| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 2976 |
| Registration plate lamp issues | 2691 |
| Headlamp aim out of alignment | 2456 |
| Brake pipe excessively corroded | 1571 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 968 |
| Brakes imbalanced across an axle | 951 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 900 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 837 |
| Anti-lock braking system warning lamp indicates an ABS fault | 826 |
| Parking brake: efficiency below requirements |3.7.B.7| | 790 |
| Rear parking brake recording little or no effort | 750 |
| Registration plate issues | 690 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 674 |
| Parking brake lever has no reserve travel |3.1.6b| | 352 |
| Rear brake disc in such a condition that it is seriously weakened | 326 |
| Offside front brake binding |3.7.B.1| | 320 |
| Rear brake binding | 295 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 292 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 280 |
| Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 275 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 245 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 242 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 239 |
| Front brake application uneven | 232 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 230 |
| Offside Front front brake binding |3.7.B.1| | 227 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 227 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 215 |
| Nearside front brake binding |3.7.B.1| | 209 |
| Front brake disc in such a condition that it is seriously weakened | 202 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 201 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 196 |
| Offside Rear coil spring broken |2.4.C.1a| | 176 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 175 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 164 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 161 |
| Offside Stop lamp not working |1.2.1b| | 160 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 158 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 153 |
| Offside Rear brake caliper leaking |3.6.A.1| | 140 |
| Service brake: efficiency below requirements |3.7.B.7| | 134 |
| Nearside Front front brake binding |3.7.B.1| | 134 |
| Offside Front brake disc excessively pitted |3.5.1h| | 131 |
| Nearside Rear coil spring broken |2.4.C.1a| | 128 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 128 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 127 |
| Nearside Stop lamp not working |1.2.1b| | 125 |
| Nearside Rear brake caliper leaking |3.6.A.1| | 122 |
| Nearside Front brake disc excessively pitted |3.5.1h| | 120 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 116 |
| Mechanical brake component has restricted free movement | 114 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits |8.2.1.2 |c|| | 113 |
| Brake hose excessively deteriorated | 112 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 105 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 100 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 100 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 99 |
| Nearside Front coil spring broken |2.4.C.1a| | 94 |
| Offside Front Position lamp not working |4.2.1 |a|| | 94 |
| Nearside Front Service brake excessively binding (1.2.1 (f)) | 93 |
| Centre Stop lamp not working |1.2.1b| | 92 |
| Rear brake application uneven | 91 |
| Offside Rear Coil spring fractured or broken (5.3.1 (b) (i)) | 89 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 88 |
| Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 87 |
| Nearside Rear brake disc excessively pitted |3.5.1h| | 86 |
| Offside Rear brake disc excessively pitted |3.5.1h| | 86 |
| Offside Headlamp not working on main beam |1.7.5a| | 83 |
| Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 81 |
| Offside Rear Braking system leaking |3.6.A.1| | 80 |
| Nearside Front Position lamp not working |4.2.1 |a|| | 80 |
| Offside Front Anti-roll bar linkage insecure |2.4.G.1| | 78 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 77 |
| Windscreen washer not working | 75 |
| Nearside Headlamp not working on main beam |1.7.5a| | 74 |
| Windscreen wiper blade insecure | 74 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits |8.2.1.2 |b|| | 73 |
| Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i)) | 72 |
| Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 72 |
| Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 71 |
| Supplementary Restraint System warning lamp indicates a fault |5.4.2| | 70 |
| Windscreen has damage | 68 |
| Nearside Rear Braking system leaking |3.6.A.1| | 68 |
| Front brake disc excessively pitted |3.5.1h| | 66 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 60 |
| Battery insecure |1.9.1| | 60 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 59 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 59 |
| Offside Rear coil spring fractured |2.4.C.1a| | 59 |
| Offside Front coil spring broken |2.4.C.1a| | 58 |
| Offside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 58 |
| Offside Front Anti-roll bar linkage fractured |2.4.G.1| | 55 |
| Front brake excessively fluctuating | 55 |
| Front position lamp|s| not working |1.1.A.3b| | 55 |
| Nearside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 55 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 54 |
| Offside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 54 |
| Offside Rear Lower Suspension arm corroded and seriously weakened |2.4.G.1| | 53 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 52 |
| Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 52 |
| Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b)) | 51 |
| Engine MIL inoperative or indicates a malfunction |8.2.1.2 |h|| | 51 |
| Offside Rear Parking brake inoperative on one side (1.4.1 (a)) | 50 |
| Nearside Rear Stop lamp not working |1.2.1b| | 49 |
| Nearside Front Anti-roll bar linkage insecure |2.4.G.1| | 49 |
| Nearside Front Anti-roll bar linkage fractured |2.4.G.1| | 49 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 49 |
| Rear brake disc excessively pitted |3.5.1h| | 48 |
| Horn not working |1.6.2a| | 47 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 47 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer`s specified limits |8.2.1.2 |a|| | 47 |
| Nearside Rear Parking brake inoperative on one side (1.4.1 (a)) | 47 |
| Offside Rear Stop lamp not working |1.2.1b| | 46 |
| Nearside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 46 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 45 |
| Nearside Parking brake inoperative on one side (1.4.1 (a)) | 45 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 45 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 43 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 43 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 42 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 42 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 41 |
| Offside Rear Coil spring fractured or broken |5.3.1 |b| |i|| | 41 |
| Offside Front Service brake excessively binding |1.2.1 |f|| | 41 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 40 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 39 |
| Emissions not tested |7.3.A.1| | 39 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 38 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 38 |
| Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 37 |
| Brake fluid warning lamp illuminated |3.6.G.2| | 37 |
| Nearside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 37 |
| Nearside Rear Lower Suspension arm corroded and seriously weakened |2.4.G.1| | 37 |
| Offside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 37 |
| Nearside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 37 |
| Nearside Front Service brake excessively binding |1.2.1 |f|| | 37 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 37 |
| Power steering pipe|s| or hose|s| leaking |2.3.3b| | 37 |
| Offside Rear fog lamp not working |1.3.2b| | 36 |
| Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 36 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 36 |
| Nearside Rear Coil spring fractured or broken |5.3.1 |b| |i|| | 36 |
| Offside Parking brake inoperative on one side (1.4.1 (a)) | 36 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 36 |
| Supplementary restraint system warning lamp indicates a fault (7.1.6 (a)) | 36 |
| Emissions not tested |7.0| | 36 |
| Rear Mechanical brake component has restricted free movement | 36 |
| Nearside Rear coil spring fractured |2.4.C.1a| | 36 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 35 |
| Emissions not tested (8.2.1.2 (d)) | 35 |
| Rear fog lamp not working |1.3.2b| | 34 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 34 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 34 |
| Offside Windscreen wiper blade deteriorated |8.2.2| | 33 |
| Nearside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i)) | 33 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 32 |
| Nearside Side repeater not working |1.4.A.2c| | 31 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 30 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 30 |
| Nearside Front Headlamp not working on main beam |1.7.5a| | 30 |
| Offside Front Windscreen wiper blade deteriorated |8.2.2| | 29 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 29 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 29 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 28 |
| Nearside Front coil spring fractured |2.4.C.1a| | 28 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 28 |
| Offside Front Coil spring fractured or broken |5.3.1 |b| |i|| | 28 |
| Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 27 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 27 |
| Nearside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 27 |
| Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 27 |
| Offside Rear Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 26 |
| Offside Rear Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 26 |
| Nearside Front Coil spring fractured or broken |5.3.1 |b| |i|| | 26 |
| Nearside Windscreen wiper blade deteriorated |8.2.2| | 25 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 25 |
| Nearside Rear Anti-roll bar linkage insecure |2.4.G.1| | 25 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 25 |
| Rear Exhaust system not adequately supported |7.1.1| | 25 |
| Brake performance not tested |3.7.A.1| | 25 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 25 |
| Offside Front Headlamp not working on main beam |1.7.5a| | 25 |
| rear parking |secondary| brakes imbalanced | 24 |
| Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 24 |
| Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 24 |
| Offside Steering rack gaiter split |2.2.D.2d| | 24 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 23 |
| Offside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 23 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 23 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 23 |
| Offside Side repeater not working |1.4.A.2c| | 23 |
| Nearside Parking brake inoperative on one side |1.4.1 |a|| | 23 |
| Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 23 |
| front brakes release unevenly |3.7.B.4| | 23 |
| Power steering component|s| leaking |2.3.3b| | 23 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 23 |
| Offside Rear coil spring incomplete |2.4.C.1a| | 23 |
| Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 22 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 22 |
| Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 22 |
| Offside Rear Upper Suspension arm corroded and seriously weakened |2.4.G.1| | 22 |
| Offside Parking brake inoperative on one side |1.4.1 |a|| | 22 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 22 |
| Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 22 |
| Supplementary restraint system warning lamp indicates a fault |7.1.6 |a|| | 22 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 22 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 22 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 21 |
| Nearside Rear Parking brake inoperative on one side |1.4.1 |a|| | 21 |
| Nearside Rear Anti-roll bar linkage fractured |2.4.G.1| | 21 |
| Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 21 |
| Offside Rear Parking brake inoperative on one side |1.4.1 |a|| | 21 |
| Offside Stop lamp|s| not working |4.3.1 |a| |ii|| | 21 |
| Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 21 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 21 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 21 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 21 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 21 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 21 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 21 |
| Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 21 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 21 |
| Headlamp aim out of alignment | 20 |
| Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 20 |
| Offside Rear Anti-roll bar linkage insecure |2.4.G.1| | 20 |
| Service brake efficiency below requirements |1.2.2 |a| |i|| | 20 |
| Brake pedal spongy |3.3.B.1b| | 20 |
| Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 20 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 20 |
| Brake performance not tested (1.2.1 (g)) | 20 |
| Nearside Rear Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 20 |
| Horn not working (7.7 (a)) | 19 |
| Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 19 |
| Offside rear brake excessively fluctuating |3.7.B.3| | 19 |
| Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 19 |
| Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 19 |
| Nearside Rear Hydraulic brake calliper leaking |1.1.16 |b| |i|| | 19 |
| Parking brake lever has excessive movement indicating incorrect adjustment |1.1.6 |c|| | 19 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 19 |
| Central Stop lamp not working |1.2.1b| | 19 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 19 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 19 |
| Offside front brake juddering severely |3.7.A.2b| | 19 |
| Nearside Front brake caliper has restricted free movement |3.5.1k| | 19 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 19 |
| Rear fog lamp tell tale not working |1.3.1b| | 18 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 18 |
| Offside Front brake disc excessively scored |3.5.1h| | 18 |
| Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 18 |
| Nearside Rear Upper Suspension arm corroded and seriously weakened |2.4.G.1| | 18 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 18 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 18 |
| Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 18 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 18 |
| Offside Headlamp aim not tested |1.8.A.1c| | 18 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 18 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 18 |
| Emissions not tested |8.2.1.2 |d|| | 18 |
| Windscreen wiper does not clear the windscreen effectively | 17 |
| Exhaust carbon monoxide content at idle exceeds manufacturers specified limits (8.2.1.2 (b)) | 17 |
| Offside Front Shock absorber has a serious fluid leak |2.7.3| | 17 |
| Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 17 |
| Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 17 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 17 |
| Nearside Front brake disc excessively scored |3.5.1h| | 17 |
| Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 17 |
| Offside Rear Hydraulic brake calliper leaking |1.1.16 |b| |i|| | 17 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 17 |
| Offside Rear Braking system leaking caliper |3.6.A.1| | 17 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 17 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 17 |
| Horn not working |7.7 |a| |ii|| | 17 |
| Offside Front Wheel nut|s| missing |4.2.A.1e| | 17 |
| Offside Front brake caliper has restricted free movement |3.5.1k| | 17 |
| Nearside Front All position lamps not working |1.1.A.3b| | 17 |
| Offside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i)) | 17 |
| Brake hose damaged | 17 |
| Offside Front wheel bearing rough when rotated |2.5.A.2| | 17 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 17 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 16 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 16 |
| Offside Front coil spring fractured |2.4.C.1a| | 16 |
| Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 16 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 16 |
| Nearside Front Shock absorbers has a serious fluid leak | 16 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 16 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 15 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 15 |
| Anti-lock braking system warning lamp does not illuminate |3.4.1b| | 15 |
| Nearside rear brake excessively fluctuating |3.7.B.3| | 15 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 15 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 15 |
| Offside Rear Anti-roll bar linkage fractured |2.4.G.1| | 15 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 15 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 15 |
| Central Exhaust has a major leak of exhaust gases |7.1.2| | 15 |
| Power steering pipe/hose leaking |2.1.5 |a|| | 15 |
| Nearside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 15 |
| Braking system leaking |3.6.A.1| | 15 |
| Brake lever has insufficient reserve travel (1.1.2 (a)) | 15 |
| Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 15 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 15 |
| Nearside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 14 |
| Nearside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 14 |
| Offside Headlamp insecure |1.7.3| | 14 |
| Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 14 |
| Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 14 |
| Rear Parking brake lever has no reserve travel |3.1.6b| | 14 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 14 |
| Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 14 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 14 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 14 |
| Offside Front Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 14 |
| Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 14 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds default limits |8.2.1.2 |b|| | 14 |
| Offside Front position lamp|s| incorrect colour |1.1.A.3e| | 14 |
| Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 14 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 14 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 14 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 14 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 13 |
| Offside Rear brake disc excessively scored |3.5.1h| | 13 |
| Power steering pipe/hose leaking (2.1.5 (a)) | 13 |
| Front Front position lamp|s| not working |1.1.A.3b| | 13 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 13 |
| Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 13 |
| Nearside Rear coil spring incomplete |2.4.C.1a| | 13 |
| Nearside Front Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 13 |
| Offside Rear Brake pipe leaking |3.6.A.1| | 13 |
| Nearside Rear Service brake excessively binding |1.2.1 |f|| | 13 |
| Power steering fluid level below minimum |2.3.1| | 13 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 13 |
| Offside Front All position lamps not working |1.1.A.3b| | 13 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 13 |
| Nearside Front An item not tested |Manual| | 13 |
| Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 13 |
| Nearside Front position lamp|s| incorrect colour |1.1.A.3e| | 13 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 13 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 13 |
| Nearside Headlamp not working on main beam |4.1.1 |a| |ii|| | 13 |
| Nearside Front Side repeater not working |1.4.A.2c| | 12 |
| Rear fog lamp switch faulty |1.3.1a| | 12 |
| Stop lamp not working |1.2.1b| | 12 |
| Offside Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 12 |
| Offside Rear Service brake excessively binding |1.2.1 |f|| | 12 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 12 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 12 |
| Power steering component leaking (2.1.5 (a)) | 12 |
| Offside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 12 |
| Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 12 |
| Offside Front Shock absorbers has a serious fluid leak | 12 |
| Power steering inoperative |2.3.3a| | 12 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 12 |
| Offside Rear front brake binding |3.7.B.1| | 12 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 12 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 12 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 12 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 12 |
| Nearside rear brake juddering severely |3.7.A.5b| | 12 |
| Horn not working (7.7 (a) (ii)) | 12 |
| Nearside Rear Braking system leaking caliper |3.6.A.1| | 12 |
| Offside Front An item not tested |Manual| | 12 |
| Offside Rear Shock absorbers has a serious fluid leak | 12 |
| Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 12 |
| Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 12 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 12 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 12 |
| Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 12 |
| Fuel cap/sealing device missing |7.2.4a| | 12 |
| Nearside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 12 |
| Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 12 |
| Rear Rear fog lamp not working |1.3.2b| | 11 |
| Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 11 |
| Brake hose has insufficient room to move | 11 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 11 |
| Exhaust emissions likely to be affected by an exhaust leak |8.2.1.1 |b|| | 11 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 11 |
| Nearside Rear brake disc excessively scored |3.5.1h| | 11 |
| Nearside Front Steering rack gaiter split |2.2.D.2d| | 11 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 11 |
| Front Windscreen wiper blade deteriorated |8.2.2| | 11 |
| Exhaust system not adequately supported |7.1.1| | 11 |
| Offside Track rod end ball joint has excessive play |2.2.B.1f| | 11 |
| Front brake disc excessively scored |3.5.1h| | 11 |
| Fuel cap/sealing device sealing washer missing |7.2.4c| | 11 |
| Offside Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 11 |
| Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 11 |
| Offside Front Braking system leaking |3.6.A.1| | 11 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 11 |
| Exhaust catalytic converter missing where one was fitted as standard |7.1.3| | 11 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 11 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 11 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 11 |
| Offside rear brake juddering severely |3.7.A.5b| | 11 |
| Centre Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 11 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 11 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 11 |
| Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a)) | 11 |
| Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 10 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 10 |
| Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 10 |
| Oil leaking excessively from engine (8.4.1 (a) (i)) | 10 |
| Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 10 |
| Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 10 |
| Exhaust carbon monoxide content at idle exceeds default limits |8.2.1.2 |b|| | 10 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 10 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 10 |
| Nearside Rear rear brake excessively fluctuating |3.7.B.3| | 10 |
| Nearside Rear Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 10 |
| Nearside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 10 |
| Offside Front brake caliper leaking |3.6.A.1| | 10 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 10 |
| Rear Exhaust system insecure (6.1.2 (a)) | 10 |
| Central Stop lamp(s) not working (4.3.1 (a) (ii)) | 10 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 10 |
| Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 10 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 10 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 10 |
| Brake performance not tested |1.2.1 |g|| | 10 |
| Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 10 |
| An item not tested |Manual| | 10 |
| Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 10 |
| Offside Rear fog lamp emits a light other than red |1.3.2e| | 10 |
| Parking brake: efficiency below requirements |3.7.B.7| | 9 |
| Parking brake: efficiency below requirements |3.7.D.4| | 9 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 9 |
| Offside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 9 |
| Offside Front Anti-roll bar insecure |2.4.G.1| | 9 |
| Nearside Rear Road wheel bead rim badly distorted |4.2.A.1a| | 9 |
| Nearside Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 9 |
| Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 9 |
| Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 9 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 9 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 9 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 9 |
| Offside Front Steering rack gaiter split |2.2.D.2d| | 9 |
| Nearside Front Road wheel bead rim badly distorted |4.2.A.1a| | 9 |
| Offside Rear Lower Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 9 |
| Offside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 9 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 9 |
| Offside Front Road wheel fixing missing (5.2.1 (a) (i)) | 9 |
| Offside Rear Road wheel bead rim badly distorted |4.2.A.1a| | 9 |
| Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 9 |
| front brake binding |3.7.B.1| | 9 |
| Front front brake binding |3.7.B.1| | 9 |
| Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 9 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 9 |
| Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 9 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 9 |
| Centre Rear Stop lamp not working |1.2.1b| | 9 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 9 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 9 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 9 |
| Nearside Rear Brake pipe leaking |3.6.A.1| | 9 |
| Offside Front Direction indicator not working |1.4.A.2c| | 9 |
| Driver`s seat insecure |6.2.A.1| | 9 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 9 |
| Offside Rear Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 9 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 9 |
| Nearside Headlamp insecure |1.7.3| | 9 |
| Nearside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 9 |
| Nearside Rear front brake binding |3.7.B.1| | 9 |
| Main beam `tell-tale` not working |1.7.4c| | 9 |
| Offside Front Suspension arm corroded and seriously weakened |2.4.G.1| | 9 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 9 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 9 |
| Brake pedal anti-slip provision incomplete |3.3.A.1b| | 9 |
| Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 9 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 9 |
| Registration plate lamp issues | 8 |
| Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
| Offside Headlamp not working on main beam |4.1.1 |a| |ii|| | 8 |
| Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 8 |
| Offside Front Position lamp not working |4.2.1 |a| |ii|| | 8 |
| Nearside Rear Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 8 |
| Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 8 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 8 |
| Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 8 |
| Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 8 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 8 |
| Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 8 |
| Nearside Front Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 8 |
| Offside Rear Upper Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 8 |
| Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 8 |
| Nearside Rear brake caliper has restricted free movement |3.5.1k| | 8 |
| Brake pipe leaking |3.6.A.1| | 8 |
| Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 8 |
| Nearside Front coil spring incomplete |2.4.C.1a| | 8 |
| Offside Front Direction indicator incorrect colour |1.4.A.2f| | 8 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 8 |
| Offside Inner Front brake disc excessively pitted |3.5.1h| | 8 |
| Nearside Front Front position lamp|s| incorrect colour |1.1.A.3e| | 8 |
| Offside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 8 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
| Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 8 |
| Nearside Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 8 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 8 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 8 |
| Exhaust carbon monoxide content at idle exceeds manufacturer`s specified limits |8.2.1.2 |b|| | 8 |
| Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 8 |
| Offside Front front brake juddering severely |3.7.A.2b| | 8 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 8 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 8 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 8 |
| Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 8 |
| Offside Front Lower Suspension arm corroded and seriously weakened |2.4.G.1| | 8 |
| Nearside front brake juddering severely |3.7.A.2b| | 8 |
| Rear Exhaust has a part missing |7.1.1a| | 8 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6| | 8 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 8 |
| Offside Front Side repeater not working |1.4.A.2c| | 8 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 8 |
| Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 8 |
| Nearside Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 8 |
| rear brakes release unevenly |3.7.B.4| | 8 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 8 |
| Brake pipe excessively corroded | 7 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 7 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 7 |
| Nearside Front Service brake excessively fluctuating |1.2.1 |e|| | 7 |
| Offside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 7 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 7 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 7 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 7 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 7 |
| Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 7 |
| Central Stop lamp|s| not working |4.3.1 |a| |ii|| | 7 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 7 |
| Offside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 7 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 7 |
| Headlamp not working on dipped beam |1.7.5a| | 7 |
| Headlamp aim not tested |1.8.A.1c| | 7 |
| Offside Headlamp aim not tested (4.1.2 (b)) | 7 |
| Offside Front Valve stem seriously damaged (5.2.3 (j)) | 7 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 7 |
| Offside Rear Upper Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 7 |
| Offside Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 7 |
| Anti-lock braking system warning lamp does not illuminate (1.6 (a)) | 7 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 7 |
| Front position lamp|s| incorrect colour |1.1.A.3e| | 7 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 7 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 7 |
| Offside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 7 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 7 |
| Offside Headlamp light intensity severely reduced (4.1.4 (a)) | 7 |
| Offside Rear Wheel nut|s| missing |4.2.A.1e| | 7 |
| Offside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 7 |
| Offside Front Service brake excessively fluctuating |1.2.1 |e|| | 7 |
| Nearside Front Wheel nut|s| missing |4.2.A.1e| | 7 |
| Nearside Front Service brake excessively fluctuating (1.2.1 (e)) | 7 |
| Nearside Front Service brake lagging in operation (1.2.1 (d)) | 7 |
| Offside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 7 |
| Nearside Headlamp aim beam image kick up to the offside |1.8| | 7 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
| Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 7 |
| Offside Rear Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 7 |
| Offside Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 7 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 7 |
| Offside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 7 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 7 |
| Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 7 |
| Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 7 |
| Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 7 |
| Nearside Front Valve stem seriously damaged |4.1.D.1e| | 7 |
| Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.3.D.1| | 7 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 7 |
| Offside Front Anti-roll bar linkage missing |2.4.G.1| | 7 |
| Offside Rear Road wheel fixing missing (5.2.1 (a) (i)) | 7 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3| | 7 |
| Offside Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 7 |
| Nearside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 7 |
| Offside Front Body has a sharp edge caused by damage |6.1.C.1| | 7 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 7 |
| Drivers airbag missing (7.1.5 (a)) | 7 |
| Offside Front Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 7 |
| Brake lever has insufficient reserve travel |1.1.2 |a|| | 7 |
| Nearside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 7 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 6 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 6 |
| Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 6 |
| brake disc excessively pitted |3.5.1h| | 6 |
| Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 6 |
| Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 6 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 6 |
| Brake fluid significantly below minimum mark |1.1.10 |d| |ii|| | 6 |
| Nearside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 6 |
| Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 6 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 6 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 6 |
| Brake pedal creeps down while the pedal is held under pressure |3.3.B.1a| | 6 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 6 |
| Nearside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 6 |
| Nearside Headlamp levelling device inoperative (4.1.5 (a)) | 6 |
| Offside Front brake disc has restricted free movement |3.5.1j| | 6 |
| Horn sounds harsh or grating |1.6.2e| | 6 |
| Fuel cap/sealing device sealing washer deteriorated |7.2.4c| | 6 |
| Nearside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 6 |
| Offside Front Service brake lagging in operation (1.2.1 (d)) | 6 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 6 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 6 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 6 |
| Nearside Stop lamp|s| not working |4.3.1 |a| |ii|| | 6 |
| Centre Rear Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 6 |
| Offside Rear Rear position lamp|s| incorrect colour |1.1.A.3e| | 6 |
| Nearside Rear Valve stem seriously damaged |4.1.D.1e| | 6 |
| Brake pedal creeps down when held under pressure |3.3.B.1a| | 6 |
| Nearside Side repeater incorrect colour |1.4.A.2f| | 6 |
| Offside Front Front position lamp|s| incorrect colour |1.1.A.3e| | 6 |
| Offside Rear Service brake excessively fluctuating |1.2.1 |e|| | 6 |
| Nearside Rear Wheel nut|s| missing |4.2.A.1e| | 6 |
| Rear brake disc excessively scored |3.5.1h| | 6 |
| Front position lamp|s| not working both |1.1.A.3b| | 6 |
| Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 6 |
| Offside Rear Braking system leaking brake caliper |3.6.A.1| | 6 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 6 |
| Power steering malfunctioning |2.3.3a| | 6 |
| Offside Front Service brake excessively fluctuating (1.2.1 (e)) | 6 |
| Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 6 |
| Nearside Headlamp light intensity severely reduced (4.1.4 (a)) | 6 |
| Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 6 |
| Nearside Rear position lamp|s| incorrect colour |1.1.A.3e| | 6 |
| Body has a sharp edge caused by damage |6.1.C.1| | 6 |
| Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 6 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii)) | 6 |
| Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 6 |
| Fuel cap/sealing device ineffective (6.1.3 (b) (i)) | 6 |
| Exhaust engine idle speed too high |7.3.D.1| | 6 |
| Nearside Front brake caliper leaking |3.6.A.1| | 6 |
| Offside Seat belt retracting mechanism defective |5.2.5b| | 6 |
| Nearside Headlamp aim not tested |1.8.A.1c| | 6 |
| Front Brake lining|s| less than 1.5 mm thick |3.5.1g| | 6 |
| Offside Headlamp light source and lamp not compatible (4.1.4 (c)) | 6 |
| Offside Front Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) | 6 |
| Offside Rear Valve stem seriously damaged |4.1.D.1e| | 6 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 6 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 6 |
| Main beam tell-tale not working (4.9.1 (a) (ii)) | 6 |
| Nearside Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 6 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 6 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 6 |
| Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 6 |
| Offside Front Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 6 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 6 |
| Nearside Headlamp aim not tested (4.1.2 (b)) | 6 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 6 |
| Parking brake: efficiency below requirements (3.7.B.7) | 6 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 6 |
| Front Power steering pipe|s| or hose|s| leaking |2.3.3b| | 6 |
| Nearside Front Braking system leaking |3.6.A.1| | 6 |
| Offside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 6 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a)) | 6 |
| Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 6 |
| Nearside Front Valve stem seriously damaged (5.2.3 (j)) | 6 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 6 |
| Nearside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 6 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 6 |
| Anti-lock braking system warning lamp does not illuminate |1.6 |a|| | 6 |
| Offside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 6 |
| Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 6 |
| Offside Headlamp adversely affected by the operation of another lamp |1.7.5c| | 6 |
| Rear fog lamp not working |1.3.2b| | 5 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 5 |
| Rear fog lamp emits a light other than red |1.3.2e| | 5 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 5 |
| Nearside Front Position lamp not working |4.2.1 |a| |ii|| | 5 |
| Offside Front Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 5 |
| Offside Front Anti-roll bar linkage insecure and impairing directional stability |5.3.3 |a| |ii|| | 5 |
| Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 5 |
| Central Rear Stop lamp not working |1.2.1b| | 5 |
| Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 5 |
| Offside Front Lower Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 5 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 5 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 5 |
| Oil leaking excessively from engine |8.4.1 |a| |i|| | 5 |
| Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 5 |
| Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 5 |
| Front Power steering pipe/hose leaking (2.1.5 (a)) | 5 |
| Nearside Rear Valve stem seriously damaged (5.2.3 (j)) | 5 |
| Power steering inoperative and steering adversely affected |2.1.5 |c| |ii|| | 5 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 5 |
| Nearside Front Suspension arm corroded and seriously weakened |2.4.G.1| | 5 |
| Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 5 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 5 |
| Nearside Front Side repeater not working |4.4.1 |a| |ii|| | 5 |
| Nearside Side repeater not working |4.4.1 |a| |ii|| | 5 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 5 |
| Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 5 |
| Offside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 5 |
| Rear Brake pipe leaking |3.6.A.1| | 5 |
| Nearside Rear Shock absorbers has a serious fluid leak | 5 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer`s specified limits |8.2.1.2 |a|| | 5 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 5 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 5 |
| Offside Side repeater incorrect colour |1.4.A.2f| | 5 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 5 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Offside Front Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii)) | 5 |
| Offside Front Brake lining|s| less than 1.5 mm thick |3.5.1g| | 5 |
| Power steering malfunctioning (2.1.5 (a)) | 5 |
| Nearside Rear Service brake excessively fluctuating |1.2.1 |e|| | 5 |
| Offside Front Road wheel bead rim badly distorted |4.2.A.1a| | 5 |
| Nearside Rear Service brake excessively fluctuating (1.2.1 (e)) | 5 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 5 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 5 |
| Nearside Rear Hydraulic brake calliper leaking and braking performance affected (1.1.16 (b) (ii)) | 5 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 5 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 5 |
| Windscreen wiper blade deteriorated |8.2.2| | 5 |
| Offside Side repeater not working (4.4.1 (a) (ii)) | 5 |
| Offside Rear rear brake excessively fluctuating |3.7.B.3| | 5 |
| Nearside Front Headlamp light intensity severely reduced (4.1.4 (a)) | 5 |
| Offside Front Headlamp light intensity severely reduced (4.1.4 (a)) | 5 |
| Nearside Front Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 5 |
| Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 5 |
| Offside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 5 |
| Nearside Rear Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 5 |
| Offside Front Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 5 |
| Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 5 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 5 |
| Exhaust emissions - engine idle speed too high (8.2.1.2 (e)) | 5 |
| Stop lamp(s) all not working (4.3.1 (a) (iii)) | 5 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 5 |
| Nearside Headlamp lens seriously defective (4.1.1 (b) (ii)) | 5 |
| Offside Headlamp lens seriously defective (4.1.1 (b) (ii)) | 5 |
| Nearside Body has a sharp edge caused by damage |6.1.C.1| | 5 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 5 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill |7.1.1 |a| |i|| | 5 |
| Nearside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 5 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 5 |
| Offside Rear Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) | 5 |
| Brake fluid contaminated (1.8 (a)) | 5 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 5 |
| Nearside Rear Parking |secondary brake| on a single line braking system has inadequate effort at a wheel |1.3.1 |a| |i|| | 5 |
| Nearside Rear Lower Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 5 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 5 |
| Nearside Inner Front Road wheel bead rim badly distorted |4.2.A.1a| | 5 |
| Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 5 |
| Nearside Front Direction indicator not working |1.4.A.2c| | 5 |
| Offside Rear Service brake excessively fluctuating (1.2.1 (e)) | 5 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii)) | 5 |
| Nearside Rear Road wheel distorted |4.2.A.1a| | 5 |
| Rear Stop lamp not working |1.2.1b| | 5 |
| Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 5 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3| | 5 |
| Nearside Rear Service brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 5 |
| Rear Braking system leaking |3.6.A.1| | 5 |
| Nearside Headlamp light source and lamp not compatible (4.1.4 (c)) | 5 |
| Nearside Stop lamp emits other than a steady red light |1.2.1e| | 5 |
| Front front brake juddering severely |3.7.A.2b| | 5 |
| Rear Brake lining|s| less than 1.5 mm thick |3.5.1g| | 5 |
| Offside front brake grabbing severely |3.7.A.2b| | 5 |
| Nearside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 5 |
| Rear fog lamp not working |4.5.1 |a| |ii|| | 5 |
| Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 5 |
| Offside Rear Valve stem seriously damaged (5.2.3 (j)) | 5 |
| Nearside Front Headlamp insecure |1.7.3| | 5 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i)) | 5 |
| Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 5 |
| Nearside Rear Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 5 |
| Offside Front Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 5 |
| Rear parking brake recording little or no effort | 4 |
| Registration plate issues | 4 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 4 |
| Offside Rear Coil spring fractured or broken (5.3.1 (b) (i)) | 4 |
| Offside Inner Rear brake disc excessively pitted |3.5.1h| | 4 |
| Offside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 4 |
| Offside Front Service brake lagging in operation |1.2.1 |d|| | 4 |
| Offside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 4 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 4 |
| Offside Front Anti-roll bar linkage damaged and seriously weakened |2.4.G.1| | 4 |
| Nearside Position lamp not working (4.2.1 (a) (ii)) | 4 |
| Offside front brakes release unevenly |3.7.B.4| | 4 |
| Offside Headlamp levelling device inoperative (4.1.5 (a)) | 4 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 4 |
| Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 4 |
| Offside Rear Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 4 |
| Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 4 |
| Inner Front brake disc excessively pitted |3.5.1h| | 4 |
| Nearside Rear Upper Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 4 |
| Offside Front Hydraulic brake calliper leaking (1.1.16 (b) (i)) | 4 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 4 |
| Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 4 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Offside Rear Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Brake pedal has insufficient reserve movement |3.3.A.5| | 4 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 4 |
| Nearside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Exhaust has part of the system excessively deteriorated |7.1.1a| | 4 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Offside Side repeater not working |4.4.1 |a| |ii|| | 4 |
| Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 4 |
| Nearside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Brake pedal anti-slip provision missing |3.3.A.1b| | 4 |
| Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mount |2.4.A.3| | 4 |
| Offside Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 4 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 4 |
| Offside Outer Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6| | 4 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 4 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 4 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 4 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 4 |
| Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 4 |
| Offside Front position lamp(s) not working (1.1.A.3b) | 4 |
| Offside Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 4 |
| Power steering inoperative (2.1.5 (c) (i)) | 4 |
| Offside Front Anti-roll bar linkage insecurely attached |5.3.3 |a| |i|| | 4 |
| Nearside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 4 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill |6.2.2 |d| |i|| | 4 |
| Nearside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Offside Rear Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 4 |
| Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 4 |
| front brake juddering severely |3.7.A.2b| | 4 |
| Nearside Front Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 4 |
| Offside Rear Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 4 |
| Emissions not tested due to exhaust blow (8.2.1.2 (d)) | 4 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i)) | 4 |
| Windscreen wiper not operating automatically when switched on |8.2.1b| | 4 |
| Offside Rear coil spring cracked |2.4.C.1a| | 4 |
| Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 4 |
| Rear fog lamp missing (4.5.1 (a) (ii)) | 4 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 4 |
| Nearside Front Lower Suspension arm corroded and seriously weakened |2.4.G.1| | 4 |
| Offside Rear rear brake juddering severely |3.7.A.5b| | 4 |
| Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 4 |
| Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 4 |
| Rear rear brake excessively fluctuating |3.7.B.3| | 4 |
| Offside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 4 |
| Nearside Rear Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 4 |
| Driver`s airbag missing |5.4.1| | 4 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 4 |
| Rear Direction indicator incorrect colour |1.4.A.2f| | 4 |
| Nearside All position lamps not working |1.1.A.3b| | 4 |
| Offside Position lamp not working |4.2.1 |a|| | 4 |
| Offside Headlamp aim beam image kick up to the offside |1.8| | 4 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 4 |
| Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 4 |
| Exhaust emissions exceed manufacturers specified limit (8.2.2.2 (a)) | 4 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 4 |
| Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 4 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 4 |
| Nearside Outer Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 4 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 4 |
| Offside Front Valve stem seriously damaged |4.1.D.1e| | 4 |
| Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 4 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 4 |
| Front Exhaust system not adequately supported |7.1.1| | 4 |
| Nearside Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 4 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 4 |
| Offside Front Brake hose excessively twisted |1.1.12 |b| |ii|| | 4 |
| Centre Exhaust system not adequately supported |7.1.1| | 4 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 4 |
| Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 4 |
| Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 4 |
| Offside Rear Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 4 |
| Horn control missing |1.6.1| | 4 |
| Nearside Rear Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
| Nearside Front Anti-roll bar linkage insecurely attached |5.3.3 |a| |i|| | 4 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 4 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 4 |
| Offside Front Anti-roll bar linkage fractured |5.3.3 |b| |ii|| | 4 |
| Front Position lamp not working |4.2.1 |a|| | 4 |
| Nearside Rear wheel bearing rough when rotated |2.6.1| | 4 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 4 |
| Nearside Front Anti-roll bar linkage ball joint likely to become detached |5.3.4 |a| |ii|| | 4 |
| Nearside Rear Road wheel cracked |4.2.A.1a| | 4 |
| Rear rear brake recording little or no effort |3.7.B.5a| | 4 |
| Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
| Central Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 4 |
| Direction indicators not working |1.4.A.2c| | 4 |
| Nearside Front Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 4 |
| Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 4 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i)) | 4 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 4 |
| Nearside Rear Anti-roll bar linkage fractured (5.3.3 (b) (ii)) | 4 |
| Nearside Parking |secondary brake| on a single line braking system has inadequate effort at a wheel |1.3.1 |a| |i|| | 4 |
| Offside Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 4 |
| Offside Rear Battery insecure |1.9.1| | 4 |
| Power steering component leaking |2.1.5 |a|| | 4 |
| Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 4 |
| Offside Headlamp insecure |4.1.1 |c|| | 4 |
| Offside Front Tie bar/rod insecure |2.4.G.1| | 4 |
| Nearside Front position lamp(s) not working (1.1.A.3b) | 4 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 4 |
| Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 4 |
| Nearside Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 4 |
| Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 4 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 4 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 4 |
| Offside Rear Brake hose leaking |3.6.A.1| | 4 |
| Nearside Front Anti-roll bar linkage missing |2.4.G.1| | 4 |
| Offside Rear Stop lamp emits other than a steady red light |1.2.1e| | 4 |
| Offside Front Headlamp insecure (4.1.1 (c)) | 4 |
| Offside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 4 |
| Offside Front Headlamp insecure |1.7.3| | 4 |
| Nearside Rear Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 4 |
| Nearside Rear Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 4 |
| Offside Rear Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 4 |
| Nearside Windscreen wiper not operating automatically when switched on |8.2.1b| | 4 |
| Offside Windscreen wiper not operating automatically when switched on |8.2.1b| | 4 |
| Offside Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 4 |
| Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 4 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 4 |
| Offside Rear position lamp|s| incorrect colour |1.1.A.3e| | 4 |
| Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 4 |
| Nearside Inner Front brake disc excessively pitted |3.5.1h| | 4 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 3 |
| Brakes imbalanced across an axle | 3 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 3 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
| Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b)) | 3 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 3 |
| Nearside Rear Parking brake inoperative on one side (1.4.1 (a)) | 3 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 3 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 3 |
| Rear fog lamp does not emit a steady red light |1.3.2e| | 3 |
| Centre Rear fog lamp not working |1.3.2b| | 3 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 3 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 3 |
| Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Brake pipe leaking |3.6.A.1| | 3 |
| Offside Front Road wheel badly damaged |4.2.A.1a| | 3 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 3 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Offside Outer Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Offside Rear Direction indicator not working |1.4.A.2c| | 3 |
| Offside Front Brake pipe twisted |found during steering lock to lock check| |2.2.D.2b| | 3 |
| Offside Rear Anti-roll bar insecure |2.4.G.1| | 3 |
| Offside Rear Direction indicators incorrect colour |1.4.A.2f| | 3 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 3 |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 3 |
| Offside Front Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) | 3 |
| Nearside Front Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) | 3 |
| Exhaust has a major leak of exhaust gases rear box |7.1.2| | 3 |
| Offside Rear Body panel corroded and likely to cause injury (6.2.1 (a) (i)) | 3 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid caliper |3.6.A.1| | 3 |
| Anti-lock braking system warning lamp sequence is incorrect |3.4.1d| | 3 |
| Offside Rear brake caliper has restricted free movement |3.5.1k| | 3 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 3 |
| Front Service brake excessively fluctuating |1.2.1 |e|| | 3 |
| Nearside Front coil spring cracked |2.4.C.1a| | 3 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 3 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6| | 3 |
| Offside Headlamp aim not tested |4.1.2 |b|| | 3 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 3 |
| Wheel nut|s| missing |4.2.A.1e| | 3 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
| Offside Rear Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 3 |
| Inner Rear brake disc excessively pitted |3.5.1h| | 3 |
| Rear Service brake excessively binding (1.2.1 (f)) | 3 |
| Offside Rear Body has a projection caused by corrosion |6.1.C.1| | 3 |
| Nearside Front Upper coil spring broken |2.4.C.1a| | 3 |
| Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 3 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Power steering fluid reservoir empty |2.1.5 |b| |ii|| | 3 |
| Offside Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 3 |
| Nearside Front Hydraulic brake calliper leaking |1.1.16 |b| |i|| | 3 |
| Offside Front Obligatory mirror missing |8.1.1| | 3 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail |5.3.6 |a| |i|| | 3 |
| Offside Rear Brake lining|s| less than 1.5 mm thick |3.5.1g| | 3 |
| Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 3 |
| Front Headlamp not working on dipped beam |1.7.5a| | 3 |
| Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 3 |
| Centre Upper Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 3 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 3 |
| Offside Seat belt locking mechanism does not secure or release |5.2.5a| | 3 |
| Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 3 |
| Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 3 |
| Centre Upper Stop lamp not working |1.2.1b| | 3 |
| Central Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 3 |
| Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 3 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 3 |
| Nearside Front Headlamp aim not tested |1.8.A.1c| | 3 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Front Brake hose twisted |3.6.B.4c| | 3 |
| Front position lamp|s| not working BOTH |1.1.A.3b| | 3 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mount |2.4.A.3| | 3 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 3 |
| Nearside Side repeater missing (4.4.1 (a) (ii)) | 3 |
| Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 3 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill |6.2.2 |d| |i|| | 3 |
| Rear Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 3 |
| Nearside Side repeater not working (4.4.1 (a) (ii)) | 3 |
| Offside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 3 |
| Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 3 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 3 |
| Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 3 |
| Offside Rear Hydraulic brake calliper leaking and braking performance affected (1.1.16 (b) (ii)) | 3 |
| Nearside Front front brake juddering severely |3.7.A.2b| | 3 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 3 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill (7.1.1 (a) (i)) | 3 |
| Offside Front Floor excessively deteriorated (6.2.4 (a) (i)) | 3 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i)) | 3 |
| Nearside Front Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) | 3 |
| Offside Front Lower Shock absorber has an excessively worn bush |2.7.4| | 3 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 3 |
| Rear fog lamp missing |1.3.2a| | 3 |
| Offside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
| Nearside Rear rear brakes release unevenly |3.7.B.4| | 3 |
| Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3) | 3 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 3 |
| Front Position lamp not working both (4.2.1 (a) (ii)) | 3 |
| Nearside front brake recording little or no effort |3.7.B.5a| | 3 |
| Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 3 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 3 |
| Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 3 |
| Offside Rear Brake pipe leaking on an air braking system |1.1.11 |b| |i|| | 3 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 3 |
| Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 3 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 3 |
| Headlamp aim beam image obviously incorrect |1.8.A.1b| | 3 |
| Nearside Front Position lamp light intensity significantly reduced |4.2.3 |a| |ii|| | 3 |
| Nearside Front Valve stem seriously damaged |5.2.3 |j|| | 3 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 3 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 3 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 3 |
| Offside Rear Rear fog lamp emits a light other than red |1.3.2e| | 3 |
| Offside Front Headlamp aim not tested (4.1.2 (b)) | 3 |
| Nearside Rear coil spring cracked |2.4.C.1a| | 3 |
| Offside Rear Rear fog lamp missing (4.5.1 (a) (ii)) | 3 |
| Offside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 3 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 3 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i)) | 3 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i)) | 3 |
| Centre Brake pipe leaking |3.6.A.1| | 3 |
| Offside Front Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 3 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
| Offside Rear Parking |secondary brake| on a single line braking system has inadequate effort at a wheel |1.3.1 |a| |i|| | 3 |
| Offside Front All position lamps not working |4.2.1 |a|| | 3 |
| Central Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 3 |
| Central Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 3 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 3 |
| Nearside Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 3 |
| Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b|| | 3 |
| Nearside Front Anti-roll bar linkage damaged and seriously weakened |2.4.G.1| | 3 |
| Nearside Rear Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) | 3 |
| Nearside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
| Offside Rear Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii)) | 3 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mounting |2.4.A.3| | 3 |
| Nearside Inner Rear Road wheel bead rim badly distorted |4.2.A.1a| | 3 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 3 |
| Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 3 |
| Rear rear brakes release unevenly |3.7.B.4| | 3 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii)) | 3 |
| Nearside Front Road wheel fixing missing (5.2.1 (a) (i)) | 3 |
| Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 3 |
| Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 3 |
| Nearside Rear Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 3 |
| Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i)) | 3 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail |5.3.6 |a| |i|| | 3 |
| Nearside Front Hydraulic brake calliper leaking (1.1.16 (b) (i)) | 3 |
| Hazard warning lamps inoperative |1.4.B.1b| | 3 |
| Nearside Front Headlamp aim not tested (4.1.2 (b)) | 3 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 3 |
| Offside Front Brake hose excessively twisted (1.1.12 (b) (ii)) | 3 |
| Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 3 |
| Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i)) | 3 |
| Engine MIL inoperative or indicates a malfunction |8.2.2.2 |g|| | 3 |
| Nearside Rear Exhaust system not adequately supported |7.1.1| | 3 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 3 |
| Offside Rear Direction indicators not working |1.4.A.2c| | 3 |
| Nearside Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 3 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 3 |
| Service brake: efficiency below requirements |3.7.C.1a| | 3 |
| Offside Rear fog lamp does not emit a steady red light |4.5.4 |a|| | 3 |
| Nearside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 3 |
| Offside Rear wheel bearing rough when rotated |2.6.1| | 3 |
| Nearside Headlamp aim not tested |4.1.2 |b|| | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 3 |
| Rear Exhaust emissions likely to be affected by an exhaust leak |8.2.1.1 |b|| | 3 |
| Offside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 3 |
| brake disc in such a condition that it is seriously weakened |3.5.1i| | 3 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i|| | 3 |
| Offside Outer Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Outer Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| rear brake excessively fluctuating |3.7.B.3| | 3 |
| Rear Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 3 |
| Headlamp levelling device inoperative (4.1.5 (a)) | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 3 |
| Nearside Rear wheel bearing has excessive play |2.6.2| | 3 |
| Nearside Front Anti-roll bar insecure |2.4.G.1| | 3 |
| Upper Stop lamp not working |1.2.1b| | 3 |
| Brake reservoir fluid level decreases after several pedal applications |3.3.C.1| | 3 |
| Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
| Offside Rear Position lamp not working |4.2.1 |a|| | 3 |
| Nearside Rear Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis leg |2.4.A.3| | 3 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 3 |
| Offside Braking system leaking |3.6.A.1| | 3 |
| Rear coil spring broken |2.4.C.1a| | 3 |
| Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 3 |
| Nearside Rear Upper Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 3 |
| Offside Outer Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Front Front position lamp|s| not working both |1.1.A.3b| | 3 |
| Nearside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 3 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| rear brake juddering severely |3.7.A.5b| | 3 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 3 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill |7.1.1 |a| |i|| | 3 |
| Nearside Rear Direction indicator incorrect colour |1.4.A.2f| | 3 |
| Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 3 |
| Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) | 3 |
| Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
| Nearside Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 3 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassi |2.4.A.3| | 3 |
| Front Body has a sharp edge caused by damage |6.1.C.1| | 3 |
| Nearside Front Headlamp has a product on the lens so that the light output is severely reduced |4.1.4 |b|| | 3 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 3 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 3 |
| Centre Front Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 3 |
| Centre Front Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 3 |
| Driver`s airbag missing |7.1.5 |a|| | 3 |
| Nearside Front Anti-roll bar linkage insecure and impairing directional stability |5.3.3 |a| |ii|| | 3 |
| Brake pipe leaking front to rear |3.6.A.1| | 3 |
| Headlamp aim not tested (4.1.2 (b)) | 3 |
| Offside Obligatory mirror missing |8.1.1| | 3 |
| Central Exhaust emissions likely to be affected by an exhaust leak |8.2.1.1 |b|| | 3 |
| Offside Front Direction indicators not working |1.4.A.2c| | 3 |
| Nearside Front Anti-roll bar ball joint likely to become detached |5.3.4 |a| |ii|| | 3 |
| Offside Front Lower Suspension component ball joint excessively worn |5.3.4 |a| |i|| | 3 |
| Offside Parking |secondary brake| on a single line braking system has inadequate effort at a wheel |1.3.1 |a| |i|| | 3 |
| Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 3 |
| Nearside Headlamp insecure |4.1.1 |c|| | 3 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill |7.1.1 |a| |i|| | 3 |
| Nearside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Rear Hydraulic brake calliper leaking and braking performance affected |1.1.16 |b| |ii|| | 3 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded OUTER SILL |2.4.A.3| | 3 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 3 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 3 |
| Nearside Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 3 |
| Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 3 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 3 |
| rear brake recording little or no effort |3.7.B.5a| | 3 |
| Windscreen has a combination of minor damage areas which restrict the drivers view |8.3.1c| | 3 |
| Offside Front Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 3 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |8.1.1 |a|| | 3 |
| Offside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 3 |
| Brake pedal has insufficient reserve travel (1.1.2 (a)) | 3 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
| Rear fog lamp emits a light other than red |1.3.2e| | 2 |
| Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 2 |
| Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 2 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 2 |
| Emissions not tested |7.0| | 2 |
| Offside Rear fog lamp emits a light other than red |1.3.2e| | 2 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 2 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 2 |
| Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 2 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 2 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
| Nearside Front Service brake excessively binding (1.2.1 (f)) | 2 |
| Exhaust carbon monoxide content at idle exceeds manufacturers specified limits (8.2.1.2 (b)) | 2 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 2 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
| Offside Rear coil spring broken (2.4.C.1a) | 2 |
| Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i)) | 2 |
| Offside Front Service brake indicates brake bind |3.7.D.2a| | 2 |
| Nearside Rear Service brake indicates brake bind |3.7.D.2a| | 2 |
| Rear Rear fog lamp tell tale not working |1.3.1b| | 2 |
| Battery insecure and likely to cause a short circuit |4.13 |a| |ii|| | 2 |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 2 |
| Nearside Front Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Offside Rear Road wheel badly damaged |4.2.A.1a| | 2 |
| Rear Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 2 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 2 |
| Nearside Rear Anti-roll bar locating pin insecure |2.4.G.3a| | 2 |
| Brake hydraulic reservoir fluid level significantly below minimum level |1.1.10 |d| |ii|| | 2 |
| Rear fog lamp switch inoperative (4.5.3 (a)) | 2 |
| Offside Rear fog lamp missing (4.5.1 (a) (ii)) | 2 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
| Nearside Inner Rear brake disc excessively pitted |3.5.1h| | 2 |
| Nearside Front Lower Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 2 |
| Nearside Rear Anti-roll bar fractured |2.4.G.1| | 2 |
| front brake binding both |3.7.B.1| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill close to subframe mount |6.1.B.2| | 2 |
| rear brake recording little or no effort both |3.7.B.5a| | 2 |
| Nearside Rear brake disc has restricted free movement |3.5.1j| | 2 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
| Hazard warning switch inoperative |4.4.2 |a| |ii|| | 2 |
| Nearside Rear Direction indicators incorrect colour |1.4.A.2f| | 2 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 2 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 2 |
| Nearside Front Lower Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 2 |
| Nearside Front Position lamp not working side light (4.2.1 (a) (ii)) | 2 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg (6.1.1 (c) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor pan (5.3.6 (a) (i)) | 2 |
| Headlamp not working on main beam |1.7.5a| | 2 |
| Offside Front Steering locking device missing |2.2.C.1g| | 2 |
| Front Exhaust emissions likely to be affected by an exhaust leak |8.2.1.1 |b|| | 2 |
| Offside Rear Coil spring corroded so that its cross sectional area is reduced and seriously weakened (5.3.1 (b) (i)) | 2 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 2 |
| Nearside Position lamp not working |4.2.1 |a|| | 2 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg |6.1.A.1| | 2 |
| Rear Sub-frame corroded and seriously weakened |5.3.3 |b| |i|| | 2 |
| Offside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 2 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i)) | 2 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i)) | 2 |
| Nearside Front Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 2 |
| Offside Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 2 |
| Hydraulic fluid leaking excessively |8.4.1 |a| |i|| | 2 |
| Speedometer clearly inoperative |6.7.2| | 2 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 2 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 2 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 2 |
| Nearside Front Upper Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 2 |
| Offside Front Upper Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg |5.3.6 |a| |i|| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting area (5.3.6 (a) (i)) | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Centre Rear Exhaust system not adequately supported |7.1.1| | 2 |
| Nearside Front Brake pipe inadequately clipped |3.6.B.1| | 2 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Nearside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 2 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Chassis rail |2.4.A.3| | 2 |
| Exhaust emits excessive dense blue smoke during acceleration |8.2.1.2 |g|| | 2 |
| Offside Front position lamp|s| obscured more than 50% |1.1.A.3c| | 2 |
| Nearside Front Upper Front suspension locking device missing |2.5.A.4| | 2 |
| Offside Front Headlamp aim not tested |1.8.A.1c| | 2 |
| Offside front parking brake recording little or no effort |3.7.B.6a| | 2 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 2 |
| Offside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Rear brake disc contaminated by brake fluid |3.5.1h| | 2 |
| Offside Front Position lamp light intensity significantly reduced |4.2.3 |a| |ii|| | 2 |
| Nearside Direction indicator not working |1.4.A.2c| | 2 |
| Exhaust has a major leak of exhaust gases snapped |7.1.2| | 2 |
| Power steering malfunctioning |2.1.5 |a|| | 2 |
| Power steering inoperative and steering adversely affected (2.1.5 (c) (ii)) | 2 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill holed |5.2.6| | 2 |
| Nearside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 2 |
| Offside Front Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Rear Subframe mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 2 |
| Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
| Steering wheel likely to become detached (2.2.1 (b) (ii)) | 2 |
| Steering system excessively tight |2.2.D.1| | 2 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded main chassis |2.4.A.3| | 2 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 2 |
| Nearside Front Brake lining|s| less than 1.5 mm thick |3.5.1g| | 2 |
| Nearside Rear Brake lining|s| less than 1.5 mm thick |3.5.1g| | 2 |
| Offside Rear Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
| Offside Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 2 |
| Power steering component leaking steering rack (2.1.5 (a)) | 2 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid brake caliper |1.1.16 |b| |i|| | 2 |
| Nearside Front Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b)) | 2 |
| Drivers seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i)) | 2 |
| Offside Parking brake efficiency below requirements |1.4.2 |a| |i|| | 2 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Nearside Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 2 |
| Offside Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 2 |
| Offside Front Anti-roll bar corroded and seriously weakened |2.4.G.1| | 2 |
| Nearside Front Anti-roll bar corroded and seriously weakened |2.4.G.1| | 2 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 2 |
| Main beam tell-tale not working |4.9.1 |a| |ii|| | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 2 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |6.1.1 |c| |i|| | 2 |
| Nearside Front Anti-roll bar linkage cracked |2.4.G.1| | 2 |
| Offside Front Anti-roll bar linkage cracked |2.4.G.1| | 2 |
| Offside Side repeater insecure |1.4.A.2b| | 2 |
| Offside Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 2 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Rear Coil spring not correctly located |2.4.C.2| | 2 |
| Nearside Power steering component|s| leaking |2.3.3b| | 2 |
| Offside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 2 |
| Hazard warning switch insecure |1.4.B.1d| | 2 |
| Nearside Front Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 2 |
| Offside Front Headlamp not working on dipped beam (1.7.5a) | 2 |
| Power steering pipe/hose excessively corroded (2.1.5 (g) (i)) | 2 |
| Speedometer clearly inoperative (7.8 (b) (ii)) | 2 |
| Offside Front Brake hose bulging under pressure (1.1.12 (d)) | 2 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill area |7.1.1 |a| |i|| | 2 |
| Front Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 2 |
| Offside Rear Upper Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g)) | 2 |
| Rear Service brake imbalanced across an axle (1.2.1 (b) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg (5.3.6 (a) (i)) | 2 |
| Front Service brake excessively binding (1.2.1 (f)) | 2 |
| Offside Rear Service brake lagging in operation (1.2.1 (d)) | 2 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i)) | 2 |
| Nearside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii)) | 2 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill |6.2.2 |d| |i|| | 2 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6| | 2 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6| | 2 |
| Offside Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 2 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 2 |
| Nearside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired sill |7.1.1 |a| |i|| | 2 |
| Offside Rear Radius arm corroded and seriously weakened |2.4.G.1| | 2 |
| Nearside Headlamp aim beam image too far to the right |1.6.B4| | 2 |
| Nearside Front Floor excessively deteriorated (6.2.4 (a) (i)) | 2 |
| Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Nearside Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 2 |
| Nearside Rear Braking system leaking brake calliper |3.6.A.1| | 2 |
| Nearside Front Lower Shock absorber has an excessively worn bush |2.7.4| | 2 |
| Nearside Front Brake hose stretched |found during steering lock to lock check| |2.2.D.2b| | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
| Offside Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 2 |
| Front Headlamp aim not tested (4.1.2 (b)) | 2 |
| Nearside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Nearside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 2 |
| Rear Service brake excessively fluctuating (1.2.1 (e)) | 2 |
| Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4) | 2 |
| Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 2 |
| Offside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 2 |
| Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 2 |
| Offside Rear Direction indicator incorrect colour (4.4.3 (a)) | 2 |
| Rear Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 2 |
| Rear Rear fog lamp missing |1.3.2a| | 2 |
| Rear fog lamp switch missing |1.3.1a| | 2 |
| Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| All position lamps not working |1.1.A.3b| | 2 |
| Offside Front Upper Front suspension locking device missing |2.5.A.4| | 2 |
| Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
| Offside Rear An item not tested |Manual| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6| | 2 |
| Nearside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 2 |
| Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi leg (5.3.6 (a) (i)) | 2 |
| Offside Front Headlamp aim beam image kick up to the offside |1.8| | 2 |
| Nearside Front Coil spring not correctly located |2.4.C.2| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing/chassis |2.4.A.3| | 2 |
| Offside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 2 |
| Offside Front Valve stem seriously damaged |5.2.3 |j|| | 2 |
| Offside Rear Valve stem seriously damaged |5.2.3 |j|| | 2 |
| Brake fluid warning lamp inoperative |3.6.G.2| | 2 |
| Nearside Outer Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Exhaust has a part missing |7.1.1a| | 2 |
| Offside Front Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 2 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Central Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
| Offside Front Upper Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
| Nearside Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) | 2 |
| Nearside Track rod end loose |2.2.B.1d| | 2 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i|| | 2 |
| Centre Rear Upper Stop lamp not working |1.2.1b| | 2 |
| Nearside Front Steering locking device missing |2.2.C.1g| | 2 |
| Service brake: efficiency below requirements |3.7.D.4| | 2 |
| Offside Front Rear fog lamp not working |1.3.2b| | 2 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 2 |
| Nearside Headlamp light intensity severely reduced |4.1.4 |a|| | 2 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area (7.1.1 (a) (i)) | 2 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 2 |
| Rear Exhaust has a major leak of exhaust gases joint |7.1.2| | 2 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 2 |
| Rear fog lamp has less than 50% of the light sources illuminating |1.3.2b| | 2 |
| Nearside Front Direction indicator incorrect colour |4.4.3 |a|| | 2 |
| Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 2 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 2 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 2 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 2 |
| Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Nearside Front Upper Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Rear brake excessively fluctuating | 2 |
| Nearside Front Road wheel badly damaged |4.2.A.1a| | 2 |
| Front All position lamps not working |1.1.A.3b| | 2 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 2 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 2 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Exhaust catalytic converter missing where one was fitted as standard |8.2.1.1 |a|| | 2 |
| Offside Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 2 |
| Offside Front Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 2 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Power steering disconnected where it is standard fitment |2.3.3a| | 2 |
| Offside Rear fog lamp missing |1.3.2a| | 2 |
| Front Braking system leaking |3.6.A.1| | 2 |
| Speedometer cannot be illuminated. |6.7.3| | 2 |
| Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 2 |
| Nearside Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 2 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
| Rear Battery insecure |1.9.1| | 2 |
| Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 2 |
| Nearside Rear Vehicle structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 2 |
| Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Rear Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii)) | 2 |
| Front coil spring fractured |2.4.C.1a| | 2 |
| Offside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 2 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Rear Brake pipe inadequately supported |3.6.B.1| | 2 |
| Offside Front Electrical wiring insecure |1.9.2a| | 2 |
| Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 2 |
| Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 2 |
| Front Inner Suspension component mounting prescribed area is excessively corroded anti roll bar mounting/chassis rail |2.4.A.3| | 2 |
| Nearside Front Steering locking device missing track rod end (2.1.3 (d)) | 2 |
| Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Rear Braking system leaking Brake caliper |3.6.A.1| | 2 |
| Windscreen damaged and affecting the drivers view of the road (3.2 (a) (ii)) | 2 |
| Nearside Rear Road wheel fixing missing (5.2.1 (a) (i)) | 2 |
| Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i)) | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i)) | 2 |
| Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Offside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Front Floor excessively deteriorated |6.2.4 |a| |i|| | 2 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded wheel arch |5.2.6| | 2 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 2 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 2 |
| Offside Rear Service brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 2 |
| Offside Power steering pipe|s| or hose|s| fouling other parts of the vehicle |2.3.2| | 2 |
| Brake hydraulic reservoir cap missing |3.6.G.1a| | 2 |
| Nearside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind wheel (5.3.6 (a) (i)) | 2 |
| Nearside Headlamp insecure (4.1.1 (c)) | 2 |
| Nearside Headlamp not working on dipped beam (1.7.5a) | 2 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 2 |
| Nearside Rear Anti-roll bar linkage fractured |5.3.3 |b| |ii|| | 2 |
| Offside Rear Direction indicator incorrect colour |4.4.3 |a|| | 2 |
| Nearside Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 2 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 2 |
| Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
| Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 2 |
| Front Brake pedal spongy |3.3.B.1b| | 2 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
| Offside Front Lower Shock absorbers has an excessively worn bush (5.3.2 (c)) | 2 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 2 |
| Offside Front Anti-roll bar linkage ball joint likely to become detached |5.3.4 |a| |ii|| | 2 |
| Brake fluid contaminated |1.8 |a|| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 2 |
| Nearside Rear Anti-roll bar linkage missing |2.4.G.1| | 2 |
| Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Offside Front Anti-roll bar linkage severely distorted |2.4.G.1| | 2 |
| Nearside Rear Braking system leaking Caliper |3.6.A.1| | 2 |
| Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b)) | 2 |
| Offside rear brakes release unevenly |3.7.B.4| | 2 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer cill |5.2.6| | 2 |
| Nearside Front Brake pipe excessively chafed |3.6.B.2c| | 2 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits due to exhaust leak |8.2.1.2 |c|| | 2 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded |7.1.1 |a| |i|| | 2 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill |5.2.6| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill (5.3.6 (a) (i)) | 2 |
| Nearside Rear Tie bar/rod ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 2 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing |2.4.A.3| | 2 |
| Front Service brake excessively binding |1.2.1 |f|| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded OUTER SILL |2.4.A.3| | 2 |
| Offside Front Brake hose stretched |found during steering lock to lock check| |2.2.D.2b| | 2 |
| Nearside Front Position lamp not working sidelight (4.2.1 (a) (ii)) | 2 |
| Nearside Brake cable has a seized clevis joint pivot |3.5.1c| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mounting |2.4.A.3| | 2 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 2 |
| Nearside Front Upper Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Front Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
| Nearside front brake grabbing severely |3.7.A.2b| | 2 |
| Offside Front Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 2 |
| Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i)) | 2 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 2 |
| Nearside Rear Brake hose leaking |3.6.A.1| | 2 |
| Nearside Front Brake hose excessively twisted (1.1.12 (b) (ii)) | 2 |
| Exhaust has a major leak of exhaust gases back box |7.1.2| | 2 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 2 |
| Offside Rear Braking system leaking Caliper |3.6.A.1| | 2 |
| Offside Rear Suspension arm corroded and seriously weakened lower arm |2.4.G.1| | 2 |
| Nearside Rear coil spring corroded so that its cross sectional area is reduced and seriously weakened |2.4.C.1b| | 2 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 2 |
| Offside Front Drivers airbag missing (7.1.5 (a)) | 2 |
| Offside Front coil spring cracked |2.4.C.1a| | 2 |
| Offside Front Upper Suspension arm locating pin locking device missing |2.4.G.3b| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i)) | 2 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Floor (7.1.1 (a) (i)) | 2 |
| Offside Rear Shock absorber has an excessively worn bush |2.7.4| | 2 |
| Offside Front Lower Steering linkage ball joint has excessive play (2.1.3 (b) (i)) | 2 |
| Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Rear Front position lamp|s| not working |1.1.A.3b| | 2 |
| Service brake efficiency less than 50% of the required value |1.2.2 |a| |ii|| | 2 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 2 |
| Offside Front Anti-roll bar linkage ball joint likely to become detached detached (5.3.4 (a) (ii)) | 2 |
| Nearside Rear Brake disc contaminated (1.1.14 (b)) | 2 |
| Offside Rear Brake disc contaminated (1.1.14 (b)) | 2 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i)) | 2 |
| Rear fog lamp switch missing (4.5.3 (a)) | 2 |
| Offside Front Lower Ball joint has excessive play |2.2.B.1f| | 2 |
| Offside Front Anti-roll bar fractured |2.4.G.1| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 2 |
| Offside Side repeater missing |1.4.A.2b| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS (5.3.6 (a) (i)) | 2 |
| Parking brake lever ratchet mechanism is broken |3.1.5| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded outrigger |2.4.A.3| | 2 |
| Offside Front Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 2 |
| Hazard warning switch inoperative (4.4.2 (a) (ii)) | 2 |
| Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Fuel cap/sealing device missing (6.1.3 (b) (i)) | 2 |
| Emissions not tested (8.2.2.2 (e)) | 2 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
| Offside All position lamps not working |1.1.A.3b| | 2 |
| Nearside Front Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 2 |
| Nearside Front Seat belt retracting mechanism defective |5.2.5b| | 2 |
| Offside Rear Anti-roll bar linkage likely to become detached |5.3.3 |a| |ii|| | 2 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 2 |
| Nearside Front Power steering component leaking (2.1.5 (a)) | 2 |
| Front Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 2 |
| Offside Rear Upper coil spring broken |2.4.C.1a| | 2 |
| Rear Brake pipe connection leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 2 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 2 |
| Offside Rear Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 2 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 2 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 2 |
| Offside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Nearside Front Outer Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Offside Front Outer Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Offside Rear Fuel pipe leaking |7.2.3| | 2 |
| Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 2 |
| Centre Power steering pipe|s| or hose|s| leaking |2.3.3b| | 2 |
| Front Undertray likely to become detached (6.2.1 (a) (ii)) | 2 |
| Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 2 |
| Offside Front Lower Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Nearside Front Headlamp insecure |4.1.1 |c|| | 2 |
| Nearside Front Brake hose excessively damaged |3.6.B.4d| | 2 |
| Power steering fluid reservoir empty (2.1.5 (b) (ii)) | 2 |
| Rear Rear position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Front Front position lamp(s) not working (1.1.A.3b) | 2 |
| Offside Rear Anti-roll bar linkage damaged and seriously weakened |2.4.G.1| | 2 |
| Offside Rear Anti-roll bar locating pin insecure |2.4.G.3a| | 2 |
| Nearside Rear Macpherson strut corroded and seriously weakened |2.4.G.1| | 2 |
| Offside Front Tie bar/rod fractured |2.4.G.1| | 2 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 2 |
| Nearside Front Suspension component mounting prescribed area is fractured |2.4.A.3| | 2 |
| Brake pedal has insufficient reserve travel |1.1.2 |a|| | 2 |
| Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Nearside Front Lower Suspension arm corroded and seriously weakened shock absorber mount |2.4.G.1| | 2 |
| Offside Front Lower Suspension arm corroded and seriously weakened shock absorber mount |2.4.G.1| | 2 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear outer sill |7.1.1 |a| |i|| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outter sill |5.2.6| | 2 |
| Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 2 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 2 |
| Rear Brake disc significantly and obviously worn both (1.1.14 (a) (i)) | 2 |
| Front Service brake imbalanced across an axle |1.2.1 |b| |i|| | 2 |
| Rear Service brake imbalanced across an axle |1.2.1 |b| |i|| | 2 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS (5.3.6 (a) (i)) | 2 |
| Exhaust emissions likely to be affected by an exhaust leak |8.2.2.1 |b|| | 2 |
| Driver`s airbag obviously defective |5.4.1| | 2 |
| Nearside Front Anti-roll bar fractured |2.4.G.1| | 2 |
| Parking brake lever ratchet not holding correctly |1.1.6 |a|| | 2 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis |5.3.6 |a| |ii|| | 2 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis |5.3.6 |a| |ii|| | 2 |
| Nearside Front Anti-roll bar attachment bracket/mounting insecure |5.3.3 |a| |i|| | 2 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 2 |
| Central Rear Anti-roll bar missing (5.3.3 (a) (ii)) | 2 |
| Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 2 |
| Power steering inoperative |2.1.5 |c| |i|| | 2 |
| Nearside Front Lower Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a| | 2 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Rear fog lamp switch inoperative |4.5.3 |a| |ii|| | 2 |
| Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 2 |
| Offside Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 2 |
| Offside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Rear Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 2 |
| Nearside Front Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 2 |
| Front Service brake excessively fluctuating (1.2.1 (e)) | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 2 |
| Nearside Outer Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Stop lamp|s| all not working |4.3.1 |a| |iii|| | 2 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 2 |
| Nearside Front Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1| | 2 |
| Offside Front Anti-roll bar linkage damaged and seriously weakened |5.3.3 |b| |i|| | 2 |
| Central Rear Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 2 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 2 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Offside Rear Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 2 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL |7.1.1 |a| |i|| | 2 |
| Nearside Front Anti-roll bar locating pin insecure |2.4.G.3a| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 2 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 2 |
| Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 2 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 2 |
| Offside Front front brake grabbing severely |3.7.A.2b| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 2 |
| Nearside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i)) | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 2 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i)) | 2 |
| Nearside Front Power steering pipe/hose leaking |2.1.5 |a|| | 2 |
| Front Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 2 |
| Nearside Front Headlamp incorrect colour |1.7.5b| | 2 |
| Offside Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 2 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Brake pipe leaking on a hydraulic braking system front to rear |1.1.11 |b| |ii|| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill chalked (7.1.1 (a) (i)) | 2 |
| Hazard warning switch faulty |1.4.B.1d| | 2 |
| Offside Rear Body component corroded and likely to cause injury wheel arch (6.2.1 (a) (i)) | 2 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 2 |
| Nearside Rear Valve stem seriously damaged |5.2.3 |j|| | 2 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 2 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wing |5.3.6 |a| |ii|| | 2 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i|| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i|| | 2 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 2 |
| Offside Front Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 2 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 2 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 2 |
| Offside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b)) | 2 |
| Brake pedal anti-slip provision missing (1.1.2 (c)) | 2 |
| Nearside Front position lamp|s| has a product on the light source so it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 2 |
| Offside Rear Shock absorber has negligible damping effect |2.7.5| | 2 |
| Nearside Rear Braking system leaking brake caliper |3.6.A.1| | 2 |
| Rear Electrical wiring insecure |1.9.2a| | 2 |
| Nearside Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 2 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 2 |
| Nearside Headlamp adversely affected by the operation of another lamp |1.7.5c| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 2 |
| Nearside Headlamp has a product on the lens so that the light output is severely reduced |4.1.4 |b|| | 2 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 2 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 2 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded wheel arch holed |5.2.6| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded rear outer sill |5.2.6| | 2 |
| Offside Rear Stop lamp|s| showing white light to the rear |4.3.3 |a| |ii|| | 2 |
| Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 2 |
| Nearside Rear Anti-roll bar has excessive play in a ball joint drop link |2.4.G.2| | 2 |
| Nearside Front Brake hose excessively stretched (1.1.12 (b) (ii)) | 2 |
| Offside Front Brake hose excessively stretched (1.1.12 (b) (ii)) | 2 |
| Nearside Front Road wheel distorted |4.2.A.1a| | 2 |
| Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c)) | 2 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing |2.4.A.3| | 2 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| front brake binding both sides |3.7.B.1| | 2 |
| Driver`s airbag obviously inoperative |7.1.5 |c|| | 2 |
| Exhaust emits excessive dense blue smoke during acceleration |7.3.A.2c| | 2 |
| front brake binding both front |3.7.B.1| | 2 |
| Nearside Side repeater missing |1.4.A.2b| | 2 |
| Offside Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 2 |
| Inner Stop lamp not working |1.2.1b| | 2 |
| Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill area (5.3.6 (a) (i)) | 2 |
| Front Power steering pipe|s| or hose|s| inappropriately repaired |2.3.7| | 2 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 2 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 2 |
| Nearside Front Body has a sharp edge caused by damage |6.1.C.1| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 2 |
| Nearside Front Brake hose twisted |3.6.B.4c| | 2 |
| Offside Front Anti-roll bar ball joint likely to become detached |5.3.4 |a| |ii|| | 2 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill panel (7.1.1 (a) (i)) | 2 |
| Nearside Rear Position lamp not working |4.2.1 |a|| | 2 |
| Offside Headlamp insecure (4.1.1 (c)) | 2 |
| Offside Brake cable has restricted free movement |3.5.1k| | 2 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 2 |
| Suspension component mounting prescribed area is excessively corroded both outer sills |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Outer sill |2.4.A.3| | 2 |
| Offside Front Brake hose excessively damaged |1.1.12 |b| |ii|| | 2 |
| Nearside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Parking brake recording little or no effort |3.7.D.3a| | 2 |
| Parking brake inoperative on one side (1.4.1 (a)) | 2 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 2 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded OUTER SILL |5.2.6| | 2 |
| Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 2 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 2 |
| Offside Rear Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 2 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Offside Rear Anti-roll bar fractured |2.4.G.1| | 2 |
| Front Supplementary restraint system warning lamp indicates a fault (7.1.6 (a)) | 2 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b) | 2 |
| Nearside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 2 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 2 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg (5.3.6 (a) (i)) | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Chassis leg to anti roll bar |2.4.A.3| | 2 |
| Nearside Front Anti-roll bar synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength underside of sill (5.3.6 (a) (i)) | 2 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength underside of sill (5.3.6 (a) (i)) | 2 |
| Nearside Front Tie bar/rod attachment bracket/mounting insecure |2.4.G.1| | 2 |
| Parking brake inoperative on one side offside not working (1.4.1 (a)) | 2 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive co 0.61 |7.3.D.3| | 2 |
| Offside Rear fog lamp not working |1.3.2b| | 1 |
| Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Front brake disc in such a condition that it is seriously weakened | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| brake disc excessively pitted |3.5.1h| | 1 |
| rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mount prescribed area |5.3.6 |a| |i|| | 1 |
| Offside Front Position lamp not working |4.2.1 |a|| | 1 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid caliper |3.6.A.1| | 1 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Offside Rear fog lamp missing |1.3.2a| | 1 |
| Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Rear fog lamp switch missing |1.3.1a| | 1 |
| Nearside Front Position lamp not working |4.2.1 |a|| | 1 |
| Battery insecure and likely to cause a short circuit |4.13 |a| |ii|| | 1 |
| Emissions not tested |8.2.1.2 |d|| | 1 |
| Offside Front Position lamp likely to become detached |4.2.1 |c| |ii|| | 1 |
| Offside Front Seat belt likely to become detached in the event of a collision |7.1.1 |a| |ii|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 1 |
| Offside Front Coil spring fractured or broken |5.3.1 |b| |i|| | 1 |
| Offside Rear Coil spring fractured or broken |5.3.1 |b| |i|| | 1 |
| Nearside Front Lower Suspension arm ball joint likely to become detached lock pin missing |5.3.4 |a| |ii|| | 1 |
| Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Front Bumper likely to become detached |6.1.4 |a| |ii|| | 1 |
| Brake performance not tested all binding |1.2.1 |g|| | 1 |
| Offside Front Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 1 |
| Rear brake binding | 1 |
| Nearside Steering locking device missing |2.2.C.1g| | 1 |
| Offside Steering locking device missing |2.2.C.1g| | 1 |
| Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Rear fog lamp switch faulty |1.3.1a| | 1 |
| Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Rear brake disc excessively pitted |3.5.1h| | 1 |
| Offside Rear brake disc excessively pitted |3.5.1h| | 1 |
| Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 1 |
| Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 1 |
| Nearside Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 1 |
| Power steering inoperative |2.3.3a| | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Upper Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Upper Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
| Nearside Rear Stop lamp not working |1.2.1b| | 1 |
| Horn not working |1.6.2a| | 1 |
| Offside Rear Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Side repeater not working |4.4.1 |a| |ii|| | 1 |
| Offside Parking brake inoperative on one side |1.4.1 |a|| | 1 |
| Central Rear fog lamp not working |1.3.2b| | 1 |
| Nearside Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 1 |
| Offside Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 1 |
| Rear fog lamp tell tale missing |1.3.1b| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear coil spring fractured |2.4.C.1a| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
| Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits |8.2.1.2 |b|| | 1 |
| Exhaust carbon monoxide content at idle exceeds default limits |8.2.1.2 |b|| | 1 |
| Offside Front front brake binding |3.7.B.1| | 1 |
| Offside Rear front parking brake recording little or no effort |3.7.B.6a| | 1 |
| Nearside Front Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Rear coil spring broken |2.4.C.1a| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Rear Emissions not tested (8.2.2.2 (e)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Position lamp not working all front and rear (4.2.1 (a) (ii)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Exhaust catalytic converter missing where one was fitted as standard Stainless steel system fitted (8.2.1.1 (a)) | 1 |
| Nearside Rear Body panel corroded and likely to cause injury Wing holed (6.2.1 (a) (i)) | 1 |
| Rear Position lamp adversely affected by the operation of another lamp Nearside and offside (4.2.3 (c)) | 1 |
| Rear Position lamp light intensity significantly reduced Nearside and offside have been painted over (4.2.3 (a) (ii)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Offside Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Front Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
| Offside Front Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a)) | 1 |
| Nearside Front Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Front Exhaust has a major leak of exhaust gases Flexi pipe (6.1.2 (a)) | 1 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Stop lamp(s) light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
| Offside Stop lamp(s) light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
| Central Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Emissions not tested (8.2.1.2 (d)) | 1 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 1 |
| Central Rear fog lamp does not face the rear (4.5.4 (a)) | 1 |
| Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Nearside Rear Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Offside Rear Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Exhaust emissions exceed manufacturers specified limit (8.2.2.2 (a)) | 1 |
| Rear brake disc in such a condition that it is seriously weakened | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Offside Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Nearside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Rear fog lamp switch inoperative (4.5.3 (a)) | 1 |
| Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen both (3.5 (a)) | 1 |
| Nearside Rear Hydraulic brake calliper leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
| Brake performance not tested (1.2.1 (g)) | 1 |
| Emissions not tested car miss firing (8.2.1.2 (d)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced N/S sill. (7.1.1 (a) (i)) | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
| Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
| Offside Rear Upper Suspension arm pin or bush excessively worn outer bush (5.3.4 (a) (i)) | 1 |
| Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 1 |
| Offside Front Hydraulic brake calliper leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Shock absorber has a serious fluid leak (2.7.3) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6) | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6) | 1 |
| Nearside Rear coil spring fractured (2.4.C.1a) | 1 |
| Offside Front Front position lamp(s) not working (1.1.A.3b) | 1 |
| Nearside Front Front position lamp(s) not working (1.1.A.3b) | 1 |
| Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a) | 1 |
| Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
| Offside Front Macpherson strut insecurely attached Mounting bolt broken on upper attachment (5.3.3 (a) (i)) | 1 |
| Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Offside Rear Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 1 |
| Steering rack has excessive free play detected at the steering wheel (steering rack fitted) (2.3 (a) (i)) | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Front Shock absorbers has a serious fluid leak | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3) | 1 |
| Offside Rear Rear position lamp(s) adversely affected by the operation of another lamp fog light coming on (1.1.A.3f) | 1 |
| Emissions not tested (7.3.A.1) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6) | 1 |
| Offside Rear Rear fog lamp emits a light other than red (1.3.2e) | 1 |
| Nearside Stop lamp not working (1.2.1b) | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 1 |
| Offside Indicator tell tale inoperative |1.4.A.2a| | 1 |
| Supplementary restraint system warning lamp indicates a fault air bag warning light on (7.1.6 (a)) | 1 |
| Exhaust emits dense blue smoke at idle |7.3.A.2b| | 1 |
| Exhaust has a major leak of exhaust gases centre pipe to rear box flanges deteriorated (6.1.2 (a)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill inner arch |2.4.A.3| | 1 |
| Macpherson strut insecure and impairing directional stability Top nut missing (5.3.3 (a) (ii)) | 1 |
| Power steering pipe/hose leaking Pipe or rack (2.1.5 (a)) | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Wheel arch (7.1.1 (a) (i)) | 1 |
| Nearside Rear Brake pipe leaking from flexi to junction block |3.6.A.1| | 1 |
| Brake performance not tested due to brake fluid leak |3.7.A.1| | 1 |
| Offside Front Lower Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Headlamp aim so that beam "kick up" is not visible on the screen requires bulb |4.1.2 |a|| | 1 |
| Nearside Headlamp aim beam image obviously incorrect headlight round the wrong way |1.8.A.1b| | 1 |
| Offside Parking brake recording little or no effort |3.7.D.3a| | 1 |
| Centre Rear fog lamp insecure |1.3.2a| | 1 |
| Emissions not tested due to water pump failure (8.2.1.2 (d)) | 1 |
| Offside Rear Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Upper Suspension arm insecure |2.4.G.1| | 1 |
| Nearside Rear Road wheel fixing loose (5.2.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1| | 1 |
| Offside Rear position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 1 |
| Offside Upper Front suspension locking device missing |2.5.A.4| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced backing sill (7.1.1 (a) (i)) | 1 |
| Offside Front Steering rack gaiter insecure |2.2.D.2d| | 1 |
| Nearside Front Tie bar/rod ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Upper Front suspension has a suspension upper ball joint securing nut not locked |2.5.B.1a| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded undersill |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis in front of lower arm |2.4.A.3| | 1 |
| Offside Rear Torque/reaction arm damaged and seriously weakened |2.4.G.1| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Hole in chassis (6.1.1 (c) (i)) | 1 |
| Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
| Nearside Seat belt affected by an insecure seat fixing |5.2.1b| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outrigger (6.1.1 (c) (i)) | 1 |
| Offside Rear Lower Suspension component corroded and seriously weakened sill |5.3.3 |b| |i|| | 1 |
| Emissions not tested due to exhaust blow |7.3.A.1| | 1 |
| Rear Exhaust has a major leak of exhaust gases at centre to rear join |7.1.2| | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti-roll bar mounting, both sides |5.3.6 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both sides inner body sills heavily corroded |7.1.1 |a| |i|| | 1 |
| Rear Exhaust silencer likely to become detached exhaust joint area heavily deteriorated |8.1.1 |b| |ii|| | 1 |
| Offside Rear Brake pipe leaking on a hydraulic braking system across axle (1.1.11 (b) (ii)) | 1 |
| Offside Rear Sub-frame attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Braking system leaking brake pipe across rear axle |3.6.A.1| | 1 |
| Offside Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Nearside Rear Brake prescribed area is excessively corroded |1.1.21 |e| |i|| | 1 |
| Offside Rear Brake prescribed area is excessively corroded |1.1.21 |e| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor pan by chassis support |6.1.B.2| | 1 |
| Offside Rear front parking brake recording little or no effort |3.7.B.6a| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill |7.1.1 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases centre to rear join |6.1.2 |a|| | 1 |
| Front Service brake juddering severely |3.7.C.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill to floor pan front to centre |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill to floor pan front to centre |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point |6.1.B.2| | 1 |
| Offside Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` sat nav holder | removed| |8.3.1e| | 1 |
| Offside Rear Seat belt anchorage likely to become detached in the event of a collision o/s outer sill panel holed and corroded (7.1.1 (a) (ii)) | 1 |
| Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Rear Brake valve leaking such that brake functionality is affected CALIPER (1.1.7 (d) (ii)) | 1 |
| Emissions not tested exhaust leaking (8.2.1.2 (d)) | 1 |
| Anti-roll bar ball joint excessively worn both fronts (5.3.4 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both rear outer sills corroded excessive |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced body sill corroded |7.1.1 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced body sill corroded |7.1.1 |a| |i|| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits co high |8.2.1.2 |b|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced corroded on inner arch (7.1.1 (a) (i)) | 1 |
| Nearside Front Service brake juddering severely |3.7.C.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis member at drivers seat mounts |6.1.B.2| | 1 |
| Seat belt anchorage prescribed area is excessively corroded both rear sills |5.2.6| | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis |5.3.3 |b| |i|| | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis |5.3.3 |b| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill panel excessively corroded (7.1.1 (a) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rail marked in yellow advise remove trim for further inspection |6.1.B.2| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill back/floor (6.2.2 (d) (i)) | 1 |
| Nearside Front Anti-roll bar pin or bush excessively worn D bush worn |5.3.4 |a| |i|| | 1 |
| Offside Front Brake pipe excessively damaged |3.6.B.2c| | 1 |
| Nearside Front Steering rack gaiter insecure |2.2.D.2d| | 1 |
| Driver`s view of an obligatory external mirror materially affected by an obstruction |3.1 |a| |ii|| | 1 |
| Nearside Front Braking system leaking to rear pipe |3.6.A.1| | 1 |
| Brake pipe leaking underside pipes heavily covered |3.6.A.1| | 1 |
| Brake hydraulic reservoir fluid level decreases after several pedal applications |3.3.C.1| | 1 |
| Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis |5.3.6 |a| |ii|| | 1 |
| Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis |5.3.6 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
| Offside Front Anti-roll bar linkage has excessive play in a ball joint snapped |2.4.G.2| | 1 |
| Parking brake lever missing |1.1.6 |d|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front and rear sill (6.1.1 (c) (i)) | 1 |
| Offside Rear brake disc contaminated by brake fluid |3.5.1h| | 1 |
| Nearside Front Anti-roll bar linkage insecure drop link broke |2.4.G.1| | 1 |
| Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt split (5.3.4 (b) (ii)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits see print out (8.2.1.2 (c)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis |6.1.1 |c| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases Centrebox and tailbox (6.1.2 (a)) | 1 |
| Front Front position lamp|s| not working Both |1.1.A.3b| | 1 |
| Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps (4.1.3 (b)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded body sill |5.2.6| | 1 |
| Offside Body has a sharp edge caused by corrosion rear of sill holed and excessively corroaded |6.1.C.1| | 1 |
| Nearside Front Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
| Offside Front Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (sill quarter panel) (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassi (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassi (5.3.6 (a) (ii)) | 1 |
| Emissions not tested broken (8.2.1.2 (d)) | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill |6.1.A.1| | 1 |
| Front Main beam `tell-tale` not working |1.7.4c| | 1 |
| Offside Front position lamp|s| flickers when tapped lightly by hand |1.1.4c| | 1 |
| Offside Rear Lower Suspension arm corroded and seriously weakened Corroded and holed |2.4.G.1| | 1 |
| Central Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Exhaust has a major leak of exhaust gases middle section to rear box |7.1.2| | 1 |
| Nearside Front Headlamp levelling device inoperative (4.1.5 (a)) | 1 |
| Offside Rear Anti-roll bar insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Rear Brake disc contaminated (1.1.14 (b)) | 1 |
| Nearside Rear Body panel corroded and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Outer Brake pipe leaking |3.6.A.1| | 1 |
| Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill |5.3.6 |a| |ii|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg before & behind anti - roll bar |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg before & behind anti - roll bar |6.1.1 |c| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced centre chassis leg |6.1.1 |c| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber panel under bonnet |5.3.6 |a| |i|| | 1 |
| Offside Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Service brake excessively binding BOTH FRONTS (1.2.1 (f)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill arch (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie leg (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Seat belt buckle missing |7.1.2 |d|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch inner (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength roll bar mounting area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rollbar mounting area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/floor (5.3.6 (a) (i)) | 1 |
| Offside Inner Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Outer Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Parking brake operation is causing the vehicle to swerve to the offside |3.7.C.3a| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
| Offside Front Lower Body insecure spring (6.2.2 (a) (i)) | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/wheelarch (5.3.6 (a) (i)) | 1 |
| Central Front Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 1 |
| Nearside Front Tie bar/rod rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill panel - marked |2.4.A.3| | 1 |
| Offside Front Brake pipe leaking |3.6.A.1| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced nearside outer sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chssis leg (5.3.6 (a) (i)) | 1 |
| Nearside Front Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 1 |
| Offside Front Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill outter |6.1.B.2| | 1 |
| Nearside Front Lower Suspension arm attachment bracket/mounting fractured |2.4.G.1| | 1 |
| Nearside Front Lower Anti-roll bar linkage fractured |2.4.G.1| | 1 |
| Anti-lock braking system warning lamp is missing. |3.4.1a| | 1 |
| Offside Front Upper Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Centre Front Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Offside Rear Outer Integral body structure has excessive corrosion which adversely affects braking or steering Sill |6.1.1 |c| |ii|| | 1 |
| Rear Coil spring fractured or broken |5.3.1 |b| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch area (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced arch area (7.1.1 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area is inadequately repaired Chassis / inner wing (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is inadequately repaired Chassis / inner wing (5.3.6 (a) (i)) | 1 |
| Nearside Side repeater incorrect colour white light (4.4.3 (a)) | 1 |
| Nearside Rear Anti-roll bar severely distorted |2.4.G.1| | 1 |
| Offside Front Steering linkage ball joint has excessive play |2.1.3 |b| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg. (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis,under wheel arch,in front of wheel. |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis close to anti roll bar mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced corroded inner sill corner (7.1.1 (a) (i)) | 1 |
| Offside Rear Brake pipe leaking front too rear |3.6.A.1| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL CORRODED (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength INNER WHEEL ARCH AREA (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases joint by tail box (6.1.2 (a)) | 1 |
| Emissions not tested due to exhaust leak (8.2.1.2 (d)) | 1 |
| Nearside Front Road wheel fixings not compatible rubbing on front shock (5.2.2 (d)) | 1 |
| Offside Front Road wheel fixings not compatible rubbing on front shock (5.2.2 (d)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Under Side Chassis Rail |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Under Side Chassis Rail |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Outer Side Chassis Rail |2.4.A.3| | 1 |
| Nearside Front Side repeater incorrect colour gone to white light |1.4.A.2f| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6| | 1 |
| Emissions not tested exhaust split in two |8.2.1.2 |d|| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak exhaust split in two around middle area |8.2.1.1 |b|| | 1 |
| Central Exhaust silencer likely to become detached |8.1.1 |b| |ii|| | 1 |
| Rear Fuel system component insecure |7.2.1| | 1 |
| Offside Front coil spring incomplete |2.4.C.1a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mounting, lower chassis |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Anti roll bar mounting, lower chassis |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill
|2.4.A.3| | 1 |
| Offside Front Lower Anti-roll bar linkage corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Front Lower Anti-roll bar linkage corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Marked in yellow (6.2.2 (d) (i)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits too high |8.2.1.2 |c|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill holed and corroded (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill holed and corroded (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill holed and corroded (6.1.1 (c) (i)) | 1 |
| Engine MIL inoperative or indicates a malfunction light on dash (8.2.1.2 (h)) | 1 |
| Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front position lamp|s| obscured more than 50% |1.1.A.3c| | 1 |
| Offside Front Upper Front suspension retaining device missing |2.5.A.4| | 1 |
| Offside Rear brake caliper inappropriately repaired |3.5.1n| | 1 |
| Nearside Front Tie bar/rod worn and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting behind rear wheel (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases centre to rear join (6.1.2 (a)) | 1 |
| Emissions not tested major leak of exhaust gases (8.2.1.2 (d)) | 1 |
| Nearside Rear Brake hydraulic reservoir leaking hydraulic fluid |3.6.A.1| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassiss |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassiss |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced outer sill holed corroded (6.1.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced outer sill holed corroded (6.1.1 (a) (i)) | 1 |
| Offside Inner Rear Lower Brake pipe leaking |3.6.A.1| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting damaged and its strength is seriously reduced lower fixing bracket sheared off |2.4.G.1| | 1 |
| Nearside Upper Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Engine MIL inoperative or indicates a malfunction light reset stayed out. (knock sensor code). (8.2.1.2 (h)) | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting plate has a part not welded, (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded upper wheel arch |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis were roll bar mountings are located. |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis were roll bar mountings are located. |5.3.6 |a| |i|| | 1 |
| Power steering pipe/hose excessively corroded |2.1.5 |g| |i|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering off outer sill |6.1.A.1| | 1 |
| Offside Rear Brake pipe connection leaking on a hydraulic braking system top of junction block (1.1.11 (b) (ii)) | 1 |
| Nearside Front Brake lining(s) less than 1.5 mm thick (1.1.13 (a) (ii)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak centre pipe and rear box holed by the flange (8.2.1.1 (b)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch and sill (6.2.2 (d) (i)) | 1 |
| Hydraulic fluid leaking continuously posing a serious risk to road safety power steering pipe leaking (8.4.1 (a) (ii)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor corroded (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor corroded (6.2.2 (d) (i)) | 1 |
| Nearside Rear brake caliper securing device excessively deteriorated |3.5.1j| | 1 |
| Nearside Rear Brake linkage has abnormal movement of levers indicating maladjustment hand brake cable bracket on caliper missing |3.5.1f| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded finger and thumb pressure. sill holed and corroded within 30 cm of load bearing area |5.2.6| | 1 |
| Headlamp cleaning device inoperative |1.7.2| | 1 |
| Stop lamp not working all |1.2.1b| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch as marked |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar linkage insecure drop link |2.4.G.1| | 1 |
| Offside Front Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt anti roll bar (5.3.4 (b) (ii)) | 1 |
| Power steering pipe/hose excessively corroded x 3 (2.1.5 (g) (i)) | 1 |
| Power steering pipe/hose leaking @ n/s (2.1.5 (a)) | 1 |
| Seat belt anchorage prescribed area is excessively corroded BOTH sides outer sills at rear |5.2.6| | 1 |
| Supplementary restraint system warning lamp indicates a fault air bags |7.1.6 |a|| | 1 |
| Nearside Front Anti-roll bar linkage has excessive play in a ball joint snapped |2.4.G.2| | 1 |
| Offside Front Front suspension has a suspension lower ball joint securing nut loose nut and bolt missing |2.5.B.1a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected under sill |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
| coil spring fractured |2.4.C.1a| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill, outer sill, and inner arch area (7.1.1 (a) (i)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect bulb (4.1.2 (c)) | 1 |
| Electrical wiring inadequately supported alternator wiring |1.9.2a| | 1 |
| Offside Rear Body component damaged and likely to cause injury lamp damaged and sharp edge |6.2.1 |a| |i|| | 1 |
| Headlamp has a product on the lens so that the light output is severely reduced nearside and offside |4.1.4 |b|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
| Rear Brake pipe leaking front to rear |3.6.A.1| | 1 |
| Exhaust has a major leak of exhaust gases centre box |7.1.2| | 1 |
| Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Brake hose twisted |3.6.B.4c| | 1 |
| Hydraulic fluid leaking excessively steering pipe |8.4.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis corroded (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer and inner sills (7.1.1 (a) (i)) | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases at joint (6.1.2 (a)) | 1 |
| Steering locking device missing both front outer track rod ends |2.2.C.1g| | 1 |
| Offside Rear Body has a sharp edge caused by damage pannel |6.1.C.1| | 1 |
| Exhaust emits clearly visible black smoke during acceleration |8.2.1.2 |g|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced seal (6.1.1 (c) (i)) | 1 |
| Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Outer sill both sides (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner sill / floor pan |2.4.A.3| | 1 |
| Emissions not tested readings far too high - damage may be caused to testing equipment - test aborted. |7.3.A.1| | 1 |
| Headlamp aim projected beam image is obviously incorrect Both sides (4.1.2 (c)) | 1 |
| Nearside Rear Hydraulic fluid leaking continuously posing a serious risk to road safety brake caliper |8.4.1 |a| |ii|| | 1 |
| Offside Front Anti-roll bar linkage has excessive play in a ball joint parted |2.4.G.2| | 1 |
| Nearside Front Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded nearside outer sill/ rear end |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside outer sill / rear end |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Front Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill under car |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis Rail |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis Rail |5.3.6 |a| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel Arch |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel Arch |6.1.1 |c| |i|| | 1 |
| Offside Seat belt flexible stalk damaged likely to lead to failure under load |5.2.4a| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 1 |
| Offside Front Brake pipe connection leaking on a hydraulic braking system pipe to caliper |1.1.11 |b| |ii|| | 1 |
| Oil leaking excessively from transmission PIPE (8.4.1 (a) (i)) | 1 |
| Central Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
| Exhaust engine idle speed too high |7.3.A.2a| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Offside Rear rear brake recording little or no effort h brake |3.7.B.5a| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holes |7.1.1 |a| |i|| | 1 |
| Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Hydraulic brake cylinder leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
| Nearside Rear Upper Seat belt anchorage prescribed area strength or continuity significantly reduced Inner arch area |7.1.1 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases centre to rear |6.1.2 |a|| | 1 |
| Emissions not tested major blow |8.2.1.2 |d|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassia rail (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded ROLL BAR MOUNTING |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded ROLL BAR MOUNTING |2.4.A.3| | 1 |
| Nearside An item not tested |Manual| | 1 |
| Offside An item not tested |Manual| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill floor |5.2.6| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 1 |
| Offside Front Brake performance not tested Brake disc inner face flaking/corroded |3.7.A.1| | 1 |
| Front Headlamp has a product on the lens so that the light output is severely reduced Both (4.1.4 (b)) | 1 |
| Brake performance not tested Leaking Brake Fluid (1.2.1 (g)) | 1 |
| Offside Steering rack deformed and unserviceable |2.2.C.1d| | 1 |
| Bonnet retaining device excessively deteriorated |8.4.2| | 1 |
| Nearside Rear Tie bar/rod damaged and seriously weakened drop down link broken |2.4.G.1| | 1 |
| Offside Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both rear (6.1.1 (c) (i)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits fail the emission test (8.2.1.2 (c)) | 1 |
| Nearside Rear Anti-roll bar corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Rear Anti-roll bar corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill,holed by corrosion, (5.3.6 (a) (i)) | 1 |
| Power steering pipe/hose corroded such that the steering is adversely affected |2.1.5 |g| |ii|| | 1 |
| Offside Rear Hydraulic fluid leaking excessively caliper (8.4.1 (a) (i)) | 1 |
| Offside Upper Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded (7.1.1 (a) (i)) | 1 |
| Offside Inner Front Brake lining|s| insecure |3.5.1g| | 1 |
| Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Exhaust has a major leak of exhaust gases Rear to centre join |7.1.2| | 1 |
| Offside Front Subframe mounting prescribed area is severely distorted Chassis |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is inadequately repaired Chassis repair with filler/fibreglass |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
| Central Rear Upper Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition middle (8.1.1 (a)) | 1 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt clip missing (2.1.3 (g) (ii)) | 1 |
| Nearside Rear Outer Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Rear Exhaust emissions likely to be affected by an exhaust leak exhaust leak (8.2.1.1 (b)) | 1 |
| Rear Exhaust has a major leak of exhaust gases exhaust joint (6.1.2 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength innerarch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength innerarch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Steering wheel likely to become detached |2.2.1 |b| |ii|| | 1 |
| Engine MIL inoperative or indicates a malfunction dont effect emissions |8.2.1.2 |h|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill damaged. |6.1.1 |c| |i|| | 1 |
| Rear Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
| Ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and outer sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill not continuously welded |5.2.6| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor area |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor area |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2| | 1 |
| Central Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 1 |
| Nearside Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Drivers airbag missing sports steering wheel fitted (7.1.5 (a)) | 1 |
| Nearside Front Outer Steering locking device ineffective track rod split pin missing (2.1.3 (d)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 1 |
| Offside Front Anti-roll bar ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Rear Brake lining(s) less than 1.5 mm thick (1.1.13 (a) (ii)) | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |6.1.1 |c| |i|| | 1 |
| Front Exhaust has a major leak of exhaust gases cat joint corroded away cat between and centre |7.1.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill. (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired Floor. (5.3.6 (a) (i)) | 1 |
| Offside Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Nearside Outer Front Lower Suspension arm locating pin locking device missing |2.4.G.3b| | 1 |
| Front suspension locking device missing |2.5.A.4| | 1 |
| Front Brake pipe leaking on an air braking system to rear (1.1.11 (b) (i)) | 1 |
| Brake performance not tested due to fluid leak (1.2.1 (g)) | 1 |
| Nearside Front Anti-roll bar linkage pin or bush likely to become detached (5.3.4 (a) (ii)) | 1 |
| Service brake lagging in operation (1.2.1 (d)) | 1 |
| Offside Front Shock absorbers likely to become detached (5.3.2 (a) (ii)) | 1 |
| Offside Rear Suspension arm insecurely attached (5.3.3 (a) (i)) | 1 |
| Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Exhaust has a major leak of exhaust gases at joint with rear box |7.1.2| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis anti rool bar bracket (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis anti rool bar bracket (5.3.6 (a) (ii)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected skin sill |5.3.6 |a| |ii|| | 1 |
| Front front brake grabbing severely |3.7.A.2b| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis inner arch area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Panhard rod insecure |2.4.G.1| | 1 |
| Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Nearside Front Suspension arm ball joint excessively worn lower ball joint |5.3.4 |a| |i|| | 1 |
| Offside Rear Body panel corroded and likely to cause injury arch (6.2.1 (a) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Central Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill/body panel |5.2.6| | 1 |
| Nearside Front Braking system leaking calipair/hose |3.6.A.1| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill
|5.2.6| | 1 |
| Offside Front Hydraulic brake calliper leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg near suspension |6.1.B.2| | 1 |
| Nearside Front Brake pipe twisted |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Rear Rear fog lamp does not emit a steady red light white (4.5.4 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength In sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 1 |
| Offside Power steering ram|s| leaking from a failed seal |2.3.3b| | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded sill (5.2.6) | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded sill (5.2.6) | 1 |
| Offside Rear Brake pipe leaking on an air braking system Front to rear (1.1.11 (b) (i)) | 1 |
| Brake pedal has insufficient reserve travel Brake pedal goes to floor (1.1.2 (a)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer Sill panel excessively corroded in two (2) places (7.1.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 1 |
| Nearside Front Brake hose bulging under pressure (1.1.12 (d)) | 1 |
| Offside Front Lower Suspension arm locating pin insecure |2.4.G.3a| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak Rear Exhaust leak (8.2.2.1 (b)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassi leg corrission |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassi leg corrosion |6.1.A.1| | 1 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired Outer sill |5.2.6| | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Lower Ball joint has excessive play |2.2.B.1f| | 1 |
| rear brake recording little or no effort parking brake |3.7.B.5a| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded underbody sill |5.2.6| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength BOTH SIDES SILLS (5.3.6 (a) (i)) | 1 |
| Central Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition CAT MISSING (8.1.1 (a)) | 1 |
| Emissions not tested due to excessive exhaust blow (8.2.1.2 (d)) | 1 |
| Offside Rear Parking brake lever inoperative (1.1.6 (d)) | 1 |
| Central Exhaust has a major leak of exhaust gases joint leaking |6.1.2 |a|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded body sill panel adjacent to |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded body sill panel adjacent to |5.2.6| | 1 |
| Rear Anti-roll bar missing |2.4.G.1| | 1 |
| Nearside Front Subframe mounting prescribed area excessively damaged significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively damaged significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis leg (5.3.3 (b) (i)) | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis leg (5.3.3 (b) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded body sill |5.2.6| | 1 |
| Power steering pump leaking from a failed joint |2.3.3b| | 1 |
| Central Brake lever has insufficient reserve travel Handbrake has insufficient reserve travel (1.1.2 (a)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak High lambda (8.2.1.1 (b)) | 1 |
| Rear Exhaust has a major leak of exhaust gases Centre pipe to rear silencer (6.1.2 (a)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded / holed (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded / holed (7.1.1 (a) (i)) | 1 |
| Nearside Front Anti-roll bar linkage likely to become detached (5.3.3 (a) (ii)) | 1 |
| Rear Exhaust emissions likely to be affected by an exhaust leak box joint |8.2.1.1 |b|| | 1 |
| Rear Sub-frame attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
| Offside Front Suspension arm damaged and seriously weakened |2.4.G.1| | 1 |
| Brake performance not tested due to burst pipe (1.2.1 (g)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced 2 areas marked in yellow (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of wheel arch (5.3.6 (a) (i)) | 1 |
| Rear Brake pipe leaking on a hydraulic braking system o/s to n/s (1.1.11 (b) (ii)) | 1 |
| Rear Exhaust has a major leak of exhaust gases back box (6.1.2 (a)) | 1 |
| Nearside Front Headlamp aim so that beam "kick up" is not visible on the screen Nil beam pattern |bland| |4.1.2 |a|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER CILL (6.1.1 (c) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage ball joint likely to become detached |5.3.4 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch- as per marked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch- as per marked |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases mid box to rear box join corroded away |7.1.2| | 1 |
| Exhaust has a major leak of exhaust gases tailpipe |7.1.2| | 1 |
| Nearside Rear Lower Suspension arm corroded and seriously weakened holed |5.3.3 |b| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer body sill |5.2.6| | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened CHASSIS CRUMBLING AWAY (5.3.3 (b) (i)) | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened CHASSIS CRUMBLING AWAY (5.3.3 (b) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded Outer sill . |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced seat mounting (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill area |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill area |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases centre-rear |7.1.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
| Nearside Front All position lamps not working |4.2.1 |a|| | 1 |
| Exhaust has a major leak of exhaust gases middle |7.1.2| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Anti-roll bar linkage insecure and impairing directional stability |5.3.3 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis at anti-roll bar mounting. (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floorpan (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill and floor (6.1.1 (c) (i)) | 1 |
| Brake pipe leaking on a hydraulic braking system Front to rear |1.1.11 |b| |ii|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Under bonnet |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Multiple places as marked |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Multiple places as marked |5.3.6 |a| |i|| | 1 |
| Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Nearside Front Anti-roll bar attachment bracket modified and seriously weakened |2.4.A.2| | 1 |
| Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sills(both) (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced out sill (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe and anti roll bar mounting points |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength subframe and anti roll bar mounting points |5.3.6 |a| |i|| | 1 |
| Front Body has a sharp edge caused by damage no plate mount |6.1.C.1| | 1 |
| Nearside Front Anti-roll bar linkage has excessive play in a ball joint incomplete |2.4.G.2| | 1 |
| Seat belt buckle not functioning as intended belt mount insecure |7.1.2 |d|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
| Rear rear brake juddering severely |3.7.A.5b| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis
|2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired panel between door and rear wheel arch |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired panel between door and rear wheel arch |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings O/S/R outer sill corroded |6.1.B.2| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OUTER SILL (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OUTER SILL (6.2.2 (d) (i)) | 1 |
| Central Front Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassie rail |6.1.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassie rail |6.1.A.1| | 1 |
| Central Front Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Front Position lamp not working both sides (4.2.1 (a) (ii)) | 1 |
| Nearside Outer Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 1 |
| Nearside Rear Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
| Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Position lamp not working Both front (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired sill |7.1.1 |a| |i|| | 1 |
| Emissions not tested Due to exhaust blow |7.3.A.1| | 1 |
| Front position lamp|s| incorrect colour both sides |1.1.A.3e| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded roll bar |2.4.A.3| | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Front Position lamp not working o/s and n/s (4.2.1 (a) (ii)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Rear Anti-roll bar pin or bush excessively worn d bushes |5.3.4 |a| |i|| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg, forward of subframe mount, above ARB mount. Outer skin swollen and splitting. (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg, forward of subframe mount, above ARB mount. Outer skin swollen and splitting. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar has excessive play in a ball joint link bar worn |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a ball joint link bar worn |2.4.G.2| | 1 |
| brake disc excessively scored |3.5.1h| | 1 |
| Offside Rear Lower Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill area (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill area (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill area (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill area (6.2.2 (d) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases tail pipe missing |7.1.2| | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Rear Body has a sharp edge caused by damage bumper |6.1.C.1| | 1 |
| Nearside Rear Radius arm corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is severely distorted outer sill |2.4.A.3| | 1 |
| Nearside Front Inner Brake disc significantly and obviously worn inner swept area heavily corroded (1.1.14 (a) (i)) | 1 |
| Offside Front Inner Brake disc significantly and obviously worn inner swept area heavily corroded (1.1.14 (a) (i)) | 1 |
| Suspension component mounting prescribed area is excessively corroded both inner sills |2.4.A.3| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis to floor |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis to floor |6.1.1 |c| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both rear inner wheel arches to inner sills |6.1.1 |c| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Stop lamp|s| lens defective such that the emitted light is adversely affected damaged |4.3.1 |b| |ii|| | 1 |
| Offside Headlamp aim beam image too far to the right |1.6.B4| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis within 30cms of top suspension |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis within 30cms of top suspension components |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point and separate hole (5.3.6 (a) (i)) | 1 |
| Emissions not tested due to rear exhaust broken (8.2.1.2 (d)) | 1 |
| Offside Rear Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
| Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
| Offside Rear Subframe mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Rear Rear position lamp|s| not working both |1.1.A.3b| | 1 |
| Nearside Front Shock absorber casing corroded externally so the unit does not function |2.7.2a| | 1 |
| Offside Front Lower Shock absorber casing corroded externally so the unit does not function |2.7.2a| | 1 |
| Nearside Front Lower Anti-roll bar attachment bracket/mounting weld cracked |2.4.G.1| | 1 |
| Offside Front Upper Anti-roll bar attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Suspension arm has excessive play in a track control arm inner bush |2.5.B.2b| | 1 |
| Offside Front Suspension arm has excessive play in a track control arm inner bush |2.5.B.2b| | 1 |
| Nearside Rear Braking system leaking Brake Caliper |3.6.A.1| | 1 |
| Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill and inner wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Offside Rear Anti-roll bar linkage ball joint likely to become detached |5.3.4 |a| |ii|| | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Emissions not tested Exhaust Blow. (8.2.1.2 (d)) | 1 |
| Front Exhaust fumes causing a danger to health of persons on board (6.1.2 (b) (ii)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt Outer (5.3.4 (b) (ii)) | 1 |
| Offside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Front Position lamp not working X2 (4.2.1 (a) (ii)) | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect no image and or pattern (4.1.2 (c)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect no image and or pattern (4.1.2 (c)) | 1 |
| Front Brake disc significantly and obviously worn heavily corroded and rusted, inner and outer. (1.1.14 (a) (i)) | 1 |
| Rear Brake disc significantly and obviously worn heavily corroded and rusted, inner and outer. (1.1.14 (a) (i)) | 1 |
| Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both side sills (6.2.2 (d) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced excess corrosion within 30cms of anchorage points on both sides (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Rear Outer Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Rear fog lamp likely to become detached (4.5.1 (c) (ii)) | 1 |
| Centre Exhaust has a major leak of exhaust gases (7.1.2) | 1 |
| Front Windscreen wiper not operating automatically when switched on (8.2.1b) | 1 |
| Offside Front Braking system leaking (3.6.A.1) | 1 |
| Nearside Rear Braking system leaking (3.6.A.1) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Centre Rear fog lamp excessively damaged so that it is not visible from a reasonable distance |1.3.2d| | 1 |
| Offside Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) | 1 |
| Nearside Front passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 1 |
| Offside Rear Service brake excessively binding Handbrake lever arm not returning to the off position when handbrake lever is used (1.2.1 (f)) | 1 |
| Exhaust system not adequately supported centre hanger missing |7.1.1| | 1 |
| Offside Steering rack retaining devices dangerously loose (2.1.2 (a) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded |7.1.1 |a| |i|| | 1 |
| Nearside Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 1 |
| Offside Obligatory mirror missing (3.3 (a)) | 1 |
| Nearside Obligatory mirror missing (3.3 (a)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 1 |
| Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Obligatory mirror missing |8.1.1| | 1 |
| Offside Front Anti-roll bar linkage damaged and seriously weakened (5.3.3 (b) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i)) | 1 |
| Exhaust emissions carbon monoxide content at idle excessive 0.36% |7.3.D.4| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive 0.38% |7.3.D.3| | 1 |
| Nearside brake caliper leaking |3.6.A.1| | 1 |
| Body component damaged and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill as marked (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail as marked (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail as marked (5.3.6 (a) (i)) | 1 |
| Front Service brake lagging in operation brake application uneven |1.2.1 |d|| | 1 |
| Offside Rear Lower Suspension arm corroded and seriously weakened corroded and holed |5.3.3 |b| |i|| | 1 |
| Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (inner wing area) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner + outer sill (7.1.1 (a) (i)) | 1 |
| Front Braking system leaking to rear at rear |3.6.A.1| | 1 |
| Nearside Rear Tie bar/rod attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Nearside Front Brake lining|s| less than 1.5 mm thick |1.1.13 |a| |ii|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Emissions not tested car over heated during catalyst stabilisation (8.2.1.2 (d)) | 1 |
| Front position lamp|s| not working both side front side lamps |1.1.A.3b| | 1 |
| Emissions not tested exhaust blow (8.2.1.2 (d)) | 1 |
| Offside Rear Parking |secondary brake| on a single line braking system grabbing severely |1.3.1 |c|| | 1 |
| Oil leaking excessively from engine on engine |8.4.1 |a| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in engine bay |6.1.1 |c| |i|| | 1 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Offside Front Seat belt retracting mechanism defective |7.1.2 |e|| | 1 |
| Offside Outer Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Parking brake lever, pawl mechanism pivot|s| or their associated mountings locking device insecure |3.1.4b| | 1 |
| Brake performance not tested due to leaking caliper (1.2.1 (g)) | 1 |
| Rear Electrical wiring inadequately supported |1.9.2a| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg inside wheelarch |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner chassi |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner chassi |5.3.6 |a| |i|| | 1 |
| Centre Braking system leaking front to rear brake pipe |3.6.A.1| | 1 |
| Nearside Steering locking device missing |2.2.C.1g| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings antiroll bar mount |6.1.B.2| | 1 |
| Boot lid component likely to become detached spoiler brackets snapped. |6.2.1 |a| |ii|| | 1 |
| Brake lever has insufficient reserve travel Handbrake high. |1.1.2 |a|| | 1 |
| Offside Front Position lamp not working sidelight |4.2.1 |a|| | 1 |
| Nearside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill. |6.2.2 |d| |i|| | 1 |
| Front An item not tested |Manual| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis holed within 30 cm (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under drivers floor holed (5.3.6 (a) (i)) | 1 |
| Rear Battery insecure and likely to cause a short circuit not fixed (4.13 (a) (ii)) | 1 |
| Offside Front Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced chassis |2.4.G.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis anti roll bar mount point |2.4.A.3| | 1 |
| Nearside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Steering wheel locking device insecure |2.1.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill and wheel arch (7.1.1 (a) (i)) | 1 |
| Nearside Headlamp light source and lamp not compatible LED bulbs fitted in main and dipped beam standard headlamp (4.1.4 (c)) | 1 |
| Offside Headlamp light source and lamp not compatible LED bulbs fitted in main and dipped beam standard headlamp (4.1.4 (c)) | 1 |
| Electrical wiring likely to touch hot or rotating parts lambda wire touching exhaust (4.11 (a) (iii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis to inner flitch (6.1.1 (c) (i)) | 1 |
| Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength iner sill (5.3.6 (a) (i)) | 1 |
| Offside Front Road wheel badly distorted |5.2.2 |c| |i|| | 1 |
| Offside Rear Floor excessively deteriorated Rear sill corrosion, hole in sill. |6.2.4 |a| |i|| | 1 |
| Nearside Rear Floor excessively deteriorated Rear boot floor, hole in floor. |6.2.4 |a| |i|| | 1 |
| Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill panel corroded. (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill panel corroded. (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced excessive corrosion to outrigger at abutment to jacking point. (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside front chassis leg excessively corroded. (6.1.1 (c) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded Outer sill panel |5.2.6| | 1 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 1 |
| Central Exhaust has a major leak of exhaust gases Joint (6.1.2 (a)) | 1 |
| Offside Front Front suspension locking device ineffective lower ball joint retaining bolt not in lock nut |2.5.A.4| | 1 |
| Driver`s door cannot be opened from inside the vehicle ONLY WHEN KEY IS REMOVED |6.2.B.1b| | 1 |
| Central Exhaust has a major leak of exhaust gases Middle box blowing |6.1.2 |a|| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak Lambder reading effected by exhaust leak |8.2.1.1 |b|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced side sill corroded (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie holled (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie holled (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill holled (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie holled engine bay (5.3.6 (a) (i)) | 1 |
| Central Rear Exhaust has a major leak of exhaust gases silencer & joint corroded (6.1.2 (a)) | 1 |
| Power steering pipe/hose excessively corroded on rack (2.1.5 (g) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear mounting on front subframe (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear mounting on front subframe (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassie |2.4.A.3| | 1 |
| Nearside Rear Exhaust has a major leak of exhaust gases box corroded (6.1.2 (a)) | 1 |
| Nearside Front Upper Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Rear Lower Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Exhaust emissions exceed manufacturers specified limit CO (8.2.2.2 (a)) | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Body sill (7.1.1 (a) (i)) | 1 |
| Brake performance not tested Due to burst pipe on o/s/f (1.2.1 (g)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front chassis by anti roll bar mount |5.3.6 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired outer sill |7.1.1 |a| |i|| | 1 |
| Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Steering column universal joint deformed (2.1.3 (c) (i)) | 1 |
| Nearside Subframe mounting prescribed area excessively corroded significantly reducing structural strength Front sub frame rear mount chassis rail (5.3.6 (a) (i)) | 1 |
| Offside Subframe mounting prescribed area excessively corroded significantly reducing structural strength front sub frame rear mount chassis rail (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer Sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid caliper leaking (1.1.16 (b) (i)) | 1 |
| Front Position lamp switch faulty |1.1.A.1| | 1 |
| Offside Hazard warning lamps inoperative (4.4.1 (e)) | 1 |
| Offside Rear Shock absorbers has negligible damping effect (5.3.2 (d)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced n/s outer sill (7.1.1 (a) (i)) | 1 |
| Steering component mounting prescribed area is excessively corroded o/s front floor corroded (2.1.2 (e) (i)) | 1 |
| Offside Front Track rod end seriously misaligned |2.2.C.1b| | 1 |
| Nearside Front Track rod end seriously misaligned |2.2.C.1b| | 1 |
| Steering rack damaged and unserviceable |2.2.C.1d| | 1 |
| Front Sub-frame fractured |2.4.G.1| | 1 |
| Offside Front Steering rack cracked and unserviceable |2.2.C.1d| | 1 |
| Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill end (5.3.6 (a) (i)) | 1 |
| Central Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
| Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Headlamps matched pair are not the same colour (4.1.4 (d)) | 1 |
| Offside Front Shock absorber has negligible damping effect (2.7.5) | 1 |
| Offside Rear fog lamp not working (1.3.2b) | 1 |
| Nearside Front Shock absorbers likely to become detached Nut and Bolt loose (5.3.2 (a) (ii)) | 1 |
| Service brake excessively binding both (1.2.1 (f)) | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Emissions not tested due to exhaust blow and no catalist fitted (8.2.1.2 (d)) | 1 |
| Rear Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
| Nearside Rear Upper coil spring broken |2.4.C.1a| | 1 |
| Front position lamp|s| not working Both |1.1.A.3b| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt Top ball joint |2.4.G.2| | 1 |
| Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt Top ball joint |2.4.G.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded Inner sill |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded Inner sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Inner vsill |5.2.6| | 1 |
| Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer rear sill (7.1.1 (a) (i)) | 1 |
| Front Brake hose excessively stretched Both (1.1.12 (b) (ii)) | 1 |
| Emission control equipment obviously defective Rear exhaust sensor wiring broken (8.2.1.1 (a)) | 1 |
| Nearside Power steering pipe/hose leaking (2.1.5 (a)) | 1 |
| Offside Valve stem seriously damaged |4.1.D.1e| | 1 |
| Nearside Rear Hydraulic brake calliper leaking and braking performance affected |1.1.16 |b| |ii|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i|| | 1 |
| Offside Front Service brake is causing the steering wheel to severely pull one way brake seized (1.2.1 (b) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill outer panel by lower seat belt anchor point (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail x2 (5.3.6 (a) (i)) | 1 |
| Centre Brake pipe excessively damaged |3.6.B.2c| | 1 |
| Exhaust system not adequately supported tail pipe |7.1.1| | 1 |
| Exhaust has a major leak of exhaust gases tail pipe |7.1.2| | 1 |
| Nearside Rear Braking system leaking BRAKE CALIPER |3.6.A.1| | 1 |
| Offside Rear Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
| Rear Power steering pipe|s| or hose|s| leaking from a joint Low pressure side |2.3.3b| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Inner and outer sills |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Chassis rail |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis rail |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill excessively corroded |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill excessively corroded |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension arm locating pin locking device missing |2.4.G.3b| | 1 |
| Nearside Outer Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill marked yellow |6.1.B.2| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill also has sharp edges |6.1.B.2| | 1 |
| Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Offside Front Lower Suspension rod ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Emissions not tested petrol cat test |7.3.A.1| | 1 |
| Exhaust has a major leak of exhaust gases centre and rear |7.1.2| | 1 |
| Exhaust system not adequately supported centre and rear |7.1.1| | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect lens deteriorated / clouded (4.1.2 (c)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect lens deteriorated / clouded (4.1.2 (c)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill outer skin corroded |6.1.B.2| | 1 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded and holed (6.1.1 (c) (i)) | 1 |
| Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded and holed (6.1.1 (c) (i)) | 1 |
| Nearside Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
| Offside Power steering component|s| leaking |2.3.3b| | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded chassis front leg (2.1.2 (e) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill |6.1.A.1| | 1 |
| Offside Rear Brake pipe seriously damaged |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Offside Front Anti-lock braking system component missing senser |3.4.2| | 1 |
| Fuel hose leaking |7.2.3| | 1 |
| Offside Rear Anti-roll bar linkage insecure and impairing directional stability Broken |5.3.3 |a| |ii|| | 1 |
| Centre Front Body has a projection caused by damage |6.1.C.1| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded centre outer sill |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded centre to rear inner sill |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner floor to sill |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Power steering pump leaking from a failed component |2.3.3b| | 1 |
| Offside Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill corroded within seat belt mounting area |7.1.1 |a| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner chassis leg |6.1.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner chassis leg |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases Blow from rear silencer join |7.1.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6| | 1 |
| Nearside Front Brake pipe likely to become detached or damaged hose to pipe insecure |1.1.11 |d| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Chassis Leg (5.3.6 (a) (i)) | 1 |
| Power steering component leaking Steering Rack (2.1.5 (a)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded wheel arch nr anti roll bar hanger |2.4.A.3| | 1 |
| Nearside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Anti-lock braking system component missing Wire cut. (1.6 (e)) | 1 |
| Emissions not tested No cat convertor fitted! (8.2.1.2 (d)) | 1 |
| Offside Front Lower Anti-roll bar linkage ball joint excessively worn Tighten up? (5.3.4 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced mid sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Bumper damaged and likely to cause injury when grazed or contacted |6.1.4 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 1 |
| Front Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Rear Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded side sill holed & corroded |5.2.6| | 1 |
| Nearside Rear Sub-frame attachment bracket/mounting insecure bolt snapped (5.3.3 (a) (i)) | 1 |
| Offside Rear Braking system leaking brake caliper (1.1.3 (d)) | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect glazed (4.1.2 (c)) | 1 |
| Nearside Headlamp lens seriously defective glazed (4.1.1 (b) (ii)) | 1 |
| Emissions not tested failing but was getting to hot to continue |8.2.2.2 |e|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg next to upper wishbone mounting |2.4.A.3| | 1 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Offside Front Seat belt flexible stalk damaged likely to lead to failure under load Failed tension test |5.2.4a| | 1 |
| Central Obligatory mirror missing |3.3 |a|| | 1 |
| Exhaust has a major leak of exhaust gases +emmisions n/t |7.1.2| | 1 |
| Nearside Rear Braking system leaking caliper pipe to union |3.6.A.1| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced arch (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced arch (7.1.1 (a) (i)) | 1 |
| Fluid leaking continuously posing a serious risk to road safety Power steering fluid leak (8.4.1 (a) (ii)) | 1 |
| Offside Front Anti-roll bar linkage insecurely attached broken |5.3.3 |a| |i|| | 1 |
| Offside Rear Outer Brake lining|s| less than 1.5 mm thick Half off friction pad missing |3.5.1g| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded of outer sill |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded of outer sill |5.2.6| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced SILL / FLOOR (7.1.1 (a) (i)) | 1 |
| Emissions not tested Silencer missing (8.2.1.2 (d)) | 1 |
| Nearside Rear Upper Suspension arm pin or bush excessively worn Rose bush at hub (5.3.4 (a) (i)) | 1 |
| Offside Rear Upper Suspension arm pin or bush excessively worn Rose bush at hub (5.3.4 (a) (i)) | 1 |
| Nearside Rear Lower Suspension arm pin or bush likely to become detached Retaining nut missing (5.3.4 (a) (ii)) | 1 |
| Nearside Upper Axle insecure such that stability is impaired Mounting bolts missing (5.1.1 (b) (ii)) | 1 |
| Offside Upper Axle insecure such that stability is impaired Mounting bolts (5.1.1 (b) (ii)) | 1 |
| Offside Front Upper Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal section |6.1.B.2| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal section |6.1.B.2| | 1 |
| Nearside Front Anti-roll bar linkage insecure broken |2.4.G.1| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis upper wishbone area |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis upper wishbone area |5.3.6 |a| |i|| | 1 |
| Centre Exhaust has a major leak of exhaust gases and rear |7.1.2| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition rear box missing |7.1.4| | 1 |
| Offside Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
| Offside Front Anti-roll bar linkage ball joint excessively worn Insecure (5.3.4 (a) (i)) | 1 |
| Offside Rear Outer Anti-roll bar linkage ball joint excessively worn Insecure (5.3.4 (a) (i)) | 1 |
| Headlamp has more than 1/2 LEDs not functioning (4.1.1 (a) (ii)) | 1 |
| Brake pipe inadequately clipped and chafing on transmission tunnel |3.6.B.1| | 1 |
| Front Anti-roll bar linkage insecure both sides |2.4.G.1| | 1 |
| Nearside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced outter sill (6.1.1 (d) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Rear wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Rear wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired Sill plate also corroded. (7.1.1 (a) (i)) | 1 |
| Nearside Front Macpherson strut damaged and seriously weakened (5.3.3 (b) (i)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn both rear d bushes (5.3.4 (a) (i)) | 1 |
| Nearside Rear Brake cable damaged (1.1.15 (a)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
| Drivers door cannot be opened from inside the vehicle (6.2.3 (a)) | 1 |
| Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii)) | 1 |
| Offside Front front brake binding wheel bearing not checked |3.7.B.1| | 1 |
| Emissions not tested due to low oil level |7.3.A.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Sill area |5.2.6| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Inner wing |2.4.A.3| | 1 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner w/arch (6.1.1 (c) (i)) | 1 |
| Exhaust has a major leak of exhaust gases leaking from flange on rear box (6.1.2 (a)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak Lambda value too high due to exhaust leak (8.2.1.1 (b)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 1 |
| Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt both sides (2.1.3 (g) (ii)) | 1 |
| Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt both side (5.3.4 (b) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases cat joint (6.1.2 (a)) | 1 |
| Nearside Rear Upper Suspension arm attachment bracket/mounting insecure bolt loose |5.3.3 |a| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill holed |5.2.6| | 1 |
| Offside Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii)) | 1 |
| Nearside rear brake recording little or no effort no reading |3.7.B.5a| | 1 |
| Offside rear brake recording little or no effort no reading |3.7.B.5a| | 1 |
| Offside Seat belt of the wrong type has no BSI marking (7.1.2 (c)) | 1 |
| Headlamp aim projected beam image is obviously incorrect no kick up on either lamp (4.1.2 (c)) | 1 |
| Nearside Front Position lamp missing (4.2.1 (a) (ii)) | 1 |
| Offside Front Position lamp missing (4.2.1 (a) (ii)) | 1 |
| Nearside Front Brake hose excessively damaged split (1.1.12 (b) (ii)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn both sides (5.3.4 (a) (i)) | 1 |
| Central Exhaust has a major leak of exhaust gases catalytic converter (6.1.2 (a)) | 1 |
| Exhaust emits dense blue smoke at idle emission not tested low on oil |7.3.A.2b| | 1 |
| Offside Front Side repeater not working (4.4.1 (a) (ii)) | 1 |
| Offside Front Hazard warning lamps inoperative (4.4.1 (e)) | 1 |
| Offside Rear Hazard warning lamps inoperative (4.4.1 (e)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top strut mount (5.3.6 (a) (i)) | 1 |
| Offside Front Hydraulic fluid leaking excessively brake caliper (8.4.1 (a) (i)) | 1 |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt split (2.1.3 (g) (ii)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt split (5.3.4 (b) (ii)) | 1 |
| Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3| | 1 |
| Headlamp has a product on the lens so that the light output is severely reduced both front (4.1.4 (b)) | 1 |
| Nearside Front Lower Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Lower Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Parking brake efficiency below requirements |3.7.D.4| | 1 |
| Offside Front Brake hose excessively damaged (1.1.12 (b) (ii)) | 1 |
| Nearside Rear Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Electrical wiring insecure and connectors likely to become disconnected wiring above brake pedals |4.11 |a| |ii|| | 1 |
| Offside Front Macpherson strut pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Shock absorbers damaged to the extent that it does not function (5.3.2 (b)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor pan (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension arm cracked |2.4.G.1| | 1 |
| Centre Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner/outer sill (6.2.2 (d) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases box |7.1.2| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced OUTTER SILL (6.1.1 (c) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced N/S AND O/S SILL BACK AND FLOORS (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Suspension arm insecurely attached bolt loose (5.3.3 (a) (i)) | 1 |
| Bonnet primary retaining device insecure (3.1 (c)) | 1 |
| Exhaust has a major leak of exhaust gases back box (6.1.2 (a)) | 1 |
| Offside Rear Battery insecure and likely to cause a short circuit battery bracket loose (4.13 (a) (ii)) | 1 |
| Offside Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 1 |
| Rear fog lamp obviously incorrectly positioned |1.3.2a| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced centre of outer sill corroded (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre of inner sill corroded (7.1.1 (a) (i)) | 1 |
| Nearside Front Headlamp insecure (4.1.1 (c)) | 1 |
| Nearside Front Upper Suspension arm locating pin locking device missing |2.4.G.3b| | 1 |
| Brake pipe leaking front to rear |3.6.A.1| | 1 |
| Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroied (6.1.1 (c) (i)) | 1 |
| Nearside Front Obligatory indirect vision device missing (3.3 (a)) | 1 |
| Rear Exhaust carbon monoxide content at idle exceeds manufacturers specified limits (8.2.1.2 (b)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits 1.037 / 1.059 (8.2.1.2 (c)) | 1 |
| Front Exhaust emissions likely to be affected by an exhaust leak front pipe flange joint (8.2.1.1 (b)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill as chalked (5.3.6 (a) (i)) | 1 |
| Brake hydraulic reservoir leaking hydraulic fluid |3.6.A.1| | 1 |
| Nearside Front Anti-roll bar linkage attachment bracket/mounting likely to fail (5.3.3 (b) (ii)) | 1 |
| Offside Front Anti-roll bar linkage attachment bracket/mounting likely to fail (5.3.3 (b) (ii)) | 1 |
| Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected o/s and n/s/f rollbar (5.3.6 (a) (ii)) | 1 |
| Nearside Front Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Offside Track rod end seriously misaligned |2.2.C.1b| | 1 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Front Direction indicators incorrect colour |1.4.A.2f| | 1 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded closing sill,inner wheel arch and outersill |5.2.6| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded closing sill |2.4.A.3| | 1 |
| Rear Rear fog lamp not working (1.3.2b) | 1 |
| Rear fog lamp tell tale not working (1.3.1b) | 1 |
| Centre Rear Stop lamp not working (1.2.1b) | 1 |
| Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b) | 1 |
| Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
| Offside front brake binding (3.7.B.1) | 1 |
| Offside Front Anti-roll bar linkage insecure detached from ball joint |2.4.G.1| | 1 |
| Rear fog lamp tell tale missing |1.3.1b| | 1 |
| Offside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Rear Fuel system component insecure fuel pipe securing bracket damaged |7.2.1| | 1 |
| Offside Rear Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 1 |
| Nearside Rear Sub-frame attachment bracket/mounting nut missing |2.4.G.1| | 1 |
| Offside Front Power steering ram|s| leaking from a failed seal |2.3.3b| | 1 |
| Offside Rear Tie bar/rod attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Nearside Front Service brake lagging in operation |1.2.1 |d|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded anti roll bar |2.4.A.3| | 1 |
| Nearside Rear position lamp|s| insecure |1.1.A.3a| | 1 |
| Offside Rear position lamp|s| insecure |1.1.A.3a| | 1 |
| Front Bumper likely to become detached (6.1.4 (a) (ii)) | 1 |
| Front Bumper insecure (6.1.4 (a) (i)) | 1 |
| Nearside Front Seat belt buckle missing (7.1.2 (d)) | 1 |
| Passengers seat insecure (6.2.6 (a) (ii)) | 1 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill area (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill area (6.2.2 (d) (i)) | 1 |
| Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension arm attachment bracket/mounting corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
| Offside Rear Coil spring corroded so that its cross sectional area is reduced and seriously weakened |5.3.1 |b| |i|| | 1 |
| Offside Front Anti-roll bar linkage corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Front Anti-roll bar linkage corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Suspension arm rubber bush deteriorated resulting in excessive movement both upper inner bushes have longitudinal movement |2.4.G.2| | 1 |
| Suspension arm rubber bush deteriorated resulting in excessive movement Nearside front lower inner bushes worn and creating play longitudinally, |2.4.G.2| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sill holed |5.2.6| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Emissions not tested exhaust leak (8.2.1.2 (d)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill and floor (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill and floor (7.1.1 (a) (i)) | 1 |
| Nearside Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced OUTER SILL (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded SILL |5.2.6| | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened mounting point on chassis forward of subframe |5.3.3 |b| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill excessively corroded |7.1.1 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis, forward of subframe |5.3.6 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis, forward of subframe |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength N/S REAR OUTER SILL |5.3.6 |a| |i|| | 1 |
| Offside Front Obligatory mirror missing (3.3 (a)) | 1 |
| Offside Front Lower Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill panel. |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired chassis rail repair plate not welded to chassis. |2.4.A.3| | 1 |
| Offside Rear Brake pipe leaking on an air braking system front to rear |1.1.11 |b| |i|| | 1 |
| Brake performance not tested brake pipe burst under pressure |1.2.1 |g|| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded sillbox |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded sillbox |5.2.6| | 1 |
| Front position lamp|s| not working nearside and offside |1.1.A.3b| | 1 |
| Rear Exhaust has a major leak of exhaust gases centre to rear join corroded |7.1.2| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch area |5.3.6 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases Rear silencer flange deteriorated |7.1.2| | 1 |
| Nearside Rear Anti-roll bar ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Rear Anti-roll bar ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Front Sub-frame attachment bracket/mounting insecure Rear bolt missing |5.3.3 |a| |i|| | 1 |
| Offside Front Sub-frame attachment bracket/mounting insecure Rear bolt missing |5.3.3 |a| |i|| | 1 |
| Nearside Rear Anti-roll bar missing (5.3.3 (a) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases on joint |6.1.2 |a|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner sill/floor area corroded through (6.2.2 (d) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail area by top suspension area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength undersill (5.3.6 (a) (i)) | 1 |
| Offside Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner sill, lower section mising (6.2.2 (d) (ii)) | 1 |
| Central Rear Brake pipe at imminent risk of failure or fracture above axle , along subframe area nearside and offside (1.1.11 (a)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired in front of radiator area (6.2.2 (d) (ii)) | 1 |
| Offside Front Brake pipe at imminent risk of failure or fracture at brake flexible hose inlet area (1.1.11 (a)) | 1 |
| Offside Rear Suspension arm corroded and seriously weakened corroded through the arm (5.3.3 (b) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected corroded through (5.3.6 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected chassis section corroded and split open (5.3.6 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases exhaust broken (6.1.2 (a)) | 1 |
| Nearside Front Anti-roll bar linkage pin or bush likely to become detached Missing (5.3.4 (a) (ii)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Sill (6.2.2 (d) (ii)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Sill (6.2.2 (d) (ii)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill area (7.1.1 (a) (i)) | 1 |
| Front Engine MIL inoperative or indicates a malfunction |8.2.1.2 |h|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded antiroll bar mount |inner wheel arch/chassis area| |2.4.A.3| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering sill`s both sides |6.1.A.1| | 1 |
| Nearside Seat belt flexible stalk deteriorated likely to lead to failure under load Missing |5.2.4a| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis leg |6.1.A.1| | 1 |
| Offside Rear Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing and chassis leg |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner & outer sill area |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded INNER & OUTER SILL |5.2.6| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Offside Brake pipe leaking on an air braking system |1.1.11 |b| |i|| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sil (5.3.6 (a) (i)) | 1 |
| Emissions not tested missing and over heating (8.2.1.2 (d)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill underneath (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill underneath (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill underneath (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre sill underneath (7.1.1 (a) (i)) | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment hand brake travel excessive (1.1.6 (c)) | 1 |
| Offside Front Headlamp not working on dipped beam plug burnt out causing bulb not to work (4.1.1 (a) (ii)) | 1 |
| Horn not working horn not working - aftermarket steering wheel (7.7 (a) (ii)) | 1 |
| Offside Rear position lamp|s| incomplete |1.1.4a| | 1 |
| Offside Front Track rod end modification unsafe (2.1.3 (f) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wishbone front bush area (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wishbone front bush area (5.3.6 (a) (i)) | 1 |
| Offside Rear Hydraulic fluid leaking excessively Calliper (8.4.1 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 1 |
| Front position lamp|s| not working both side lights |1.1.A.3b| | 1 |
| Brake pipe leaking Front to rear brake pipe |3.6.A.1| | 1 |
| Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing, strut top |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced o/s/f chassis corroded |7.1.1 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively damaged significantly reducing structural strength o/s/r floor /sill (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 1 |
| Offside Front Steering rack has excessive free play detected at the steering wheel (steering rack fitted) play in steering rack (2.3 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch area chassie areas (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill/ floor panel. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Wheel arch/chassis. (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded hole in sill |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded hole in sill on n s r |5.2.6| | 1 |
| Offside Front Front position lamp|s| not working side light |1.1.A.3b| | 1 |
| Offside Front Front position lamp|s| not working no side light |1.1.A.3b| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer and inner sill and inner lower wheel arch is holed and corroded. (7.1.1 (a) (i)) | 1 |
| Offside Outer Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is severely distorted |5.2.6| | 1 |
| Fuel cap/sealing device ineffective temp cap fitted (6.1.3 (b) (i)) | 1 |
| Front Position lamp missing (4.2.1 (a) (ii)) | 1 |
| Headlamp excessively deteriorated so that the light output is severely reduced both |1.7.5a| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i)) | 1 |
| Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting both side (6.2.2 (d) (i)) | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting insecure |5.3.3 |a| |i|| | 1 |
| Rear Exhaust emissions likely to be affected by an exhaust leak rear silencer |8.2.1.1 |b|| | 1 |
| Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
| Offside Front Brake pipe leaking on a hydraulic braking system Pipe coming out of master cylinder (1.1.11 (b) (ii)) | 1 |
| Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Rear fog lamp insecure |1.3.2a| | 1 |
| Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/floor (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor/chassis (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension arm attachment bracket/mounting insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Offside Front Suspension arm attachment bracket/mounting insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
| Nearside Front Suspension arm ball joint likely to become detached retaining nut missing (5.3.4 (a) (ii)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Front Shock absorber has negligible damping effect |2.7.5| | 1 |
| Fluid suspension has no suspension movement |2.4.D.5| | 1 |
| Exhaust has a major leak of exhaust gases manifold flexi. (6.1.2 (a)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced hole in floor (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded CHASSIS |2.4.A.3| | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded SILL |2.4.A.3| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded SILL |2.4.A.3| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded SILL |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded SILL |5.2.6| | 1 |
| Rear Service brake effort inadequate at a wheel both (1.2.1 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis, rotten, holed |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis, holed |2.4.A.3| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill, holed |5.2.6| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill, holed |5.2.6| | 1 |
| Nearside Front Shock absorbers insecurely attached Lower bolt loose (5.3.2 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg by anti roll bar mount |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases rear exhaust silencer flange (6.1.2 (a)) | 1 |
| Nearside Rear position lamp|s| incomplete |1.1.4a| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner chassis |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 1 |
| Offside Front Steering retaining device missing Track rod end split pin |2.2.C.1g| | 1 |
| Offside Front Upper Front suspension retaining device missing Ball joint split pin |2.5.A.4| | 1 |
| Offside Front Lower Front suspension retaining device missing Ball joint split pin |2.5.A.4| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside front chassis |2.4.A.3| | 1 |
| Nearside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill/sill end |5.3.6 |a| |i|| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` video device |8.3.1e| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill inner & outer (7.1.1 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i)) | 1 |
| Rear Service brake has no recorded effort at a wheel Both (1.2.1 (a) (ii)) | 1 |
| Brake pedal has insufficient reserve travel Spongy (1.1.2 (a)) | 1 |
| Front Sub-frame insecure and impairing directional stability 2x bolts missing |5.3.3 |a| |ii|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer seal (6.1.1 (c) (i)) | 1 |
| Nearside Front Power steering pipe/hose leaking power steering pipe leaking (2.1.5 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis corroded near anti roll bar mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis corroded near anti roll bar mount |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded OUTER SILL |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill area |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch area/seat belt mount |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheel arch / chassis leg |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill / rear arm |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill / rear arm |6.1.A.1| | 1 |
| Offside Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Hydraulic fluid leaking excessively calliper (8.4.1 (a) (i)) | 1 |
| Position lamp not working both front |4.2.1 |a|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch / strut mount (5.3.6 (a) (i)) | 1 |
| Central Rear Stop lamp has less than 50% of the light sources illuminating |1.2.1b| | 1 |
| Supplementary restraint system warning lamp indicates a fault airbag light on (7.1.6 (a)) | 1 |
| Rear reflector missing nearside/offside (4.8.2 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases centre pasted joint (6.1.2 (a)) | 1 |
| Front Anti-roll bar missing (5.3.3 (a) (ii)) | 1 |
| Offside Rear Rear fog lamp missing |1.3.2a| | 1 |
| Headlamp has a product on the light source so that the light output is severely reduced |4.1.4 |b|| | 1 |
| Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
| Power steering pipe|s| or hose|s| leaking RETURN PIPE |2.3.3b| | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill rusted through (7.1.1 (a) (i)) | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded holed (7.1.1 (a) (i)) | 1 |
| Central Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Front Outer Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg (6.1.1 (c) (ii)) | 1 |
| Offside Front Outer Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg (6.1.1 (c) (ii)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Rear Brake pedal does not operate a brake fitted to each wheel both rear brakes |3.3.A.3| | 1 |
| Brake pedal spongy excess travel in footbrake |3.3.B.1b| | 1 |
| Brake fluid warning lamp illuminated brake fluid below minimum |3.6.G.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis at anti roll bar mount |2.4.A.3| | 1 |
| Nearside Rear Braking system leaking caliper |3.6.A.1| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill panel. |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill panel. |5.3.6 |a| |i|| | 1 |
| Nearside Front Outer Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Offside Front Outer Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Nearside Upper Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Seat belt not functioning as intended (7.1.2 (c)) | 1 |
| Steering wheel has movement relative to the column indicating looseness |2.2.1 |a| |i|| | 1 |
| Electrical wiring insecure |1.9.2a| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced offside rear outer sill corroded excessivly (7.1.1 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases rear joint area (6.1.2 (a)) | 1 |
| Exhaust has a major leak of exhaust gases Catalyst removed. (6.1.2 (a)) | 1 |
| Centre Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Nearside Rear Inner Road wheel fractured (5.2.2 (a)) | 1 |
| Offside Service brake is causing the vehicle to swerve to the offside (1.2.1 (b) (i)) | 1 |
| Offside Front Anti-roll bar linkage insecure (2.4.G.1) | 1 |
| Nearside Rear Upper Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6| | 1 |
| Offside Rear Upper Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6| | 1 |
| Nearside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
| Nearside Headlamps matched pair are not the same colour |1.7.6| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill holed (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded outer sill
|2.4.A.3| | 1 |
| Rear Inner brake disc in such a condition that it is seriously weakened both |3.5.1i| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill before the nearside rear wheel |6.1.B.2| | 1 |
| Rear Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 1 |
| Headlamp not working on dipped beam both |4.1.1 |a| |ii|| | 1 |
| Direction indicator not working both nearside |4.4.1 |a| |ii|| | 1 |
| Offside Rear Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
| Offside Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance |1.3.2d| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting rivet missing |2.4.G.1| | 1 |
| Central Front Power steering pipe/hose leaking x2 |2.1.5 |a|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 1 |
| Rear Exhaust has a major leak of exhaust gases silencer flange (6.1.2 (a)) | 1 |
| Offside Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
| Offside Rear front brake juddering severely |3.7.A.2b| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases EGR union undone (6.1.2 (a)) | 1 |
| Offside Rear Suspension arm corroded and seriously weakened holed |2.4.G.1| | 1 |
| Nearside Rear Suspension arm corroded and seriously weakened holed |2.4.G.1| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch holed |6.1.B.2| | 1 |
| Nearside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Offside Front Lower Suspension arm corroded and seriously weakened holed (5.3.3 (b) (i)) | 1 |
| Nearside Rear Lower Suspension arm corroded and seriously weakened holed (5.3.3 (b) (i)) | 1 |
| Offside Rear Lower Suspension arm corroded and seriously weakened holed (5.3.3 (b) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Offside Front Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Emissions not tested exhaust blow |8.2.1.2 |d|| | 1 |
| Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Lower Ball joint has excessive play |2.2.B.1f| | 1 |
| Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floors holed both sides (6.2.2 (d) (i)) | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both inner sills (6.2.2 (d) (i)) | 1 |
| Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting both sides (6.2.2 (d) (i)) | 1 |
| Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Nearside Rear Anti-roll bar linkage ball joint likely to become detached detached linkage |5.3.4 |a| |ii|| | 1 |
| Emissions not tested MAJOR COOLANT LEAK (8.2.1.2 (d)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch corroded |6.1.1 |c| |i|| | 1 |
| Nearside Rear Rear passenger seat cannot be secured in the upright position. |6.2.3| | 1 |
| Rear Torsion bar corroded and seriously weakened (5.3.1 (b) (i)) | 1 |
| Nearside Rear Upper Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Upper Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Central Rear Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii)) | 1 |
| Emission control equipment obviously defective (8.2.2.1 (a)) | 1 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 1 |
| Offside Rear Upper Suspension arm pin or bush excessively worn outer bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Offside Front Steering locking device missing track rod end (2.1.3 (d)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corroded |6.1.B.2| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cill (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Central Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases box join |6.1.2 |a|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill section (5.3.6 (a) (i)) | 1 |
| Hydraulic fluid leaking excessively (8.4.1 (a) (i)) | 1 |
| Rear Brake disc significantly and obviously worn Both side`s |1.1.14 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded sills |2.4.A.3| | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded inner sill (2.1.2 (e) (i)) | 1 |
| Nearside Rear Steering component mounting prescribed area is excessively corroded outer sill (2.1.2 (e) (i)) | 1 |
| Nearside Front Steering component mounting prescribed area is excessively corroded inner sill (2.1.2 (e) (i)) | 1 |
| Nearside Rear Steering component mounting prescribed area is excessively corroded inner wheel arch (2.1.2 (e) (i)) | 1 |
| Offside Rear Axle beam cracked |2.5.A.5a| | 1 |
| Offside Rear Road wheel cracked |4.2.A.1a| | 1 |
| Offside Front Road wheel cracked |4.2.A.1a| | 1 |
| Nearside Rear Anti-roll bar linkage severely distorted |2.4.G.1| | 1 |
| Supplementary Restraint System warning lamp indicates a fault airbag light red |5.4.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill corroded (7.1.1 (a) (i)) | 1 |
| Nearside Front Headlamp aim beam image obviously incorrect unable to test beam until after new bulb fitted |1.8.A.1b| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside sill |6.1.B.2| | 1 |
| Offside Rear Integral body structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wing (6.1.1 (c) (ii)) | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wing (6.1.1 (c) (ii)) | 1 |
| Exhaust emissions likely to be affected by an induction leak (8.2.1.1 (b)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded HOLED /CORRODED |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg holed |2.4.A.3| | 1 |
| Offside Front Brake back plate|s| securing device excessively deteriorated |3.5.1j| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength boot floor |5.3.6 |a| |i|| | 1 |
| Nearside Front Road wheel more than one fixing missing (5.2.1 (a) (ii)) | 1 |
| Offside Front Road wheel more than one fixing missing (5.2.1 (a) (ii)) | 1 |
| Nearside Rear Road wheel more than one fixing missing (5.2.1 (a) (ii)) | 1 |
| Offside Rear Road wheel more than one fixing missing (5.2.1 (a) (ii)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits Exhaust blowing (8.2.1.2 (c)) | 1 |
| Front Position lamp adversely affected by the operation of another lamp nearside and offside (4.2.3 (c)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Emissions not tested vehicle has engine fault |7.3.A.1| | 1 |
| Rear Battery insecure and likely to cause a short circuit |4.13 |a| |ii|| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill
|2.4.A.3| | 1 |
| Offside Rear Upper Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Front Lower Anti-roll bar insecure |2.4.G.1| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top area (5.3.6 (a) (i)) | 1 |
| Nearside Front Power steering pipe|s| or hose|s| leaking |2.3.3b| | 1 |
| Nearside Front Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Lower Suspension arm attachment bracket/mounting insecure arm bolt loose |2.4.G.1| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner cill |5.2.6| | 1 |
| Brake disc significantly and obviously worn both front and rear discs. (1.1.14 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases back box and centre pipe joint (6.1.2 (a)) | 1 |
| Nearside Rear Steering component mounting prescribed area is excessively corroded lower seal (2.1.2 (e) (i)) | 1 |
| Offside Rear Parking brake inoperative on one side no effort (1.4.1 (a)) | 1 |
| Emissions not tested due to major leak of exhaust gases (8.2.1.2 (d)) | 1 |
| Offside Rear Body has a sharp edge caused by damage light lens |6.1.C.1| | 1 |
| Nearside Front Braking system leaking caliper |3.6.A.1| | 1 |
| Position lamp not working both front (4.2.1 (a) (ii)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area is inadequately repaired arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear inner sills (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis behind coil spring marked with yellow chalk (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting area (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor section (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor section (5.3.6 (a) (i)) | 1 |
| Offside Front Headlamp has a product on the lens so that the light output is severely reduced pattern |4.1.4 |b|| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Panhard rod has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Rear Panhard rod has excessive play in a ball joint |2.4.G.2| | 1 |
| Brake pipe leaking across rear axle |3.6.A.1| | 1 |
| Nearside Rear Service brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
| Rear Direction indicators not working |1.4.A.2c| | 1 |
| Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Upper Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Upper Steering locking device missing (2.1.3 (d)) | 1 |
| Nearside Front Lower Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Centre Exhaust has a major leak of exhaust gases emissions failed dew 2 blow |7.1.2| | 1 |
| Offside Rear Braking system leaking brake caliper leaKING |3.6.A.1| | 1 |
| Nearside Front Suspension arm attachment bracket/mounting insecure and impairing directional stability top arm (bolt loose) (5.3.3 (a) (ii)) | 1 |
| Offside Track rod end loose |2.2.B.1d| | 1 |
| Rear Lower Suspension arm corroded and seriously weakened both rear arms (5.3.3 (b) (i)) | 1 |
| Nearside Rear Road wheel fractured |5.2.2 |a|| | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill area (7.1.1 (a) (i)) | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill area (7.1.1 (a) (i)) | 1 |
| Nearside Rear Body component damaged and likely to cause injury light unit broken (6.2.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis at inner wing (5.3.6 (a) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outter sill corroded (7.1.1 (a) (i)) | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting fractured |5.3.3 |b| |ii|| | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (inside wheelarch area) Chassis rail corroded (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Offside Front Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) | 1 |
| Brake pipe at imminent risk of failure or fracture front to rear corroded at front and rear (1.1.11 (a)) | 1 |
| Brake pipe at imminent risk of failure or fracture o.s.r to n.s.r (1.1.11 (a)) | 1 |
| Offside Front Outer Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced middle of sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Service brake excessively binding wheel will not rotate freely |1.2.1 |f|| | 1 |
| Offside Front Service brake excessively binding wheel will not rotate freely |1.2.1 |f|| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded Sill panel |5.2.6| | 1 |
| Nearside Rear Anti-lock braking system wiring excessively damaged |3.4.3| | 1 |
| Nearside Inner Front Road wheel distorted |4.2.A.1a| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill as indidicated |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill as indicated |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings as indicated |6.1.B.2| | 1 |
| Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings as indicated |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength roll bar mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Lower Integral body structure modified such that structural rigidity is significantly reduced outer sill area (6.1.1 (d) (i)) | 1 |
| Offside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill area (6.1.1 (c) (i)) | 1 |
| Nearside Rear Torque/reaction arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Nearside Front Lower Suspension arm insecure |2.4.G.1| | 1 |
| Nearside Front Lower Suspension arm locating pin locking device missing |2.4.G.3b| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill x2 |5.2.6| | 1 |
| Nearside Front Subframe mounting prescribed area is inadequately repaired floor pan patch not welded on all sides |2.4.A.3| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Ns front inner sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Ns rear inner sill (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings beside top arms and suspension |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings beside top arms and suspension |6.1.B.2| | 1 |
| Offside Front Road wheel fractured (5.2.2 (a)) | 1 |
| Offside Rear Exhaust emissions Lambda reading after 2nd fast idle outside specified limits 1.028 |7.3.D.3| | 1 |
| Nearside Front Power steering pipe/hose leaking (2.1.5 (a)) | 1 |
| Offside Anti-roll bar linkage has excessive play in a pin/bush broken |2.4.G.2| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Front and rear outer sill corroded (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Front and rear outer sill corroded (6.1.1 (c) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill and inner arch |7.1.1 |a| |i|| | 1 |
| Nearside Front Stop lamp not working |1.2.1b| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced rear outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Upper Suspension arm corroded and seriously weakened holed / chalked (5.3.3 (b) (i)) | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 1 |
| Power steering pipe|s| or hose|s| excessively corroded X2 |2.3.2| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion Outer sill |6.1.C.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded rear of sill |5.2.6| | 1 |
| Power steering pipe|s| or hose|s| excessively corroded on rack |2.3.2| | 1 |
| Front Undertray likely to become detached |6.2.1 |a| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases middle section |7.1.2| | 1 |
| Offside Front Outer Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Nearside Front brake disc has restricted free movement |3.5.1j| | 1 |
| Nearside Front Suspension arm insecure |2.4.G.1| | 1 |
| Front Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg within 30cm of front lower arm mount. |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded marked in yellow |2.4.A.3| | 1 |
| Rear Exhaust has a major leak of exhaust gases back box |7.1.2| | 1 |
| Nearside Rear Anti-roll bar linkage damaged and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush d bush |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush d bush |2.4.G.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top mounting x2 holes (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top mounting x3 holes (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill to floor (7.1.1 (a) (i)) | 1 |
| Nearside Rear Upper Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 1 |
| Rear Anti-roll bar corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect bulb incorrectly fitted (4.1.2 (c)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced end of inner sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced outrigger holed (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced valance holed (7.1.1 (a) (i)) | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/floor |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/floor |6.1.B.2| | 1 |
| Offside Front Anti-roll bar linkage ball joint likely to become detached detached |5.3.4 |a| |ii|| | 1 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering legs |6.1.A.1| | 1 |
| Nearside Front Steering retaining device missing |2.2.C.1g| | 1 |
| Nearside Front Floor excessively deteriorated |6.2.4 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner cill / floor |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced innercill/floor |7.1.1 |a| |i|| | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced boot floor |6.1.1 |c| |i|| | 1 |
| Front Service brake lagging in operation |1.2.1 |d|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Rear Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
| Rear Exhaust has a major leak of exhaust gases silencer |6.1.2 |a|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill holed |6.2.2 |d| |i|| | 1 |
| Engine MIL inoperative or indicates a malfunction engine light illuminated |8.2.1.2 |h|| | 1 |
| Emissions not tested due to major exhaust leak |8.2.1.2 |d|| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Nearside Front Brake insecure BACK PLATE NOW REMOVED |1.1.21 |c|| | 1 |
| Nearside Front Anti-roll bar ball joint excessively worn ANTIROLL BAR LINK ROD |5.3.4 |a| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting NEARSIDE INNER AND OUTER SILL EXCESSIVLY CORRODED/HOLED AT REAR |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OUTER SILL EXCESSIVLY CORRODED/HOLED AT REAR |6.2.2 |d| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i|| | 1 |
| Offside Front Brake lining|s| insecure |3.5.1g| | 1 |
| Nearside Front Brake lining|s| insecure |3.5.1g| | 1 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced sill to floor |6.1.1 |a| |i|| | 1 |
| Offside Front Seat belt webbing significantly weakened (7.1.2 (b) (ii)) | 1 |
| Nearside Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 1 |
| Offside Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded seal corroded |5.2.6| | 1 |
| Offside Front Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 1 |
| Nearside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill as marked (6.1.1 (c) (i)) | 1 |
| Nearside Rear Anti-roll bar missing |2.4.G.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis holed |6.1.A.1| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting anti roll bar fastening (6.2.2 (d) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie |5.3.6 |a| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill section - visible in offside rear wheelarch (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill section (6.2.2 (d) (i)) | 1 |
| Nearside Headlamp aim beam image obviously incorrect BULB SEATED INCORRECTLY |1.8.A.1b| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Cill panel (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg though wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Brake pipe at imminent risk of failure or fracture front to rear |1.1.11 |a|| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Under seal (6.1.1 (c) (i)) | 1 |
| Headlamp aim beam image kick up to the offside NS and OS |1.8| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Outer sill area |5.2.6| | 1 |
| Exhaust has a major leak of exhaust gases rear silencer joint area |6.1.2 |a|| | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits due to exhaust blow |8.2.1.2 |c|| | 1 |
| Offside Drivers airbag missing (7.1.5 (a)) | 1 |
| Offside Front Brake hose excessively damaged rubbing on wheel and lower arm (1.1.12 (b) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases Front section of cat (6.1.2 (a)) | 1 |
| Nearside Rear An item not tested |Manual| | 1 |
| Offside Rear Sub-frame strengthening plate or fastening insecure Bolt snapped (6.1.1 (b) (i)) | 1 |
| Offside Rear Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Engine mounting excessively loose (6.1.8 (a) (ii)) | 1 |
| Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering along chassis rail under the wheelarch marked with yellow crayon |6.1.1 |c| |ii|| | 1 |
| Emissions not tested Battery went flat as emission test was started (8.2.1.2 (d)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill (5.3.6 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger |6.2.2 |d| |i|| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Offside Front Position lamp not working sidelight (4.2.1 (a) (ii)) | 1 |
| Nearside Headlamp lens seriously defective badly deteriorated (4.1.1 (b) (ii)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill corroded (6.1.1 (c) (i)) | 1 |
| Nearside Rear Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Rear Exhaust fumes entering cabin (6.1.2 (b) (i)) | 1 |
| Nearside Windscreen damaged and affecting the drivers view of the road (3.2 (a) (ii)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i)) | 1 |
| Offside brake caliper leaking |3.6.A.1| | 1 |
| Emissions not tested severe blow from exhaust rear silencer (8.2.1.2 (d)) | 1 |
| Exhaust has a major leak of exhaust gases exhaust rear silencer severe blow (6.1.2 (a)) | 1 |
| Nearside Direction indicator not working front & rear repeaters |4.4.1 |a| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower inner wing |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower inner wing |5.3.6 |a| |i|| | 1 |
| Nearside Rear Lower Suspension arm damaged and seriously weakened weld up cut open splits |5.3.3 |b| |i|| | 1 |
| Offside Rear Brake valve leaking such that brake functionality is affected (1.1.7 (d) (ii)) | 1 |
| Offside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Offside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Offside Outer Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
| Offside Rear rear brake recording little or no effort parking brake |3.7.B.5a| | 1 |
| Nearside Front Front position lamp|s| has a product on the lens so it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Front Front position lamp|s| has a product on the lens so it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Rear Outer Body has a projection caused by corrosion wheel arch |6.1.C.1| | 1 |
| Offside Rear Outer Body has a projection caused by corrosion wheel arch |6.1.C.1| | 1 |
| Rear Exhaust emits clearly visible black smoke during acceleration |7.3.A.2c| | 1 |
| Offside Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced n/s outter sill (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s front anti roll bar mount corroded (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension arm fractured |2.4.G.1| | 1 |
| Offside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting likely to become detached (5.3.3 (a) (ii)) | 1 |
| Offside Rear Anti-roll bar fractured (5.3.3 (b) (ii)) | 1 |
| Nearside Front Anti-lock braking system component inappropriately modified wire insecure |3.4.4| | 1 |
| Offside Front Anti-lock braking system component inappropriately modified wire insecure |3.4.4| | 1 |
| Offside Rear Wheel nut|s| missing two nuts nissing |4.2.A.1e| | 1 |
| Horn not working Button missing. Two wire exposed. (7.7 (a) (ii)) | 1 |
| Offside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Lower Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases rear pipe |6.1.2 |a|| | 1 |
| Offside Front Suspension component mounting prescribed area is fractured chassis |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 1 |
| Nearside Front Lower Suspension arm corroded and seriously weakened wishbone (5.3.3 (b) (i)) | 1 |
| Nearside Front Lower Suspension arm corroded and seriously weakened at shocker mount (5.3.3 (b) (i)) | 1 |
| Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt broken away |2.4.G.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings boot floor |6.1.B.2| | 1 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i)) | 1 |
| Central Outer Seat belt anchorage prescribed area is excessively corroded nearside sill |5.2.6| | 1 |
| Front Brake pipe leaking on a hydraulic braking system to rear |1.1.11 |b| |ii|| | 1 |
| Brake pedal anti-slip provision worn smooth |1.1.2 |c|| | 1 |
| Offside Rear Steering component mounting prescribed area is excessively corroded o/s/r floor/sill holed and corroded |2.1.2 |e| |i|| | 1 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Emissions not tested due to exhaust leak |7.3.A.1| | 1 |
| Central Rear Exhaust has a major leak of exhaust gases flanges corroded and leaking |7.1.2| | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced area center (7.1.1 (a) (i)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded |7.1.1 |a| |i|| | 1 |
| Fuel cap/sealing device ineffective |6.1.3 |b| |i|| | 1 |
| Stop lamp(s) not working all (4.3.1 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg - marked |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg - marked |2.4.A.3| | 1 |
| Rear Brake disc significantly and obviously worn Heavily corroded and weakened |1.1.14 |a| |i|| | 1 |
| Rear Service brake application uneven across the axle |3.7.D.2b| | 1 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Nearside Front Anti-roll bar ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Rear Anti-roll bar linkage insecurely attached |5.3.3 |a| |i|| | 1 |
| Offside Front Anti-roll bar linkage likely to become detached |5.3.3 |a| |ii|| | 1 |
| Offside Front Brake hose leaking on an air braking system |1.1.12 |c| |i|| | 1 |
| Rear Exhaust system insecure |6.1.2 |a|| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Seat belt anchorage prescribed area is fractured Center sill. |5.2.6| | 1 |
| Offside Outer Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| All position lamps not working |4.2.1 |a|| | 1 |
| Nearside Rear Suspension arm corroded and seriously weakened lower arm |2.4.G.1| | 1 |
| Nearside Rear Suspension arm insecure lower arm securing washers corroded away |2.4.G.1| | 1 |
| Offside Rear Lower Suspension arm insecure arm securing washers corroded away |2.4.G.1| | 1 |
| Nearside Front Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 1 |
| Emissions not tested rear tail pipe missing,exhaust blowing. |7.3.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis excessively corroded and holed. |2.4.A.3| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Central Seat belt anchorage prescribed area strength or continuity significantly reduced full length inner sill |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced central chassis leg |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced offside outer sill |7.1.1 |a| |i|| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch (6.2.2 (d) (i)) | 1 |
| Offside Rear Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 1 |
| Drivers airbag missing drivers (7.1.5 (a)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill. (7.1.1 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill corroded at rear suspension wishbone (5.3.6 (a) (i)) | 1 |
| Offside Rear Position lamp has a product on the lens or light source which shows white light to the rear lamp broken (4.2.3 (b) (ii)) | 1 |
| Central Valve stem seriously damaged all four |5.2.3 |j|| | 1 |
| Nearside Front Seat belt anchorage loose buckle |7.1.1 |b|| | 1 |
| Nearside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced central inner sill/ floor pan corroded, seat belt /base mounting area. (7.1.1 (a) (i)) | 1 |
| Central Exhaust has a major leak of exhaust gases silencer (6.1.2 (a)) | 1 |
| Rear Exhaust system insecure silencer (6.1.2 (a)) | 1 |
| Seat belt anchorage prescribed area is excessively corroded both rear outer sills |5.2.6| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet top chassis leg (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch chassis leg (6.1.1 (c) (i)) | 1 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Offside Rear Coil spring fractured or broken snapped at the top (5.3.1 (b) (i)) | 1 |
| Front Anti-roll bar insecurely attached both brackets have sheared bolts |5.3.3 |a| |i|| | 1 |
| Rear brake disc modified and seriously weakened |3.5.1n| | 1 |
| Rear Exhaust has a major leak of exhaust gases silencer (6.1.2 (a)) | 1 |
| Offside Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill chalked (7.1.1 (a) (i)) | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill chalked (7.1.1 (a) (i)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill chalked (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill chalked (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected ANTI ROLL BAR MOUNTING CHASSIS CORROSION. |5.3.6 |a| |ii|| | 1 |
| Centre Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Rear Parking brake inoperative on one side INOPERATIVE ON BOTH REAR CALIPERS (1.4.1 (a)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits FAILED ON CO AND LAMBDA (8.2.1.2 (b)) | 1 |
| Nearside Rear Bumper damaged and likely to cause injury when grazed or contacted |6.1.4 |a| |i|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Braking system leaking front to rear metal brake pipe |3.6.A.1| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Rear of inner sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded Outer sill area |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded Centre of outer sill area |5.2.6| | 1 |
| Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Central Exhaust has a major leak of exhaust gases middle pipe snapped (6.1.2 (a)) | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a ball joint snapped |2.4.G.2| | 1 |
| Central Rear Exhaust emissions likely to be affected by an exhaust leak |8.2.1.1 |b|| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced nearside rear outer sill section (6.1.1 (c) (i)) | 1 |
| Offside Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill (6.2.2 (d) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting chassis leg (6.2.2 (d) (i)) | 1 |
| Brake pipe leaking on a hydraulic braking system front rear (1.1.11 (b) (ii)) | 1 |
| Brake performance not tested brake pipe failed (1.2.1 (g)) | 1 |
| Nearside Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) | 1 |
| Nearside Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti-roll bar mounting area, wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chsiis around arb mount |2.4.A.3| | 1 |
| Offside Rear position lamp|s| not in a clean condition and function impaired |1.1.4a| | 1 |
| Rear Exhaust has a major leak of exhaust gases to mddle joint (6.1.2 (a)) | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i)) | 1 |
| Nearside Headlamp has a product on the lens so that the light output is severely reduced no beam image (4.1.4 (b)) | 1 |
| Offside Headlamp has a product on the lens so that the light output is severely reduced no beam image (4.1.4 (b)) | 1 |
| Steering system excessively rough |2.2.D.1| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Chassis leg |2.4.A.3| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage attachment bracket/mounting likely to fail (5.3.3 (b) (ii)) | 1 |
| Offside Rear Body has a sharp edge caused by damage Lens broken, sharp egde. |6.1.C.1| | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
| Nearside Rear Integral body structure has excessive corrosion which adversely affects braking or steering Outer sill |6.1.1 |c| |ii|| | 1 |
| Offside Rear Anti-roll bar damaged and seriously weakened (5.3.3 (b) (i)) | 1 |
| Nearside Front Suspension component pin or bush excessively worn shock absorber |5.3.4 |a| |i|| | 1 |
| Offside Front Suspension component pin or bush excessively worn shock absorber |5.3.4 |a| |i|| | 1 |
| Front Steering wheel rim loose (2.2.1 (c) (i)) | 1 |
| Offside Front Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Front chassis/inner wing |2.4.A.3| | 1 |
| Offside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm ball joint likely to become detached Nut rusted away (5.3.4 (a) (ii)) | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill floor |7.1.1 |a| |i|| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near spring |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheelarch |5.3.6 |a| |i|| | 1 |
| Offside Front Brake hose excessively damaged |3.6.B.4d| | 1 |
| Offside Front Seat belt damaged (7.1.2 (b) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced at inner sill x 3 holes and arch (7.1.1 (a) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced at sill and arch (7.1.1 (a) (i)) | 1 |
| Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at shock mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at out rigger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Upper Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Offside Rear Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 1 |
| Headlamp lens seriously defective both lenses hazy (4.1.1 (b) (ii)) | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Wheel arch |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Headlamp incorrect colour (4.1.4 (a)) | 1 |
| Exhaust has a major leak of exhaust gases REAR JOINING PIECE PLUS JOINING PIECE AFTER CATALYST |6.1.2 |a|| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill rear section |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill rear section |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor section |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor/inner sill section |7.1.1 |a| |i|| | 1 |
| Rear Exhaust has a major leak of exhaust gases silencer section |6.1.2 |a|| | 1 |
| Offside Rear brake disc has restricted free movement |3.5.1j| | 1 |
| Rear brake disc insecure |3.5.1i| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill holed |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor |6.1.B.2| | 1 |
| Offside Front Suspension arm corroded and seriously weakened Arm holed |2.4.G.1| | 1 |
| Offside Rear Suspension arm worn and seriously weakened |2.4.G.1| | 1 |
| Nearside Front Macpherson strut insecure Bolts loose |2.4.G.1| | 1 |
| Nearside Front Seat belt anchorage likely to become detached in the event of a collision floor holed |7.1.1 |a| |ii|| | 1 |
| Offside Front Seat belt anchorage likely to become detached in the event of a collision floor holed |7.1.1 |a| |ii|| | 1 |
| Body panel corroded and likely to cause injury all wheel arches (6.2.1 (a) (i)) | 1 |
| Offside Front Body panel insecure wing (6.2.1 (a) (i)) | 1 |
| Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength both sides lower (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting areas (5.3.6 (a) (i)) | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Front Seat belt anchorage prescribed area strength or continuity significantly reduced both sides (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is severely distorted |5.2.6| | 1 |
| Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Centre Braking system leaking |3.6.A.1| | 1 |
| Rear Rear fog lamp switch missing (4.5.3 (a)) | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings flitch |6.1.B.2| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Offside Outer Rear brake disc excessively pitted |3.5.1h| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings marked with chalk |near towing eye| |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |marked with chalk| |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |marked with chalk| |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |marked with chalk| |6.1.B.2| | 1 |
| Offside Front Service brake excessively binding unable to rotate freely (1.2.1 (f)) | 1 |
| Nearside Front Anti-roll bar linkage insecure and impairing directional stability detached/broken (5.3.3 (a) (ii)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits due to exhaust leak (8.2.1.2 (c)) | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch ,close to seat belt mounting area (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis near subframe mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis near subframe mounting (5.3.6 (a) (i)) | 1 |
| Offside front brake recording little or no effort |3.7.B.5a| | 1 |
| Front Anti-roll bar linkage has excessive play in a ball joint both |2.4.G.2| | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced CHASSIS LEG |6.1.1 |a| |i|| | 1 |
| Offside Front Inner Vehicle structure is fractured and structural rigidity is significantly reduced SILL |6.1.1 |a| |i|| | 1 |
| Nearside Outer Vehicle structure is fractured and structural rigidity is significantly reduced SILL |6.1.1 |a| |i|| | 1 |
| Offside Front Anti-roll bar linkage has excessive play in a ball joint link snapped |2.4.G.2| | 1 |
| Offside Front Tie bar/rod synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Rear fog lamp not working |1.3.2b| | 1 |
| Centre Exhaust system not adequately supported INSECURE |7.1.1| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bush broken |2.4.G.2| | 1 |
| Nearside Rear front brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Rear front brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner wing |5.2.6| | 1 |
| Offside Front Anti-roll bar linkage synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Offside Rear Body component corroded and likely to cause injury (6.2.1 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Rear Fuel system component leaking |7.2.3| | 1 |
| Nearside Front Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Nearside Rear Suspension arm cracked |2.4.G.1| | 1 |
| Nearside Rear Shock absorber insecure |2.7.2b| | 1 |
| Nearside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Front Headlamp are incorrectly positioned |4.1.4 |a|| | 1 |
| Nearside Front Headlamp aim not tested |4.1.2 |b|| | 1 |
| Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Offside Front Service brake grabbing severely |1.2.1 |c|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill rotten (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill rotten (7.1.1 (a) (i)) | 1 |
| Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt insecure (2.1.3 (g) (ii)) | 1 |
| Front Direction indicators not working |1.4.A.2c| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 1 |
| Nearside Rear Upper Suspension arm corroded and seriously weakened holed and corroded |5.3.3 |b| |i|| | 1 |
| Nearside Rear Lower Suspension arm corroded and seriously weakened holed and corroded |5.3.3 |b| |i|| | 1 |
| Offside Rear Lower Suspension arm corroded and seriously weakened holed and corroded |5.3.3 |b| |i|| | 1 |
| Offside Rear Service brake excessively fluctuating disc corroded |1.2.1 |e|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill holed and corroded |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill holed and corroded |7.1.1 |a| |i|| | 1 |
| Offside Front Upper coil spring broken |2.4.C.1a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chases leg in parts |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded sill inner and outer |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch/boot floor |2.4.A.3| | 1 |
| Brake performance not tested due to corroded and weakened suspension arm (1.2.1 (g)) | 1 |
| Nearside Front Body panel insecure wing (6.2.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis between subframe mount and anti-roll bar mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis between subframe mount and anti-roll bar mount |2.4.A.3| | 1 |
| Offside Front Body insecure and dangerous to other road users Lower wing at drivers door |6.1.B.1b| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Rear Brake pipe connection leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 1 |
| Offside Front Power steering ram|s| leaking from a failed component |2.3.3b| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to sub-frame mounting |6.1.B.2| | 1 |
| Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded flitch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded boot floor |2.4.A.3| | 1 |
| Offside Rear Lower Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Front position lamp|s| not working o/s & n/s |1.1.A.3b| | 1 |
| Offside Rear Outer Anti-roll bar attachment bracket/mounting insecure broken from lower arm |2.4.G.1| | 1 |
| Offside Rear Anti-roll bar linkage insecure and impairing directional stability drop link detached |5.3.3 |a| |ii|| | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail |5.3.6 |a| |i|| | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength large hole (5.3.6 (a) (i)) | 1 |
| Front Drivers view of the road through the swept area of the windscreen materially affected by an obstruction (3.1 (a) (ii)) | 1 |
| Battery insecure and likely to fall from carrier carrier/boot floor corroded away (4.13 (a) (ii)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Outer section of chassis rail marked with chalk (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Outer section of chassis rail marked with chalk (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired boot floor chalked (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage likely to become detached in the event of a collision inner sill (7.1.1 (a) (ii)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength behind wheel marked with chalk (5.3.6 (a) (i)) | 1 |
| Power steering pipe/hose damaged such that the steering is adversely affected (2.1.5 (g) (ii)) | 1 |
| Offside Front Seat belt buckle not functioning as intended (7.1.2 (d)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced center inner ill (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Body panel corroded and likely to cause injury rear quarter (6.2.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis anti roll bar mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis anti roll bar mount |2.4.A.3| | 1 |
| Offside Front Brake pipe kinked |3.6.B.2b| | 1 |
| Offside Front Anti-roll bar synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Anti-roll bar linkage insecure broken |2.4.G.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis under arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis under arch |2.4.A.3| | 1 |
| Rear Vehicle Identification Number not displayed |0.2 |a|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced jacking point |7.1.1 |a| |i|| | 1 |
| Power steering ram|s| leaking from a failed component |2.3.3b| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top arm mount and anti roll bar mount |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mount |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Rear Lower Suspension arm inappropriately repaired |2.4.A.2| | 1 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2) | 1 |
| Offside Front Anti-roll bar linkage fractured broken (2.4.G.1) | 1 |
| Nearside Front coil spring broken (2.4.C.1a) | 1 |
| Offside Front Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Rear coil spring broken (2.4.C.1a) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill inner to outer |5.3.6 |a| |ii|| | 1 |
| Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected both front chassis legs |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Trailing arm corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Nearside Front Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases joint center/rear |7.1.2| | 1 |
| Nearside Front brake caliper securing device loose |3.5.1j| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill area |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill area |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Chassis/Brake pipe |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Rear Upper Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Rear Lower Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Upper Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Lower Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Exhaust has a major leak of exhaust gases center pipe broke at the join just before the silencer |7.1.2| | 1 |
| Nearside Rear Coil spring not correctly located |2.4.C.2| | 1 |
| Offside Front Anti-lock braking system wiring excessively damaged |3.4.3| | 1 |
| Offside Rear Macpherson strut corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Front Macpherson strut corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Front Macpherson strut corroded and seriously weakened |2.4.G.1| | 1 |
| Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Coil spring fractured or broken and nearside rear (5.3.1 (b) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at inner wing |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced at inner wing |6.1.1 |c| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area holed |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area holed |7.1.1 |a| |i|| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner undersill and floor pan (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner undersill and floor pan (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg |5.3.6 |a| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Offside Rear Brake hose leaking at the caliper |3.6.A.1| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Tie bar/rod worn and seriously weakened |2.4.G.1| | 1 |
| Central Rear Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg under wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg under wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Inner Front Braking system leaking |3.6.A.1| | 1 |
| Nearside Front Power steering component|s| leaking |2.3.3b| | 1 |
| Electrical wiring damaged and bare connector exposed |1.9.2c| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch under bonnet |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded floor to sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded floor to sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Central Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Front Anti-roll bar linkage fractured |2.4.G.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings beside anti roll bar |6.1.B.2| | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill panel. (7.1.1 (a) (i)) | 1 |
| Nearside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced suspension arm (6.1.1 (c) (i)) | 1 |
| Offside Rear Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced suspension arm (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill and floor (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front and rear inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Lower Suspension component ball joint likely to become detached No split pin fitted (5.3.4 (a) (ii)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Floor to sill holed (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Floor to sill corroded and holed (6.2.2 (d) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded mounting at inner/outer sill box section |5.2.6| | 1 |
| Nearside Front Front suspension has excessive play in a lower suspension ball joint bottom ball joint |2.5.B.1a| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassie rail |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassie rail |2.4.A.3| | 1 |
| Offside rear brake grabbing severely |3.7.A.5b| | 1 |
| Offside Steering locking device missing |2.2.C.1g| | 1 |
| Rear All position lamps adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
| Emissions not tested Car keeps cutting out (8.2.1.2 (d)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced rear inner arch rotten through (7.1.1 (a) (i)) | 1 |
| Front Drivers airbag missing (7.1.5 (a)) | 1 |
| Central Exhaust has a major leak of exhaust gases Sleeve joint (6.1.2 (a)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits 1.409 (8.2.1.2 (c)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits 4.70 (8.2.1.2 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis split and corroded (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis split and corroded (5.3.6 (a) (i)) | 1 |
| Offside Outer Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Lower Braking system leaking |3.6.A.1| | 1 |
| Front Brake pedal creeps down when held under pressure |3.3.B.1a| | 1 |
| Nearside Front Lower Macpherson strut pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Front Lower Macpherson strut pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Front Upper Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Front Anti-roll bar damaged and seriously weakened |2.4.G.1| | 1 |
| Rear Exhaust has a major leak of exhaust gases box |6.1.2 |a|| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer`s specified limits 0.30max 0.48 |8.2.1.2 |a|| | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits 1.030 max 1.473 |8.2.1.2 |c|| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive emission too high engine management light is on indicating a fault |7.3.D.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded rear of outer sill |5.2.6| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Seat belt mount (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front All position lamps not working Sidelight |4.2.1 |a|| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/floor |7.1.1 |a| |i|| | 1 |
| Nearside Rear Outer Seat belt anchorage likely to become detached in the event of a collision sill |7.1.1 |a| |ii|| | 1 |
| Offside Front Front suspension retaining device missing top ball joint |2.5.A.4| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill (7.1.1 (a) (i)) | 1 |
| Centre Stop lamp obscured more than 50% |1.2.1c| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced rear outer sill |7.1.1 |a| |i|| | 1 |
| Rear fog lamp obviously incorrectly positioned (4.5.4 (a)) | 1 |
| Rear Service brake excessively binding both (1.2.1 (f)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded center floor |5.2.6| | 1 |
| Nearside Rear Service brake lagging in operation |1.2.1 |d|| | 1 |
| Headlamp aim beam image kick up to the offside both |1.8| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outter sill |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired full of body filler |5.2.6| | 1 |
| Rear Lower Rear fog lamp not working |1.3.2b| | 1 |
| Parking brake lever is impeded in its travel |3.1.6c| | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch |6.1.B.2| | 1 |
| Front Position lamp not working Both fronts inop (4.2.1 (a) (ii)) | 1 |
| Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt All front and rears (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Drive shaft securing bolt loose (6.1.7 (a) (i)) | 1 |
| Offside Rear Drive shaft securing bolt loose (6.1.7 (a) (i)) | 1 |
| Nearside Rear Sub-frame attachment bracket/mounting insecure |5.3.3 |a| |i|| | 1 |
| Offside Rear Sub-frame attachment bracket/mounting insecure |5.3.3 |a| |i|| | 1 |
| Nearside Stop lamp|s| showing white light to the rear |4.3.3 |a| |ii|| | 1 |
| Emissions not tested |8.2.2.2 |e|| | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill, inner arch at front edge, outer 1/4 panel (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill, inner arch at front edge, outer 1/4 panel (7.1.1 (a) (i)) | 1 |
| Nearside Front Lower Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Rear Exhaust has a major leak of exhaust gases Exhaust tailpipe all but broken off (6.1.2 (a)) | 1 |
| Brake performance not tested Vehicle will no longer start and run so brake test not possible (1.2.1 (g)) | 1 |
| Rear Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill spot welded across bottom seam (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill spot welded across bottom seam (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area is excessively corroded nearside outer body sill at rear area |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside outer body sill at rear area |5.2.6| | 1 |
| Brake lever has insufficient reserve travel Handbrake (1.1.2 (a)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength BOTH FRONT CHASSIS (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength between subframe and anti roll bar mountings (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength between subframe and anti roll bar mountings (5.3.6 (a) (i)) | 1 |
| Offside Brake pipe leaking on a hydraulic braking system front to rear brake pipe corroded through (1.1.11 (b) (ii)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak exhaust blow at rear (8.2.1.1 (b)) | 1 |
| Nearside Front Power steering pipe|s| or hose|s| inappropriately repaired |2.3.7| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Nearside Front Service brake excessively binding unable to check wheel bearing (1.2.1 (f)) | 1 |
| Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength near wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength near wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength near wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
| Offside Front Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded Inner sill |5.2.6| | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6| | 1 |
| Nearside Rear Upper Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6| | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area is inadequately repaired Outer sill, plate non continuous weld |5.2.6| | 1 |
| Offside Rear Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
| Nearside Direction indicator incorrect colour side repeater (4.4.3 (a)) | 1 |
| Offside Direction indicator incorrect colour side repeater (4.4.3 (a)) | 1 |
| Offside Rear Parking brake efficiency below requirements rear o/s handbrake showing low effort (1.4.2 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front o/s chassis [under inner wing ] corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front lower o/s chassis corroded (6.1.1 (c) (i)) | 1 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear o/s outer sill corroded (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear o/s inner sill corroded (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear n/s inner sill corroded (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear n/s outer sill corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg, inside wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Brake cable has restricted free movement |3.5.1k| | 1 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/f chassis |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s/f inner wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg x2 (5.3.6 (a) (i)) | 1 |
| Nearside Front Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced marked with yellow chalk (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded Sill |marked yellow chalk| |5.2.6| | 1 |
| Rear coil spring fractured |2.4.C.1a| | 1 |
| Nearside Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings corrode at rear sill inner |6.1.B.2| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front to rear badly corroded |6.1.B.2| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and outer sill corroeded |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL |5.3.6 |a| |i|| | 1 |
| Nearside Rear Upper Exhaust has a major leak of exhaust gases back box |7.1.2| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Exhaust has a major leak of exhaust gases rear joint corroded/leaking (6.1.2 (a)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Offside Headlamp has a product on the light source so that the light output is severely reduced |4.1.4 |b|| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced broken away |2.4.G.1| | 1 |
| Offside Rear Lower Suspension arm corroded and seriously weakened broken away |2.4.G.1| | 1 |
| Nearside Front Brake performance not tested nearside front brake not tested due to pad missing and binding |3.7.A.1| | 1 |
| Exhaust has a major leak of exhaust gases rear to middle joint |7.1.2| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear outer sill |7.1.1 |a| |i|| | 1 |
| Rear Vehicle structure inadequately repaired such that structural rigidity is significantly reduced both sides rear (6.1.1 (d) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Panel inside o/s rear wheel arch - marked. (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer cill corroded and holed |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer cill corroded and holed |5.2.6| | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced INNER END SILL (7.1.1 (a) (i)) | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced INNER END SILL (7.1.1 (a) (i)) | 1 |
| Offside Front Anti-roll bar rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside front chassis by anti roll bar mount |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside front chassis by anti roll bar mount |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded nearside rear outer sill |5.2.6| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i)) | 1 |
| Central Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Nearside Rear coil spring broken upper most coil |2.4.C.1a| | 1 |
| Nearside Rear Anti-roll bar linkage insecurely attached |5.3.3 |a| |i|| | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded sill area |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded at inner sill |5.2.6| | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded at outer sill |5.2.6| | 1 |
| Nearside rear brake grabbing severely |3.7.A.5b| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced X2 (7.1.1 (a) (i)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both sills |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases middle and rear silencers |6.1.2 |a|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering Offside outer sill |6.1.A.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassi |2.4.A.3| | 1 |
| Rear Exhaust has a major leak of exhaust gases Box |7.1.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded Outersill |5.2.6| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 1 |
| Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Front Exhaust has a major leak of exhaust gases egr pipe broken |7.1.2| | 1 |
| Nearside Front Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis corroded and holed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded Sill rusted through alongside previous repair patch |5.2.6| | 1 |
| Front Anti-roll bar corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill center |7.1.1 |a| |i|| | 1 |
| brake disc in such a condition that it is seriously weakened rear discs |3.5.1i| | 1 |
| Electronic stability system warning lamp indicates a fault light stay |3.4.1c| | 1 |
| Seat belt locking mechanism does not secure or release both sides front not releasing under load |5.2.5a| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i|| | 1 |
| Nearside rear brakes release unevenly |3.7.B.4| | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Nearside Rear Braking system leaking caliper (1.1.3 (d)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chass |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassi |2.4.A.3| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded outer |5.2.6| | 1 |
| Nearside Front Shock absorbers insecurely attached |5.3.2 |a| |i|| | 1 |
| Offside Front Shock absorbers insecurely attached |5.3.2 |a| |i|| | 1 |
| Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Rear Lower Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower sill |6.1.B.2| | 1 |
| Front Brake hose connection leaking on a hydraulic braking system both sides flexi hose to caliper |1.1.12 |c| |ii|| | 1 |
| Central Lower Exhaust system insecure |6.1.2 |a|| | 1 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg as marked both sides (6.1.1 (c) (ii)) | 1 |
| Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill inner both sides as marked (6.1.1 (c) (i)) | 1 |
| Front Anti-roll bar linkage has excessive play in a ball joint o/s not attached |2.4.G.2| | 1 |
| Driver`s airbag missing after market steering wheel fitted |5.4.1| | 1 |
| Offside Front Seat belt damaged |7.1.2 |b| |i|| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both off side and near side |6.1.B.2| | 1 |
| Nearside Front Lower Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Emissions not tested due to engine cutting out failure to restart |7.4.B.1| | 1 |
| Nearside Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded floor to sill |5.2.6| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded floor to sill |2.4.A.3| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion Outer sill |6.1.C.1| | 1 |
| Emissions not tested Very high lamba and co high |7.3.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outersill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outersill |2.4.A.3| | 1 |
| Offside Front Headlamp adversely affected by the operation of another lamp |1.7.5c| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis in wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail in wheel arch |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill section |5.2.6| | 1 |
| Rear Exhaust has a major leak of exhaust gases box missing |7.1.2| | 1 |
| Offside Rear Inner Drive shaft securing bolt missing 2 nuts missing from drive shaft |6.1.7 |a| |i|| | 1 |
| Offside Front Anti-roll bar ball joint likely to become detached already broken |5.3.4 |a| |ii|| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis legs |2.4.A.3| | 1 |
| Nearside Rear Parking |secondary brake| on a single line braking system has no recorded effort at a wheel |1.3.1 |a| |ii|| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded/filled with filler (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 1 |
| Nearside Rear Anti-roll bar linkage ball joint excessively worn Rear detached at top (5.3.4 (a) (i)) | 1 |
| Direction indicator not working all front and rear |4.4.1 |a| |ii|| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg |6.1.A.1| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg |6.1.A.1| | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting nut missing |2.4.G.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch end of sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired Inner sill |7.1.1 |a| |i|| | 1 |
| Offside Front Lower Suspension arm likely to fail Strut mount fractured |5.3.3 |b| |ii|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded rear sill to floor holed and corroded |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded centre floor to sill holed and corroded near seat mount and seat belt mounting |5.2.6| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength upper wishbone area |5.3.6 |a| |i|| | 1 |
| Stop lamp not working centre |1.2.1b| | 1 |
| Exhaust has a major leak of exhaust gases centre |7.1.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Position lamp not working side (done) (4.2.1 (a) (ii)) | 1 |
| Offside Front Anti-roll bar linkage insecure not attached at top fitment |2.4.G.1| | 1 |
| Offside Rear Inner Battery insecure and likely to cause a short circuit boot (4.13 (a) (ii)) | 1 |
| Nearside Front Front suspension has excessive movement at a suspension ball joint |2.5.A.1c| | 1 |
| Headlamp aim not tested |4.1.2 |b|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill section. |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill/ arch (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i)) | 1 |
| Stop lamp(s) all not working both sides not working (4.3.1 (a) (iii)) | 1 |
| Central Rear Exhaust emissions likely to be affected by an exhaust leak has slight leak at clamp (8.2.1.1 (b)) | 1 |
| Emissions not tested likely to be affected by exhaust leak (8.2.1.2 (d)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill box (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill box (5.3.6 (a) (i)) | 1 |
| Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction |3.1 |a| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases also lambda sensor not plugged in (6.1.2 (a)) | 1 |
| Offside Front Braking system leaking brake caliper |3.6.A.1| | 1 |
| Nearside Rear brake disc modified and seriously weakened brake burning |3.5.1n| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer`s specified limits 0.31% |8.2.1.2 |a|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded body sill |5.2.6| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Floor (7.1.1 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage has excessive play in a ball joint Broken |2.4.G.2| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill /floor |5.2.6| | 1 |
| Front Windscreen wiper control is inaccessible to the driver |8.2.1a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded wishbone mounting |2.4.A.3| | 1 |
| Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 1 |
| Brake pipe at imminent risk of failure or fracture |1.1.11 |a|| | 1 |
| Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired |6.2.2 |d| |ii|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor to bottom of inner arch |5.2.6| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front and center floor panels corroded |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor panel corroded |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Anti-roll bar linkage fractured |5.3.3 |b| |ii|| | 1 |
| Offside Front Upper Seat belt installation anchorage insecure (10.1 (d)) | 1 |
| Offside Seat belt installation anchorage insecure (10.1 (d)) | 1 |
| Nearside Rear Body component damaged and likely to cause injury sharp edge (6.2.1 (a) (i)) | 1 |
| Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Rear Body panel corroded and likely to cause injury WHEEL ARCH |6.2.1 |a| |i|| | 1 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area |6.1.1 |c| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside front chassis leg (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside front chassis leg (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases rear joint (6.1.2 (a)) | 1 |
| Suspension component mounting prescribed area is excessively corroded offside front chassis leg |2.4.A.3| | 1 |
| Offside Rear Braking system leaking brake calyper |3.6.A.1| | 1 |
| Nearside Front Steering component mounting prescribed area is excessively damaged |2.1.2 |e| |i|| | 1 |
| Nearside Headlamp not working on dipped beam Poor connection |1.7.5a| | 1 |
| Offside Rear fog lamp does not emit a steady red light (1.3.2e) | 1 |
| Rear Rear fog lamp emits a light other than red (1.3.2e) | 1 |
| Offside Rear coil spring broken (2.4.C.1a) | 1 |
| Centre Stop lamp not working (1.2.1b) | 1 |
| Parking brake lever has no reserve travel (3.1.6b) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6) | 1 |
| Offside Rear fog lamp emits a light other than red (1.3.2e) | 1 |
| Power steering pipe|s| or hose|s| fouling other parts of the vehicle |2.3.2| | 1 |
| Nearside Front Lower Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases various places |7.1.2| | 1 |
| Offside Front Brake pipe leaking on a hydraulic braking system - rear (1.1.11 (b) (ii)) | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced Chassis leg |2.4.G.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chasiss |6.1.A.1| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill to wheel arch |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch/chassis rail |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded floor/rail |2.4.A.3| | 1 |
| Offside Front Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 1 |
| Rear front parking brake recording little or no effort |3.7.B.6a| | 1 |
| Front Headlamp aim not tested |1.8.A.1c| | 1 |
| Offside Front Floor excessively deteriorated floor to inner sill |6.2.4 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded sil |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outter sill |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outter sill |5.2.6| | 1 |
| Nearside Rear Suspension arm insecurely attached |5.3.3 |a| |i|| | 1 |
| Offside Rear Suspension arm insecurely attached |5.3.3 |a| |i|| | 1 |
| Offside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Offside Rear reflector not red in colour |1.5.1d| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area |7.1.1 |a| |i|| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area |7.1.1 |a| |i|| | 1 |
| Emissions not tested engine stalled |8.2.1.2 |d|| | 1 |
| Nearside Rear Exhaust has a major leak of exhaust gases centre pipe blowing |6.1.2 |a|| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded SILL |5.2.6| | 1 |
| Subframe mounting prescribed area is excessively corroded Both rear sill panels |2.4.A.3| | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sills |6.1.B.2| | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sills |6.1.B.2| | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Upper Coil spring fractured or broken Broken (5.3.1 (b) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 1 |
| Offside Front Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 1 |
| Nearside Rear Service brake lagging in operation (1.2.1 (d)) | 1 |
| Offside Rear fog lamp does not emit a steady red light |1.3.2e| | 1 |
| Offside Front Front position lamp|s| not working side light |1.1.A.3b| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Antiroll bar and suspension arm mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Antiroll bar and suspension arm mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Brake disc fractured |1.1.14 |a| |ii|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Nearside Front Shock absorbers has an excessively worn bush |5.3.2 |c|| | 1 |
| Offside Front Shock absorbers has an excessively worn bush |5.3.2 |c|| | 1 |
| Nearside Front Upper Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
| Offside Front Upper Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
| Power steering pipe|s| or hose|s| leaking power steering leak |2.3.3b| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sill (7.1.1 (a) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases box (6.1.2 (a)) | 1 |
| Offside Rear Road wheel fixing loose |5.2.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded floor to sill |5.2.6| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail corroded through (holed) less than 10 cm of suspension mount (6.2.2 (d) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill in mounting areas (5.3.6 (a) (i)) | 1 |
| Nearside Rear Hydraulic brake calliper inadequately mounted and braking performance affected |1.1.16 |c| |ii|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassi leg |6.1.B.2| | 1 |
| Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid |1.1.16 |b| |i|| | 1 |
| Offside Rear Body component corroded and likely to cause injury battery compartment corroded |6.2.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner sill / floor area |2.4.A.3| | 1 |
| Front Service brake imbalanced across an axle IMBALANCE OF 30% |1.2.1 |b| |i|| | 1 |
| Brake performance not tested pipe burst (1.2.1 (g)) | 1 |
| Offside Rear Brake pipe leaking on an air braking system (1.1.11 (b) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill/lower arch area.. |5.2.6| | 1 |
| Fuel cap/sealing device mounting flange/sealing method defective (7.2.4c) | 1 |
| Fuel cap/sealing device sealing washer missing (7.2.4c) | 1 |
| Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Both outer sills (7.1.1 (a) (i)) | 1 |
| Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| rear brakes release unevenly nsr brake recording little / no effort |3.7.B.4| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering CORRODED NEAR ANTI ROLL BAR MOUNTING (6.1.1 (c) (ii)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced JACKING POINT CORRODED (6.1.1 (c) (i)) | 1 |
| Nearside Front Brake drum back plate insecure BRAKE DISCS BACKING PLATE CORRODED AND INSECURE (1.1.14 (d)) | 1 |
| Offside Front Brake drum back plate insecure BRAKE DISCS BACKING PLATE CORRODED AND INSECURE (1.1.14 (d)) | 1 |
| Brake pedal anti-slip provision worn smooth rubber worn through to metal |3.3.A.1b| | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded under sill weakened stucture |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded sill end seam section |5.2.6| | 1 |
| Exhaust emissions exceed manufacturer`s specified limit |8.2.2.2 |a|| | 1 |
| Front passenger door cannot be opened from inside the vehicle (6.2.3 (a)) | 1 |
| Front passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Inner Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis in front of wheel (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis in front of wheel (6.1.1 (c) (i)) | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting insecure rod dropped off ball |2.4.G.1| | 1 |
| Nearside Rear Braking system leaking Brake Caliper |3.6.A.1| | 1 |
| Rear Exhaust emissions likely to be affected by an exhaust leak exhaust not connected |8.2.1.1 |b|| | 1 |
| Nearside Outer Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis |6.2.2 |d| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded OUTER SILL CORRODED |5.2.6| | 1 |
| Central Exhaust emissions likely to be affected by an exhaust leak |8.2.2.1 |b|| | 1 |
| Nearside Front Anti-lock braking system component missing |3.4.2| | 1 |
| Front Position lamp not working Both (4.2.1 (a) (ii)) | 1 |
| Rear Anti-roll bar linkage ball joint excessively worn Both (5.3.4 (a) (i)) | 1 |
| Suspension component mounting prescribed area is excessively corroded both front chassis legs |2.4.A.3| | 1 |
| Bumper damaged and likely to cause injury when grazed or contacted drivers door mirror |6.1.4 |a| |i|| | 1 |
| Offside Rear position lamp|s| incorrect colour lense broken |1.1.A.3e| | 1 |
| Offside Rear Lower Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor section. (5.3.6 (a) (i)) | 1 |
| Nearside Side repeater insecure |1.4.A.2b| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Apex. (5.3.6 (a) (i)) | 1 |
| Rear Direction indicator incorrect colour BOTH |1.4.A.2f| | 1 |
| Offside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Central Rear Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 1 |
| Offside Rear Brake cable has restricted free movement (1.1.15 (e)) | 1 |
| Offside Rear Torsion bar excessive play at an end fixing |2.4.E.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail-underside |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail- underside |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch-chassis rail |5.3.6 |a| |i|| | 1 |
| Offside Rear Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Lower Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Offside Rear Floor excessively deteriorated under battery (6.2.4 (a) (i)) | 1 |
| Offside Front Brake pipe leaking to rear at rear |3.6.A.1| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Nearside Rear Lower Suspension arm damaged and seriously weakened corroded |2.4.G.1| | 1 |
| Offside Front Lower Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Central Rear Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 1 |
| Offside Rear Inner Vehicle structure has damage which adversely affects braking or steering at seatbelt anchor point |6.1.A.1| | 1 |
| Offside Direction indicator not working side repeater |4.4.1 |a| |ii|| | 1 |
| Offside Power steering pipe/hose leaking main rack pressure pipe (2.1.5 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Where anti roll bar mounts to chassis (5.3.6 (a) (i)) | 1 |
| Brake hydraulic reservoir cap missing |1.1.10 |e|| | 1 |
| Offside Front Upper Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Nearside Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
| Nearside Front Anti-roll bar linkage insecure link bar broken |2.4.G.1| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Front Headlamp not in good working order |not working| |1.2.4a| | 1 |
| Offside Front Anti-roll bar corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
| Nearside Rear Anti-roll bar corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
| Offside Rear Anti-roll bar corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
| Nearside Rear Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting |6.2.2 |d| |i|| | 1 |
| Rear Exhaust hydrocarbon content after 2nd fast idle exceeds default limits |8.2.1.2 |b|| | 1 |
| Centre Front Exhaust system not adequately supported |7.1.1| | 1 |
| Centre Rear Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 1 |
| Centre Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 1 |
| Centre Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Rear Outer Suspension component mounting prescribed area is excessively corroded both sides |2.4.A.3| | 1 |
| Nearside Front Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Inner sill |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Wheel arch |2.4.A.3| | 1 |
| Headlamps matched pair are not the same colour |4.1.4 |d|| | 1 |
| Offside Front Headlamp has a product on the lens so that the light output is severely reduced |4.1.4 |b|| | 1 |
| Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Offside Front Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Steering pivot point has excessive play Steering wheel column |2.2.B.1g| | 1 |
| Exhaust has a major leak of exhaust gases Middle |7.1.2| | 1 |
| Front Exhaust catalytic converter missing where one was fitted as standard (8.2.2.1 (a)) | 1 |
| Brake hydraulic reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
| Hazard warning switch inoperative wont turn off (4.4.2 (a) (ii)) | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Front passenger door cannot be opened from inside the vehicle |6.2.3 |a|| | 1 |
| Front passenger door cannot be opened from outside the vehicle |6.2.3 |a|| | 1 |
| Offside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii)) | 1 |
| Emissions not tested Cut out whilst carrying out 2nd fast idle test. Would not restart (8.2.1.2 (d)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner & outer sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner & outer sill |2.4.A.3| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits @ 0.6% (8.2.1.2 (b)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced SILL |7.1.1 |a| |i|| | 1 |
| Offside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits Too high |8.2.1.2 |c|| | 1 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid brake calliper |1.1.16 |b| |i|| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill & inner sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill & inner sill (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing / chassis ; through wheel-arch (5.3.6 (a) (i)) | 1 |
| Front Drivers view of an obligatory external mirror significantly affected by an obstruction (3.1 (a) (ii)) | 1 |
| Nearside Front Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Next to anti roll bar mounting (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Next to anti roll bar mounting (6.2.2 (d) (i)) | 1 |
| Central Exhaust emissions likely to be affected by an exhaust leak centre box holed (8.2.2.1 (b)) | 1 |
| Exhaust carbon monoxide content at idle exceeds default limits .600 limit .200 |8.2.1.2 |b|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind wheel (5.3.6 (a) (i)) | 1 |
| Offside Rear Anti-roll bar linkage fractured |5.3.3 |b| |ii|| | 1 |
| Offside Front Lower Anti-roll bar linkage insecure Not attached |2.4.G.1| | 1 |
| Nearside Rear Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg holed |6.1.B.2| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to inner sill (6.1.1 (c) (i)) | 1 |
| Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides lower wing to sill (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis by (d)bush (6.2.2 (d) (i)) | 1 |
| Nearside Rear Macpherson strut corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Nearside Lower Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Offside Lower Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill / wheel arch area (7.1.1 (a) (i)) | 1 |
| Offside Rear Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front Front position lamp|s| adversely affected by the operation of another lamp FLASHING |1.1.A.3f| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded FLOOR PAN |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded CHASSIS |2.4.A.3| | 1 |
| Offside Front Upper Suspension arm locating pin retaining device missing split pin |2.4.G.3b| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is fractured outer sill |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Emissions not tested car cutting out (8.2.1.2 (d)) | 1 |
| Offside Front Outer Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Exhaust has a major leak of exhaust gases at rear joint |7.1.2| | 1 |
| Exhaust system not adequately supported bolt sheared at rear joint |7.1.1| | 1 |
| Nearside Rear Power steering pipe/hose leaking (2.1.5 (a)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected box section of chassis (5.3.6 (a) (ii)) | 1 |
| Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings In arch |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings In arch |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 1 |
| Nearside Front Lower brake caliper securing device missing |3.5.1j| | 1 |
| Rear Brake lever has restricted free movement |1.1.15 |e|| | 1 |
| Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Headlamp not working on dipped beam offside (4.1.1 (a) (ii)) | 1 |
| Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak Rear box (8.2.1.1 (b)) | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill. (6.2.2 (d) (i)) | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill. (6.2.2 (d) (i)) | 1 |
| Nearside Rear Outer Body panel corroded and likely to cause injury sill. (6.2.1 (a) (i)) | 1 |
| Offside Rear Outer Body panel corroded and likely to cause injury sill. (6.2.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch area (7.1.1 (a) (i)) | 1 |
| Offside Inner Front Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
| Nearside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside & nearside outer sill |5.2.6| | 1 |
| Nearside Rear Brake disc contaminated Rust |1.1.14 |b|| | 1 |
| Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt all (5.3.4 (b) (ii)) | 1 |
| Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt all (5.3.4 (b) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded centre sill to floor |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS LEG |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS LEG |5.3.6 |a| |i|| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill rotted (7.1.1 (a) (i)) | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill rotted (7.1.1 (a) (i)) | 1 |
| Offside Rear Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rail |5.3.6 |a| |i|| | 1 |
| Emissions not tested cat split and blowing (8.2.1.2 (d)) | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Offside Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Offside Rear Brake linkage has restricted free movement handbrake |3.5.1k| | 1 |
| Rear Inner brake disc in such a condition that it is seriously weakened |3.5.1i| | 1 |
| Nearside Front position lamp|s| not working SIDE LIGHT |1.1.A.3b| | 1 |
| Offside Front Steering component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected INNER FLITCH AREAS |2.1.2 |e| |ii|| | 1 |
| Nearside Rear Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Nearside Front Steering system has a road wheel fouling a part of the vehicle |2.2.D.2a| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under the wheel arch (6.1.1 (c) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases between centre and rear box joint (6.1.2 (a)) | 1 |
| front brake grabbing severely |3.7.A.2b| | 1 |
| Exhaust has a major leak of exhaust gases rear joint |6.1.2 |a|| | 1 |
| Nearside Rear Integral body structure strengthening plate or fastening insecure |6.1.1 |b| |i|| | 1 |
| Nearside Front Anti-roll bar missing |2.4.G.1| | 1 |
| Engine MIL inoperative or indicates a malfunction not visible (8.2.1.2 (h)) | 1 |
| Nearside Outer Rear Lower Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS RAIL (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS RAIL (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Anti-roll bar severely distorted |2.4.G.1| | 1 |
| Rear Exhaust has a major leak of exhaust gases exhaust has hole in back box |7.1.2| | 1 |
| Offside Inner Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
| Emissions not tested suspect cat not fitted |8.2.1.2 |d|| | 1 |
| Nearside Rear Brake performance not tested caliper sticking on wheel locks on |1.2.1 |g|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill area |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill area |7.1.1 |a| |i|| | 1 |
| Front Exhaust has a major leak of exhaust gases centre area |7.1.2| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill and wheel arch (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Anti-roll bar pin or bush excessively worn D BUSH |5.3.4 |a| |i|| | 1 |
| Nearside Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |hole| |6.1.B.2| | 1 |
| Nearside Front Torsion bar insecure at an end fixing |2.4.E.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL AREA. (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL AREA. (5.3.6 (a) (i)) | 1 |
| Offside Front Service brake grabbing severely |3.7.C.2| | 1 |
| Offside Rear Service brake grabbing severely |3.7.C.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis rail/roll bar /suspension mounting |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis /roll bar /suspension mounting |2.4.A.3| | 1 |
| Offside Rear Service brake grabbing severely |1.2.1 |c|| | 1 |
| Electronic braking system warning device inoperative (1.7 (a)) | 1 |
| Offside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
| Offside Front Anti-roll bar linkage ball joint dust cover missing |2.4.G.2| | 1 |
| Seat belt anchorage prescribed area is excessively corroded Offside outer sill |5.2.6| | 1 |
| Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor pan within 30cm seatbelt mount |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill within 30cm seat mount |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill within 30cm seat mount |6.1.B.2| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor inner wing (6.1.1 (c) (i)) | 1 |
| Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Centre Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired Sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits 1.150 |7.3.D.3| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
| Nearside Rear Braking system leaking calipar |3.6.A.1| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rail x 2 (5.3.6 (a) (i)) | 1 |
| Nearside Front Headlamp aim not tested both (4.1.2 (b)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced full sill |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced full sill |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i|| | 1 |
| Brake performance not tested brake pipe leaking offside rear |1.2.1 |g|| | 1 |
| Offside Obligatory mirror does not provide a view to the rear |8.1.2b| | 1 |
| Emissions not tested CO too high |8.2.1.2 |d|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Floor various. (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Floor. (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Offside Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases centre joint |6.1.2 |a|| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a ball joint drop link |2.4.G.2| | 1 |
| Nearside Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
| Offside Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Front position lamp|s| has a product on the lens so it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Front Brake hose damaged and likely to fail ferrule rusty |1.1.12 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outer sill (5.3.6 (a) (ii)) | 1 |
| Rear Brake pipe at imminent risk of failure or fracture pipe across the rear subframe (1.1.11 (a)) | 1 |
| Nearside Front Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
| Nearside Front Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Centre Rear Exhaust has a major leak of exhaust gases middlebox |7.1.2| | 1 |
| Nearside brake disc excessively pitted |3.5.1h| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i)) | 1 |
| Front Horn sound not in accordance with requirements |7.7 |c|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor rusted through |7.1.1 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wing rusted through |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wing rusted through |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassic |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassic |5.3.6 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 1 |
| Power steering component leaking Pipe (2.1.5 (a)) | 1 |
| Nearside Rear Braking system leaking rear caliper |3.6.A.1| | 1 |
| Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 1 |
| Nearside Rear Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Inner Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Fuel cap/sealing device missing fuel cap |6.1.3 |b| |i|| | 1 |
| Offside Rear Anti-roll bar linkage fractured drop link |5.3.3 |b| |ii|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor / outer sill |7.1.1 |a| |i|| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded Sill rear part |5.2.6| | 1 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Brake pipe excessively damaged brake pipe kinked |1.1.11 |c|| | 1 |
| Offside Front Headlamp levelling device inoperative |4.1.5 |a|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is inadequately repaired chassis leg |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is inadequately repaired chassis leg |5.3.6 |a| |i|| | 1 |
| Offside Rear Braking system leaking brake
caliper |3.6.A.1| | 1 |
| Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
| Exhaust has a major leak of exhaust gases centre to rear |7.1.2| | 1 |
| Emissions not tested blow centre to rear |7.3.A.1| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill x2 (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Nearside Front Headlamp missing |1.7.3| | 1 |
| Nearside Steering locking device insecure |2.2.C.1g| | 1 |
| Nearside Rear Brake pipe connection leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/arb mount (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Offside Outer Rear Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Front Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Front Headlamp not working on main beam |1.7.5a| | 1 |
| Nearside Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg behind wheel |2.4.A.3| | 1 |
| Fluid leak harmful to the environment or a risk to other road users |8.4.1 |a| |i|| | 1 |
| Offside Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Offside Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
| Offside Rear Road wheel fixing missing 1x fixing missing (5.2.1 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill/sill end |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill/sill end |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch area |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor section |5.2.6| | 1 |
| Nearside Front Anti-roll bar has excessive play in a ball joint drop link |2.4.G.2| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded sill/wheel arch |5.2.6| | 1 |
| Rear Exhaust has a major leak of exhaust gases joint (6.1.2 (a)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed at seat belt mounting point |6.1.B.2| | 1 |
| Offside Headlamp does not operate immediately when selected on main beam |1.7.4a| | 1 |
| Nearside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Offside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Nearside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced sill (6.1.1 (d) (i)) | 1 |
| Offside Inner Integral body structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 1 |
| Emissions not tested car over heating (8.2.1.2 (d)) | 1 |
| Offside Rear Braking system leaking BRAKE PIPE |3.6.A.1| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill /wing (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill /wing (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi (5.3.6 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor and outrigger (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor and outrigger (6.1.1 (c) (i)) | 1 |
| Offside Front Upper Suspension component likely to become detached split pin missing (5.3.3 (a) (ii)) | 1 |
| Nearside Rear Brake hose connection leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected chassis at anti roll bar |5.3.6 |a| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at anti roll bar |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near seat belt anchor (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near seat belt anchor (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired door sill (6.2.2 (d) (ii)) | 1 |
| Electrical wiring inadequately supported Alternator wiring touching steering column joint |1.9.2a| | 1 |
| Nearside Front Front position lamp|s| insecure |1.1.A.3a| | 1 |
| Offside Front Front position lamp|s| insecure |1.1.A.3a| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassic (5.3.6 (a) (i)) | 1 |
| Stop lamp(s) all missing (4.3.1 (a) (iii)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded sill panels |5.2.6| | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded sill panels |5.2.6| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded centre sill |5.2.6| | 1 |
| Nearside Front Obligatory mirror missing |8.1.1| | 1 |
| Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Brake pipe leaking on a hydraulic braking system front to rear (1.1.11 (b) (ii)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 1 |
| Fuel hose insecure |7.2.1| | 1 |
| Nearside Parking brake inoperative on one side low effort (1.4.1 (a)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chasis (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chasis (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced bottom chasis (6.1.1 (c) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front chassis legs split (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill X2 (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill X2 (6.1.1 (c) (i)) | 1 |
| Offside Rear Service brake excessively binding parking brake cable siezed (1.2.1 (f)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis box section |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis box section |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis box section (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis box section (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills (5.3.6 (a) (i)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits engine management light on (8.2.1.2 (c)) | 1 |
| Offside Front Front suspension locking device missing |2.5.A.4| | 1 |
| Offside Front Lower Front suspension locking device missing |2.5.A.4| | 1 |
| Central Rear Exhaust has a major leak of exhaust gases box |6.1.2 |a|| | 1 |
| Nearside Rear Coil spring fractured or broken top coil broken (5.3.1 (b) (i)) | 1 |
| Rear Exhaust system insecure mounting broken |6.1.2 |a|| | 1 |
| Rear Exhaust has a major leak of exhaust gases joint broken |6.1.2 |a|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded structure around body section joins rear suspension section. |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded structure around body section joins rear suspension section. |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill/floor |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer seal corroded through. (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer seal corroded through. (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced previous repair using fibre glass (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced previous repair using fibre glass (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced quarter incorperating battery (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced quarter (6.1.1 (c) (i)) | 1 |
| Central Front Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Brake disc significantly and obviously worn both front (1.1.14 (a) (i)) | 1 |
| Offside Rear coil spring incomplete (2.4.C.1a) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded wheel arch |5.2.6| | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded inner sill/chassis |5.2.6| | 1 |
| Emissions not tested due to water pump belt broken (8.2.1.2 (d)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside rear outer sill (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside rear outer sill (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside rear inner sill (5.3.6 (a) (i)) | 1 |
| Offside Front Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive 0.45% |7.3.D.3| | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill panel |5.2.6| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above antiroll bar (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to upper shock mount inside wheel arch area (5.3.6 (a) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases emissions test not carried out due to blowing exhaust |7.1.2| | 1 |
| Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Nearside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Offside Front Hydraulic brake calliper leaking bleed screw |1.1.16 |b| |i|| | 1 |
| Nearside Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing at chassis leg |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing and chassis leg |5.3.6 |a| |i|| | 1 |
| Nearside Front front brakes release unevenly |3.7.B.4| | 1 |
| Nearside Rear front brakes release unevenly |3.7.B.4| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering by subframe mounting point |6.1.A.1| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded SILL |2.4.A.3| | 1 |
| Nearside Passenger`s seat insecure |6.2.A.1| | 1 |
| Offside Rear Floor excessively deteriorated baterey tray coroded |6.2.4 |a| |i|| | 1 |
| Rear Exhaust emissions likely to be affected by an exhaust leak |8.2.2.1 |b|| | 1 |
| Offside Front Headlamp insecure |4.1.1 |c|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill area holed/corroded (7.1.1 (a) (i)) | 1 |
| Offside Rear Body panel corroded and likely to cause injury Wheel arch area sharp edge caused by corrosion (6.2.1 (a) (i)) | 1 |
| Nearside Front Service brake excessively binding caliper seized (1.2.1 (f)) | 1 |
| Oil leaking excessively from engine filter (8.4.1 (a) (i)) | 1 |
| Offside Subframe mounting prescribed area is excessively corroded sill at rear |2.4.A.3| | 1 |
| Braking system leaking offside rear caliper |3.6.A.1| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch chassis rail (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill and floor (6.1.1 (c) (i)) | 1 |
| Exhaust has a major leak of exhaust gases centre exhaust |7.1.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis under anti roll bar mounting braket |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis under anti roll bar mounting braket |2.4.A.3| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill holed |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded wheel arch holed |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis holed next to anti roll bar mount |2.4.A.3| | 1 |
| Offside Front Power steering component|s| leaking |2.3.3b| | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail under wheel arch |5.3.6 |a| |i|| | 1 |
| Brake pipe at imminent risk of failure or fracture front to rear (1.1.11 (a)) | 1 |
| Brake performance not tested danger of brake pipe failing (1.2.1 (g)) | 1 |
| Rear Exhaust silencer likely to become detached (8.1.1 (b) (ii)) | 1 |
| Central Rear Stop lamp(s) not working boot lid (4.3.1 (a) (ii)) | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail |6.1.A.1| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill panel |6.1.A.1| | 1 |
| front brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded |7.1.1 |a| |i|| | 1 |
| Front Bumper damaged and likely to cause injury when grazed or contacted number plate mounting has sharp edge |6.1.4 |a| |i|| | 1 |
| Front Headlamp adversely affected by the operation of another lamp |1.7.5c| | 1 |
| Nearside Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Bonnet cannot be secured in the closed position |3.1 |b| |i|| | 1 |
| Offside Rear Lower Integral body structure has excessive corrosion which adversely affects braking or steering sill corroded and holed |6.1.1 |c| |ii|| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded rear outer sill |5.2.6| | 1 |
| Rear Exhaust has a major leak of exhaust gases joint to centre exhaust very corroded |7.1.2| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Offside Front Upper Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
| Centre Rear Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Nearside Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Offside Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Emissions not tested exhaust broken |7.3.A.1| | 1 |
| Rear Exhaust has a major leak of exhaust gases box broken off pipe |7.1.2| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill to body |2.4.A.3| | 1 |
| Offside Front Supplementary restraint system warning lamp indicates a fault (7.1.6 (a)) | 1 |
| Central Front Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a)) | 1 |
| Central Front Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
| Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction sunstrip (3.1 (a) (ii)) | 1 |
| Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Suspension arm corroded and seriously weakened both rear lower wishbone bushes holed and corroded |2.4.G.1| | 1 |
| Front position lamp|s| incorrect colour both front blue |1.1.A.3e| | 1 |
| Offside Front Upper Front suspension locking device missing all joint |2.5.A.4| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced rear of both sills (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis Leg (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis Leg (5.3.6 (a) (i)) | 1 |
| Nearside Front Service brake indicates brake bind |3.7.D.2a| | 1 |
| Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside and offside rear chalked yellow. (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sills. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arche. (5.3.6 (a) (i)) | 1 |
| Offside Rear Anti-roll bar linkage fractured (5.3.3 (b) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting |5.3.6 |a| |i|| | 1 |
| Emissions not tested major leak of exhaust gases
failed BET Test. |7.3.A.1| | 1 |
| Offside Rear Brake pipe leaking on a hydraulic braking system metal brake pipe to flexible brake hose joint area(requires inspection) (1.1.11 (b) (ii)) | 1 |
| Nearside Rear Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under head light (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch / chassis rail has hole within 30cm of anti roll bar mountings |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength O/s inner sill end by inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected within wheelarch marked yellow (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected within wheelarch marked yellow (5.3.6 (a) (ii)) | 1 |
| Rear fog lamp lens defective such that emitted light is adversely affected Fog lamp is showing white light to rear (4.5.1 (b) (ii)) | 1 |
| Rear fog lamp does not emit a steady red light white showing to rear (4.5.4 (a)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is inadequately repaired not fully welded (5.3.6 (a) (i)) | 1 |
| Nearside Rear Body has a sharp edge caused by damage wheel arch |6.1.C.1| | 1 |
| Front Braking system leaking to rear pipe |3.6.A.1| | 1 |
| Offside Headlamp has a product on the lens so that the light output is severely reduced |4.1.4 |b|| | 1 |
| Power steering pipe/hose excessively corroded front of rack |2.1.5 |g| |i|| | 1 |
| Front Steering system excessively tight |2.2.D.1| | 1 |
| Nearside Headlamp lens seriously defective |4.1.1 |b| |ii|| | 1 |
| Offside Headlamp lens seriously defective |4.1.1 |b| |ii|| | 1 |
| Service brake excessively binding near side front |1.2.1 |f|| | 1 |
| Parking brake inoperative on one side off side |1.4.1 |a|| | 1 |
| Nearside Front Hydraulic brake calliper leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
| Offside Front Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Battery insecure and likely to fall from carrier no clamp |4.13 |a| |ii|| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak @ rotten front flange + assorted exhaust joints (8.2.1.1 (b)) | 1 |
| Headlamp light source and lamp not compatible high intensity bulbs fitted to reflector headlamps (4.1.4 (c)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg rail (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill on edge (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg rail (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Road wheel distorted |4.2.A.1a| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i)) | 1 |
| Offside Power steering component|s| leaking steering rack seal |2.3.3b| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer cill |5.2.6| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch |6.2.2 |d| |i|| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` items removed from rear view mirror |8.3.1e| | 1 |
| Offside Rear Outer Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits PUT A FUEL TREATMENT IN THE TANK |7.3.D.3| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear outer sill (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Hydraulic brake calliper inadequately mounted mounting bolt insecure (1.1.16 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch area (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch area (6.1.1 (c) (i)) | 1 |
| Exhaust has a major leak of exhaust gases MID TO BACK BOX JOIN |7.1.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded SILL |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Speedometer cannot be illuminated (7.8 (c) (ii)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area |6.1.1 |c| |i|| | 1 |
| Offside Rear coil spring corroded so that its cross sectional area is reduced and seriously weakened |2.4.C.1b| | 1 |
| Nearside Rear Anti-roll bar linkage cracked |2.4.G.1| | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b| | 1 |
| Nearside Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases Centre/rear join |7.1.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength innerwing |5.3.6 |a| |i|| | 1 |
| Nearside Front Tie bar/rod insecure |2.4.G.1| | 1 |
| Rear Exhaust has a major leak of exhaust gases JOINT |6.1.2 |a|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced LEG |6.1.1 |c| |i|| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Body has a projection caused by damage |6.1.C.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded and offside outer sills |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg marked in yellow chalk |5.3.6 |a| |i|| | 1 |
| Offside Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Front Electrical wiring insecure |1.9.2a| | 1 |
| Front Battery insecure |1.9.1| | 1 |
| Offside Front Suspension arm likely to become detached |5.3.3 |a| |ii|| | 1 |
| Nearside Front Suspension arm likely to become detached |5.3.3 |a| |ii|| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded rear sill area |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded flooring at sill lip area |5.2.6| | 1 |
| Front Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 1 |
| Brake pipe leaking n/s to o/s rear |3.6.A.1| | 1 |
| Braking system leaking at o/s/r caliper |3.6.A.1| | 1 |
| Nearside Rear Fluid suspension unit leaking |2.4.D.2| | 1 |
| Offside Rear Fluid suspension unit leaking |2.4.D.2| | 1 |
| Offside Rear Anti-roll bar linkage missing |2.4.G.1| | 1 |
| Nearside Outer Rear Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Outer Rear Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Central Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL |7.1.1 |a| |i|| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion WHEEL ARCH |6.1.C.1| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded OUTER SILL |5.2.6| | 1 |
| Offside Rear Upper Brake hose damaged and likely to fail |1.1.12 |a|| | 1 |
| Offside Front Lower Floor in such a condition it is likely to cause injury inner and outer sill corroded |6.2.4 |a| |ii|| | 1 |
| Offside Rear Braking system leaking brake pipe broken |3.6.A.1| | 1 |
| Offside Rear Rear position lamp|s| incorrect colour showing white |1.1.A.3e| | 1 |
| Offside Steering rack gaiter insecure |2.2.D.2d| | 1 |
| Nearside Front Front suspension retaining device missing |2.5.A.4| | 1 |
| Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 1 |
| Rear Anti-roll bar attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
| Fuel pipe insecure fouling steering column (6.1.3 (a) (i)) | 1 |
| Brake disc significantly and obviously worn both rear brake discs. |1.1.14 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll mounting area |chassis| |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting are |chassis| |5.3.6 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases Rear silencer flange broken (6.1.2 (a)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill holed |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill holed |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill holed |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded outer sill holed |2.4.A.3| | 1 |
| Nearside Outer Front Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Offside Front Upper Coil spring fractured or broken osf coil spring broken |5.3.1 |b| |i|| | 1 |
| Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength osr outer sill rotten and holed |5.3.6 |a| |i|| | 1 |
| Seat belt anchorage prescribed area is excessively corroded o/s n/s rear sills |5.2.6| | 1 |
| Offside Rear Braking system leaking caliper area |3.6.A.1| | 1 |
| Nearside Rear Upper Sub-frame attachment bracket/mounting insecure studs broken (5.3.3 (a) (i)) | 1 |
| Offside Rear Upper Sub-frame attachment bracket/mounting insecure nuts missing (5.3.3 (a) (i)) | 1 |
| Offside Rear Lower Sub-frame attachment bracket/mounting insecure bar bolt loose and bolt missing (5.3.3 (a) (i)) | 1 |
| Nearside Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear inner sill |7.1.1 |a| |i|| | 1 |
| Offside Brake cable has a seized clevis joint pivot |3.5.1c| | 1 |
| Front coil spring incomplete |2.4.C.1a| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg |6.1.1 |c| |i|| | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis leg |5.3.3 |b| |i|| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch / chassis leg |6.1.B.2| | 1 |
| Offside Front suspension has a suspension lower ball joint securing nut loose |2.5.B.1a| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 1 |
| Nearside Headlamp not working on main beam suspect loose wire |4.1.1 |a| |ii|| | 1 |
| Offside Front Upper Seat belt likely to become detached in the event of a collision Bolt loose |7.1.1 |a| |ii|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in front of wheel under wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill corroded (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill corroded (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired Outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired Outer sill. Repair patch not seam welded. (stitch welded and coated with filler. Patch corroded and filler coming away revealing poor repair. (7.1.1 (a) (i)) | 1 |
| Emissions not tested engine stalled, will not start (8.2.1.2 (d)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Centre Front Hazard warning switch faulty |1.4.B.1d| | 1 |
| Nearside Rear Hydraulic fluid leaking excessively brake caliper (8.4.1 (a) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases tail pipe missing |6.1.2 |a|| | 1 |
| Offside Rear Service brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
| Offside Direction indicators not working |1.4.A.2c| | 1 |
| Nearside Rear Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Nearside Front Tie bar/rod fractured |2.4.G.1| | 1 |
| Nearside Front Position lamp not working replace 501 bulb (4.2.1 (a) (ii)) | 1 |
| Nearside Front Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Offside Front Upper Suspension arm locating pin locking device not properly locked |2.4.G.3b| | 1 |
| Nearside Front Sub-frame attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Nearside Headlamp not working on dipped beam very dim |4.1.1 |a| |ii|| | 1 |
| Nearside Headlamp not working on main beam very dim |4.1.1 |a| |ii|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail, previous repair patch deteriorated |6.1.1 |c| |i|| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak rear silencer (8.2.1.1 (b)) | 1 |
| Nearside Front Anti-roll bar linkage damaged and seriously weakened (5.3.3 (b) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings around antiroll bar mounting |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings around body mounting |6.1.B.2| | 1 |
| Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
| Offside Rear Outer Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 1 |
| Central Front Fluid leak harmful to the environment or a risk to other road users |8.4.1 |a| |i|| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Front Body insecure and dangerous to other road users wing corroded |6.1.B.1b| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced [suspension area ] (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced [suspension area] (6.1.1 (c) (i)) | 1 |
| Offside Inner Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front Anti-roll bar worn and seriously weakened |2.4.G.1| | 1 |
| Offside Front Upper Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Tailgate cannot be secured in the closed position |6.4.1| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded anti roll bar mounting |2.4.A.3| | 1 |
| Nearside Rear Rear reflector excessively damaged so that its function is impaired |1.5.1c| | 1 |
| Nearside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Rear Upper Stop lamp not working |1.2.1b| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded OUTTER SILL
|5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded OUTTER SILL |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded FLOOR |5.2.6| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded SILL |5.2.6| | 1 |
| Offside Rear Braking system leaking brake pipe |3.6.A.1| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded rear of sill |5.2.6| | 1 |
| Exhaust has a major leak of exhaust gases rear join |7.1.2| | 1 |
| Emissions not tested due to bad running (8.2.1.2 (d)) | 1 |
| Offside Rear Body component damaged and likely to cause injury [damage to wing] |6.2.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 1 |
| Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Front Brake hose leaking |3.6.A.1| | 1 |
| Headlamp insecure |1.7.3| | 1 |
| Nearside Front brake caliper securing device missing |3.5.1j| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill panel (7.1.1 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill panel |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill panel |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Suspension component ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis |5.3.6 |a| |i|| | 1 |
| Offside Front Position lamp not working side light (4.2.1 (a) (ii)) | 1 |
| Offside Rear Upper Suspension arm cracked |2.4.G.1| | 1 |
| Nearside Rear Upper Suspension arm cracked |2.4.G.1| | 1 |
| Brake lever pivot has excessive wear or free play |1.1.1 |b|| | 1 |
| Offside Rear rear brake grabbing severely |3.7.A.5b| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill
|6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength forward sub frame mount/anti roll bar mounting area (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced rear section of nearside sill corroded within 30cm of seatbelt lower mount (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front anti roll bar (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar (5.3.6 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt link |2.4.G.2| | 1 |
| Nearside Front Lower Suspension arm attachment bracket/mounting nut missing |2.4.G.1| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheelarch / chassis leg |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (inner chassis member) (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (inner chassis member) (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is fractured lower chassis leg |2.4.A.3| | 1 |
| Nearside Rear Rear position lamp|s| has a product on the lens so it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Rear Rear position lamp|s| has a product on the lens so it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Rear Rear fog lamp has a product on the lens so it is not visible from a reasonable distance |1.3.2d| | 1 |
| Offside Rear Rear fog lamp has a product on the lens so it is not visible from a reasonable distance |1.3.2d| | 1 |
| Offside Rear Rear reflector not red in colour |1.5.1d| | 1 |
| Nearside Rear Rear reflector not red in colour |1.5.1d| | 1 |
| Nearside Rear Stop lamp has a product on the light source so it is not visible from a reasonable distance |1.2.1d| | 1 |
| Offside Rear Stop lamp has a product on the light source so it is not visible from a reasonable distance |1.2.1d| | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 1 |
| Offside Side repeater missing |4.4.1 |a| |ii|| | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch lower (6.1.1 (c) (i)) | 1 |
| Front Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 1 |
| Emissions not tested Coolant reservoir empty (8.2.1.2 (d)) | 1 |
| Nearside Rear Seat belt anchorage likely to become detached in the event of a collision sill holed |7.1.1 |a| |ii|| | 1 |
| Central Inner Seat belt anchorage prescribed area is excessively corroded sill/floor |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is severely distorted |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
| Brake lever has insufficient reserve travel parking brake |1.1.2 |a|| | 1 |
| Front Position lamp not working nearside and offside (4.2.1 (a) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing area (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/floor area (5.3.6 (a) (i)) | 1 |
| Offside Rear Shock absorbers damaged to the extent that it does not function spring saddle on strut excessively corroded and broke away (5.3.2 (b)) | 1 |
| Offside Rear Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded outersill |5.2.6| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Emissions not tested exhaust damaged |7.3.A.1| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill (7.1.1 (a) (i)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect and low (4.1.2 (c)) | 1 |
| Fuel cap/sealing device missing temporary fuel cap |7.2.4a| | 1 |
| Exhaust has a major leak of exhaust gases backbox/ backbox hanger corroded causing leak of gasses |7.1.2| | 1 |
| Offside Front Anti-roll bar linkage pin or bush likely to become detached |5.3.4 |a| |ii|| | 1 |
| Rear Exhaust has a major leak of exhaust gases flange between center and rear sections rotten (6.1.2 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch holed corroded within 30cms of suspension mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch corroded holed within 30cm suspension mounting (5.3.6 (a) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases rear silencer joint leaking gases on welded repair, also center silencer holed corroded leaking gases on seem . (6.1.2 (a)) | 1 |
| Offside Rear Upper Suspension component pin or bush excessively worn hub bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Lower Suspension arm pin or bush excessively worn suspension arm (both outer bushes) (5.3.4 (a) (i)) | 1 |
| Nearside Rear Lower Suspension arm synthetic bush deteriorated resulting in excessive movement front bush missing |2.4.G.2| | 1 |
| Offside Rear Lower Suspension arm synthetic bush deteriorated resulting in excessive movement rear bush missing |2.4.G.2| | 1 |
| Nearside Rear Lower Suspension arm synthetic bush deteriorated resulting in excessive movement rear bush insecure |2.4.G.2| | 1 |
| Rear Exhaust has a major leak of exhaust gases join |6.1.2 |a|| | 1 |
| Offside Service brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Rear Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Offside Rear Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Offside Front Driver`s airbag missing |7.1.5 |a|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering also has had sub standard welding repair |6.1.1 |c| |ii|| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering under drivers seat |6.1.1 |c| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg marked |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis holed/corroded (central) (5.3.6 (a) (i)) | 1 |
| Nearside Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
| Offside Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
| Emissions not tested Emissions failed |7.3.A.1| | 1 |
| Suspension component mounting prescribed area is excessively corroded both rear sills |2.4.A.3| | 1 |
| Offside Rear Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Offside Headlamp levelling device inoperative |4.1.5 |a|| | 1 |
| Offside Front Anti-roll bar linkage ball joint excessively worn drop link |5.3.4 |a| |i|| | 1 |
| Nearside Rear Anti-roll bar linkage ball joint excessively worn drop link |5.3.4 |a| |i|| | 1 |
| Offside Rear Anti-roll bar linkage ball joint excessively worn drop link |5.3.4 |a| |i|| | 1 |
| Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wing |5.3.6 |a| |i|| | 1 |
| Anti-roll bar linkage has excessive play in a ball joint o/s/r and n/s/r |2.4.G.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s and n/s inner sill/floors |6.1.B.2| | 1 |
| Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chalked (6.2.2 (d) (i)) | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 1 |
| Nearside Front Anti-roll bar linkage ball joint likely to become detached broken |5.3.4 |a| |ii|| | 1 |
| Front Front position lamp|s| not working both sides |1.1.A.3b| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Roll Bar Mount / Under Chassis Leg (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Roll Bar Mount / Under Chassis Leg (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail |mounting point for front rollbar| |5.3.6 |a| |i|| | 1 |
| Emissions not tested due to excessive blow from exhaust |8.2.1.2 |d|| | 1 |
| Offside Front Suspension arm ball joint excessively worn loose (5.3.4 (a) (i)) | 1 |
| Centre Rear Stop lamp not working upper |1.2.1b| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill to floor |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill |7.1.1 |a| |i|| | 1 |
| Central Brake pipe leaking on an air braking system front to rear |1.1.11 |b| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top mount (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded rear sill panel |5.2.6| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak CENTRE AT TOP OF PIPE |8.2.1.1 |b|| | 1 |
| Offside Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Rear Front suspension has excessive movement at a wishbone pin or bush Excessive Corroded. |2.5.A.1c| | 1 |
| Nearside Rear Suspension arm corroded and seriously weakened wishbone as marked |2.4.G.1| | 1 |
| Offside Rear Suspension arm corroded and seriously weakened wishbone as marked |2.4.G.1| | 1 |
| Nearside Front Seat belt buckle not functioning as intended |7.1.2 |d|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg behind road wheel |5.3.6 |a| |i|| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body sill |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings body sill |6.1.B.2| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 1 |
| Offside Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
| Emissions not tested ENGINE CUT OUT & WOULD NOT RESTART. |7.3.A.1| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Nearside Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Offside Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Centre Rear Brake pipe leaking |3.6.A.1| | 1 |
| Offside Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Front Outer Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting likely to become detached not secured correctly only 1 bolt (5.3.3 (a) (ii)) | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting insecure and impairing directional stability incorrectly secured (5.3.3 (a) (ii)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill. |7.1.1 |a| |i|| | 1 |
| Nearside Rear Parking brake lever has excessive movement indicating incorrect adjustment NO EFFORT (1.1.6 (c)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill end / inner arch (7.1.1 (a) (i)) | 1 |
| Front Power steering component leaking |2.1.5 |a|| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits CAT 0/65 U/S |8.2.1.2 |b|| | 1 |
| Front Position lamp not working BOTH SIDES |4.2.1 |a| |ii|| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill. |5.2.6| | 1 |
| Offside Front Tie bar/rod ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Track rod end seriously misaligned (2.1.3 (e)) | 1 |
| Rear Upper Suspension arm corroded and seriously weakened n/s and o/s |2.4.G.1| | 1 |
| Nearside Front Macpherson strut insecure lower lock nut loose |2.4.G.1| | 1 |
| Emissions oxygen sensor missing where one was fitted as standard (8.2.1.1 (a)) | 1 |
| Exhaust catalytic converter obviously defective (8.2.1.1 (a)) | 1 |
| Offside Front Anti-roll bar linkage missing (5.3.3 (a) (ii)) | 1 |
| Rear Seat belt anchorage prescribed area is excessively corroded both outer sills |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded viewed from near behind front bumper |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis near jacking point |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near jacking point |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill inner |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper strut area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering |6.1.1 |a| |ii|| | 1 |
| Front Hydraulic fluid leaking excessively steering fluid |8.4.1 |a| |i|| | 1 |
| Offside Rear Lower Suspension arm pin or bush excessively worn rear inner (5.3.4 (a) (i)) | 1 |
| Brake performance not tested front brake calipers leaking (1.2.1 (g)) | 1 |
| Nearside Front Inner Vehicle structure is fractured and structural rigidity is significantly reduced engine bay (6.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected underside of chassis holed near anti roll bar mount |5.3.6 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected underside of chassis holed near anti roll bar mount |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Coil spring insecure spring not seated correctly |5.3.1 |a| |i|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch |6.2.2 |d| |i|| | 1 |
| Nearside Front Position lamp not working dim (4.2.1 (a) (ii)) | 1 |
| Brake performance not tested F/N/S brake binding (1.2.1 (g)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Anti-roll bar linkage insecure and impairing directional stability loose (5.3.3 (a) (ii)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill underside corroded |6.1.1 |c| |i|| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Rear Torque/reaction arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Direction indicators not working (1.4.A.2c) | 1 |
| Nearside Rear Brake pipe at imminent risk of failure or fracture (1.1.11 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |
| Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced N/S Sill near seatbelt (6.1.1 (c) (i)) | 1 |
| Front brake disc has restricted free movement |3.5.1j| | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis at inner valance |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis at inner valance |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded floor at inner sill |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner back of wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded Chassis leg |2.4.A.3| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill panel (7.1.1 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis inside inner wing |2.4.A.3| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits 0.45% (8.2.1.2 (b)) | 1 |
| Offside Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 1 |
| Offside Rear Seat belt anchorage likely to become detached in the event of a collision (7.1.1 (a) (ii)) | 1 |
| Offside Front Brake prescribed area is excessively damaged excessive corrosion offside front chassis leg (1.1.21 (e) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced front floor both sides (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Macpherson strut mounting corroded and seriously weakened on lower suspension arm (5.3.3 (b) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis (2.4.A.3) | 1 |
| Offside Rear reflector more than 50% obscured |1.5.1b| | 1 |
| Nearside Rear reflector more than 50% obscured |1.5.1b| | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
| Offside Front Bumper likely to become detached (6.1.4 (a) (ii)) | 1 |
| Front Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 1 |
| Nearside Front Exhaust catalytic converter missing where one was fitted as standard |7.1.3| | 1 |
| Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i)) | 1 |
| Stop lamp not working centre stop light out |1.2.1b| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded lower sill panel |5.2.6| | 1 |
| Nearside Rear Direction indicators not working |1.4.A.2c| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg |6.1.A.1| | 1 |
| Offside Rear Brake lining|s| insecure |3.5.1g| | 1 |
| Rear Lower Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Offside brake disc excessively pitted |3.5.1h| | 1 |
| Front Subframe mounting prescribed area is excessively corroded o/s and n/s chassis legs |2.4.A.3| | 1 |
| Nearside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch chassis rail |2.4.A.3| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded going into inner wheel arch |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch within 12" suspension |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings arch |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is fractured and offside front chassis |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above anti roll bar d bush (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Drivers door cannot be opened from outside the vehicle (6.2.3 (a)) | 1 |
| Nearside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail by d bush (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to sill (6.1.1 (c) (i)) | 1 |
| Front Position lamp not working o/s and n/s |4.2.1 |a|| | 1 |
| Headlamp not working on main beam o/s and n/s |1.7.5a| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i)) | 1 |
| Offside Rear Shock absorbers damaged to the extent that it does not function |5.3.2 |b|| | 1 |
| Offside Front Headlamp has a product on the light source so that the light output is severely reduced |4.1.4 |b|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill corroded |7.1.1 |a| |i|| | 1 |
| Nearside front brake binding Unable to check wheel bearing |3.7.B.1| | 1 |
| Offside front brake binding Unable to check wheel bearing |3.7.B.1| | 1 |
| Central Braking system leaking brake pipe |3.6.A.1| | 1 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 1 |
| Offside Front Upper Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Floor box section |5.2.6| | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded outer sill holed |5.2.6| | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded outer sill holed |5.2.6| | 1 |
| Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Emissions not tested excessive blow and co output (8.2.1.2 (d)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis and inner wing (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both nearside and offside floor to inner sill (7.1.1 (a) (i)) | 1 |
| Emissions not tested excess output (8.2.1.2 (d)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition rear silencer missing (8.1.1 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded upper wishbone mount |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor to sill |5.2.6| | 1 |
| Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill holed (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing (6.2.2 (d) (i)) | 1 |
| Nearside Front Body component insecure wing at bottom (6.2.1 (a) (i)) | 1 |
| Hydraulic fluid leaking continuously posing a serious risk to road safety power steering (8.4.1 (a) (ii)) | 1 |
| Power steering inoperative pump, rack or hoses burst (2.1.5 (c) (i)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Offside Rear Lower Suspension arm fractured |2.4.G.1| | 1 |
| Offside Rear position lamp|s| incorrect colour broken |1.1.A.3e| | 1 |
| Offside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 1 |
| Offside Rear Lower Suspension arm likely to become detached |5.3.3 |a| |ii|| | 1 |
| Offside Front Lower Shock absorbers has an excessively worn bush |5.3.2 |c|| | 1 |
| Rear Brake pipe leaking on an air braking system (1.1.11 (b) (i)) | 1 |
| Nearside Rear Wheel nut|s| loose |4.2.A.1e| | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Brake lever has insufficient reserve travel Handbrake lever (1.1.2 (a)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sil (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill end cap / wheel arch (5.3.6 (a) (i)) | 1 |
| Offside front brake binding unable to test wheel bearing |3.7.B.1| | 1 |
| Upper Power steering pump insecure bolt loose (2.1.5 (d) (i)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill section |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill section |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch/ chassis rail |2.4.A.3| | 1 |
| Offside Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Power steering pipe/hose leaking under engine (2.1.5 (a)) | 1 |
| Parking brake inoperative on one side both sides (1.4.1 (a)) | 1 |
| Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected osf chassis (5.3.6 (a) (ii)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength NSR OSR outer sill |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OSF inner wheel arch |5.3.6 |a| |i|| | 1 |
| Power steering pipe/hose leaking pipe on rack (2.1.5 (a)) | 1 |
| Front Power steering pipe/hose excessively corroded both (2.1.5 (g) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill panel |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill panel |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill panel |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded boot floor |2.4.A.3| | 1 |
| Offside Rear Body component damaged and likely to cause injury light lense sharp edge |6.2.1 |a| |i|| | 1 |
| Offside Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 1 |
| Parking |secondary brake| on a single line braking system has inadequate effort at a wheel |1.3.1 |a| |i|| | 1 |
| Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Offside Front Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch chassis leg |2.4.A.3| | 1 |
| Front Position lamp not working both |4.2.1 |a|| | 1 |
| Nearside Rear Brake pipe leaking on a hydraulic braking system brake pipe (1.1.11 (b) (ii)) | 1 |
| Offside Front front brakes release unevenly |3.7.B.4| | 1 |
| Offside Rear Suspension rod insecurely attached (5.3.3 (a) (i)) | 1 |
| Offside Inner Brake pipe likely to become detached or damaged (1.1.11 (d) (ii)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Body panel likely to become detached wing fixing point both sides (6.2.1 (a) (ii)) | 1 |
| Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis. (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing/wheel arch area. (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Chassis area. (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis area in front of suspension component mounting. (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis area in front of suspension component mounting. (5.3.6 (a) (i)) | 1 |
| Headlamp excessively deteriorated so that the light output is severely reduced Both |1.7.5a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Outer sill |2.4.A.3| | 1 |
| Offside Rear Anti-roll bar linkage ball joint excessively worn nut loose |5.3.4 |a| |i|| | 1 |
| Steering column attachment defective to the extent that there is a serious risk of detachment lower column by rack (2.2.2 (d) (ii)) | 1 |
| Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits exhuast blow (8.2.1.2 (c)) | 1 |
| Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Nearside Front Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 1 |
| Nearside Front Service brake grabbing severely |3.7.C.2| | 1 |
| Offside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Headlamp aim projected beam image is obviously incorrect o/s and n/s/f |4.1.2 |c|| | 1 |
| Offside Front Steering linkage ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect outer lens faded (4.1.2 (c)) | 1 |
| Headlamp aim projected beam image is obviously incorrect outer lens faded (4.1.2 (c)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Nearside Front Macpherson strut modified so the suspension is likely to fail other components |5.3.3 |c| |ii|| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings engine bay |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill panel |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill panel |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded main chassis rail |2.4.A.3| | 1 |
| Nearside Front front brake binding (3.7.B.1) | 1 |
| Offside Front front brake binding (3.7.B.1) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill. |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill. |6.1.B.2| | 1 |
| Offside Front Anti-roll bar linkage has excessive play in a ball joint drop link detached. |2.4.G.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor pan |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor pan |5.2.6| | 1 |
| Offside Front Upper Front suspension has a suspension upper ball joint securing nut not locked |2.5.B.1a| | 1 |
| Nearside Front Lower Front suspension locking device missing SHOCK ABSORBER MOUNTING LOCKING DEVICE MISSING |2.5.A.4| | 1 |
| Nearside Front Lower Front suspension has a suspension lower ball joint securing nut not locked SWIVEL MOUNTING TO SUSPENSION LOWER ARM |2.5.B.1a| | 1 |
| Nearside Headlamp not working on dipped beam SWITCHES OFF WHEN HEIGHT ADJUSTER OR MAIN BEAM OPERATED |1.7.5a| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded CHASSIS LEG |2.4.A.3| | 1 |
| Nearside Front Fluid suspension unit leaking |2.4.D.2| | 1 |
| Front Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Supplementary Restraint System warning lamp indicates a fault air bag |5.4.2| | 1 |
| Nearside Front Upper Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Suspension component mounting prescribed area is fractured offside & nearside outer sill |2.4.A.3| | 1 |
| Offside Front Side repeater incorrect colour |4.4.3 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i)) | 1 |
| Headlamp light intensity severely reduced both (4.1.4 (a)) | 1 |
| Rear Fuel cap/sealing device missing |6.1.3 |b| |i|| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill panel |5.2.6| | 1 |
| Nearside Front Upper Anti-roll bar linkage has excessive play in a ball joint not attatched |2.4.G.2| | 1 |
| Valve stem seriously damaged all 4 |4.1.D.1e| | 1 |
| Headlamp light source and lamp not compatible Both nearside & offside - HiD headlamp conversions fitted at time of test. (4.1.4 (c)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis roll bar mount area (5.3.6 (a) (i)) | 1 |
| Front Braking system leaking at four way block near resevoir |3.6.A.1| | 1 |
| Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Front Wheel stud|s| missing |4.2.A.1e| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Position lamp lens seriously defective (4.2.1 (b)) | 1 |
| Offside Rear Lower Suspension arm corroded and seriously weakened wishbone arm (5.3.3 (b) (i)) | 1 |
| Rear Anti-roll bar linkage severely distorted |2.4.G.1| | 1 |
| Nearside Front Anti-roll bar linkage severely distorted |2.4.G.1| | 1 |
| Offside Rear Inner Brake pipe leaking |3.6.A.1| | 1 |
| Offside Rear Tie bar/rod ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm locating pin locking device missing |2.4.G.3b| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired chassis area |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasis (5.3.6 (a) (i)) | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded floor to sill |2.4.A.3| | 1 |
| Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt both sides upper and lower. |2.4.G.2| | 1 |
| Exhaust has a major leak of exhaust gases centre and rear |6.1.2 |a|| | 1 |
| Nearside Front Suspension arm attachment bracket/mounting insecure bolt loose |2.4.G.1| | 1 |
| Nearside Front Front position lamp|s| not working side light |1.1.A.3b| | 1 |
| Electrical wiring insecure and connectors likely to become disconnected under bonnet (4.11 (a) (ii)) | 1 |
| Offside Front Road wheel fixing missing |5.2.1 |a| |i|| | 1 |
| Offside Rear Road wheel fixing missing |5.2.1 |a| |i|| | 1 |
| Emission control equipment missing where fitted as standard Rear box |8.2.1.1 |a|| | 1 |
| Offside Front Brake hose excessively stretched |1.1.12 |b| |ii|| | 1 |
| Nearside Front Brake hose excessively stretched |1.1.12 |b| |ii|| | 1 |
| Road wheel fixing loose all wheel nuts loose |5.2.1 |a| |i|| | 1 |
| Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Offside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Rear Wheel nut|s| missing |4.2.A.1e| | 1 |
| Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired rear of outer sill (6.2.2 (d) (ii)) | 1 |
| Emissions not tested co to high (8.2.1.2 (d)) | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced door sill |6.1.1 |c| |i|| | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced door sill |6.1.1 |c| |i|| | 1 |
| Nearside Front Anti-roll bar linkage attachment bracket/mounting fractured ONE SIDE MISSING ON THE BOTTOM ARM |5.3.3 |b| |ii|| | 1 |
| Front Anti-roll bar missing |5.3.3 |a| |ii|| | 1 |
| Offside Front Shock absorbers insecurely attached BOTTOM BOLT HAS NO LOCKING DEVICE |5.3.2 |a| |i|| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner / outer / inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner / outer / inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced rear sill panel (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced rear sill panel (7.1.1 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Offside Brake pipe inadequately supported front to back |3.6.B.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor pan |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2| | 1 |
| Offside Rear Hydraulic fluid leaking excessively brake fluid leaking on brake caliper |8.4.1 |a| |i|| | 1 |
| Rear Parking brake lever defective so that it cannot be satisfactorily operated |1.1.6 |d|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER EDGE AND THE OUTER EDGE IN WHEEL ARCH |6.1.1 |c| |i|| | 1 |
| Rear Exhaust has a major leak of exhaust gases at joint |7.1.2| | 1 |
| Nearside Front Lower Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Electronic stability system warning lamp indicates a fault |3.4.1c| | 1 |
| Front Headlamp not working on main beam both (4.1.1 (a) (ii)) | 1 |
| Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 1 |
| Emissions not tested slight rattle from engine upon start up and when check for oil due to this there is no oil on the dipstick |8.2.1.2 |d|| | 1 |
| Offside Parking brake inoperative on one side made very little effort |1.4.1 |a|| | 1 |
| Offside Outer Rear Seat belt anchorage prescribed area is severely distorted |5.2.6| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area is excessively corroded wheel arch marked with chalk |2.4.A.3| | 1 |
| Nearside Front Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 1 |
| Rear fog lamp switch inoperative (4.5.3 (a) (ii)) | 1 |
| Headlamp incorrect colour hid aftermarket light kit fit intensity not in accordance with the requirements |4.1.4 |a|| | 1 |
| Offside Front Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Chassis leg |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Chassis leg |2.4.A.3| | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill end/inner wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i)) | 1 |
| Nearside Rear Inner Seat belt anchorage likely to become detached in the event of a collision sill (7.1.1 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected shocker top mounting (5.3.6 (a) (ii)) | 1 |
| Offside Rear Shock absorbers likely to become detached |5.3.2 |a| |ii|| | 1 |
| Offside Rear Macpherson strut corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
| Offside Rear Coil spring mounting corroded and seriously weakened |5.3.1 |b| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected INNER FLITCH//INNER WING AREAS,, |5.3.6 |a| |ii|| | 1 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Front drive shaft coupling is excessively worn |2.5.C.1c| | 1 |
| Offside Front drive shaft coupling is excessively worn |2.5.C.1c| | 1 |
| Front Exhaust has a part missing |7.1.1a| | 1 |
| Offside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Offside Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Offside Rear fog lamp adversely affected by the operation of another lamp |1.3.2f| | 1 |
| Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded centre outer sill |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill corroded |7.1.1 |a| |i|| | 1 |
| Offside Front Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
| Nearside Front Brake pipe leaking at union |3.6.A.1| | 1 |
| Front Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced arch |7.1.1 |a| |i|| | 1 |
| Nearside Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill outer inner (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Anti-roll bar linkage likely to become detached |5.3.3 |a| |ii|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i)) | 1 |
| Offside Rear Anti-roll bar linkage damaged and seriously weakened droplink snapped |5.3.3 |b| |i|| | 1 |
| Offside Rear Upper Suspension arm corroded and seriously weakened arm holed/corroded |5.3.3 |b| |i|| | 1 |
| Exhaust has a major leak of exhaust gases between backbox/centre |6.1.2 |a|| | 1 |
| Nearside Front Anti-roll bar linkage damaged and seriously weakened droplink snapped |5.3.3 |b| |i|| | 1 |
| Brake performance not tested due to burst brake pipe |3.7.A.1| | 1 |
| Offside Rear Rear fog lamp does not emit a steady red light |1.3.2e| | 1 |
| Nearside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Offside Rear Anti-roll bar linkage missing (5.3.3 (a) (ii)) | 1 |
| Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength yellow chalked (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Front Front position lamp|s| not working side/both |1.1.A.3b| | 1 |
| Offside Brake pipe leaking on a hydraulic braking system Front to rear pipe burst and losing brake fluid |1.1.11 |b| |ii|| | 1 |
| Front Windscreen damaged and affecting the driver`s view of the road |3.2 |a| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases Exhaust Mid Clamp Loose Exhaust Not Secure |7.1.2| | 1 |
| Front position lamp|s| not working O/S/F Sidelight Inoperative |1.1.A.3b| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings N/S/F Chassis Corroded Through |6.1.B.2| | 1 |
| Offside Rear Anti-roll bar pin or bush likely to become detached (5.3.4 (a) (ii)) | 1 |
| Nearside Front Side repeater missing |4.4.1 |a| |ii|| | 1 |
| Offside Front Side repeater not working |4.4.1 |a| |ii|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering at anti roll bar mounting (6.1.1 (c) (ii)) | 1 |
| Nearside Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Nearside Rear Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength x2 sections (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie rail under wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance lens broken |1.1.A.3d| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded siil |2.4.A.3| | 1 |
| Nearside Rear Brake hose excessively twisted |1.1.12 |b| |ii|| | 1 |
| Offside Rear Brake hose excessively twisted |1.1.12 |b| |ii|| | 1 |
| Brake master cylinder defective but brake still operating (1.1.10 (b) (i)) | 1 |
| Hazard warning switch missing |1.4.B.1d| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill. |6.1.B.2| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill. |6.1.B.2| | 1 |
| Offside Inner Rear brake disc cracked |3.5.1h| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner arch |2.4.A.3| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail holed (6.2.2 (d) (i)) | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect Lens clouded (4.1.2 (c)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded front chassis leg inner and outer |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner and outer chassis leg |2.4.A.3| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits 0.60% (8.2.1.2 (a)) | 1 |
| Nearside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen |3.5 |a|| | 1 |
| Offside Rear Position lamp showing white light to the rear |4.2.3 |a| |ii|| | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Offside Front Anti-roll bar linkage pin or bush likely to become detached (5.3.4 (a) (ii)) | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL |6.1.B.2| | 1 |
| Nearside front parking brake recording little or no effort |3.7.B.6a| | 1 |
| Nearside Front Position lamp not working flashing |4.2.1 |a|| | 1 |
| Offside Front Position lamp not working flashing |4.2.1 |a|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded rear outer sill |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded rear inner sill |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in front of rad (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near roll bar mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind roll bar mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength around drain hole (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced innersill (7.1.1 (a) (i)) | 1 |
| Offside Front Braking system leaking calliper union |3.6.A.1| | 1 |
| Front Body has a sharp edge caused by damage front number plate plinth has sharp edges |6.1.C.1| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Parking |secondary brake| on a single line braking system has no recorded effort at a wheel |1.3.1 |a| |ii|| | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner sill (6.2.2 (d) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Braking system leaking brake hose at banjo bolt |3.6.A.1| | 1 |
| Offside Rear Outer Subframe mounting prescribed area is excessively corroded sill
|2.4.A.3| | 1 |
| Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Nearside Front Lower Subframe mounting prescribed area is excessively corroded main chassis rail |2.4.A.3| | 1 |
| Offside Front Lower Subframe mounting prescribed area is excessively corroded main chassis rail |2.4.A.3| | 1 |
| Central Exhaust has a major leak of exhaust gases sleeve . |7.1.2| | 1 |
| Nearside Front wheel bearing rough when rotated can not be checked due to brake bind. |2.5.A.2| | 1 |
| Nearside Front Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded bodysill |5.2.6| | 1 |
| Nearside Front Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Nearside Front Lower Suspension arm ball joint likely to become detached Split pin missing. (5.3.4 (a) (ii)) | 1 |
| Windscreen in such a condition that visibility through swept area is seriously affected (3.2 (c) (ii)) | 1 |
| Rear Electrical wiring likely to drag on the ground (4.11 (a) (iii)) | 1 |
| Exhaust fumes entering cabin |6.1.2 |b| |i|| | 1 |
| Offside Rear Rear reflector excessively damaged so that its function is impaired |1.5.1c| | 1 |
| Exhaust has a major leak of exhaust gases Middle silencer at rear flange |7.1.2| | 1 |
| Power steering pipe|s| or hose|s| leaking pipe along steering rack |2.3.3b| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i)) | 1 |
| Central Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b)) | 1 |
| Supplementary restraint system warning lamp indicates a fault light flashing (7.1.6 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected floor corroded by suspension mounting points (5.3.6 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor corroded by suspension mounting point (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded at rear of sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor coming away from outer sill at rear of sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under sill corroded at rear of sill (7.1.1 (a) (i)) | 1 |
| Offside Front Road wheel fixing missing wheel nut missing (5.2.1 (a) (i)) | 1 |
| Front Service brake lagging in operation (1.2.1 (d)) | 1 |
| Exhaust catalytic converter obviously defective welding around cat (8.2.1.1 (a)) | 1 |
| Nearside Front Track rod end seriously misaligned loose (2.1.3 (e)) | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 1 |
| Front Power steering pipe/hose leaking pipe in front of radiator |2.1.5 |a|| | 1 |
| Nearside Front Track rod end loose |2.2.B.1d| | 1 |
| Nearside Front Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 1 |
| Offside Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area naxt to mcpherson (5.3.6 (a) (i)) | 1 |
| Offside Rear Wheel nut|s| missing One |4.2.A.1e| | 1 |
| Offside Rear Brake linkage has restricted free movement |3.5.1k| | 1 |
| Offside Rear Braking system leaking brake hose seals at caliper |3.6.A.1| | 1 |
| Nearside Rear Vehicle structure is deformed and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 1 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 1 |
| Nearside Front Power steering pump leaking |2.1.5 |a|| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive not tested due to condition of exhaust |7.3.D.3| | 1 |
| Exhaust emissions hydrocarbon content after 2nd fast idle excessive not tested due to condition of exhaust |7.3.D.3| | 1 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits not tested due to condition of exhaust |7.3.D.3| | 1 |
| Offside Rear Brake pipe at imminent risk of failure or fracture Front to Rear |1.1.11 |a|| | 1 |
| Brake performance not tested Due to pipe so rusty |1.2.1 |g|| | 1 |
| Nearside Front Vehicle structure is deformed and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 1 |
| Centre Lower Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Offside brake disc in such a condition that it is seriously weakened |3.5.1i| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nner sill area |6.1.B.2| | 1 |
| Nearside Outer Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing/chassis leg |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing/chassis leg |2.4.A.3| | 1 |
| Brake performance not tested due to burst brake pipe |1.2.1 |g|| | 1 |
| Offside Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
| Nearside Front Service brake excessively binding unable to check wheel bearing due to binding (1.2.1 (f)) | 1 |
| Nearside Front Macpherson strut inappropriately repaired |2.4.A.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired Floor |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired Chassis |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Chassis |5.2.6| | 1 |
| Nearside Front Lower Suspension arm locating pin locking device not properly locked Ball joint |2.4.G.3b| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded undersill |5.2.6| | 1 |
| Emissions not tested due to excessive exhaust blow not allowing reading |7.3.A.1| | 1 |
| Front Service brake excessively binding n/s and o/s |1.2.1 |f|| | 1 |
| Nearside Rear Braking system leaking cailper |3.6.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i)) | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive 4.321 %vol. |7.3.D.3| | 1 |
| Exhaust emissions hydrocarbon content after 2nd fast idle excessive 382 ppm vol. |7.3.D.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill (5.3.6 (a) (i)) | 1 |
| Nearside Front Anti-roll bar linkage has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Nearside Rear Anti-roll bar linkage attachment bracket/mounting likely to fail |5.3.3 |b| |ii|| | 1 |
| Offside Rear Anti-roll bar linkage attachment bracket/mounting likely to fail |5.3.3 |b| |ii|| | 1 |
| Fuel cap/sealing device does not fasten securely by positive means (7.2.4b) | 1 |
| Offside Windscreen wiper blade deteriorated (8.2.2) | 1 |
| Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Nearside Steering linkage ball joint ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Nearside Front Brake hose leaking |3.6.A.1| | 1 |
| Offside front brake binding unable to check wheel bearing |3.7.B.1| | 1 |
| Rear Inner Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Offside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting corroded above undertray (6.2.2 (d) (i)) | 1 |
| Nearside Rear Outer Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Emissions not tested due to vehicle cut out and wont start (8.2.1.2 (d)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting above under tray (6.2.2 (d) (i)) | 1 |
| Offside Rear Lower Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill (6.2.2 (d) (ii)) | 1 |
| Offside Brake hose stretched |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area |6.1.B.2| | 1 |
| Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area offside and nearside |6.1.B.2| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` air freshener hanging from interior mirror |8.3.1e| | 1 |
| Nearside Front Track rod end ball joint dust cover missing |2.2.C.1c| | 1 |
| Nearside Rear Outer Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) | 1 |
| Emissions not tested as major exhaust blow (8.2.1.2 (d)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced arch |7.1.1 |a| |i|| | 1 |
| Nearside Body component damaged and likely to cause injury mirror (6.2.1 (a) (i)) | 1 |
| Nearside Front Brake hose excessively damaged (1.1.12 (b) (ii)) | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corroded (6.1.1 (c) (i)) | 1 |
| Central Front Power steering pipe/hose excessively corroded All large pipes by steering rack |2.1.5 |g| |i|| | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Passenger`s seat insecure |6.2.A.1| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 1 |
| Emissions not tested due to overheating. |7.4.B.1| | 1 |
| Offside Front Indicator switch inoperative |4.4.2 |a| |ii|| | 1 |
| Offside Rear Floor excessively deteriorated sill |6.2.4 |a| |i|| | 1 |
| Offside Rear fog lamp obviously incorrectly positioned (4.5.4 (a)) | 1 |
| Central Exhaust system insecure (6.1.2 (a)) | 1 |
| Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear outer sill area (7.1.1 (a) (i)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits possibly due to exhaust leak on rear joint (8.2.1.2 (c)) | 1 |
| Offside Lower Suspension component ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Front Sub-frame corroded and seriously weakened chassis( under wheel arch) (5.3.3 (b) (i)) | 1 |
| Offside Front Sub-frame corroded and seriously weakened chassis (under wheel arch) (5.3.3 (b) (i)) | 1 |
| Nearside Front Brake hose connection leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 1 |
| Rear Exhaust has a major leak of exhaust gases exhaust flange (6.1.2 (a)) | 1 |
| Seat belt anchorage prescribed area is excessively corroded Offside rear outer sill |5.2.6| | 1 |
| Emissions not tested Due to vehicle cutting out |7.4.B.1| | 1 |
| Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Rear fog lamp emits a light other than red emits white light. |1.3.2e| | 1 |
| Electrical wiring inadequately supported wiring in engine compartment insecure |1.9.2a| | 1 |
| Nearside Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Centre Front Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 1 |
| Outer Front Power steering pipe|s| or hose|s| leaking |2.3.3b| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded under sill |5.2.6| | 1 |
| Exhaust emissions carbon monoxide content at idle excessive 0.44% |7.3.D.4| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive 0.63% |7.3.D.3| | 1 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 1 |
| Rear Exhaust emissions likely to be affected by an exhaust leak joint (8.2.1.1 (b)) | 1 |
| Exhaust has a major leak of exhaust gases exhaust broken (6.1.2 (a)) | 1 |
| Offside Front Anti-roll bar missing |2.4.G.1| | 1 |
| Nearside Front Front suspension locking device ineffective |2.5.A.4| | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill Panel (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced cill |7.1.1 |a| |i|| | 1 |
| Offside Rear Upper Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear fog lamp lens defective such that emitted light is adversely affected |4.5.1 |b| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded top mount |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis near roll bar mount area |2.4.A.3| | 1 |
| Nearside Front Ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected CHASSIS LEG |5.3.6 |a| |ii|| | 1 |
| Rear Exhaust has a major leak of exhaust gases box flange rusted away |7.1.2| | 1 |
| Centre Exhaust has a major leak of exhaust gases section flange rusted away |7.1.2| | 1 |
| Offside Rear Anti-roll bar linkage damaged and seriously weakened not attached at top |2.4.G.1| | 1 |
| Nearside Rear Lower Suspension arm worn and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded SILL AREA |5.2.6| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded SILL AREA |5.2.6| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Offside Front Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 1 |
| Offside Front brake caliper securing device missing |3.5.1j| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis around anti roll bar mount (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases rear flange joint(cat section to back box) (6.1.2 (a)) | 1 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both |2.4.G.2| | 1 |
| Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both |2.4.G.2| | 1 |
| Nearside Rear Rear position lamp|s| incomplete |1.1.4a| | 1 |
| Nearside Rear Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced nearside outer sill at rear (7.1.1 (a) (i)) | 1 |
| Nearside Front Lower Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Rear Exhaust has a major leak of exhaust gases flange |6.1.2 |a|| | 1 |
| Rear Parking brake lever has excessive movement indicating incorrect adjustment |1.1.6 |c|| | 1 |
| Offside Rear Upper Radius arm synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Rear fog lamp has a product on the light source so it is not visible from a reasonable distance |1.3.2d| | 1 |
| Headlamp has a product on the lens so that the light output is severely reduced nearside and offside front (4.1.4 (b)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced nearside floor to sill (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced offside floor to sill (7.1.1 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside front inner wheel arch (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside front chassis (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced leg (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced leg (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced leg outer side (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Body panel corroded and likely to cause injury sill (6.2.1 (a) (i)) | 1 |
| Offside Rear Outer Body panel corroded and likely to cause injury sill (6.2.1 (a) (i)) | 1 |
| Nearside Front Service brake grabbing severely |1.2.1 |c|| | 1 |
| Nearside Rear Service brake grabbing severely |1.2.1 |c|| | 1 |
| Offside Rear Outer Body component corroded and likely to cause injury SILL |6.2.1 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength End of sill/inner arch area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength End of sill and inner arch area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting undersill (6.2.2 (d) (i)) | 1 |
| Nearside Front Road wheel badly distorted |5.2.2 |c| |i|| | 1 |
| Nearside Rear Road wheel badly distorted |5.2.2 |c| |i|| | 1 |
| Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings rear sills not fully seam welded |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Central Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings subframe support bar holed due to corrosion. |6.1.B.2| | 1 |
| Offside Front Brake pipe inadequately supported front- middle- and rear plastic pipe holders insecure |3.6.B.1| | 1 |
| Offside Front Fuel pipe insecure front - middle- and rear insecure |7.2.1| | 1 |
| Lower Anti-roll bar corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded chassis |5.2.6| | 1 |
| Nearside Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Front Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Emissions not tested |7.4.B.1| | 1 |
| Nearside Rear Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded SILL |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill area |2.4.A.3| | 1 |
| Front Brake fluid warning lamp illuminated dash |3.6.G.2| | 1 |
| Offside Front Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Emissions not tested overheated during test |7.3.A.1| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg (6.1.1 (c) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired sill at prior filler holed/corroded |5.2.6| | 1 |
| Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Close to forward mount (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Close to forward mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill |7.1.1 |a| |i|| | 1 |
| Offside Front Wheel stud|s| missing |4.2.A.1e| | 1 |
| Offside Rear Upper Suspension arm locating pin insecure |2.4.G.3a| | 1 |
| Emissions not tested exhaust leak |8.2.1.2 |d|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Offside Front Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 1 |
| Front Position lamp with a multiple light source more than 1/2 not functioning both (4.2.1 (a) (ii)) | 1 |
| Central Stop lamp(s) not working high level (4.3.1 (a) (ii)) | 1 |
| Nearside Front Steering system fouling the steering boot is fouling on the engine cover |2.2.D.2a| | 1 |
| Inner Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Anti-roll bar linkage ball joint dust cover missing (5.3.4 (b) (ii)) | 1 |
| Offside Rear Anti-roll bar linkage ball joint dust cover missing (5.3.4 (b) (ii)) | 1 |
| Fuel system component leaking |7.2.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corroded and holed at anti roll bar and subframe mounting prescribed area |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced heavily corroded at anti roll bar and subframe mounting prescibed area |6.1.1 |c| |i|| | 1 |
| Position lamp not working Both front |4.2.1 |a|| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Offside rear outer sill |6.1.B.2| | 1 |
| Anti-roll bar rubber mounting deteriorated resulting in excessive movement Both front D-bushes |2.4.G.2| | 1 |
| Nearside Front Headlamp light intensity severely reduced dip beam bulb dull (4.1.4 (a)) | 1 |
| Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis wheel arch side |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis wheel arch side |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis bonnet side |5.3.6 |a| |i|| | 1 |
| Nearside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength bodysill |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength bodysill |5.3.6 |a| |i|| | 1 |
| Nearside Front Brake hose leaking on a hydraulic braking system brake hose to metal pipe leaking |1.1.12 |c| |ii|| | 1 |
| Front position lamp|s| not working both sides |1.1.A.3b| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill area |7.1.1 |a| |i|| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill area |7.1.1 |a| |i|| | 1 |
| Offside Front Lower Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired wheel arch chassis leg (6.2.2 (d) (ii)) | 1 |
| Front Headlamp does not operate immediately when selected on main beam |1.7.4a| | 1 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Brake performance not tested off side rear brake pipe burst (1.2.1 (g)) | 1 |
| Rear Sub-frame insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired OUTER SILL PANEL (7.1.1 (a) (i)) | 1 |
| Rear Sub-frame attachment bracket/mounting missing BOTH SUBFRAME MOUNTS ROTTED AWAY (5.3.3 (a) (ii)) | 1 |
| Offside Rear Hydraulic fluid leaking excessively (8.4.1 (a) (i)) | 1 |
| Rear Anti-roll bar linkage ball joint excessively worn both |5.3.4 |a| |i|| | 1 |
| Offside Front suspension has a suspension upper ball joint securing nut not locked |2.5.B.1a| | 1 |
| Rear Exhaust has a major leak of exhaust gases tail pipe missing on box |7.1.2| | 1 |
| Seat belt anchorage prescribed area is excessively corroded n/s/r sill |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded o/s/r sill |5.2.6| | 1 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2) | 1 |
| Parking brake lever ratchet mechanism is excessively worn |3.1.5| | 1 |
| Emissions not tested due to rear exhaust blowing |7.3.A.1| | 1 |
| Exhaust emissions carbon monoxide content at idle excessive Fast idle test. |7.3.D.4| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner arch/ front leg |2.4.A.3| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded front leg/ inner arch |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside rear outer sill |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside rear outer sill |2.4.A.3| | 1 |
| Rear Stop lamp not working centre |1.2.1b| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg inner arch area (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg inner arch area (6.1.1 (c) (i)) | 1 |
| Offside Front Headlamp levelling device inoperative (4.1.5 (a)) | 1 |
| Emissions oxygen sensor obviously defective damaged (8.2.1.1 (a)) | 1 |
| Offside Rear Position lamp has a product on the lens or light source which significantly reduces light intensity (4.2.3 (b) (ii)) | 1 |
| Nearside Rear Position lamp has a product on the lens or light source which significantly reduces light intensity (4.2.3 (b) (ii)) | 1 |
| Offside Tie bar/rod fractured |2.4.G.1| | 1 |
| Offside Front Anti-roll bar locating pin insecure |2.4.G.3a| | 1 |
| Nearside Rear rear brake juddering severely |3.7.A.5b| | 1 |
| Nearside Rear Braking system leaking brake union area |3.6.A.1| | 1 |
| Nearside Front Anti-roll bar linkage attachment bracket/mounting likely to fail |5.3.3 |b| |ii|| | 1 |
| Offside Front Headlamp light intensity severely reduced dip beam (4.1.4 (a)) | 1 |
| Headlamp has a product on the lens so that the light output is severely reduced both headlamps (4.1.4 (b)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded lower sill |2.4.A.3| | 1 |
| Nearside Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a| | 1 |
| Offside Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill (6.1.1 (c) (ii)) | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill panel |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded sill panel |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer Sill Area. (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer Sill Area. (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer seal (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill/wheel arch |7.1.1 |a| |i|| | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced centre sill |7.1.1 |a| |i|| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch |7.1.1 |a| |i|| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch |7.1.1 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Position lamp not working Side light |4.2.1 |a| |ii|| | 1 |
| Offside Front Position lamp not working Side light |4.2.1 |a| |ii|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Quarter sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Nearside Rear Upper Seat belt anchorage prescribed area is excessively corroded inner arch |5.2.6| | 1 |
| Offside Rear Upper Seat belt anchorage prescribed area is excessively corroded inner arch x2 |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill x2 |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill x2 |5.2.6| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis @ floor pan |6.1.A.1| | 1 |
| Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength sills |5.3.6 |a| |i|| | 1 |
| Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength sills |5.3.6 |a| |i|| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Rear fog lamp switch missing (4.5.3 (a) (ii)) | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis | inner wheel arch area | |5.3.6 |a| |i|| | 1 |
| Power steering pump drive system missing |2.3.6| | 1 |
| Nearside Front Anti-roll bar linkage has an unsafe modification wrong size of drop link for application |5.3.3 |c| |i|| | 1 |
| Offside Front Anti-roll bar linkage has an unsafe modification wrong size of drop link for application |5.3.3 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill coroded into hole |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 1 |
| Nearside Rear Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Front Anti-roll bar has excessive play in a ball joint both front drop links |2.4.G.2| | 1 |
| Rear Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
| Central Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength FLOOR |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Hydraulic brake cylinder leaking hydraulic fluid caliper (1.1.16 (b) (i)) | 1 |
| Nearside Front Upper Suspension arm ball joint likely to become detached Split pin on castlelated nut missing. (5.3.4 (a) (ii)) | 1 |
| Oil leaking excessively from engine o/s and rear tell tale of engine (8.4.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch cross member |5.3.6 |a| |i|| | 1 |
| Centre Front Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis (inner wheel arch) (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength end of sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under sill |7.1.1 |a| |i|| | 1 |
| Headlamp has a product on the light source so that the light output is severely reduced both front (4.1.4 (b)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail above anti-roll bar mounting (5.3.6 (a) (i)) | 1 |
| Nearside Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis / inner wing |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis / inner wing |2.4.A.3| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Rear Brake disc significantly and obviously worn both inner face (1.1.14 (a) (i)) | 1 |
| Offside Rear Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Front Brake pipe excessively chafed |3.6.B.2c| | 1 |
| Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Exhaust emissions - engine idle speed too high idle speed erratic and too high (8.2.1.2 (e)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is inadequately repaired sill replacement panel is not welded on vertical face and into lower sill edge , and on rear is not welded onto rear wheelarch lip (7.1.1 (a) (i)) | 1 |
| Nearside Rear Lower Suspension arm corroded and seriously weakened corroded and holed (5.3.3 (b) (i)) | 1 |
| Offside Rear Lower Suspension arm corroded and seriously weakened corroded and holed (5.3.3 (b) (i)) | 1 |
| Offside Rear Upper Suspension arm corroded and seriously weakened corroded away on webbing on underside (5.3.3 (b) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill corroded on underside of drivers seat area (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end corroded and holed near to subframe mounting area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength chassis leg corroded and fractured by anti roll bar mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill to floor and box section .Also inner arch shield missing. |7.1.1 |a| |i|| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Nearside Rear Brake hose twisted |3.6.B.4c| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner bottom wheel arch |7.1.1 |a| |i|| | 1 |
| Brake pipe leaking on a hydraulic braking system Front to rear. (1.1.11 (b) (ii)) | 1 |
| Brake performance not tested Due to fluid leak. (1.2.1 (g)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Nearside front chassis leg |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Offside rear outer sill/inner wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Brake pipe leaking Front to rear |3.6.A.1| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Body sill (6.1.1 (c) (i)) | 1 |
| Nearside Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Offside Front Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Nearside Front Upper Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength underside of sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill edge |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill edge |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill come away from body |5.2.6| | 1 |
| Anti-roll bar linkage has excessive play in a ball joint BOTH REAR DROP LINKS |2.4.G.2| | 1 |
| Offside Front Power steering pipe|s| or hose|s| leaking |2.3.3b| | 1 |
| Brake performance not tested brake pipe burst (1.2.1 (g)) | 1 |
| Offside Rear Brake pipe leaking on a hydraulic braking system across axel (1.1.11 (b) (ii)) | 1 |
| Front position lamp|s| not working both sides front |1.1.A.3b| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i)) | 1 |
| Rear Exhaust system not adequately supported mounting split |7.1.1| | 1 |
| Nearside Rear Shock absorber casing corroded externally so the unit does not function |2.7.2a| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor and sill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor and sill |6.1.B.2| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Corrosion in inner sill within 30cm of load bearing member (6.2.2 (d) (i)) | 1 |
| Offside Front Anti-roll bar synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Offside Rear Stop lamp has less than 50% of the light sources illuminating |1.2.1b| | 1 |
| Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i|| | 1 |
| Emissions not tested overheating water pump not circulating |8.2.1.2 |d|| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded Front Arch |5.2.6| | 1 |
| Central Upper Stop lamp not working |1.2.1b| | 1 |
| Power steering component|s| leaking from a failed seal |2.3.3b| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill |rear |5.2.6| | 1 |
| Nearside Rear Service brake excessively binding wheel binding |1.2.1 |f|| | 1 |
| Exhaust has a major leak of exhaust gases Rear silencer |7.1.2| | 1 |
| Offside Front Anti-roll bar linkage ball joint likely to become detached broken |5.3.4 |a| |ii|| | 1 |
| Emissions not tested see exhaust. |8.2.1.2 |d|| | 1 |
| Exhaust has a major leak of exhaust gases at joint between mid and rear sections. |6.1.2 |a|| | 1 |
| Nearside Rear Parking brake inoperative on one side binding (1.4.1 (a)) | 1 |
| Offside Rear Parking brake inoperative on one side binding (1.4.1 (a)) | 1 |
| Nearside Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Offside Rear Wheel nut|s| loose x4 |4.2.A.1e| | 1 |
| Offside Headlamp insecure I added a cable tie! (4.1.1 (c)) | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis rail (5.3.3 (b) (i)) | 1 |
| Power steering pipe|s| or hose|s| leaking from a seal n s front |2.3.3b| | 1 |
| Nearside Front Headlamp not in good working order |not working| |1.2.4a| | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill section (6.2.2 (d) (i)) | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside sill |rear| |5.2.6| | 1 |
| Emissions not tested auxiliary belt broken |8.2.1.2 |d|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Behind bumper/ Wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Behind bumper/ Wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Rear Body component corroded and likely to cause injury Exhaust tip (6.2.1 (a) (i)) | 1 |
| Driver`s airbag obviously defective warning light on |5.4.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of rear chalked |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch as marked (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering roll bar mount (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Exhaust has a major leak of exhaust gases rear box.join to box also deteriorated |7.1.2| | 1 |
| Nearside Rear Trailing arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Rear Trailing arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Lower Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
| Nearside Rear Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Road wheel fixing loose (5.2.1 (a) (i)) | 1 |
| Front All direction indicators not working both (4.4.1 (a) (ii)) | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill/floor |6.1.B.2| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 1 |
| Electrical wiring insecure and connectors likely to become disconnected BATTERY (4.11 (a) (ii)) | 1 |
| Central Exhaust emissions likely to be affected by an exhaust leak exhaust blowing at 2x joints - affecting lambda reading (8.2.1.1 (b)) | 1 |
| Offside Rear Road wheel distorted |4.2.A.1a| | 1 |
| Nearside Front Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced inadequately repaired |7.1.1 |a| |i|| | 1 |
| Nearside Rear Brake cable has restricted free movement ? |3.5.1k| | 1 |
| Offside Front Upper Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Rear Stop lamp|s| missing |4.3.1 |a| |ii|| | 1 |
| Offside Front Anti-roll bar linkage attachment bracket/mounting fractured Mount broken from lower arm (5.3.3 (b) (ii)) | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering both front chassis rails |6.1.1 |c| |ii|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both inner sills (7.1.1 (a) (i)) | 1 |
| Nearside Front Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
| Nearside Rear Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Headlamp not working on dipped beam aim not tested (4.1.1 (a) (ii)) | 1 |
| Exhaust emissions carbon monoxide content excessive double legal limit (8.2.1.2 (b)) | 1 |
| Vehicle structure is fractured and structural rigidity is significantly reduced both rear sills holed |6.1.1 |a| |i|| | 1 |
| Front Tie bar/rod has excessive play in a ball joint both |2.4.G.2| | 1 |
| Emissions not tested High Co and low lambda engine has misfire |7.3.A.1| | 1 |
| Front Bonnet cannot be secured in the closed position |8.4.1| | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits due to exhaust blowing (8.2.1.2 (c)) | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by anti roll bar bracket (5.3.6 (a) (i)) | 1 |
| Parking brake lever defective so that it cannot be satisfactorily operated |3.1.3c| | 1 |
| Drivers view of the road through the swept area of the windscreen materially affected by an obstruction (3.1 (a) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded rear outer sill |5.2.6| | 1 |
| Offside Lower Front suspension locking device missing ball joint split pin missing |2.5.A.4| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi leg (5.3.6 (a) (i)) | 1 |
| Offside Front Anti-roll bar ball joint likely to become detached detached (5.3.4 (a) (ii)) | 1 |
| Nearside Rear Tie bar/rod attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti-roll bar (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti-roll bar (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area is excessively corroded N/S/R INNER ARCH HOLED - MARKED YELLOW |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded O/S/R INNER ARCH HOLED - MARKED YELLOW |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases middle to rear join |6.1.2 |a|| | 1 |
| Nearside Rear Coil spring fractured or broken broken |5.3.1 |b| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sil |5.2.6| | 1 |
| Offside Anti-roll bar linkage fractured |2.4.G.1| | 1 |
| Nearside Front Service brake excessively fluctuating 30kgf (1.2.1 (e)) | 1 |
| Parking brake efficiency below requirements eff 10% (1.4.2 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill excessive body filler used (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill excessive body filler used (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wheel arch (5.3.6 (a) (ii)) | 1 |
| Offside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Nearside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Offside Front Suspension arm locating pin insecure |2.4.G.3a| | 1 |
| Steering wheel retaining device insecure |2.1.6| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill front and rear |marked in yellow| |6.2.2 |d| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded floor pan as marked |2.4.A.3| | 1 |
| Road wheel fixing missing 1 x each wheel (5.2.1 (a) (i)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak exhaust backbox major leak (8.2.1.1 (b)) | 1 |
| Brake lever pivot has excessive wear or free play excess play in h/brake lever (1.1.1 (b)) | 1 |
| Offside Front Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |
| Rear Seat belt anchorage prescribed area strength or continuity significantly reduced as marked offside and nearside inner wing and outer sill as marked |7.1.1 |a| |i|| | 1 |
| Offside Front Body panel insecure Wing insecure - Tape up as temporary measure (6.2.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill corroded to excess (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded closing panel |2.4.A.3| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced backing sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar insecure |2.4.G.1| | 1 |
| Stop lamp(s) not working High level (4.3.1 (a) (ii)) | 1 |
| Nearside Rear coil spring worn so that its cross sectional area is reduced and seriously weakened |2.4.C.1b| | 1 |
| Offside Rear coil spring worn so that its cross sectional area is reduced and seriously weakened |2.4.C.1b| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg to inner wing by anti roll bar mount/sub frame mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg to inner wing by anti roll bar /sub frame mounts |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases centre joint (6.1.2 (a)) | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Nearside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Offside Headlamp has a product on the lens which changes emitted colour to other than white or yellow (4.1.4 (b)) | 1 |
| Offside Front Headlamp not working on main beam High Beam Inoperative (4.1.1 (a) (ii)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill marked with chalk (7.1.1 (a) (i)) | 1 |
| Front Headlamp not working on dipped beam both |1.7.5a| | 1 |
| Nearside Front Lower Power steering pipe/hose leaking (2.1.5 (a)) | 1 |
| Rear Exhaust has a major leak of exhaust gases silencer joint area (6.1.2 (a)) | 1 |
| Power steering component|s| leaking from a failed seal Leak from power steering rack |2.3.3b| | 1 |
| Offside Rear Body component corroded and likely to cause injury side wing (6.2.1 (a) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Torque/reaction arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting insecure drop link |2.4.G.1| | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Hazard warning lamps inoperative (4.4.1 (e)) | 1 |
| Front Power steering inoperative and steering adversely affected (2.1.5 (c) (ii)) | 1 |
| Emissions not tested co and lamba high (8.2.1.2 (d)) | 1 |
| Offside Rear Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded undercarridge area |5.2.6| | 1 |
| Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt Drop link lower dust cover |2.4.G.2| | 1 |
| Nearside Brake cable has restricted free movement (1.1.15 (e)) | 1 |
| Brake master cylinder fluid level below minimum level |3.6.G.1e| | 1 |
| Offside Front Windscreen wiper blade missing |8.2.2| | 1 |
| Rear Hydraulic brake cylinder leaking hydraulic fluid Metal brake pipe |1.1.16 |b| |i|| | 1 |
| Nearside Windscreen wiper not working |3.4 |a|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg holed |5.3.6 |a| |i|| | 1 |
| Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering chassis |6.1.1 |c| |ii|| | 1 |
| Offside Front Integral body structure has excessive corrosion which adversely affects braking or steering chassis |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced marked with chalk |7.1.1 |a| |i|| | 1 |
| Front Horn not working |1.6.2a| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing/chassis leg |2.4.A.3| | 1 |
| Steering component is not secure to the vehicle structure fluid resovoir |2.2.B.1a| | 1 |
| Side repeater not working |1.4.A.2c| | 1 |
| Exhaust has a major leak of exhaust gases catalytic converter missing (6.1.2 (a)) | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1| | 1 |
| Offside Rear Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Front Tie bar/rod attachment bracket/mounting fractured |2.4.G.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering by roll bar mount |6.1.A.1| | 1 |
| Offside Front position lamp|s| not working 501 bulb |1.1.A.3b| | 1 |
| Offside Inner Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Inner Rear Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Inner Rear Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Inner Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Inner Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer and inner sill (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor area |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Arch |2.4.A.3| | 1 |
| Headlamp aim beam image too far to the right |1.6.B4| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill outter (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inside wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inside wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength INSIDE WHEEL ARCH (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced SILL OUTTER (7.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering leg (6.1.1 (c) (ii)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing (6.1.1 (c) (ii)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wing (6.1.1 (c) (ii)) | 1 |
| Nearside Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |