))1
Offside Vehicle structure is deformed and structural rigidity is significantly reduced marked yellow (6.1.1 (a) (i))1
Emissions not tested due to lambda reading high and major exhaust leak (8.2.1.2 (d))1
Anti-roll bar linkage has excessive play in a ball joint both fronts |2.4.G.2|1
brake disc in such a condition that it is seriously weakened both rears outer sides pitted/worn |3.5.1i|1
Nearside Front Floor excessively deteriorated hoie in floor |6.2.4 |a| |i||1
Nearside Front Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii||1
Offside Front Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii||1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))1
Brake performance not tested due to leaking O/S/R brake caliper (1.2.1 (g))1
Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer |5.2.6|1
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits to high |8.2.1.2 |b||1
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits to high |8.2.1.2 |b||1
Exhaust Lambda reading after 2nd fast idle outside specified limits to low |8.2.1.2 |c||1
Offside Front Suspension component mounting prescribed area is inadequately repaired chassis leg above anti-roll bar mounting holed and corroded and disguised with silicone (5.3.6 (a) (i))1
Nearside Rear Sub-frame attachment bracket/mounting insecure bolt missing (5.3.3 (a) (i))1
Rear Suspension component insecurely attached retaining bolt missing holding the diff to the mounting frame (5.3.3 (a) (i))1
Offside Rear Suspension component mounting prescribed area is inadequately repaired inner and outer sill panels (5.3.6 (a) (i))1
Nearside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))1
Offside Body component damaged and likely to cause injury mirror (6.2.1 (a) (i))1
Central Exhaust has a major leak of exhaust gases just after cat leaking from gasket (6.1.2 (a))1
Brake performance not tested due to low pads (1.2.1 (g))1
Nearside Rear Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt link arm |2.4.G.2|1
Nearside Rear Lower Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))1
Offside Subframe mounting prescribed area is excessively corroded outer sill |2.4.A.3|1
Offside Front Anti-roll bar linkage ball joint likely to become detached snapped |5.3.4 |a| |ii||1
Offside Rear Suspension arm likely to become detached |5.3.3 |a| |ii||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced OUT RIGGER/INNER SILL (6.1.1 (c) (i))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill/wing (5.3.6 (a) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced where the o/s/f wing bolts to the body within 30cm of jacking point. has corroded thin and deflects when pressed. severely weakened. |6.1.1 |c| |i||1
Nearside Rear Anti-roll bar linkage has an unsafe modification fitted incorrectly |5.3.3 |c| |i||1
Offside Rear Anti-roll bar linkage has an unsafe modification fitted incorrectly |5.3.3 |c| |i||1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed |6.1.1 |c| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed |6.1.1 |c| |i||1
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Offside Rear Tie bar/rod locating pin insecure Drop-link severed |2.4.G.3a|1
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired inner sill /arch (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area is inadequately repaired inner sill central (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area is inadequately repaired floor/ arch (5.3.6 (a) (i))1
Front Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction sun strip (3.1 (a) (ii))1
Nearside Front Integral body structure is fractured and structural rigidity is significantly reduced jacking point to floor |6.1.1 |a| |i||1
Offside Front Lower Coil spring fractured or broken |5.3.1 |b| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i))1
Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced innersill (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer/inner sills/floor pan (7.1.1 (a) (i))1
Offside Rear Sub-frame fractured |2.4.G.1|1
Power steering pipe|s| or hose|s| inappropriately repaired |2.3.7|1
Offside Seat belt anchorage prescribed area is inadequately repaired Fibreglass |5.2.6|1
Front Valve stem seriously damaged Both |4.1.D.1e|1
Headlamp light source and lamp not compatible both headlamps dip/main beams led conversions fitted (4.1.4 (c))1
Nearside Direction indicator not working (4.4.1 (a) (ii))1
Fuel cap/sealing device component leaking (6.1.3 (b) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis beam (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis beam (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front chassis leg (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill ( rear end ) (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill ( rear end ) (7.1.1 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s/r & o/s/r inner wheel arch (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wing (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wing (7.1.1 (a) (i))1
Nearside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii))1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor and sill area (6.1.1 (c) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced underside sill (7.1.1 (a) (i))1
Offside Front Suspension arm insecure |2.4.G.1|1
Nearside Suspension component mounting prescribed area is excessively corroded inner sill area |2.4.A.3|1
Offside Suspension component mounting prescribed area is excessively corroded inner sill area |2.4.A.3|1
Nearside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.1 |c| |ii||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength antiroll bar mounting bracket mounting area (5.3.6 (a) (i))1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis (6.1.1 (c) (ii))1
Suspension component mounting prescribed area is excessively corroded o/s front chassis under wheel arch |2.4.A.3|1
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis rail (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area is excessively corroded Floor pan x2 |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded Floor pan x2 |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded Boot well |2.4.A.3|1
Nearside Front Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced retaining nut |2.4.G.1|1
Offside Front Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced Retaining nut |2.4.G.1|1
Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt holed and twisted (2.1.3 (g) (ii))1
Side repeater lens defective such that the emitted light is adversely affected lens missing (4.4.1 (b) (ii))1
Brake prescribed area is excessively corroded abs module (1.1.21 (e) (i))1
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg/previous plate weld has broke away (5.3.6 (a) (i))1
Nearside Front Brake prescribed area is excessively corroded abs module (1.1.21 (e) (i))1
Nearside Front Suspension spring mounting prescribed area is excessively corroded chassis/inner wing |2.4.A.3|1
Offside Front Suspension spring mounting prescribed area is excessively corroded chassis/inner wing |2.4.A.3|1
Outer Stop lamp not working |1.2.1b|1
Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both outer sills (5.3.6 (a) (i))1
Offside Front Anti-lock braking system wheel speed sensor missing (1.6 (c))1
Exhaust has a major leak of exhaust gases mid to rear joint |6.1.2 |a||1
Parking brake lever has no reserve travel rear |3.1.6b|1
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2|1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill and inner sills hole+rotten at rear (6.2.2 (d) (i))1
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear outer sill and inner rear rotten (6.2.2 (d) (i))1
Central Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))1
Central Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a))1
Engine MIL inoperative or indicates a malfunction eml light on on dash (8.2.1.2 (h))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor area and towards sill (7.1.1 (a) (i))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill area (7.1.1 (a) (i))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor bulk head area (7.1.1 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced FLOOR (7.1.1 (a) (i))1
Emissions not tested ENGINE RUNNING ROUGH (8.2.1.2 (d))1
Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Outer sill |6.1.B.2|1
Nearside Front brake caliper has restricted free movement slow to release poor brake effect |3.5.1k|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis outrigger to inner sill (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to outer sill (5.3.6 (a) (i))1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing/ chassis |6.1.B.2|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills |7.1.1 |a| |i||1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer seal |6.2.2 |d| |i||1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner and outer seal |6.2.2 |d| |i||1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer seal |6.2.2 |d| |i||1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner and outer seal |6.2.2 |d| |i||1
Power steering pipe/hose corroded such that the steering is adversely affected (2.1.5 (g) (ii))1
Emissions not tested emissions not tested due to power steering fluid leak (8.2.1.2 (d))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i||1
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis anti roll bar bush area (5.3.6 (a) (i))1
Offside Rear Outer Suspension component mounting prescribed area is inadequately repaired |2.4.A.3|1
Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wing |5.3.6 |a| |i||1
Battery insecure and likely to fall from carrier battery carrier excessively corroded (4.13 (a) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis both side of anti/roll bar (5.3.6 (a) (i))1
Offside Outer Rear Road wheel bead rim badly distorted |4.2.A.1a|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked |6.1.B.2|1
Nearside Front Anti-roll bar worn and seriously weakened |2.4.G.1|1
Offside Front Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i))1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassi (5.3.6 (a) (ii))1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassi (5.3.6 (a) (ii))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner/outer sill (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner/outer sill (5.3.6 (a) (i))1
Nearside Headlamps matched pair incorrect colour |4.1.4 |a||1
Battery insecure and likely to fall from carrier |4.13 |a| |ii||1
Nearside Rear Sub-frame damaged and seriously weakened (5.3.3 (b) (i))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under sill (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength under sill holed and rusty (5.3.6 (a) (i))1
Offside Rear Braking system leaking brake calliper seal.... |3.6.A.1|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill.... |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill.... |5.2.6|1
Offside Rear Braking system leaking hose `banjo` union.... |3.6.A.1|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch / chassis leg |5.3.6 |a| |i||1
Nearside Outer Seat belt anchorage prescribed area is excessively corroded SILL by |5.2.6|1
Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sil |6.1.B.2|1
Central Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sil |6.1.B.2|1
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded drop sill |5.2.6|1
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded drop sill |5.2.6|1
Nearside Front Suspension component mounting prescribed area is excessively corroded floor outrigger / inner sill |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded floor outrigger / inner drop sill |2.4.A.3|1
Braking system leaking central pipe |3.6.A.1|1
Exhaust has a major leak of exhaust gases exhaust back box (6.1.2 (a))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded and holed (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill to floorpan corroded and holed (7.1.1 (a) (i))1
Exhaust has a major leak of exhaust gases center to rear joint |7.1.2|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis excessively corroded at anti roll bar mount/attachment area (5.3.6 (a) (i))1
Offside Front Position lamp not working Replaced bulb - 501 (4.2.1 (a) (ii))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cassis leg (5.3.6 (a) (i))1
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced and out sill corroded ( holed ) (7.1.1 (a) (i))1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced and outer corroded (holed ) (7.1.1 (a) (i))1
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis holed (6.1.1 (c) (i))1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis holed (6.1.1 (c) (i))1
Nearside Front Anti-roll bar has excessive play in a ball joint drop link |2.4.G.2|1
Nearside Front Inner Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii||1
Offside Front Inner Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii||1
Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg |5.3.6 |a| |ii||1
Nearside Front Upper Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))1
Nearside Rear Anti-roll bar modified so the suspension is likely to fail other components |5.3.3 |c| |ii||1
Nearside Service brake grabbing severely |1.2.1 |c||1
Exhaust catalytic converter obviously modified (8.2.1.1 (a))1
Front Position lamp adversely affected by the operation of another lamp (4.2.3 (c))1
Power steering pump leaking from a failed component |2.3.3b|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg in engine bay |2.4.A.3|1
Nearside Seat belt anchorage prescribed area is excessively corroded sill front and rear |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded sill front and rear |5.2.6|1
Exhaust emissions likely to be affected by an exhaust leak centre section disconnected (8.2.2.1 (b))1
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill to floor seam holed |5.2.6|1
Offside Rear Subframe mounting prescribed area is excessively corroded INNER SILL/CHASSIS |2.4.A.3|1
Offside Front Stop lamp|s| not working |4.3.1 |a| |ii||1
Nearside Rear Anti-lock braking system wiring excessively damaged insecure (1.6 (d))1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OUTER SILL |6.1.B.2|1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill. (7.1.1 (a) (i))1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill. (7.1.1 (a) (i))1
Rear Coil spring mounting insecure (5.3.1 (a) (i))1
Rear Coil spring insecure (5.3.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail at anti roll bar mount (5.3.6 (a) (i))1
Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))1
Offside Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill |6.2.2 |d| |ii||1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arc h sill needs welding |6.1.B.2|1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch sill needs welding |6.1.B.2|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/ floor |7.1.1 |a| |i||1
Exhaust has a major leak of exhaust gases rear box joint |7.1.2|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/floor (7.1.1 (a) (i))1
Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))1
Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))1
Nearside Front Lower Body panel corroded and likely to cause injury Outer sill (6.2.1 (a) (i))1
Offside Front Lower Body panel corroded and likely to cause injury Outer sill (6.2.1 (a) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail |6.1.1 |c| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced corner inner sill |7.1.1 |a| |i||1
Offside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Offside Brake pipe leaking on a hydraulic braking system front to rear brake pipe |1.1.11 |b| |ii||1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering under a wing chassis holed and corroided |6.1.1 |c| |ii||1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering under wing holed and corroided |6.1.1 |c| |ii||1
Offside Front Suspension arm severely distorted |2.4.G.1|1
Nearside Front Front position lamp|s| has less than 50% of the light sources illuminating side |1.1.A.3b|1
Offside Front Front position lamp|s| has less than 50% of the light sources illuminating side |1.1.A.3b|1
Brake hydraulic reservoir leaking hydraulic fluid |3.6.A.1|1
Nearside Rear Body has a sharp edge caused by corrosion outer |6.1.C.1|1
Offside Rear Body has a sharp edge caused by corrosion outer |6.1.C.1|1
Nearside Rear Inner Body has a sharp edge caused by corrosion |6.1.C.1|1
Nearside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength wheel arch (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength wheel arch (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength floor (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength floor (5.3.6 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))1
Rear position lamp|s| not working |1.1.A.3b|1
Access panel cannot be secured in the closed position |6.4.1|1
Offside Rear position lamp|s| incorrect colour cracked lense |1.1.A.3e|1
Offside Inner Steering rack insecure |2.2.B.1a|1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outr sill |6.1.B.2|1
Nearside Front Power steering pipe|s| or hose|s| leaking steel pipe low pressure side |2.3.3b|1
Nearside Rear Parking brake inoperative on one side only holding at 30 (1.4.1 (a))1
Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired battery tray corroded and holes in seams (6.2.2 (d) (ii))1
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced boot floor holes on seam and soft to the touch (6.1.1 (c) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis holes in floor and parts missing exposing wires (6.1.1 (c) (i))1
Exhaust has a major leak of exhaust gases joint on catalytic converter (6.1.2 (a))1
Exhaust has a major leak of exhaust gases Middle and back exhaust |7.1.2|1
Subframe mounting prescribed area is excessively corroded nearside front chassis leg |2.4.A.3|1
Subframe mounting prescribed area is excessively corroded offside front chassis leg |2.4.A.3|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above osf anti roll bar bush in wheel arch (6.1.1 (c) (i))1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced middle next to seat anchor (6.1.1 (c) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill area |7.1.1 |a| |i||1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassie |6.1.A.1|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheels arch |7.1.1 |a| |i||1
Offside Seat belt anchorage prescribed area is excessively corroded sill at rear split from inner |5.2.6|1
Emissions not tested due to engine over heating (8.2.1.2 (d))1
Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill corroded (6.2.2 (d) (ii))1
Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill corroded (6.2.2 (d) (ii))1
Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired spare wheel carrier & boot floor. (6.2.2 (d) (ii))1
Rear Exhaust system insecure backbox bracket (6.1.2 (a))1
Rear Exhaust emissions likely to be affected by an exhaust leak back box join. (8.2.1.1 (b))1
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch/chassis |2.4.A.3|1
Nearside Front Headlamp aim beam image obviously incorrect Dim light output - Faulty bulb |1.8.A.1b|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner supporting panel |5.2.6|1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis, inner wing area (6.2.2 (d) (i))1
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill area as marked rusted and holed |2.4.A.3|1
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6|1
Nearside Front Seat belt anchorage prescribed area is excessively corroded rear inner wheel arch |5.2.6|1
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded rear wheel arch holed |2.4.A.3|1
Windscreen wiper not working |3.4 |a||1
Nearside Suspension component mounting prescribed area is inadequately repaired sill |5.3.6 |a| |i||1
Offside Suspension component mounting prescribed area is inadequately repaired sill |5.3.6 |a| |i||1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Cill holed and weak |7.1.1 |a| |i||1
Offside Rear Rear position lamp|s| incorrect colour lens damaged |1.1.A.3e|1
Offside Rear Stop lamp emits other than a steady red light lens damaged |1.2.1e|1
Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to arch |6.1.B.2|1
Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to arch |6.1.B.2|1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis inner arch (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis inner arch (5.3.6 (a) (i))1
Nearside Seat belt anchorage prescribed area is excessively corroded rear wheel arch |5.2.6|1
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Front both parts of chassis corroded and starting to crack |6.1.B.2|1
Offside Rear Outer Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2|1
Nearside Rear Outer Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing / chassis section (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing / chassis section (5.3.6 (a) (i))1
Offside Front Horn not working (7.7 (a) (ii))1
rear brake recording little or no effort N/S IN/OP |3.7.B.5a|1
Nearside Front Inner Track rod end ball joint has excessive play Inner tie rod play (2.1.3 (b) (i))1
Offside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor pan (6.1.1 (c) (i))1
Nearside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i))1
Nearside Suspension component mounting prescribed area is excessively corroded rear sill to floor |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis rail/inner flitch |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area is inadequately repaired sill/innersill |5.2.6|1
Nearside Front Suspension component mounting prescribed area is excessively corroded Chassis leg |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Chassis, inner sill and upper wheel arch (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Chassis, inner sill and inner upper wheel arch (7.1.1 (a) (i))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor to sill and chassis (5.3.6 (a) (i))1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor to inner sill and chassis (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis around anti roll bar mount (5.3.6 (a) (i))1
Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch around strut top mount (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis around anti roll bar mount (5.3.6 (a) (i))1
Centre Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||1
Central Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||1
Central Rear Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i||1
Offside Rear Lower Rear fog lamp does not emit a steady red light |4.5.4 |a||1
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition exhaust blow |8.1.1 |a||1
Nearside Rear Rear position lamp|s| incorrect colour damaged |1.1.A.3e|1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength very front chassi rail |5.3.6 |a| |i||1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill is corroded |6.2.2 |d| |i||1
Nearside Rear Body component likely to become detached sill is corroded and likely to become detached |6.2.1 |a| |ii||1
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill skin |5.2.6|1
Anti-lock braking system warning lamp sequence is incorrect |3.4.1d|1
Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill outer (5.3.6 (a) (i))1
Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt insecure (2.1.3 (g) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail@ antiroll bar mount (5.3.6 (a) (i))1
Front Coil spring fractured or broken both front springs broken (5.3.1 (b) (i))1
Nearside Rear Coil spring fractured or broken spring broken (5.3.1 (b) (i))1
Offside Front Inner Steering linkage ball joint has excessive play track rod inner ball joint (2.1.3 (b) (i))1
Offside Front Lower Suspension arm has excessive play in a ball joint full of rusty water !! |2.4.G.2|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis rail at upper front suspension very corroded and holed !!! |2.4.A.3|1
Nearside Outer Suspension component mounting prescribed area is excessively corroded sill at rear end in two places |2.4.A.3|1
Subframe mounting prescribed area is excessively corroded both sides front chassis rails |2.4.A.3|1
Nearside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))1
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill to inner (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer to inner sill (5.3.6 (a) (i))1
Rear Parking brake inoperative on one side os and ns (1.4.1 (a))1
Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under arch (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under arch (7.1.1 (a) (i))1
Supplementary restraint system warning lamp indicates a fault air bag light flashing (7.1.6 (a))1
Parking brake inoperative on one side off side not working (1.4.1 (a))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Arch (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Arch (6.1.1 (c) (i))1
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill (6.2.2 (d) (i))1
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill (6.2.2 (d) (i))1
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill (6.2.2 (d) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength 2 areas (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected INNER WINGS BEHIND WHEEL (5.3.6 (a) (ii))1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected INNER WING BEHIND WHEEL (5.3.6 (a) (ii))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced FOOR/SILLS HOLED/CORRODED ....... (7.1.1 (a) (i))1
Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected FLOOR/CHASSIS REPAIRS NOT SEAM WELDED ....... (5.3.6 (a) (ii))1
Horn sound not in accordance with requirements |7.7 |c||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced innersill |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced innersill |7.1.1 |a| |i||1
Offside Front Suspension rod attachment bracket/mounting damaged and seriously weakened (5.3.3 (b) (i))1
Offside Rear Suspension rod damaged and seriously weakened (5.3.3 (b) (i))1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear end of sill and wheel arch (5.3.6 (a) (i))1
Exhaust has a major leak of exhaust gases middle to rear join (6.1.2 (a))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill(MARKED) (6.2.2 (d) (i))1
Emissions unable to be completed major exhaust leak (8.2.1.2 (d))1
Nearside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings chassis leg tow mount |6.1.B.2|1
Offside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings chassis leg tow mount |6.1.B.2|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under wheel arch |6.1.B.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2|1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting battery boot floor |6.2.2 |d| |i||1
Front Position lamp not working Both sides |4.2.1 |a||1
Offside Front Anti-roll bar linkage has excessive play in a ball joint detached |2.4.G.2|1
Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2|1
Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings floor areas |6.1.B.2|1
Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings floor areas |6.1.B.2|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Hole in Floor within 30cm of Subframe Mounting |5.3.6 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Hole In Floor Area Within 30cm Lower Seat Belt Mounting |7.1.1 |a| |i||1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Hole In Floor Area Within 30cm Lower Seat Belt Mounting |7.1.1 |a| |i||1
Nearside Front Lower Suspension arm insecurely attached |5.3.3 |a| |i||1
Offside Front Anti-lock braking system component inappropriately repaired |3.4.4|1
Nearside Front Direction indicator lens defective such that the emitted light is adversely affected Interaction with sidelight |4.4.1 |b| |ii||1
Offside Front position lamp|s| not working side |1.1.A.3b|1
Nearside Front Suspension component mounting prescribed area is excessively corroded floor and inner sill area |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded floor and inner sill area |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill/box section area |2.4.A.3|1
Offside Seat belt anchorage prescribed area is excessively corroded inner sill area |5.2.6|1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area (5.3.6 (a) (i))1
Offside Rear Lower Suspension arm corroded and seriously weakened corroded and holed (5.3.3 (b) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back of inner wheel arch (5.3.6 (a) (i))1
Nearside Front Suspension component modified so the suspension is inoperative (5.3.3 (c) (ii))1
Offside Front Suspension component modified so the suspension is inoperative Wrong shock absorbers fitted and jammed against wishbone (5.3.3 (c) (ii))1
Nearside Front Electrical wiring insecure and in contact with sharp edges Brackets for wiring not attached to shock absorbers and fouling on anti roll bar drop link. Nearside front shock wrong one and fitted backwards (4.11 (a) (ii))1
Offside Front Electrical wiring insecure and in contact with sharp edges Bracket for wiring not bolted on (4.11 (a) (ii))1
Nearside Rear Lower Suspension arm has an unsafe modification Been welded (5.3.3 (c) (i))1
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (1.1.21 (e) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill in 2 places |7.1.1 |a| |i||1
Offside Rear Inner Seat belt anchorage likely to become detached in the event of a collision sill |7.1.1 |a| |ii||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind front wheel chassis |5.3.6 |a| |i||1
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))1
Valve stem seriously damaged All (5.2.3 (j))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS RAIL (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength CHASSIS RAIL (5.3.6 (a) (i))1
Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired FLOOR NEAR WING (6.2.2 (d) (ii))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill 2 places (7.1.1 (a) (i))1
Battery insecure and likely to fall from carrier well corroded (4.13 (a) (ii))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor under drivers seat (5.3.6 (a) (i))1
Oil leaking continuously from engine posing a serious risk to road safety (8.4.1 (a) (ii))1
Seat belt anchorage prescribed area is excessively corroded n/s/r outer sill |5.2.6|1
Seat belt anchorage prescribed area is excessively corroded offside rear outer sill |5.2.6|1
Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill panel |5.2.6|1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill corroded (5.3.6 (a) (i))1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced centre floor (6.1.1 (c) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i||1
Nearside Rear Suspension component mounting prescribed area is excessively corroded in two places |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded Inner wheel arch |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Inner wheel arch |5.2.6|1
Offside Front Suspension component mounting prescribed area is excessively corroded IN TWO PLACES - YELLOW |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sil |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sil |5.2.6|1
Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3|1
Nearside Rear Exhaust has a major leak of exhaust gases middle to rear flange (6.1.2 (a))1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))1
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))1
Nearside Front Brake disc significantly and obviously worn fluctuating under test (1.1.14 (a) (i))1
Exhaust catalytic converter obviously defective (8.2.1.1 (a))1
Offside Front Suspension component mounting prescribed area is excessively corroded Inner wing |2.4.A.3|1
Front Suspension component mounting prescribed area is excessively corroded x2 chassis legs |2.4.A.3|1
Exhaust has a major leak of exhaust gases Centre-to-rear joint |7.1.2|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded INNER & OUTER SILL |5.2.6|1
Nearside Rear Road wheel distorted |4.2.A.1a|1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced full sill (7.1.1 (a) (i))1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassi leg/floor |6.1.B.2|1
Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill/floor pan |5.3.6 |a| |ii||1
Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch / floor pan |5.3.6 |a| |ii||1
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength d bush (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sil (5.3.6 (a) (i))1
Offside Front position lamp|s| has a product on the light source so it is not visible from a reasonable distance |1.1.A.3d|1
Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner cill welding patch (6.2.2 (d) (i))1
Offside Rear Coil spring fractured or broken springs (5.3.1 (b) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear outer sills corroded and holed (covered with filler and underseal) (5.3.6 (a) (i))1
Central Rear Exhaust has a major leak of exhaust gases joint (6.1.2 (a))1
Nearside Front Anti-roll bar linkage has excessive play in a ball joint come apart on ball and socket |2.4.G.2|1
Offside Front Position lamp not working side/parking light (4.2.1 (a) (ii))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced seat belt anchorage (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced seat belt anchorage (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg lower and outer webs (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg lower and outer webs (5.3.6 (a) (i))1
Offside Headlamp aim projected beam image is obviously incorrect bulb incorrectly fitted (4.1.2 (c))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i||1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i||1
Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b||1
Front Seat belt anchorage prescribed area strength or continuity significantly reduced n/s o/s seat/seat belt mount (7.1.1 (a) (i))1
Rear Service brake excessively binding n/s o/s (1.2.1 (f))1
Rear Coil spring fractured or broken n/s o/s (5.3.1 (b) (i))1
Emissions not tested EML illuminated (8.2.1.2 (d))1
Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired ARB mount area (n/s o/s (6.2.2 (d) (ii))1
Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear sill pockets (n/s o/s (6.1.1 (c) (i))1
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill at centre (7.1.1 (a) (i))1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wing (5.3.6 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wing (5.3.6 (a) (i))1
Nearside Seat belt anchorage prescribed area is excessively corroded Rear sill |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded Rear sill |5.2.6|1
Front Upper Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b|1
Offside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Front Body panel corroded and likely to cause injury inner sill (6.2.1 (a) (i))1
Offside Front Body panel corroded and likely to cause injury inner sill (6.2.1 (a) (i))1
Offside Front Body panel corroded and likely to cause injury outer sill (6.2.1 (a) (i))1
Nearside Front Body panel corroded and likely to cause injury outer sill (6.2.1 (a) (i))1
Offside Rear Floor excessively deteriorated battery tray excessively corroded. (6.2.4 (a) (i))1
Nearside Rear Floor excessively deteriorated boot Floor excessively corroded (6.2.4 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail / by anti - roll bar mount (5.3.6 (a) (i))1
Offside Rear Vehicle structure is deformed and structural rigidity is significantly reduced (6.1.1 (a) (i))1
Rear Exhaust system insecure joint broken (6.1.2 (a))1
Offside Front Suspension component mounting prescribed area is excessively corroded CHASSIS LEG |2.4.A.3|1
Offside Front Anti-roll bar linkage fractured drop link |5.3.3 |b| |ii||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor area |7.1.1 |a| |i||1
Central Front Power steering pipe|s| or hose|s| excessively corroded |2.3.2|1
Nearside Front Anti-roll bar linkage fractured upper joint |2.4.G.1|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded sill outer and inner .driver`s seat |5.2.6|1
Nearside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg under bonnet (6.2.2 (d) (i))1
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i))1
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill x2 (6.2.2 (d) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis (6.2.2 (d) (i))1
Nearside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg (6.2.2 (d) (i))1
Offside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg (6.2.2 (d) (i))1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch x5 (6.2.2 (d) (i))1
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch x4 (6.2.2 (d) (i))1
Brake performance not tested brake performance not tested as concerns is strength of chassis (1.2.1 (g))1
Front Exhaust has a major leak of exhaust gases front to middle pipe (6.1.2 (a))1
Nearside Rear Outer Integral body structure is deformed and structural rigidity is significantly reduced sill (6.1.1 (a) (i))1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both rear inner wheel arches (6.2.2 (d) (i))1
Offside Seat belt anchorage prescribed area is excessively corroded chassis |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor/ inner sill |5.2.6|1
Offside Front Body has a sharp edge caused by corrosion Wing |6.1.C.1|1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Underside near seat belt mountings |6.1.B.2|1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2|1
Nearside Front Lower Body insecure and dangerous to other road users wing |6.1.B.1b|1
Offside Front Lower Body insecure and dangerous to other road users wing |6.1.B.1b|1
Offside Rear Braking system leaking caliper |3.6.A.1|1
Offside Front Upper coil spring broken |2.4.C.1a|1
Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Both Sills (6.2.2 (d) (i))1
Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Both Sills (6.2.2 (d) (i))1
Suspension arm ball joint excessively worn (5.3.4 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))1
Offside Rear Lower Suspension arm pin or bush excessively worn |5.3.4 |a| |i||1
Offside Front Anti-roll bar missing |2.4.G.1|1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2|1
Battery insecure Battery Loose |in rear of car| |1.9.1|1
Power steering pipe|s| or hose|s| excessively corroded Small Bore pipe on rack badly corroded! |2.3.2|1
Power steering pipe|s| or hose|s| excessively damaged Power Steering pipe kinked! |2.3.2|1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis Rail badly corroded! |6.1.A.1|1
Nearside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a|1
Nearside Rear Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.3.D.1|1
Nearside Inner brake disc excessively pitted |3.5.1h|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch Chassis |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area is excessively corroded strut top mount and spring area |2.4.A.3|1
Hazard warning switch inoperative lights wont knock off alarm |4.4.2 |a| |ii||1
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed |5.3.6 |a| |i||1
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis inner arch |6.1.1 |c| |i||1
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis inner arch |6.1.1 |c| |i||1
Rear Emissions not tested |7.3.A.1|1
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))1
Exhaust has a major leak of exhaust gases Centre to Rear exhaust joint (6.1.2 (a))1
Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected arch |5.3.6 |a| |ii||1
Valve stem seriously damaged All valves (5.2.3 (j))1
Offside Front Anti-roll bar linkage has excessive play in a ball joint Detached. |2.4.G.2|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Floor marked in yellow (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill marked in yellow (7.1.1 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both side front chassis by front sub-frame marked in yellow (5.3.6 (a) (i))1
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cill (6.2.2 (d) (i))1
Nearside Front Suspension component mounting prescribed area is excessively corroded anti-roll bar mount |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded anti-roll bar mount |2.4.A.3|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch chassis rail (6.1.1 (c) (i))1
Nearside Suspension arm has excessive play in a ball joint |2.4.G.2|1
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside rear inner sill (6.1.1 (c) (i))1
Service brake excessively fluctuating both front disc (1.2.1 (e))1
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced offside rear to boot floor (6.1.1 (c) (i))1
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced offside front inner wing in engine bay (6.1.1 (c) (i))1
Suspension arm ball joint excessively worn offside front ball joint (5.3.4 (a) (i))1
Position lamp not working all front and rear (4.2.1 (a) (ii))1
All position lamps not working |4.2.1 |a||1
Offside Outer Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing in 2 places (5.3.6 (a) (i))1
Nearside Front Subframe mounting prescribed area is excessively corroded inner wing to chassie |2.4.A.3|1
Offside Front Subframe mounting prescribed area is excessively corroded chassie by anti roll bar bracket |2.4.A.3|1
Offside Front Subframe mounting prescribed area is excessively corroded inner wing to floor |2.4.A.3|1
Nearside Seat belt anchorage prescribed area is excessively corroded centra chassie |5.2.6|1
Nearside Seat belt anchorage prescribed area is inadequately repaired centra chassie |5.2.6|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked with chalk |6.1.B.2|1
Nearside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt upper arm |2.4.G.2|1
Suspension component mounting prescribed area is excessively corroded o/s sill |2.4.A.3|1
Suspension component mounting prescribed area is excessively corroded n/s sill |2.4.A.3|1
Subframe mounting prescribed area is excessively corroded n/s chassis rail |2.4.A.3|1
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt top arm |2.4.G.2|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i))1
Nearside Headlamp aim beam image obviously incorrect Also very dim |1.8.A.1b|1
Rear Lower Suspension arm corroded and seriously weakened Both sides |2.4.G.1|1
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` mirror hanger |8.3.1e|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Anti roll bar mounting area (inner wing) (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Anti roll bar mounting area (inner wing) (5.3.6 (a) (i))1
Exhaust has a major leak of exhaust gases rear joint |7.1.2|1
Suspension component mounting prescribed area is excessively corroded both front chassis / inner flitches in several places |2.4.A.3|1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill end,inner wing (6.1.1 (c) (i))1
Rear Service brake excessively binding both sides (1.2.1 (f))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced rear inner sill |7.1.1 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear inner sill |7.1.1 |a| |i||1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill to floor (7.1.1 (a) (i))1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill rotted within 30cm of seatbelt mount (7.1.1 (a) (i))1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill rotted within 30cm of seatbelt mount (7.1.1 (a) (i))1
Exhaust has a major leak of exhaust gases centre pipe has snapped |7.1.2|1
Brake disc significantly and obviously worn All (1.1.14 (a) (i))1
Brake pipe leaking on a hydraulic braking system FRONT TO REAR BRAKE PIPE IN CLIP (1.1.11 (b) (ii))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear of inner sill (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill has 2x holes towards rear (7.1.1 (a) (i))1
Nearside Front Upper Front suspension locking device missing ball joint |2.5.A.4|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings anti roll bar D bush |6.1.B.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings anti roll bar D bush |6.1.B.2|1
Offside Front Service brake excessively binding unable to test hub bearing |1.2.1 |f||1
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to floor |6.1.B.2|1
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||1
Offside Front Inner Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i||1
Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||1
Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Boot floor area (6.1.1 (c) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Boot floor area (6.1.1 (c) (i))1
Rear Seat belt anchorage prescribed area is excessively corroded sills inner and outer |5.2.6|1
Suspension arm corroded and seriously weakened both rear top |2.4.G.1|1
Nearside Front Lower Suspension component ball joint excessively worn |5.3.4 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill area |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill area |5.3.6 |a| |i||1
Nearside Front Lower Anti-roll bar insecure |2.4.G.1|1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill corroded (6.2.2 (d) (i))1
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill area around jacking point (6.2.2 (d) (i))1
Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Jacking point area (6.2.2 (d) (i))1
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2|1
Emissions not tested Due to excessive coolant leak |7.3.A.1|1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg perforated (6.1.1 (c) (i))1
Offside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced Chassis leg badly covered in thin repair material (6.1.1 (d) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill and inner front of rear wheel arch (6.2.2 (d) (i))1
Offside Front Body panel insecure Front wing bottom insecure (rotton) (6.2.1 (a) (i))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis cross member (inner sill area) (6.2.2 (d) (i))1
Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wing (6.2.2 (d) (i))1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail (6.1.1 (c) (i))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting battery mount (6.2.2 (d) (i))1
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both inner arches (5.3.6 (a) (i))1
Nearside Front Body insecure wing insecure |6.2.2 |a| |i||1
Offside Front Body insecure wing insecure |6.2.2 |a| |i||1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill is corroded |7.1.1 |a| |i||1
Nearside Front Floor excessively deteriorated at outer sill (6.2.4 (a) (i))1
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))1
Central Suspension component attachment bracket/mounting likely to become detached (5.3.3 (a) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at anti roll bar mounting |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill (5.3.6 (a) (i))1
Offside Rear Outer Suspension component mounting prescribed area fractured significantly reducing structural strength sill (5.3.6 (a) (i))1
Nearside Rear Outer Suspension component mounting prescribed area fractured significantly reducing structural strength sill (5.3.6 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor around drivers seat (7.1.1 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength marked in chalk (5.3.6 (a) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing/front (6.1.1 (c) (i))1
Central Rear Sound deadening material likely to become detached |8.1.1 |b| |ii||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front chassis has marked (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Inner sill has marked (5.3.6 (a) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing/chassis holed (6.1.1 (c) (i))1
Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill corroded /holed (6.1.1 (c) (i))1
Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill corroded /holed filled with body filler (6.1.1 (c) (i))1
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corroded /holed filled with filler (6.1.1 (c) (i))1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill, inner and outer (5.3.6 (a) (i))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill inner and outer near component mounts at rear (5.3.6 (a) (i))1
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inside wheelarches close to strut top mount at both sides, big holes (5.3.6 (a) (i))1
Nearside Rear Lower Shock absorbers likely to become detached snapped bush housing (5.3.2 (a) (ii))1
Offside Rear Lower Shock absorbers likely to become detached cracked bush housing (5.3.2 (a) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis leg, yellow chalked (5.3.6 (a) (i))1
Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill, marked with yellow chalk (7.1.1 (a) (i))1
Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill, marked with yellow chalk (7.1.1 (a) (i))1
Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/floor marked with yellow chalk (7.1.1 (a) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/floor marked with yellow chalk (6.1.1 (c) (i))1
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill. (7.1.1 (a) (i))1
Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area (6.1.1 (c) (i))1
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area (6.1.1 (c) (i))1
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area (6.1.1 (c) (i))1
Rear Sub-frame attachment bracket/mounting insecure missing front bolts nearside plus offside loose (5.3.3 (a) (i))1
Nearside Parking brake inoperative on one side low effort (1.4.1 (a))1
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill,as marked (5.3.6 (a) (i))1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill,as marked (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail,next to anti roll bar mounting,as marked (5.3.6 (a) (i))1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill,as marked (5.3.6 (a) (i))1
Rear Coil spring fractured or broken n/s and o/s (5.3.1 (b) (i))1
Offside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nearside front chassis (5.3.6 (a) (i))1
Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Offside front inner arch (5.3.6 (a) (ii))1
Body panel damaged and likely to cause injury Nearside sill - various corrosion marked in chalk (6.2.1 (a) (i))1
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/f sill (6.1.1 (c) (i))1
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/r sill (6.1.1 (c) (i))1
Offside Front Anti-roll bar linkage missing In two pieces |2.4.G.1|1
Nearside Front Subframe mounting prescribed area is excessively corroded floor-inner sill |2.4.A.3|1
Offside Front Subframe mounting prescribed area is inadequately repaired floor- inner sill,has been fibre glassed |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill to inner arch (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor pan |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg | under wheel arch | |5.3.6 |a| |i||1
Offside Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6|1
Nearside Rear Suspension component insecurely attached top mount (5.3.3 (a) (i))1
Nearside Rear Brake lever has restricted free movement (1.1.15 (e))1
Nearside Front Hydraulic fluid leaking continuously posing a serious risk to road safety (8.4.1 (a) (ii))1
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Both front inner sills (6.1.1 (c) (i))1
Headlamp missing both front (4.1.1 (a) (ii))1
Anti-roll bar linkage ball joint excessively worn both front (5.3.4 (a) (i))1
Nearside Front Steering component deformed (2.1.3 (c) (i))1
Centre Rear Exhaust has a part missing |7.1.1a|1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill has a hole made with thumb pressure repair required to whole area marked in orange and at rear of inner sill (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch marked in orange (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch marked in orange (5.3.6 (a) (i))1
Oil leaking excessively from engine and gearbox (8.4.1 (a) (i))1
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits 30 limit 20 (8.2.1.2 (b))1
Exhaust Lambda reading after 2nd fast idle outside specified limits 1.070 limit 1.03 (8.2.1.2 (c))1
Offside Outer Rear Exhaust system not adequately supported |7.1.1|1
Nearside Front Inner Floor excessively deteriorated |6.2.4 |a| |i||1
Offside Front Outer Floor excessively deteriorated |6.2.4 |a| |i||1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected floor to sill |5.3.6 |a| |ii||1
Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill excessively corroded (6.1.1 (c) (i))1
Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill excessively corroded (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Boot floor excessively corroded, battery likely to fall out (6.1.1 (c) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Boot floor excessively corroded (6.1.1 (c) (i))1
Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt n/s/ both |2.4.G.2|1
Offside Front Upper Sub-frame ball joint likely to become detached (5.3.4 (a) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor as marked (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor as marked (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill as marked (5.3.6 (a) (i))1
Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill and arch |6.1.A.1|1
Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1|1
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded door piller |3.6.C.3|1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering abs pump |6.1.A.1|1
Offside Rear Braking system leaking Front to rear pipe corroded and leaking |3.6.A.1|1
Nearside Body panel corroded and likely to cause injury (6.2.1 (a) (i))1
Nearside Front Body panel likely to become detached (6.2.1 (a) (ii))1
Offside Front Body panel likely to become detached (6.2.1 (a) (ii))1
Suspension arm pin or bush excessively worn rear d bushes (5.3.4 (a) (i))1
Front Headlamp has a product on the lens so that the light output is severely reduced both (4.1.4 (b))1
Offside Front Torque/reaction arm has excessive play in a pin/bush |2.4.G.2|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill holed 30 cm from seat belt mount |2.4.A.3|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor section (5.3.6 (a) (i))1
Headlamp aim projected beam image is obviously incorrect lens clouded (4.1.2 (c))1
Nearside Rear Road wheel more than one fixing missing (5.2.1 (a) (ii))1
Offside Rear Road wheel more than one fixing missing (5.2.1 (a) (ii))1
Headlamp not working on dipped beam o/s n/s (4.1.1 (a) (ii))1
Headlamp not working on main beam o/s n/s (4.1.1 (a) (ii))1
Headlamp light source and lamp not compatible o/s n/s (4.1.4 (c))1
Offside Rear fog lamp has a product on the lens so it is not visible from a reasonable distance |1.3.2d|1
Nearside Headlamp aim beam image obviously incorrect lens deteriorated |1.8.A.1b|1
Offside Headlamp aim beam image obviously incorrect lens deteriorated |1.8.A.1b|1
Offside Rear Brake disc fractured (1.1.14 (a) (ii))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor pan corroded and holed (7.1.1 (a) (i))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced underside of chassis leg (6.1.1 (c) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced underside of chassis leg (6.1.1 (c) (i))1
Exhaust emissions likely to be affected by an exhaust leak front downpipe flange joint leaking (8.2.1.1 (b))1
Steering column universal joint insecure lower joint at rack (2.1.3 (a) (i))1
Offside Rear Anti-roll bar linkage attachment bracket/mounting fractured |5.3.3 |b| |ii||1
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill. (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Jacking point (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Jacking point (5.3.6 (a) (i))1
Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill. (5.3.6 (a) (i))1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings os floor |6.1.B.2|1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor front and rear |6.1.B.2|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings os sill |6.1.B.2|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings os inner rear arch |6.1.B.2|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings ns inner rear arch |6.1.B.2|1
Nearside Front Suspension component mounting prescribed area is fractured where marked and rusted |2.4.A.3|1
Nearside Front Lower Oil leaking excessively from engine (8.4.1 (a) (i))1
Exhaust has a major leak of exhaust gases exhaust centre section at rear joint is heavily corroded and leaking. |7.1.2|1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting BOTH OUTER SILLS AT REAR (6.2.2 (d) (i))1
Offside Front position lamp|s| not working poor connection |1.1.A.3b|1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis holed (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing /main member corroded (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing /main member corroded (5.3.6 (a) (i))1
Parking brake inoperative on one side nearside and offside (1.4.1 (a))1
Emissions unable to be completed engine misfire (8.2.1.2 (d))1
Offside Front Suspension component mounting prescribed area is excessively corroded wheel arch. |2.4.A.3|1
Exhaust emissions likely to be affected by an exhaust leak leak at front pipe to manifold (8.2.1.1 (b))1
Rear Exhaust has a major leak of exhaust gases flange badly corroded (6.1.2 (a))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill at rear |7.1.1 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill at rear |7.1.1 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired sill |5.2.6|1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner floor to sill (6.1.1 (c) (i))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner floor to sill (6.1.1 (c) (i))1
Offside Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction |3.1 |a| |ii||1
Offside Front Subframe mounting prescribed area is excessively corroded chassis leg. [visible through off side front wheel arch.] |2.4.A.3|1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg front |6.2.2 |d| |i||1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering MAIN CHASSI CORROADED BY FRONT ROLL BAR MOUNTING ADVISE NOT TO DRIVE VEHICLE NO SUPPORT FOR FRONT ROLL BAR (6.1.1 (c) (ii))1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering FRONT ROLL BAR MOUNTING BADLY CORROADED (6.1.1 (c) (ii))1
Nearside Seat belt locking mechanism does not secure or release |5.2.5a|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Floorpan to inner sill holed |6.1.1 |c| |i||1
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail badly holed |5.3.6 |a| |i||1
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Inner & outer body sill |7.1.1 |a| |i||1
Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Inner & outer body sill |7.1.1 |a| |i||1
Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Inner & outer body sill |7.1.1 |a| |i||1
Nearside Headlamp lens seriously defective No beam pattern (4.1.1 (b) (ii))1
Offside Front Headlamp lens seriously defective No beam pattern (4.1.1 (b) (ii))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill and closing panel (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill and closing panel (5.3.6 (a) (i))1
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded Sill panel |5.2.6|1
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded Sill panel |5.2.6|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner chassis leg (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner chassis leg (5.3.6 (a) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/lower arch (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill within 30cm |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill within 30cm |5.2.6|1
Exhaust has a major leak of exhaust gases centre (6.1.2 (a))1
Nearside Front Headlamp aim projected beam image is obviously incorrect lens deteriorated (4.1.2 (c))1
Exhaust emissions likely to be affected by an exhaust leak High lambda reading (8.2.1.1 (b))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor / inner sill panel |5.3.6 |a| |i||1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded |7.1.1 |a| |i||1
Exhaust carbon monoxide content at idle exceeds manufacturers specified limits cat missing (8.2.1.2 (b))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at inner arch (5.3.6 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at inner arch (5.3.6 (a) (i))1
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits limit 0.30 actual 1.08 (8.2.1.2 (b))1
Exhaust Lambda reading after 2nd fast idle outside specified limits limit0.970 actual 0.968 (8.2.1.2 (c))1
Central Brake lever has insufficient reserve travel handbrake lever (1.1.2 (a))1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill at rear |6.1.B.2|1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill at rear |6.1.B.2|1
Drivers airbag missing steering wheel (7.1.5 (a))1
Nearside Front Headlamp aim beam image obviously incorrect main beam |1.8.A.1b|1
Offside Rear Braking system leaking brake calliper leaking |3.6.A.1|1
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill corroded |2.4.A.3|1
Offside Front Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired chasses leg (6.2.2 (d) (ii))1
Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting marked (6.2.2 (d) (i))1
Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting marked (6.2.2 (d) (i))1
Nearside Front Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired chasses leg (6.2.2 (d) (ii))1
Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting marked (6.2.2 (d) (i))1
Emissions not tested exhaust blow/oil leak (8.2.1.2 (d))1
Seat belt anchorage prescribed area is excessively corroded Near side and off side putter seals |5.2.6|1
Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2|1
Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2|1
Offside Front Suspension component mounting prescribed area is excessively corroded Under wing |2.4.A.3|1
Exhaust has a major leak of exhaust gases Rear box |7.1.2|1
Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outer sill weld has failed (5.3.6 (a) (i))1
Rear Battery insecure and likely to fall from carrier battery in boot (4.13 (a) (ii))1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering In multiple places very bad (6.1.1 (c) (ii))1
Offside Rear Seat belt anchorage prescribed area is inadequately repaired Also corroded and covered with body filler wheel arch and outer sill (7.1.1 (a) (i))1
Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting N S and O S front by anti roll bar mounts (6.2.2 (d) (i))1
Nearside Rear Body panel damaged and likely to cause injury (6.2.1 (a) (i))1
Nearside Headlamp light intensity severely reduced check bulb (4.1.4 (a))1
Nearside Rear Inner Road wheel bead rim badly distorted |4.2.A.1a|1
Front passenger door cannot be opened from inside the vehicle Cant open from outside (6.2.3 (a))1
Rear Exhaust has a major leak of exhaust gases Exhaust system corroded rear section leaking (6.1.2 (a))1
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill corroded (6.2.2 (d) (i))1
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill corroded (6.2.2 (d) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis at anti roll bar mounting |2.4.A.3|1
Exhaust has a major leak of exhaust gases at rear exhaust pipe joint area (6.1.2 (a))1
Offside Rear Coil spring fractured or broken broken |5.3.1 |b| |i||1
Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement N/S/F UPPER MOUNT NO LONGER ATTACHED |2.4.G.2|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg marked yellow chalk (5.3.6 (a) (i))1
Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced both side inner body sills corroded and holes (6.1.1 (c) (i))1
Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced both side rear outer sills corroded and holes on edge (6.1.1 (c) (i))1
Nearside Lower Seat belt anchorage prescribed area is fractured |5.2.6|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner cill |7.1.1 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner cill |7.1.1 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis, anti roll bar mount area (5.3.6 (a) (i))1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and outer sill |5.3.6 |a| |i||1
Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened |5.3.3 |b| |i||1
Exhaust has a major leak of exhaust gases centre and tail pies at flange (6.1.2 (a))1
Nearside Front Anti-roll bar linkage ball joint likely to become detached Not attached (5.3.4 (a) (ii))1
Nearside Rear Service brake excessively binding wheel bearing not checked (1.2.1 (f))1
Offside Rear Service brake excessively binding wheel bearing not checked (1.2.1 (f))1
Fuel cap/sealing device ineffective seal (6.1.3 (b) (i))1
Nearside Windscreen wiper not working (3.4 (a))1
Passengers seat insecure (6.2.6 (a) (ii))1
Offside Outer Track rod end ball joint has excessive play |2.2.B.1f|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Behind and above anti roll bar mounting (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Behind and above anti roll bar mounting (5.3.6 (a) (i))1
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2|1
Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))1
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))1
Offside Front Suspension arm pin or bush excessively worn Rear Bush |5.3.4 |a| |i||1
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sills both sides (6.1.1 (c) (i))1
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Both front chassic legs holed (6.1.1 (c) (i))1
Exhaust emissions likely to be affected by an exhaust leak joint of rear silencer (8.2.1.1 (b))1
Centre Exhaust has a major leak of exhaust gases centre back box |7.1.2|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced corroded on outer sill 30cm of seat belt mount (7.1.1 (a) (i))1
Nearside Service brake excessively binding |1.2.1 |f||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis area near anti-roll bar mounting (5.3.6 (a) (i))1
Offside Front Steering system has excessive free play detected at the steering wheel |steering rack fitted| TRACK ROD |2.2.A.1b|1
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid Pipe/calliper. (1.1.16 (b) (i))1
Nearside Outer Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))1
Horn not working and missing (7.7 (a))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill chalked (5.3.6 (a) (i))1
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wing |2.4.A.3|1
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Box section |6.1.B.2|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner, outer and inner wheel arch to outer sill have excess corrosion. (7.1.1 (a) (i))1
Nearside Rear Hydraulic brake calliper leaking Brake calliper leaking brake fluid. (1.1.16 (b) (i))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner & outer sill area |5.2.6|1
Offside Front Subframe mounting prescribed area is excessively corroded outrigger area |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing aera |2.4.A.3|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floorpan |7.1.1 |a| |i||1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floorpan |7.1.1 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floorpan |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floorpan |5.3.6 |a| |i||1
Offside Subframe mounting prescribed area is excessively corroded and nearside floor |2.4.A.3|1
Offside Coil spring fractured or broken and nearside front |5.3.1 |b| |i||1
Offside Rear Lower Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|1
Offside Front Front suspension has excessive movement at a tie bar joint |2.5.A.1c|1
Offside Front Anti-roll bar linkage fractured snapped (5.3.3 (b) (ii))1
Offside Front Subframe mounting prescribed area is inadequately repaired Not completely welded (5.3.6 (a) (i))1
Offside Rear Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Under bonnet (6.1.1 (c) (i))1
Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill corroded and holed (6.1.1 (c) (i))1
Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill corroded and holed (6.1.1 (c) (i))1
Nearside Rear Body panel corroded and likely to cause injury Side skirt area (6.2.1 (a) (i))1
Offside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected outer sill area (5.3.6 (a) (ii))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced SILL...THE REST OF THE SILL IS WEAK (7.1.1 (a) (i))1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL....THE REST OF THE SILL IS WEAK (5.3.6 (a) (i))1
rear brake recording little or no effort Off side rear |3.7.B.5a|1
Exhaust has a major leak of exhaust gases Rear box joint |7.1.2|1
Offside Rear Seat belt anchorage prescribed area is inadequately repaired fibre glass repair (7.1.1 (a) (i))1
Nearside Rear Suspension component mounting prescribed area is excessively corroded boot floor |2.4.A.3|1
Offside Front Lower Suspension arm which is adjustable, loose in adjustment threads |2.4.G.1|1
Nearside Rear Wheel fitment excessively worn between the wheel and hub spigot mounting |4.2.B.5|1
Stop lamp not working ALL |1.2.1b|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced rear wheel arch (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear wheel arch (7.1.1 (a) (i))1
Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced under car |7.1.1 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mount |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mount |5.3.6 |a| |i||1
Offside Rear Suspension arm inappropriately repaired |2.4.A.2|1
Fluid leak harmful to the environment or a risk to other road users coolant |8.4.1 |a| |i||1
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill substantially weakened at B post |6.2.2 |d| |i||1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis/inner arch |6.2.2 |d| |i||1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting boot floor corner |6.2.2 |d| |i||1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch |6.2.2 |d| |i||1
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch |6.2.2 |d| |i||1
Nearside Front Anti-roll bar rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2|1
Offside Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2|1
Rear front brake binding both |3.7.B.1|1
Nearside Front Vehicle structure has damage which adversely affects braking or steering inner wing around suspension top |6.1.A.1|1
Nearside Seat belt anchorage prescribed area is excessively corroded inner to outer sill |5.2.6|1
Nearside Front Seat belt anchorage prescribed area is excessively corroded floorpan |5.2.6|1
Nearside Front Track rod end ball joint worn to the extent there is a serious risk of detachment |2.1.3 |b| |ii||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill. |7.1.1 |a| |i||1
Nearside Seat belt anchorage prescribed area is excessively corroded outer sill. |5.2.6|1
Brake pipe leaking on a hydraulic braking system front to rear at rear connection (not replaced from previous fail) (1.1.11 (b) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing within 30cm of the strut top mount and and the anti rollbar mounting points (5.3.6 (a) (i))1
Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg rusty and holed next to front subframe mount |6.1.1 |c| |i||1
Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg/inner valance panel rusty and holed next to front subframe mount |6.1.1 |c| |i||1
Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Outer sill. (6.2.2 (d) (i))1
Oil leaking excessively from engine top cover (8.4.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch marked out (7.1.1 (a) (i))1
Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill area marked out (6.2.2 (d) (ii))1
Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill area marked out (6.2.2 (d) (ii))1
Offside Rear Brake hose leaking on an air braking system (1.1.12 (c) (i))1
Nearside Rear Suspension component mounting prescribed area is inadequately repaired Seam outer sill to inner sill (5.3.6 (a) (i))1
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg at anti roll bar mounting (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg at anti roll bar mounting (5.3.6 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed |7.1.1 |a| |i||1
Nearside Seat belt anchorage prescribed area is excessively corroded outer sill [rear end] |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded outer sill [rear end] |5.2.6|1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x cross member (6.1.1 (c) (i))1
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch under bonnet (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Strut tower (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area is excessively corroded hole in sill |5.2.6|1
Exhaust has a major leak of exhaust gases centre and rear sections poor condition |7.1.2|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced At inner sill area(full length & at front of rear wheel arch). (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced At inner sill area & front of rear wheel arch. (7.1.1 (a) (i))1
Front Headlamp aim projected beam image is obviously incorrect both headlights cloudy (4.1.2 (c))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Inner sill area. |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded Inner sill area. |5.2.6|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill floor area. (7.1.1 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill /floor area.(2 places). (7.1.1 (a) (i))1
Offside Front brake caliper locking device insecure |3.5.1l|1
Offside Rear Anti-roll bar severely distorted |2.4.G.1|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced CILL (6.1.1 (a) (i))1
Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced CILL (6.1.1 (a) (i))1
Anti-roll bar linkage has excessive play in a ball joint Broken |2.4.G.2|1
Offside Rear Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3|1
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill at front and rear jacking points |6.1.1 |c| |i||1
Nearside Rear Macpherson strut likely to fail spring base plate on strut has dropped down and could contact drive shaft |5.3.3 |b| |ii||1
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i))1
Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))1
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced FLOOR (6.1.1 (c) (i))1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced FLOOR (6.1.1 (c) (i))1
Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))1
Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced WING (6.1.1 (c) (i))1
Nearside Seat belt anchorage prescribed area is excessively corroded outer sill end |5.2.6|1
Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leg (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill /floor |7.1.1 |a| |i||1
Nearside Rear Anti-roll bar attachment bracket/mounting insecure at bottom arm |5.3.3 |a| |i||1
Nearside Front Seat belt buckle not functioning as intended Not releasing under load (7.1.2 (d))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sills poorly repaired (7.1.1 (a) (i))1
Offside Front Seat belt buckle not functioning as intended Not releasing under load (7.1.2 (d))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis Corroded/Split (5.3.6 (a) (i))1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i))1
Nearside Rear Outer Integral body structure inadequately repaired such that structural rigidity is significantly reduced Outer Sill (6.1.1 (d) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Sill (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Sill (7.1.1 (a) (i))1
Rear Rear position lamp|s| not working |1.1.A.3b|1
Nearside Power steering pipe|s| or hose|s| leaking |2.3.3b|1
Steering column top bearing excessively worn |2.1.2c|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassie leg x2 |2.4.A.3|1
Nearside Suspension component mounting prescribed area is excessively corroded centre chassie leg |2.4.A.3|1
Central Seat belt anchorage prescribed area is excessively corroded floorpans |5.2.6|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing marked yellow |6.1.B.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing marked yellow |6.1.B.2|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill marked yellow |6.1.B.2|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill marked yellow |6.1.B.2|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg marked yellow |6.1.B.2|1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg under floor marked yellow |6.1.B.2|1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg under floor marked yellow |6.1.B.2|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor pan marked yellow |6.1.B.2|1
Offside Rear Lower Suspension arm corroded and seriously weakened lower arm marked yellow |2.4.G.1|1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Within spring mount (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch under bonnet (5.3.6 (a) (i))1
Offside Rear Anti-roll bar rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by anti roll bar link (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front chassis by anti roll bar mounting (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded wheel arch |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded wheel arch |5.2.6|1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner arch at top |2.4.A.3|1
Offside Rear Suspension spring mounting prescribed area is excessively corroded inner arch at top |2.4.A.3|1
Brake performance not tested Front to rear brake pipe leaking |1.2.1 |g||1
Offside Rear Brake pipe leaking on a hydraulic braking system front to rear |1.1.11 |b| |ii||1
Offside Rear Lower Suspension arm rubber mounting deteriorated resulting in excessive movement wishbone arm |2.4.G.2|1
Offside Rear Upper Suspension arm rubber mounting deteriorated resulting in excessive movement wishbone arm |2.4.G.2|1
Offside Front Outer Anti-roll bar linkage insecure |2.4.G.1|1
Nearside Front Suspension component ball joint excessively worn Track rod end |5.3.4 |a| |i||1
Nearside Rear Outer Suspension component pin or bush excessively worn Both bushes |5.3.4 |a| |i||1
Offside Rear Outer Suspension component pin or bush excessively worn Both bushes |5.3.4 |a| |i||1
Nearside Front Integral body structure has a fractured which is likely to adversely affect braking or steering Inner chassis leg hold |6.1.1 |a| |ii||1
Nearside Rear Outer Body panel corroded and likely to cause injury Sill |6.2.1 |a| |i||1
Offside Front Outer Body panel corroded and likely to cause injury Sill |6.2.1 |a| |i||1
Offside Rear Outer Body panel corroded and likely to cause injury Sill |6.2.1 |a| |i||1
Nearside Front Inner Body panel corroded and likely to cause injury sill |6.2.1 |a| |i||1
Offside Rear Inner Body panel corroded and likely to cause injury Sill |6.2.1 |a| |i||1
Nearside Rear Inner Body panel corroded and likely to cause injury Sill |6.2.1 |a| |i||1
Nearside Front Body panel corroded and likely to cause injury Floor holed |6.2.1 |a| |i||1
Offside Rear Body panel corroded and likely to cause injury Boot Floor |6.2.1 |a| |i||1
Nearside Rear Body panel corroded and likely to cause injury Boot floor |6.2.1 |a| |i||1
Front Anti-roll bar has excessive play in a ball joint |2.4.G.2|1
Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Front Suspension component mounting prescribed area is excessively corroded FLOOR TO SILL |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded FLOOR TO SILL |2.4.A.3|1
Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Suspension component mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3|1
Offside Suspension component mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3|1
brake disc in such a condition that it is seriously weakened n,s,f disc corroded inner face |3.5.1i|1
Nearside Rear Lower Suspension arm corroded and seriously weakened badly holed and corroded |2.4.G.1|1
Offside Rear Upper Suspension arm corroded and seriously weakened badly holed and corroded |2.4.G.1|1
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill holed |2.4.A.3|1
Nearside Rear Macpherson strut insecure |2.4.G.1|1
Offside Rear Radius arm has excessive play in a pin/bush |2.4.G.2|1
Offside Front Upper Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded arch x2 |2.4.A.3|1
Offside Front Inner Suspension component mounting prescribed area is excessively corroded x2 |2.4.A.3|1
Nearside Rear Anti-roll bar attachment bracket/mounting insecure bolt snapped |2.4.G.1|1
Rear Anti-roll bar damaged and seriously weakened at both ends ground away |2.4.G.1|1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wing |5.3.6 |a| |ii||1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wing |5.3.6 |a| |ii||1
Nearside Front Upper Suspension component ball joint dust cover missing (5.3.4 (b) (ii))1
Offside Front Upper Suspension component ball joint dust cover missing (5.3.4 (b) (ii))1
Nearside Seat belt anchorage prescribed area is excessively corroded floorpan in 2 places |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded floorpan |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded (7.1.1 (a) (i))1
Offside Front brake caliper securing device missing |3.5.1j|1
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i||1
Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i||1
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i||1
Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i||1
Rear Anti-roll bar corroded and seriously weakened |2.4.G.1|1
Rear Brake lever has abnormal movement of levers indicating maladjustment |3.5.1f|1
Offside Rear Upper Brake pipe leaking |3.6.A.1|1
Offside Front Suspension component mounting prescribed area is excessively corroded inner valance - under bonnet |2.4.A.3|1
Suspension component mounting prescribed area is excessively corroded o/s inner chassis leg |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer and inner sill |7.1.1 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch and chassis |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch and chassis |5.3.6 |a| |i||1
Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2|1
Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings strut top mounting area |6.1.B.2|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point at chassis leg |6.1.B.2|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2|1
Rear Emissions oxygen sensor obviously defective (8.2.1.1 (a))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill / floor (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill / floor (5.3.6 (a) (i))1
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))1
coil spring incomplete |2.4.C.1a|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis close to anti roll bar mounting (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis close to anti roll bar mounting (5.3.6 (a) (i))1
Nearside Inner Integral body structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii||1
Nearside Outer Integral body structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii||1
Offside Inner Integral body structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii||1
Offside Outer Integral body structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii||1
Nearside Rear Outer Integral body structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii||1
Nearside Rear Inner Integral body structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii||1
Offside Rear Inner Integral body structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii||1
Offside Rear Outer Integral body structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii||1
Nearside Front Inner Integral body structure has excessive corrosion which adversely affects braking or steering wheel arch |6.1.1 |c| |ii||1
Nearside Front rear brake excessively fluctuating |3.7.B.3|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer cill |6.1.B.2|1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill |6.1.B.2|1
Offside Front Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill |6.1.B.2|1
Exhaust has a major leak of exhaust gases Centre/rear pipe has a crack in it which is leaking. (6.1.2 (a))1
Rear Exhaust has a major leak of exhaust gases Flexi (6.1.2 (a))1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Marked In Chalk (6.2.2 (d) (i))1
Service brake excessively fluctuating both rear |brake discs corroded and pitted| |1.2.1 |e||1
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch x2 |6.1.1 |c| |i||1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch |6.1.1 |c| |i||1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected anti role bar mtg . (5.3.6 (a) (ii))1
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outer and inner and sill area , (5.3.6 (a) (ii))1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis outrigg on floor . (5.3.6 (a) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing holed in two places . (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area . (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg corroded ,badly . (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing . (5.3.6 (a) (i))1
Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area holed . (5.3.6 (a) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front chassis arm |6.1.1 |c| |i||1
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||1
Brake performance not tested not tested due to leaking brake pipe. |3.7.A.1|1
Rear Braking system leaking metal brake pipe from o/s to n/s corroded & leaking. |3.6.A.1|1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill & floor |6.1.B.2|1
Offside Front Subframe mounting prescribed area is excessively corroded Floor |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded Inner arch |2.4.A.3|1
Rear Exhaust has a major leak of exhaust gases Silence |7.1.2|1
Offside Front position lamp|s| not working Side light |1.1.A.3b|1
Front Exhaust has a major leak of exhaust gases Section |7.1.2|1
Offside Suspension component mounting prescribed area is excessively corroded sill area |2.4.A.3|1
Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing |2.4.A.3|1
coil spring broken o/s rear |2.4.C.1a|1
Headlamp insecure n/s |1.7.3|1
Subframe mounting prescribed area is excessively corroded o/s front floor |2.4.A.3|1
Nearside Lower Seat belt anchorage prescribed area is excessively corroded floor and sill area |5.2.6|1
Nearside Front Suspension spring mounting prescribed area is excessively corroded turret top areas |2.4.A.3|1
Offside Front Suspension spring mounting prescribed area is excessively corroded turret top areas |2.4.A.3|1
Nearside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sill |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded inner and outer sill |5.2.6|1
Nearside Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b|1
Offside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outer sill |5.3.6 |a| |ii||1
Offside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill |5.3.6 |a| |ii||1
Nearside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outer sill |5.3.6 |a| |ii||1
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6|1
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6|1
Nearside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))1
Offside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill corroded (7.1.1 (a) (i))1
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Nearside Inner And Outer Sill Excessively Corroded |6.1.1 |c| |i||1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Offside Inner And Outer Sill Excessively Corroded |6.1.1 |c| |i||1
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced All 4 Wheel Arches Excessively Corroded |6.1.1 |c| |i||1
Offside Front Road wheel fixing missing Road Wheel Nut Missing |5.2.1 |a| |i||1
Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Both Sides Inner Chassis Excessively Corroded |6.1.1 |c| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill |5.3.6 |a| |i||1
Offside Suspension component mounting prescribed area is excessively corroded and nearside inner sills |2.4.A.3|1
Nearside Suspension component mounting prescribed area is excessively corroded panel behind front wheel |2.4.A.3|1
Offside Suspension component mounting prescribed area is excessively corroded and nearside front chassis |2.4.A.3|1
Offside Suspension component mounting prescribed area is excessively corroded front inner sill |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outter sill (7.1.1 (a) (i))1
Nearside Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance bulb |1.1.A.3d|1
Offside Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance bulb |1.1.A.3d|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill & under sill (7.1.1 (a) (i))1
Offside Front Brake actuating linkage mounting prescribed area is excessively corroded floor pan forward of jacking point within brake pedal mounting area |3.3.A.2|1
Windscreen wiper not working both |3.4 |a||1
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wing end sill |5.3.6 |a| |i||1
Nearside Power steering component leaking rack or pipe |2.1.5 |a||1
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch |6.1.1 |c| |i||1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch |6.1.1 |c| |i||1
Nearside Front Power steering component leaking Rack or pipes |2.1.5 |a||1
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength And inner sill |5.3.6 |a| |i||1
Front Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c|1
Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering forward subframe mounting area |6.1.1 |c| |ii||1
Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering forward subframe mounting area |6.1.1 |c| |ii||1
Nearside Front Upper Macpherson strut mounting corroded and seriously weakened |5.3.3 |b| |i||1
Nearside Front Power steering pipe/hose leaking close to reservoir |2.1.5 |a||1
Nearside Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii||1
Nearside Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii||1
Offside Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii||1
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sub frame mount |5.3.6 |a| |ii||1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2|1
Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering corroded and holed within 30cm of top mount (6.1.1 (c) (ii))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill corroded and holed (6.2.2 (d) (i))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill corroded and holed (6.2.2 (d) (i))1
Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch within 30cm suspension (5.3.6 (a) (i))1
Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded INNER / UNDER ARCH |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded FLOOR / FLOOR TO SILL |2.4.A.3|1
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded UNDER SILL |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded UNDER ARCH |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded UNDER ARCH |5.2.6|1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting marked |6.2.2 |d| |i||1
Exhaust silencer likely to become detached |8.1.1 |b| |ii||1
Central Rear Stop lamp not working |1.2.1b|1
Nearside Front Suspension arm corroded and seriously weakened corroded through as chalked |5.3.3 |b| |i||1
Offside Rear Inner Brake pipe excessively damaged (1.1.11 (c))1
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced body sill (7.1.1 (a) (i))1
Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill area /rear wheel arch area |5.2.6|1
Nearside Rear Lower Seat belt anchorage prescribed area is inadequately repaired sill |5.2.6|1
Offside Rear Lower Seat belt anchorage prescribed area is inadequately repaired sill |5.2.6|1
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits high (8.2.1.2 (b))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill & wheel arch |7.1.1 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill, inner and outer (5.3.6 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced front floor and inner sill (7.1.1 (a) (i))1
Offside Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced rear of sill inner and outer holed (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear inner and outer sill holed (7.1.1 (a) (i))1
Emissions not tested due to bad running |8.2.1.2 |d||1
Front coil spring incomplete |2.4.C.1a|1
Nearside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded Closing sill corroded to excess with in 30cm of rear brake componets |3.1.9|1
Offside Front brake caliper leaking From seal |3.6.A.1|1
Front front parking |secondary| brakes imbalanced |3.7.B.6b|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Heavy corrosion in sill below seat belt anchorage point. (7.1.1 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Nearside rear sill corroded through within prescribed area. (7.1.1 (a) (i))1
Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings by anti-roll bar |6.1.B.2|1
Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings by anti-roll bar |6.1.B.2|1
Nearside Front Hydraulic brake calliper inadequately mounted and braking performance affected (1.1.16 (c) (ii))1
Nearside Front All direction indicators adversely affected by the operation of another lamp (4.4.3 (b))1
Central Exhaust has a major leak of exhaust gases EXHAUST SYSTEM BLOWING AT MID SECTION (6.1.2 (a))1
Nearside Front Upper Suspension arm ball joint likely to become detached loose no split pin in castle nut (5.3.4 (a) (ii))1
Nearside Front Lower Suspension arm ball joint likely to become detached castle nut missing locking pin (5.3.4 (a) (ii))1
Offside Inner Seat belt anchorage prescribed area is excessively corroded rear of inner sill |5.2.6|1
Nearside Inner Seat belt anchorage prescribed area is excessively corroded front and rear end of inner sill |5.2.6|1
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits at 4.5% |8.2.1.2 |b||1
Nearside Rear Shock absorbers damaged to the extent that it does not function |5.3.2 |b||1
Offside Rear Shock absorbers damaged to the extent that it does not function |5.3.2 |b||1
Brake performance not tested Brake pipe burst Osr to flexi |3.7.A.1|1
Offside Front Seat belt anchorage prescribed area is excessively corroded Floor |5.2.6|1
Brake pipe leaking from flexi to caliper |3.6.A.1|1
Seat belt anchorage prescribed area strength or continuity significantly reduced both rear sill ends |7.1.1 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Chassis rail (5.3.6 (a) (i))1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner chassis |6.1.B.2|1
Brake pipe at imminent risk of failure or fracture main brake pipe to offside rear flex pipe [leaking] |1.1.11 |a||1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front inner wings at top strut mounts |5.3.6 |a| |i||1
Brake performance not tested due to burst brake pipe |1.2.1 |g||1
Nearside Front Upper Front position lamp|s| not working not working. |1.1.A.3b|1
Offside Front Upper Front position lamp|s| not working not working. |1.1.A.3b|1
Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill |6.2.2 |d| |i||1
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i||1
Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill |6.2.2 |d| |i||1
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i||1
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill |6.2.2 |d| |i||1
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i||1
Central Brake pipe leaking on a hydraulic braking system front- rear brake pipes burst |1.1.11 |b| |ii||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in wheel arch |5.3.6 |a| |i||1
Offside Rear Service brake effort inadequate at a wheel |1.2.1 |a| |i||1
Offside Seat belt anchorage prescribed area is excessively corroded floor plan |5.2.6|1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing |5.3.6 |a| |i||1
Offside Rear Anti-roll bar insecure and impairing directional stability rubbing on cradle (5.3.3 (a) (ii))1
Nearside Rear Body has a sharp edge caused by corrosion outer sill/arch |6.1.C.1|1
Offside Rear Body has a sharp edge caused by corrosion outer sill/arch |6.1.C.1|1
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill in 2 places (6.2.2 (d) (i))1
Exhaust has a major leak of exhaust gases exhaust joint at mid silencer box |6.1.2 |a||1
Exhaust emits clearly visible black smoke during acceleration |8.2.1.2 |g||1
Offside Front Power steering component|s| leaking from a failed seal |2.3.3b|1
Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill/wheel arch |2.4.A.3|1
Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill rear of |5.2.6|1
Offside Rear Brake pipe connection leaking on a hydraulic braking system brake pipe failed leaking |1.1.11 |b| |ii||1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both front chassis legs |6.2.2 |d| |i||1
Front Suspension component attachment bracket/mounting corroded and seriously weakened both front inner wing/suspension turrets |5.3.3 |b| |i||1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor pan |6.2.2 |d| |i||1
Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both front inner sill/inner wings |6.2.2 |d| |i||1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer/inner sill |6.2.2 |d| |i||1
Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a|1
Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg (5.3.6 (a) (ii))1
Nearside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Floor |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded Floor |5.2.6|1
Offside Rear Anti-roll bar attachment bracket/mounting insecure drop link |5.3.3 |a| |i||1
Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill/floor area |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above subframe (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above subframe (5.3.6 (a) (i))1
Offside Rear Lower Floor excessively deteriorated section under offside well corroded and falling away (6.2.4 (a) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill. Corroded and holed (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill. Corroded and holed (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area is inadequately repaired Sill (7.1.1 (a) (i))1
Offside Front Inner Brake master cylinder/servo mounting prescribed area is excessively corroded wing |3.6.C.3|1
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded arch |2.4.A.3|1
Offside Front Inner Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3|1
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|1
Power steering pipe|s| or hose|s| excessively corroded main |2.3.2|1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i||1
Nearside Rear Body component corroded and likely to cause injury arch |6.2.1 |a| |i||1
Front Brake pipe inadequately supported |3.6.B.1|1
Nearside Rear Exhaust has a major leak of exhaust gases centre pipe |7.1.2|1
Emissions not tested extensive blow in exaust |7.3.A.1|1
Offside Outer Subframe mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Outer Subframe mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Brake pipe inadequately clipped |3.6.B.1|1
Nearside Front Subframe mounting prescribed area is excessively corroded chassie |2.4.A.3|1
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to floor |6.1.B.2|1
Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to floor pan |6.1.B.2|1
Emissions not tested Poor running catalic converter missing (8.2.1.2 (d))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill (6.1.1 (c) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill (6.1.1 (c) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill (6.1.1 (c) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Marked in yellow chalk (6.1.1 (c) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Marked in yellow chalk (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Marked in yellow chalk (5.3.6 (a) (i))1
Offside Front Tie bar/rod rubber mounting deteriorated resulting in excessive movement |2.4.G.2|1
Central Exhaust has a major leak of exhaust gases silencer |7.1.2|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced at rear of sill (7.1.1 (a) (i))1
Offside Front Subframe mounting prescribed area is excessively corroded floor/outer sill |2.4.A.3|1
Nearside Front Subframe mounting prescribed area is excessively corroded floor/sill |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill/inner arch |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is fractured wing not welded by joint to outer sill |5.2.6|1
Offside Rear Upper Suspension component mounting prescribed area is inadequately repaired wheel arch area |5.3.6 |a| |i||1
Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area |5.3.6 |a| |i||1
Nearside Headlamp lens seriously defective lens faded / scoring (4.1.1 (b) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor at subframe mounting area (5.3.6 (a) (i))1
Exhaust has a major leak of exhaust gases Centre to rear flanges badly corroded and leaking (6.1.2 (a))1
Offside Rear Braking system leaking at flexi hose/brake pipe joiner |3.6.A.1|1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing holed in two places |6.1.A.1|1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing holed in two places |6.1.A.1|1
Rear Tie bar/rod has excessive play in a ball joint |2.4.G.2|1
Power steering pump drive system defective |2.3.6|1
Nearside Front Anti-roll bar linkage severely distorted |2.4.G.1|1
Nearside Rear Brake pipe at imminent risk of failure or fracture ABOVE AXLE (1.1.11 (a))1
Front Position lamp with a multiple light source more than 1/2 not functioning SIDE-LIGHTS (4.2.1 (a) (ii))1
Nearside Rear Lower Suspension arm likely to fail (5.3.3 (b) (ii))1
Offside Rear Lower Suspension arm likely to fail (5.3.3 (b) (ii))1
Offside Rear Seat belt anchorage prescribed area is excessively corroded Inner sill and wheel arch area |5.2.6|1
Nearside Front Lower Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Front Wheel nut|s| missing x2 |4.2.A.1e|1
Offside Front Wheel nut|s| missing x2 |4.2.A.1e|1
Seat belt anchorage prescribed area is excessively corroded inner cill |5.2.6|1
Seat belt anchorage prescribed area is excessively corroded inner arch |5.2.6|1
Nearside Rear Subframe mounting prescribed area is excessively corroded boot floor |2.4.A.3|1
Offside Front Body has an unsafe modification outer sill |6.2.1 |d| |i||1
Offside Inner Body has an unsafe modification rear sill |6.2.1 |d| |i||1
Nearside Front Body has an unsafe modification sill |6.2.1 |d| |i||1
Nearside Rear Body has an unsafe modification inner and outer sill |6.2.1 |d| |i||1
brake disc in such a condition that it is seriously weakened offside and nearside front |3.5.1i|1
Offside Rear Suspension component mounting prescribed area is excessively corroded sill area underneath body |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch, chassis leg at front |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch, chassis leg at front |2.4.A.3|1
Nearside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings boot / floor |6.1.B.2|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top and bottom front chassis leg (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top and bottom front chassis leg (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength around strut turret (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength around strut turret (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under floor (5.3.6 (a) (i))1
Nearside Rear Battery insecure and likely to cause a short circuit under floor, under battery badly corroded (4.13 (a) (ii))1
Offside Rear Suspension spring mounting prescribed area fractured significantly reducing structural strength outer sill |5.3.6 |a| |i||1
Nearside Rear Suspension spring mounting prescribed area fractured significantly reducing structural strength outer sill |5.3.6 |a| |i||1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i||1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i||1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wing (5.3.6 (a) (ii))1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wing (5.3.6 (a) (ii))1
Nearside Outer Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i))1
Nearside Outer Seat belt anchorage likely to become detached in the event of a collision sill (7.1.1 (a) (ii))1
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected out riger at spring (5.3.6 (a) (ii))1
Coil spring fractured or broken both front (5.3.1 (b) (i))1
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected arch (5.3.6 (a) (ii))1
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected arch (5.3.6 (a) (ii))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill within 30 cms (7.1.1 (a) (i))1
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill within 30cm (7.1.1 (a) (i))1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill within 30cm (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan/sill (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floorpan/sill (5.3.6 (a) (i))1
Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2|1
Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2|1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected above anti roll bar mounting (5.3.6 (a) (ii))1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected above anti roll bar mounting (5.3.6 (a) (ii))1
Offside rear brake recording little or no effort hand brake |3.7.B.5a|1
Nearside Floor excessively deteriorated floor to sill not welded (6.2.4 (a) (i))1
Offside Floor excessively deteriorated floor to sill not welded (6.2.4 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area |5.3.6 |a| |i||1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill under vehicle |5.2.6|1
Wheel nut|s| missing all four |4.2.A.1e|1
Seat belt anchorage prescribed area is inadequately repaired Nearside & offside floors (7.1.1 (a) (i))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch |6.2.2 |d| |i||1
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits 1.12 |7.3.D.3|1
Exhaust has a major leak of exhaust gases middle to rear join area |7.1.2|1
Nearside Seat belt anchorage prescribed area is excessively corroded inner and outer sill areas |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded inner and outer sill areas |5.2.6|1
Offside Rear Lower Front suspension has excessive movement at a suspension ball joint |2.5.A.1c|1
Headlamps matched pair are incorrectly positioned |1.7.3|1
Nearside Front Anti-roll bar linkage fractured broke |2.4.G.1|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner box section (5.3.6 (a) (i))1
Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and outer sill near seat belt mounting |6.1.B.2|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded door sill |5.2.6|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in engine bay to inner arch (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in engine bay to inner arch (5.3.6 (a) (i))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor to inner sill (5.3.6 (a) (i))1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced central sill to floor (7.1.1 (a) (i))1
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/ floor (7.1.1 (a) (i))1
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength quarter floor (5.3.6 (a) (i))1
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength quarter floor (5.3.6 (a) (i))1
Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))1
Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))1
Nearside Rear Suspension arm cracked |2.4.G.1|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded in wheel arch end |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded in wheel arch end |5.2.6|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre and front floor (7.1.1 (a) (i))1
Nearside Anti-roll bar linkage fractured |2.4.G.1|1
Nearside Front Macpherson strut corroded and seriously weakened |2.4.G.1|1
Offside Front Macpherson strut corroded and seriously weakened |2.4.G.1|1
Offside Rear Upper Anti-roll bar linkage synthetic mounting deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Steering rack damaged and unserviceable |2.2.C.1d|1
Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Seat belt anchorage prescribed area is excessively corroded nearside outer sill in two places |5.2.6|1
Suspension spring mounting prescribed area is excessively corroded offside front inner wheel arch |2.4.A.3|1
Suspension spring mounting prescribed area is excessively corroded nearside front inner wheel arch in two places |2.4.A.3|1
Suspension spring mounting prescribed area is excessively corroded nearside front chassis |2.4.A.3|1
Seat belt anchorage prescribed area is excessively corroded nearside inner sill to floor |5.2.6|1
Seat belt anchorage prescribed area is excessively corroded offside inner sill to floor |5.2.6|1
Suspension spring mounting prescribed area is excessively corroded nearside rear inner wheel arch |2.4.A.3|1
Suspension spring mounting prescribed area is excessively corroded offside rear inner wheel arch |2.4.A.3|1
Nearside Rear Brake pipe leaking Pipe corroded |3.6.A.1|1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i||1
Offside Vehicle structure is fractured and structural rigidity is significantly reduced central (6.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg holed with corrosion at inner wheel arch above anti roll bar mount (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area is excessively corroded top strut mount area |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded top strut mount area |2.4.A.3|1
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill hold |6.1.B.2|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing at strut top (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing at strut top (5.3.6 (a) (i))1
Offside Rear Upper Anti-roll bar ball joint excessively worn detached (5.3.4 (a) (i))1
Nearside Front Direction indicator not working Wing repeater not working (4.4.1 (a) (ii))1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis leg corroded (6.2.2 (d) (i))1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Floor corroded (6.2.2 (d) (i))1
Offside Front Brake disc significantly and obviously worn inner surface (1.1.14 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch/chassis (5.3.6 (a) (i))1
Exhaust emissions likely to be affected by an exhaust leak backbox and centre section join leaking significantly (8.2.1.1 (b))1
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed and corroded (7.1.1 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed and corroded (7.1.1 (a) (i))1
Nearside Front Subframe mounting prescribed area is excessively corroded Rear mounting chassis corroded |2.4.A.3|1
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded Vehicle structure corroded |5.2.6|1
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded Vehicle structure corroded |5.2.6|1
Nearside Front Power steering component|s| leaking |2.3.3b|1
Nearside Seat belt has a cut which has significantly weakened the webbing |5.2.2a|1
Nearside Rear Anti-roll bar linkage insecure catching on coil spring |2.4.G.1|1
Nearside Anti-roll bar insecure |2.4.G.1|1
Offside Anti-roll bar insecure |2.4.G.1|1
Emissions not tested Exhaust leaking (8.2.1.2 (d))1
Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1|1
Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering floor to sill |6.1.A.1|1
Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering floor near rear chassis leg |6.1.A.1|1
Headlamp not working on dipped beam os |1.7.5a|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings os sill x2 |6.1.B.2|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill corroded and holed (7.1.1 (a) (i))1
Nearside Front Front suspension locking device ineffective lower ball joint |2.5.A.4|1
Offside Front Front suspension locking device ineffective lower ball joint |2.5.A.4|1
Nearside Rear Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))1
Offside Front Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))1
Offside Rear Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill. |6.1.B.2|1
Exhaust has a major leak of exhaust gases back box. |7.1.2|1
Emissions not tested major exhaust blow. |7.4.B.1|1
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||1
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||1
Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||1
Offside Front Seat belt stitching badly frayed |5.2.2b|1
Engine MIL inoperative or indicates a malfunction on dashboard (8.2.1.2 (h))1
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded inner wing |3.6.C.3|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill |x2| |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arches |2.4.A.3|1
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting corner of sill/wheel arch (6.2.2 (d) (i))1
Offside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill, central, large hole in floor (6.2.2 (d) (i))1
Offside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting along chassis rail marked in yellow (6.2.2 (d) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to anti roll bar mounting (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor corroded (7.1.1 (a) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arches (6.1.1 (c) (i))1
Nearside Outer Seat belt anchorage prescribed area is inadequately repaired outer sills (7.1.1 (a) (i))1
Offside Outer Seat belt anchorage prescribed area is inadequately repaired outer sill (7.1.1 (a) (i))1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill (5.3.6 (a) (i))1
Nearside Inner Rear Brake lining|s| less than 1.5 mm thick |3.5.1g|1
Offside Inner Rear Brake lining|s| less than 1.5 mm thick |3.5.1g|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at spring mount (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))1
Offside Seat belt anchorage prescribed area is excessively corroded sill holed and corroded within 30cm of seatbelt mounting |5.2.6|1
Central Exhaust has a major leak of exhaust gases at join |6.1.2 |a||1
Nearside Front Suspension component mounting prescribed area is inadequately repaired Strut top area |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area is inadequately repaired |5.3.6 |a| |i||1
Suspension arm corroded and seriously weakened both rear lower arms |2.4.G.1|1
Steering system excessively tight |2.2.D.1|1
Anti-roll bar has excessive play in a ball joint |2.4.G.2|1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing/chassis (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing/chassis (5.3.6 (a) (i))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill/wing (6.1.1 (c) (i))1
Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/wing (6.1.1 (c) (i))1
Steering component modified such that the steering is adversely affected hydraulic handbrake fitted, lever too close to steering wheel make steering operation unsafe (2.1.3 (f) (ii))1
Nearside Rear Rear reflector missing tail lights excessively tinted rendering reflector inneffective (4.8.2 (a) (ii))1
Offside Rear Rear reflector missing tail lights excessively tinted rendering reflector inneffective (4.8.2 (a) (ii))1
Rear All position lamps have a product on the lenses or light sources which significantly reduces light intensity both rear lenses excessively tinted (4.2.3 (b) (ii))1
Emissions not tested test abandoned due to vehicle overheating. Lambda reading high prior to stopping test (8.2.1.2 (d))1
Rear Brake pipe likely to become detached or damaged all brake pipes, rigid and flexi insecure (1.1.11 (d) (ii))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength boot floor corroded and holed (5.3.6 (a) (i))1
Rear Prop shaft securing bolt missing (6.1.7 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded and holed (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch corroded and holed (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top mount x3 (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top mount x3 (5.3.6 (a) (i))1
Nearside Seat belt anchorage prescribed area is inadequately repaired inner siil (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area is inadequately repaired inner sill (7.1.1 (a) (i))1
Offside Suspension component mounting prescribed area is excessively corroded backing sill |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassie |2.4.A.3|1
Nearside Rear Trailing arm corroded and seriously weakened |2.4.G.1|1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch (6.2.2 (d) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sills |7.1.1 |a| |i||1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sills |7.1.1 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sills |7.1.1 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sills |7.1.1 |a| |i||1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i||1
Nearside Front Anti-roll bar linkage has excessive play in a ball joint Drop link. |2.4.G.2|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor. Marked in YELLOW. |6.1.B.2|1
Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill. Marked in YELLOW. |6.1.B.2|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill next to A-post |6.1.B.2|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill next to A-post |6.1.B.2|1
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill and floor |2.4.A.3|1
Suspension component mounting prescribed area is excessively corroded n/s/r inner and outer sill |2.4.A.3|1
Position lamp not working Both front (4.2.1 (a) (ii))1
Rear Exhaust has a major leak of exhaust gases Rear section is missing (6.1.2 (a))1
Offside Front Road wheel more than one fixing missing |5.2.1 |a| |ii||1
Nearside Suspension component mounting prescribed area is excessively corroded outer sill at front |2.4.A.3|1
Offside Suspension component mounting prescribed area is excessively corroded outer sill at front |2.4.A.3|1
Offside Suspension component mounting prescribed area is excessively corroded inner sill backing at front |2.4.A.3|1
Offside Suspension component mounting prescribed area is excessively corroded inner sill backing at rear |2.4.A.3|1
Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` items hanging on interior mirror |8.3.1b|1
Offside Rear Shock absorber has negligible damping effect |2.7.5|1
Offside Rear Brake pipe inadequately supported |3.6.B.1|1
Offside Rear Brake pipe inappropriately repaired |3.6.A.3|1
Offside Fuel pipe insecure |7.2.1|1
Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Front Additional braking device component|s| insecure |3.6.I.1|1
Offside Front Additional braking device component|s| insecure |3.6.I.1|1
Brake pedal does not operate a brake fitted to each wheel |3.3.A.3|1
Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Nearside & Offside sills |6.1.B.2|1
Brake pipe leaking T piece to nearside rear flexi |3.6.A.1|1
Nearside Front Power steering pipe|s| or hose|s| excessively corroded |2.3.2|1
Nearside Rear Brake cable damaged (1.1.15 (a))1
Offside Rear Brake cable damaged (1.1.15 (a))1
Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))1
Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill/floor corroded (7.1.1 (a) (i))1
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill / floor (6.1.1 (c) (i))1
Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch |6.1.A.1|1
Offside Front Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired chassis leg holed at roll bar mounting (6.2.2 (d) (ii))1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg holed within suspension mount top and bottom (6.2.2 (d) (i))1
Drivers view of the road through the swept area of the windscreen materially affected by an obstruction sun visor loose (3.1 (a) (ii))1
Offside Front Lower Suspension arm pin or bush excessively worn front bush (5.3.4 (a) (i))1
Offside Front Lower Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))1
Offside Rear Anti-roll bar synthetic mounting deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Front Seat belt anchorage prescribed area is excessively corroded sill to floor |5.2.6|1
Front Inner Subframe mounting prescribed area is excessively corroded both lower sills |2.4.A.3|1
Rear Upper Suspension arm corroded and seriously weakened both |2.4.G.1|1
Power steering pipe/hose leaking metal pipe across the front subframe (2.1.5 (a))1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill panel (6.1.1 (c) (i))1
Nearside Rear Upper Anti-roll bar linkage insecurely attached nut loose (5.3.3 (a) (i))1
Nearside Rear Upper Coil spring mounting insecure (5.3.1 (a) (i))1
Offside Rear Upper Coil spring mounting insecure (5.3.1 (a) (i))1
Nearside Rear Outer Suspension arm pin or bush excessively worn x2 (5.3.4 (a) (i))1
Nearside Side repeater excessively deteriorated so that it is not visible from a reasonable distance |1.4.A.2e|1
Offside Rear Inner brake disc in such a condition that it is seriously weakened face |3.5.1i|1
Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected arch (5.3.6 (a) (ii))1
Nearside Front Inner Floor excessively deteriorated floor sill area (6.2.4 (a) (i))1
Offside Front Floor excessively deteriorated floor sill area (inadequate patch repair) (6.2.4 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill area |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill to wheelarch |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill to wheelarch |5.2.6|1
Offside Front Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor area |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded chassis |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill marked with yellow chalk (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill marked with yellow chalk (5.3.6 (a) (i))1
Centre Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` removed mirror hanging ornament |8.3.1e|1
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3|1
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded Strut top mounting /inner wheel arch |2.4.A.3|1
Offside Front Inner Suspension component mounting prescribed area is excessively corroded Strut top mounting/Inner wheel arch |2.4.A.3|1
Power steering pipe/hose leaking Lower pipe to rack (2.1.5 (a))1
Offside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2|1
Offside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is fractured |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded floor area |2.4.A.3|1
Offside Rear Anti-roll bar corroded and seriously weakened mount |2.4.G.1|1
Suspension component mounting prescribed area is excessively corroded both rear inner sills at suspension mounts |2.4.A.3|1
Offside Rear Inner Suspension arm corroded and seriously weakened |2.4.G.1|1
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3|1
Wheel nut|s| missing 1 wheel nut missing on each wheel |4.2.A.1e|1
Offside Front Suspension spring mounting prescribed area is excessively corroded Rear of spring top area |2.4.A.3|1
Offside Front Subframe mounting prescribed area is excessively corroded Chassis leg |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded Inner sill and floor |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Inner sill and floor |5.2.6|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and chassis leg /before suspension arm (5.3.6 (a) (i))1
Nearside Rear Floor excessively deteriorated boot/floor behind bumper (6.2.4 (a) (i))1
Offside Rear Floor excessively deteriorated boot/floor behind bumper (6.2.4 (a) (i))1
Offside Front Upper Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under bonnet (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under bonnet (5.3.6 (a) (i))1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))1
Offside Inner Front Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Nearside Front Outer Integral body structure has excessive corrosion which adversely affects braking or steering sill (6.1.1 (c) (ii))1
Nearside Rear Integral body structure has excessive corrosion which adversely affects braking or steering arch (6.1.1 (c) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/floor area (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area (5.3.6 (a) (i))1
Offside brake disc excessively scored |3.5.1h|1
Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength behind head light |5.3.6 |a| |i||1
Rear Service brake excessively binding near side and off side |1.2.1 |f||1
Nearside Rear Coil spring missing and directional control affected (5.3.1 (c) (ii))1
Offside Rear Coil spring missing and directional control affected (5.3.1 (c) (ii))1
Parking brake inoperative on one side No park brake reading at rear wheels (1.4.1 (a))1
Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering rear top strut mounting (6.1.1 (c) (ii))1
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill front and rear |6.2.2 |d| |i||1
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill front and rear |6.2.2 |d| |i||1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill / arch |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill / arch |5.2.6|1
Nearside Front Subframe mounting prescribed area is fractured chassis |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis arb mount |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis arb mount |2.4.A.3|1
Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corroded and holed |6.1.B.2|1
Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corroded and holed |6.1.B.2|1
Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corroded and holed |6.1.B.2|1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill (6.2.2 (d) (i))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Floor panel |5.3.6 |a| |i||1
Nearside Rear Lower Suspension arm likely to become detached |5.3.3 |a| |ii||1
Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength boot floor at shock absorber |5.3.6 |a| |i||1
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength boot floor |5.3.6 |a| |i||1
Nearside Front Anti-lock braking system component missing |3.4.2|1
Offside Front Suspension component mounting prescribed area is excessively corroded inner wing at top strut mounting |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg at suspension arm |2.4.A.3|1
Offside Rear Suspension arm severely distorted |2.4.G.1|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Strut mount |6.1.B.2|1
Nearside Rear Upper Suspension arm worn and seriously weakened |2.4.G.1|1
Offside Seat belt anchorage prescribed area is excessively corroded outer sill at rear wheel arch |5.2.6|1
Offside Front Braking system leaking where banjo bolt joins caliper seeping when under pressure |3.6.A.1|1
Rear Oil leaking excessively from transmission diff |8.4.1 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing 3 areas marked white (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing strut mount marked in white (5.3.6 (a) (i))1
Nearside Rear Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Front Lower Anti-roll bar linkage fractured |2.4.G.1|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/floor |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/floor |5.3.6 |a| |i||1
Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded chassie leg |2.4.A.3|1
Nearside Front Power steering pipe|s| or hose|s| leaking from a seal at steering rack |2.3.3b|1
Offside Front Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.5 |b| |i||1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sills |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sills |6.1.B.2|1
Rear Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3|1
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill x2 (6.1.1 (c) (i))1
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))1
Offside Front Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced main chassis (6.1.1 (c) (i))1
Nearside Front Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced main chassis (6.1.1 (c) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch main chassis (5.3.6 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch main chassis (5.3.6 (a) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i||1
Front Position lamp not working |4.2.1 |a| |ii||1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to floor |5.3.6 |a| |i||1
Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Sill (6.2.2 (d) (ii))1
Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Chassis leg (6.2.2 (d) (ii))1
Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Chassis leg (6.2.2 (d) (ii))1
Nearside Rear Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2|1
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Osr outer sill. Advise inner sill |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Outer & inner sill |5.3.6 |a| |i||1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Advise general rust and corrosion elsewhere |6.1.1 |c| |ii||1
Nearside Rear Anti-roll bar linkage ball joint likely to become detached Is detatched |5.3.4 |a| |ii||1
Nearside Front Steering locking device insecure |2.2.C.1g|1
Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii||1
Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering outter sill corroded chalk |6.1.1 |c| |ii||1
Offside Vehicle structure has excessive corrosion which adversely affects braking or steering outter sill corroded chalked |6.1.1 |c| |ii||1
Nearside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill corroded chalked |6.1.1 |c| |ii||1
Offside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill corroded chalked |6.1.1 |c| |ii||1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor/sill |6.1.B.2|1
Offside Suspension component mounting prescribed area is excessively corroded chassis at 2 sections |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded under floor |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded under floor |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded under floor |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded under floor |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded under wheel arch |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded under wheel arch |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded under wheel arch |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded under wheel arch |2.4.A.3|1
Centre Lower Body insecure and dangerous to other road users |6.1.B.1b|1
Offside Inner Seat belt anchorage likely to become detached in the event of a collision sill complete |7.1.1 |a| |ii||1
Nearside Front Suspension component mounting prescribed area is excessively corroded top strut housing |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3|1
Power steering malfunctioning noisey |2.3.3a|1
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))1
Nearside Rear Outer Integral body structure inadequately repaired such that structural rigidity is significantly reduced sill (6.1.1 (d) (i))1
Offside Rear Outer Integral body structure inadequately repaired such that structural rigidity is significantly reduced sill (6.1.1 (d) (i))1
Nearside Rear Outer Seat belt anchorage prescribed area is inadequately repaired sill |5.2.6|1
Nearside Front Suspension rod attachment bracket/mounting fractured drop link (5.3.3 (b) (ii))1
Offside Front Anti-roll bar attachment bracket/mounting insecure Drop link. |5.3.3 |a| |i||1
Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Jacking point (6.1.1 (c) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg in wheel arch (6.1.1 (c) (i))1
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Corrosion on boot floor (6.1.1 (c) (i))1
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Hole in battery tray (6.1.1 (c) (i))1
Offside Rear Anti-roll bar attachment bracket/mounting insecure ARB mounting snapped (5.3.3 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Marked in yellow |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded Marked in yellow |5.2.6|1
Brake pipe leaking on an air braking system rear crossover (1.1.11 (b) (i))1
Offside Front Anti-roll bar has excessive play in a ball joint drop link |2.4.G.2|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis outrigger |6.1.B.2|1
Front Position lamp not working Both (4.2.1 (a) (ii))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill area (6.2.2 (d) (i))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill area (6.2.2 (d) (i))1
Offside Rear Bumper insecure (6.1.4 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides outer sill panels (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides inner sill/floor panels (5.3.6 (a) (i))1
Nearside Subframe mounting prescribed area is excessively corroded Outer & Inner Sill/Floorpan |2.4.A.3|1
Offside Front Anti-roll bar linkage fractured Broken |2.4.G.1|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor, inner and outer sill |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded floor, inner and outer sill |5.2.6|1
Offside Front Suspension component mounting prescribed area is excessively corroded inside arch at antiroll bar mount |2.4.A.3|1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch to inner sill corroded (6.1.1 (c) (i))1
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill corroded (6.1.1 (c) (i))1
Nearside Front Road wheel fractured |4.2.B.1a|1
front brake binding o/s/f and n/s/f |3.7.B.1|1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering at inner arch |6.1.A.1|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/f and n/s/f inner wheel arches in sevral places |6.1.B.2|1
Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/floor |6.1.B.2|1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg at top arm |6.1.A.1|1
Offside Front Upper Anti-roll bar insecure ball joint adrift |2.4.G.1|1
Offside Front coil spring corroded so that its cross sectional area is reduced and seriously weakened |2.4.C.1b|1
Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2|1
Nearside Suspension component mounting prescribed area is excessively corroded inner outer sill |2.4.A.3|1
Offside Suspension component mounting prescribed area is excessively corroded inner outer sill |2.4.A.3|1
brake disc in such a condition that it is seriously weakened all 4 |3.5.1i|1
Nearside Front Suspension component mounting prescribed area is excessively corroded floor to sill |2.4.A.3|1
Front Upper Suspension component insecurely attached both ball joint split pins (5.3.3 (a) (i))1
Offside Rear Parking brake lever has no reserve travel |3.1.6b|1
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis to outrigger |5.3.6 |a| |i||1
Subframe mounting prescribed area is excessively corroded near side front box section |2.4.A.3|1
Subframe mounting prescribed area is excessively corroded off side front box section |2.4.A.3|1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings boot well area.within 30 cm of towbar |6.1.B.2|1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings boot well area. Within 30cm of tow bar |6.1.B.2|1
Offside Front Upper Suspension spring mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill to floor |5.2.6|1
Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2|1
Offside Front Anti-roll bar linkage severely distorted |2.4.G.1|1
Nearside Front Suspension component mounting prescribed area is excessively corroded in 3 places |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded in 2 places |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded inner |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded strut turret |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded strut turret |2.4.A.3|1
Offside Outer Seat belt anchorage prescribed area is excessively corroded Cill |5.2.6|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at top mount (5.3.6 (a) (i))1
Nearside Service brake lagging in operation (1.2.1 (d))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in front of upper wishbone |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in front of upper wishbone |5.3.6 |a| |i||1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area |6.1.B.2|1
Body has a sharp edge caused by corrosion engine undersheild corroded and in-secure hanging loose |6.1.C.1|1
Front Power steering pipe|s| or hose|s| excessively corroded around reservoir area |2.3.2|1
Front Power steering pipe|s| or hose|s| leaking below reservoir area |2.3.3b|1
Nearside Front Steering arm has relative movement at its fixings |2.2.B.1h|1
Offside Front Upper Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Front front parking |secondary| brake grabbing severely Wheel binding |3.7.B.6b|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill two areas |6.1.B.2|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2|1
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing |6.2.2 |d| |i||1
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor |6.1.1 |c| |i||1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor and inner sill |6.1.1 |c| |i||1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg |6.2.2 |d| |i||1
Nearside Front Anti-roll bar linkage attachment bracket/mounting fractured |5.3.3 |b| |ii||1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch above inner sill (6.2.2 (d) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill to floor (6.2.2 (d) (i))1
Offside Seat belt anchorage prescribed area is excessively corroded middle + rear inner sill |5.2.6|1
Nearside Front Inner Vehicle structure inadequately repaired such that structural rigidity is significantly reduced Sill. Marked yellow (6.1.1 (d) (i))1
Nearside Rear Inner Vehicle structure inadequately repaired such that structural rigidity is significantly reduced Sill. Marked yellow (6.1.1 (d) (i))1
Offside Front Inner Vehicle structure inadequately repaired such that structural rigidity is significantly reduced Sill, marked yellow (6.1.1 (d) (i))1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting osf inner wing 2 places (6.2.2 (d) (i))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill / wheel arch (6.2.2 (d) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill / wheel arch (6.2.2 (d) (i))1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting boot floor x2 at tow eye (6.2.2 (d) (i))1
Nearside Front Lower Suspension arm ball joint likely to become detached retaining pin missing (5.3.4 (a) (ii))1
Nearside Front Front position lamp|s| adversely affected by the operation of another lamp affected by indicator and front fog lamp |1.1.A.3f|1
Fuel pipe leaking |6.1.3 |b| |i||1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced at inner sill |7.1.1 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced at inner sill |7.1.1 |a| |i||1
Nearside Front Road wheel fixing missing wheel nut |5.2.1 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor (next to nearside front suspension arm rear Mounting ) (5.3.6 (a) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill holed by corrosion (6.1.1 (c) (i))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Various holes caused by corrosion at inner wheel arch (next to suspension strut mounting point) (6.1.1 (c) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Various holes caused by corrosion at inner wheel arch (next to suspension strut mounting point) (6.1.1 (c) (i))1
Drivers airbag missing Aftermarket steering wheel fitted (7.1.5 (a))1
Offside Suspension component mounting prescribed area is inadequately repaired O/S outer and inner sill (5.3.6 (a) (i))1
Suspension component mounting prescribed area is inadequately repaired O/S inner wing area and chassis leg (5.3.6 (a) (i))1
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting within 30 cm seat mount |6.2.2 |d| |i||1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting within 30 cm from seat mount |6.2.2 |d| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))1
Nearside Front Torque/reaction arm missing |2.4.G.1|1
Nearside Front Suspension spring mounting prescribed area is excessively corroded chassie leg |2.4.A.3|1
Offside Front Upper Suspension spring mounting prescribed area is excessively corroded inner wing |2.4.A.3|1
Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3|1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor at boot floor |2.4.A.3|1
Offside Front Inner Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3|1
Offside Front Suspension spring mounting prescribed area is excessively corroded floor section |2.4.A.3|1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassie leg |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded inner wing x5 |2.4.A.3|1
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded inner wing x4 |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing x4 |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch at chassis leg |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch at chassis leg |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded floor behind wheel |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded rear inner sill |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner sill |2.4.A.3|1
Nearside Front Body panel likely to become detached front wing at bottom detached from body (6.2.1 (a) (ii))1
Offside Front Body panel likely to become detached front wing at bottom detached from body (6.2.1 (a) (ii))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength WING (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength WING (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS (5.3.6 (a) (i))1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL/ INNER WHEEL ARCH (5.3.6 (a) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced SILL / INNER WHEEL ARCH (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i))1
Nearside Front Lower Suspension component ball joint likely to become detached LOCKING DEVISE INEFFECTIVE (5.3.4 (a) (ii))1
Offside Front Lower Suspension component ball joint likely to become detached LOCKING DEVICE INEFFECTIVE (5.3.4 (a) (ii))1
Nearside Rear Upper Anti-roll bar linkage has excessive play in a ball joint joint worn on linkage bar. |2.4.G.2|1
Offside Rear Lower Anti-roll bar linkage has excessive play in a ball joint joint on linkage bar. |2.4.G.2|1
Offside Rear coil spring broken broken at base of coil spring. |2.4.C.1a|1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill area corroded. |6.1.B.2|1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL AREA |5.3.6 |a| |i||1
Nearside Suspension component mounting prescribed area is excessively corroded Inner wing |2.4.A.3|1
Offside Suspension component mounting prescribed area is excessively corroded Inner wing |2.4.A.3|1
Nearside Suspension component mounting prescribed area is excessively corroded Inner sill |2.4.A.3|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed at seat belt mounting point |6.1.B.2|1
Offside Front Track rod end loose rack locking nut to track rod end slack |2.2.B.1d|1
Nearside Front Front position lamp|s| incorrect colour light blue and not white |1.1.A.3e|1
Offside Front Front position lamp|s| incorrect colour light blue not white |1.1.A.3e|1
Nearside Front Front position lamp|s| adversely affected by the operation of another lamp light flickering |1.1.A.3f|1
Offside Front Front position lamp|s| adversely affected by the operation of another lamp flickering |1.1.A.3f|1
Offside Rear front brake recording little or no effort |3.7.B.5a|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis next to anti roll bar mount area |2.4.A.3|1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))1
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to inner sill centre section (6.1.1 (c) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill box section (6.1.1 (c) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill box section (6.1.1 (c) (i))1
Nearside Seat belt anchorage prescribed area is fractured |5.2.6|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Mid sill |7.1.1 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Mid sill |7.1.1 |a| |i||1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg in front of offside mounting point |5.3.6 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan (7.1.1 (a) (i))1
Nearside Rear Suspension component mounting prescribed area is excessively corroded floor/ sill |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded floor / sill |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded floor / sill |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded lower wishbone |2.4.A.3|1
Fluid leak harmful to the environment or a risk to other road users power steering |8.4.1 |a| |i||1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing adjacent strut top mounting |5.3.6 |a| |i||1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing adjacent strut top mounting |5.3.6 |a| |i||1
Nearside Front Inner Suspension component mounting prescribed area is inadequately repaired wing / chassis leg adjacent strut top mounting |5.3.6 |a| |i||1
Offside Brake master cylinder/servo mounting prescribed area is excessively corroded front inner wing |1.1.21 |e| |i||1
Nearside Rear Outer Seat belt anchorage prescribed area is inadequately repaired sill section |7.1.1 |a| |i||1
Offside Rear Outer Seat belt anchorage prescribed area is inadequately repaired sill section |7.1.1 |a| |i||1
Nearside Rear Inner Seat belt anchorage prescribed area is inadequately repaired sill section |7.1.1 |a| |i||1
Offside Rear Inner Seat belt anchorage prescribed area is inadequately repaired sill section |7.1.1 |a| |i||1
Offside Rear Upper Suspension arm likely to fail |5.3.3 |b| |ii||1
Nearside Front Subframe mounting prescribed area is inadequately repaired floor |5.3.6 |a| |i||1
Offside Front Subframe mounting prescribed area is inadequately repaired floor |5.3.6 |a| |i||1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg and out rigger |5.3.6 |a| |i||1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg and out rigger |5.3.6 |a| |i||1
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i||1
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i||1
Nearside Rear Inner Seat belt anchorage prescribed area is inadequately repaired arch repair poor |7.1.1 |a| |i||1
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength rearmost mounting area |5.3.6 |a| |i||1
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength rearmost mounting area |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sil |2.4.A.3|1
Nearside Front Inner Subframe mounting prescribed area is excessively corroded sill |2.4.A.3|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing area |6.1.B.2|1
Emissions unable to be completed no cat fitted (8.2.1.2 (d))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing/chassis (6.1.1 (c) (i))1
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded sill corroded/holed |5.2.6|1
Nearside Front Suspension component mounting prescribed area is severely distorted |2.4.A.3|1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill panel corroded. holed (6.1.1 (c) (i))1
Offside Headlamp lens seriously defective light output seriously effected (4.1.1 (b) (ii))1
Nearside Headlamp lens seriously defective light output seriously effected (4.1.1 (b) (ii))1
Rear Parking |secondary brake| on a single line braking system has inadequate effort at a wheel |1.3.1 |a| |i||1
Nearside Front Outer Anti-roll bar ball joint likely to become detached upper |5.3.4 |a| |ii||1
Rear Exhaust has a major leak of exhaust gases exhaust joint |6.1.2 |a||1
Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill by lower mounting bolt |7.1.1 |a| |i||1
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill by mounting bolt |7.1.1 |a| |i||1
Offside Front Anti-roll bar linkage damaged and seriously weakened burst |2.4.G.1|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing under bonnet (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired inner sill |5.2.6|1
Offside Rear Brake pipe leaking front-rear at pipe end |3.6.A.1|1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Sill Backing (7.1.1 (a) (i))1
Offside Front Suspension arm ball joint excessively worn Lower arm ball joint (5.3.4 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced centre & front sill backing corroded through (7.1.1 (a) (i))1
Nearside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|1
Offside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced centre sill |7.1.1 |a| |i||1
Nearside Front Vehicle structure is so deformed it is likely to adversely affect braking or steering |6.1.1 |a| |ii||1
Steering component mounting prescribed area is excessively corroded pas resivour |2.2.C.1h|1
Nearside Front Inner Suspension component mounting prescribed area is inadequately repaired sill/floor |2.4.A.3|1
Nearside Rear Upper Anti-roll bar linkage fractured |2.4.G.1|1
Nearside Rear Anti-roll bar fractured |2.4.G.1|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor corroded |7.1.1 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength boot |5.3.6 |a| |i||1
Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Boot floor and outer quarters (6.2.2 (d) (i))1
Brake pipe leaking on a hydraulic braking system offside front burst during brake test (1.1.11 (b) (ii))1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassi leg |6.1.A.1|1
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill and nsr floor |6.1.A.1|1
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill and floor behind sill |6.1.A.1|1
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting boot floor, below battery (6.2.2 (d) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body leg (5.3.6 (a) (i))1
Offside Rear Anti-roll bar linkage pin or bush excessively worn bush (5.3.4 (a) (i))1
Offside Front Anti-roll bar linkage attachment bracket/mounting fractured |5.3.3 |b| |ii||1
Nearside Rear Anti-roll bar modified so the suspension is likely to fail other components catching rear spring |5.3.3 |c| |ii||1
Offside Rear Anti-roll bar has an unsafe modification catching and wearing rear subframe |5.3.3 |c| |i||1
Offside Rear Seat belt anchorage prescribed area is excessively corroded floor/sill |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor/sill |5.2.6|1
Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired |6.2.2 |d| |ii||1
Nearside Front Inner Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired wing |6.2.2 |d| |ii||1
Offside Front Inner Cab or chassis has excessive corrosion to the extent that overall security or stability of the cab is impaired wing |6.2.2 |d| |ii||1
Nearside Front Suspension component mounting prescribed area is excessively corroded floor x2 |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded floor x1 |2.4.A.3|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings within 30 cm off n/s/f engine mount and shock absorber |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings corrosion on the sill |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings corrosion on sill |6.1.B.2|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind wheel (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind wheel (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in front of wheel (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in front of wheel (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in front of wheel (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above wheel (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above wheel (5.3.6 (a) (i))1
Rear Exhaust system insecure box clamp missing (6.1.2 (a))1
Offside Headlamp aim not tested needs a polish below retest (4.1.2 (b))1
Headlamp aim projected beam image is obviously incorrect lens needs a polish (4.1.2 (c))1
Rear Exhaust system insecure box no clamp (6.1.2 (a))1
Nearside front brake binding (3.7.B.1)1
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner and outer seal (5.2.6)1
Nearside Front Steering system fouling plastic trim on steering rack boot (2.2.D.2a)1
Offside Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill panel (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill panel (7.1.1 (a) (i))1
front brake grabbing severely |3.7.A.2b|1
Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sill/floor area |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area |6.1.B.2|1
Nearside Front Subframe mounting prescribed area is excessively corroded outter sill |2.4.A.3|1
Offside Front Subframe mounting prescribed area is excessively corroded outter sill |2.4.A.3|1
Offside Rear Subframe mounting prescribed area is excessively corroded outter sill |2.4.A.3|1
Nearside Rear Tie bar/rod has excessive play in a pin/bush |2.4.G.2|1
Nearside Inner Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Inner Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing at strut mount |6.1.B.2|1
Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wing at strut mount |6.1.B.2|1
Nearside Front Suspension spring mounting prescribed area is excessively corroded chassis under bonnet |2.4.A.3|1
Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wing |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch has 2 holes |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded inner arch has 2 holes |2.4.A.3|1
Offside Seat belt anchorage prescribed area is excessively corroded Inner sill |5.2.6|1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing |5.3.6 |a| |i||1
Offside Rear Seat belt anchorage prescribed area is excessively corroded sill holed |5.2.6|1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering floor holed |6.1.A.1|1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front inner valances |5.3.6 |a| |i||1
Central Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s/f chassis |5.3.6 |a| |i||1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s/ front chassis |5.3.6 |a| |i||1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger |6.1.1 |c| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing holed at two points near strut top mount (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing holed at point near strut top mount (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor foot well holed (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor foot well holed (5.3.6 (a) (i))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed (7.1.1 (a) (i))1
Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced under sill holed (7.1.1 (a) (i))1
Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced undr sill (7.1.1 (a) (i))1
Nearside Front Lower Suspension arm which is adjustable, loose in adjustment threads |2.4.G.1|1
Headlamp excessively deteriorated so that the light output is severely reduced BOTH |1.7.5a|1
brake disc inappropriately repaired BOTH SIDES REAR WRONG SIZE |3.5.1n|1
Offside Rear Floor excessively deteriorated Boot compartment floor holed (6.2.4 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill holed (5.3.6 (a) (i))1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear arch |6.1.B.2|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under floor |6.1.B.2|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under/outer sill |6.1.B.2|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under bonnet inner wing |6.1.B.2|1
Nearside Seat belt anchorage prescribed area is excessively corroded under floor |5.2.6|1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under body |6.1.B.2|1
Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2|1
Nearside Rear Suspension arm corroded and seriously weakened wishbone |2.4.G.1|1
Offside Rear Suspension arm corroded and seriously weakened wishbone in various places |2.4.G.1|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner chassis leg marked with yellow chalk |6.1.B.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill marked with chalk |6.1.B.2|1
Offside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel Arch Area (6.1.1 (c) (i))1
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Boot Floor (6.1.1 (c) (i))1
Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Front Upper Suspension arm locating pin locking device missing |2.4.G.3b|1
Offside Front Steering system fouling |2.2.D.2a|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg, under side |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis near suspension mounting |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg under wheel arch |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg under wheel arch |2.4.A.3|1
Nearside Rear Brake cable has restricted free movement |1.1.15 |e||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed (7.1.1 (a) (i))1
Exhaust has a major leak of exhaust gases Where center pipe meets back box |6.1.2 |a||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by where anti-roll bar bolts |5.3.6 |a| |i||1
Service brake juddering severely |3.7.C.2|1
Suspension component mounting prescribed area is excessively corroded both front |anti-roll bar mounts| |2.4.A.3|1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced marked white (6.1.1 (c) (i))1
Seat belt anchorage prescribed area strength or continuity significantly reduced nearside rear inner sill |7.1.1 |a| |i||1
Offside Rear Anti-roll bar fractured |2.4.G.1|1
Offside Front Upper coil spring cracked |2.4.C.1a|1
Nearside Rear Upper coil spring cracked |2.4.C.1a|1
Nearside Front Brake hose damaged and likely to fail leaking (1.1.12 (a))1
Central Rear Exhaust has a major leak of exhaust gases pipe |6.1.2 |a||1
Rear Exhaust has a major leak of exhaust gases tail pipe |6.1.2 |a||1
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii||1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected lower wing |5.3.6 |a| |ii||1
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected floor |5.3.6 |a| |ii||1
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill |5.3.6 |a| |ii||1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected lower wing |5.3.6 |a| |ii||1
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected floor |5.3.6 |a| |ii||1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis |5.3.6 |a| |ii||1
Rear Anti-roll bar linkage has excessive play in a ball joint both |2.4.G.2|1
Nearside Rear Lower Suspension arm attachment bracket/mounting nut missing front inner mounting |2.4.G.1|1
Nearside Rear Lower Suspension arm locating pin locking device not properly locked inner front mounting bolt |2.4.G.3b|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill inner outer |2.4.A.3|1
Front Suspension component mounting prescribed area is excessively corroded o/s and n/s wing tops |2.4.A.3|1
Suspension component mounting prescribed area is excessively corroded o/s and n/s outer sills |2.4.A.3|1
Suspension component mounting prescribed area is excessively corroded o/s and n/s inner sills |2.4.A.3|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |under bonnet| |6.1.B.2|1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2|1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2|1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2|1
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Rear All position lamps not working |1.1.A.3b|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by anti roll bar main mounting (5.3.6 (a) (i))1
Offside Brake hose twisted |found during steering lock to lock check| |2.2.D.2b|1
Front Windscreen wiper blade missing (3.4 (b) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper suspension mount (5.3.6 (a) (i))1
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt split |5.3.4 |b| |ii||1
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt split |5.3.4 |b| |ii||1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced corodded to excess |holed| |7.1.1 |a| |i||1
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wing /wheel arch |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded inner wing /wheel arch |2.4.A.3|1
Offside Seat belt anchorage prescribed area is excessively corroded sill underside |5.2.6|1
Offside Seat belt anchorage prescribed area is inadequately repaired sill under side |5.2.6|1
Brake performance not tested brake pipe leaking (1.2.1 (g))1
Offside Rear Brake pipe leaking on a hydraulic braking system to flexible hose (1.1.11 (b) (ii))1
Fuel system component leaking fuel filter |7.2.3|1
Front Brake fluid significantly below minimum mark (1.1.10 (d) (ii))1
Nearside Rear Stop lamp(s) all not working (4.3.1 (a) (iii))1
Front Brake hydraulic reservoir cap missing (1.1.10 (e))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor |5.3.6 |a| |i||1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Battery tray (6.1.1 (c) (i))1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to sill |6.1.B.2|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill |7.1.1 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill |7.1.1 |a| |i||1
Position lamp not working both front |4.2.1 |a||1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both rear outer sills |6.2.2 |d| |i||1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill / floor |6.1.B.2|1
Offside Rear Position lamp lens seriously defective |4.2.1 |b||1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting o/s/f and n/s/f inner wings |6.2.2 |d| |i||1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting o/s/r and n/s/r outer sills |6.2.2 |d| |i||1
Offside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor at seat |6.2.2 |d| |i||1
Nearside Headlamp missing |1.7.3|1
Nearside Front Direction indicator missing |1.4.A.2b|1
Offside Rear Brake back plate|s| securing device missing |3.5.1j|1
Suspension component mounting prescribed area is excessively corroded nearside front floor holed |2.4.A.3|1
Seat belt anchorage prescribed area is excessively corroded nearside inner sill holed |5.2.6|1
Seat belt anchorage prescribed area is excessively corroded nearside rear inner sill holed |5.2.6|1
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i||1
Exhaust emissions likely to be affected by an exhaust leak leaking from back box joint/flange (8.2.2.1 (b))1
Front Position lamp not working both fronts (4.2.1 (a) (ii))1
Coil spring fractured or broken both rear |5.3.1 |b| |i||1
Side repeater incorrect colour O/S & N/S (4.4.3 (a))1
Front Service brake excessively fluctuating Both (1.2.1 (e))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Strut tower area, marked with chalk (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Strut tower area, marked with chalk (5.3.6 (a) (i))1
Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill, marked with chalk (6.1.1 (c) (i))1
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill, marked with chalk (6.1.1 (c) (i))1
Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill, marked with chalk (6.1.1 (c) (i))1
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill, marked with chalk (6.1.1 (c) (i))1
Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill, marked with chalk (6.1.1 (c) (i))1
Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill, marked with chalk (6.1.1 (c) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor, marked with chalk (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor, marked with chalk (6.1.1 (c) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch, marked in chalk (5.3.6 (a) (i))1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength 2 holes (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Under wheel arch (6.1.1 (c) (ii))1
Front Brake disc significantly and obviously worn X2 (1.1.14 (a) (i))1
Offside Rear Outer Subframe mounting prescribed area is inadequately repaired Incorrect material used in sill repair (5.3.6 (a) (i))1
Nearside Rear Outer Subframe mounting prescribed area is inadequately repaired Incorrect material used in sill repair (5.3.6 (a) (i))1
Rear Anti-roll bar linkage worn and seriously weakened |2.4.G.1|1
Coil spring fractured or broken both sides front and rear. all four springs broken (5.3.1 (b) (i))1
Offside Front Anti-roll bar linkage has excessive play in a ball joint broken |2.4.G.2|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by anti-roll bar mounting (5.3.6 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill / floor area (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill / floor (7.1.1 (a) (i))1
Rear Exhaust has a major leak of exhaust gases middle to rear joint |6.1.2 |a||1
Emissions not tested idle and rpm not stable (8.2.1.2 (d))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill areas (7.1.1 (a) (i))1
Brake performance not tested leaking (1.2.1 (g))1
Brake pipe at imminent risk of failure or fracture main to rear fractured/corroded (1.1.11 (a))1
Offside Front Subframe mounting prescribed area is excessively corroded inner wing chassis section |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is inadequately repaired sill corroded |5.3.6 |a| |i||1
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced central chassi front floor area |6.1.1 |c| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi under arch |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi under arch |5.3.6 |a| |i||1
Centre Brake pipe inadequately clipped |3.6.B.1|1
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor (7.1.1 (a) (i))1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor (7.1.1 (a) (i))1
Seat belt anchorage prescribed area strength or continuity significantly reduced both outer sills |7.1.1 |a| |i||1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to floor (6.1.1 (c) (i))1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering above suspension wish bone (6.1.1 (c) (ii))1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering above suspension wish bone (6.1.1 (c) (ii))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill and floor |6.2.2 |d| |i||1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill and floor |6.2.2 |d| |i||1
Centre Rear Rear fog lamp not working |1.3.2b|1
Emissions not tested engine overheated |7.3.A.1|1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill pannel (6.1.1 (c) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill pannel (6.1.1 (c) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill pannel (6.1.1 (c) (i))1
Exhaust catalytic converter missing where one was fitted as standard |8.2.2.1 |a||1
Exhaust has a major leak of exhaust gases Center to rear exhaust box (6.1.2 (a))1
Nearside Front Steering system lock to lock check twists a brake pipe |2.2.D.2b|1
Headlamp aim not tested |4.1.2 |b||1
Front Headlamp lens seriously defective |4.1.1 |b| |ii||1
Front Headlamp lens seriously defective (4.1.1 (b) (ii))1
Headlamp aim not tested head lamp lens poor condition (4.1.2 (b))1
Offside Front Suspension component mounting prescribed area is excessively corroded inner wing within the |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill back |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill back |7.1.1 |a| |i||1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre floor (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top of chassis leg in engine bay |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg around anti roll bar mount |5.3.6 |a| |i||1
Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill corroded (7.1.1 (a) (i))1
Offside Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii))1
Offside Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill to floor (5.3.6 (a) (ii))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced SILL |7.1.1 |a| |i||1
Offside Rear Upper Suspension component pin or bush excessively worn |5.3.4 |a| |i||1
Offside Rear Upper Suspension arm pin or bush excessively worn both inner bushes (5.3.4 (a) (i))1
Offside Front Tie bar/rod attachment bracket/mounting cracked |2.4.G.1|1
Service brake excessively binding both fronts (1.2.1 (f))1
Nearside Steering rack insecure |2.2.B.1a|1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced on inner lower sill at rear |7.1.1 |a| |i||1
Rear Anti-roll bar linkage ball joint excessively worn both sides |5.3.4 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chasis area. (5.3.6 (a) (i))1
Offside Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides chassis rails by (d)bushes (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail under bonnet (6.1.1 (c) (i))1
Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides wing to sills (6.1.1 (c) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to inner sill (6.1.1 (c) (i))1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to inner sill (6.1.1 (c) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor by battery (6.1.1 (c) (i))1
Rear Brake pipe inadequately clipped front to rear |3.6.B.1|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassie (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to sill (6.1.1 (c) (i))1
Nearside Front Upper Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3|1
Offside Front Upper Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3|1
Offside Headlamp aim unable to be tested No beam pattern. (4.1.2 (b))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded at sill |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded at sill |5.2.6|1
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|1
Nearside Front Direction indicators incorrect colour |1.4.A.2f|1
Offside Front Direction indicators incorrect colour |1.4.A.2f|1
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill holed marked with chalk (6.2.2 (d) (i))1
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis near anti rollbar bracket |5.3.6 |a| |i||1
Rear Brake pipe connection leaking on a hydraulic braking system (1.1.11 (b) (ii))1
Nearside Front Suspension component mounting prescribed area is excessively corroded Chassis/anti roll bar mount |2.4.A.3|1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill has corroded hole |6.1.1 |c| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill has corroded hole |6.1.1 |c| |i||1
Nearside Side repeater has a product on the lens so it is not visible from a reasonable distance |1.4.A.2e|1
Offside Side repeater has a product on the lens so it is not visible from a reasonable distance |1.4.A.2e|1
Offside Seat belt anchorage prescribed area is fractured FLOOR PAN / SILL DAMAGED FROM UNDER NEATH CAR |5.2.6|1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end cap (5.3.6 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill (5.3.6 (a) (i))1
Offside Rear Outer Body panel corroded and likely to cause injury arch (6.2.1 (a) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill and inner arch |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch |7.1.1 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill end (5.3.6 (a) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg lower and outer (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg lower and outer (6.1.1 (c) (i))1
Fuel hose leaking filler |7.2.3|1
Brake lever has insufficient reserve travel hand brake requires service or adjustment (1.1.2 (a))1
Offside Front Anti-roll bar insecure broken |2.4.G.1|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Near front upper suspension arm mounting point |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Near front upper suspension arm mounting point |5.3.6 |a| |i||1
Nearside Front Suspension component ball joint excessively worn |5.3.4 |a| |i||1
Offside Front brake caliper locking device missing |3.5.1l|1
Emissions unable to be completed due to major exhaust leak and catalytic converter missing (8.2.1.2 (d))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded undersill |5.2.6|1
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill, at rear (6.1.1 (c) (i))1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill, at rear (6.1.1 (c) (i))1
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/f inner sill (6.1.1 (c) (i))1
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s/r inner sill (6.1.1 (c) (i))1
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s/f inner sill (6.1.1 (c) (i))1
Nearside Rear Rear position lamp|s| insecure |1.1.A.3a|1
Nearside Front Seat belt anchorage prescribed area is excessively corroded rear outter sill |5.2.6|1
Offside Front Headlamp not working on dipped beam bulb fitted |4.1.1 |a| |ii||1
Offside Rear Anti-roll bar linkage insecure detached |2.4.G.1|1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i))1
Offside Outer Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced under sill (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced under sill (7.1.1 (a) (i))1
Seat belt anchorage prescribed area is excessively corroded nearside sill |5.2.6|1
Seat belt anchorage prescribed area is excessively corroded offside sill |5.2.6|1
Central Rear Stop lamp has less than 50% of the light sources illuminating |1.2.1b|1
Front Seat belt anchorage prescribed area strength or continuity significantly reduced Both sides (7.1.1 (a) (i))1
Offside Rear Upper Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))1
Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner (7.1.1 (a) (i))1
Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Emissions not tested engine miss fireing |8.2.1.2 |d||1
Offside Front Lower Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b|1
Nearside Front Lower Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e|1
Power steering pipe/hose leaking Feed and return pipes leaking to steering rack (2.1.5 (a))1
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced End of sill in inner wheel arch (6.1.1 (c) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill holed (6.1.1 (c) (i))1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced middle inner sill (6.1.1 (c) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced under headlight (6.1.1 (c) (i))1
Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill (6.2.2 (d) (i))1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing (6.1.1 (c) (ii))1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing (6.1.1 (c) (ii))1
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i))1
Nearside Front Passenger`s airbag obviously defective |5.4.1|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill holed and lower body filler breaking away |6.2.2 |d| |i||1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill holed and lower body filler breaking away |6.2.2 |d| |i||1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded and weak (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded and weak (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded and weak (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area is excessively corroded SILL |5.2.6|1
Nearside Front Wheel bolt|s| missing |4.2.A.1e|1
Offside Front Wheel bolt|s| missing |4.2.A.1e|1
Nearside Rear Wheel bolt|s| missing |4.2.A.1e|1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre inner sill |6.1.B.2|1
Offside Direction indicators not working stuck on |1.4.A.2c|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced rear of inner sill |7.1.1 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear of inner sill |7.1.1 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre sill (7.1.1 (a) (i))1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer of chassis leg (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer of chassis leg (6.1.1 (c) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength corrosion going from the rear outer sill to inner sill (chalked) (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (chalked) (7.1.1 (a) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner body has hole (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail at anti roll bar mounting (5.3.6 (a) (i))1
Emissions not tested rear exhaust box full of water |7.3.A.1|1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill area |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill area |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength closing sill area |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheelarch area |5.3.6 |a| |i||1
Exhaust has a major leak of exhaust gases @ rear end of silencer, |7.1.2|1
Emissions not tested excessive blow, |7.3.A.1|1
Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))1
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))1
Nearside Front Suspension arm modified so the suspension is likely to foul other components fouling against shock absorber. (5.3.3 (c) (ii))1
Electrical wiring likely to touch hot or rotating parts rear lamda sensor wire on exhaust. (4.11 (a) (iii))1
Nearside Headlamp light intensity severely reduced dip beam |4.1.4 |a||1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced main chassis near roll bar mounting |6.1.1 |c| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced main chassis near roll bar monting |6.1.1 |c| |i||1
Offside Front Suspension component mounting prescribed area is excessively corroded Chassis corroded as marked |2.4.A.3|1
Nearside Rear coil spring broken snapped off |2.4.C.1a|1
Offside Front Lower Suspension component mounting prescribed area is excessively corroded chassis rail antiroll bar mounting |2.4.A.3|1
Nearside Rear brake caliper leaking leaking from park brake linkage |3.6.A.1|1
Driver`s seat cannot be secured in the upright position. |6.2.A.2|1
Nearside Rear Hydraulic brake calliper leaking seal (1.1.16 (b) (i))1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings N/S/F, N/S/R, O/S/F, O/S/R OUTER SILLS |6.1.B.2|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings O/S/R Sill Corroded Through |6.1.B.2|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings N/S/R Sill Heavily Corroded Affecting The Structural Integrity |6.1.B.2|1
Offside Steering rack insecure |2.2.B.1a|1
Offside Front Subframe mounting prescribed area is excessively corroded chassis section inside arch |2.4.A.3|1
Offside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen |3.5 |a||1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2|1
Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering Inner sill (6.1.1 (c) (ii))1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Chassis (5.3.6 (a) (ii))1
Rear Suspension component mounting prescribed area is excessively corroded both outer sills |2.4.A.3|1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front inner sill and rear inner and outer sill and rear inner arch |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail by anti roll bar |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail is cracked by anti roll bar |5.3.6 |a| |i||1
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded outer sill area |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill has a hole |5.2.6|1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill as marked (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill as marked (6.1.1 (c) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Outerr sill (7.1.1 (a) (i))1
Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch |6.1.1 |c| |ii||1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor by chassis mounting |6.1.1 |c| |i||1
Nearside Rear Seat belt anchorage likely to become detached in the event of a collision (7.1.1 (a) (ii))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer Seal (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Seal (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer Seal (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Seal (7.1.1 (a) (i))1
Nearside Rear Brake hose leaking on a hydraulic braking system ferrule (1.1.12 (c) (ii))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill area by jacking point (6.1.1 (c) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor by jacking point (6.1.1 (c) (i))1
Nearside Front Suspension component mounting prescribed area is fractured chasses by anti roll bar mount |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is fractured chasses by anti roll bar mount |2.4.A.3|1
Subframe mounting prescribed area is excessively corroded both front chassis legs |2.4.A.3|1
Seat belt anchorage prescribed area is excessively corroded outer sills at rear both n/s and o/s |5.2.6|1
Offside Rear Position lamp showing white light to the rear |4.2.3 |a| |ii||1
Offside Stop lamp|s| showing white light to the rear |4.3.3 |a| |ii||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch (6.1.1 (c) (i))1
Offside Front Outer Anti-roll bar attachment bracket/mounting fractured upper ball joint separated |2.4.G.1|1
Nearside Front Subframe mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3|1
Nearside Rear Subframe mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3|1
Offside Front Subframe mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3|1
Offside Rear Subframe mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3|1
Rear Seat belt anchorage prescribed area strength or continuity significantly reduced n/s and o/s inner sills (7.1.1 (a) (i))1
Nearside Front Suspension has inadequate clearance with the chassis anti-roll bar |2.4.A.1a|1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SILL (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis around Anti-Roll bar mounting (5.3.6 (a) (i))1
Nearside Front Lower Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis rail corroded to excess within 30cm of anti roll bar mount (5.3.6 (a) (ii))1
Offside Front Lower Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis rail corroded to excess within 30cm of anti roll bar mounting (5.3.6 (a) (ii))1
Nearside Front Electrical wiring inadequately supported wheel speed sensor |1.9.2a|1
Offside Front Electrical wiring inadequately supported wheel speed sensor |1.9.2a|1
Rear Suspension component mounting prescribed area is excessively corroded both inner wheel arches |2.4.A.3|1
Front position lamp|s| obviously incorrectly positioned both,.. originals not working |1.1.A.3a|1
Nearside Rear Rear reflector missing (4.8.2 (a) (ii))1
Offside Front Inner Integral body structure inadequately repaired such that structural rigidity is significantly reduced sill (6.1.1 (d) (i))1
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))1
Offside Rear Body panel damaged and likely to cause injury sharp edge (6.2.1 (a) (i))1
Front Anti-roll bar ball joint excessively worn links (5.3.4 (a) (i))1
Suspension component ball joint dust cover no longer prevents the ingress of dirt Both nearside front upper and lower (5.3.4 (b) (ii))1
Seat belt anchorage prescribed area strength or continuity significantly reduced offside outer and nearside inner sills (7.1.1 (a) (i))1
Offside Rear Service brake excessively binding disc showing signs of heat transfer |1.2.1 |f||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to bulkhead (5.3.6 (a) (i))1
Coil spring fractured or broken (5.3.1 (b) (i))1
Front Fuel system component leaking |7.2.3|1
Offside Lower Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2|1
Power steering pipe|s| or hose|s| leaking low pressure pipe to rack |2.3.3b|1
Offside Rear Anti-roll bar has excessive play in a ball joint link-bar broken |2.4.G.2|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis box section |2.4.A.3|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced OUTER SILL |7.1.1 |a| |i||1
Central Front Brake lever has insufficient reserve travel (1.1.2 (a))1
Rear Brake lever has insufficient reserve travel (1.1.2 (a))1
Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering chassis behind suspension leg (6.1.1 (c) (ii))1
Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outer sill corroded (6.2.2 (d) (i))1
Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner sill corroded on end (6.2.2 (d) (i))1
Nearside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting small on in floor centre on sill (6.2.2 (d) (i))1
Offside Front Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Nearside Rear Anti-roll bar insecurely attached |5.3.3 |a| |i||1
Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced Outer sill panel . (6.1.1 (a) (i))1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis leg as marked . (6.1.1 (c) (ii))1
Nearside Front Suspension component mounting prescribed area is excessively corroded inner chassis leg |2.4.A.3|1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Upper chassis leg ***DO NOT DRIVE VEHICLE*** (6.1.1 (c) (ii))1
Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis - inner wheel arch |2.4.A.3|1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front of inner sill (6.1.1 (c) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front of inner sill (6.1.1 (c) (i))1
Seat belt anchorage prescribed area strength or continuity significantly reduced nearside rear inner sill corroded |7.1.1 |a| |i||1
Seat belt anchorage prescribed area strength or continuity significantly reduced offside rear outer sill corroded |7.1.1 |a| |i||1
Offside Front Lower Steering linkage ball joint has excessive play (2.1.3 (b) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill holed (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill holed (7.1.1 (a) (i))1
Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill |7.1.1 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch painted white |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch,painted white and inside bonnet compartment painted white |5.3.6 |a| |i||1
Nearside front brake binding CANNOT TURN WHEEL BY HAND |3.7.B.1|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill area |7.1.1 |a| |i||1
Rear Body has a projection caused by corrosion |6.1.C.1|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail by top wishbone mountings (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail by top wishbone mounts (5.3.6 (a) (i))1
Nearside Front Lower Shock absorbers insecurely attached bolt loose (5.3.2 (a) (i))1
Central Exhaust has a major leak of exhaust gases to rear joint corroded |7.1.2|1
Offside Power steering ram|s| leaking from a failed seal |2.3.3b|1
Rear Emissions not tested major exhaust leak |7.3.A.1|1
Offside Rear Upper Suspension arm corroded and seriously weakened Top mounting point detached |5.3.3 |b| |i||1
Front Exhaust system not adequately supported front clamp missing |7.1.1|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill. (7.1.1 (a) (i))1
Body component likely to become detached roof |hard top| |6.2.1 |a| |ii||1
Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i||1
Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i||1
Power steering component fouling and steering adversely affected |2.1.5 |e| |ii||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to inner sill (5.3.6 (a) (i))1
Brake pipe leaking Front to rear steel brake pipe. |3.6.A.1|1
Nearside Outer Suspension component mounting prescribed area is excessively corroded Sill at rear. |2.4.A.3|1
Offside Outer Suspension component mounting prescribed area is excessively corroded Sill at rear . |2.4.A.3|1
Nearside Seat belt anchorage prescribed area is excessively corroded BODY SILL HOLED |5.2.6|1
Nearside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii||1
Nearside Front Suspension component mounting prescribed area is excessively corroded upper arm front mounting |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded upper arm front mounting |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill and rear of o/s floor (7.1.1 (a) (i))1
Nearside Seat belt anchorage prescribed area is excessively corroded Nearside rear outer sill |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded Offside rear outer sill |5.2.6|1
Nearside Seat belt anchorage prescribed area is excessively corroded Inner wheel arch |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded Inner wheel arch |5.2.6|1
Nearside Front Suspension component mounting prescribed area is excessively corroded Chasis leg |inner| |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded Chasis leg |Bottom and Outer| |2.4.A.3|1
Nearside Front Subframe mounting prescribed area is excessively corroded Inner and outer sill |2.4.A.3|1
Nearside Front Lower Suspension arm attachment bracket/mounting insecure (5.3.3 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced door sill corroded |7.1.1 |a| |i||1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill section (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing panel |5.3.6 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch,outer sill and inner sill (7.1.1 (a) (i))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (front floor) (6.1.1 (c) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (outer sill) (6.1.1 (c) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (sill to floor) (6.1.1 (c) (i))1
Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering (floor area) (6.1.1 (c) (ii))1
Nearside Integral body structure has excessive corrosion which adversely affects braking or steering (outer sill area ) (6.1.1 (c) (ii))1
Offside Seat belt anchorage prescribed area is excessively corroded Rear inner wheel arch. |5.2.6|1
Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail above anti roll bar (5.3.6 (a) (i))1
Offside Front Braking system leaking caliper/hose area |3.6.A.1|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength around ARB mounting |5.3.6 |a| |i||1
Front Headlamp cleaning device obviously defective |1.7.2|1
Rear Headlamp cleaning device obviously defective |1.7.2|1
Nearside Front Front passenger door cannot be opened from inside the vehicle |6.2.B.1b|1
Nearside Front Front passenger door cannot be opened from outside the vehicle |6.2.B.1b|1
Offside Brake pipe leaking front to rear brake pipe |3.6.A.1|1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre chassis rail (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to inner arch (5.3.6 (a) (i))1
Offside Front Anti-roll bar attachment bracket/mounting bolt missing bolt sheared |2.4.G.1|1
Emissions not tested running fault (8.2.1.2 (d))1
Nearside Headlamp light intensity severely reduced dip (4.1.4 (a))1
Central Rear Exhaust system insecure hanger broken - exhaust touching rear subframe (6.1.2 (a))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chasse leg-as marked |6.1.1 |c| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chasse leg-as marked |6.1.1 |c| |i||1
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded and outer skin separated from inner (6.1.1 (c) (i))1
Bonnet retaining device ineffective missing cable tied closed |8.4.2|1
Driver`s airbag obviously defective intermitently comes on |5.4.1|1
Offside Front Parking brake inoperative on one side (1.4.1 (a))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill separated (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail next to anti roll bar mounting (5.3.6 (a) (i))1
Offside Rear Rear position lamp|s| incomplete |1.1.4a|1
Nearside Front Radius arm has excessive play in a pin/bush |2.4.G.2|1
Offside Front Radius arm has excessive play in a pin/bush |2.4.G.2|1
Front Brake pipe leaking to rear |3.6.A.1|1
Fuel tank leaking (6.1.3 (b) (i))1
Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed in 2 places |6.1.B.2|1
Nearside Vehicle structure strengthening plate or fastening insecure (6.1.1 (b) (i))1
Offside Vehicle structure strengthening plate or fastening insecure (6.1.1 (b) (i))1
Nearside Rear Brake valve leaking (1.1.7 (d) (i))1
Offside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor pan drivers seat (6.2.2 (d) (i))1
Nearside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor (6.2.2 (d) (i))1
Offside Rear Battery insecure and likely to fall from carrier boot floor (4.13 (a) (ii))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Hole in floor of vehicle by seat mount (seat belt mounted on seat) (7.1.1 (a) (i))1
Seat belt anchorage prescribed area is excessively corroded Both outer sills |5.2.6|1
Seat belt anchorage prescribed area is excessively corroded Both sides rear floor |5.2.6|1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail |6.1.1 |c| |ii||1
Nearside Wheel nut|s| missing |4.2.A.1e|1
Offside Wheel nut|s| missing |4.2.A.1e|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Near upper wishbone (5.3.6 (a) (i))1
Offside Front Hydraulic brake calliper leaking Banjo joint (1.1.16 (b) (i))1
Headlamp has a product on the lens so that the light output is severely reduced Both front (4.1.4 (b))1
Headlamp aim not tested Both front (4.1.2 (b))1
Headlamp aim projected beam image is obviously incorrect Both front (4.1.2 (c))1
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill two holes |5.3.6 |a| |i||1
Exhaust fumes entering cabin (6.1.2 (b) (i))1
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced boot floor underside (6.1.1 (c) (i))1
Exhaust has a major leak of exhaust gases Exhaust broken off after centre silencer |7.1.2|1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering as marked |6.1.A.1|1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering as marked |6.1.A.1|1
Exhaust has a major leak of exhaust gases centre/rear section area. |7.1.2|1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill as marked. |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill as marked. |5.3.6 |a| |i||1
Emissions not tested due to engine misfire (8.2.1.2 (d))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/anti roll bar mounting area (5.3.6 (a) (i))1
Nearside Suspension component insecurely attached subframe mounting bolt broken and missing (5.3.3 (a) (i))1
Offside Suspension component insecurely attached subframe mounting bolt broken and missing (5.3.3 (a) (i))1
Suspension component mounting prescribed area is excessively corroded n/s/r sill |2.4.A.3|1
Suspension component mounting prescribed area is excessively corroded o/s/r sill |2.4.A.3|1
Offside Rear Outer Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill incorrectly welded lower edge |chalked| |6.1.B.2|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wing |6.1.1 |c| |i||1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting 2x holes in sill (6.2.2 (d) (i))1
Nearside Rear Outer Body panel corroded and likely to cause injury seal (6.2.1 (a) (i))1
Offside Rear Outer Body panel corroded and likely to cause injury seal (6.2.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer door sill |5.2.6|1
Offside Rear Anti-roll bar ball joint dust cover missing |5.3.4 |b| |ii||1
Nearside Outer Rear Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|1
Nearside Inner Rear Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|1
Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill and floor (7.1.1 (a) (i))1
Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill and floor (7.1.1 (a) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced next to wheel arch rear (6.1.1 (c) (i))1
Offside Front Brake hose connection leaking on a hydraulic braking system at caliper (1.1.12 (c) (ii))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded (7.1.1 (a) (i))1
Nearside Rear Exhaust has a major leak of exhaust gases joint before back box leaking (6.1.2 (a))1
Nearside Front Headlamp lens seriously defective clouded up (4.1.1 (b) (ii))1
Offside Front Headlamp lens seriously defective clouded up (4.1.1 (b) (ii))1
Headlamp light intensity severely reduced Both lenses opaque (4.1.4 (a))1
Offside Rear Seat belt anchorage prescribed area is inadequately repaired Previous repair weakened by corrosion (7.1.1 (a) (i))1
Parking brake lever defective so that it cannot be satisfactorily operated TRAVEL XS (1.1.6 (d))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing ,anti roll bar mount area holed (5.3.6 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill rusted through (7.1.1 (a) (i))1
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both front inner wheel arch |6.1.1 |c| |i||1
Offside Inner Front Road wheel bead rim badly distorted |4.2.A.1a|1
Exhaust emissions likely to be affected by an exhaust leak centre joints leaking (8.2.1.1 (b))1
Offside Rear Floor excessively deteriorated floor (6.2.4 (a) (i))1
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2|1
Offside Rear Suspension component mounting prescribed area is inadequately repaired sill repair panel weld has become unbonded due corrosion |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front sub frame mounting area |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front sub frame mounting area corroded |5.3.6 |a| |i||1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Anti roll bar mounting (6.1.1 (c) (i))1
Offside Front Bumper damaged and likely to cause injury when grazed or contacted |6.1.4 |a| |i||1
Offside Seat belt anchorage prescribed area is severely distorted outer sill |5.2.6|1
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides inner sill |6.1.B.2|1
Nearside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))1
Offside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))1
Central Rear Exhaust has a major leak of exhaust gases rear box (6.1.2 (a))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill inner sill and floor to sill (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill inner sill and floor to sill (7.1.1 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch (5.3.6 (a) (ii))1
Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch (5.3.6 (a) (ii))1
Nearside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Rear Seat belt anchorage prescribed area strength or continuity significantly reduced both inner sill ends (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER ARCH (5.3.6 (a) (i))1
Nearside Front Lower Power steering pipe|s| or hose|s| excessively corroded next to radiator - leaking fluid |2.3.2|1
Nearside Rear Valve stem seriously damaged perished |4.1.D.1e|1
Offside Rear Valve stem seriously damaged perished |4.1.D.1e|1
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Side sill (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Side sill (5.3.6 (a) (i))1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering top of chassis leg (6.1.1 (c) (ii))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength bottom of battery tray (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor,inner sill and arch (5.3.6 (a) (i))1
Nearside Front Road wheel badly distorted |5.2.2 |c| |i||1
Offside Rear Upper Suspension arm pin or bush excessively worn rear bush-pin (5.3.4 (a) (i))1
Offside Rear Lower Suspension arm pin or bush excessively worn front bush-pin (5.3.4 (a) (i))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i))1
Central Rear Sub-frame attachment bracket/mounting insecure subframe support bracket (5.3.3 (a) (i))1
Offside Rear Battery insecure loose in boot |1.9.1|1
Rear Inner brake disc in such a condition that it is seriously weakened both sides/worn/corroded |3.5.1i|1
Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower sill |6.1.B.2|1
Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill/under filler |6.1.B.2|1
Offside Rear Service brake excessively binding Caliper and pads removed, slider freed and lubricated. |1.2.1 |f||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by sub frame mount under front wheel arch (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail by anti roll bar mount (5.3.6 (a) (i))1
Offside Body component damaged and likely to cause injury mirror casing has sharp edges (6.2.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassic (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassic (5.3.6 (a) (i))1
Rear Exhaust emissions likely to be affected by an exhaust leak lambda reading too high (8.2.1.1 (b))1
Front Service brake has no recorded effort at a wheel (1.2.1 (a) (ii))1
Brake fluid not visible (1.1.10 (d) (iii))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill panel |7.1.1 |a| |i||1
Brake pipe leaking on a hydraulic braking system above rear subframe between brake hoses |1.1.11 |b| |ii||1
Offside Inner Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Front Brake disc contaminated Disc has got hot and turned blue due to brake bind. (1.1.14 (b))1
Rear Inner Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii))1
Suspension arm ball joint dust cover no longer prevents the ingress of dirt both front lower ball joint gaiters split |5.3.4 |b| |ii||1
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outer and inner sill (5.3.6 (a) (i))1
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting centre inner sill section under passenger seat mounting (6.2.2 (d) (i))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch under top seat belt mounting (6.2.2 (d) (i))1
Power steering pipe/hose excessively corroded pipes joining power steering rack excessively corroded |2.1.5 |g| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front chassis member |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front chassis member |5.3.6 |a| |i||1
Offside Front Brake hose connection leaking on a hydraulic braking system at brake caliper |1.1.12 |c| |ii||1
Offside Rear Brake valve leaking such that brake functionality is affected brake caliper (1.1.7 (d) (ii))1
Exhaust has a major leak of exhaust gases centre section |6.1.2 |a||1
Front Brake disc significantly and obviously worn both (1.1.14 (a) (i))1
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door sill (6.1.1 (c) (i))1
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch to door sill (6.1.1 (c) (i))1
Nearside Seat belt anchorage prescribed area is excessively corroded outer body sill / rear side |5.2.6|1
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill. |5.2.6|1
Centre Front Lower Power steering pipe|s| or hose|s| leaking |2.3.3b|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer/inner sill (7.1.1 (a) (i))1
Nearside Front Service brake excessively binding cannot fully inspect wheel bearing (1.2.1 (f))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced BATTERY TRAY IN BOOT (6.1.1 (c) (i))1
Nearside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2|1
Offside Front Body has a sharp edge caused by damage Wing mirror |6.1.C.1|1
Nearside Integral body structure inadequately repaired such that structural rigidity is significantly reduced inner sill hole (6.1.1 (d) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leg |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leg |5.3.6 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed and corroded (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed and corroded (7.1.1 (a) (i))1
Front Headlamp has a product on the lens so that the light output is severely reduced headlamps both sides are affected (4.1.4 (b))1
Offside Front Upper Suspension component ball joint dust cover no longer prevents the ingress of dirt rubber split open (5.3.4 (b) (ii))1
Nearside Front Upper Suspension component ball joint dust cover no longer prevents the ingress of dirt rubber split open (5.3.4 (b) (ii))1
Front Headlamp has a product on the lens so that the light output is severely reduced nearside and offside have no beam image (4.1.4 (b))1
Rear Brake pipe leaking on a hydraulic braking system Front to rear across axle at union to hose (1.1.11 (b) (ii))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill / floor area (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill / floor area (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing / chassis rail (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing / chassis area (5.3.6 (a) (i))1
Rear Exhaust has a major leak of exhaust gases Where it joins to the center section (6.1.2 (a))1
Rear rear brake juddering severely |3.7.A.5b|1
Service brake excessively binding both rears (1.2.1 (f))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasis leg (5.3.6 (a) (i))1
Emissions unable to be completed major exhaust blow (8.2.1.2 (d))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sil |6.2.2 |d| |i||1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sil |6.2.2 |d| |i||1
Nearside Rear Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced Seal plate lose (6.1.1 (b) (ii))1
Nearside Front Anti-roll bar linkage insecurely attached broken |5.3.3 |a| |i||1
Hydraulic fluid leaking excessively Power steering (8.4.1 (a) (i))1
Offside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill and inner sill (5.3.6 (a) (ii))1
Nearside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill (5.3.6 (a) (ii))1
Exhaust has a major leak of exhaust gases centre to rear joint |excessively corroded| |7.1.2|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner arch to inner sill |5.2.6|1
Nearside Rear position lamp|s| adversely affected by the operation of another lamp INDICATOR INTERFERENCE |1.1.A.3f|1
Rear Exhaust has a major leak of exhaust gases box joint corroded away (6.1.2 (a))1
Offside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))1
Front Power steering pipe/hose excessively damaged leak (2.1.5 (g) (i))1
Offside Rear Rear position lamp|s| incorrect colour lense tape applied over damage |1.1.A.3e|1
Nearside Headlamp incorrect colour |1.7.5b|1
Nearside Rear Braking system leaking brake caliper piston |3.6.A.1|1
Offside Headlamp missing |1.7.3|1
Offside Front Direction indicators missing |1.4.A.2b|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail by antiroll bar mount (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired Outer sill |Plate needs rewelding | |7.1.1 |a| |i||1
Nearside Front Anti-roll bar attachment bracket/mounting insecure clamp bolt broken (5.3.3 (a) (i))1
Nearside Headlamp aim projected beam image is obviously incorrect CONTINENTAL HEADLIGHT FITTED (4.1.2 (c))1
Offside Headlamp aim projected beam image is obviously incorrect CONTINENTAL HEADLIGHT FITTED (4.1.2 (c))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer and Inner (7.1.1 (a) (i))1
Nearside Front Upper Suspension component ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||1
Rear Anti-roll bar damaged and seriously weakened (5.3.3 (b) (i))1
Offside Front Anti-roll bar linkage corroded and seriously weakened Nut (5.3.3 (b) (i))1
Exhaust has a major leak of exhaust gases leak so excessive unable to preform emissions test (6.1.2 (a))1
Nearside Rear Upper Suspension arm insecure and impairing directional stability snapped due to excessive corrosion (5.3.3 (a) (ii))1
Emissions not tested insufficient emissions exiting tail pipe due to exhaust blow (8.2.1.2 (d))1
Nearside Brake lever has insufficient reserve travel |1.1.2 |a||1
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))1
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))1
Front Windscreen wiper not working Both (3.4 (a))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner cill (7.1.1 (a) (i))1
Nearside Front Lower Suspension component corroded and seriously weakened ball joint retaining nut (5.3.3 (b) (i))1
Offside Front Lower Suspension component corroded and seriously weakened ball joint retaining nut (5.3.3 (b) (i))1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering under wheel arch |6.1.1 |c| |ii||1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering under wheel arch |6.1.1 |c| |ii||1
Nearside Rear Suspension arm has excessive play in a pin/bush |2.4.G.2|1
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill/Arch (6.1.1 (c) (i))1
Central Front Brake lever has insufficient reserve travel travel on hand brake lever (1.1.2 (a))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded (6.1.1 (c) (i))1
Offside Front Suspension rod ball joint likely to become detached drop link (5.3.4 (a) (ii))1
Offside Rear Outer Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill |6.2.2 |d| |ii||1
Offside Rear Coil spring fractured or broken suspension (5.3.1 (b) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis leg holed by Anti-Roll bar mount (6.2.2 (d) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner/outer cill areas (6.1.1 (c) (i))1
Power steering pipe/hose leaking at rack and poss resivoir (2.1.5 (a))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength bottem of chassis by roll bar bracket (5.3.6 (a) (i))1
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength upper flange area (5.3.6 (a) (i))1
Nearside Front Shock absorbers has an excessively worn bush on arm (5.3.2 (c))1
Brake performance unable to be tested risk of p.s fluid contaminating brake rollers (1.2.1 (g))1
Nearside Front Anti-roll bar missing link |5.3.3 |a| |ii||1
Nearside Rear Suspension arm likely to become detached nut missing |5.3.3 |a| |ii||1
Drivers airbag missing After market steering wheel fitted (7.1.5 (a))1
Drivers seat insecure securing bolts loose (6.2.5 (a) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg in engine bay all around (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg all around (5.3.6 (a) (i))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg all around (6.1.1 (c) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg all around (6.1.1 (c) (i))1
Sub-frame corroded and seriously weakened both (5.3.3 (b) (i))1
Nearside Front Brake hose damaged and likely to fail failed braided hose (1.1.12 (a))1
Nearside Front Brake performance not tested failed braided hose (1.2.1 (g))1
Emissions not tested excessive exhaust blow (8.2.1.2 (d))1
Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting within 30cm of seat belt (6.2.2 (d) (i))1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting within 30cm of structure mount (6.2.2 (d) (i))1
Emissions unable to be completed exhaust gasses over limit (8.2.2.2 (e))1
Exhaust has a part missing |7.1.1a|1
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|1
Nearside Lower Front suspension locking device missing |2.5.A.4|1
Emissions not tested Oil cap Missing - Oil spitting everywhere (8.2.1.2 (d))1
Centre Rear Exhaust has a major leak of exhaust gases gasket |7.1.2|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Rear inner sill (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Rear inner sill (7.1.1 (a) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis rail (6.2.2 (d) (i))1
Front Windscreen damaged and affecting the drivers view of the road (3.2 (a) (ii))1
Exhaust has a major leak of exhaust gases Back box joint to middle section (6.1.2 (a))1
Parking brake lever has excessive movement indicating incorrect adjustment Handbrake has no reserve travel |1.1.6 |c||1
Offside Rear Suspension arm attachment bracket/mounting insecure (5.3.3 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Foward Of Front Subframe (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill / wheel arch (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced undersill area (7.1.1 (a) (i))1
Offside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt boot split (5.3.4 (b) (ii))1
Front Road wheel fixing missing nearside and offside (5.2.1 (a) (i))1
Nearside Windscreen wiper blade missing |8.2.2|1
Offside Windscreen wiper blade missing |8.2.2|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing and chassis at arb mounting area |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing and chassis at arb mounting area |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill area |2.4.A.3|1
Nearside Rear Shock absorber has an excessively worn bush |2.7.4|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i))1
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill corroded at rear (6.2.2 (d) (i))1
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill corroded at rear (6.2.2 (d) (i))1
Headlamp aim beam image obviously incorrect both |1.8.A.1b|1
Rear Upper Suspension arm corroded and seriously weakened both sides |2.4.G.1|1
Offside Rear Lower Suspension arm rubber bush deteriorated resulting in excessive movement front bush |2.4.G.2|1
Offside Rear Body panel damaged and likely to cause injury (6.2.1 (a) (i))1
Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))1
Nearside Rear Anti-roll bar linkage pin or bush likely to become detached nut loose (5.3.4 (a) (ii))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced arch area (7.1.1 (a) (i))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under vehicle (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch / wing above anti roll bar mount |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded inner arch / wing above anti roll bar mount |2.4.A.3|1
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill closing panel |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded sill closing panel |5.2.6|1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under vehicle yellow chalk marked (7.1.1 (a) (i))1
Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction (Phone holder) (3.1 (a) (ii))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill area. (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill area. (7.1.1 (a) (i))1
Offside Rear Suspension arm corroded and seriously weakened top |2.4.G.1|1
Nearside Suspension arm corroded and seriously weakened top (5.3.3 (b) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Hole in sill within 30cm of seat belt anchorage point. (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis sections |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced End of sill leading into bottom of archway |7.1.1 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced End of sill leading into bottom of archway |7.1.1 |a| |i||1
Emissions not tested manifold leaking (8.2.1.2 (d))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner cill/floor area |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under side sill (7.1.1 (a) (i))1
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced offside rear and nearside rear outer sill (6.1.1 (c) (i))1
Power steering component leaking rack |2.1.5 |a||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced at outer sill (7.1.1 (a) (i))1
Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt Outer (5.3.4 (b) (ii))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x3 places (5.3.6 (a) (i))1
Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill / floor / chassis (7.1.1 (a) (i))1
Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill / floor / chassis (7.1.1 (a) (i))1
Driver`s door catch deteriorated so the door cannot be readily opened or closed |6.2.B.2|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under sill corroded (7.1.1 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced door sill |7.1.1 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced middle floor to sill (7.1.1 (a) (i))1
Offside Rear Braking system leaking brake caliper leaking |3.6.A.1|1
Nearside Rear Outer Vehicle structure inadequately repaired such that structural rigidity is significantly reduced sill (6.1.1 (d) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill/wing holed and corroded |6.1.1 |c| |i||1
Offside Rear Seat belt anchorage prescribed area is excessively corroded Corrosion on Offside outer sill within 12 inches of a seatbelt mounting |5.2.6|1
Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both sides inner sill , as marked under car rear (6.2.2 (d) (i))1
Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2|1
Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6|1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i||1
Nearside Indicator tell tale inoperative |1.4.A.2a|1
Offside Front Tie bar/rod attachment bracket/mounting rivet missing drop link missing |2.4.G.1|1
Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|1
Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2|1
Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2|1
Offside Front Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings bulk head |6.1.B.2|1
Front Suspension component mounting prescribed area is excessively corroded x2 wheel archs |2.4.A.3|1
Rear Suspension component mounting prescribed area is excessively corroded x2 wheel archs |2.4.A.3|1
Seat belt anchorage prescribed area is excessively corroded floor multiple places |5.2.6|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe/anti roll bar mount areas chassis/ box section |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar/ subframe mount areas chassis/box section . underneath and on side |5.3.6 |a| |i||1
Offside Front Lower Body panel corroded and likely to cause injury Sill (6.2.1 (a) (i))1
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill. |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded sill. |2.4.A.3|1
Offside Front Headlamp incorrect colour |4.1.4 |a||1
Headlamp aim projected beam image is obviously incorrect offside and nearside (4.1.2 (c))1
Nearside Front brake disc has restricted free movement |3.5.1j|1
Nearside Front Position lamp not working dip beam |4.2.1 |a||1
Road wheel more than one fixing missing one nut from each wheel missing |5.2.1 |a| |ii||1
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded Sill/Arch |2.4.A.3|1
Offside Inner Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6|1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength flitch |5.3.6 |a| |i||1
Offside Front Body has a sharp edge caused by corrosion wing |6.1.C.1|1
Offside Front Lower Front suspension has a suspension lower ball joint securing nut not locked split pin missing |2.5.B.1a|1
Emissions not tested exhaust leak (8.2.1.2 (d))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced near subframe fixing |6.1.1 |c| |i||1
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill holed |5.2.6|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and rear sill marked yellow (inner an outer) (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength marked yellow (inner an outer) (5.3.6 (a) (i))1
Front Power steering pipe/hose corroded such that the steering is adversely affected |2.1.5 |g| |ii||1
Driver`s door does not latch securely closed |6.2.B.1a|1
Braking system leaking O/S FRONT TO REAR BRAKE PIPE |3.6.A.1|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded INNER SILL |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded INNER SILL |5.2.6|1
Braking system leaking O/S FRONT TO REAR BRAKE PIPE LEAKING |3.6.A.1|1
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))1
Front Headlamp light intensity severely reduced headlight covers frosted up both sides |4.1.4 |a||1
Offside Front Anti-roll bar ball joint likely to become detached droplink rod top ball joint |5.3.4 |a| |ii||1
Nearside Front Upper Anti-roll bar ball joint likely to become detached drop link rod top ball joint |5.3.4 |a| |ii||1
Centre Rear Brake pipe seriously damaged |found during steering lock to lock check| |2.2.D.2b|1
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt lower suspension arm ball joint cover excessively perished/split (5.3.4 (b) (ii))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear inner sills/sill ends corroded. (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/outrigger corroded (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by front upper wishbone inner mounts. (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under wheel arch (5.3.6 (a) (i))1
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill/floor (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar prescribed area has a chassis leg excessively corroded |2.4.A.3|1
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded Seat belt anchorage prescribed area is corroded excessively [5.2.6] offside rear inner |sill prescribed area| |5.2.6|1
Nearside Front Lower Suspension component missing split pin missing from castle nut (5.3.3 (a) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/chassis |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/chassis |5.3.6 |a| |i||1
Nearside Front Suspension component ball joint excessively worn (5.3.4 (a) (i))1
Nearside Front Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in front of uppr wishbone (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in front of upper wishbone (5.3.6 (a) (i))1
Seat belt anchorage prescribed area is excessively corroded Outer sill/ inner wheel arch |5.2.6|1
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii))1
Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering under wing (6.1.1 (c) (ii))1
Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering under wing (6.1.1 (c) (ii))1
Nearside Front Upper Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))1
Offside Front Upper Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i))1
Central Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii||1
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill holed & rusted |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded floor holed & rusted |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill, inner sill and ajoining floor panel (7.1.1 (a) (i))1
Offside Rear Anti-roll bar attachment bracket/mounting insecure loose (5.3.3 (a) (i))1
Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement both |2.4.G.2|1
Battery insecure and likely to fall from carrier *Battery tray corroded* (4.13 (a) (ii))1
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill (6.2.2 (d) (i))1
Front Inner Brake disc significantly and obviously worn |1.1.14 |a| |i||1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg. (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INNER SILL |5.3.6 |a| |i||1
Exhaust emissions likely to be affected by an exhaust leak leak from backbox to mid section flange (8.2.1.1 (b))1
Exhaust has a major leak of exhaust gases leak from backbox to mid section flange (6.1.2 (a))1
Nearside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting nearside rear outer sill 30cm from seat belt mounting and seat |6.2.2 |d| |i||1
Exhaust has a major leak of exhaust gases middle to rear joint (6.1.2 (a))1
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner end of sill (5.3.6 (a) (i))1
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner end of sill (5.3.6 (a) (i))1
Nearside Front Front suspension locking device ineffective nuts and circlips corroded away |2.5.A.4|1
Offside Front Front suspension retaining device ineffective nut and split pin corroded away |2.5.A.4|1
Offside Front Suspension spring mounting prescribed area is excessively corroded under wheel arch |2.4.A.3|1
Nearside Rear Outer Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i))1
Offside Rear Outer Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail (6.1.1 (c) (i))1
Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement both inner |2.4.G.2|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded cross member to floor marked in yellow chalk |2.4.A.3|1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner cill (6.2.2 (d) (i))1
Nearside Front Suspension component mounting prescribed area is excessively corroded Chassis |2.4.A.3|1
Drivers door cannot be opened from inside the vehicle (6.2.3 (a))1
Nearside Front Shock absorbers has an excessively worn bush lower bush (5.3.2 (c))1
Offside Front Shock absorbers has an excessively worn bush lower bush (5.3.2 (c))1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear mount point, chassis leg (5.3.6 (a) (i))1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear mount point, inner sill (5.3.6 (a) (i))1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))1
Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg near `D` bush mount |5.3.6 |a| |i||1
Power steering component leaking steering rack area |2.1.5 |a||1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor area |7.1.1 |a| |i||1
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded (6.1.1 (c) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by anti-roll bar mount(inner arch) (5.3.6 (a) (i))1
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i||1
Nearside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced chassis repairs (6.1.1 (d) (i))1
Offside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced chassis repairs (6.1.1 (d) (i))1
Nearside Integral body structure inadequately repaired such that structural rigidity is significantly reduced lower sill /floor rear wing (6.1.1 (d) (i))1
Offside Lower Integral body structure inadequately repaired such that structural rigidity is significantly reduced front wing sill / lower floor not repaired correctly (6.1.1 (d) (i))1
Offside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced lower wing insecure not welded (6.1.1 (d) (i))1
Nearside Steering locking device ineffective (2.1.3 (d))1
Offside Headlamp not working on dipped beam bad connection |1.7.5a|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sii |5.2.6|1
Central Outer Seat belt anchorage prescribed area strength or continuity significantly reduced n/s sill (7.1.1 (a) (i))1
Hydraulic brake cylinder operating mechanism has excessive travel (1.1.16 (e) (i))1
Offside Rear Parking brake inoperative on one side caliper inop (1.4.1 (a))1
Nearside Rear Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch marked |5.3.6 |a| |i||1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by chassis leg marked |5.3.6 |a| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch. (6.1.1 (c) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch. (6.1.1 (c) (i))1
Offside Rear Brake pipe at imminent risk of failure or fracture (1.1.11 (a))1
Nearside Rear Brake pipe at imminent risk of failure or fracture failed on brake test (1.1.11 (a))1
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded on sill |5.2.6|1
Front Suspension arm corroded and seriously weakened both front (5.3.3 (b) (i))1
Exhaust emissions - engine idle speed too high fluctuating (8.2.1.2 (e))1
Rear Rear fog lamp light intensity significantly reduced (4.5.4 (a))1
Offside Rear Rear fog lamp does not emit a steady red light |4.5.4 |a||1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced big hole around anti roll mounting |6.1.1 |c| |i||1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced big hole around anti roll mounting |6.1.1 |c| |i||1
Nearside Front Inner Vehicle structure is deformed and structural rigidity is significantly reduced sill holed |6.1.1 |a| |i||1
Offside Front Inner Vehicle structure is deformed and structural rigidity is significantly reduced sill holed |6.1.1 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner lower sill corroded and holed |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner lower sill corroded and holed |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill end cap corroded and holed |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded sill end cap corroded and holed |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill corroded and holed |5.2.6|1
Offside Rear Suspension component mounting prescribed area is excessively corroded floor pan corroded and holed by tie bar mount |2.4.A.3|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded and significantly weakened (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area is inadequately repaired outer sill weld has become detached and not complete (7.1.1 (a) (i))1
Brake performance not tested brake fluid low and leaking n/s/r |3.7.A.1|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced x2 (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to floor holed (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill holed (5.3.6 (a) (i))1
Exhaust emissions exceed manufacturer`s specified limit |8.2.2.2 |a||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at inner arch (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area is excessively corroded Wheel arch |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill as marked (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill as marked (5.3.6 (a) (i))1
Offside Seat belt anchorage loose |7.1.1 |b||1
Offside Anti-roll bar linkage missing |5.3.3 |a| |ii||1
Nearside Front Lower Steering linkage ball joint ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))1
Offside Front Lower Steering linkage ball joint ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))1
Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting chassis rail (6.2.2 (d) (i))1
Offside Seat belt anchorage likely to become detached in the event of a collision |7.1.1 |a| |ii||1
Offside Front Seat belt buckle not functioning as intended Won`t release under load |7.1.2 |d||1
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill, in front of rear wheel arch |6.1.B.2|1
Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Under anti-roll bar mounting |6.1.B.2|1
Offside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Under anti-roll bar mounting |6.1.B.2|1
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill holed (6.2.2 (d) (i))1
Exhaust has a major leak of exhaust gases Middle to rear |6.1.2 |a||1
Central Rear Suspension component pin or bush likely to become detached suspension component insecure/loose bolts (5.3.4 (a) (ii))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheelarch multiple holes (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch on chassis leg (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis anti roll bar mounting area |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis anti roll bar mounting area |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer seal (5.3.6 (a) (i))1
Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroding away (6.1.1 (c) (i))1
Offside Power steering component leaking Steering rack seal (2.1.5 (a))1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis behind wheel |2.4.A.3|1
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill corrodes causing previous repair to not be attached (7.1.1 (a) (i))1
Nearside Rear Brake lining|s| less than 1.5 mm thick |1.1.13 |a| |ii||1
Rear Exhaust system insecure both rearmost offside and nearside rubber support mountings broken (6.1.2 (a))1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill inner plus outer + chassis leg (6.1.1 (c) (i))1
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i))1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected behind nsf top wishbone inner chassis (5.3.6 (a) (ii))1
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded Body sill |5.2.6|1
Rear Exhaust has a major leak of exhaust gases silencer joint severely corroded (6.1.2 (a))1
Emissions not tested due to exhaust leak and high lambda reading (8.2.1.2 (d))1
Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill rear most section (6.1.1 (c) (i))1
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill rear most section (6.1.1 (c) (i))1
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded outer rear sill corroded |5.2.6|1
Emissions not tested lambda reading high 1.54 (8.2.1.2 (d))1
Central Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen |3.5 |a||1
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill to floor |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis visible under wheel arch |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch and inner sill |7.1.1 |a| |i||1
Exhaust has a major leak of exhaust gases rear box joint (6.1.2 (a))1
Offside Suspension component mounting prescribed area is inadequately repaired outer sill (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area is inadequately repaired inner sill/floor (7.1.1 (a) (i))1
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and Outer sill (6.1.1 (c) (i))1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and Outer sill (6.1.1 (c) (i))1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch (6.1.1 (c) (i))1
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Boot floor (6.1.1 (c) (i))1
Nearside Steering locking device insecure |2.2.C.1g|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner wing area (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear inner wing area. (7.1.1 (a) (i))1
Rear Exhaust has a major leak of exhaust gases pipe broken off (6.1.2 (a))1
Emissions not tested exhaust broken off (8.2.1.2 (d))1
Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired outriggers (6.2.2 (d) (ii))1
Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired ouitriggers and lower wing area (6.2.2 (d) (ii))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch marked yellow (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill end marked yellow (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan marked yellow (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan marked yellow (7.1.1 (a) (i))1
Brake performance unable to be tested Due to leaking brake pipe (1.2.1 (g))1
Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Both rear inner wheel arches (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by inner wheel arch (5.3.6 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill panel (7.1.1 (a) (i))1
Offside Front Anti-roll bar linkage ball joint likely to become detached Drop link lower ball joint detatched (5.3.4 (a) (ii))1
Offside Front Anti-roll bar attachment bracket/mounting fractured link (5.3.3 (b) (ii))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill lower section & inner forward wheel arch end section excessively corroded within 30cms of front passengers lower seat belt anchorage point. (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail forward section excessively corroded within 30cms of front suspension & anti-roll bar mountings. (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail forward section excessively corroded within 30cms of front suspension & anti-roll bar mountings. (5.3.6 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill x2 (7.1.1 (a) (i))1
Front Inner Bumper damaged and likely to cause injury when grazed or contacted plate surround (6.1.4 (a) (i))1
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill & arch (6.1.1 (c) (i))1
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to floor (6.1.1 (c) (i))1
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill inner (6.1.1 (c) (i))1
Offside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill outer (6.1.1 (c) (i))1
Seat belt anchorage prescribed area is excessively corroded both lower |5.2.6|1
Nearside Front Braking system leaking brake calliper |3.6.A.1|1
Nearside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch/ sill area (5.3.6 (a) (ii))1
Offside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch / outer sill area (5.3.6 (a) (ii))1
Rear fog lamp has less than 50% of the light sources illuminating |1.3.2b|1
Emissions not tested c.o and lambda way over the limit |7.3.A.1|1
Brake performance not tested Due to fluid leaking (1.2.1 (g))1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Chassis leg (5.3.6 (a) (ii))1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Chassis leg (5.3.6 (a) (ii))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill x2 (7.1.1 (a) (i))1
Headlamp light source and lamp not compatible Both headlights (4.1.4 (c))1
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing/chassis leg holed (6.1.1 (c) (i))1
Nearside Rear Subframe mounting prescribed area is excessively corroded OUTTER SILL |2.4.A.3|1
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill with in 30cm |5.2.6|1
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill with in 30cm |5.2.6|1
Rear fog lamp not working fog light not working |1.3.2b|1
Exhaust has a major leak of exhaust gases where back box bolts to mid section |7.1.2|1
Offside Front Direction indicator not working in bumper |4.4.1 |a| |ii||1
Vehicle structure has a fracture which is likely to adversely affect braking or steering ALL FRONT CHASSIS ARMS |6.1.1 |a| |ii||1
Seat belt anchorage prescribed area strength or continuity significantly reduced O/S AND N/S FLOOR TO SILLS |7.1.1 |a| |i||1
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected SILL CLOSING PANEL |5.3.6 |a| |ii||1
Emissions not tested major exhaust leaks |8.2.2.2 |e||1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner side sill |5.2.6|1
Exhaust has a major leak of exhaust gases centre box |7.1.2|1
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear of inner sill (6.1.1 (c) (i))1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear of inner sill (6.1.1 (c) (i))1
Offside Front front parking |secondary| brake grabbing severely |3.7.B.6b|1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced 1/4 sill (7.1.1 (a) (i))1
Offside Rear Body has a projection caused by corrosion inner sill |6.1.C.1|1
Offside Front Valve stem seriously misaligned (5.2.3 (j))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill / floor corroded within 30cm of seat belt anchorage (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill / floor corroded within 30cm of seat belt anchorage (7.1.1 (a) (i))1
Nearside Front Subframe mounting prescribed area is excessively corroded around anti roll bar mounting |2.4.A.3|1
Offside Front Subframe mounting prescribed area is excessively corroded around anti roll bar mounting |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner and outer sill end |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner and outer sill end |5.2.6|1
Nearside Seat belt anchorage prescribed area is excessively corroded Outer body sill |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded inner and outer body sills |5.2.6|1
Central Front Floor excessively deteriorated n/s (6.2.4 (a) (i))1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Offside outer sill corroded (6.2.2 (d) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced body sill (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced body sill (7.1.1 (a) (i))1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing / wheel arch (5.3.6 (a) (i))1
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3|1
Front Bumper insecure Front Bumper Insecure............ (6.1.4 (a) (i))1
Front Headlamp insecure Nearside Front Headlamp Insecure........... (4.1.1 (c))1
Electrical wiring insecure and connectors likely to become disconnected earth wire by rear diff (4.11 (a) (ii))1
Front Position lamp not working x2 (4.2.1 (a) (ii))1
Nearside Rear Rear position lamp|s| incorrect colour showing white light |1.1.A.3e|1
Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill ,end of sill and under sill (7.1.1 (a) (i))1
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))1
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner chassis (6.1.1 (c) (i))1
Offside Outer Seat belt anchorage prescribed area is excessively corroded lower |5.2.6|1
Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Offside Brake pipe at imminent risk of failure or fracture front to rear (1.1.11 (a))1
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sile (6.1.1 (c) (i))1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sile (6.1.1 (c) (i))1
Exhaust Lambda reading after 2nd fast idle outside specified limits 2 high (8.2.1.2 (c))1
Rear Seat belt anchorage prescribed area strength or continuity significantly reduced o/s & n/s inner sills & sills (7.1.1 (a) (i))1
Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s & n/s inner wheel arches (6.1.1 (c) (i))1
Offside Rear fog lamp does not emit a steady red light Showing white light (4.5.4 (a))1
Offside Rear Lower Suspension arm corroded and seriously weakened Marked with yellow chalk (5.3.3 (b) (i))1
Offside Rear Lower Suspension arm pin or bush excessively worn Front bush (5.3.4 (a) (i))1
Nearside Rear Lower Suspension arm pin or bush excessively worn Front bush (5.3.4 (a) (i))1
Nearside Rear Upper Suspension arm pin or bush excessively worn Outer bush in hub (5.3.4 (a) (i))1
Offside Rear Lower Suspension arm pin or bush excessively worn Back bush (5.3.4 (a) (i))1
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to floor area (6.1.1 (c) (i))1
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch area (6.1.1 (c) (i))1
Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area (5.3.6 (a) (i))1
Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength wing area (5.3.6 (a) (i))1
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing to floor area (6.1.1 (c) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing area under bonnet (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor and chassis area (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor and chassis area (5.3.6 (a) (i))1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor area x 2 places (7.1.1 (a) (i))1
Offside Rear Brake valve leaking calliper area (1.1.7 (d) (i))1
Offside Front Outer Anti-roll bar linkage pin or bush likely to become detached drop link detatched (5.3.4 (a) (ii))1
Rear Exhaust has a major leak of exhaust gases at join. (6.1.2 (a))1
Nearside Rear Inner Seat belt anchorage prescribed area is inadequately repaired sill. (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch at arm mount. (5.3.6 (a) (i))1
Nearside Side repeater not working intermittently partially working (4.4.1 (a) (ii))1
Nearside Inner Seat belt anchorage prescribed area is excessively corroded inner sill area |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded lnner & outer sill area. |5.2.6|1
Front Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))1
Front Headlamp has a product on the light source which changes emitted colour to other than white or yellow x2 (4.1.4 (b))1
Offside Front Anti-roll bar attachment bracket/mounting fractured (5.3.3 (b) (ii))1
Road wheel more than one fixing missing nuts missing on all 4 wheels (5.2.1 (a) (ii))1
Offside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting o/s floor corroded within 30cm of a mountain (6.2.2 (d) (i))1
Seat belt anchorage prescribed area strength or continuity significantly reduced rust N/S outer sill |7.1.1 |a| |i||1
Nearside Front Anti-roll bar linkage inappropriately repaired |2.4.A.2|1
Nearside Front Seat belt anchorage prescribed area is excessively corroded chassis |5.2.6|1
Offside Front Seat belt anchorage prescribed area is excessively corroded chassis |5.2.6|1
Nearside Subframe mounting prescribed area is excessively corroded front chassis leg |2.4.A.3|1
Offside Subframe mounting prescribed area is excessively corroded front chassis leg |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi leg (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back panel behind rear wheel (5.3.6 (a) (i))1
Rear Suspension arm damaged and seriously weakened both rear lower arms (5.3.3 (b) (i))1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill [filler] |7.1.1 |a| |i||1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch/sill |7.1.1 |a| |i||1
Offside Front Upper Anti-roll bar linkage missing not connected at top |5.3.3 |a| |ii||1
Offside Rear Battery insecure and likely to fall from carrier in boot floor corroded (4.13 (a) (ii))1
Offside Front Seat belt anchorage likely to become detached in the event of a collision Side sill corroded excessively (7.1.1 (a) (ii))1
Exhaust fumes causing a danger to health of persons on board (6.1.2 (b) (ii))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear inner flitches in several places (5.3.6 (a) (i))1
Nearside Front Shock absorbers likely to become detached |5.3.2 |a| |ii||1
Offside Front Shock absorbers likely to become detached |5.3.2 |a| |ii||1
Nearside Front Sub-frame attachment bracket/mounting bolt missing |2.4.G.1|1
Offside Front Sub-frame attachment bracket/mounting bolt missing |2.4.G.1|1
Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut mounting area (5.3.6 (a) (i))1
Body has an unsafe modification is likely to cause injury, such as modification to the body rear wing on boot (6.2.1 (d) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside front wheel arch |5.3.6 |a| |i||1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside and nearside rear inner wheel arch |5.3.6 |a| |i||1
Side repeater missing offside and nearside front |4.4.1 |a| |ii||1
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sills |5.2.6|1
Seat belt anchorage prescribed area is excessively corroded both rear |5.2.6|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill holed by corrosion with in 30 cm of seat belt mounting point (7.1.1 (a) (i))1
Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sil holed (7.1.1 (a) (i))1
Front Headlamp has a product on the lens so that the light output is severely reduced both fronts no pattern (4.1.4 (b))1
Seat belt anchorage prescribed area strength or continuity significantly reduced both side sills (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount (5.3.6 (a) (i))1
Nearside Front Electrical wiring damaged and bare wires exposed |1.9.2c|1
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill front to rear (7.1.1 (a) (i))1
Nearside Rear Lower Suspension arm pin or bush likely to become detached outer bush (5.3.4 (a) (ii))1
Offside Rear Lower Suspension arm pin or bush likely to become detached outer bush (5.3.4 (a) (ii))1
Offside Stop lamp insecure |1.2.1a|1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer & inner sill (6.1.1 (c) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill by wheel arch (7.1.1 (a) (i))1
Nearside Front Lower Suspension arm locating pin locking device missing |2.4.G.3b|1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Rear frame mounting area (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sills |5.3.6 |a| |i||1
Emission control equipment obviously defective (8.2.1.1 (a))1
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting jacking point (6.2.2 (d) (i))1
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting jacking point (6.2.2 (d) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Floor to inner sill (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner arch (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner arch (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area is excessively corroded by antiroll bar |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wing/chassis |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded Inner wing/chassis |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is inadequately repaired Sill area |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area is inadequately repaired Sill area |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area is inadequately repaired Chassis |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area is inadequately repaired Chassis |5.3.6 |a| |i||1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s/r and o/s/r upper inner arch |5.3.6 |a| |i||1
Seat belt anchorage prescribed area strength or continuity significantly reduced n/s/r and o/s/r inner sill |7.1.1 |a| |i||1
Offside Rear Suspension component mounting prescribed area is inadequately repaired |5.3.6 |a| |i||1
Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))1
Exhaust emissions likely to be affected by an exhaust leak rear box to centre (8.2.2.1 (b))1
Offside Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength outer sill to floor pan |5.2.6|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor |7.1.1 |a| |i||1
Nearside Front Subframe mounting prescribed area is excessively corroded chasis |2.4.A.3|1
Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2|1
Battery insecure and likely to fall from carrier corroded and holed (4.13 (a) (ii))1
Offside Inner Seat belt anchorage prescribed area is excessively corroded floor to sill |5.2.6|1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill to chassis (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (ANTIROLL BAR MOUNT) (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (ANTIROLL BAR MOUNT) (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area is excessively corroded outter sill |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded outter sill |2.4.A.3|1
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s and n/s rear inner sills (6.1.1 (c) (i))1
Offside Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c|1
Seat belt anchorage prescribed area strength or continuity significantly reduced n/s centre floor (7.1.1 (a) (i))1
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both inner arch bottoms (5.3.6 (a) (i))1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings anti roll bar mounting |6.1.B.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inside engine bay |6.1.B.2|1
Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Rear Road wheel fixing missing wheel nut missing |5.2.1 |a| |i||1
Offside Front Anti-roll bar linkage has excessive play in a ball joint seperated |2.4.G.2|1
Offside Rear Suspension component mounting prescribed area is excessively corroded closing panel |2.4.A.3|1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor |5.3.6 |a| |i||1
Nearside Rear Torque/reaction arm attachment bracket/mounting fractured |2.4.G.1|1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre floor |6.1.B.2|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill/floor |6.1.B.2|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner boot |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner boot battery compartment |6.1.B.2|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2|1
Emissions not tested due to exhaust blowing |8.2.1.2 |d||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill in two places. (5.3.6 (a) (i))1
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and body (5.3.6 (a) (i))1
Nearside Rear Anti-roll bar linkage ball joint likely to become detached linkage detached |5.3.4 |a| |ii||1
Nearside Front Anti-roll bar linkage ball joint likely to become detached linkage detached |5.3.4 |a| |ii||1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill (7.1.1 (a) (i))1
Offside Rear Suspension component mounting prescribed area is inadequately repaired under sill (5.3.6 (a) (i))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area is excessively corroded sill area |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced end of sill (7.1.1 (a) (i))1
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))1
Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength strut top mount (5.3.6 (a) (i))1
Offside Front Inner Subframe mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))1
Offside Rear Inner Subframe mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))1
Nearside Rear Subframe mounting prescribed area excessively damaged significantly reducing structural strength boot chassis (5.3.6 (a) (i))1
Nearside Front Steering system has excessive free play detected at the steering wheel |steering rack fitted| rod end |2.2.A.1b|1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill has hole (6.1.1 (c) (i))1
Fuel cap/sealing device ineffective fuel flap not locking |6.1.3 |b| |i||1
Offside Front front brake binding caliper |3.7.B.1|1
Offside Front Anti-roll bar linkage insecure and impairing directional stability link bar broken |5.3.3 |a| |ii||1
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill front and rear |6.1.B.2|1
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill front and rear |6.1.B.2|1
Offside Rear Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt drop/link/post |2.4.G.2|1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under battery (6.1.1 (c) (i))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch to inner and outer sill (6.1.1 (c) (i))1
Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings both side |6.1.B.2|1
Suspension component mounting prescribed area is inadequately repaired |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area is inadequately repaired floor |5.2.6|1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner & outer sills from front to rear |6.1.1 |c| |i||1
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner & outer sills from front to rear |6.1.1 |c| |i||1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to sill |6.1.1 |c| |i||1
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to sill |6.1.1 |c| |i||1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded end of outer sill |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded end of outer sill |5.2.6|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis around anti roll bar mounting |5.3.6 |a| |i||1
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill under car on |5.2.6|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill second patch (5.3.6 (a) (ii))1
Centre Braking system leaking front to rear pipe |3.6.A.1|1
Nearside Outer Seat belt anchorage prescribed area is excessively corroded |floor| |5.2.6|1
Nearside Front Suspension component mounting prescribed area is excessively corroded |chassis | |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded | chassis| |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis near spring mounting and upper suspension arm |2.4.A.3|1
Nearside Front Body has a sharp edge caused by corrosion outer sill |6.1.C.1|1
Shock absorbers insecurely attached lower bolt loose (5.3.2 (a) (i))1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg/next to upper suspension arm mounting point |2.4.A.3|1
Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings chassie leg inner |6.1.B.2|1
Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2|1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner arch |6.1.1 |c| |ii||1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner arch |6.1.1 |c| |ii||1
Offside Rear Body has a sharp edge caused by corrosion sill |6.1.C.1|1
Nearside Rear Direction indicators have less than 50% of the light sources illuminating |1.4.A.2c|1
Rear Direction indicators have less than 50% of the light sources illuminating |1.4.A.2c|1
Nearside Front Anti-roll bar linkage attachment bracket/mounting fractured drop link (5.3.3 (b) (ii))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corroded / previously body filled (6.2.2 (d) (i))1
Offside Front Body panel insecure wing. (6.2.1 (a) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor. (6.1.1 (c) (i))1
Central Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor. (6.1.1 (c) (i))1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill end. (6.1.1 (c) (i))1
Central Front Service brake excessively binding (1.2.1 (f))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced lower sill (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced lower sill (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength roll bar mounting (5.3.6 (a) (i))1
Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))1
Nearside Rear Wheel bolt|s| loose |4.2.A.1e|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced within 30cm of lower seat belt mounting point |7.1.1 |a| |i||1
Nearside Front Inner Body panel corroded and likely to cause injury sill (6.2.1 (a) (i))1
Offside Rear Inner Body panel corroded and likely to cause injury sill (6.2.1 (a) (i))1
Offside Front Inner Body panel corroded and likely to cause injury sill (6.2.1 (a) (i))1
Offside Front Outer Body panel corroded and likely to cause injury sll (6.2.1 (a) (i))1
Offside rear parking |secondary| brake grabbing severely |3.7.B.6b|1
Offside Front Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|1
Rear Service brake effort inadequate at a wheel Both (1.2.1 (a) (i))1
Nearside Brake pipe leaking on a hydraulic braking system Front to rear (1.1.11 (b) (ii))1
Exhaust emissions likely to be affected by an exhaust leak Centre and rear flange (8.2.1.1 (b))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis,within 30cm of the Anti-roll bar mounting (5.3.6 (a) (i))1
Offside Rear Brake hose damaged and likely to fail |1.1.12 |a||1
Brake performance not tested due to flexy pipe o/s/rear |1.2.1 |g||1
Front coil spring broken offside and nearside |2.4.C.1a|1
Rear coil spring broken offside and nearside |2.4.C.1a|1
Nearside Rear Exhaust has a major leak of exhaust gases |6.1.2 |a||1
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i||1
Nearside Front Suspension component mounting prescribed area is excessively corroded Wheel arch |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded Drivers floor |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded Floor/Box section |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wheel arch Chassis leg |2.4.A.3|1
Power steering ram leaking |2.1.5 |a||1
Offside Rear Floor excessively deteriorated battery support |6.2.4 |a| |i||1
Emissions not tested due to major fluid leaks |8.2.1.2 |d||1
Nearside Front Front position lamp|s| obscured more than 50% |1.1.A.3c|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Arch |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Inner Arch |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Floor Near Subframe Mount |5.3.6 |a| |i||1
Offside Front Torsion bar insecure at an end fixing |2.4.E.2|1
Nearside Inner Vehicle structure is deformed and structural rigidity is significantly reduced sill excessively corroded |6.1.1 |a| |i||1
Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill excessively corroded |6.1.1 |c| |i||1
Battery insecure and likely to fall from carrier corroded underneath battery |4.13 |a| |ii||1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced and boot floor |6.1.1 |c| |i||1
Steering wheel retaining device insecure |2.1.6|1
Nearside Seat belt anchorage prescribed area is excessively corroded inner sill below drain hose |5.2.6|1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill, inner and outer and wheel arch (5.3.6 (a) (i))1
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))1
Nearside Outer Integral body structure inadequately repaired such that structural rigidity is significantly reduced sill rear (6.1.1 (d) (i))1
Offside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced rear sill (6.1.1 (d) (i))1
Emissions not tested engine running rough and smoking also cat glowing cherry red risk of fire (8.2.1.2 (d))1
Supplementary restraint system warning lamp indicates a fault air bag (7.1.6 (a))1
Front Drivers airbag missing (7.1.5 (a))1
Emissions unable to be completed co fail to high (8.2.1.2 (d))1
Nearside Front Body panel insecure wing bottom (6.2.1 (a) (i))1
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/floor |6.1.1 |c| |i||1
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/floor |6.1.1 |c| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill within 30cm of anchorage point (7.1.1 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch 30 cm of shocker mounting point (5.3.6 (a) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded and outer sill holed |5.2.6|1
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded and outer sill holed |5.2.6|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing/chass |6.1.B.2|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing/chass |6.1.B.2|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing rear of spring mount |6.1.B.2|1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chass |6.1.B.2|1
Nearside Front Body insecure WING (6.2.2 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floorpan |5.3.6 |a| |i||1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings anti roll bar mounting |6.1.B.2|1
Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced chassis (6.1.1 (a) (i))1
Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced chassis (6.1.1 (a) (i))1
Offside Suspension component mounting prescribed area is excessively corroded under sill |2.4.A.3|1
Offside Front Seat belt webbing significantly weakened cut (7.1.2 (b) (ii))1
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill and inner sill (6.1.1 (c) (i))1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill and inner sill (6.1.1 (c) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced seal (7.1.1 (a) (i))1
Offside Front Steering arm modification unsafe OSF Track rod snapped and inadequately repaired (2.1.3 (f) (i))1
Exhaust has a major leak of exhaust gases tightened middle to rear flange (6.1.2 (a))1
Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area both sides |6.1.1 |c| |i||1
Offside Rear Anti-roll bar has excessive play in a ball joint broken off |2.4.G.2|1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg above undertray at anti roll bar mounting point (5.3.6 (a) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg above undertray next to anti roil bar mounting point (5.3.6 (a) (i))1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))1
Nearside Direction indicator flashing more than 120 times a minute n/s/f not working and effecting position lamp |1.4.A.2g|1
Central Upper Stop lamp(s) not working High level (4.3.1 (a) (ii))1
Front front brakes release unevenly |3.7.B.4|1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor/jacking point (6.1.1 (c) (i))1
Offside Rear Upper Body has a projection caused by corrosion wheel arch has a hole |6.1.C.1|1
Nearside Front Upper Body has a projection caused by corrosion wheel arch has a hole |6.1.C.1|1
Front Inner Brake disc significantly and obviously worn both sides (1.1.14 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i||1
Offside Front Seat belt installation anchorage insecure (10.1 (d))1
Front Position lamp not working both side lights |4.2.1 |a| |ii||1
Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt link bar (5.3.4 (b) (ii))1
Offside Rear Anti-roll bar linkage ball joint excessively worn link bar (5.3.4 (a) (i))1
Parking brake lever ratchet not holding correctly |1.1.6 |a||1
Hazard warning switch inoperative missing (4.4.2 (a) (ii))1
Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen missing (3.5 (a))1
Nearside Front Direction indicator not working wing (4.4.1 (a) (ii))1
Nearside Front Anti-roll bar linkage missing Droplink (5.3.3 (a) (ii))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill section |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded sill section |5.2.6|1
Offside Front Lower Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3|1
Parking brake lever has excessive movement indicating incorrect adjustment Travel (1.1.6 (c))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill/floor (5.3.6 (a) (i))1
Nearside Front Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Chassie (5.3.6 (a) (i))1
Offside Front Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Chassie (5.3.6 (a) (i))1
Lower Power steering pipe/hose excessively corroded (2.1.5 (g) (i))1
Nearside Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength improper repair |5.2.6|1
Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner sill (6.2.2 (d) (ii))1
Nearside Headlamp insecure mount broken |1.7.3|1
Rear Electrical wiring deteriorated and bare connector exposed spade broken |1.9.2c|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i||1
Offside Outer Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner chassis |6.1.1 |c| |i||1
Nearside Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii||1
Headlamp aim so that beam "kick up" is not visible on the screen Both Sides |4.1.2 |a||1
Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Engine Bay Arch Area |Just Under Air Intake Pipe| |5.3.6 |a| |i||1
Front Headlamp has a product on the lens so that the light output is severely reduced BOTH (4.1.4 (b))1
Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i))1
Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i))1
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i))1
Offside Rear Suspension component mounting prescribed area is excessively corroded sill section |2.4.A.3|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced rear inner aech area |7.1.1 |a| |i||1
Offside Rear Battery insecure Boot floor corroded |1.9.1|1
Power steering pipe|s| or hose|s| excessively corroded all to steering rack |2.3.2|1
Offside Suspension component mounting prescribed area is excessively corroded front chassis |2.4.A.3|1
Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis (6.1.1 (c) (i))1
Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis X3 (6.1.1 (c) (i))1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering anti rollbar |6.1.A.1|1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering anti rollbar |6.1.A.1|1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings full sill |6.1.B.2|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front end of main chassis beam (chalked) (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by andti roll bar mount (5.3.6 (a) (i))1
Offside Front Anti-roll bar insecurely attached D bush bolt missing (5.3.3 (a) (i))1
Offside Rear Shock absorbers insecurely attached Bolt lose (5.3.2 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer Sill (7.1.1 (a) (i))1
Offside Front Road wheel fractured (5.2.2 (a))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top mounting area x2 (5.3.6 (a) (i))1
Central Exhaust has a major leak of exhaust gases rear of cat. union flange corroded (6.1.2 (a))1
Offside Rear Road wheel fixings not compatible (5.2.2 (d))1
Offside Front Brake pipe likely to become detached or damaged (1.1.11 (d) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail in three positions (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength various under body areas starting to corrode (5.3.6 (a) (i))1
Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both rears |2.4.G.2|1
Exhaust has a major leak of exhaust gases middle and rear |6.1.2 |a||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill hole an corroded (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill holed an corroded (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear outer sill (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength an rear outer sill (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg inner wheel arch also anti roll bar insecure (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis leg inner wheel arch (5.3.6 (a) (i))1
Brake performance not tested car is dangerous shouldnt be driving way from test station (1.2.1 (g))1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis section excessive corrosion |2.4.A.3|1
Nearside Front Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis jacking point |2.4.A.3|1
Nearside Front Obligatory mirror insecure |8.1.1|1
Nearside Front Suspension component mounting prescribed area is excessively corroded Upper arm |2.4.A.3|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Under head light |6.1.B.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing corroded |6.1.B.2|1
Offside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings rear inner and outer sill |6.1.B.2|1
Front Brake pedal anti-slip provision missing (1.1.2 (c))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill bottom of front wing (6.1.1 (c) (i))1
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced towing eye end of chassis rail (6.1.1 (c) (i))1
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner arch (5.3.6 (a) (ii))1
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner arch (5.3.6 (a) (ii))1
Offside Front Floor excessively deteriorated floor |6.2.4 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced corner and floor/sill edge |7.1.1 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing under bonnet |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing under bonnet |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/sill (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/sill (5.3.6 (a) (i))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill |7.1.1 |a| |i||1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre floor to sill |7.1.1 |a| |i||1
Nearside Rear Suspension arm attachment bracket/mounting insecure |2.4.G.1|1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill section |5.3.6 |a| |i||1
Parking brake lever has excessive movement indicating incorrect adjustment handbrake too much travell |1.1.6 |c||1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner cill section |5.3.6 |a| |ii||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill section |5.3.6 |a| |i||1
Suspension component mounting prescribed area is excessively corroded Offside front outer sill |2.4.A.3|1
Suspension component mounting prescribed area is excessively corroded Nearside front outer AND inner sill |2.4.A.3|1
Suspension component mounting prescribed area is excessively corroded Offside inner wheel chassis |2.4.A.3|1
Suspension component mounting prescribed area is excessively corroded Nearside front inner wheel chassis above suspension arm mounting |2.4.A.3|1
Seat belt anchorage prescribed area is excessively corroded Nearside inner sill - center and rear |5.2.6|1
Seat belt anchorage prescribed area is excessively corroded Offside inner sill - center and rear |5.2.6|1
Seat belt anchorage prescribed area is excessively corroded Offside front under floor |5.2.6|1
Seat belt anchorage prescribed area is excessively corroded Offside rear outer sill/arch |5.2.6|1
rear brake recording little or no effort both rears |3.7.B.5a|1
Rear Exhaust has a major leak of exhaust gases join |7.1.2|1
Front Service brake excessively binding Both nearside & offside (1.2.1 (f))1
Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area at rear |6.1.B.2|1
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear quater inner |6.1.B.2|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Floor area |5.2.6|1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced door sill |7.1.1 |a| |i||1
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced door sill |7.1.1 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under sill / floor pan |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under sill / floor pan |7.1.1 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at antiroll bar mount point |5.3.6 |a| |i||1
Offside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt upper and lower |2.4.G.2|1
Offside Subframe mounting prescribed area is excessively corroded complete inner sill |2.4.A.3|1
Offside Rear Inner Subframe mounting prescribed area is excessively corroded Sill |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced AT SILL |7.1.1 |a| |i||1
coil spring broken Both front |2.4.C.1a|1
Suspension component mounting prescribed area is excessively corroded o/s inner and outer sills |2.4.A.3|1
Suspension component mounting prescribed area is excessively corroded n/s outer sill |2.4.A.3|1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front chassis |5.3.6 |a| |i||1
Seat belt anchorage prescribed area strength or continuity significantly reduced both inner and outer sills and floor pans |7.1.1 |a| |i||1
Seat belt anchorage prescribed area strength or continuity significantly reduced n/s outer edge floor pan and outer sill |7.1.1 |a| |i||1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner/outer sill |6.1.1 |c| |i||1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill |6.1.B.2|1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner Arch |6.1.B.2|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner Arch |6.1.B.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis/ suspension area |6.1.B.2|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor to sill |6.1.B.2|1
Nearside Rear Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i||1
Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired around box sections (6.2.2 (d) (ii))1
Nearside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill to floor (6.2.2 (d) (i))1
Offside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill to floor (6.2.2 (d) (i))1
Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill behind wing both sides (6.2.2 (d) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail (6.1.1 (c) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i||1
Offside Front Suspension component attachment bracket/mounting corroded and seriously weakened chassis by anti roll bar fixing (5.3.3 (b) (i))1
Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail, near subframe mount |5.3.6 |a| |i||1
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail, near subframe mount |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area is excessively corroded shock absorber |2.4.A.3|1
Nearside Front Inner Suspension component mounting prescribed area fractured significantly reducing structural strength wing |5.3.6 |a| |i||1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor pan area |7.1.1 |a| |i||1
Exhaust emissions likely to be affected by an exhaust leak back box to middle pipe |8.2.1.1 |b||1
Nearside Front Suspension component mounting prescribed area is inadequately repaired Welded plate by roll bar mounting has corroded off inner wing and top edge is not attached . (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area is inadequately repaired Welded plate by roll bar mounting has corroded off inner wing and top edge is not attached . (5.3.6 (a) (i))1
Emissions not tested due to miss fire (8.2.1.2 (d))1
Offside Front Subframe mounting prescribed area is excessively corroded chassis above undertray |2.4.A.3|1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i||1
Offside Front Brake pipe inadequately supported |3.6.B.1|1
Rear Exhaust has a major leak of exhaust gases x2 (6.1.2 (a))1
Nearside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under lower sill |7.1.1 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wing |7.1.1 |a| |i||1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill back (6.1.1 (c) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floors to sills (6.2.2 (d) (i))1
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sills (6.2.2 (d) (i))1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floors to sills (6.2.2 (d) (i))1
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sills (6.2.2 (d) (i))1
Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |6.1.1 |c| |i||1
Sub-frame attachment bracket/mounting insecure |2.4.G.1|1
Rear Rear fog lamp insecure |1.3.2a|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded in the wheel arch |5.2.6|1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2|1
Front Front position lamp|s| not working mearside & offside |1.1.A.3b|1
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing holed several places |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded inner wing holed |2.4.A.3|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor holed |5.2.6|1
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded sill to floor holed |5.2.6|1
Rear coil spring broken offside & nearside |2.4.C.1a|1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill and wheel arch |7.1.1 |a| |i||1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill and wheel arch |7.1.1 |a| |i||1
Rear Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1|1
Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.A.1|1
Offside Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill |6.1.A.1|1
Nearside Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6|1
Engine MIL inoperative or indicates a malfunction inoperative (8.2.1.2 (h))1
Nearside Rear Road wheel fixing missing wheel nut (5.2.1 (a) (i))1
Nearside Front Vehicle structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i))1
Offside Front Vehicle structure inadequately repaired such that structural rigidity is significantly reduced MULTI PLACES DOWN RAIL (6.1.1 (d) (i))1
Nearside Rear Brake pipe connection leaking on a hydraulic braking system |1.1.11 |b| |ii||1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced battery tray (6.1.1 (c) (i))1
Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing|Chassis| |2.4.A.3|1
Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing|Chassis| |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner lower arch (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner lower arch (5.3.6 (a) (i))1
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))1
Emissions unable to be completed temp gauge shows high (water & oil levels checked prior to test) (8.2.1.2 (d))1
Offside Front Front position lamp|s| not in good working order |function impaired| |1.1.4a|1
Offside Front Anti-roll bar linkage has excessive play in a ball joint Broken |2.4.G.2|1
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s and o/s |6.1.1 |c| |i||1
Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength Inner sill (5.3.6 (a) (i))1
Front Power steering pipe/hose excessively corroded |2.1.5 |g| |i||1
Exhaust has a major leak of exhaust gases silencer towards rear. |6.1.2 |a||1
Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to sill, |6.1.B.2|1
Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x two places, |6.1.B.2|1
Exhaust has a major leak of exhaust gases towards rear, |7.1.2|1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg, within 30 cm of sub frame mounting. within 30 cm of front anti roll bar mounting. (6.1.1 (c) (ii))1
Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced Chassis leg (6.1.1 (a) (i))1
Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced Next to spring mount (6.1.1 (a) (i))1
Offside Lower Vehicle structure is fractured and structural rigidity is significantly reduced Chassis rail holed (6.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i||1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wing |5.3.6 |a| |i||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail on next to subframe mounting and anti roll bar attachment. (5.3.6 (a) (i))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear part of outer sill (7.1.1 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear part of outer sill (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor panel |5.2.6|1
Offside Braking system leaking front to rear brake pipe |3.6.A.1|1
Inner Headlamp not working on dipped beam |1.7.5a|1
Nearside Rear Torque/reaction arm has excessive play in a pin/bush |2.4.G.2|1
Offside Rear Torque/reaction arm has excessive play in a pin/bush |2.4.G.2|1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body |5.3.6 |a| |i||1
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed |7.1.1 |a| |i||1
Central Front front brake recording little or no effort |3.7.B.5a|1
Central Rear Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3|1
Offside Front Direction indicator not working Wing |4.4.1 |a| |ii||1
Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill on jacking point |6.1.1 |c| |i||1
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Both sides close to towing eyes (6.1.1 (c) (i))1
Rear Electrical wiring heavily deteriorated Earth strap to diff (4.11 (b) (ii))1
Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sill marked yellow |6.1.B.2|1
Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings outter sill marked yellow |6.1.B.2|1
Offside Front Suspension component mounting prescribed area is excessively corroded roll bar mounting |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded roll bar mounting |2.4.A.3|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail by anti roll bar link (5.3.6 (a) (i))1
Spare wheel insecure |6.4.2|1
Offside Front Inner Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg around subframe mounting point (5.3.6 (a) (ii))1
Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg corroded around subframe mount next to top arm mount (5.3.6 (a) (ii))1
Exhaust Lambda reading after 2nd fast idle outside specified limits to high (8.2.1.2 (c))1
Central Rear Exhaust has a major leak of exhaust gases exhaust joint blowing excessively (6.1.2 (a))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill excessive corrosion (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill excessive corrosion (7.1.1 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill excessive corrosion (7.1.1 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill excessive corrosion (7.1.1 (a) (i))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill excessive corrosion (6.1.1 (c) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill excessively corroded (6.1.1 (c) (i))1
Front Position lamp not working both nearside and offside (4.2.1 (a) (ii))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point, inner/outer sill |6.1.1 |c| |i||1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch |6.1.1 |c| |i||1
Subframe mounting prescribed area is excessively corroded n/s/f chassis to subframe mount |2.4.A.3|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded Inner Sill |5.2.6|1
Nearside Front Lower Passenger`s seat insecure floor corroded 30cm belt mount |6.2.A.1|1
Offside Rear brake caliper modified and seriously weakened leaking |3.5.1n|1
Main beam tell-tale not working comes on with dip (4.9.1 (a) (ii))1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing 5 places (5.3.6 (a) (i))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing 2 places (5.3.6 (a) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wing (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wing (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area is fractured |5.2.6|1
Nearside Rear Fluid suspension unit leaking |2.4.D.2|1
Front Direction indicators not working |1.4.A.2c|1
Rear Direction indicators not working |1.4.A.2c|1
Front Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f|1
Rear Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f|1
Front Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f|1
Rear Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Outer Sill-Door Shut |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Inner Sill X3 |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded Inner Sill |5.2.6|1
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded Outer |5.2.6|1
Nearside Front Subframe mounting prescribed area is excessively corroded Chassis |2.4.A.3|1
Offside Front Subframe mounting prescribed area is excessively corroded Chassis |2.4.A.3|1
Front Service brake excessively fluctuating and slight imbalance (1.2.1 (e))1
Nearside Front Floor excessively deteriorated under a post |6.2.4 |a| |i||1
Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill behind the front wing (6.2.2 (d) (i))1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Cill |6.1.B.2|1
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Inner arch area corroded and holed (7.1.1 (a) (i))1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Inner arch corroded and holed (7.1.1 (a) (i))1
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))1
Rear Exhaust has a major leak of exhaust gases back box flange (6.1.2 (a))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer wing and sill |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer wing and sill |7.1.1 |a| |i||1
Nearside Rear Anti-roll bar linkage insecurely attached Broken Off (5.3.3 (a) (i))1
Offside Rear Anti-roll bar linkage insecurely attached Broken Off (5.3.3 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength boot floor, leading to inner rear wheel arch |5.3.6 |a| |i||1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill leading up to the inner wheel arch |7.1.1 |a| |i||1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill leading up to the inner wheel arch |7.1.1 |a| |i||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill leading up to the inner rear wheel arch |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill leading up to the inner rear wheel arch |7.1.1 |a| |i||1
Offside Front Suspension arm pin or bush excessively worn |5.3.4 |a| |i||1
Central Rear Braking system leaking pipe |3.6.A.1|1
Seat belt anchorage prescribed area is excessively corroded O/s/r outer and inner sill |5.2.6|1
Seat belt anchorage prescribed area is excessively corroded N/s/r outer sill |5.2.6|1
Offside Rear coil spring broken Road Spring Snapped |2.4.C.1a|1
Battery insecure and likely to fall from carrier tray corroded + half missing (4.13 (a) (ii))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer and under sills (5.3.6 (a) (i))1
Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wing (5.3.6 (a) (i))1
Offside Front Lower Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill hole (6.2.2 (d) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg hole (6.2.2 (d) (i))1
Nearside Seat belt damaged |7.1.2 |b| |i||1
Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt both nearside & offside |5.3.4 |b| |ii||1
Nearside Rear Macpherson strut has excessive movement at the upper attachment |2.5.A.1c|1
Centre Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Centre Seat belt anchorage prescribed area is fractured |5.2.6|1
Nearside Front Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||1
Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to floor |6.1.B.2|1
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s inner sill holed |6.1.B.2|1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/r inner wheel arch holed |6.1.B.2|1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/r inner wheel arch holed |6.1.B.2|1
Offside Rear Coil spring insecure (5.3.1 (a) (i))1
Front Bumper damaged and likely to cause injury when grazed or contacted reg mount (6.1.4 (a) (i))1
Exhaust Lambda reading after 2nd fast idle outside specified limits 1.73 |8.2.1.2 |c||1
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer`s specified limits 0.42 |8.2.1.2 |a||1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced PANLE TO SILL |6.1.1 |c| |i||1
Offside Direction indicators not working |1.4.A.2c|1
Offside Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f|1
Nearside Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c|1
Offside Rear brake disc contaminated by brake fluid plus pads |3.5.1h|1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor holed (6.2.2 (d) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor holed (6.2.2 (d) (i))1
brake disc in such a condition that it is seriously weakened Both rear |3.5.1i|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wing |5.3.6 |a| |i||1
Nearside Front Upper Coil spring fractured or broken snaped. (5.3.1 (b) (i))1
Nearside Rear Anti-roll bar linkage ball joint dust cover missing |2.4.G.2|1
Subframe mounting prescribed area is excessively corroded offside front chassis |2.4.A.3|1
Seat belt anchorage prescribed area is excessively corroded nearside rear sill |5.2.6|1
Offside Rear Body has a projection caused by corrosion outer sill/quarter panel |6.1.C.1|1
Nearside Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a|1
Offside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Front Anti-roll bar linkage insecure detached |2.4.G.1|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill and floor |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill and floor |7.1.1 |a| |i||1
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg above anti roll bar mounting (5.3.6 (a) (ii))1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg above anti roll bar mounting (5.3.6 (a) (ii))1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor front toback (6.1.1 (c) (i))1
Offside Front Inner Seat belt anchorage likely to become detached in the event of a collision inner sill rust hole (7.1.1 (a) (ii))1
Offside Front Anti-roll bar insecurely attached drop link missing (5.3.3 (a) (i))1
Offside Rear Anti-roll bar insecurely attached drop link broke (5.3.3 (a) (i))1
Nearside Rear Anti-roll bar corroded and seriously weakened (5.3.3 (b) (i))1
Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill to floor rusted along the sills length (6.2.2 (d) (i))1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting nearside chassis rusted and holed between cross member and roll bar (6.2.2 (d) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg corroded and holed between cross member and roll bar (6.2.2 (d) (i))1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting upper chasis rotted at front under bonnet (6.2.2 (d) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rotted under bonnet at front (6.2.2 (d) (i))1
Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill panel (6.2.2 (d) (i))1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis/inner wing (6.1.1 (c) (i))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill panel |5.3.6 |a| |i||1
Power steering pipe/hose leaking from reservoir to rack |2.1.5 |a||1
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/s inner sill at rear corroded (6.2.2 (d) (i))1
Offside Front Anti-roll bar fractured drop link broken (5.3.3 (b) (ii))1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s rear inner and outer sill corroded |6.1.B.2|1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting o/s front inner sill corroded |6.2.2 |d| |i||1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting o/s outer sill corroded at rear |6.2.2 |d| |i||1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s and n/s inner sills corroded |6.1.B.2|1
Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis leg |5.3.3 |b| |i||1
Offside Front Steering component mounting prescribed area is excessively corroded inner sill |2.1.2 |e| |i||1
Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill to chassis |6.1.B.2|1
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill panel (7.1.1 (a) (i))1
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill panel (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area is excessively corroded outter sill |5.2.6|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point |6.1.B.2|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point |6.1.B.2|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner wheels arch (7.1.1 (a) (i))1
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis leg/Jacking point area below drivers foot well (6.2.2 (d) (i))1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SEAL (6.2.2 (d) (i))1
Offside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SEAL (6.2.2 (d) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced WHEEL ARCH LINING (6.1.1 (c) (i))1
Nearside Parking brake inoperative on one side Zero effort. |1.4.1 |a||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch, marked yellow (5.3.6 (a) (i))1
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside inner sill |6.1.1 |c| |i||1
Offside Track rod end ball joint dust cover missing |2.2.C.1c|1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner seal (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner seal (6.1.1 (c) (i))1
Offside Rear Battery insecure and likely to cause a short circuit |4.13 |a| |ii||1
Suspension component mounting prescribed area is excessively corroded both floors front |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis length |2.4.A.3|1
Nearside Rear Anti-lock braking system component missing ABS SENSOR. |3.4.2|1
Nearside Front Suspension component mounting prescribed area is excessively corroded CHASSIS RAIL |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded CHASSIS RAIL. |2.4.A.3|1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill yellow chalked (7.1.1 (a) (i))1
Offside Front Suspension arm insecurely attached Top Arm Unsecured Long bolt not tight (5.3.3 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill X2 |7.1.1 |a| |i||1
Offside Front Upper Suspension arm ball joint likely to become detached ball joint not secure in suspension arm |5.3.4 |a| |ii||1
Power steering inoperative |2.1.5 |c| |i||1
Rear Service brake excessively binding Both |1.2.1 |f||1
Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sides outer sills |6.1.B.2|1
Central Seat belt anchorage prescribed area is excessively corroded sill |5.2.6|1
Offside Front Torque/reaction arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Front Lower Suspension arm ball joint excessively worn ball joint has excessively worn |5.3.4 |a| |i||1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor pan (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber top mounting area (5.3.6 (a) (i))1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor pan (5.3.6 (a) (i))1
Nearside Front Hazard warning switch faulty |1.4.B.1d|1
Offside Hazard warning switch faulty |1.4.B.1d|1
Seat belt anchorage prescribed area strength or continuity significantly reduced Offside floor to sill (7.1.1 (a) (i))1
Seat belt anchorage prescribed area strength or continuity significantly reduced nearside floor to sill (7.1.1 (a) (i))1
Seat belt anchorage prescribed area strength or continuity significantly reduced Nearside center floor (7.1.1 (a) (i))1
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing (5.3.6 (a) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting FLOOR (6.2.2 (d) (i))1
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bearing |2.4.G.2|1
Offside Rear Anti-roll bar linkage has excessive play in a pin/bearing |2.4.G.2|1
Nearside Rear coil spring corroded so that its cross sectional area is reduced and seriously weakened |2.4.C.1b|1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front and rear of sill |6.1.1 |c| |i||1
Exhaust has a major leak of exhaust gases centre / rear sections (6.1.2 (a))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By front upper suspension mount (5.3.6 (a) (i))1
Offside Rear Body panel corroded and likely to cause injury Wheel Arch Corroded And Has Sharp Edge (6.2.1 (a) (i))1
Nearside Front Steering locking device missing track rod end split pin corroded away |2.2.C.1g|1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2|1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill |6.1.B.2|1
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front to rear floor (6.2.2 (d) (i))1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor (6.2.2 (d) (i))1
Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch at rear (5.3.6 (a) (i))1
Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch at rear (5.3.6 (a) (i))1
Offside Rear Upper Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch at front (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in engine bay (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength engine bay chassis (5.3.6 (a) (i))1
Offside Front Lower Anti-roll bar linkage ball joint likely to become detached broken away (5.3.4 (a) (ii))1
Exhaust has a major leak of exhaust gases centre to rear exhaust (6.1.2 (a))1
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis behind wheel (5.3.6 (a) (ii))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill within 30cms (5.3.6 (a) (i))1
Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill area (6.2.2 (d) (i))1
Service brake excessively fluctuating (1.2.1 (e))1
Body component damaged and likely to cause injury F/REG PLATE (6.2.1 (a) (i))1
Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction stickers (3.1 (a) (ii))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill marked in chalk |7.1.1 |a| |i||1
Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired floor/inner sill (6.2.2 (d) (ii))1
Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired floor/inner sill (6.2.2 (d) (ii))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing area (6.1.1 (c) (i))1
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail repaired with fibreglass (6.1.1 (c) (i))1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail repaired with fibreglass (6.1.1 (c) (i))1
Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both inner wings (5.3.6 (a) (i))1
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both inner sills (5.3.6 (a) (i))1
Offside Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6|1
Nearside Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6|1
Exhaust emissions likely to be affected by an exhaust leak mid & rear (8.2.1.1 (b))1
Nearside Front Suspension component mounting prescribed area is excessively corroded antiroll bar |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded antiroll bar |2.4.A.3|1
Offside Rear Anti-roll bar linkage ball joint dust cover missing (5.3.4 (b) (ii))1
Offside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering where anti roll bar mounting is (6.1.1 (a) (ii))1
Offside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering in wheel arch (6.1.1 (a) (ii))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced where joins floor, including floor and to inner sil (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sil (6.1.1 (c) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced where anti roll bar mounting is (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced where anti roll bar mounting is (6.1.1 (c) (i))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sil (6.1.1 (c) (i))1
Offside Rear Valve stem seriously damaged badly perished and cracked |4.1.D.1e|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill closing panel |7.1.1 |a| |i||1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill closing panel |7.1.1 |a| |i||1
Rear Exhaust has a major leak of exhaust gases Rear and centre sections blowing. (6.1.2 (a))1
Nearside Rear Anti-roll bar linkage insecure and impairing directional stability drop link snapped (5.3.3 (a) (ii))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer rear sill |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer rear sill |5.3.6 |a| |i||1
Nearside Front Upper Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis next to anti-roll bar mount |2.4.A.3|1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis under wheel arch |2.4.A.3|1
Suspension component mounting prescribed area is excessively corroded both sills |2.4.A.3|1
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))1
Front brake caliper has restricted free movement both |3.5.1k|1
Central Brake pipe leaking |3.6.A.1|1
Offside Inner Rear Road wheel badly damaged |4.2.A.1a|1
Offside Front Body panel corroded and likely to cause injury (6.2.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength round anti rollbar mounting and cross member |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area is inadequately repaired round crossmember and rollbar mountings |5.3.6 |a| |i||1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sills |6.2.2 |d| |i||1
Nearside Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Emissions not tested exhaust fault (8.2.1.2 (d))1
Offside Front suspension retaining device missing |2.5.A.4|1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor-to-sill (6.1.1 (c) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor-to-sill (6.1.1 (c) (i))1
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Body sill (6.1.1 (c) (i))1
Nearside Rear Axle beam cracked |2.5.A.5a|1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i||1
Rear Parking brake lever defective so that it cannot be satisfactorily operated Rear handbrake / parking brake stick On. |1.1.6 |d||1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill badly corroded (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill badly corroded (7.1.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail inner wheel arch above cover by antiroll bar mount (5.3.6 (a) (i))1
Seat belt anchorage prescribed area strength or continuity significantly reduced OSR inner + outer sill / NSR outer sill (7.1.1 (a) (i))1
Offside Rear Stop lamp(s) showing white light to the rear (4.3.3 (a) (ii))1
Exhaust has a major leak of exhaust gases Leaking from the rear box area (6.1.2 (a))1
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt Bottom arm (5.3.4 (b) (ii))1
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt Bottom arm (5.3.4 (b) (ii))1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg area. |6.1.1 |c| |ii||1
Nearside Rear Anti-roll bar linkage damaged and seriously weakened (5.3.3 (b) (i))1
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch |6.2.2 |d| |i||1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor |6.2.2 |d| |i||1
Battery insecure and likely to fall from carrier battery excessively corroded and holed |4.13 |a| |ii||1
Brake lever has insufficient reserve travel Hand Brake No Reserve Travel (1.1.2 (a))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor panel (7.1.1 (a) (i))1
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner body sill corrosion (7.1.1 (a) (i))1
Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer body sill corrosion (7.1.1 (a) (i))1
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded floor at sill connection |5.2.6|1
Offside Front Position lamp light intensity significantly reduced very dim |4.2.3 |a| |ii||1
Nearside Rear Exhaust has a major leak of exhaust gases inter exhaust pipe joint corroded and insecure |6.1.2 |a||1
Central Rear Exhaust has a major leak of exhaust gases inter exhaust pipe joint heavily corroded and leaking gas |7.1.2|1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front chassis leg areas antiroll bar (5.3.6 (a) (i))1
Rear Parking brake lever ratchet mechanism is broken |3.1.5|1
Nearside Rear Lower Suspension arm pin or bush excessively worn |5.3.4 |a| |i||1
Offside Rear Suspension arm insecurely attached bolts loose - see red chalk |5.3.3 |a| |i||1
Exhaust silencer insecure |8.1.1 |b| |i||1
Nearside Front Brake prescribed area is excessively corroded |1.1.21 |e| |i||1
Offside Front Brake prescribed area is excessively corroded |1.1.21 |e| |i||1
Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Front Subframe mounting prescribed area is excessively corroded chassis under wing |2.4.A.3|1
Offside Front Subframe mounting prescribed area is excessively corroded chassis under wing |2.4.A.3|1
Nearside Rear Lower Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii))1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassic |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassic |2.4.A.3|1
Brake performance not tested due to leaking brake pipe (1.2.1 (g))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor area (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor area (5.3.6 (a) (i))1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill. |6.1.B.2|1
Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2|1
Offside Front Lower Anti-roll bar linkage insecure ball joints broken |2.4.G.1|1
Subframe mounting prescribed area is excessively corroded Both rear outer sills |2.4.A.3|1
Emissions unable to be completed excess smell (8.2.1.2 (d))1
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill panel (5.3.6 (a) (i))1
Offside Seat belt anchorage prescribed area is excessively corroded chassis leg |5.2.6|1
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rotten near anti roll bar mount (6.2.2 (d) (i))1
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rotten near anti roll bar mount (6.2.2 (d) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced towards the front of the rear inner arch (7.1.1 (a) (i))1
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded Sill. |5.2.6|1
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded Sill. |5.2.6|1
Vehicle structure has excessive corrosion which adversely affects braking or steering both sides front +both inner sills to chassis (6.1.1 (c) (ii))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe frame mounting chassis (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti-roll bar mounting chassis (5.3.6 (a) (i))1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor area inner and outer sill |6.1.B.2|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor area and inner and outer sill |6.1.B.2|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer chassis leg |6.1.B.2|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2|1
Anti-roll bar linkage missing |2.4.G.1|1
Power steering malfunctioning drive belt loose and not correctly fitted |2.1.5 |a||1
Offside Brake pipe at imminent risk of failure or fracture front to rear |1.1.11 |a||1
Offside Brake pipe leaking on a hydraulic braking system front to rear |1.1.11 |b| |ii||1
Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rails both sides (5.3.6 (a) (i))1
Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt all (5.3.4 (b) (ii))1
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill / floor |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill / floor |2.4.A.3|1
Offside Outer Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill and sill lip (7.1.1 (a) (i))1
Rear Brake pipe excessively damaged across axle (1.1.11 (c))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill under vehicle (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer/inner sill panel |5.2.6|1
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))1
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch corrosion near suspension component (6.1.1 (c) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor corrosion resulting in a hole |7.1.1 |a| |i||1
Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired Sill |2.4.A.3|1
Offside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering chassis rail at anti roll bar support (6.1.1 (a) (ii))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced end of sill (6.1.1 (c) (i))1
Emissions not tested wont idle |7.3.A.1|1
Nearside Electrical wiring insecure headlamp |1.9.2a|1
Offside Electrical wiring insecure headlamp |1.9.2a|1
Offside rear brake recording little or no effort park brake |3.7.B.5a|1
Braking system leaking Main front to rear steel pipe |3.6.A.1|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded Corroded behind sill panel |5.2.6|1
Nearside Rear Anti-roll bar linkage corroded and seriously weakened |2.4.G.1|1
Service brake effort inadequate at a wheel All four wheels (1.2.1 (a) (i))1
Nearside Seat belt anchorage prescribed area is excessively corroded outter sill |5.2.6|1
Exhaust shield missing where fitted as original equipment creating a risk of fire heat shield on front pipe (6.1.3 (e))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner + outer sill (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner cill under vehicle (5.3.6 (a) (i))1
Offside Rear Battery insecure and likely to fall from carrier floor corroded |4.13 |a| |ii||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arb mounting point |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arb mounting point |5.3.6 |a| |i||1
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corroded |6.1.B.2|1
Offside Front Suspension component mounting prescribed area is excessively corroded chassis X2 |2.4.A.3|1
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded Sill aria. |5.2.6|1
Nearside Lower Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired side sill area, front and rear of vehicle (6.2.2 (d) (ii))1
Offside Front Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired side sill, front and rear of vehicle (6.2.2 (d) (ii))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner cill to floor (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner cill to floor (6.1.1 (c) (i))1
Nearside Integral body structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i))1
Offside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength strut tower (5.3.6 (a) (i))1
Nearside Front Lower Anti-roll bar linkage attachment bracket/mounting fractured |5.3.3 |b| |ii||1
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill/floor |2.4.A.3|1
Nearside Front Anti-roll bar linkage insecure broken |2.4.G.1|1
Stop lamp(s) not working BOTH (4.3.1 (a) (ii))1
Front Headlamp not working on main beam |1.7.5a|1
Nearside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced marked in yellow |2.4.G.1|1
Offside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced marked in yellow |2.4.G.1|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower wheel arch to floor (5.3.6 (a) (i))1
Offside Rear Seat belt anchorage prescribed area is excessively corroded Floor to sill |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Floor to sill |5.2.6|1
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer body sills |6.1.B.2|1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/floor corroded and weak (7.1.1 (a) (i))1
Offside Brake pipe leaking on a hydraulic braking system On chassis , burst on roller brake test. (1.1.11 (b) (ii))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sills inner sill and suspension mount piont |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill inner sill suspension mount piont |5.3.6 |a| |i||1
Offside Front Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings NSF and NSR sill |6.1.B.2|1
Vehicle structure has excessive corrosion which adversely affects braking or steering NSR + OSR outer sills (6.1.1 (c) (ii))1
Vehicle structure has excessive corrosion which adversely affects braking or steering NSR inner sill to floor (6.1.1 (c) (ii))1
Vehicle structure has excessive corrosion which adversely affects braking or steering NSF + OSF chassis corroded (6.1.1 (c) (ii))1
Vehicle structure has excessive corrosion which adversely affects braking or steering OSF inner arch (6.1.1 (c) (ii))1
Suspension arm corroded and seriously weakened OSR lower arm corroded (5.3.3 (b) (i))1
Service brake excessively binding NSF (1.2.1 (f))1
Coil spring fractured or broken NSR (5.3.1 (b) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg around antiroll bar and subframe mount (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg around antiroll bar and subframe mount (5.3.6 (a) (i))1
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill back (7.1.1 (a) (i))1
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill back (7.1.1 (a) (i))1
Seat belt anchorage prescribed area strength or continuity significantly reduced both rear outer sills |7.1.1 |a| |i||1
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i))1
Passengers airbag obviously inoperative (7.1.5 (c))1
Offside Front Upper Anti-roll bar has excessive play in a ball joint drop link |2.4.G.2|1
Offside Front Suspension component mounting prescribed area is excessively corroded inner wing/box section through arch |2.4.A.3|1
Front Brake fluid not visible (1.1.10 (d) (iii))1
Brake performance not tested Serious Fluid Leak O/S/R Pipe (1.2.1 (g))1
Offside Front Driver`s airbag missing steering wheel air bag |7.1.5 |a||1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ANTI ROLL BAR MOUNTING POINT (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ANTI ROLL BAR MOUNTING POINT (5.3.6 (a) (i))1
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits reading 0.53 (8.2.1.2 (b))1
Offside Front Outer Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i||1
Front Service brake imbalanced across an axle nsf osf (1.2.1 (b) (i))1
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded body sill |5.2.6|1
Offside Seat belt anchorage prescribed area is excessively corroded outer sill corroderd |5.2.6|1
Nearside Ball joint has excessive play |2.2.B.1f|1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch holed |6.1.B.2|1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch holed |6.1.B.2|1
Nearside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed. |6.1.B.2|1
Offside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill holed. |6.1.B.2|1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to sill (6.1.1 (c) (i))1
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor to sill (6.2.2 (d) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to sill (6.1.1 (c) (i))1
Nearside Front Floor excessively deteriorated inner sill to floor holed and corroded (6.2.4 (a) (i))1
Offside Front Floor excessively deteriorated inner sill to floor holed and corroded (6.2.4 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch hold and corroded (5.3.6 (a) (i))1
Position lamp missing Both front (4.2.1 (a) (ii))1
Brakes imbalanced across an axle1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy