| Most common failures | No# failures |
|---|
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 5262 |
| Windscreen wiper does not clear the windscreen effectively | 4365 |
| Headlamp aim out of alignment | 3827 |
| Registration plate lamp issues | 3212 |
| Brake pipe excessively corroded | 2804 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 1669 |
| Brakes imbalanced across an axle | 1556 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1336 |
| Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 1325 |
| Rear parking brake recording little or no effort | 1221 |
| Registration plate issues | 1017 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 904 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 901 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 860 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 852 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 847 |
| Anti-lock braking system warning lamp indicates an ABS fault | 731 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 726 |
| Parking brake lever has no reserve travel |3.1.6b| | 633 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 581 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 494 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 456 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 455 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 449 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 440 |
| Rear brake disc in such a condition that it is seriously weakened | 428 |
| Offside front brake binding |3.7.B.1| | 420 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits |8.2.1.2 |b|| | 368 |
| Offside Headlamp not working on main beam |1.7.5a| | 343 |
| Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 322 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 318 |
| Nearside front brake binding |3.7.B.1| | 311 |
| Rear brake binding | 294 |
| Front brake application uneven | 293 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 289 |
| Nearside Headlamp not working on main beam |1.7.5a| | 286 |
| Service brake: efficiency below requirements |3.7.B.7| | 284 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 271 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 261 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 258 |
| Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b)) | 245 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 240 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits |8.2.1.2 |c|| | 234 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 233 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 231 |
| Offside Rear brake caliper leaking |3.6.A.1| | 225 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 225 |
| Offside Rear coil spring broken |2.4.C.1a| | 224 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 223 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 217 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 211 |
| Nearside Front Service brake excessively binding (1.2.1 (f)) | 209 |
| Offside Front front brake binding |3.7.B.1| | 208 |
| Offside Rear Coil spring fractured or broken (5.3.1 (b) (i)) | 203 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 200 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer`s specified limits |8.2.1.2 |a|| | 195 |
| Nearside Rear brake caliper leaking |3.6.A.1| | 191 |
| Nearside Front front brake binding |3.7.B.1| | 190 |
| Exhaust carbon monoxide content at idle exceeds manufacturers specified limits (8.2.1.2 (b)) | 189 |
| Brake hose excessively deteriorated | 181 |
| Mechanical brake component has restricted free movement | 169 |
| Front brake disc in such a condition that it is seriously weakened | 159 |
| Offside Stop lamp not working |1.2.1b| | 157 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 156 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 154 |
| Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i)) | 151 |
| Windscreen washer not working | 140 |
| Nearside Rear coil spring broken |2.4.C.1a| | 140 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 140 |
| Offside Rear Braking system leaking |3.6.A.1| | 139 |
| Nearside Rear brake disc excessively pitted |3.5.1h| | 138 |
| Offside Rear brake disc excessively pitted |3.5.1h| | 134 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 131 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 129 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 127 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 127 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 126 |
| Emissions not tested |7.0| | 125 |
| Rear brake application uneven | 123 |
| Offside Front brake disc excessively pitted |3.5.1h| | 115 |
| Windscreen has damage | 114 |
| Nearside Stop lamp not working |1.2.1b| | 114 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 113 |
| Nearside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 109 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 109 |
| Offside Front Headlamp not working on main beam |1.7.5a| | 109 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 108 |
| Nearside Rear Braking system leaking |3.6.A.1| | 107 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 106 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 104 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 102 |
| Windscreen wiper blade insecure | 102 |
| Nearside Front brake disc excessively pitted |3.5.1h| | 102 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 100 |
| Offside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 99 |
| Nearside Front coil spring broken |2.4.C.1a| | 99 |
| Power steering pipe|s| or hose|s| leaking |2.3.3b| | 99 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 98 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 97 |
| Emissions not tested (8.2.1.2 (d)) | 97 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 97 |
| Centre Stop lamp not working |1.2.1b| | 96 |
| Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 94 |
| Offside Rear Parking brake inoperative on one side (1.4.1 (a)) | 94 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 93 |
| Nearside Parking brake inoperative on one side (1.4.1 (a)) | 92 |
| Nearside Rear Parking brake inoperative on one side (1.4.1 (a)) | 91 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 90 |
| Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 89 |
| Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 89 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 88 |
| Offside Parking brake inoperative on one side (1.4.1 (a)) | 85 |
| Rear fog lamp not working |1.3.2b| | 85 |
| Offside Front coil spring broken |2.4.C.1a| | 85 |
| Horn not working (7.7 (a)) | 85 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 84 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 83 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 83 |
| Nearside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 82 |
| Nearside Front Headlamp not working on main beam |1.7.5a| | 82 |
| Nearside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 81 |
| Offside Rear fog lamp not working |1.3.2b| | 80 |
| Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 79 |
| Offside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 79 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 79 |
| Front brake excessively fluctuating | 76 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 74 |
| Horn not working |1.6.2a| | 74 |
| Emissions not tested |7.3.A.1| | 73 |
| Offside Front Position lamp not working |4.2.1 |a|| | 73 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 73 |
| Battery insecure |1.9.1| | 71 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 70 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 69 |
| Offside Front Anti-roll bar linkage insecure |2.4.G.1| | 69 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 68 |
| Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 68 |
| Offside Rear coil spring fractured |2.4.C.1a| | 67 |
| Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 65 |
| Offside Front Service brake excessively binding |1.2.1 |f|| | 65 |
| Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 63 |
| Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 63 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 63 |
| Nearside Front Position lamp not working |4.2.1 |a|| | 62 |
| Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 62 |
| Offside Rear Coil spring fractured or broken |5.3.1 |b| |i|| | 61 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 59 |
| Brake performance not tested |3.7.A.1| | 59 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 59 |
| Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 58 |
| Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 57 |
| Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 57 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 57 |
| Nearside Rear Stop lamp not working |1.2.1b| | 57 |
| Fuel cap/sealing device missing |7.2.4a| | 57 |
| Power steering pipe/hose leaking (2.1.5 (a)) | 56 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 56 |
| Offside Front Anti-roll bar linkage fractured |2.4.G.1| | 56 |
| Nearside Side repeater not working |1.4.A.2c| | 56 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 56 |
| Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 55 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 55 |
| Nearside Front Service brake excessively binding |1.2.1 |f|| | 54 |
| Rear fog lamp tell tale not working |1.3.1b| | 54 |
| Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 53 |
| Brake lever has insufficient reserve travel (1.1.2 (a)) | 53 |
| Offside Windscreen wiper blade deteriorated |8.2.2| | 52 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 52 |
| Offside Steering rack gaiter split |2.2.D.2d| | 52 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 51 |
| Front position lamp|s| not working |1.1.A.3b| | 51 |
| Offside Rear Stop lamp not working |1.2.1b| | 51 |
| Offside Side repeater not working |1.4.A.2c| | 51 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 51 |
| Rear brake disc excessively pitted |3.5.1h| | 50 |
| Supplementary Restraint System warning lamp indicates a fault |5.4.2| | 50 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 49 |
| Emissions unable to be completed (8.2.1.2 (d)) | 48 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 48 |
| Offside Headlamp insecure |1.7.3| | 48 |
| Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 47 |
| Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 47 |
| Front brake disc excessively pitted |3.5.1h| | 47 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 47 |
| Brake fluid warning lamp illuminated |3.6.G.2| | 47 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 46 |
| Exhaust carbon monoxide content at idle exceeds default limits |8.2.1.2 |b|| | 45 |
| Nearside Windscreen wiper blade deteriorated |8.2.2| | 45 |
| Offside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i)) | 45 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 45 |
| Nearside Rear Coil spring fractured or broken |5.3.1 |b| |i|| | 44 |
| Nearside Rear coil spring fractured |2.4.C.1a| | 44 |
| Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 44 |
| Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 43 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 43 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 42 |
| Offside Front Windscreen wiper blade deteriorated |8.2.2| | 42 |
| Offside Rear Lower Suspension arm corroded and seriously weakened |2.4.G.1| | 42 |
| Nearside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i)) | 41 |
| Offside Front Shock absorber has a serious fluid leak |2.7.3| | 41 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 41 |
| Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 41 |
| Supplementary restraint system warning lamp indicates a fault (7.1.6 (a)) | 41 |
| Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 41 |
| Offside Rear fog lamp emits a light other than red |1.3.2e| | 40 |
| Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 40 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 40 |
| Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 39 |
| Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 39 |
| Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 39 |
| Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 38 |
| Service brake efficiency below requirements |1.2.2 |a| |i|| | 38 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 38 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 37 |
| Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 37 |
| Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 37 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 37 |
| Nearside Headlamp insecure |1.7.3| | 37 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 36 |
| Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a)) | 36 |
| Horn not working (7.7 (a) (ii)) | 36 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 36 |
| Nearside Front Anti-roll bar linkage insecure |2.4.G.1| | 36 |
| Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 35 |
| rear parking |secondary| brakes imbalanced | 35 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 35 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 35 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 35 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 34 |
| Nearside Headlamp aim not tested |1.8.A.1c| | 34 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 34 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 34 |
| Main beam `tell-tale` not working |1.7.4c| | 33 |
| Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 33 |
| Oil leaking excessively from engine (8.4.1 (a) (i)) | 33 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 33 |
| Nearside Headlamp lens seriously defective (4.1.1 (b) (ii)) | 33 |
| Power steering component|s| leaking |2.3.3b| | 33 |
| Emissions not tested |8.2.1.2 |d|| | 33 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 33 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 32 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 32 |
| Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 32 |
| Offside Headlamp aim not tested |1.8.A.1c| | 31 |
| Offside Front Coil spring fractured or broken |5.3.1 |b| |i|| | 31 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 31 |
| Brake performance not tested (1.2.1 (g)) | 30 |
| Offside Rear coil spring incomplete |2.4.C.1a| | 30 |
| Rear fog lamp emits a light other than red |1.3.2e| | 30 |
| Offside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 30 |
| Offside Front coil spring fractured |2.4.C.1a| | 30 |
| Offside Parking brake inoperative on one side |1.4.1 |a|| | 30 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 29 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 29 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 29 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 29 |
| Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 29 |
| Exhaust carbon monoxide content at idle exceeds manufacturer`s specified limits |8.2.1.2 |b|| | 29 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 28 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 28 |
| Main beam tell-tale not working (4.9.1 (a) (ii)) | 28 |
| Central Stop lamp(s) not working (4.3.1 (a) (ii)) | 28 |
| Rear Mechanical brake component has restricted free movement | 28 |
| Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 28 |
| Drivers airbag missing (7.1.5 (a)) | 28 |
| Offside Headlamp lens seriously defective (4.1.1 (b) (ii)) | 28 |
| Nearside Rear Lower Suspension arm corroded and seriously weakened |2.4.G.1| | 28 |
| Exhaust catalytic converter missing where one was fitted as standard |7.1.3| | 28 |
| Nearside Side repeater not working (4.4.1 (a) (ii)) | 27 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 27 |
| Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 27 |
| Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 27 |
| Offside Side repeater not working (4.4.1 (a) (ii)) | 27 |
| Offside Front Steering rack gaiter split |2.2.D.2d| | 27 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 27 |
| Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 27 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 27 |
| Rear Exhaust system not adequately supported |7.1.1| | 27 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 27 |
| Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 27 |
| Nearside Headlamp not working on main beam |4.1.1 |a| |ii|| | 27 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 27 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 26 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 26 |
| Nearside Front Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 26 |
| Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 26 |
| Offside Rear Anti-roll bar linkage insecure |2.4.G.1| | 26 |
| Nearside Rear Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 26 |
| Windscreen wiper does not clear the windscreen effectively | 25 |
| Offside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 25 |
| Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 25 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 25 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 25 |
| Offside Front An item not tested |Manual| | 25 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 24 |
| Parking brake lever has excessive movement indicating incorrect adjustment |1.1.6 |c|| | 24 |
| Nearside Rear Hydraulic brake calliper leaking |1.1.16 |b| |i|| | 24 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 24 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 24 |
| Offside Rear Service brake excessively binding |1.2.1 |f|| | 24 |
| Stop lamp not working |1.2.1b| | 24 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 24 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 24 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 24 |
| Offside Rear Hydraulic brake calliper leaking |1.1.16 |b| |i|| | 24 |
| Nearside Rear Parking brake inoperative on one side |1.4.1 |a|| | 24 |
| Brake pedal anti-slip provision incomplete |3.3.A.1b| | 24 |
| Offside Front Headlamp insecure |1.7.3| | 24 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds default limits |8.2.1.2 |b|| | 23 |
| Nearside Front Anti-roll bar linkage fractured |2.4.G.1| | 23 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 23 |
| Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 23 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 23 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 23 |
| Brake pipe leaking |3.6.A.1| | 23 |
| Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 23 |
| Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 23 |
| Offside Front All position lamps not working |1.1.A.3b| | 23 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 23 |
| Power steering component leaking (2.1.5 (a)) | 23 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 23 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 23 |
| Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 23 |
| Nearside Rear Anti-roll bar linkage insecure |2.4.G.1| | 23 |
| front brakes release unevenly |3.7.B.4| | 23 |
| Offside Rear Wheel nut|s| missing |4.2.A.1e| | 23 |
| Offside Rear Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 23 |
| Offside Headlamp light intensity severely reduced (4.1.4 (a)) | 22 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 22 |
| Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 22 |
| Offside Front Shock absorbers has a serious fluid leak | 22 |
| Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 22 |
| Nearside Front position lamp|s| incorrect colour |1.1.A.3e| | 22 |
| Offside Front position lamp|s| incorrect colour |1.1.A.3e| | 22 |
| Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 22 |
| Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 22 |
| Offside Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 21 |
| Nearside Headlamp light intensity severely reduced (4.1.4 (a)) | 21 |
| Rear Parking brake lever has no reserve travel |3.1.6b| | 21 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 21 |
| Nearside Rear Road wheel bead rim badly distorted |4.2.A.1a| | 21 |
| Nearside Front coil spring fractured |2.4.C.1a| | 21 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 21 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a)) | 21 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 21 |
| Nearside Front Shock absorbers has a serious fluid leak | 21 |
| Nearside Rear brake disc excessively scored |3.5.1h| | 21 |
| Offside Rear brake disc excessively scored |3.5.1h| | 21 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 21 |
| Nearside Front Coil spring fractured or broken |5.3.1 |b| |i|| | 21 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 21 |
| Offside rear brake excessively fluctuating |3.7.B.3| | 21 |
| Offside Front brake caliper has restricted free movement |3.5.1k| | 21 |
| Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 21 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 21 |
| Offside Rear Shock absorbers has a serious fluid leak | 20 |
| Offside Headlamp not working on main beam |4.1.1 |a| |ii|| | 20 |
| Offside Rear Parking brake inoperative on one side |1.4.1 |a|| | 20 |
| Offside Front Wheel nut|s| missing |4.2.A.1e| | 20 |
| Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 20 |
| Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 20 |
| Nearside Front Steering rack gaiter split |2.2.D.2d| | 20 |
| Braking system leaking |3.6.A.1| | 20 |
| Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 20 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 20 |
| Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 20 |
| Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 20 |
| Exhaust emissions likely to be affected by an exhaust leak |8.2.1.1 |b|| | 20 |
| Power steering inoperative |2.3.3a| | 20 |
| Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 20 |
| Offside Rear Anti-roll bar linkage fractured |2.4.G.1| | 19 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 19 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 19 |
| Nearside rear brake excessively fluctuating |3.7.B.3| | 19 |
| Central Exhaust has a major leak of exhaust gases |7.1.2| | 19 |
| Nearside Front brake caliper has restricted free movement |3.5.1k| | 19 |
| Centre Rear Stop lamp not working |1.2.1b| | 19 |
| Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 19 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 19 |
| Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 19 |
| Anti-lock braking system warning lamp does not illuminate |3.4.1b| | 19 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 19 |
| Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 19 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 19 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 19 |
| Nearside Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 19 |
| Driver`s seat insecure |6.2.A.1| | 19 |
| Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 19 |
| Nearside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 19 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3| | 18 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 18 |
| Offside front brake juddering severely |3.7.A.2b| | 18 |
| Horn not working |7.7 |a| |ii|| | 18 |
| Nearside Rear Service brake excessively binding |1.2.1 |f|| | 18 |
| Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 18 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 18 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 18 |
| Nearside Parking brake inoperative on one side |1.4.1 |a|| | 18 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 18 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 18 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 18 |
| Offside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 18 |
| Supplementary restraint system warning lamp indicates a fault |7.1.6 |a|| | 18 |
| Headlamp aim out of alignment | 17 |
| Nearside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 17 |
| Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 17 |
| Offside Front brake disc excessively scored |3.5.1h| | 17 |
| Driver`s airbag missing |5.4.1| | 17 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 17 |
| Rear fog lamp missing (4.5.1 (a) (ii)) | 17 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 17 |
| Nearside Front All position lamps not working |1.1.A.3b| | 17 |
| Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 17 |
| Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 17 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 17 |
| Nearside Rear Anti-roll bar linkage fractured |2.4.G.1| | 17 |
| Offside Track rod end ball joint has excessive play |2.2.B.1f| | 17 |
| Nearside Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 17 |
| Fuel cap/sealing device missing (6.1.3 (b) (i)) | 17 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 17 |
| Offside Front Headlamp light intensity severely reduced (4.1.4 (a)) | 16 |
| Offside Front brake caliper leaking |3.6.A.1| | 16 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 16 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 16 |
| Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 16 |
| Offside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 16 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 16 |
| Nearside Rear Shock absorbers has a serious fluid leak | 16 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 16 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 16 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 16 |
| Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 16 |
| Exhaust emissions - engine idle speed too high (8.2.1.2 (e)) | 16 |
| Offside Rear Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 16 |
| front brake binding |3.7.B.1| | 16 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 16 |
| Power steering pipe/hose leaking |2.1.5 |a|| | 16 |
| Nearside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 16 |
| Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 16 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 16 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 16 |
| Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 16 |
| Nearside Front Headlamp light intensity severely reduced (4.1.4 (a)) | 15 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 15 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 15 |
| Offside Front Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 15 |
| Nearside Front brake disc excessively scored |3.5.1h| | 15 |
| Nearside Front Side repeater not working |1.4.A.2c| | 15 |
| Nearside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 15 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 15 |
| Nearside Rear coil spring incomplete |2.4.C.1a| | 15 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 15 |
| Nearside Rear Suspension arm corroded and seriously weakened |2.4.G.1| | 15 |
| Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 15 |
| Central Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 15 |
| Nearside Rear Braking system leaking caliper |3.6.A.1| | 15 |
| Offside Rear Brake pipe leaking |3.6.A.1| | 15 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer`s specified limits |8.2.1.2 |a|| | 15 |
| Fuel cap/sealing device sealing washer missing |7.2.4c| | 15 |
| Offside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 15 |
| Offside Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 15 |
| Rear Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 15 |
| Exhaust system not adequately supported |7.1.1| | 15 |
| Offside Headlamp aim not tested (4.1.2 (b)) | 15 |
| Nearside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 15 |
| Brake hose has insufficient room to move | 14 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 14 |
| Stop lamp(s) all not working (4.3.1 (a) (iii)) | 14 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 14 |
| Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) | 14 |
| Offside Front Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 14 |
| Offside Front Headlamp aim not tested |1.8.A.1c| | 14 |
| Brake lever has insufficient reserve travel |1.1.2 |a|| | 14 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3| | 14 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 14 |
| Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 14 |
| Offside Rear Service brake excessively fluctuating (1.2.1 (e)) | 14 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 14 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 14 |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 14 |
| Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 14 |
| Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 14 |
| Nearside Front Service brake excessively fluctuating (1.2.1 (e)) | 14 |
| Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 14 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 14 |
| Offside Rear fog lamp missing |1.3.2a| | 14 |
| Exhaust emissions exceed manufacturers specified limit (8.2.2.2 (a)) | 14 |
| Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 14 |
| Brake pedal spongy |3.3.B.1b| | 14 |
| Offside Front Hydraulic brake calliper leaking (1.1.16 (b) (i)) | 14 |
| Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 14 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 14 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 14 |
| Offside Rear Braking system leaking caliper |3.6.A.1| | 14 |
| Nearside Front An item not tested |Manual| | 14 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 14 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 14 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 14 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 14 |
| Registration plate lamp issues | 13 |
| Fuel cap/sealing device sealing washer deteriorated |7.2.4c| | 13 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 13 |
| Exhaust engine idle speed too high |7.3.D.1| | 13 |
| Brake hose damaged | 13 |
| Brake pedal creeps down while the pedal is held under pressure |3.3.B.1a| | 13 |
| Brake pedal anti-slip provision missing (1.1.2 (c)) | 13 |
| Offside Front Service brake excessively fluctuating (1.2.1 (e)) | 13 |
| Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 13 |
| Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 13 |
| Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 13 |
| Rear Rear fog lamp not working |1.3.2b| | 13 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 13 |
| Engine MIL inoperative or indicates a malfunction |8.2.1.2 |h|| | 13 |
| Nearside Headlamp light source and lamp not compatible (4.1.4 (c)) | 13 |
| Offside Headlamp light source and lamp not compatible (4.1.4 (c)) | 13 |
| Headlamp not working on dipped beam |1.7.5a| | 13 |
| Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 13 |
| Nearside Rear brake caliper has restricted free movement |3.5.1k| | 13 |
| Brake pedal has insufficient reserve travel (1.1.2 (a)) | 13 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 13 |
| Offside Front Side repeater not working |1.4.A.2c| | 13 |
| Nearside Rear Wheel nut|s| missing |4.2.A.1e| | 13 |
| Nearside Front Service brake lagging in operation (1.2.1 (d)) | 13 |
| Offside Front wheel bearing rough when rotated |2.5.A.2| | 13 |
| Centre Rear Exhaust has a major leak of exhaust gases |7.1.2| | 13 |
| Nearside Front Headlamp insecure |1.7.3| | 13 |
| Nearside Front brake caliper leaking |3.6.A.1| | 13 |
| Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 13 |
| Nearside Front Direction indicator not working |1.4.A.2c| | 13 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 13 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 13 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 12 |
| Fuel cap/sealing device ineffective (6.1.3 (b) (i)) | 12 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 12 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 12 |
| Offside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 12 |
| Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 12 |
| Nearside Front Valve stem seriously damaged (5.2.3 (j)) | 12 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 12 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 12 |
| Power steering inoperative (2.1.5 (c) (i)) | 12 |
| Nearside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 12 |
| Nearside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 12 |
| Brake pedal anti-slip provision missing |3.3.A.1b| | 12 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 12 |
| Nearside Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 12 |
| Nearside Rear wheel bearing has excessive play |2.6.2| | 12 |
| Headlamp aim not tested |1.8.A.1c| | 12 |
| Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 12 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 12 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 12 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 12 |
| Offside Rear position lamp|s| incorrect colour |1.1.A.3e| | 12 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i)) | 12 |
| Anti-lock braking system warning lamp does not illuminate (1.6 (a)) | 12 |
| Nearside Headlamp levelling device inoperative (4.1.5 (a)) | 12 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 12 |
| Rear parking brake recording little or no effort | 11 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 11 |
| Exhaust has part of the system excessively deteriorated |7.1.1a| | 11 |
| Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 11 |
| Nearside Front Headlamp aim not tested |1.8.A.1c| | 11 |
| Front Front position lamp|s| not working |1.1.A.3b| | 11 |
| Offside Front Braking system leaking |3.6.A.1| | 11 |
| Nearside Front Wheel nut|s| missing |4.2.A.1e| | 11 |
| Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 11 |
| Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 11 |
| Rear fog lamp switch inoperative (4.5.3 (a)) | 11 |
| Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 11 |
| Offside Rear brake caliper has restricted free movement |3.5.1k| | 11 |
| Hazard warning switch inoperative (4.4.2 (a) (ii)) | 11 |
| Nearside Front Braking system leaking |3.6.A.1| | 11 |
| Nearside Rear Lower Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 11 |
| Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 11 |
| Nearside Front Brake hose twisted |3.6.B.4c| | 11 |
| Offside rear brake juddering severely |3.7.A.5b| | 11 |
| Nearside Rear Service brake excessively fluctuating (1.2.1 (e)) | 11 |
| Brake performance unable to be tested (1.2.1 (g)) | 11 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 11 |
| Headlamp levelling device inoperative (4.1.5 (a)) | 11 |
| Offside Rear Lower Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 11 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 11 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 11 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 11 |
| Offside Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 11 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 11 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 11 |
| Brake performance not tested |1.2.1 |g|| | 11 |
| Offside Rear Upper Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 11 |
| Offside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 11 |
| Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 11 |
| Nearside rear brake juddering severely |3.7.A.5b| | 11 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i)) | 11 |
| Rear Stop lamp not working |1.2.1b| | 11 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 11 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 11 |
| Nearside Rear Service brake lagging in operation (1.2.1 (d)) | 10 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 10 |
| Rear fog lamp missing |1.3.2a| | 10 |
| Rear fog lamp switch missing |1.3.1a| | 10 |
| Nearside Rear rear brake excessively fluctuating |3.7.B.3| | 10 |
| Nearside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 10 |
| Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 10 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 10 |
| Rear fog lamp not working |4.5.1 |a| |ii|| | 10 |
| Nearside Front Position lamp not working |4.2.1 |a| |ii|| | 10 |
| Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 10 |
| Offside Rear Valve stem seriously damaged |4.1.D.1e| | 10 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 10 |
| Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 10 |
| Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 10 |
| Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 10 |
| Offside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 10 |
| Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 10 |
| Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 10 |
| Central Stop lamp|s| not working |4.3.1 |a| |ii|| | 10 |
| Offside Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 10 |
| Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 10 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 10 |
| Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 10 |
| Offside Rear Rear fog lamp emits a light other than red |1.3.2e| | 10 |
| Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i)) | 10 |
| Offside Front Anti-roll bar fractured |2.4.G.1| | 10 |
| Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 10 |
| Offside Headlamp levelling device inoperative (4.1.5 (a)) | 10 |
| Nearside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 10 |
| Offside Rear Road wheel bead rim badly distorted |4.2.A.1a| | 10 |
| Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b)) | 10 |
| Brake pedal creeps down when held under pressure |3.3.B.1a| | 10 |
| Offside Front Lower Suspension arm corroded and seriously weakened |2.4.G.1| | 10 |
| Nearside Front Front position lamp|s| incorrect colour |1.1.A.3e| | 10 |
| rear brakes release unevenly |3.7.B.4| | 10 |
| Offside Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 10 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 10 |
| Nearside Front Lower Shock absorber has an excessively worn bush |2.7.4| | 10 |
| Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 10 |
| Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 10 |
| Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 10 |
| Nearside Rear Valve stem seriously damaged (5.2.3 (j)) | 10 |
| Brakes imbalanced across an axle | 9 |
| Exhaust catalytic converter missing where one was fitted as standard (8.2.2.1 (a)) | 9 |
| Offside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 9 |
| Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 9 |
| Offside Front Lower Shock absorbers has an excessively worn bush (5.3.2 (c)) | 9 |
| Front Service brake excessively fluctuating (1.2.1 (e)) | 9 |
| Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 9 |
| brake disc excessively pitted |3.5.1h| | 9 |
| Nearside Rear Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 9 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 9 |
| Nearside Rear Valve stem seriously damaged |4.1.D.1e| | 9 |
| Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 9 |
| Nearside Headlamp insecure (4.1.1 (c)) | 9 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 9 |
| Nearside Front coil spring incomplete |2.4.C.1a| | 9 |
| Nearside Rear Exhaust has a major leak of exhaust gases |7.1.2| | 9 |
| Offside Rear Road wheel fixing missing (5.2.1 (a) (i)) | 9 |
| Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 9 |
| Nearside Headlamp aim not tested (4.1.2 (b)) | 9 |
| Offside Front Service brake lagging in operation (1.2.1 (d)) | 9 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 9 |
| Offside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 9 |
| Nearside Inner Front brake disc excessively pitted |3.5.1h| | 9 |
| Offside Inner Front brake disc excessively pitted |3.5.1h| | 9 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 9 |
| Offside Headlamp aim beam image kick up to the offside |1.8| | 9 |
| Direction indicators not working |1.4.A.2c| | 9 |
| Nearside Headlamp aim not tested |4.1.2 |b|| | 9 |
| Offside Rear wheel bearing rough when rotated |2.6.1| | 9 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 9 |
| Nearside Front Road wheel bead rim badly distorted |4.2.A.1a| | 9 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 9 |
| Nearside Front Brake hose excessively damaged |3.6.B.4d| | 9 |
| Nearside Rear Brake pipe leaking |3.6.A.1| | 9 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg (5.3.6 (a) (i)) | 9 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 9 |
| Nearside Rear Direction indicator incorrect colour |1.4.A.2f| | 9 |
| Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 9 |
| Offside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 9 |
| Nearside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 9 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 9 |
| Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 9 |
| Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 9 |
| Offside Front Position lamp not working |4.2.1 |a| |ii|| | 9 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 9 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 9 |
| Offside Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 9 |
| Driver`s airbag missing |7.1.5 |a|| | 9 |
| Nearside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 9 |
| Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 9 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 9 |
| Offside Front Front position lamp|s| incorrect colour |1.1.A.3e| | 9 |
| Windscreen wiper blade deteriorated |8.2.2| | 9 |
| Nearside front brake juddering severely |3.7.A.2b| | 9 |
| Offside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 9 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 9 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 8 |
| Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b)) | 8 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 8 |
| Brake pedal has insufficient reserve movement |3.3.A.5| | 8 |
| Offside Rear rear brake excessively fluctuating |3.7.B.3| | 8 |
| Offside Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 8 |
| Offside Rear Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 8 |
| Offside Rear Upper Suspension arm corroded and seriously weakened |2.4.G.1| | 8 |
| Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 8 |
| Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b)) | 8 |
| Hazard warning switch faulty |1.4.B.1d| | 8 |
| Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 8 |
| Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 8 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 8 |
| Nearside Front Headlamp aim not tested (4.1.2 (b)) | 8 |
| Offside Front Valve stem seriously damaged |4.1.D.1e| | 8 |
| Nearside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
| Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 8 |
| Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 8 |
| Rear Service brake excessively fluctuating |1.2.1 |e|| | 8 |
| Nearside Front Upper Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 8 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 8 |
| Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 8 |
| Nearside Front Side repeater not working (4.4.1 (a) (ii)) | 8 |
| Central Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 8 |
| Offside Front Direction indicator not working |1.4.A.2c| | 8 |
| Nearside Steering rack gaiter insecure |2.2.D.2d| | 8 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 8 |
| Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 8 |
| Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 8 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 8 |
| An item not tested |Manual| | 8 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 8 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 8 |
| Offside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 8 |
| Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 8 |
| Nearside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 8 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 8 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 8 |
| Offside Stop lamp|s| not working |4.3.1 |a| |ii|| | 8 |
| Offside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 8 |
| Nearside Rear Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 8 |
| Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 8 |
| Offside Front Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) | 8 |
| Centre Exhaust system not adequately supported |7.1.1| | 8 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i)) | 8 |
| Nearside Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 8 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 8 |
| Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 8 |
| Offside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 8 |
| Nearside Rear coil spring cracked |2.4.C.1a| | 8 |
| Nearside Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 8 |
| Offside Front coil spring incomplete |2.4.C.1a| | 8 |
| Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.3.D.1| | 8 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 8 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 8 |
| Nearside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 8 |
| Nearside Side repeater missing |1.4.A.2b| | 8 |
| Offside Front Valve stem seriously damaged (5.2.3 (j)) | 8 |
| Nearside Rear wheel bearing rough when rotated |2.6.1| | 8 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i)) | 8 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 8 |
| Offside Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 8 |
| Nearside Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 8 |
| Offside Brake pipe leaking |3.6.A.1| | 8 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 8 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 8 |
| Offside Stop lamp emits other than a steady red light |1.2.1e| | 8 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 8 |
| Offside Rear coil spring cracked |2.4.C.1a| | 8 |
| Rear Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 8 |
| Offside Rear Upper Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 8 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 8 |
| Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 8 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 8 |
| Nearside Headlamp has a product on the lens so that the light output is severely reduced |4.1.4 |b|| | 8 |
| Nearside Rear Road wheel badly damaged |4.2.A.1a| | 8 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 8 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 8 |
| Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 8 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 7 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 7 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 7 |
| Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 7 |
| Parking brake: efficiency below requirements |3.7.D.4| | 7 |
| Offside Rear Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 7 |
| Nearside Front wheel bearing has excessive play |2.5.A.3c| | 7 |
| Nearside Stop lamp|s| not working |4.3.1 |a| |ii|| | 7 |
| Offside Rear fog lamp does not emit a steady red light |1.3.2e| | 7 |
| Headlamp aim not tested (4.1.2 (b)) | 7 |
| Offside Front Road wheel fixing missing |5.2.1 |a| |i|| | 7 |
| Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 7 |
| Upper Stop lamp not working |1.2.1b| | 7 |
| Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 7 |
| Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 7 |
| Offside Front Upper Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 7 |
| Parking (secondary brake) on a single line braking system imbalanced across an axle Axle 1 (1.3.1 (b) (i)) | 7 |
| All direction indicators not working (4.4.1 (a) (ii)) | 7 |
| Offside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii)) | 7 |
| Nearside Front Brake hose excessively twisted (1.1.12 (b) (ii)) | 7 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 7 |
| Offside Front Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) | 7 |
| Offside Seat belt anchorage prescribed area is excessively corroded floor to sill |5.2.6| | 7 |
| Nearside Headlamp aim beam image kick up to the offside |1.8| | 7 |
| Offside Headlamp aim not tested |4.1.2 |b|| | 7 |
| Nearside Front Lower Shock absorbers has an excessively worn bush (5.3.2 (c)) | 7 |
| Rear Brake pipe leaking |3.6.A.1| | 7 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 7 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 7 |
| Offside Rear rear brake juddering severely |3.7.A.5b| | 7 |
| Offside Front wheel bearing has excessive play |2.5.A.3c| | 7 |
| Offside Front Lower Shock absorber has an excessively worn bush |2.7.4| | 7 |
| Hazard warning lamps inoperative |1.4.B.1b| | 7 |
| Offside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 7 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 7 |
| Nearside Front Valve stem seriously damaged |4.1.D.1e| | 7 |
| Front Power steering pipe/hose leaking (2.1.5 (a)) | 7 |
| Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 7 |
| Offside Headlamp adversely affected by the operation of another lamp |1.7.5c| | 7 |
| Nearside Front Headlamp light intensity severely reduced |4.1.4 |a|| | 7 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 7 |
| Nearside Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 7 |
| Fuel cap/sealing device sealing washer torn |7.2.4c| | 7 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 7 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 7 |
| Nearside Rear Upper Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 7 |
| Headlamp not working on main beam |1.7.5a| | 7 |
| Offside Side repeater incorrect colour |1.4.A.2f| | 7 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 7 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 7 |
| Nearside Rear Body has a sharp edge caused by damage |6.1.C.1| | 7 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 7 |
| Offside Front Anti-roll bar linkage fractured |5.3.3 |b| |ii|| | 7 |
| Offside Front Anti-roll bar insecure |2.4.G.1| | 7 |
| Offside Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 7 |
| Nearside Rear Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 7 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 7 |
| Nearside Front Power steering pipe|s| or hose|s| leaking |2.3.3b| | 7 |
| Offside Front Road wheel fixing missing (5.2.1 (a) (i)) | 7 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 7 |
| Central Rear Stop lamp not working |1.2.1b| | 7 |
| Offside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 7 |
| Offside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 7 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 7 |
| Nearside Rear Braking system leaking brake caliper |3.6.A.1| | 7 |
| Nearside Front Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 7 |
| Offside Rear Body has a sharp edge caused by damage |6.1.C.1| | 7 |
| Stop lamp|s| all not working |4.3.1 |a| |iii|| | 7 |
| Nearside Rear Road wheel distorted |4.2.A.1a| | 7 |
| Nearside Headlamp adversely affected by the operation of another lamp |1.7.5c| | 7 |
| Rear rear brake recording little or no effort |3.7.B.5a| | 7 |
| Nearside Rear Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 7 |
| Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 7 |
| Nearside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 7 |
| Brake pipe excessively corroded | 6 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 6 |
| Parking brake: efficiency below requirements (3.7.B.7) | 6 |
| Offside Front Brake hose twisted |3.6.B.4c| | 6 |
| Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b|| | 6 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 6 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 6 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 6 |
| Nearside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 6 |
| Exhaust system insecure (6.1.2 (a)) | 6 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill |6.2.2 |d| |i|| | 6 |
| Offside Front Brake hose excessively damaged |3.6.B.4d| | 6 |
| Rear Service brake excessively fluctuating (1.2.1 (e)) | 6 |
| Front position lamp|s| incorrect colour |1.1.A.3e| | 6 |
| Nearside Front Service brake indicates brake bind |3.7.D.2a| | 6 |
| Power steering fluid level below minimum |2.3.1| | 6 |
| Offside Front Anti-roll bar linkage missing |2.4.G.1| | 6 |
| Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 6 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 6 |
| Windscreen damaged and affecting the drivers view of the road (3.2 (a) (ii)) | 6 |
| Offside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 6 |
| Steering wheel has movement relative to the column indicating looseness (2.2.1 (a) (i)) | 6 |
| Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 6 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 6 |
| Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 6 |
| Fuel tank leaking |7.2.3| | 6 |
| Central Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 6 |
| Centre Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 6 |
| Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii)) | 6 |
| Offside Outer Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 6 |
| All position lamps not working |1.1.A.3b| | 6 |
| Hazard warning lamps inoperative (4.4.1 (e)) | 6 |
| Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 6 |
| Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 6 |
| Nearside Front Hydraulic brake calliper leaking (1.1.16 (b) (i)) | 6 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing |2.4.A.3| | 6 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 6 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 6 |
| Nearside Front Road wheel fixing missing (5.2.1 (a) (i)) | 6 |
| Offside Rear Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 6 |
| Offside Rear Battery insecure |1.9.1| | 6 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 6 |
| Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 6 |
| Nearside Rear position lamp|s| incorrect colour |1.1.A.3e| | 6 |
| Nearside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 6 |
| Exhaust emissions likely to be affected by an exhaust leak |8.2.2.1 |b|| | 6 |
| Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 6 |
| Nearside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 6 |
| Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c)) | 6 |
| Nearside Headlamp aim unable to be tested (4.1.2 (b)) | 6 |
| Nearside Front Shock absorbers has an excessively worn bush (5.3.2 (c)) | 6 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 6 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 6 |
| Battery insecure and likely to cause a short circuit |4.13 |a| |ii|| | 6 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 6 |
| Nearside All position lamps not working |1.1.A.3b| | 6 |
| Offside Headlamp has a product on the lens so that the light output is severely reduced |4.1.4 |b|| | 6 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 6 |
| Nearside Front Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 6 |
| Offside Front Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 6 |
| Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 6 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 6 |
| Nearside Front Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 6 |
| Nearside Rear Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 6 |
| Driver`s airbag obviously defective |5.4.1| | 6 |
| Nearside Front Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) | 6 |
| Offside Obligatory mirror missing |8.1.1| | 6 |
| Rear brake disc excessively scored |3.5.1h| | 6 |
| Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 6 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing |2.4.A.3| | 6 |
| Offside Front Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 6 |
| Nearside Position lamp not working (4.2.1 (a) (ii)) | 6 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 6 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 6 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 6 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 6 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 6 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 6 |
| Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
| Nearside Side repeater incorrect colour |1.4.A.2f| | 6 |
| brake disc in such a condition that it is seriously weakened |3.5.1i| | 6 |
| Nearside Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 6 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 6 |
| Nearside Rear Parking brake lever has no reserve travel |3.1.6b| | 6 |
| Central Stop lamp not working |1.2.1b| | 6 |
| Nearside Front Road wheel distorted |4.2.A.1a| | 6 |
| Front front brake binding |3.7.B.1| | 6 |
| Nearside Power steering pipe|s| or hose|s| leaking |2.3.3b| | 6 |
| Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Nearside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
| Offside Rear Anti-roll bar linkage missing |2.4.G.1| | 6 |
| Offside Rear Parking brake lever has no reserve travel |3.1.6b| | 6 |
| Front Windscreen wiper blade deteriorated |8.2.2| | 6 |
| Exhaust emits excessive dense blue smoke during acceleration |7.3.A.2c| | 6 |
| Nearside Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 6 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 6 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i)) | 6 |
| Offside Outer Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 6 |
| Offside Rear Hydraulic brake calliper leaking and braking performance affected (1.1.16 (b) (ii)) | 6 |
| Offside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b)) | 6 |
| Offside Front Shock absorbers has an excessively worn bush (5.3.2 (c)) | 6 |
| Front Power steering pipe|s| or hose|s| leaking |2.3.3b| | 6 |
| Rear Exhaust has a major leak of exhaust gases joint |7.1.2| | 6 |
| Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 6 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 6 |
| Nearside Outer Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 6 |
| Emissions not tested due to exhaust leak (8.2.1.2 (d)) | 6 |
| Nearside Front Anti-roll bar linkage missing |2.4.G.1| | 6 |
| Offside Rear Braking system leaking Caliper |3.6.A.1| | 6 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 6 |
| Front Body has a sharp edge caused by damage |6.1.C.1| | 6 |
| Nearside Front Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 6 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 5 |
| Offside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 5 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 5 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill |6.2.2 |d| |i|| | 5 |
| Offside Rear Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) | 5 |
| Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 5 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 5 |
| Offside Front Floor excessively deteriorated (6.2.4 (a) (i)) | 5 |
| Offside Front Service brake indicates brake bind |3.7.D.2a| | 5 |
| Offside Front Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 5 |
| Offside Rear Coil spring not correctly located |2.4.C.2| | 5 |
| Nearside Side repeater incorrect colour (4.4.3 (a)) | 5 |
| Offside Rear Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 5 |
| Nearside Rear Road wheel fixing missing |5.2.1 |a| |i|| | 5 |
| Offside Rear Road wheel fixing missing |5.2.1 |a| |i|| | 5 |
| Nearside Front Upper Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 5 |
| Offside Rear Rear fog lamp missing (4.5.1 (a) (ii)) | 5 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 5 |
| Offside Front Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1| | 5 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 5 |
| Offside Position lamp not working |4.2.1 |a|| | 5 |
| Offside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 5 |
| Front passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 5 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 5 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 5 |
| Offside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 5 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 5 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 5 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 5 |
| Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 5 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 5 |
| Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 5 |
| Offside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 5 |
| Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Offside Headlamp insecure (4.1.1 (c)) | 5 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 5 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 5 |
| Emissions not tested (8.2.2.2 (e)) | 5 |
| Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 5 |
| Offside Rear Service brake effort inadequate at a wheel |1.2.1 |a| |i|| | 5 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 5 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 5 |
| Offside Outer Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 5 |
| Offside Rear Direction indicator incorrect colour (4.4.3 (a)) | 5 |
| Offside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 5 |
| Rear fog lamp switch missing (4.5.3 (a)) | 5 |
| Offside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 5 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 5 |
| Rear fog lamp switch faulty |1.3.1a| | 5 |
| Emissions unable to be completed (8.2.2.2 (e)) | 5 |
| Nearside Rear front brake binding |3.7.B.1| | 5 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 5 |
| Offside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 5 |
| Front Brake lining|s| less than 1.5 mm thick |3.5.1g| | 5 |
| Offside Rear Braking system leaking brake caliper |3.6.A.1| | 5 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor |7.1.1 |a| |i|| | 5 |
| Front Headlamp not working on dipped beam |1.7.5a| | 5 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 5 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 5 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 5 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 5 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 5 |
| Offside Front Seat belt webbing significantly weakened (7.1.2 (b) (ii)) | 5 |
| Central Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 5 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i)) | 5 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 5 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 5 |
| Horn control missing |1.6.1| | 5 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i)) | 5 |
| Rear Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 5 |
| Nearside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Brake pipe leaking on a hydraulic braking system front to rear (1.1.11 (b) (ii)) | 5 |
| Service brake: efficiency below requirements |3.7.D.4| | 5 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 5 |
| Offside Front Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 5 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 5 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 5 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 5 |
| Fuel cap/sealing device missing |6.1.3 |b| |i|| | 5 |
| Offside Front Suspension arm corroded and seriously weakened |2.4.G.1| | 5 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 5 |
| Nearside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 5 |
| Exhaust catalytic converter missing where one was fitted as standard |8.2.1.1 |a|| | 5 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i|| | 5 |
| Offside Front Lower Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 5 |
| Nearside Front Lower Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 5 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 5 |
| Offside Rear Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 5 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 5 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 5 |
| Nearside Front Road wheel badly damaged |4.2.A.1a| | 5 |
| Offside Rear Rear wheel bearing has excessive play |2.6.2| | 5 |
| Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 5 |
| Offside Rear Body panel corroded and likely to cause injury (6.2.1 (a) (i)) | 5 |
| Nearside Front Lower Suspension arm corroded and seriously weakened |2.4.G.1| | 5 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 5 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 5 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 5 |
| Steering system excessively rough |2.2.D.1| | 5 |
| Power steering malfunctioning |2.3.3a| | 5 |
| Nearside Front Coil spring not correctly located |2.4.C.2| | 5 |
| Offside Front Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 5 |
| Nearside Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 5 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 5 |
| Rear Exhaust system insecure (6.1.2 (a)) | 5 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 5 |
| Offside Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 5 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 5 |
| Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 5 |
| Offside Rear Road wheel badly damaged |4.2.A.1a| | 5 |
| Nearside Outer Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 5 |
| Offside Rear Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 5 |
| Nearside Front Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 5 |
| Nearside front brake recording little or no effort |3.7.B.5a| | 5 |
| Offside Rear Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 5 |
| Rear fog lamp does not emit a steady red light |1.3.2e| | 5 |
| Brake fluid contaminated |1.8 |a|| | 5 |
| Nearside Body has a sharp edge caused by damage |6.1.C.1| | 5 |
| Offside Rear position lamp|s| incomplete |1.1.4a| | 5 |
| Rear Exhaust system insecure |6.1.2 |a|| | 5 |
| Nearside Stop lamp emits other than a steady red light |1.2.1e| | 5 |
| Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Offside Front Brake hose excessively twisted (1.1.12 (b) (ii)) | 5 |
| Offside Rear Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 5 |
| Service brake: efficiency below requirements |3.7.C.1a| | 5 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 5 |
| Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 5 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 5 |
| Offside Rear Service brake lagging in operation (1.2.1 (d)) | 5 |
| Parking brake: efficiency below requirements |3.7.B.7| | 4 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 4 |
| Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 4 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 4 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 4 |
| Registration plate issues | 4 |
| Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 4 |
| Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 4 |
| Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 4 |
| Nearside Front Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 4 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6| | 4 |
| Nearside Rear Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) | 4 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 4 |
| Offside Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 4 |
| Brake pipe leaking front to rear |3.6.A.1| | 4 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i)) | 4 |
| Offside Rear Anti-roll bar ball joint excessively worn |5.3.4 |a| |i|| | 4 |
| Offside Rear Shock absorber has negligible damping effect |2.7.5| | 4 |
| Nearside Rear Coil spring not correctly located |2.4.C.2| | 4 |
| Nearside Rear Position lamp not working |4.2.1 |a|| | 4 |
| Offside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 4 |
| Offside Side repeater incorrect colour (4.4.3 (a)) | 4 |
| Offside Front Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 4 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill (7.1.1 (a) (i)) | 4 |
| Nearside Rear Parking |secondary brake| on a single line braking system has inadequate effort at a wheel |1.3.1 |a| |i|| | 4 |
| Headlamp switch faulty |1.7.1| | 4 |
| Rear Rear fog lamp missing |1.3.2a| | 4 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 4 |
| Nearside Front Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 4 |
| Rear fog lamp adversely affected by the operation of another lamp (4.5.4 (b)) | 4 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i)) | 4 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 4 |
| Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b| | 4 |
| Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 4 |
| Headlamp aim unable to be tested (4.1.2 (b)) | 4 |
| Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 4 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 4 |
| Drivers seat insecure (6.2.5 (a) (ii)) | 4 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 4 |
| Nearside Front Power steering pipe/hose leaking (2.1.5 (a)) | 4 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 4 |
| Nearside Front Headlamp aim unable to be tested (4.1.2 (b)) | 4 |
| Rear fog lamp insecure |1.3.2a| | 4 |
| Nearside Rear Shock absorbers has negligible damping effect (5.3.2 (d)) | 4 |
| Rear Exhaust has a major leak of exhaust gases box (6.1.2 (a)) | 4 |
| Offside Front Suspension component mounting prescribed area is fractured |2.4.A.3| | 4 |
| Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 4 |
| Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
| Nearside Front Service brake grabbing severely (1.2.1 (c)) | 4 |
| Offside Front Headlamp aim beam image kick up to the offside |1.8| | 4 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 4 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 4 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 4 |
| Front brake disc excessively scored |3.5.1h| | 4 |
| Central Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 4 |
| Offside Rear fog lamp missing (4.5.1 (a) (ii)) | 4 |
| Offside Rear front brake binding |3.7.B.1| | 4 |
| Nearside Front Anti-roll bar linkage fractured (5.3.3 (b) (ii)) | 4 |
| Bonnet cannot be secured in the closed position (3.1 (b) (i)) | 4 |
| Offside Front Position lamp not working side light (4.2.1 (a) (ii)) | 4 |
| Nearside Front Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 4 |
| Exhaust catalytic converter obviously defective (8.2.1.1 (a)) | 4 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.1 |c| |ii|| | 4 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 4 |
| Headlamp light intensity severely reduced both (4.1.4 (a)) | 4 |
| Centre Rear fog lamp not working |1.3.2b| | 4 |
| Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 4 |
| rear brake recording little or no effort |3.7.B.5a| | 4 |
| Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 4 |
| Nearside Front Anti-roll bar insecure |2.4.G.1| | 4 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 4 |
| Offside Front Headlamp aim not tested (4.1.2 (b)) | 4 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i)) | 4 |
| Nearside Rear Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 4 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 4 |
| Offside Position lamp not working (4.2.1 (a) (ii)) | 4 |
| Exhaust emits visible black smoke at idle (8.2.1.2 (f)) | 4 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 4 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 4 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 4 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 4 |
| Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 4 |
| Offside Rear Valve stem seriously damaged (5.2.3 (j)) | 4 |
| Offside Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 4 |
| Nearside Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 4 |
| Nearside Rear Hydraulic brake calliper leaking and braking performance affected (1.1.16 (b) (ii)) | 4 |
| Nearside Front suspension has a suspension upper ball joint securing nut not locked |2.5.B.1a| | 4 |
| Brake hydraulic reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 4 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 4 |
| Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 4 |
| Nearside Front Direction indicators not working |1.4.A.2c| | 4 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii)) | 4 |
| Offside Rear Anti-roll bar fractured |2.4.G.1| | 4 |
| Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 4 |
| Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 4 |
| Hazard warning switch insecure |1.4.B.1d| | 4 |
| Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 4 |
| Nearside Rear Rear position lamp|s| incomplete |1.1.4a| | 4 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 4 |
| Centre Parking brake lever has no reserve travel |3.1.6b| | 4 |
| Offside Front Headlamp adversely affected by the operation of another lamp |1.7.5c| | 4 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |8.1.1 |a|| | 4 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 4 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 4 |
| Nearside Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 4 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6| | 4 |
| Offside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Central Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 4 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 4 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 4 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 4 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 4 |
| Nearside Front Service brake excessively fluctuating |1.2.1 |e|| | 4 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 4 |
| Nearside Rear Anti-roll bar insecure |2.4.G.1| | 4 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 4 |
| Front Undertray likely to become detached (6.2.1 (a) (ii)) | 4 |
| Nearside Rear Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 4 |
| Power steering malfunctioning (2.1.5 (a)) | 4 |
| Nearside Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 4 |
| Offside Front Headlamp insecure (4.1.1 (c)) | 4 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 4 |
| Offside Front Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 4 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 4 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i)) | 4 |
| Offside Side repeater insecure |1.4.A.2b| | 4 |
| Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Nearside Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 4 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 4 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 4 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Front Brake pipe leaking |3.6.A.1| | 4 |
| Nearside Front Headlamp not in good working order |not working| |1.2.4a| | 4 |
| Rear Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 4 |
| Offside Front front brake grabbing severely |3.7.A.2b| | 4 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 4 |
| Offside Parking brake lever has no reserve travel |3.1.6b| | 4 |
| Offside Front Anti-roll bar linkage severely distorted |2.4.G.1| | 4 |
| Offside Rear Body has a sharp edge caused by corrosion Wheel arch |6.1.C.1| | 4 |
| Offside Front Headlamp has a product on the lens so that the light output is severely reduced |4.1.4 |b|| | 4 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 4 |
| Offside Seat belt anchorage prescribed area is excessively corroded floor pan |5.2.6| | 4 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 4 |
| Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 4 |
| Central Exhaust emissions likely to be affected by an exhaust leak |8.2.1.1 |b|| | 4 |
| Brake pedal anti-slip provision worn smooth (1.1.2 (c)) | 4 |
| Front Service brake excessively fluctuating |1.2.1 |e|| | 4 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail |5.3.6 |a| |i|| | 4 |
| Fuel cap/sealing device ineffective |6.1.3 |b| |i|| | 4 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6| | 4 |
| Rear Upper Stop lamp not working |1.2.1b| | 4 |
| Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 4 |
| Nearside Inner Rear Road wheel bead rim badly distorted |4.2.A.1a| | 4 |
| Nearside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 4 |
| Offside Front Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 4 |
| Nearside Rear Outer Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i)) | 4 |
| Nearside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b)) | 4 |
| Offside Front Anti-roll bar linkage likely to become detached (5.3.3 (a) (ii)) | 4 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 4 |
| Oil leaking excessively from engine |8.4.1 |a| |i|| | 4 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 4 |
| Front Headlamp not working on main beam |1.7.5a| | 4 |
| Power steering fluid reservoir empty (2.1.5 (b) (ii)) | 4 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail (5.3.6 (a) (i)) | 4 |
| rear brake excessively fluctuating |3.7.B.3| | 4 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 4 |
| Offside Rear Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 4 |
| Offside Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 4 |
| Nearside Rear Exhaust system not adequately supported |7.1.1| | 4 |
| Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i)) | 4 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg (5.3.6 (a) (i)) | 4 |
| Horn sounds harsh or grating |1.6.2e| | 4 |
| Offside Parking brake recording little or no effort |3.7.D.3a| | 4 |
| Rear Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 4 |
| Power steering pump drive system defective |2.3.6| | 4 |
| Nearside front brake grabbing severely |3.7.A.2b| | 4 |
| Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i)) | 4 |
| Nearside Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 4 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 4 |
| Offside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 4 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 4 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 4 |
| Nearside Rear Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 4 |
| Offside Rear Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Nearside Rear Upper Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 4 |
| Nearside Front Steering system fouling |2.2.D.2a| | 4 |
| Nearside Rear Road wheel fixing missing (5.2.1 (a) (i)) | 4 |
| Nearside Front Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 4 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3) | 4 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill panel (7.1.1 (a) (i)) | 3 |
| Nearside Passenger`s seat insecure |6.2.A.1| | 3 |
| Nearside Front Anti-roll bar fractured |2.4.G.1| | 3 |
| Offside Rear Wheel bearing rough when rotated |5.1.3 |b| |i|| | 3 |
| Offside Rear fog lamp does not emit a steady red light |4.5.4 |a|| | 3 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 3 |
| Windscreen washer not working | 3 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 3 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 3 |
| Nearside Front Service brake excessively binding (1.2.1 (f)) | 3 |
| Offside Front Coil spring fractured or broken (5.3.1 (b) (i)) | 3 |
| Oil leaking excessively from engine (8.4.1 (a) (i)) | 3 |
| Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i)) | 3 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 3 |
| Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 3 |
| Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 3 |
| Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 3 |
| Headlamp aim not tested |4.1.2 |b|| | 3 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 3 |
| Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 3 |
| Nearside Front Lower Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 3 |
| Offside Front Anti-roll bar linkage insecurely attached |5.3.3 |a| |i|| | 3 |
| Offside rear brake grabbing severely |3.7.A.5b| | 3 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6| | 3 |
| Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
| Nearside Front Headlamp insecure (4.1.1 (c)) | 3 |
| Nearside Front Upper Coil spring fractured or broken (5.3.1 (b) (i)) | 3 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 3 |
| Nearside Rear Brake cable has restricted free movement |3.5.1k| | 3 |
| Offside Front brake disc has restricted free movement |3.5.1j| | 3 |
| Nearside Rear Floor excessively deteriorated (6.2.4 (a) (i)) | 3 |
| Offside Front Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Nearside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 3 |
| Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen |3.5 |a|| | 3 |
| Offside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 3 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor (6.2.2 (d) (i)) | 3 |
| Front Brake lining(s) less than 1.5 mm thick (1.1.13 (a) (ii)) | 3 |
| Exhaust has a major leak of exhaust gases centre (6.1.2 (a)) | 3 |
| Nearside Front Upper Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 3 |
| Offside Rear Rear fog lamp does not emit a steady red light |1.3.2e| | 3 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 3 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 3 |
| Central Upper Stop lamp(s) not working (4.3.1 (a) (ii)) | 3 |
| Brake master cylinder leaking (1.1.10 (b) (ii)) | 3 |
| Position lamp not working all (4.2.1 (a) (ii)) | 3 |
| Battery insecure and likely to fall from carrier |4.13 |a| |ii|| | 3 |
| Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 3 |
| Drivers door cannot be opened from outside the vehicle (6.2.3 (a)) | 3 |
| Offside Rear Rear fog lamp missing |1.3.2a| | 3 |
| Nearside Front Road wheel fixing missing |5.2.1 |a| |i|| | 3 |
| Rear fog lamp tell-tale missing (4.9.1 (a) (ii)) | 3 |
| Steering wheel retaining device insecure |2.1.6| | 3 |
| Rear Brake pipe inadequately clipped |3.6.B.1| | 3 |
| Rear brake excessively fluctuating | 3 |
| Rear Exhaust has a major leak of exhaust gases silencer (6.1.2 (a)) | 3 |
| Front Headlamp aim unable to be tested (4.1.2 (b)) | 3 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 3 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 3 |
| Offside front parking brake recording little or no effort |3.7.B.6a| | 3 |
| Central Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 3 |
| Offside Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) | 3 |
| Nearside Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 3 |
| Offside Front Body has a sharp edge caused by damage |6.1.C.1| | 3 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 3 |
| Offside Headlamp aim unable to be tested (4.1.2 (b)) | 3 |
| Offside Front Side repeater not working (4.4.1 (a) (ii)) | 3 |
| Offside Front Seat belt buckle not functioning as intended (7.1.2 (d)) | 3 |
| Offside Front Position lamp missing (4.2.1 (a) (ii)) | 3 |
| Offside Rear brake caliper leaking (3.6.A.1) | 3 |
| Rear Exhaust has a major leak of exhaust gases silencer |7.1.2| | 3 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i)) | 3 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i)) | 3 |
| Nearside Front Position lamp missing (4.2.1 (a) (ii)) | 3 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 3 |
| Offside Rear Direction indicator not working |1.4.A.2c| | 3 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner arch |2.4.A.3| | 3 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg (5.3.6 (a) (i)) | 3 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 3 |
| Offside Rear Brake hose leaking |3.6.A.1| | 3 |
| Central Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b)) | 3 |
| Offside Rear Service brake grabbing severely (1.2.1 (c)) | 3 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 3 |
| Offside Rear Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 3 |
| Offside Side repeater missing (4.4.1 (a) (ii)) | 3 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 3 |
| Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
| Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 3 |
| Nearside Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) | 3 |
| Rear Brake lining|s| less than 1.5 mm thick |3.5.1g| | 3 |
| Offside Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 3 |
| Steering wheel rim fractured (2.2.1 (c) (i)) | 3 |
| Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
| Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 3 |
| Emissions unable to be completed exhaust leak (8.2.1.2 (d)) | 3 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i)) | 3 |
| Nearside Front Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 3 |
| Offside Front Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 3 |
| Seat belt anchorage prescribed area is excessively corroded both rear outer sills |5.2.6| | 3 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 3 |
| Offside Rear Shock absorbers has negligible damping effect (5.3.2 (d)) | 3 |
| Power steering pipe/hose excessively corroded (2.1.5 (g) (i)) | 3 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i)) | 3 |
| Offside Front front brake recording little or no effort |3.7.B.5a| | 3 |
| Offside Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 3 |
| Nearside Rear Upper Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 3 |
| Horn sound not in accordance with requirements (7.7 (c)) | 3 |
| Nearside Front brake disc has restricted free movement |3.5.1j| | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 3 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i)) | 3 |
| Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Main beam tell-tale not working |4.9.1 |a| |ii|| | 3 |
| Rear Braking system leaking |3.6.A.1| | 3 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 3 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 3 |
| Nearside Front Brake hose excessively damaged (1.1.12 (b) (ii)) | 3 |
| Nearside Front Lower Suspension arm locating pin retaining device not properly locked |2.4.G.3b| | 3 |
| Offside Rear Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 3 |
| Nearside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 3 |
| Power steering fluid reservoir empty |2.1.5 |b| |ii|| | 3 |
| Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g)) | 3 |
| Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 3 |
| Exhaust has a major leak of exhaust gases rear box (6.1.2 (a)) | 3 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 3 |
| Rear Exhaust has a major leak of exhaust gases back box (6.1.2 (a)) | 3 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 3 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 3 |
| Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 3 |
| Nearside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 3 |
| Seat belt anchorage prescribed area is excessively corroded offside inner sill |5.2.6| | 3 |
| Exhaust emits clearly visible black smoke during acceleration (8.2.1.2 (g)) | 3 |
| Nearside Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 3 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under sill (7.1.1 (a) (i)) | 3 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 3 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 3 |
| Nearside Rear rear brake juddering severely |3.7.A.5b| | 3 |
| Nearside Rear Body has a projection caused by corrosion |6.1.C.1| | 3 |
| Rear Rear fog lamp emits a light other than red |1.3.2e| | 3 |
| Nearside Outer Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Nearside Headlamp flickers when tapped lightly by hand |1.2.4c| | 3 |
| Offside Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 3 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 3 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 3 |
| Front Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c)) | 3 |
| Nearside Rear Sub-frame attachment bracket/mounting bolt missing |2.4.G.1| | 3 |
| Offside Rear Sub-frame attachment bracket/mounting bolt missing |2.4.G.1| | 3 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 3 |
| Offside Front Service brake excessively fluctuating |1.2.1 |e|| | 3 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 3 |
| Exhaust emissions likely to be affected by an induction leak (8.2.1.1 (b)) | 3 |
| Nearside Rear Stop lamp emits other than a steady red light |1.2.1e| | 3 |
| Nearside Front front brake juddering severely |3.7.A.2b| | 3 |
| Offside Front front brake juddering severely |3.7.A.2b| | 3 |
| Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Brake fluid contaminated (1.8 (a)) | 3 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 3 |
| Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Front Seat belt webbing significantly weakened (7.1.2 (b) (ii)) | 3 |
| Body has a sharp edge caused by damage |6.1.C.1| | 3 |
| Nearside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 3 |
| Offside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i)) | 3 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 3 |
| Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Rear Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
| Offside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 3 |
| Nearside Rear Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 3 |
| Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 3 |
| Nearside Front Anti-roll bar locating pin insecure |2.4.G.3a| | 3 |
| Nearside Outer Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 3 |
| Front Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 3 |
| Nearside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 3 |
| Nearside Front front brake recording little or no effort |3.7.B.5a| | 3 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 3 |
| Steering system fouling |2.2.D.2a| | 3 |
| Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Headlamp does not operate immediately when selected on main beam |1.7.4a| | 3 |
| Nearside Braking system leaking |3.6.A.1| | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 3 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 3 |
| Nearside Rear Direction indicators incorrect colour |1.4.A.2f| | 3 |
| Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 3 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 3 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 3 |
| Front position lamp|s| not working both |1.1.A.3b| | 3 |
| Nearside Front Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 3 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floor to sill |5.2.6| | 3 |
| Power steering pump leaking from a failed component |2.3.3b| | 3 |
| Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 3 |
| Offside Front Lower Ball joint has excessive play |2.2.B.1f| | 3 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 3 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i)) | 3 |
| Offside Front Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 3 |
| Steering wheel locking device insecure |2.1.6| | 3 |
| Steering column movement between the shaft and steering wheel |2.1.2b| | 3 |
| Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 3 |
| Nearside Rear Brake lining|s| less than 1.5 mm thick |3.5.1g| | 3 |
| Centre Brake pipe leaking |3.6.A.1| | 3 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 3 |
| Front front brake juddering severely |3.7.A.2b| | 3 |
| Nearside Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 3 |
| Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 3 |
| Drivers view of the road through the swept area of the windscreen materially affected by an obstruction (3.1 (a) (ii)) | 3 |
| Offside Rear brake disc contaminated by brake fluid |3.5.1h| | 3 |
| Passenger`s seat insecure |6.2.A.1| | 3 |
| Nearside Front Steering locking device missing |2.2.C.1g| | 3 |
| Offside Front coil spring cracked |2.4.C.1a| | 3 |
| Offside Front Headlamp not in good working order |not working| |1.2.4a| | 3 |
| Nearside Front Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Nearside Front Passenger`s seat insecure |6.2.A.1| | 3 |
| Front Power steering component|s| leaking |2.3.3b| | 3 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 3 |
| Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 3 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 3 |
| Offside Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 3 |
| Rear Exhaust mounting missing |7.1.1b| | 3 |
| Offside Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 3 |
| Nearside Front Seat belt retracting mechanism defective |5.2.5b| | 3 |
| Offside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 3 |
| Offside Rear Position lamp not working |4.2.1 |a|| | 3 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill holed |5.2.6| | 3 |
| Offside Front Wheel nut|s| loose |4.2.A.1e| | 3 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 3 |
| front brake juddering severely |3.7.A.2b| | 3 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 3 |
| Power steering component leaking |2.1.5 |a|| | 3 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 3 |
| Service brake efficiency less than 50% of the required value |1.2.2 |a| |ii|| | 3 |
| Nearside Rear Service brake effort inadequate at a wheel |1.2.1 |a| |i|| | 3 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 3 |
| Nearside Front Brake hose leaking |3.6.A.1| | 3 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis |2.4.A.3| | 3 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 3 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 3 |
| Offside Front Road wheel bead rim badly distorted |4.2.A.1a| | 3 |
| Offside front brake grabbing severely |3.7.A.2b| | 3 |
| Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 3 |
| Nearside Front Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 3 |
| Offside Front Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 3 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mounting |2.4.A.3| | 3 |
| Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 3 |
| Nearside Front Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail |5.3.6 |a| |i|| | 3 |
| Nearside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) | 3 |
| Nearside Rear Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 3 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 3 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 3 |
| Offside brake caliper leaking |3.6.A.1| | 3 |
| Nearside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
| Offside Rear Upper Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 3 |
| Offside Front Coil spring not correctly located |2.4.C.2| | 3 |
| Front Braking system leaking |3.6.A.1| | 3 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 3 |
| Offside Front Headlamp light intensity severely reduced |4.1.4 |a|| | 3 |
| Nearside Rear Road wheel cracked |4.2.A.1a| | 3 |
| Exhaust has a part missing |7.1.1a| | 3 |
| Nearside Headlamp not in good working order |not working| |1.2.4a| | 3 |
| Rear Wheel nut|s| missing |4.2.A.1e| | 3 |
| Front Wheel nut|s| missing |4.2.A.1e| | 3 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 3 |
| Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
| Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
| Nearside Front Side repeater missing |1.4.A.2b| | 3 |
| Nearside Rear Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 3 |
| Brake master cylinder fluid level below minimum level |3.6.G.1e| | 3 |
| Windscreen damaged and affecting the driver`s view of the road |3.2 |a| |ii|| | 3 |
| Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) | 3 |
| Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 3 |
| Offside Headlamp incorrect colour |1.7.5b| | 3 |
| Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened |5.3.3 |b| |i|| | 3 |
| Offside Headlamp lens seriously defective |4.1.1 |b| |ii|| | 3 |
| Offside Front Headlamp does not operate immediately when selected on main beam |1.7.4a| | 3 |
| Rear Brake cable insecure | 3 |
| Rear Exhaust silencer insecure (8.1.1 (b) (i)) | 3 |
| Nearside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 3 |
| Nearside Rear Upper Suspension arm corroded and seriously weakened |2.4.G.1| | 3 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii)) | 3 |
| Nearside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 3 |
| Nearside Rear Wheel bearing rough when rotated |5.1.3 |b| |i|| | 3 |
| Nearside Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 3 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer Sill (5.3.6 (a) (i)) | 3 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 3 |
| Offside Rear Anti-roll bar linkage inappropriately repaired |2.4.A.2| | 3 |
| Brake master cylinder leaking hydraulic fluid |3.6.G.1f| | 3 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Nearside Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 3 |
| Offside Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 3 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 3 |
| Nearside Outer Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Power steering pipe/hose excessively corroded |2.1.5 |g| |i|| | 3 |
| Offside Side repeater not working |4.4.1 |a| |ii|| | 3 |
| Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 3 |
| Nearside Rear Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 3 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 3 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 3 |
| Nearside Rear Braking system leaking Caliper |3.6.A.1| | 3 |
| Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail (5.3.6 (a) (i)) | 3 |
| Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 3 |
| Fuel cap/sealing device mounting flange/sealing method defective |7.2.4c| | 3 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 3 |
| Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 3 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 3 |
| Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 3 |
| Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 3 |
| Centre Front Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 3 |
| Offside Rear Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 3 |
| Nearside Rear Direction indicator not working |1.4.A.2c| | 3 |
| Offside Front Headlamp aim not tested |4.1.2 |b|| | 3 |
| Centre Obligatory mirror missing |8.1.1| | 3 |
| Offside Rear Subframe mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 3 |
| Offside Rear Anti-roll bar linkage fractured (5.3.3 (b) (ii)) | 3 |
| Offside Front Brake hose damaged and likely to fail (1.1.12 (a)) | 3 |
| Offside Rear Anti-roll bar linkage ball joint likely to become detached |5.3.4 |a| |ii|| | 3 |
| Nearside Front Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) | 3 |
| Offside Front Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 3 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 3 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 3 |
| Central Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b)) | 3 |
| Nearside Outer Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Front Headlamp levelling device inoperative (4.1.5 (a)) | 3 |
| Nearside Headlamp not working on dipped beam (1.7.5a) | 3 |
| Nearside Position lamp not working |4.2.1 |a|| | 3 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill |7.1.1 |a| |i|| | 3 |
| Nearside Headlamps matched pair are incorrectly positioned |1.7.3| | 3 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i)) | 3 |
| Nearside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering (6.1.1 (a) (ii)) | 3 |
| Nearside Front Position lamp light intensity significantly reduced |4.2.3 |a| |ii|| | 3 |
| Nearside Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 3 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired chassis |2.4.A.3| | 3 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 3 |
| Front Exhaust system not adequately supported |7.1.1| | 3 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded anti roll bar |2.4.A.3| | 3 |
| Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar |2.4.A.3| | 3 |
| Nearside Front Shock absorber has an excessively worn bush |2.7.4| | 3 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 3 |
| Nearside Front Headlamp levelling device inoperative (4.1.5 (a)) | 3 |
| Nearside Parking brake lever has no reserve travel |3.1.6b| | 3 |
| Offside Outer Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 3 |
| Front brake disc in such a condition that it is seriously weakened | 2 |
| Rear brake disc in such a condition that it is seriously weakened | 2 |
| Parking brake lever has no reserve travel |3.1.6b| | 2 |
| Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 2 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Offside Rear fog lamp not working (1.3.2b) | 2 |
| Brake pedal anti-slip provision missing (1.1.2 (c)) | 2 |
| Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 2 |
| Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 2 |
| Offside Side repeater not working (4.4.1 (a) (ii)) | 2 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
| Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 2 |
| Nearside Front Obligatory mirror insecure (3.3 (b) (ii)) | 2 |
| Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Exhaust carbon monoxide content at idle exceeds manufacturers specified limits (8.2.1.2 (b)) | 2 |
| Nearside Front Shock absorbers has a serious fluid leak | 2 |
| Rear fog lamp obviously incorrectly positioned (4.5.4 (a)) | 2 |
| Central Front Oil leaking excessively from engine (8.4.1 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill area |5.3.6 |a| |i|| | 2 |
| Nearside Side repeater light intensity significantly reduced (4.4.3 (a)) | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded Inner sill |5.2.6| | 2 |
| Offside Front Road wheel fractured |4.2.B.1a| | 2 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 2 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 2 |
| Brake fluid not visible (1.1.10 (d) (iii)) | 2 |
| Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 2 |
| Nearside Front passenger door cannot be opened from inside the vehicle (6.2.3 (a)) | 2 |
| Offside Rear Brake hose excessively twisted (1.1.12 (b) (ii)) | 2 |
| Offside Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 2 |
| Exhaust has a major leak of exhaust gases middle section |7.1.2| | 2 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 2 |
| Offside Front Anti-roll bar linkage has excessive play in a ball joint broken |2.4.G.2| | 2 |
| Central Front Power steering pipe/hose leaking (2.1.5 (a)) | 2 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 2 |
| Nearside Rear Seat belt anchorage prescribed area is fractured |5.2.6| | 2 |
| Power steering inoperative and steering adversely affected |2.1.5 |c| |ii|| | 2 |
| Offside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 2 |
| Nearside Front Anti-roll bar ball joint likely to become detached |5.3.4 |a| |ii|| | 2 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 2 |
| Rear Brake lining(s) less than 1.5 mm thick (1.1.13 (a) (ii)) | 2 |
| Exhaust has a major leak of exhaust gases centre joint (6.1.2 (a)) | 2 |
| Offside rear brakes release unevenly |3.7.B.4| | 2 |
| Nearside Front Anti-roll bar linkage fractured |5.3.3 |b| |ii|| | 2 |
| Nearside Rear Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i)) | 2 |
| Offside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 2 |
| Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt split (5.3.4 (b) (ii)) | 2 |
| Nearside Front Lower Suspension arm locating pin locking device missing |2.4.G.3b| | 2 |
| Offside Rear Lower Suspension arm insecurely attached (5.3.3 (a) (i)) | 2 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i)) | 2 |
| Front Exhaust mounting missing |7.1.1b| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 2 |
| Offside Obligatory mirror missing |3.3 |a|| | 2 |
| Nearside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
| Nearside Rear Brake lever has restricted free movement |3.5.1k| | 2 |
| Nearside Front Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) | 2 |
| Offside Front Upper Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Rear brake caliper securing device excessively deteriorated |3.5.1j| | 2 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Nearside rear parking |secondary| brake grabbing severely |3.7.B.6b| | 2 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded Sill. |5.2.6| | 2 |
| Rear Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 2 |
| Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
| Steering wheel spokes loose (2.2.1 (c) (i)) | 2 |
| Centre Rear Upper Stop lamp not working |1.2.1b| | 2 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner cill (6.1.1 (c) (i)) | 2 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt split (2.1.3 (g) (ii)) | 2 |
| Nearside Front Direction indicator light intensity significantly reduced (4.4.3 (a)) | 2 |
| Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Rear fog lamp switch not operating in accordance with the requirements no warning light (4.5.3 (a)) | 2 |
| Nearside Front Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 2 |
| Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Front Body has a projection caused by corrosion |6.1.C.1| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 2 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 2 |
| Rear Exhaust has a major leak of exhaust gases backbox (6.1.2 (a)) | 2 |
| Offside Indicator tell tale inoperative |1.4.A.2a| | 2 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing (6.2.2 (d) (i)) | 2 |
| Nearside Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 2 |
| Speedometer clearly inoperative (7.8 (b) (ii)) | 2 |
| Offside Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 2 |
| Front passenger door cannot be opened from inside the vehicle (6.2.3 (a)) | 2 |
| Front Windscreen wiper not working (3.4 (a)) | 2 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 2 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 2 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg (5.3.6 (a) (i)) | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor area (7.1.1 (a) (i)) | 2 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced arch (7.1.1 (a) (i)) | 2 |
| Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Emissions unable to be completed engine misfiring (8.2.1.2 (d)) | 2 |
| Headlamp aim projected beam image is obviously incorrect x2 (4.1.2 (c)) | 2 |
| Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 2 |
| Rear Exhaust shield missing where fitted as original equipment creating a risk of fire (6.1.3 (e)) | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 2 |
| Nearside Front Hydraulic brake calliper leaking and braking performance affected |1.1.16 |b| |ii|| | 2 |
| Nearside Rear Road wheel fractured (5.2.2 (a)) | 2 |
| Nearside Rear Upper Coil spring fractured or broken (5.3.1 (b) (i)) | 2 |
| Nearside Ball joint has excessive play |2.2.B.1f| | 2 |
| Nearside Front Ball joint has excessive play |2.2.B.1f| | 2 |
| Rear Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 2 |
| Headlamp light source and lamp not compatible (4.1.4 (c)) | 2 |
| Offside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 2 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
| Nearside Side repeater missing (4.4.1 (a) (ii)) | 2 |
| Front An item not tested |Manual| | 2 |
| Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Front Direction indicators not working |1.4.A.2c| | 2 |
| Offside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 2 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 2 |
| Offside Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Offside Front Lower Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
| Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6| | 2 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 2 |
| Power steering inoperative and steering adversely affected (2.1.5 (c) (ii)) | 2 |
| Emissions oxygen sensor missing where one was fitted as standard (8.2.1.1 (a)) | 2 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor to sill |5.2.6| | 2 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outer sill (5.3.6 (a) (ii)) | 2 |
| Anti-lock braking system warning lamp does not illuminate |1.6 |a|| | 2 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 2 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 2 |
| Nearside Rear Brake pipe at imminent risk of failure or fracture (1.1.11 (a)) | 2 |
| Central Exhaust has a major leak of exhaust gases joint (6.1.2 (a)) | 2 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i)) | 2 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i)) | 2 |
| Nearside Front Position lamp not working side light (4.2.1 (a) (ii)) | 2 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre floor (7.1.1 (a) (i)) | 2 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i)) | 2 |
| Nearside Front Front passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 2 |
| Rear fog lamp switch not operating in accordance with the requirements (4.5.3 (a)) | 2 |
| Nearside Front Anti-roll bar linkage pin or bush excessively worn loose (5.3.4 (a) (i)) | 2 |
| Nearside Passengers seat insecure (6.2.6 (a) (ii)) | 2 |
| Rear brake disc modified and seriously weakened |3.5.1n| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 2 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill area |7.1.1 |a| |i|| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mounting point |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor (5.3.6 (a) (i)) | 2 |
| Emissions not tested |8.2.2.2 |e|| | 2 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 2 |
| Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b)) | 2 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 2 |
| Steering wheel has excessive movement up and down (2.2.2 (a)) | 2 |
| Offside Front Anti-roll bar insecurely attached (5.3.3 (a) (i)) | 2 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i)) | 2 |
| Offside Rear Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 2 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Sill (6.1.1 (c) (i)) | 2 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet (6.1.1 (c) (i)) | 2 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 2 |
| Rear Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 2 |
| Offside Seat belt insecurely fixed to the seat |5.2.1a| | 2 |
| Nearside Front Brake hose stretched |found during steering lock to lock check| |2.2.D.2b| | 2 |
| Offside Rear Outer Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 2 |
| Nearside Rear Outer Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 2 |
| Front Passenger`s seat insecure |6.2.A.1| | 2 |
| Offside Front Upper Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 2 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i)) | 2 |
| Nearside Front front brake grabbing severely |3.7.A.2b| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength end of sill (5.3.6 (a) (i)) | 2 |
| Nearside Side repeater not working |4.4.1 |a| |ii|| | 2 |
| Offside Front Track rod end ball joint worn to the extent there is a serious risk of detachment |2.1.3 |b| |ii|| | 2 |
| Centre Upper Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 2 |
| Offside Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 2 |
| Nearside Front Steering locking device insecure |2.2.C.1g| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 2 |
| Brake fluid warning lamp inoperative |3.6.G.2| | 2 |
| Offside Front All position lamps not working |4.2.1 |a|| | 2 |
| Offside Rear Stop lamp|s| all not working |4.3.1 |a| |iii|| | 2 |
| Offside Front Road wheel fixing loose (5.2.1 (a) (i)) | 2 |
| Brake pipe leaking on an air braking system (1.1.11 (b) (i)) | 2 |
| Nearside Headlamp aim so that beam "kick up" is not visible on the screen |1.8.B.1| | 2 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded (7.1.1 (a) (i)) | 2 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i)) | 2 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 2 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i)) | 2 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i)) | 2 |
| Offside Front Body panel corroded and likely to cause injury (6.2.1 (a) (i)) | 2 |
| Offside Front Lower Suspension arm locating pin retaining device missing |2.4.G.3b| | 2 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outter sill |5.2.6| | 2 |
| Offside Front Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 2 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 2 |
| Nearside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i)) | 2 |
| Offside Rear Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 2 |
| Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 2 |
| Rear Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 2 |
| Offside Rear Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Nearside Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Seat belt webbing significantly weakened (7.1.2 (b) (ii)) | 2 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i)) | 2 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill (7.1.1 (a) (i)) | 2 |
| Offside Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance |1.3.2d| | 2 |
| Offside Front Brake pipe leaking |3.6.A.1| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan (7.1.1 (a) (i)) | 2 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i)) | 2 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid caliper (1.1.16 (b) (i)) | 2 |
| Offside Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii)) | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill (7.1.1 (a) (i)) | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i)) | 2 |
| Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 2 |
| Brake lever has insufficient reserve travel Handbrake (1.1.2 (a)) | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 2 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 2 |
| Nearside Seat belt locking mechanism does not secure or release |5.2.5a| | 2 |
| Nearside Seat belt retracting mechanism defective |5.2.5b| | 2 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 2 |
| Nearside Rear Anti-roll bar missing |2.4.G.1| | 2 |
| Brake pedal has insufficient reserve travel |1.1.2 |a|| | 2 |
| Steering wheel in a condition that hampers proper control |2.1.1| | 2 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear of outer sill (7.1.1 (a) (i)) | 2 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 2 |
| Nearside Direction indicator not working |1.4.A.2c| | 2 |
| Brake pedal anti-slip provision missing |1.1.2 |c|| | 2 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 2 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 2 |
| Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
| Nearside Rear brake caliper leaking (3.6.A.1) | 2 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor area (5.3.6 (a) (i)) | 2 |
| Offside Seat belt anchorage prescribed area is fractured |5.2.6| | 2 |
| Brake fluid significantly below minimum mark |1.1.10 |d| |ii|| | 2 |
| Parking brake lever is impeded in its travel |3.1.6c| | 2 |
| Nearside Rear Parking |secondary brake| on a single line braking system has no recorded effort at a wheel |1.3.1 |a| |ii|| | 2 |
| Brake pipe leaking on a hydraulic braking system front to rear |1.1.11 |b| |ii|| | 2 |
| Power steering component|s| leaking rack |2.3.3b| | 2 |
| Front Shock absorber has a serious fluid leak |2.7.3| | 2 |
| Nearside Rear Brake pipe inadequately supported |3.6.B.1| | 2 |
| Brake lever has insufficient reserve travel hand brake (1.1.2 (a)) | 2 |
| Offside Rear Body has a projection caused by corrosion |6.1.C.1| | 2 |
| Offside Seat belt webbing significantly weakened (7.1.2 (b) (ii)) | 2 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 2 |
| Rear Brake disc significantly and obviously worn both (1.1.14 (a) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 2 |
| Offside Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Nearside Rear position lamp|s| has a product on the lens so it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Offside Rear position lamp|s| has a product on the lens so it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6| | 2 |
| Offside Front Shock absorber has an excessively worn bush |2.7.4| | 2 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i|| | 2 |
| Offside Front Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 2 |
| Rear fog lamp light intensity significantly reduced (4.5.4 (a)) | 2 |
| Offside Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 2 |
| Offside Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Nearside Rear Macpherson strut corroded and seriously weakened |2.4.G.1| | 2 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassi |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassi |2.4.A.3| | 2 |
| Offside Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 2 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 2 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 2 |
| Emissions NOx sensor obviously defective (8.2.1.1 (a)) | 2 |
| Nearside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 2 |
| Offside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 2 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded OUTER SILL |5.2.6| | 2 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded OUTER SILL |5.2.6| | 2 |
| Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Outer Sill |2.4.A.3| | 2 |
| Nearside Front Steering rack gaiter insecure |2.2.D.2d| | 2 |
| Offside Front Tie bar/rod fractured |2.4.G.1| | 2 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) | 2 |
| Offside Front Tie bar/rod insecure |2.4.G.1| | 2 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor |7.1.1 |a| |i|| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i|| | 2 |
| Offside Front Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Nearside Front Lower Suspension arm insecurely attached (5.3.3 (a) (i)) | 2 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 2 |
| Headlamp has a product on the lens so that the light output is severely reduced both |4.1.4 |b|| | 2 |
| Offside Front Steering locking device missing |2.2.C.1g| | 2 |
| Offside Front Seat belt stitching badly frayed |5.2.2b| | 2 |
| Exhaust emissions exceed manufacturer`s specified limit |8.2.2.2 |a|| | 2 |
| Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 2 |
| Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 2 |
| Offside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Rear Anti-roll bar linkage insecure and impairing directional stability |5.3.3 |a| |ii|| | 2 |
| Nearside Front Power steering pipe/hose leaking |2.1.5 |a|| | 2 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i)) | 2 |
| Nearside Front Steering locking device missing (2.1.3 (d)) | 2 |
| Nearside Front front brake binding (3.7.B.1) | 2 |
| Offside Stop lamp not working (1.2.1b) | 2 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 2 |
| Offside Outer Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Offside Front Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 2 |
| Offside Rear Outer Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Central Brake pipe at imminent risk of failure or fracture (1.1.11 (a)) | 2 |
| Centre Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 2 |
| Parking |secondary brake| on a single line braking system imbalanced across an axle Axle 1 |1.3.1 |b| |i|| | 2 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 2 |
| Rear Exhaust has a major leak of exhaust gases rear box (6.1.2 (a)) | 2 |
| Offside Rear rear brake recording little or no effort hand brake |3.7.B.5a| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting |5.3.6 |a| |i|| | 2 |
| Offside Front Anti-roll bar linkage insecure and impairing directional stability |5.3.3 |a| |ii|| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis |5.3.6 |a| |i|| | 2 |
| Nearside Rear Service brake lagging in operation |1.2.1 |d|| | 2 |
| Offside Front Headlamps matched pair are incorrectly positioned |1.7.3| | 2 |
| Nearside Front Headlamps matched pair are incorrectly positioned |1.7.3| | 2 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 2 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill area |7.1.1 |a| |i|| | 2 |
| Fuel system component insecure |7.2.1| | 2 |
| Front Position lamp not working |4.2.1 |a|| | 2 |
| Rear Coil spring fractured or broken both (5.3.1 (b) (i)) | 2 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor (6.2.2 (d) (i)) | 2 |
| Offside Seat belt stitching badly frayed |5.2.2b| | 2 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i|| | 2 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 2 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 2 |
| Exhaust has a major leak of exhaust gases back box |7.1.2| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis leg |6.1.B.2| | 2 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 2 |
| Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 2 |
| Rear Tie bar/rod attachment bracket/mounting insecure |2.4.G.1| | 2 |
| Offside Rear Body component corroded and likely to cause injury wheel arch |6.2.1 |a| |i|| | 2 |
| Offside Front Brake pipe connection leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 2 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded chassis |5.2.6| | 2 |
| Offside Power steering ram|s| leaking from a failed seal |2.3.3b| | 2 |
| Nearside Outer Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Offside Power steering component|s| leaking rack |2.3.3b| | 2 |
| Offside Rear Anti-roll bar linkage damaged and seriously weakened |2.4.G.1| | 2 |
| Exhaust emissions hydrocarbon content excessive |8.2.1.2 |b|| | 2 |
| Hydraulic fluid leaking excessively (8.4.1 (a) (i)) | 2 |
| Offside Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 2 |
| Offside Rear Body panel corroded and likely to cause injury |6.2.1 |a| |i|| | 2 |
| Offside Front Lower Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 2 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 2 |
| Nearside Rear Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 2 |
| Nearside Inner Front Road wheel bead rim badly distorted |4.2.A.1a| | 2 |
| Offside Rear Rear position lamp|s| incomplete |1.1.4a| | 2 |
| Offside Rear Brake pipe at imminent risk of failure or fracture (1.1.11 (a)) | 2 |
| Dipswitch operation does not deflect all main beam headlamps to make them dipped beams (4.1.3 (b)) | 2 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill panel |5.2.6| | 2 |
| Offside Rear Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Nearside Rear Anti-roll bar fractured |2.4.G.1| | 2 |
| Hazard warning tell tale not working correctly |1.4.B.1e| | 2 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Offside Front Anti-roll bar linkage ball joint dust cover missing |2.4.G.2| | 2 |
| Nearside Front Track rod end loose |2.2.B.1d| | 2 |
| Nearside Rear Brake cable has wires broken and is significantly weakened |3.5.1b| | 2 |
| Offside Brake pipe leaking on a hydraulic braking system front to rear (1.1.11 (b) (ii)) | 2 |
| Headlamp has a product on the lens so that the light output is severely reduced both |1.7.5a| | 2 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 2 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 2 |
| Nearside Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance dim |1.1.A.3d| | 2 |
| Offside Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance dim |1.1.A.3d| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill to floor |5.2.6| | 2 |
| Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing |5.3.6 |a| |i|| | 2 |
| Offside Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 2 |
| Nearside Front Side repeater incomplete |1.5.A1b| | 2 |
| Offside Rear Lower Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Seat belt anchorage prescribed area is severely distorted |5.2.6| | 2 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded centre floor |5.2.6| | 2 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 2 |
| Nearside Front Seat belt buckle missing (7.1.2 (d)) | 2 |
| Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Brake pipe inadequately clipped |3.6.B.1| | 2 |
| Nearside Anti-roll bar linkage insecure |2.4.G.1| | 2 |
| Front Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 2 |
| Front Headlamp adversely affected by the operation of another lamp |1.7.5c| | 2 |
| Nearside Front Anti-roll bar linkage missing (5.3.3 (a) (ii)) | 2 |
| Nearside Front Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1| | 2 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 2 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 2 |
| Offside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Side repeater incomplete |1.5.A1b| | 2 |
| Offside Front Anti-roll bar linkage attachment bracket/mounting fractured (5.3.3 (b) (ii)) | 2 |
| Nearside Front Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits 1.07 |7.3.D.3| | 2 |
| Rear Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 2 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded (7.1.1 (a) (i)) | 2 |
| Nearside Front Side repeater incorrect colour |1.4.A.2f| | 2 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill holed |5.2.6| | 2 |
| Nearside Parking brake: efficiency below requirements |3.7.B.7| | 2 |
| All direction indicators not working |4.4.1 |a| |ii|| | 2 |
| Nearside Rear Lower Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 2 |
| Offside Body has a sharp edge caused by damage |6.1.C.1| | 2 |
| Offside Front Upper Suspension arm locating pin locking device missing |2.4.G.3b| | 2 |
| Power steering pipe|s| or hose|s| leaking main hose from resiviour |2.3.3b| | 2 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 2 |
| Offside Front Road wheel distorted |4.2.A.1a| | 2 |
| Stop lamp(s) not working all (4.3.1 (a) (ii)) | 2 |
| Offside Rear Rear position lamp|s| incorrect colour |1.1.A.3e| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Outer sill |2.4.A.3| | 2 |
| Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floor pan |5.2.6| | 2 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 2 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded INNER SILL |5.2.6| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill |5.3.6 |a| |i|| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis leg |6.1.B.2| | 2 |
| Nearside Front position lamp|s| not working sidelight |1.1.A.3b| | 2 |
| Offside Front Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill |6.2.2 |d| |i|| | 2 |
| Rear fog lamp switch inoperative |4.5.3 |a| |ii|| | 2 |
| Offside Rear Brake lining|s| less than 1.5 mm thick |3.5.1g| | 2 |
| Offside Front Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 2 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill panel. |5.2.6| | 2 |
| Horn not loud enough to be heard by another road user |1.6.2b| | 2 |
| Offside Front Drag link end ball joint has excessive play |2.2.B.1f| | 2 |
| Parking brake inoperative on one side (1.4.1 (a)) | 2 |
| Front Undertray likely to become detached |6.2.1 |a| |ii|| | 2 |
| Headlamp insecure |1.7.3| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mounting |2.4.A.3| | 2 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 2 |
| Offside Rear brake caliper securing device missing |3.5.1j| | 2 |
| Nearside Front Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 2 |
| Offside Rear Road wheel cracked |4.2.A.1a| | 2 |
| Nearside Rear Fuel system component leaking |7.2.3| | 2 |
| Offside Front suspension has a suspension upper ball joint securing nut not locked |2.5.B.1a| | 2 |
| Drivers airbag obviously inoperative (7.1.5 (c)) | 2 |
| Offside Rear Outer Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 2 |
| Rear Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 2 |
| Front Oil leaking excessively from engine (8.4.1 (a) (i)) | 2 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced hole to outer sill (7.1.1 (a) (i)) | 2 |
| Emissions oxygen sensor obviously defective (8.2.1.1 (a)) | 2 |
| Upper Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
| Oil leaking continuously from engine posing a serious risk to road safety (8.4.1 (a) (ii)) | 2 |
| Offside Front Lower Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 2 |
| Offside Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a| | 2 |
| Nearside Power steering pipe/hose leaking (2.1.5 (a)) | 2 |
| Emissions not tested exhaust blowing (8.2.1.2 (d)) | 2 |
| Nearside Steering arm damaged and unserviceable |2.2.C.1d| | 2 |
| Nearside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 2 |
| Front Brake performance not tested |3.7.A.1| | 2 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
| Nearside Rear Service brake indicates brake bind |3.7.D.2a| | 2 |
| Offside Rear Service brake indicates brake bind |3.7.D.2a| | 2 |
| Rear fog lamp switch inoperative (4.5.3 (a) (ii)) | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded Floor |5.2.6| | 2 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 2 |
| Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
| Nearside Front Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Centre Exhaust has a major leak of exhaust gases joint |7.1.2| | 2 |
| Front Headlamp aim not tested |1.8.A.1c| | 2 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded Outer Sill |5.2.6| | 2 |
| Offside Rear Suspension arm likely to become detached (5.3.3 (a) (ii)) | 2 |
| Central Rear Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 2 |
| Front Headlamp aim beam image obviously incorrect both |1.8.A.1b| | 2 |
| Offside Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Rear Upper Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
| Nearside Front Brake pipe twisted |found during steering lock to lock check| |2.2.D.2b| | 2 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i)) | 2 |
| Nearside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Hydraulic brake calliper leaking |1.1.16 |b| |i|| | 2 |
| Offside Rear Front position lamp|s| not working |1.1.A.3b| | 2 |
| Brake pipe inadequately clipped front to rear |3.6.B.1| | 2 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 2 |
| Offside Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill area |2.4.A.3| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill area |2.4.A.3| | 2 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 2 |
| Emissions not tested due to exhaust |8.2.1.2 |d|| | 2 |
| Front Sub-frame corroded and seriously weakened |2.4.G.1| | 2 |
| Offside Front Front position lamp|s| not working side light |1.1.A.3b| | 2 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Floor excessively deteriorated |6.2.4 |a| |i|| | 2 |
| Offside Rear Lower Suspension arm likely to fail (5.3.3 (b) (ii)) | 2 |
| Offside Rear Body component corroded and likely to cause injury (6.2.1 (a) (i)) | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 2 |
| Nearside Front Anti-roll bar attachment bracket/mounting insecure bolt missing (5.3.3 (a) (i)) | 2 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 2 |
| Nearside Front Anti-roll bar linkage corroded and seriously weakened |2.4.G.1| | 2 |
| Offside Rear brake disc contaminated by oil |3.5.1h| | 2 |
| Windscreen has a combination of minor damage areas which restrict the drivers view |8.3.1c| | 2 |
| Rear Exhaust has a part missing |7.1.1a| | 2 |
| Brake fluid warning lamp illuminated fluid level low |3.6.G.2| | 2 |
| Offside Rear Anti-roll bar linkage has excessive play in a pin/bearing |2.4.G.2| | 2 |
| Nearside Rear Brake pipe connection leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 2 |
| Offside Rear Brake pipe connection leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 2 |
| Offside Rear Shock absorber insecure |2.7.2b| | 2 |
| Nearside Rear Fuel cap/sealing device missing |7.2.4a| | 2 |
| Offside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i)) | 2 |
| Nearside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Front Position lamp not working Both (4.2.1 (a) (ii)) | 2 |
| Nearside Front Floor excessively deteriorated (6.2.4 (a) (i)) | 2 |
| Offside Front Power steering component|s| leaking |2.3.3b| | 2 |
| Steering rack gaiter split |2.2.D.2d| | 2 |
| Nearside Front Anti-roll bar ball joint excessively worn |5.3.4 |a| |i|| | 2 |
| Centre Rear Exhaust has a major leak of exhaust gases joint |7.1.2| | 2 |
| Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill holed |5.2.6| | 2 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Side repeater missing |4.4.1 |a| |ii|| | 2 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired |7.1.1 |a| |i|| | 2 |
| Offside Front Lower Suspension arm locating pin retaining device not properly locked |2.4.G.3b| | 2 |
| Centre Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 2 |
| Nearside Headlamp aim beam image obviously incorrect bulb insecure |1.8.A.1b| | 2 |
| Brake lever has insufficient reserve travel handbrake |1.1.2 |a|| | 2 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 2 |
| Nearside Inner Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Nearside Front Upper Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Offside Rear Upper Coil spring fractured or broken (5.3.1 (b) (i)) | 2 |
| Nearside Headlamp incorrect colour |1.7.5b| | 2 |
| Exhaust has a major leak of exhaust gases rear box |7.1.2| | 2 |
| Offside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 2 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |6.1.1 |c| |i|| | 2 |
| Offside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 2 |
| Hazard warning switch missing |1.4.B.1d| | 2 |
| Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened |5.3.3 |b| |i|| | 2 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 2 |
| Offside Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner arch |2.4.A.3| | 2 |
| Rear Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 2 |
| Nearside Rear Anti-roll bar linkage missing |2.4.G.1| | 2 |
| Nearside Headlamp lens seriously defective |4.1.1 |b| |ii|| | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 2 |
| Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 2 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 2 |
| Offside Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 2 |
| Central Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Nearside Front Service brake lagging in operation |1.2.1 |d|| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS LEG (5.3.6 (a) (i)) | 2 |
| Brake hydraulic reservoir leaking hydraulic fluid |3.6.A.1| | 2 |
| Nearside Rear Inner Brake pipe at imminent risk of failure or fracture (1.1.11 (a)) | 2 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired chassis leg |6.2.2 |d| |ii|| | 2 |
| Offside Rear Lower Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting (5.3.6 (a) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting (5.3.6 (a) (i)) | 2 |
| Rear Exhaust silencer likely to become detached (8.1.1 (b) (ii)) | 2 |
| Nearside Front Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 2 |
| Nearside Seat belt stitching badly frayed |5.2.2b| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer Sill (5.3.6 (a) (i)) | 2 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 2 |
| Offside Rear Road wheel distorted |4.2.A.1a| | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Outer sill |2.4.A.3| | 2 |
| Nearside Headlamp has a product on the light source so that the light output is severely reduced |4.1.4 |b|| | 2 |
| Offside brake disc in such a condition that it is seriously weakened |3.5.1i| | 2 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 2 |
| Offside Rear reflector excessively damaged so that its function is impaired |1.5.1c| | 2 |
| Offside Rear Hydraulic fluid leaking excessively caliper |8.4.1 |a| |i|| | 2 |
| Centre Front Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Nearside Brake cable has restricted free movement |3.5.1k| | 2 |
| Offside Brake cable has restricted free movement |3.5.1k| | 2 |
| Offside Windscreen wiper not working (3.4 (a)) | 2 |
| Nearside Rear Hydraulic brake calliper insecurely mounted and braking performance affected (1.1.16 (c) (ii)) | 2 |
| Offside Rear Stop lamp emits other than a steady red light |1.2.1e| | 2 |
| Offside Outer Front Anti-roll bar linkage insecure |2.4.G.1| | 2 |
| Offside Front Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 2 |
| Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 2 |
| Offside Headlamp light intensity severely reduced |4.1.4 |a|| | 2 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area (7.1.1 (a) (i)) | 2 |
| Nearside Front Anti-roll bar linkage damaged and seriously weakened |2.4.G.1| | 2 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i)) | 2 |
| Rear fog lamp switch missing (4.5.3 (a) (ii)) | 2 |
| Brake hydraulic reservoir fluid level significantly below minimum level |1.1.10 |d| |ii|| | 2 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 2 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis member (5.3.6 (a) (i)) | 2 |
| Nearside Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 2 |
| Offside Rear Suspension arm has excessive play in a pin/bush |2.4.G.2| | 2 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill |6.2.2 |d| |i|| | 2 |
| Offside Front Anti-roll bar linkage ball joint likely to become detached |5.3.4 |a| |ii|| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill |6.1.1 |c| |ii|| | 2 |
| Offside Rear Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Centre Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength closing panel area (5.3.6 (a) (i)) | 2 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength closing panel area (5.3.6 (a) (i)) | 2 |
| Nearside Rear Body panel corroded and likely to cause injury wheel arch |6.2.1 |a| |i|| | 2 |
| Offside Front Side repeater incorrect colour |1.4.A.2f| | 2 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 2 |
| Headlamp aim not tested both (4.1.2 (b)) | 2 |
| Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength by top suspension arm (5.3.6 (a) (i)) | 2 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 2 |
| Emissions not tested due to exhaust blow (8.2.1.2 (d)) | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 2 |
| Brake pipe at imminent risk of failure or fracture front to rear (1.1.11 (a)) | 2 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 2 |
| Exhaust catalytic converter missing where one was fitted as standard |8.2.2.1 |a|| | 2 |
| Nearside Front Service brake grabbing severely |1.2.1 |c|| | 2 |
| Power steering component leaking rack (2.1.5 (a)) | 2 |
| Offside Front Electrical wiring inadequately supported |1.9.2a| | 2 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/arch (5.3.6 (a) (i)) | 2 |
| Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 2 |
| Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under bonnet |2.4.A.3| | 2 |
| Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 2 |
| Offside Front Seat belt insecurely fixed to the seat |5.2.1a| | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Nearside Rear Parking brake efficiency below requirements (1.4.2 (a) (i)) | 2 |
| Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction |3.1 |a| |ii|| | 2 |
| Nearside Rear Front position lamp|s| not working |1.1.A.3b| | 2 |
| Offside Front Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a| | 2 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 2 |
| Power steering pipe/hose leaking (Heavy power steering) (2.1.5 (a)) | 2 |
| Offside Front Seat belt affected by an insecure seat fixing |5.2.1b| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill panel |5.2.6| | 2 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill panel |5.2.6| | 2 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill panel |5.2.6| | 2 |
| Offside Rear Brake pipe leaking on a hydraulic braking system front to rear (1.1.11 (b) (ii)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS RAIL (5.3.6 (a) (i)) | 2 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 2 |
| Offside Front Track rod end loose |2.2.B.1d| | 2 |
| Central Exhaust system insecure (6.1.2 (a)) | 2 |
| Nearside Front Front passenger door cannot be opened from inside the vehicle (6.2.3 (a)) | 2 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded SILL |5.2.6| | 2 |
| Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 2 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 2 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6| | 2 |
| Rear rear brakes release unevenly |3.7.B.4| | 2 |
| Offside Front Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) | 2 |
| Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Brake pedal anti-slip provision worn smooth |1.1.2 |c|| | 2 |
| Centre Rear Parking brake lever has no reserve travel |3.1.6b| | 2 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill panel |5.2.6| | 2 |
| Offside Front Position lamp not working sidelight (4.2.1 (a) (ii)) | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 2 |
| Offside Front Seat belt retracting mechanism defective |5.2.5b| | 2 |
| Brake master cylinder leaking |1.1.10 |b| |ii|| | 2 |
| Offside Rear Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 2 |
| Offside Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 2 |
| Offside Front Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 2 |
| Offside Outer Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Nearside Front Body has a sharp edge caused by damage |6.1.C.1| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mount |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mount |2.4.A.3| | 2 |
| Nearside Rear Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii)) | 2 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 2 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
| Central Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
| Nearside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 2 |
| Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 2 |
| Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i)) | 2 |
| Nearside Front Lower Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 2 |
| Wheel nut|s| missing |4.2.A.1e| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded CHASSIS RAIL |2.4.A.3| | 2 |
| Rear Exhaust has a major leak of exhaust gases box |7.1.2| | 2 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 2 |
| Offside Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 2 |
| Nearside Seat belt anchorage prescribed area is excessively corroded centre sill |5.2.6| | 2 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Upper Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 2 |
| Offside Rear Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 2 |
| Direction indicators not working All intermittent problem |1.4.A.2c| | 2 |
| Anti-lock braking system warning lamp sequence is incorrect |3.4.1d| | 2 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail |6.1.1 |c| |ii|| | 2 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Emissions not tested Major exhaust leak (8.2.1.2 (d)) | 2 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 2 |
| Rear brake caliper leaking |3.6.A.1| | 2 |
| Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Nearside Front Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 2 |
| Headlamp aim projected beam image is obviously incorrect Both (4.1.2 (c)) | 2 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 2 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 2 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 2 |
| Nearside Front Anti-roll bar attachment bracket/mounting insecure (5.3.3 (a) (i)) | 2 |
| Nearside Rear reflector excessively damaged so that its function is impaired |1.5.1c| | 2 |
| Offside Rear Service brake excessively fluctuating |1.2.1 |e|| | 2 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 2 |
| Rear Exhaust has a major leak of exhaust gases section |6.1.2 |a|| | 2 |
| Nearside Rear Service brake excessively fluctuating |1.2.1 |e|| | 2 |
| Front Windscreen wiper blade missing (3.4 (b) (ii)) | 2 |
| Nearside Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a| | 2 |
| Nearside Rear Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Headlamp not working on dipped beam (1.7.5a) | 2 |
| Nearside Front position lamp(s) not working (1.1.A.3b) | 2 |
| Front All position lamps not working |1.1.A.3b| | 2 |
| Rear Anti-roll bar corroded and seriously weakened (5.3.3 (b) (i)) | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
| Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
| Rear fog lamp obviously incorrectly positioned |1.3.2a| | 2 |
| Offside Front Headlamp aim unable to be tested (4.1.2 (b)) | 2 |
| Offside Headlamps matched pair are incorrectly positioned |1.7.3| | 2 |
| Track rod end ball joint has excessive play n/s (2.1.3 (b) (i)) | 2 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 2 |
| Offside Rear Tie bar/rod attachment bracket/mounting bolt missing |2.4.G.1| | 2 |
| Nearside Front Anti-roll bar linkage likely to become detached (5.3.3 (a) (ii)) | 2 |
| Exhaust has a major leak of exhaust gases centre and rear (6.1.2 (a)) | 2 |
| Offside Front Position lamp light intensity significantly reduced |4.2.3 |a| |ii|| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under bonnet |2.4.A.3| | 2 |
| Nearside Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 2 |
| Offside Front Steering system fouling |2.2.D.2a| | 2 |
| Rear Exhaust has a major leak of exhaust gases back box |7.1.2| | 2 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inside wheel arch within 30cm of ARB mounting (5.3.6 (a) (ii)) | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 2 |
| Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 2 |
| Offside Outer Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i)) | 2 |
| Nearside Outer Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i)) | 2 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 2 |
| Centre Rear Brake pipe inadequately clipped |3.6.B.1| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 2 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 2 |
| Front Position lamp not working both |4.2.1 |a|| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch |5.3.6 |a| |i|| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassie |2.4.A.3| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg area (5.3.6 (a) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg area (5.3.6 (a) (i)) | 2 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill. (7.1.1 (a) (i)) | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sidesill and chassis member |5.2.6| | 2 |
| front brake binding both |3.7.B.1| | 2 |
| Offside Rear Anti-roll bar has excessive play in a ball joint drop link |2.4.G.2| | 2 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 2 |
| Nearside Front Valve stem seriously damaged |5.2.3 |j|| | 2 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i)) | 2 |
| Fuel system component leaking |7.2.3| | 2 |
| Offside Front Lower Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Parking brake lever defective so that it cannot be satisfactorily operated |3.1.3c| | 2 |
| Nearside Windscreen wiper not operating automatically when switched on |8.2.1b| | 2 |
| Offside Windscreen wiper not operating automatically when switched on |8.2.1b| | 2 |
| Offside Seat belt affected by an insecure seat fixing |5.2.1b| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing area |2.4.A.3| | 2 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded SIDESILL |5.2.6| | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded SIDESILL |2.4.A.3| | 2 |
| Rear Service brake excessively binding (1.2.1 (f)) | 2 |
| Rear Emissions not tested |7.0| | 2 |
| Offside Rear Coil spring corroded so that its cross sectional area is reduced and seriously weakened |5.3.1 |b| |i|| | 2 |
| Nearside Front Side repeater incorrect colour (4.4.3 (a)) | 2 |
| Offside Front Side repeater incorrect colour (4.4.3 (a)) | 2 |
| Offside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii)) | 2 |
| Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 2 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 2 |
| Offside Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 2 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear outer sill (7.1.1 (a) (i)) | 2 |
| Nearside Front Seat belt not functioning as intended |7.1.2 |c|| | 2 |
| Exhaust fumes causing a danger to health of persons on board (6.1.2 (b) (ii)) | 2 |
| Exhaust has a major leak of exhaust gases rear joint (6.1.2 (a)) | 2 |
| Offside Outer Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Headlamp levelling device cannot be operated from the drivers seat (4.1.5 (b)) | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i)) | 2 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 2 |
| Nearside Front Steering component mounting prescribed area is excessively corroded chassis |2.2.C.1h| | 2 |
| Offside Front Steering component mounting prescribed area is excessively corroded chassis |2.2.C.1h| | 2 |
| Central Braking system leaking brake pipe |3.6.A.1| | 2 |
| Nearside Rear Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) | 2 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 2 |
| Offside Rear Valve stem seriously damaged |5.2.3 |j|| | 2 |
| Offside Rear Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 2 |
| Emissions not tested exhaust blowing |7.3.A.1| | 2 |
| Offside All position lamps not working |1.1.A.3b| | 2 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 2 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6| | 2 |
| Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 2 |
| Offside Headlamp has a product on the light source so that the light output is severely reduced |4.1.4 |b|| | 2 |
| Nearside Front Anti-roll bar linkage ball joint likely to become detached |5.3.4 |a| |ii|| | 2 |
| Nearside Rear Anti-roll bar has excessive play in a pin/bearing |2.4.G.2| | 2 |
| Emissions not tested EXHAUST LEAK. (8.2.1.2 (d)) | 2 |
| Offside Front Anti-roll bar linkage cracked |2.4.G.1| | 2 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 2 |
| Nearside Rear Brake pipe leaking on an air braking system (1.1.11 (b) (i)) | 2 |
| Front Position lamp not working both (4.2.1 (a) (ii)) | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 2 |
| Offside Rear Brake hydraulic reservoir leaking hydraulic fluid |3.6.A.1| | 2 |
| Nearside Front All position lamps light intensity significantly reduced (4.2.3 (a) (ii)) | 2 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 2 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Front Anti-lock braking system wheel speed sensor missing (1.6 (c)) | 2 |
| Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 2 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Rear Road wheel more than one fixing loose (5.2.1 (a) (ii)) | 2 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 2 |
| Engine MIL inoperative or indicates a malfunction inoperative (8.2.1.2 (h)) | 2 |
| Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg (6.2.2 (d) (i)) | 2 |
| Exhaust system insecure |6.1.2 |a|| | 2 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded strut |2.4.A.3| | 2 |
| rear brake juddering severely |3.7.A.5b| | 2 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 2 |
| Nearside Rear Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 2 |
| Offside Rear Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 2 |
| Rear Exhaust emissions likely to be affected by an exhaust leak |8.2.1.1 |b|| | 2 |
| Centre Exhaust mounting missing |7.1.1b| | 2 |
| Power steering disconnected where it is standard fitment |2.3.3a| | 2 |
| Horn emits two or more alternating tones |1.6.2d| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER CHASSIS (5.3.6 (a) (i)) | 2 |
| Nearside Rear Rear position lamp|s| incorrect colour |1.1.A.3e| | 2 |
| Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 2 |
| Offside Front Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired chassis leg hole just before front sub-frame (6.2.2 (d) (ii)) | 2 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced bumper bar (6.1.1 (c) (i)) | 2 |
| Offside Front Drivers airbag missing (7.1.5 (a)) | 2 |
| Offside Rear fog lamp adversely affected by the operation of another lamp |1.3.2f| | 2 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 2 |
| Nearside rear brake grabbing severely |3.7.A.5b| | 2 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i)) | 2 |
| Headlamp adversely affected by the operation of another lamp |1.7.5c| | 2 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Exhaust emits clearly visible black smoke during acceleration |7.3.A.2c| | 1 |
| Nearside Rear Exhaust has a part missing |7.1.1a| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to subframe mounting |5.3.6 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases rear & center (6.1.2 (a)) | 1 |
| Offside Front Windscreen wiper not working |3.4 |a|| | 1 |
| Rear Brake pipe leaking on an air braking system main |1.1.11 |b| |i|| | 1 |
| Nearside Rear Lower Stop lamp not working |1.2.1b| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting insecure |5.3.3 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected wing |5.3.6 |a| |ii|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower brake caliper securing device missing bolt missing |3.5.1j| | 1 |
| Offside Rear Rear position lamp|s| flickers when tapped lightly by hand |1.1.4c| | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Braking system leaking front to rear pipe |3.6.A.1| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill corroded |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded rear outer sill |5.2.6| | 1 |
| Brake pedal anti-slip provision loose (1.1.2 (c)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill excessively corroded (7.1.1 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced above bottom water hose (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis just in front of top suspension arm (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis inner wheel arch (6.1.1 (c) (ii)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis inner wheel arch (6.1.1 (c) (ii)) | 1 |
| Main beam tell-tale missing (4.9.1 (a) (ii)) | 1 |
| Hydraulic fluid leaking excessively power steering fluid leak (8.4.1 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded outer face of chassis rail |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner and outer face of chassis rail |2.4.A.3| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive 0.5% |7.3.D.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inside wheel arch. |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inside wheel arch. |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Offside rear outer sill. |2.4.A.3| | 1 |
| front brake binding Both sides |3.7.B.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill marked in yellow |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill marked in yellow |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg above anti roll bar mounting |5.3.6 |a| |i|| | 1 |
| Centre Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
| Offside Rear Upper Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
| Central Front Windscreen in an unacceptable condition crack in windscreen swept area larger than 40mm (3.2 (c) (i)) | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill |5.3.6 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded centre, outer sill panel |5.2.6| | 1 |
| Nearside Inner Front Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is severely distorted outer sill |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases Rear to middle flange (6.1.2 (a)) | 1 |
| Nearside Front Position lamp missing |4.2.1 |a|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis inner wheel arch area |2.4.A.3| | 1 |
| Exhaust carbon monoxide content at idle exceeds manufacturers specified limits 0.58 (8.2.1.2 (b)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive 0.610 |max lim0.300| |7.3.D.3| | 1 |
| Offside Front Upper Suspension arm locating pin locking device missing ball joint locking pin |2.4.G.3b| | 1 |
| Offside Rear Anti-roll bar linkage likely to fail incorrectly mounted (5.3.3 (b) (ii)) | 1 |
| Offside Rear Anti-roll bar insecure |2.4.G.1| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded Sill rusted |5.2.6| | 1 |
| Centre Exhaust has a major leak of exhaust gases pipe broken |7.1.2| | 1 |
| Emissions not tested due to broken exhaust pipe |7.3.A.1| | 1 |
| Nearside Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Fluid leak harmful to the environment or a risk to other road users (8.4.1 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x 4 spots |5.3.6 |a| |i|| | 1 |
| Exhaust silencer likely to become detached x2 |8.1.1 |b| |ii|| | 1 |
| Rear Anti-roll bar linkage ball joint excessively worn both |5.3.4 |a| |i|| | 1 |
| Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Road wheel more than one fixing missing 1 Missing on each wheel (5.2.1 (a) (ii)) | 1 |
| Front Electrical wiring insecure |1.9.2a| | 1 |
| Nearside Rear Anti-roll bar corroded and seriously weakened |2.4.G.1| | 1 |
| Rear Sub-frame attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
| Rear Sub-frame attachment bracket/mounting insecure and impairing directional stability sub frame cross brace bolts missing (5.3.3 (a) (ii)) | 1 |
| Nearside Headlamp excessively deteriorated so that the light output is severely reduced dip and main beam very dull |1.7.5a| | 1 |
| Steering arm modification unsafe Welded track rod |2.1.3 |f| |i|| | 1 |
| Nearside Front Upper Suspension arm mounting modified so the suspension is likely to fail other components inner mounting brackets welded and distorted |5.3.3 |c| |ii|| | 1 |
| Nearside Front Lower Suspension arm ball joint likely to become detached inner fixing point insecure causing major play |5.3.4 |a| |ii|| | 1 |
| Offside Front Lower Suspension arm ball joint likely to become detached mounting bolts to lower arm loose |5.3.4 |a| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases center and rear required (6.1.2 (a)) | 1 |
| Rear Exhaust system insecure missing (6.1.2 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis member (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill holed (7.1.1 (a) (i)) | 1 |
| Emissions unable to be completed due to coolant leak (8.2.1.2 (d)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front chassis rails slightly corroded (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail / inner flitch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail / inner flitch (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear outter sill (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front chassis leg (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front chassis leg (6.1.1 (c) (i)) | 1 |
| Front Headlamp aim projected beam image is obviously incorrect both sides (4.1.2 (c)) | 1 |
| Front Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps (4.1.3 (b)) | 1 |
| Rear Stop lamp|s| not working both |4.3.1 |a| |ii|| | 1 |
| Offside Rear Side repeater not working |1.4.A.2c| | 1 |
| Direction indicator not working |1.4.A.2c| | 1 |
| Exhaust has a major leak of exhaust gases centre section loose and could get readings from tailpipe |7.1.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner and outer sills marked yellow |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner and outer sills marked yellow |5.2.6| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i|| | 1 |
| Nearside Power steering ram leaking Rack |2.1.5 |a|| | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Brake performance not tested due to leaking component |1.2.1 |g|| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings underside |6.1.B.2| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Emissions unable to be completed cat stolen. (8.2.1.2 (d)) | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill, marked with chalk (6.2.2 (d) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases section, temp sealed( tailpipe corroding away) (6.1.2 (a)) | 1 |
| Nearside Front Tie bar/rod attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Nearside Rear Headlamp incorrect colour |1.7.5b| | 1 |
| Offside Rear Headlamp incorrect colour |1.7.5b| | 1 |
| Emissions not tested coolant leak (8.2.1.2 (d)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill jacking point |6.1.B.2| | 1 |
| Nearside Rear Anti-roll bar has excessive play in a ball joint drop link |2.4.G.2| | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill jacking point |6.1.1 |c| |i|| | 1 |
| Nearside Rear Lower Suspension arm corroded and seriously weakened arm |5.3.3 |b| |i|| | 1 |
| Offside Rear Lower Suspension arm corroded and seriously weakened arm |5.3.3 |b| |i|| | 1 |
| Offside Rear Service brake has no recorded effort at a wheel handbrake |1.2.1 |a| |ii|| | 1 |
| Offside Rear Coil spring mounting fractured (5.3.1 (b) (i)) | 1 |
| Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt drop link (5.3.4 (b) (ii)) | 1 |
| Offside Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt drop link (5.3.4 (b) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases center to rear (6.1.2 (a)) | 1 |
| Passengers airbag missing steering wheel (7.1.5 (a)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner seal (7.1.1 (a) (i)) | 1 |
| Rear Upper Coil spring fractured or broken n/s and o/s (5.3.1 (b) (i)) | 1 |
| Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Nearside Rear Anti-roll bar likely to become detached (5.3.3 (a) (ii)) | 1 |
| Offside Rear Anti-roll bar likely to become detached (5.3.3 (a) (ii)) | 1 |
| Side repeater not working both nearside and offside (4.4.1 (a) (ii)) | 1 |
| Front Headlamp aim projected beam image is obviously incorrect both nearside and offside (4.1.2 (c)) | 1 |
| Emissions unable to be completed exhaust pipe broken between middle and rear section (8.2.1.2 (d)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Offside inner/outer sill |7.1.1 |a| |i|| | 1 |
| Anti-roll bar linkage has excessive play in a pin/bush n/s rear link bar |2.4.G.2| | 1 |
| Headlamp not working on dipped beam o/s front |1.7.5a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mounting point |2.4.A.3| | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering chassis at front both sides |6.1.A.1| | 1 |
| Nearside Rear Lower Anti-roll bar linkage damaged and seriously weakened excess play in lower ball pin |2.4.G.1| | 1 |
| Emissions not tested cat broken |8.2.1.2 |d|| | 1 |
| Exhaust catalytic converter obviously defective rattling |8.2.1.1 |a|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both rear sills corroded & holed |7.1.1 |a| |i|| | 1 |
| Nearside Inner Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Centre Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner/sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner/sill |2.4.A.3| | 1 |
| Offside Rear Brake disc contaminated (1.1.14 (b)) | 1 |
| Offside Rear Lower Suspension arm likely to become detached |5.3.3 |a| |ii|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch |7.1.1 |a| |i|| | 1 |
| Offside Rear Lower Exhaust carbon monoxide content at idle exceeds manufacturers specified limits (8.2.1.2 (b)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill panel (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill panel (7.1.1 (a) (i)) | 1 |
| Nearside Front Windscreen wiper blade missing |8.2.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner wheel arch,adjacent to anti roll bar mounting bracket |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded floor x 2 |5.2.6| | 1 |
| Fuel cap/sealing device does not fasten securely by positive means incorrect type |7.2.4b| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis/inner arch |2.4.A.3| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced engine bay chassis leg (6.1.1 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength N/s chassis leg (5.3.6 (a) (i)) | 1 |
| Indicator tell tale inoperative |1.4.A.2a| | 1 |
| Nearside Front front parking |secondary| brakes imbalanced |3.7.B.6b| | 1 |
| Exhaust has a major leak of exhaust gases centre section exhaust (6.1.2 (a)) | 1 |
| Emissions unable to be completed rear box snapped off. (8.2.1.2 (d)) | 1 |
| Offside Rear position lamp|s| insecure |1.1.A.3a| | 1 |
| Offside Stop lamp insecure |1.2.1a| | 1 |
| Offside Rear Direction indicator insecure |1.4.A.2b| | 1 |
| Bootlid cannot be secured in the closed position |6.4.1| | 1 |
| Nearside Front Anti-roll bar linkage damaged and seriously weakened (5.3.3 (b) (i)) | 1 |
| Offside Rear Brake pipe leaking on a hydraulic braking system CENTRE X 2 OR MORE (1.1.11 (b) (ii)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering by anti roll bar |6.1.A.1| | 1 |
| Offside Vehicle structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis under wing |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis lower face |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases Centre Section And Rear Section |6.1.2 |a|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Wheel Arch |6.1.1 |c| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases middle exhaust pipe |7.1.2| | 1 |
| Offside Position lamp not working |4.2.1 |a| |ii|| | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect levelling device not tested (4.1.2 (c)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect levelling device not tested (4.1.2 (c)) | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded Sill area |5.2.6| | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill by door shut (6.1.1 (c) (i)) | 1 |
| Rear Body panel corroded and likely to cause injury arches both sides. Sharp edges (6.2.1 (a) (i)) | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill marked yellow (6.1.1 (c) (i)) | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill marked yellow (6.1.1 (c) (i)) | 1 |
| Offside Rear Brake pipe leaking on an air braking system |1.1.11 |b| |i|| | 1 |
| Rear Exhaust has a major leak of exhaust gases rear box and central join corroded badly an leaking (6.1.2 (a)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced marked with white chalk (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced marked with white chalk (6.1.1 (c) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i)) | 1 |
| Headlamp aim not tested due to bulb not working (4.1.2 (b)) | 1 |
| Offside Rear Position lamp missing (4.2.1 (a) (ii)) | 1 |
| Offside Stop lamp(s) missing (4.3.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator missing (4.4.1 (a) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 1 |
| Nearside Upper Front suspension has a suspension upper ball joint securing nut not locked |2.5.B.1a| | 1 |
| Offside Upper Front suspension has a suspension upper ball joint securing nut not locked |2.5.B.1a| | 1 |
| Nearside Lower Front suspension has a suspension upper ball joint securing nut not locked |2.5.B.1a| | 1 |
| Offside Lower Front suspension has a suspension upper ball joint securing nut not locked |2.5.B.1a| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive 6.13% |7.3.D.3| | 1 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits 0.836 |7.3.D.3| | 1 |
| Nearside rear brake recording little or no effort parking brake |3.7.B.5a| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded in wheel arch, marked in yellow |2.4.A.3| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits 0.32 |8.2.1.2 |b|| | 1 |
| Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Offside Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Nearside Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Suspension component mounting prescribed area is fractured both front chassis legs |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded on chassis rail |2.4.A.3| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded on floor |5.2.6| | 1 |
| Emissions not tested engine overheating risk of damage. (8.2.1.2 (d)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded on outer sill |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded on outer sill |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced on floor |7.1.1 |a| |i|| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower boot (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced on inner & outer sills (7.1.1 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced on floor & outer sill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced on outer sill (7.1.1 (a) (i)) | 1 |
| Rear fog lamp has a product on the light source so it is not visible from a reasonable distance |1.3.2d| | 1 |
| Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Undertray insecure (8.1.1 (b) (i)) | 1 |
| Nearside Front Power steering component fouling rack gaiter. (2.1.5 (e) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases joint to downpipe |6.1.2 |a|| | 1 |
| Front Exhaust has a major leak of exhaust gases joint to catalytic converter |6.1.2 |a|| | 1 |
| Offside Power steering pipe|s| or hose|s| leaking |2.3.3b| | 1 |
| Offside Front Lower Suspension arm has excessive play in a ball joint lift |2.4.G.2| | 1 |
| Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Front Steering system has a road wheel fouling a part of the vehicle |2.2.D.2a| | 1 |
| Nearside Side repeater not working SIDE WING REPEATER NOT WORKING ( WIREING FAULT).
NOT WORKING WITH HAZZARD`S. (4.4.1 (a) (ii)) | 1 |
| Nearside Front Lower Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Centre Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Lower Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Rear Tie bar/rod attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Front Obligatory mirror missing (3.3 (a)) | 1 |
| Fuel cap/sealing device missing WONT OPEN (6.1.3 (b) (i)) | 1 |
| Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER WING UNDER WHEEL ARCH (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting INNER WING UNDER WHEEL ARCH (6.2.2 (d) (i)) | 1 |
| Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting FLOOR TO SILL (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension arm missing |2.4.G.1| | 1 |
| Nearside Rear Suspension arm missing |2.4.G.1| | 1 |
| Wheel nut|s| loose |4.2.A.1e| | 1 |
| Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Upper Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
| Rear brake disc inappropriately repaired |3.5.1n| | 1 |
| Nearside Obligatory mirror insecure |8.1.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner and outer sil marked yellow |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected forward of front spring |5.3.6 |a| |ii|| | 1 |
| Offside Rear rear brakes release unevenly |3.7.B.4| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Excess corrosion to holes to nearside outer sill within 12" of front seat belt lower anchorage. |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Excess corrosion to holes to offside outer sill within 12" of front seat belt lower anchorage. |7.1.1 |a| |i|| | 1 |
| Offside Front Headlamp levelling device inoperative motor sticking (4.1.5 (a)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor area |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill/arch area |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded boot floor/pocket rear 1/4 |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer cill |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner cil |5.2.6| | 1 |
| Offside Front Position lamp missing |4.2.1 |a|| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` Sat Nav mount |8.3.1e| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill panel |5.2.6| | 1 |
| Fluid leaking continuously posing a serious risk to road safety oil |8.4.1 |a| |ii|| | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting chassis leg (6.2.2 (d) (i)) | 1 |
| Emissions not tested cat is missing |7.3.A.1| | 1 |
| Offside Front Horn not working |1.6.2a| | 1 |
| Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt link |5.3.4 |b| |ii|| | 1 |
| Offside Rear Coil spring fractured or broken upper coil broken |5.3.1 |b| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength underwing areas holed |5.3.6 |a| |i|| | 1 |
| Offside Body component damaged and likely to cause injury door mirror |6.2.1 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wing (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wing (5.3.6 (a) (i)) | 1 |
| Nearside Outer Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Nearside Front Outer Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Front Shock absorbers insecurely attached (5.3.2 (a) (i)) | 1 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 1 |
| Exhaust emits visible black smoke at idle |8.2.1.2 |f|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s/f chassis (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced n/s floor to sill corroded (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced o/s/r outer sill corroded (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced n/s/r outer sill corroded (7.1.1 (a) (i)) | 1 |
| Suspension arm corroded and seriously weakened o/s/r lower supension arm (5.3.3 (b) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced o/s/r inner sill to floor corroded. (7.1.1 (a) (i)) | 1 |
| Nearside Front Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Emissions unable to be completed EXHAUST LEAK. (8.2.1.2 (d)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength SILL. (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded Inner wing |CHASSIS| |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded Inner wing |CHASSIS| |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded lower outer sill as marked |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded as marked |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is severely distorted lower outer sill as marked |2.4.A.3| | 1 |
| Centre Seat belt anchorage prescribed area is excessively corroded outer outer sill as marked |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill as marked |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill as marked |5.2.6| | 1 |
| Centre Exhaust has a major leak of exhaust gases pipe joint |7.1.2| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wing as marked |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wing/chassis as marked |2.4.A.3| | 1 |
| Power steering pump leaking (2.1.5 (a)) | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassi (5.3.3 (b) (i)) | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassi (5.3.3 (b) (i)) | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill again |5.2.6| | 1 |
| Nearside Rear Anti-roll bar linkage ball joint likely to become detached is detached |5.3.4 |a| |ii|| | 1 |
| Nearside Front Lower Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Front Seat belt anchorage prescribed area strength or continuity significantly reduced near and offside (7.1.1 (a) (i)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded floor pan along inner sill area,various places |5.2.6| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded floor pan along inner sill,various places |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill/rear wheel arch |7.1.1 |a| |i|| | 1 |
| Nearside Rear rear brake recording little or no effort parking brake |3.7.B.5a| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail outer |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail inner |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Anti roll bar |2.4.A.3| | 1 |
| Emission control equipment missing where fitted as standard (8.2.1.1 (a)) | 1 |
| Brake performance unable to be tested leaking pipe (1.2.1 (g)) | 1 |
| Offside Rear Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded wheel arch |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill x2 |5.2.6| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Service brake imbalanced across an axle |1.2.1 |b| |i|| | 1 |
| Rear Exhaust has a major leak of exhaust gases between rear and centre exhaust (6.1.2 (a)) | 1 |
| Emissions unable to be completed Due to exhaust blow (8.2.1.2 (d)) | 1 |
| Parking brake inoperative on one side both (1.4.1 (a)) | 1 |
| Offside Rear Upper Brake pipe leaking |3.6.A.1| | 1 |
| Seat belt anchorage prescribed area is excessively corroded Both outer sills |5.2.6| | 1 |
| Offside front brake binding stuck on |3.7.B.1| | 1 |
| Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i|| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Rear Exhaust has a major leak of exhaust gases part of silencer missing |7.1.2| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/floorpan area |7.1.1 |a| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer and inner sills (6.1.1 (c) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced base of wheel arch (7.1.1 (a) (i)) | 1 |
| Front Headlamp has a product on the lens so that the light output is severely reduced Both front headlamp poor beam image/ no pattern....... (4.1.4 (b)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits C/O out of lmits...... (8.2.1.2 (b)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits Lambda out of limits......... (8.2.1.2 (c)) | 1 |
| Exhaust has a major leak of exhaust gases Center section poor condition.......... (6.1.2 (a)) | 1 |
| Offside Seat belt not functioning as intended |7.1.2 |c|| | 1 |
| Offside Rear Brake pipe connection leaking on a hydraulic braking system as marked |1.1.11 |b| |ii|| | 1 |
| Brake performance not tested due to 3 different brake fluid leaks |1.2.1 |g|| | 1 |
| Offside Rear Outer Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Rear Braking system leaking Brake pipe feed to rear brake system leaking. |3.6.A.1| | 1 |
| Nearside Front Front passenger seat insecure |6.2.3| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill within 30cm of seat mounting |5.2.6| | 1 |
| Offside Front Power steering component|s| leaking from a failed seal |2.3.3b| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Anti roll bar mounting |5.3.6 |a| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced middle sill (6.1.1 (c) (i)) | 1 |
| Exhaust system insecure middlle (6.1.2 (a)) | 1 |
| Braking system leaking rear area |3.6.A.1| | 1 |
| Brake performance not tested due to no reserve travel due to brake fluid leak |3.7.A.1| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded front sub frame, near side rear mounting area corroded |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded front sub frame ,off side rear mounting area corroded |2.4.A.3| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting seat belt and sill |6.2.2 |d| |i|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting upper suspension arm mount |6.2.2 |d| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer (5.3.6 (a) (i)) | 1 |
| Front Brake pipe leaking on a hydraulic braking system to rear (1.1.11 (b) (ii)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear of inner sills, both sides. (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Offside Rear Hydraulic brake calliper excessively weakened by corrosion |1.1.16 |d| |i|| | 1 |
| Nearside Front Headlamp adversely affected by the operation of another lamp dip beam goes out when full beam switched on |1.7.5c| | 1 |
| Nearside Front Lower Power steering pipe/hose leaking above undertray |2.1.5 |a|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis leg |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis leg |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis leg |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded FLOOR |5.2.6| | 1 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill and inner wheel arch sections [holed] (6.1.1 (c) (i)) | 1 |
| Exhaust has a major leak of exhaust gases in 2 areas/joints (6.1.2 (a)) | 1 |
| Nearside Front Suspension arm ball joint excessively worn lower (5.3.4 (a) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering anti roll bar mounting area |6.1.1 |c| |ii|| | 1 |
| Horn not a constant note |1.7.1e| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion wing at bottom |6.1.C.1| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both sides outer sills rusty (7.1.1 (a) (i)) | 1 |
| Power steering ram leaking steering rack (2.1.5 (a)) | 1 |
| Exhaust has a major leak of exhaust gases rear flange joint |6.1.2 |a|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Floor |5.2.6| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Rear Upper Suspension arm attachment bracket/mounting insecure and impairing directional stability bolt loose |5.3.3 |a| |ii|| | 1 |
| Nearside Rear Lower Suspension arm attachment bracket/mounting insecure and impairing directional stability bolt loose |5.3.3 |a| |ii|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor panel |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner sill |5.3.6 |a| |i|| | 1 |
| Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sills (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill sections (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing / chassis |2.4.A.3| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer Sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Position lamp light intensity significantly reduced sidelight bulb flashes (4.2.3 (a) (ii)) | 1 |
| Offside Front Position lamp light intensity significantly reduced sidelight bulb flashes (4.2.3 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases Middle joint (6.1.2 (a)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Front subframe. |2.4.A.3| | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mount and subframe mount (5.3.6 (a) (i)) | 1 |
| Headlamp excessively deteriorated so that the light output is severely reduced both |1.7.5a| | 1 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced rear inner wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Rear Rear position lamp|s| incorrect colour cracked white light visable |1.1.A.3e| | 1 |
| Nearside Rear Radius arm corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Front Lower Radius arm corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear Upper Radius arm corroded and seriously weakened |2.4.G.1| | 1 |
| Headlamp has a product on the lens so that the light output is severely reduced Both (4.1.4 (b)) | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded Outer sill |2.4.A.3| | 1 |
| Headlamp incorrect colour both |4.1.4 |a|| | 1 |
| Offside Front Direction indicator insecure |1.4.A.2b| | 1 |
| Rear Exhaust has a major leak of exhaust gases and centre sections |7.1.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded n/s door cill, seat belt prescribed area |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded seat mounting prescribed area |5.2.6| | 1 |
| Nearside Front Position lamp not working front n/s side light out (4.2.1 (a) (ii)) | 1 |
| Front Dipswitch does not operate immediately when selected on dipped beam front headlights on main beam has bad interaction (4.1.3 (b)) | 1 |
| Nearside Front Service brake excessively binding front n/s brake binding (1.2.1 (f)) | 1 |
| Nearside Rear Service brake excessively binding rear n/s brake binding (1.2.1 (f)) | 1 |
| Headlamp aim projected beam image is obviously incorrect both |4.1.2 |c|| | 1 |
| Offside Parking brake inoperative on one side reading low |1.4.1 |a|| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill |as marked| |5.2.6| | 1 |
| Emissions unable to be completed wont rev correctly (8.2.1.2 (d)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor / inner sill |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength between front most upper arm mount and anti roll bar inner bushing mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis member (5.3.6 (a) (i)) | 1 |
| Rear Shock absorbers has a serious fluid leak Both rear (5.3.2 (b)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded/ inadequate repair. (7.1.1 (a) (i)) | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded/ inadequate repair. (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis near anti roll bar mount |2.4.A.3| | 1 |
| Nearside Rear Braking system leaking Brake caliper |3.6.A.1| | 1 |
| Front Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Anti-roll bar linkage fractured LINK ROD (5.3.3 (b) (ii)) | 1 |
| Nearside Headlamp does not operate immediately when selected on main beam |1.7.4a| | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is inadequately repaired outer (7.1.1 (a) (i)) | 1 |
| Rear fog lamp excessively damaged so that it is not visible from a reasonable distance |1.3.2d| | 1 |
| Rear rear brake juddering severely |3.7.A.5b| | 1 |
| Offside Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 1 |
| Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Front Headlamp not working on dipped beam both side (4.1.1 (a) (ii)) | 1 |
| Emissions not tested Low oil |8.2.1.2 |d|| | 1 |
| Offside Front Lower Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Front Headlamp incorrect colour both |1.7.5b| | 1 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL |6.1.1 |c| |i|| | 1 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL |6.1.1 |c| |i|| | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced FLOOR |6.1.1 |c| |i|| | 1 |
| Emissions not tested NOT TESTED DUE TO ENGINE OVER HEATING |8.2.1.2 |d|| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill at rear |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis , as marked |2.4.A.3| | 1 |
| Offside Track rod end ball joint has excessive play steering rack track rod end as marked. shows up on shaker plates. (2.1.3 (b) (i)) | 1 |
| Nearside Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
| Offside Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
| Power steering component leaking pipes at nearside front (2.1.5 (a)) | 1 |
| Nearside Rear Upper Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Inner Rear brake disc excessively pitted |3.5.1h| | 1 |
| Offside Inner Rear brake disc excessively pitted |3.5.1h| | 1 |
| Offside Front Wheel nut(s) missing (4.2.A.1e) | 1 |
| Offside Rear Anti-lock braking system component missing sensor ring (1.6 (e)) | 1 |
| Nearside Rear Anti-lock braking system component missing sensor ring (1.6 (e)) | 1 |
| Drivers airbag missing has a working air bag lamp /aftermarket steering wheel fitted (7.1.5 (a)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner /outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill panel |7.1.1 |a| |i|| | 1 |
| Nearside Front Lower Anti-roll bar linkage corroded and seriously weakened ball joint fixing nut |5.3.3 |b| |i|| | 1 |
| Offside Front Lower Anti-roll bar linkage corroded and seriously weakened fixing nut |5.3.3 |b| |i|| | 1 |
| Braking system leaking rear of main brake pipe |3.6.A.1| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded both front chassis rails |2.4.A.3| | 1 |
| Nearside Front Upper Suspension arm ball joint dust cover missing (5.3.4 (b) (ii)) | 1 |
| Steering lock stop incorrectly adjusted (2.1.4 (b)) | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` mirror hanger |8.3.1e| | 1 |
| Emissions unable to be completed engine knock when reving plenty oil ....emissions high before test stopped lambda and co (8.2.1.2 (d)) | 1 |
| Offside Front All position lamps light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Wheel Arch (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases rear silencer holed and corroded |7.1.2| | 1 |
| Emissions not tested due to blowing exhaust |7.3.A.1| | 1 |
| Rear Sub-frame damaged and seriously weakened (5.3.3 (b) (i)) | 1 |
| Front Headlamp has a product on the lens so that the light output is severely reduced both (4.1.4 (b)) | 1 |
| Offside Rear Exhaust system insecure (6.1.2 (a)) | 1 |
| Central Brake pipe leaking on an air braking system front to rear |1.1.11 |b| |i|| | 1 |
| Offside Front Suspension arm attachment bracket/mounting corroded and seriously weakened shocker mounting |5.3.3 |b| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis X2 |2.4.A.3| | 1 |
| Nearside Front Side repeater light intensity significantly reduced (4.4.3 (a)) | 1 |
| Offside Front Side repeater light intensity significantly reduced (4.4.3 (a)) | 1 |
| Emissions unable to be completed Drive belt snap on emission test, battery went flat less than a minute, car wont start. (8.2.1.2 (d)) | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis box section (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength chassis box section/inner wheel arch (5.3.6 (a) (i)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak Centre pipe joining flange heavily corroded. (8.2.1.1 (b)) | 1 |
| Nearside Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Boot floor. (5.3.6 (a) (i)) | 1 |
| Nearside Front Steering component mounting prescribed area is excessively corroded Underside of chassis leg. (2.1.2 (e) (i)) | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded Underside of chassis leg. (2.1.2 (e) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/floor x2 (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/floor x2 (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/floor (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/floor/inner wheel arch (6.1.1 (c) (i)) | 1 |
| Brake lever has insufficient reserve travel Park brake |1.1.2 |a|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill to floor and inner arch |6.1.1 |c| |i|| | 1 |
| Offside Front Prop shaft flexible coupling so deteriorated it is likely to fail (6.1.7 (d) (ii)) | 1 |
| Offside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed by rust (6.1.1 (c) (i)) | 1 |
| Road wheel more than one fixing missing One wheel nut missing from all four wheels (5.2.1 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength floor |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top wishbone front mount, underside of chassis |5.3.6 |a| |i|| | 1 |
| Nearside Front Vehicle structure is deformed and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Offside Rear Brake pipe leaking on a hydraulic braking system FRONT TO REAR (1.1.11 (b) (ii)) | 1 |
| Brake performance not tested BRAKE PIPE LEAKING (1.2.1 (g)) | 1 |
| Offside Rear Braking system leaking BRAKE PIPE |3.6.A.1| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded REAR SILL PANEL |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded REAR SILL PANEL |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded CHASSIS RAIL |2.4.A.3| | 1 |
| Emissions not tested DUE TO TAIL PIPE MISSING |7.3.A.1| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Wheel arch |6.1.B.2| | 1 |
| Offside Rear coil spring corroded so that its cross sectional area is reduced and seriously weakened |2.4.C.1b| | 1 |
| brake disc in such a condition that it is seriously weakened front and rear in poor condition |3.5.1i| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases Just before the rear silencer. Big crack going around the pipe at the connection from middle box to rear silencer (6.1.2 (a)) | 1 |
| Power steering pipe/hose excessively corroded Looks like it runs from the power sterring pump to a flexi hose (2.1.5 (g) (i)) | 1 |
| Offside Front Anti-lock braking system wheel speed sensor missing (1.6 (c)) | 1 |
| Nearside Front Anti-lock braking system component missing (1.6 (e)) | 1 |
| Offside Front Anti-lock braking system component missing (1.6 (e)) | 1 |
| Drivers seat insecure At base, bolts loose (6.2.5 (a) (ii)) | 1 |
| Suspension arm ball joint likely to become detached Both front lower missing safety split pin locking devices (5.3.4 (a) (ii)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill/floor area (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill/floor area (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg near anti roll bar mounting |5.3.6 |a| |i|| | 1 |
| Service brake is causing the vehicle to swerve to the nearside |1.2.1 |b| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Subframe mount (5.3.6 (a) (i)) | 1 |
| Offside Floor insecure |6.2.4 |a| |i|| | 1 |
| Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting CILL |6.2.2 |d| |i|| | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting CILL |6.2.2 |d| |i|| | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting CILL |6.2.2 |d| |i|| | 1 |
| Rear rear brake recording little or no effort both |3.7.B.5a| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill holed |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at anti roll bar mount |5.3.6 |a| |i|| | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced cill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 1 |
| Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering SILL |6.1.1 |c| |ii|| | 1 |
| Offside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering SILL |6.1.1 |c| |ii|| | 1 |
| Nearside Rear Inner Hydraulic brake calliper leaking |1.1.16 |b| |i|| | 1 |
| Nearside Front passenger door cannot be opened from inside the vehicle |6.2.3 |a|| | 1 |
| Offside Front passenger door cannot be opened from outside the vehicle |6.2.3 |a|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis & inner wing (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out riggar (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced offside & nearside floor panels (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wing panel (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced offside & nearside bottom sills (7.1.1 (a) (i)) | 1 |
| Exhaust shield missing where fitted as original equipment creating a risk of fire at fuel tank (6.1.3 (e)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at chassis |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings at chassis |6.1.B.2| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan (7.1.1 (a) (i)) | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill panel |7.1.1 |a| |i|| | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill panel |7.1.1 |a| |i|| | 1 |
| Nearside Rear Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced floor to sill (6.1.1 (c) (i)) | 1 |
| Offside Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced floor to sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Sub-frame attachment bracket/mounting insecure bolt missing |5.3.3 |a| |i|| | 1 |
| Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
| Offside Rear Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Headlamp not working on dipped beam dip beam had bad connection (4.1.1 (a) (ii)) | 1 |
| Offside Rear Brake hose connection leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (as marked) (6.1.1 (c) (i)) | 1 |
| Offside Rear Anti-roll bar linkage insecure Drop link broken. |2.4.G.1| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded closing sill |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded closing sill |5.2.6| | 1 |
| Offside Rear Rear reflector excessively damaged so that its function is impaired |1.5.1c| | 1 |
| Nearside Rear Anti-roll bar ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Rear Exhaust has a major leak of exhaust gases pipe to back box (6.1.2 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis inside arch and under from subframe extending forward |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected under chassis from subframe extending forward |5.3.6 |a| |ii|| | 1 |
| Offside Front Position lamp has a product on the lens or light source which significantly reduces light intensity |4.2.3 |b| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheelarch/chassis |5.3.6 |a| |i|| | 1 |
| Rear Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt both (5.3.4 (b) (ii)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both outer sill (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases At rear box joint (6.1.2 (a)) | 1 |
| Offside Front Seat belt buckle not functioning as intended sticking on latch. (7.1.2 (d)) | 1 |
| Nearside Front Anti-roll bar synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Two parts of chassis (6.1.1 (c) (ii)) | 1 |
| Emissions not tested Will not go though test (8.2.1.2 (d)) | 1 |
| Emissions not tested cut out wont start |8.2.1.2 |d|| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Undertray likely to become detached (6.2.1 (a) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hold |6.1.B.2| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hold |6.1.B.2| | 1 |
| Offside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Emissions not tested due to engine misfire (8.2.1.2 (d)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill area |6.1.B.2| | 1 |
| Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leg |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings leg |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under body area |6.1.B.2| | 1 |
| Brake performance not tested due too front chassis legs corroded |3.7.A.1| | 1 |
| Front Brake pipe kinked |3.6.B.2b| | 1 |
| Headlamp lens seriously defective both sides obscured (4.1.1 (b) (ii)) | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer section of sill |5.2.6| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Offside inner sill marked with yellow chalk (7.1.1 (a) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis rail (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis rail (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill holed (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Holed in two places (6.2.2 (d) (i)) | 1 |
| Emissions not tested CO level too high (8.2.1.2 (d)) | 1 |
| Nearside Rear Anti-roll bar ball joint excessively worn Drop link. |5.3.4 |a| |i|| | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill holed. |6.2.2 |d| |i|| | 1 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid at wheel brake calliper (1.1.16 (b) (i)) | 1 |
| Nearside Front Front suspension retaining device missing |2.5.A.4| | 1 |
| Nearside Front Steering locking device missing track rod end (2.1.3 (d)) | 1 |
| Nearside Front Drive shaft uj which forms part of the suspension has excessive play in a universal joint |2.4.G.4b| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Holed Chassis (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Arch Large Corrosion Hole (6.1.1 (c) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Floor/inner sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected subframe and anti roll bar mounting. (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected subframe and anti roll bar mounting. (5.3.6 (a) (ii)) | 1 |
| Nearside Front Brake pipe fouled by moving parts |3.6.B.2a| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sil (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis corroded. |2.4.A.3| | 1 |
| Front Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak centre box leak (8.2.1.1 (b)) | 1 |
| Nearside Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Offside Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Offside Rear Upper Anti-roll bar linkage ball joint dust cover missing |2.4.G.2| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor to outer sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Wheel nut|s| loose |4.2.A.1e| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced FLOOR (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS LEG (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SILL (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER WHEEL ARCH (6.1.1 (c) (i)) | 1 |
| Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Offside Front Lower Anti-roll bar linkage fractured |2.4.G.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded sill back |2.4.A.3| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill hole |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill hole |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill hole |6.2.2 |d| |i|| | 1 |
| Nearside Rear Body component corroded and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Offside Rear Body component corroded and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear reflector excessively deteriorated so that its function is impaired |1.5.1c| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear inner wheel arches (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded N/S and O/S |2.4.A.3| | 1 |
| Nearside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced Chassis leg (6.1.1 (d) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill holed (6.2.2 (d) (i)) | 1 |
| Offside Rear Bumper damaged and likely to cause injury when grazed or contacted bumper (6.1.4 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage attachment bracket/mounting fractured broken (5.3.3 (b) (ii)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor area (7.1.1 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing near mounting |6.2.2 |d| |i|| | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting inner wing near mounting |6.2.2 |d| |i|| | 1 |
| Nearside Track rod end seriously misaligned |2.1.3 |e|| | 1 |
| Offside Track rod end seriously misaligned |2.1.3 |e|| | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Nearside Front Tie bar/rod fractured |2.4.G.1| | 1 |
| Nearside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill / wheel arch corroded and holed (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch corroded and holed (7.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced 2 areas (6.1.1 (c) (i)) | 1 |
| Nearside Rear Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Offside Rear Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Offside Front Upper Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction large sunscreen fitted (3.1 (a) (ii)) | 1 |
| Offside Front Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction mount for satnav fitted (3.1 (a) (ii)) | 1 |
| Offside Inner Integral body structure is fractured and structural rigidity is significantly reduced sill area (6.1.1 (a) (i)) | 1 |
| Nearside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing |6.2.2 |d| |i|| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i|| | 1 |
| Offside Front Suspension component pin or bush excessively worn lower bush |5.3.4 |a| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under body |6.2.2 |d| |i|| | 1 |
| Nearside Rear Suspension arm corroded and seriously weakened lower wishbone |5.3.3 |b| |i|| | 1 |
| Offside Rear Suspension arm corroded and seriously weakened lower wishbone |5.3.3 |b| |i|| | 1 |
| Offside Front Upper Suspension arm ball joint likely to become detached lock pin missing (5.3.4 (a) (ii)) | 1 |
| Nearside Front Upper Suspension arm ball joint likely to become detached lock pin missing (5.3.4 (a) (ii)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Hole in sill (7.1.1 (a) (i)) | 1 |
| Nearside Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
| Offside Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
| Power steering component leaking rack and pinion unit (2.1.5 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis |5.3.6 |a| |i|| | 1 |
| Power steering pipe|s| or hose|s| leaking Rear of engine bay |2.3.3b| | 1 |
| coil spring broken |2.4.C.1a| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed & corroded (7.1.1 (a) (i)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak at rear (8.2.1.1 (b)) | 1 |
| Rear wheel bearing has excessive play |2.6.2| | 1 |
| Rear Exhaust has a major leak of exhaust gases rear exhaust silencer corroded/holed (6.1.2 (a)) | 1 |
| Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill/wheel arch (7.1.1 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced lower part of chassis behind arch marked in yellow (6.1.1 (c) (i)) | 1 |
| Offside Rear Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases middle box |7.1.2| | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill in seat belt mounting prescribed area (6.2.2 (d) (i)) | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill in seat belt mounting prescribed area (6.2.2 (d) (i)) | 1 |
| Emissions not tested Exhaust leak (8.2.1.2 (d)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Rear Road wheel more than one fixing loose (5.2.1 (a) (ii)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Under anti roll bar mount (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Under anti roll bar mount (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner seal / chassis /floor marked (6.1.1 (c) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Drivers seat belt Perscribed area /outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill area (7.1.1 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded underside floor along inner sill corrored. |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded underside floor to sill corrored. |2.4.A.3| | 1 |
| Centre Rear Brake pipe leaking |3.6.A.1| | 1 |
| Brake lever has insufficient reserve travel parking brake (1.1.2 (a)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg corroded holed/fractured around sub frame mount areas (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg corroded holed/fractured around sub frame mount areas (5.3.6 (a) (i)) | 1 |
| Nearside Direction indicator missing |1.4.A.2b| | 1 |
| Nearside Front Anti-roll bar rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Wheel arch area |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg under bonnet |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis leg underside |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Wheel arch area |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg underside |2.4.A.3| | 1 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded on sill |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded on chassis leg |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension arm mounting point |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension arm mounting point |5.3.6 |a| |i|| | 1 |
| Offside Rear Lower Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill holed and corroded |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer chassis leg (5.3.6 (a) (i)) | 1 |
| Front Headlamp aim projected beam image is obviously incorrect both fronts (4.1.2 (c)) | 1 |
| Front Headlamp light source and lamp not compatible LEDs fitted (4.1.4 (c)) | 1 |
| Rear Seat belt anchorage prescribed area strength or continuity significantly reduced both sides outer sills (7.1.1 (a) (i)) | 1 |
| Offside Front Undertray likely to become detached (6.2.1 (a) (ii)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i)) | 1 |
| Power steering pipe/hose leaking to rack (2.1.5 (a)) | 1 |
| Centre Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Front Exhaust has a major leak of exhaust gases joint (6.1.2 (a)) | 1 |
| Brake performance unable to be tested Not tested due to fluid leak (1.2.1 (g)) | 1 |
| Emissions not tested Catalyst missing and emmisions excessive (8.2.1.2 (d)) | 1 |
| Emissions unable to be completed major exhaust leak (8.2.2.2 (e)) | 1 |
| Nearside Front Upper Suspension arm locating pin retaining device missing |2.4.G.3b| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis rail corroded |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis rail corroded |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Front Headlamp has a product on the lens so that the light output is severely reduced NO IMAGE ON HEADLIGHT |1.7.5a| | 1 |
| Nearside Anti-roll bar attachment bracket/mounting insecure BOLTS MISSING |2.4.G.1| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor pan with in 30cm of drivers seat (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced with in 30cm of sub frame (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced with in 30cm of sub frame (6.1.1 (c) (i)) | 1 |
| Nearside Front Anti-roll bar linkage missing broken away (5.3.3 (a) (ii)) | 1 |
| Centre Exhaust has a major leak of exhaust gases too rear join |7.1.2| | 1 |
| Offside Rear Anti-roll bar has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Anti-Roll Bar Mount |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded chassis rail |5.2.6| | 1 |
| Nearside Front Upper Anti-roll bar ball joint likely to become detached |5.3.4 |a| |ii|| | 1 |
| Central Exhaust silencer likely to become detached |8.1.1 |b| |ii|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced engine bay |6.1.1 |c| |i|| | 1 |
| Brake fluid contaminated over 4% |1.8 |a|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer seal |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer seal x2 |5.2.6| | 1 |
| Exhaust emissions carbon monoxide content excessive 0.82% (8.2.1.2 (b)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/chassis outrigger (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor/chassis rail (5.3.6 (a) (i)) | 1 |
| Nearside Body panel damaged and likely to cause injury o/s/ and n/s sharpe edges coursed by corrosion,
|inner and outer| front to rear, o/s/r wheel arch |6.2.1 |a| |i|| | 1 |
| Offside Brake pipe leaking front to rear |3.6.A.1| | 1 |
| Headlamp aim projected beam image is obviously incorrect both opaque (4.1.2 (c)) | 1 |
| Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired floor (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch holed (6.2.2 (d) (i)) | 1 |
| Rear Exhaust emissions likely to be affected by an exhaust leak joint& hole front of rear joint (8.2.1.1 (b)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength above anti roll bar bush/bracket (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassie leg |2.4.A.3| | 1 |
| Offside Outer Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Outer Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired chassis rail |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired chassis rail |5.3.6 |a| |i|| | 1 |
| Nearside Front Upper Steering locking device missing split pin missing |2.1.3 |d|| | 1 |
| Offside Front Upper Steering locking device missing split pin missing |2.1.3 |d|| | 1 |
| Emissions unable to be completed Due to excessive blow (8.2.1.2 (d)) | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill in places |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill in places |6.1.B.2| | 1 |
| Offside Front Upper Suspension arm locating pin locking device missing split pin |2.4.G.3b| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced @ OSR of vehicle. |6.1.1 |c| |i|| | 1 |
| Nearside Front Brake hose excessively damaged Ferrules Excess. Corroded Causing Damage |1.1.12 |b| |ii|| | 1 |
| Offside Front Brake hose excessively damaged Ferrules Excess. Corroded Causing Damage |1.1.12 |b| |ii|| | 1 |
| Offside Rear Brake hose excessively damaged Ferrules Excess. Corroded Causing Damage |1.1.12 |b| |ii|| | 1 |
| Nearside Rear Brake hose excessively damaged Ferrules Excess. Corroded Causing Damage |1.1.12 |b| |ii|| | 1 |
| Nearside Rear Inner Anti-roll bar pin or bush excessively worn `D` Bush |5.3.4 |a| |i|| | 1 |
| Offside Rear Inner Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Sill - Whole Length |6.1.1 |c| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg @ Front |6.1.1 |c| |i|| | 1 |
| Offside Rear Body panel corroded and likely to cause injury Arch |6.2.1 |a| |i|| | 1 |
| Brake performance not tested Due to chassis condition |1.2.1 |g|| | 1 |
| Offside Front Upper Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 1 |
| Nearside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 1 |
| Offside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 1 |
| Emissions not tested misfire |7.3.A.1| | 1 |
| Offside Front Power steering pipe|s| or hose|s| excessively corroded |2.3.2| | 1 |
| Emissions not tested belt broken |8.2.1.2 |d|| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings both outer sills ex corroson / holed |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor holed |6.1.B.2| | 1 |
| Offside Front Steering rack gaiter split leaking |2.2.D.2d| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced body sill corroded (7.1.1 (a) (i)) | 1 |
| Nearside Rear Parking brake inoperative on one side handbrke lever has excessive travel (1.4.1 (a)) | 1 |
| Offside Front Upper Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner sill |6.2.2 |d| |ii|| | 1 |
| Rear Service brake effort inadequate at a wheel Both |1.2.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill marked yellow |7.1.1 |a| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg |6.1.1 |c| |i|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis |6.2.2 |d| |i|| | 1 |
| Rear Suspension arm corroded and seriously weakened x2 |2.4.G.1| | 1 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering x2 marked |6.1.A.1| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x2 marked |6.1.B.2| | 1 |
| Offside Outer Rear Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Brake pedal has insufficient reserve travel both rear brakes have air in system |1.1.2 |a|| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected cross member, chalked yellow next to roll bar links |5.3.6 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected cross member, chalked yellow next to roll bar links |5.3.6 |a| |ii|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Both rear outer sills (7.1.1 (a) (i)) | 1 |
| Nearside Rear Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Nearside Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii)) | 1 |
| Offside Integral body structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Rear Exhaust emissions likely to be affected by an exhaust leak Silencer (8.2.1.1 (b)) | 1 |
| Exhaust has a major leak of exhaust gases tail pipe of |7.1.2| | 1 |
| Rear Lower Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section |5.3.6 |a| |i|| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis section |5.3.6 |a| |i|| | 1 |
| Offside Headlamp not working on dipped beam can not check aim |1.7.5a| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill marked |5.2.6| | 1 |
| Offside Brake pedal anti-slip provision missing |3.3.A.1b| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded Outer sill section |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded Inner sill section |5.2.6| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to sill return |6.1.B.2| | 1 |
| Offside Rear Lower Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Front Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Tie bar/rod insecure |2.4.G.1| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded Floor to sill |5.2.6| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill/floor next to A-post |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill/floor next to A-post |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill close to A post |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength inner sill close to wheel arch |2.4.A.3| | 1 |
| Central Brake pipe excessively damaged (1.1.11 (c)) | 1 |
| Offside Shock absorber insecure |2.7.2b| | 1 |
| Offside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced centre and rear sill holed in 2 places (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis above front roll bar mount (5.3.6 (a) (i)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak Leaking on join between middle and back box (8.2.1.1 (b)) | 1 |
| Nearside Front Brake pipe stretched |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Exhaust has a major leak of exhaust gases rear of front pipe. |6.1.2 |a|| | 1 |
| Nearside Parking brake inoperative on one side + o/s very low (1.4.1 (a)) | 1 |
| Front Windscreen wiper not working |3.4 |a|| | 1 |
| Central Rear Brake pipe leaking on a hydraulic braking system Front to rear brake pipe corroded and burst at rear (1.1.11 (b) (ii)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leg. |5.3.6 |a| |i|| | 1 |
| Exhaust emits clearly visible black smoke during acceleration |8.2.1.2 |g|| | 1 |
| Offside Rear Integral body structure is fractured and structural rigidity is significantly reduced sill (6.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded rear of outer sill |5.2.6| | 1 |
| Front Brake pipe leaking on a hydraulic braking system to rear pipe (1.1.11 (b) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Next to upper suspension arm |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Next to upper suspension arm |2.4.A.3| | 1 |
| Nearside Rear Suspension arm attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Position lamp showing red light to the front green light (4.2.3 (a) (ii)) | 1 |
| Offside Position lamp showing red light to the front green light (4.2.3 (a) (ii)) | 1 |
| Front Hand operated control valve control cannot be moved over its full travel |3.2.1c| | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Front Position lamp not working Both sides |4.2.1 |a|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis holed (6.2.2 (d) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded main chassis under arch |2.4.A.3| | 1 |
| Offside Rear Rear fog lamp emits a light other than red lens or bulb tint faded small white area on lens |1.3.2e| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor sill area |5.2.6| | 1 |
| Offside Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases exhaust blowing at centre joint |6.1.2 |a|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg corroded |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg corroded |5.3.6 |a| |i|| | 1 |
| Brake performance not tested vehicle cut out on test |1.2.1 |g|| | 1 |
| Emissions not tested emissions not tested due to vehicle cutting out. |8.2.1.2 |d|| | 1 |
| Exhaust has a major leak of exhaust gases rear exhaust joint/ heavily corroded (6.1.2 (a)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill end (7.1.1 (a) (i)) | 1 |
| Offside Front Windscreen wiper blade missing (3.4 (b) (ii)) | 1 |
| Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Both outer sill panels corroded to excess (6.2.2 (d) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded INNER WHEEL ARCH |5.2.6| | 1 |
| Nearside Wheel nut|s| missing |4.2.A.1e| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (Inner & Outer Sill) (7.1.1 (a) (i)) | 1 |
| Offside Rear Hydraulic brake calliper leaking by hand brake arm (1.1.16 (b) (i)) | 1 |
| Offside Rear wheel cylinder leaking |3.6.A.1| | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced chassis corroded by front suspension. |6.1.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis corroded by front subframe mounting. |5.3.6 |a| |i|| | 1 |
| Nearside Front position lamp|s| not working side light |1.1.A.3b| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center floor to inner sill as marked |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to inner sill as marked |6.1.B.2| | 1 |
| Nearside Front Track rod end ball joint has excessive play as marked |2.2.B.1f| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded undersill |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded undersill |5.2.6| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail |can be seen from engine bay| |6.1.1 |c| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan/sill, |within 30cm of seat mountings| |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength underside of chassis leg in front of anti roll bar attachment (5.3.6 (a) (i)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits c.o max - 0.20 (8.2.1.2 (b)) | 1 |
| Offside Front Suspension component mounting prescribed area is severely distorted Chassis |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Outer sill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arm and linkage area |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arm linkage area |5.3.6 |a| |i|| | 1 |
| Nearside Front Lower Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Rear Upper Anti-roll bar linkage missing |2.4.G.1| | 1 |
| Offside Front Suspension component mounting prescribed area is severely distorted inner wing |2.4.A.3| | 1 |
| Central Front Lower Seat belt anchorage prescribed area is excessively corroded floor area |5.2.6| | 1 |
| Body component damaged and likely to cause injury front bumper (6.2.1 (a) (i)) | 1 |
| Front Headlamp aim not tested both (4.1.2 (b)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/chassis (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced corrosion (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced corrosion (7.1.1 (a) (i)) | 1 |
| Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits see emission sheet (8.2.1.2 (b)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Offside sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension arm insecurely attached bolt loose (5.3.3 (a) (i)) | 1 |
| Offside coil spring broken |2.4.C.1a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner wheel arch in places |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Chassis in places |2.4.A.3| | 1 |
| Rear Exhaust has a major leak of exhaust gases Join |7.1.2| | 1 |
| Offside Front Anti-roll bar linkage corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sills |2.4.A.3| | 1 |
| Emissions not tested due to excessive exhaust blow |7.3.A.1| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is fractured floor |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is fractured floor |5.2.6| | 1 |
| Offside Rear Anti-roll bar linkage ball joint likely to become detached Has become detached (5.3.4 (a) (ii)) | 1 |
| Emissions not tested vehicle overheated |7.3.A.1| | 1 |
| Nearside Rear Brake hose excessively damaged |3.6.B.4d| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under wheel arch |6.1.B.2| | 1 |
| Emissions unable to be completed engine misfire (8.2.1.2 (d)) | 1 |
| Nearside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt drop link |5.3.4 |b| |ii|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill small hole (6.1.1 (c) (i)) | 1 |
| Front coil spring broken |2.4.C.1a| | 1 |
| Offside Outer Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced x2 places (6.1.1 (c) (i)) | 1 |
| Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid |1.1.16 |b| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x2 (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x2 (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner wheel arch |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill |7.1.1 |a| |i|| | 1 |
| Front Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Nearside Rear Shock absorbers likely to become detached bolt missing (5.3.2 (a) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded SILL |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded lower sill |5.2.6| | 1 |
| Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction Sun strip across top of windscreen (3.1 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases Middle to rear section (6.1.2 (a)) | 1 |
| Emissions unable to be completed Major exhaust leak (8.2.1.2 (d)) | 1 |
| Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Nearside front chassis near anti roll bar mounting (6.2.2 (d) (i)) | 1 |
| Front Power steering pipe|s| or hose|s| excessively corroded lower along steering rack |2.3.2| | 1 |
| Front Power steering pipe|s| or hose|s| leaking lower along steering rack |2.3.3b| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Offside inner sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch |5.3.6 |a| |i|| | 1 |
| Rear Exhaust has a major leak of exhaust gases joint broken |6.1.2 |a|| | 1 |
| Front Service brake lagging in operation both |1.2.1 |d|| | 1 |
| Rear Service brake grabbing severely (1.2.1 (c)) | 1 |
| Seat belt anchorage prescribed area is excessively corroded osr |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded nsr |5.2.6| | 1 |
| Nearside Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded under wing |2.4.A.3| | 1 |
| Offside Vehicle structure is fractured and structural rigidity is significantly reduced floor (6.1.1 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor (6.1.1 (c) (i)) | 1 |
| Offside Front Anti-roll bar linkage has excessive play in a ball joint Adrift |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in chassis by front sub frame (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Suspension component pin or bush excessively worn shocker bush |5.3.4 |a| |i|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Offside Rear Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Anti roll bar detached due to corrosion |5.3.6 |a| |ii|| | 1 |
| Offside Rear Lower Shock absorbers likely to become detached Shock absorber fixing |5.3.2 |a| |ii|| | 1 |
| Offside Rear Lower Suspension arm corroded and seriously weakened Wish bone attachment |5.3.3 |b| |i|| | 1 |
| Front Horn not working |7.7 |a| |ii|| | 1 |
| Emissions not tested due to excessive exhaust leak |8.2.1.2 |d|| | 1 |
| Front Exhaust emissions likely to be affected by an exhaust leak |8.2.1.1 |b|| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded and holed |7.1.1 |a| |i|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Nearside Rear quadrant (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Offside Rear quadrant (7.1.1 (a) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i|| | 1 |
| Front Shock absorbers has a serious fluid leak both |5.3.2 |b|| | 1 |
| Emissions unable to be completed Vehicle over heated (8.2.1.2 (d)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength near front of suspension arm |marked| |5.3.6 |a| |i|| | 1 |
| Front Horn not working (7.7 (a) (ii)) | 1 |
| Offside Front Steering locking device ineffective (2.1.3 (d)) | 1 |
| Nearside Front Steering retaining device missing track rod end |2.2.C.1g| | 1 |
| Offside Front Steering retaining device insecure track rod end |2.2.C.1g| | 1 |
| Nearside Front Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Rear Parking brake inoperative on one side both rear |1.4.1 |a|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sill |5.2.6| | 1 |
| Battery insecure and likely to cause a short circuit wiring rubbing against body (4.13 (a) (ii)) | 1 |
| Emissions not tested potential over heating due to missing water pump/alternator belt (8.2.1.2 (d)) | 1 |
| Central Exhaust has a major leak of exhaust gases silencer |7.1.2| | 1 |
| Offside Front Drag link end socket spring broken |2.2.B.1e| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6| | 1 |
| Offside Brake pipe at imminent risk of failure or fracture front to rear (1.1.11 (a)) | 1 |
| Nearside Front Brake pipe leaking |3.6.A.1| | 1 |
| Offside Rear Tie bar/rod attachment bracket/mounting insecure bolt missing |2.4.G.1| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
| Offside Rear Service brake imbalanced across an axle (1.2.1 (b) (i)) | 1 |
| Nearside Rear Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
| Offside Rear Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
| Offside Front Suspension component leaking (5.3.5 (c)) | 1 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt Upper and lower ball joints (5.3.4 (b) (ii)) | 1 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt Upper and lower ball joints (5.3.4 (b) (ii)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x2 |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings x2 |6.1.B.2| | 1 |
| Nearside Front position lamp|s| obviously incorrectly positioned |1.1.A.3a| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases Blowing Catalytic Converter section |7.1.2| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill panel |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill panel |6.1.1 |c| |i|| | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits Lambda Reading Too High (8.2.1.2 (c)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor As Marked |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor As Marked |6.1.B.2| | 1 |
| Emissions not tested due to engine fault |7.3.A.1| | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting insecure bolt missing |5.3.3 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Sub-frame has a fracture which is likely to adversely affect braking or steering bolt snapped |6.1.1 |a| |ii|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill and inner wheel arch lip |6.1.1 |c| |ii|| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill |6.1.B.2| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded FLOOR AREA NEXT TO SILL |5.2.6| | 1 |
| Offside Front Suspension arm corroded and seriously weakened At shock absorber mounting area (5.3.3 (b) (i)) | 1 |
| Nearside Rear Body panel corroded and likely to cause injury Wing to sill area |6.2.1 |a| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor to sill area |6.1.1 |c| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis area (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis area (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill area (6.1.1 (c) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Two Inner sill areas |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced At inner arch area |7.1.1 |a| |i|| | 1 |
| Nearside Front Brake pipe at imminent risk of failure or fracture insecure (1.1.11 (a)) | 1 |
| Offside Front Brake pipe at imminent risk of failure or fracture insecure (1.1.11 (a)) | 1 |
| Nearside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced repaired with body filler (6.1.1 (d) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases Down pipe |7.1.2| | 1 |
| Nearside Front Upper Suspension arm locating pin locking device not properly locked Thread not long enough through nut |2.4.G.3b| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded Sill as marked |5.2.6| | 1 |
| Offside Front Brake hose leaking |3.6.A.1| | 1 |
| Offside Front Lower Suspension arm locating pin locking device not properly locked |2.4.G.3b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded as marked |2.4.A.3| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded Sill as marked |5.2.6| | 1 |
| Nearside Front Anti-roll bar linkage insecurely attached linkage broken (5.3.3 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded OUTER SILL |2.4.A.3| | 1 |
| Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings Outer sills both sides |6.1.B.2| | 1 |
| Driver`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
| Front brake disc inappropriately repaired |3.5.1n| | 1 |
| Centre Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front Front suspension locking device missing |2.5.A.4| | 1 |
| Offside Rear Direction indicators incorrect colour |1.4.A.2f| | 1 |
| Nearside Front Suspension arm pin or bush excessively worn front arm, rear bush (5.3.4 (a) (i)) | 1 |
| Nearside Front Suspension arm ball joint likely to become detached split pin missing (5.3.4 (a) (ii)) | 1 |
| Offside Front Suspension arm ball joint likely to become detached split pin missing (5.3.4 (a) (ii)) | 1 |
| Rear Exhaust silencer likely to become detached |8.1.1 |b| |ii|| | 1 |
| Nearside Front Steering component mounting prescribed area is excessively corroded chassis leg |2.2.C.1h| | 1 |
| Offside Front Steering component mounting prescribed area is excessively corroded chassis leg |2.2.C.1h| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear sill as marked within 30cm of seat belt mounting and suspension point (6.2.2 (d) (i)) | 1 |
| Nearside Front Coil spring insecure the spring does not correctly locate when the suspension is returned to its normal running position, (5.3.1 (a) (i)) | 1 |
| Offside Front Coil spring insecure the spring does not correctly locate when the suspension is returned to its normal running position, (5.3.1 (a) (i)) | 1 |
| Offside Rear Coil spring insecure the spring does not correctly locate when the suspension is returned to its normal running position, (5.3.1 (a) (i)) | 1 |
| Rear Fuel tank leaking (6.1.3 (b) (i)) | 1 |
| Offside Rear Lower Suspension arm has excessive play in a pin/bush front inner |2.4.G.2| | 1 |
| Offside Front Anti-roll bar linkage ball joint likely to become detached Is detatched (5.3.4 (a) (ii)) | 1 |
| Offside Brake pipe leaking on a hydraulic braking system middle leaking from joint (1.1.11 (b) (ii)) | 1 |
| Nearside Rear Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 1 |
| Offside Rear Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 1 |
| Rear Exhaust has a major leak of exhaust gases centre to rear silencer joint (6.1.2 (a)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits 1.23 (8.2.1.2 (c)) | 1 |
| All position lamps adversely affected by the operation of another lamp Hazards affecting all other lamps (4.2.3 (c)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sills corroded through rear/nsf (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corroded and holed at antiroll bar mounting (6.1.1 (c) (i)) | 1 |
| Rear Parking brake inoperative on one side Both side (1.4.1 (a)) | 1 |
| Offside Headlamp insecure |4.1.1 |c|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength innerwing @ anti roll bar mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Brake hose leaking on a hydraulic braking system |1.1.12 |c| |ii|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Fuel cap/sealing device ineffective Tempory fuel cap fitted (6.1.3 (b) (i)) | 1 |
| Nearside Front Lower Suspension component ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Nearside Rear Valve stem seriously damaged stem perished and split almost all the way through |5.2.3 |j|| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Middle inner sill holed |6.1.B.2| | 1 |
| Nearside Front Brake pipe stretched |found during steering lock to lock check| Flex pipe too short |2.2.D.2b| | 1 |
| Offside Front Brake pipe stretched |found during steering lock to lock check| Flex pipe too short and kinked |2.2.D.2b| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill large corrosion hole |7.1.1 |a| |i|| | 1 |
| Nearside Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Main chassis leg marked yellow (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Main chassis leg marked yellow (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wheel arch marked yellow (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wheel arch marked yellow (6.2.2 (d) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
| Offside Front Brake master cylinder/servo mounting prescribed area is inadequately repaired by brake servo (1.1.21 (e) (i)) | 1 |
| Power steering pump drive system missing no belt fitted |2.3.6| | 1 |
| Exhaust has a major leak of exhaust gases centre section not sealed |7.1.2| | 1 |
| Offside rear brake recording little or no effort park brake |3.7.B.5a| | 1 |
| Nearside Rear Brake pipe leaking on a hydraulic braking system feed pipe to offside rear caliper |1.1.11 |b| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases rear silencer has several holes |6.1.2 |a|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both outer rear sills |6.2.2 |d| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both rear arches |6.2.2 |d| |i|| | 1 |
| Brake performance not tested due to brake pipe leaking |1.2.1 |g|| | 1 |
| Offside Rear Brake lever has restricted free movement park brake lever at caliper |1.1.15 |e|| | 1 |
| Exhaust has a major leak of exhaust gases centre joint |6.1.2 |a|| | 1 |
| Emissions not tested clearly wont pass with exhaust blowing but c.o too high too .7% |8.2.1.2 |d|| | 1 |
| Suspension component mounting prescribed area is excessively corroded both front chassis inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded Outer sill |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear outer sill |7.1.1 |a| |i|| | 1 |
| Headlamp incorrect colour |1.7.5b| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area fractured significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/suspension mounting/seat belt anchorage (6.1.1 (c) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill rusted through |7.1.1 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded in wheel arch |5.2.6| | 1 |
| Emissions not tested exhaust is blowing so can not get a proper reading (8.2.1.2 (d)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill front and rear (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting suspenshion mouting (6.2.2 (d) (i)) | 1 |
| Offside Rear Position lamp showing white light to the rear |4.2.3 |a| |ii|| | 1 |
| Speedometer clearly inoperative |7.8 |b| |ii|| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor holed in two places |6.1.B.2| | 1 |
| Offside Front Side repeater missing |1.4.A.2b| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Offside Front Seat belt retracting mechanism defective Seat belt does not retract (7.1.2 (e)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength underside of sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength underside of sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength corner of sill (5.3.6 (a) (i)) | 1 |
| Front Power steering pipe/hose leaking pipe attached to rack is leaking (2.1.5 (a)) | 1 |
| Offside Rear Lower Suspension component corroded and seriously weakened wishbone |5.3.3 |b| |i|| | 1 |
| Emissions not tested excessive exhaust leak |8.2.1.2 |d|| | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Front Anti-roll bar linkage fractured |2.4.G.1| | 1 |
| Nearside Rear Hydraulic brake calliper leaking brake caliper leaking under pressure (1.1.16 (b) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg at suspension mounting and sub frame mounting (5.3.6 (a) (i)) | 1 |
| Front Headlamp has a product on the lens so that the light output is severely reduced Both (4.1.4 (b)) | 1 |
| Rear Brake disc contaminated both sides (1.1.14 (b)) | 1 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Position lamp not working both front |4.2.1 |a| |ii|| | 1 |
| Headlamp levelling device inoperative Both sides (4.1.5 (a)) | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 1 |
| Nearside Front Lower Macpherson strut pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Front Lower Macpherson strut pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Front position lamp|s| incorrect colour blue bulbs fitted |1.1.A.3e| | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides chassis rail by (d)bushes (6.1.1 (c) (i)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides inner chassis rail (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet chassis rail (6.1.1 (c) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides outer sill (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides floor to inner sills (6.1.1 (c) (i)) | 1 |
| Nearside Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 1 |
| Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt both sides (5.3.4 (b) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired floor pan (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired floor pan (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired chassis (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases centre to rear (6.1.2 (a)) | 1 |
| Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage fractured (5.3.3 (b) (ii)) | 1 |
| Inner Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 1 |
| Headlamp lens seriously defective osf nsf (4.1.1 (b) (ii)) | 1 |
| Body has a sharp edge caused by corrosion both rear wheel arches |6.1.C.1| | 1 |
| Seat belt anchorage prescribed area is excessively corroded both sides floors holed under seat mounts |5.2.6| | 1 |
| Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Inner Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Front passenger door cannot be opened from inside the vehicle Or outside (6.2.3 (a)) | 1 |
| Offside Rear Service brake grabbing severely Grab then going free (1.2.1 (c)) | 1 |
| Brake performance unable to be tested due to rear brakes (1.2.1 (g)) | 1 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded shock absorber mounting |2.4.A.3| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded shock absorber mounting |2.4.A.3| | 1 |
| Offside Front Headlamp light intensity severely reduced image obviously wrong bulb fitment |4.1.4 |a|| | 1 |
| Offside Front Headlamp insecure |4.1.1 |c|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre under sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under anti-roll bar mount |5.3.6 |a| |i|| | 1 |
| Front Exhaust has a major leak of exhaust gases pipe to manifold |6.1.2 |a|| | 1 |
| Centre Brake pipe seriously damaged |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded rear of sill |5.2.6| | 1 |
| Nearside Front Braking system leaking Caliper piston seals |3.6.A.1| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wing (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wing (6.1.1 (c) (i)) | 1 |
| Offside Front Outer Vehicle structure has excessive corrosion which adversely affects braking or steering leg (6.1.1 (c) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Inner sill at floor |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Inner sill at floor |5.2.6| | 1 |
| Offside Front Outer Anti-roll bar attachment bracket/mounting corroded and seriously weakened Chassis leg |5.3.3 |b| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill holed and corroded (7.1.1 (a) (i)) | 1 |
| Nearside Electrical wiring insecure head light |1.9.2a| | 1 |
| Nearside Front Electrical wiring insecure and in contact with sharp edges |4.11 |a| |ii|| | 1 |
| Offside Front Electrical wiring insecure and in contact with sharp edges |4.11 |a| |ii|| | 1 |
| Electrical wiring likely to touch hot or rotating parts (4.11 (a) (iii)) | 1 |
| Power steering pipe/hose leaking to steering rack (2.1.5 (a)) | 1 |
| Offside Front Anti-roll bar linkage ball joint likely to become detached is detached (5.3.4 (a) (ii)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired undersill |6.2.2 |d| |ii|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired undersill |6.2.2 |d| |ii|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| All direction indicators not working all flashers not woring |4.4.1 |a| |ii|| | 1 |
| Emissions not tested Leaking at front pipe (8.2.1.2 (d)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outside sill (7.1.1 (a) (i)) | 1 |
| rear brake recording little or no effort Offside |3.7.B.5a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded anti roll bar and top suspension arm |2.4.A.3| | 1 |
| Offside Windscreen wiper blade missing (3.4 (b) (ii)) | 1 |
| Nearside Front Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i)) | 1 |
| Emissions not tested vehicle overheating |7.3.A.1| | 1 |
| Offside Outer Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
| Rear Exhaust system not adequately supported Mount |7.1.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner leg |6.1.1 |c| |ii|| | 1 |
| Offside Rear Vehicle structure inadequately repaired such that structural rigidity is significantly reduced sill (6.1.1 (d) (i)) | 1 |
| Front Position lamp not working both sides (4.2.1 (a) (ii)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch chassi area |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch chassi area |6.1.B.2| | 1 |
| Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel Arch (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases Tail Box (6.1.2 (a)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength excessive corrosion to front of chassis area within 30cm of antiroll bar mounting / suspension mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill, repaired by hidden body filler |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced lower sill |7.1.1 |a| |i|| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak near catylist, emissions test aborted due to abnormal high reading |8.2.1.1 |b|| | 1 |
| Emissions not tested vehicle stopped running during the test and would not restart . Unable to complete the test (8.2.1.2 (d)) | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting insecure mounting bracket in wheel arch has a bolt missing (5.3.3 (a) (i)) | 1 |
| Parking brake not fitted on at least two wheels |3.1.1| | 1 |
| Offside Steering component deformed and unserviceable |2.2.C.1d| | 1 |
| Nearside Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Offside Side repeater does not face the side |1.4.A.2b| | 1 |
| Side repeater not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect lens misted (4.1.2 (c)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect lens misted (4.1.2 (c)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis legg |2.4.A.3| | 1 |
| Offside Rear Lower Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded | sill | |2.4.A.3| | 1 |
| Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Offside Driver`s seat insecure |6.2.5 |a| |ii|| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid calipier |3.6.A.1| | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting rivet missing |2.4.G.1| | 1 |
| Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt both front lower ball joint dust covers (5.3.4 (b) (ii)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch corroded (hole) (7.1.1 (a) (i)) | 1 |
| Nearside Headlamp not working on dipped beam bad connection |1.7.5a| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill panel (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/chassis (5.3.6 (a) (i)) | 1 |
| Brake pipe leaking on a hydraulic braking system Front to Rear (1.1.11 (b) (ii)) | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
| Offside Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill |7.1.1 |a| |i|| | 1 |
| Inner Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting nut missing |2.4.G.1| | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Steering system fouling undershield loose and fouling nearside track rod |2.2.D.2a| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 1 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded SILL |2.4.A.3| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded SILL |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits test aborted (8.2.1.2 (c)) | 1 |
| Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill corner, and inside wheel arch/ finishing panel (5.3.6 (a) (i)) | 1 |
| Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid caliper |3.6.A.1| | 1 |
| Rear Exhaust has a major leak of exhaust gases silencer |6.1.2 |a|| | 1 |
| Emissions not tested due centre exhasut box blowing |8.2.1.2 |d|| | 1 |
| Central Front Exhaust has a major leak of exhaust gases cat |6.1.2 |a|| | 1 |
| Emissions not tested due to brocken |7.3.A.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor |7.1.1 |a| |i|| | 1 |
| Nearside Front Anti-lock braking system wiring excessively damaged (1.6 (d)) | 1 |
| Emission control equipment obviously defective (8.2.2.1 (a)) | 1 |
| Nearside Headlamp not working on main beam headlamp goes out when switch main beam on (4.1.1 (a) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor corroded through within prescribed area (7.1.1 (a) (i)) | 1 |
| Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid flexi to caliper (1.1.16 (b) (i)) | 1 |
| Nearside Seat belt not functioning as intended unable to engage (7.1.2 (c)) | 1 |
| Emissions unable to be completed Engine overheats on second fast ildle check (8.2.1.2 (d)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sil (6.1.1 (c) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill panel |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill panel |7.1.1 |a| |i|| | 1 |
| Central Rear Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
| Exhaust system not adequately supported support brackets broken at centre and rear sections. |7.1.1| | 1 |
| Front Power steering pipe|s| or hose|s| excessively corroded across front axle power steering pipes excessively corroded. |2.3.2| | 1 |
| Nearside Front Headlamp incorrect colour |1.7.5b| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill has a hole caused by corrosion |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill has a hole caused by corrosion |7.1.1 |a| |i|| | 1 |
| Front Lower Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting fractured |5.3.3 |b| |ii|| | 1 |
| Front Upper Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded end of inner sill |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti-roll bar mounting area (5.3.6 (a) (i)) | 1 |
| Offside Front Front position lamp|s| not working sidelight |1.1.A.3b| | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL |7.1.1 |a| |i|| | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL |7.1.1 |a| |i|| | 1 |
| Offside Body component damaged and likely to cause injury mirror (6.2.1 (a) (i)) | 1 |
| Offside Rear Upper coil spring fractured |2.4.C.1a| | 1 |
| Nearside Front Steering arm deformed (2.1.3 (c) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer side body sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering outer side chassis member |6.1.1 |c| |ii|| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre inner sill |6.1.B.2| | 1 |
| Offside Front Tie bar/rod worn and seriously weakened detached |2.4.G.1| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering chassis corroded by o/s front and behind plastic panels chalked up (6.1.1 (c) (ii)) | 1 |
| Nearside Rear Upper Coil spring fractured or broken snapped (5.3.1 (b) (i)) | 1 |
| Offside Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings end sill rear outer corroded n/side |6.1.B.2| | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a ball joint Drop link snapped |2.4.G.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail (6.1.1 (c) (ii)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill excessively
corroded (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill excessively corroded (6.2.2 (d) (i)) | 1 |
| Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
| Front Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Nearside Front Electrical wiring insecure abs |1.9.2a| | 1 |
| Offside Rear Lower Suspension arm corroded and seriously weakened wishbone-as marked |2.4.G.1| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded both chassis rails - as marked |2.4.A.3| | 1 |
| brake disc in such a condition that it is seriously weakened all 4 |3.5.1i| | 1 |
| Nearside Main beam `tell-tale` not working |1.7.4c| | 1 |
| Offside Front Lower Steering locking device missing (2.1.3 (d)) | 1 |
| Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Front Driver`s airbag obviously defective |5.4.1| | 1 |
| Nearside Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
| Nearside Front Undertray likely to become detached wheel arch |6.2.1 |a| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases BACKBOX CLAMP |6.1.2 |a|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/ floor area (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front chassis section inside wheel arch area (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front chassis section in wheel arch area (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength adjacent to anti - roll bar (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases rear to centre joiner (6.1.2 (a)) | 1 |
| Nearside Front Suspension arm ball joint likely to become detached nut locking split pin missing (5.3.4 (a) (ii)) | 1 |
| Fluid leaking continuously posing a serious risk to road safety |8.4.1 |a| |ii|| | 1 |
| Nearside Rear Body has an unsafe modification outer sill corroded/bodyfiller |6.2.1 |d| |i|| | 1 |
| Offside Front Coil spring fractured or broken top of spring broken |5.3.1 |b| |i|| | 1 |
| Nearside Upper Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Nearside Lower Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Offside Lower Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s outer sill and o/s and n/s front chassis (5.3.6 (a) (i)) | 1 |
| Emissions not tested rear exhaust silencer detatched |8.2.1.2 |d|| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak rear silencer |8.2.1.1 |b|| | 1 |
| Nearside Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Anti-roll bar has excessive play in a ball joint fell off |2.4.G.2| | 1 |
| Emissions not tested cut out during test and wont restart |8.2.1.2 |d|| | 1 |
| Brake performance not tested vehicle cut out during test and wont restart |1.2.1 |g|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis at roll bar mounting area |2.4.A.3| | 1 |
| Offside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Vehicle structure inadequately repaired such that it is likely to adversely affect braking or steering CHASSIS (6.1.1 (d) (ii)) | 1 |
| Emissions unable to be completed CAT REMOVED. (8.2.1.2 (d)) | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired OUTER SILL (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced FLOOR TO SILL (7.1.1 (a) (i)) | 1 |
| Rear Stop lamp not working centre |1.2.1b| | 1 |
| Offside Front Upper Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Nearside Indicator tell tale inoperative |1.4.A.2a| | 1 |
| Offside Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded anti rollbar mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded anti rollbar mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6| | 1 |
| Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassie |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 1 |
| Nearside Rear Lower Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Exhaust has a major leak of exhaust gases Middle section |7.1.2| | 1 |
| Offside Rear Suspension arm corroded and seriously weakened holed (5.3.3 (b) (i)) | 1 |
| Nearside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch (6.2.2 (d) (i)) | 1 |
| Nearside Rear brake disc excessively pitted (3.5.1h) | 1 |
| Offside Rear brake disc excessively pitted (3.5.1h) | 1 |
| Offside Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases (7.1.2) | 1 |
| Parking brake: efficiency below requirements (3.7.B.7) | 1 |
| Offside Rear Rear fog lamp emits a light other than red (1.3.2e) | 1 |
| Nearside Front brake disc excessively pitted (3.5.1h) | 1 |
| Offside Front brake disc excessively pitted (3.5.1h) | 1 |
| Offside Front Windscreen wiper not operating automatically when switched on (8.2.1b) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
| Nearside Front Lower Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Front Exhaust emissions likely to be affected by an exhaust leak flange |8.2.1.1 |b|| | 1 |
| Central Exhaust has a major leak of exhaust gases join (6.1.2 (a)) | 1 |
| Rear Exhaust has a major leak of exhaust gases join (6.1.2 (a)) | 1 |
| Emissions not tested engine stopped (8.2.1.2 (d)) | 1 |
| Nearside Rear Integral body structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Nearside Side repeater incomplete |1.5.A1b| | 1 |
| Exhaust has a major leak of exhaust gases Rear |7.1.2| | 1 |
| Front Headlamp has a product on the light source so that the light output is severely reduced both sides (4.1.4 (b)) | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering wheel arch (6.1.1 (c) (ii)) | 1 |
| Headlamp not working on main beam off side front |4.1.1 |a| |ii|| | 1 |
| Service brake excessively binding off side front |1.2.1 |f|| | 1 |
| Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor corroded and holed (7.1.1 (a) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under drivers seat main support (6.1.1 (c) (i)) | 1 |
| Offside Rear Floor excessively deteriorated near tow eye (6.2.4 (a) (i)) | 1 |
| Nearside Rear Floor excessively deteriorated near tow eye (6.2.4 (a) (i)) | 1 |
| Nearside Rear Outer Vehicle structure inadequately repaired such that structural rigidity is significantly reduced sil (6.1.1 (d) (i)) | 1 |
| Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sil (6.2.2 (d) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill corroded (7.1.1 (a) (i)) | 1 |
| Nearside Rear Wheel hub badly damaged |4.2.B.4| | 1 |
| Offside Front Brake hose stretched |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Nearside Headlamp aim beam image obviously incorrect head light lens deteriorated and misted resulting in no beam image |1.8.A.1b| | 1 |
| Offside Headlamp aim beam image obviously incorrect head light lens deteriorated and misted resulting in no beam image |1.8.A.1b| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch @ front on chassis rail holed & corroded |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch @ front on chassis rail holed & corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill area (5.3.6 (a) (i)) | 1 |
| Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill been repaired with filler |7.1.1 |a| |i|| | 1 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill been repaired with filler |7.1.1 |a| |i|| | 1 |
| Rear Exhaust has a major leak of exhaust gases back box tail pipe |7.1.2| | 1 |
| Nearside Front Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Inner Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Nearside Direction indicators not working |1.4.A.2c| | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outter sill |6.2.2 |d| |i|| | 1 |
| Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outter sill |6.2.2 |d| |i|| | 1 |
| Exhaust has a major leak of exhaust gases |center section| |6.1.2 |a|| | 1 |
| front brake binding both binding on |3.7.B.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis at inner arch |6.1.B.2| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both front chassis legs foreward of subframe mounts and by rollbar mounts |6.1.1 |c| |i|| | 1 |
| Emissions unable to be completed SMOKING (8.2.1.2 (d)) | 1 |
| Nearside Front Hazard warning lamps inoperative WING (4.4.1 (e)) | 1 |
| Nearside Front Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Front Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill outer |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre inner sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill |7.1.1 |a| |i|| | 1 |
| Headlamp aim not tested due to n/s/f dip beam bulb not working (4.1.2 (b)) | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6| | 1 |
| Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced rear of sill (7.1.1 (a) (i)) | 1 |
| Power steering pipe/hose corroded such that the steering is adversely affected |2.1.5 |g| |ii|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill within 30cm of lower seatbelt mount (7.1.1 (a) (i)) | 1 |
| Anti-roll bar linkage has excessive play in a ball joint osr snapped |2.4.G.2| | 1 |
| Nearside Headlamps matched pair are not the same colour (4.1.4 (d)) | 1 |
| Offside Front Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner and outer sill |5.2.6| | 1 |
| Rear Fuel tank leaking |7.2.3| | 1 |
| Brake performance not tested rear brakes very badly binding |1.2.1 |g|| | 1 |
| Nearside Front Hydraulic brake cylinder leaking hydraulic fluid |1.1.16 |b| |i|| | 1 |
| Offside Front Hydraulic brake cylinder leaking hydraulic fluid |1.1.16 |b| |i|| | 1 |
| Nearside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Nearside Front Steering lock stop insecurely locked |2.2.D.2c| | 1 |
| Rear Exhaust has a major leak of exhaust gases rear section (6.1.2 (a)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail |6.1.A.1| | 1 |
| Nearside Rear Brake hose connection leaking on an air braking system (1.1.12 (c) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Quarter panel |7.1.1 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
| Emissions not tested engine overheated (8.2.1.2 (d)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis at Anti-roll bar mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis within distance of top wishbone mountings (5.3.6 (a) (i)) | 1 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid caliper leaking |3.6.A.1| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail by anti roll bar mount |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail by anti roll bar mount |5.3.6 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Both rear inner sills several places (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area excessively damaged significantly reducing structural strength Floor (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Both rear inner arch???s (7.1.1 (a) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis within 30cm of antiroll bar mounting |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded within 30cm of antiroll bar mounting |2.4.A.3| | 1 |
| Nearside Rear brake caliper inappropriately repaired fowling wheel and pads braking on less than half of the disc |3.5.1n| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill |6.1.B.2| | 1 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits Exhaust blowing |7.3.D.3| | 1 |
| Brake performance not tested front/rear pads worn to excess |3.7.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced within 12 inch of subframe mount |6.1.1 |c| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill yellow chalked (7.1.1 (a) (i)) | 1 |
| Offside Rear Upper Coil spring fractured or broken coil spring broken (5.3.1 (b) (i)) | 1 |
| Nearside Front position lamp|s| not working side |1.1.A.3b| | 1 |
| Offside Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Emissions not tested due to being excessively high |7.3.A.1| | 1 |
| Offside Front Position lamp not working sidelight |4.2.1 |a|| | 1 |
| Offside Front Power steering pipe|s| or hose|s| excessively corroded small pipe on rack near pinion |2.3.2| | 1 |
| Rear Brake linkage has abnormal movement of levers indicating maladjustment |3.5.1f| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits full bets test carried out. fail (8.2.1.2 (a)) | 1 |
| Offside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Emissions not tested due to major exhaust leak (8.2.1.2 (d)) | 1 |
| Centre Braking system leaking Brake pipe |3.6.A.1| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill bottom of quarter panel |5.2.6| | 1 |
| Centre Braking system leaking pipe split |3.6.A.1| | 1 |
| Rear Brake pipe leaking on a hydraulic braking system front to back (1.1.11 (b) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill at front (7.1.1 (a) (i)) | 1 |
| Offside Front Steering component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg (2.1.2 (e) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill at rear (7.1.1 (a) (i)) | 1 |
| Nearside Front Steering component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg (2.1.2 (e) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill at rear (7.1.1 (a) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis rail (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Floor (6.2.2 (d) (i)) | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded Outer sill |2.4.A.3| | 1 |
| Offside Rear Body component corroded and likely to cause injury Wheel arch (6.2.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Chassis |5.3.6 |a| |ii|| | 1 |
| Central Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sills |7.1.1 |a| |i|| | 1 |
| Front position lamp|s| not working x2 |1.1.A.3b| | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength o/s and n/s chassis by anti-roll bar mountings (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm damaged and seriously weakened (5.3.3 (b) (i)) | 1 |
| Nearside Front Upper Suspension arm damaged and seriously weakened (5.3.3 (b) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chassis rail under floor (7.1.1 (a) (i)) | 1 |
| Offside Rear Position lamp showing white light to the rear lense broken (4.2.3 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases centre and back box |7.1.2| | 1 |
| Nearside Rear Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded mi=iddle floor to sill |5.2.6| | 1 |
| Position lamp not working ALL position bulbs are inoperative (4.2.1 (a) (ii)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg/vehicle structure (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired outer sill - repair tacked in place, not a continuous seam weld (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension arm attachment bracket/mounting insecure suspension upper arm bolt loose (5.3.3 (a) (i)) | 1 |
| Nearside Rear Suspension arm attachment bracket/mounting insecure suspension upper arm bolt loose (5.3.3 (a) (i)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits CAT (8.2.1.2 (b)) | 1 |
| Nearside Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Offside Rear Coil spring fractured or broken broken |5.3.1 |b| |i|| | 1 |
| Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sills both sides (6.1.1 (c) (i)) | 1 |
| Exhaust has a major leak of exhaust gases centre / rear silencer flange |7.1.2| | 1 |
| Emissions not tested car stopped running on the ramp |8.2.1.2 |d|| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg |5.3.6 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg |5.3.6 |a| |ii|| | 1 |
| Central Rear Upper Stop lamp not working |1.2.1b| | 1 |
| Steering system has a road wheel fouling a part of the vehicle |2.2.D.2a| | 1 |
| Steering system excessively tight |2.2.D.1| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases Rear exhaust join excessive corrosion |7.1.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength WITH IN 30CM OF TOP MOUNT (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake valve leaking calipair (1.1.7 (d) (i)) | 1 |
| Offside Rear Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis area |5.3.6 |a| |i|| | 1 |
| Rear Exhaust has a major leak of exhaust gases joint broke off |6.1.2 |a|| | 1 |
| Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill rusted and holed. (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill rusted and holed. (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Under sill to Wheel arch rusted and holed. (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis visible by wheel has rusted and holed. It is also rusted through on the engine side of the chassis. (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis section visible from wheel is rusted and holed. (5.3.6 (a) (i)) | 1 |
| Horn sound not in accordance with requirements Aftermarket horn fitted (7.7 (c)) | 1 |
| Emissions oxygen sensor obviously defective |8.2.1.1 |a|| | 1 |
| Stop lamp(s) not working high level (4.3.1 (a) (ii)) | 1 |
| Fluid leak harmful to the environment or a risk to other road users coolant leak from radidtot |8.4.1 |a| |i|| | 1 |
| Offside Front Anti-roll bar missing |2.4.G.1| | 1 |
| Exhaust carbon monoxide content at idle exceeds default limits 0.35 (8.2.1.2 (b)) | 1 |
| Nearside Rear Braking system leaking Caliper leaking |3.6.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner chassis rail above anti roll bar mounting |2.4.A.3| | 1 |
| Nearside Front Anti-lock braking system component excessively damaged |3.4.2| | 1 |
| Front brake disc modified and seriously weakened |3.5.1n| | 1 |
| Exhaust has a major leak of exhaust gases blowing front and rear (6.1.2 (a)) | 1 |
| Parking brake lever defective so that it cannot be satisfactorily operated (1.1.6 (d)) | 1 |
| Nearside Front Anti-roll bar linkage likely to become detached locking nut loose (5.3.3 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg antiroll bar area (5.3.6 (a) (i)) | 1 |
| Offside Front Steering locking device ineffective track rod end locking nut loose (2.1.3 (d)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg area subframe mounting (5.3.6 (a) (ii)) | 1 |
| Nearside Front Lower Suspension arm ball joint likely to become detached ball joint split pin missing (5.3.4 (a) (ii)) | 1 |
| Nearside Front Steering locking device ineffective track rod end locking nut loose (2.1.3 (d)) | 1 |
| Offside Rear Anti-roll bar linkage has excessive play in a ball joint droplink |2.4.G.2| | 1 |
| Offside Front Steering rack insecure |2.2.B.1a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is fractured sill |2.4.A.3| | 1 |
| Emissions not tested unable to maintain rpm |8.2.1.2 |d|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under side to sill |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting inner wing |5.3.6 |a| |i|| | 1 |
| Offside Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Emissions unable to be completed Engine cut out and would not restart (8.2.1.2 (d)) | 1 |
| Offside Front Electrical wiring damaged and bare wires exposed headlight wiring melted |1.9.2c| | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch marked in yellow |5.3.6 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded marked in yellow |7.1.1 |a| |i|| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded door sill |5.2.6| | 1 |
| Nearside Rear Braking system leaking brake calliper |3.6.A.1| | 1 |
| Emissions unable to be completed due to misfire (8.2.1.2 (d)) | 1 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded main chassis rail |2.4.A.3| | 1 |
| Nearside Rear Lower Radius arm corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Rear Inner Subframe mounting prescribed area is excessively corroded jacking point |2.4.A.3| | 1 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits 1.16 |7.3.D.3| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill at jacking point (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill at jacking point (6.2.2 (d) (i)) | 1 |
| Front Headlamp not working on main beam both |1.7.5a| | 1 |
| Nearside Front Suspension component mounting prescribed area is fractured chassis |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is fractured chassis |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chssis |2.4.A.3| | 1 |
| Steering rack gaiter split both |2.2.D.2d| | 1 |
| Offside coil spring fractured |2.4.C.1a| | 1 |
| Offside Front Subframe mounting prescribed area fractured significantly reducing structural strength on inner chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength inner chassis by anti roll bar mount (5.3.6 (a) (i)) | 1 |
| Hazard warning lamps inoperative |4.4.1 |e|| | 1 |
| Offside Front Position lamp not working bulb 501 |4.2.1 |a|| | 1 |
| Offside Headlamp not working on dipped beam bulb 472 |4.1.1 |a| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension mount |5.3.6 |a| |i|| | 1 |
| Rear Exhaust has a major leak of exhaust gases Exhaust silencer joint to central section (6.1.2 (a)) | 1 |
| Nearside Front Brake pipe connection leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
| Offside Outer Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Rear Shock absorber insecure |2.7.2b| | 1 |
| Subframe mounting prescribed area is excessively corroded both front chassis legs |2.4.A.3| | 1 |
| Subframe mounting prescribed area is inadequately repaired o/s/f chassis leg |2.4.A.3| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced lower sill holed . (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill /floorpan . holed next to seat mounting area . (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded n/s/r outer sill |5.2.6| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor section/ sill area |6.1.1 |c| |i|| | 1 |
| Parking |secondary brake| on a single line braking system has inadequate effort at a wheel both |1.3.1 |a| |i|| | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt bottom ball joint |2.4.G.2| | 1 |
| Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt bottom ball joint |2.4.G.2| | 1 |
| Offside Rear Shock absorbers likely to become detached (5.3.2 (a) (ii)) | 1 |
| Offside Rear Exhaust system insecure |6.1.2 |a|| | 1 |
| Rear coil spring fractured |2.4.C.1a| | 1 |
| Nearside Rear Brake hydraulic reservoir leaking hydraulic fluid |3.6.A.1| | 1 |
| Emissions not tested Cut out during test .Not within limits at time .Hunting and running rough |8.2.1.2 |d|| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded body sill |5.2.6| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded body sill |5.2.6| | 1 |
| Offside Rear Brake pipe connection leaking on a hydraulic braking system at rear pipe connection block (1.1.11 (b) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases rear to centre join (6.1.2 (a)) | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive 0.608 |7.3.D.3| | 1 |
| Offside Front Upper Anti-roll bar linkage ball joint likely to become detached |5.3.4 |a| |ii|| | 1 |
| Offside Front Headlamp excessively deteriorated so that the light output is severely reduced no pattern |1.7.5a| | 1 |
| Rear Exhaust has a major leak of exhaust gases centre and rear joint corroded and blowing |7.1.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced hole in sill beneath seat base and within prescribed area of seatbelt mounting (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced hole in sill beneath seat base and within prescribed area of seatbelt mounting (7.1.1 (a) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Underside box section (6.1.1 (c) (i)) | 1 |
| Offside Front Torsion bar attachment bracket fractured |2.4.E.4b| | 1 |
| Offside Rear Lower Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Emissions not tested engine leaking coolant (8.2.1.2 (d)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer body sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Road wheel fractured (5.2.2 (a)) | 1 |
| Emissions not tested low flow + co too high |7.3.A.1| | 1 |
| Headlamp not working on main beam both (4.1.1 (a) (ii)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced corner sill floor (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced corner sill floor (6.1.1 (c) (i)) | 1 |
| Nearside Front Brake linkage has restricted free movement (1.1.15 (e)) | 1 |
| Fluid leak harmful to the environment or a risk to other road users p/steering pipe? (8.4.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chasis |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chasis |2.4.A.3| | 1 |
| Offside Electrical wiring deteriorated, likely to cause a short headlamp wiring burnt |1.9.2b| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis holed at anti roll bar mount |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis holed at anti roll bar mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed |7.1.1 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill holed |7.1.1 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced holed at front of inner wheel arch |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill holed |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced holed at front of inner wheel arch |7.1.1 |a| |i|| | 1 |
| Offside Seat belt buckle not functioning as intended |7.1.2 |d|| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer`s specified limits see report |8.2.1.2 |a|| | 1 |
| Offside Rear Parking |secondary brake| on a single line braking system has inadequate effort at a wheel |1.3.1 |a| |i|| | 1 |
| Offside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill panel |7.1.1 |a| |i|| | 1 |
| Emissions unable to be completed Engine cut out (8.2.1.2 (d)) | 1 |
| Windscreen in an unacceptable condition crack in windsreen (3.2 (c) (i)) | 1 |
| Rear Brake disc significantly and obviously worn heavily corroded (1.1.14 (a) (i)) | 1 |
| Offside Front Suspension arm insecurely attached (5.3.3 (a) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Wing (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch/leg (6.1.1 (c) (i)) | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Nearside Front Position lamp not working SIDELIGHT (4.2.1 (a) (ii)) | 1 |
| Nearside Front Upper Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Front Lower Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Offside Rear Upper Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Offside Rear Lower Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Nearside Rear Lower Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Nearside Rear Upper Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Nearside Front Upper Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Offside Front Upper Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Offside Front Lower Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak join from center section to back box (8.2.1.1 (b)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak rear flange (8.2.1.1 (b)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outta seal (6.1.1 (c) (i)) | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced central sill (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension arm attachment bracket/mounting damaged and seriously weakened chassis |5.3.3 |b| |i|| | 1 |
| Emissions not tested bad running |8.2.1.2 |d|| | 1 |
| Offside Rear Brake hose connection leaking on an air braking system (1.1.12 (c) (i)) | 1 |
| Headlamp aim beam image obviously incorrect both front |1.8.A.1b| | 1 |
| Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Rear Exhaust has a major leak of exhaust gases exhaust broken at rear silencer |7.1.2| | 1 |
| Nearside Front Lower Front suspension has excessive movement at a suspension ball joint |2.5.A.1c| | 1 |
| Offside Rear Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 1 |
| Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Front Seat belt insecurely fixed to the seat Stalk bolt loose |5.2.1a| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength FLOOR/CHASSIS (5.3.6 (a) (i)) | 1 |
| Centre Rear fog lamp adversely affected by the operation of another lamp |1.3.2f| | 1 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 1 |
| Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) | 1 |
| Power steering malfunctioning (2.1.5 (a)) | 1 |
| Nearside Rear Shock absorbers has negligible damping effect (5.3.2 (d)) | 1 |
| Offside Rear Shock absorbers has negligible damping effect (5.3.2 (d)) | 1 |
| Brakes imbalanced across an axle | 1 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
| Offside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Rear Rear fog lamp does not emit a steady red light |4.5.4 |a|| | 1 |
| Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Rear fog lamp does not emit a steady red light |4.5.4 |a|| | 1 |
| Nearside Front Road wheel fractured |5.2.2 |a|| | 1 |
| Front Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
| Nearside Front Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Rear Upper Suspension arm rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Horn not working |1.6.2a| | 1 |
| Nearside Rear Braking system leaking |3.6.A.1| | 1 |
| Offside Rear fog lamp emits a light other than red |1.3.2e| | 1 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
| Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Steering retaining device missing track rod end nut |2.2.C.1g| | 1 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Road wheel bead rim badly distorted |4.2.A.1a| | 1 |
| Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c) | 1 |
| Rear fog lamp not working (1.3.2b) | 1 |
| Rear fog lamp insecure (1.3.2a) | 1 |
| Rear fog lamp tell tale not working (1.3.1b) | 1 |
| Offside Front position lamp(s) not working (1.1.A.3b) | 1 |
| Offside Rear brake caliper leaking (3.6.A.1) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Steering locking device missing track rod end (2.1.3 (d)) | 1 |
| Offside Steering locking device missing track rod end (2.1.3 (d)) | 1 |
| Nearside Front Lower Steering locking device missing ball joint (2.1.3 (d)) | 1 |
| Offside Front Lower Steering locking device missing ball joint (2.1.3 (d)) | 1 |
| Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Nearside Front Upper Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Rear Suspension arm pin or bush excessively worn lower arm lower bushes (5.3.4 (a) (i)) | 1 |
| Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 1 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
| Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) | 1 |
| Offside Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) | 1 |
| Brake master cylinder leaking from seal to servo (1.1.10 (b) (ii)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill and wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill and wheel arch (7.1.1 (a) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill + wheel arch + outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Front Position lamp not working side (4.2.1 (a) (ii)) | 1 |
| Offside Front Position lamp not working side (4.2.1 (a) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases BOX (6.1.2 (a)) | 1 |
| Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
| Offside Rear Coil spring fractured or broken (5.3.1 (b) (i)) | 1 |
| Brake pipe at imminent risk of failure or fracture all 4 (1.1.11 (a)) | 1 |
| Nearside Front Upper Suspension arm ball joint dust cover missing (5.3.4 (b) (ii)) | 1 |
| Offside Front Upper Suspension arm ball joint dust cover missing (5.3.4 (b) (ii)) | 1 |
| Nearside Front Outer Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Front Outer Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Rear Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides (5.3.6 (a) (i)) | 1 |
| Front Horn not working (7.7 (a)) | 1 |
| Windscreen wiper blade missing (3.4 (b) (ii)) | 1 |
| Front Lower Bumper insecure (6.1.4 (a) (i)) | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
| Central Rear Upper Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill area (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill area (6.2.2 (d) (i)) | 1 |
| Nearside Rear Road wheel bead rim badly distorted (4.2.A.1a) | 1 |
| Rear fog lamp switch not operating in accordance with the requirements (4.5.3 (a)) | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg by rear mount area (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Shock absorbers has a serious fluid leak | 1 |
| Nearside Headlamp are incorrectly positioned (4.1.4 (a)) | 1 |
| Offside Headlamp are incorrectly positioned (4.1.4 (a)) | 1 |
| Nearside Headlamp insecure (4.1.1 (c)) | 1 |
| Offside Headlamp insecure (4.1.1 (c)) | 1 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Hazard warning lamps inoperative (4.4.1 (e)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Offside Front Obligatory mirror insecure (3.3 (b) (ii)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 1 |
| Nearside Rear Brake performance unable to be tested brake fluid leaking (1.2.1 (g)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Exhaust emissions - engine idle speed too high (8.2.1.2 (e)) | 1 |
| Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b)) | 1 |
| Rear Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
| Central Rear Oil leaking excessively from transmission (8.4.1 (a) (i)) | 1 |
| Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Offside Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i)) | 1 |
| Offside Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
| Emissions unable to be completed due to coolant leak and overheating (8.2.1.2 (d)) | 1 |
| Nearside Direction indicator not working indicator in side wing not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
| Offside Front Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
| Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
| Central Exhaust has a major leak of exhaust gases and Back Box (6.1.2 (a)) | 1 |
| Emissions unable to be completed (8.2.1.2 (d)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner & outer sill area (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced inner & outer sill area (6.1.1 (d) (i)) | 1 |
| Exhaust emits clearly visible black smoke during acceleration (8.2.1.2 (g)) | 1 |
| Nearside Front Headlamp insecure (4.1.1 (c)) | 1 |
| Offside Front Headlamp insecure (4.1.1 (c)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Side repeater not working (4.4.1 (a) (ii)) | 1 |
| Central Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt upper arm ball joint dust cover split (5.3.4 (b) (ii)) | 1 |
| Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt upper arm ball joint dust cover split (5.3.4 (b) (ii)) | 1 |
| Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt steering rack gaiter split (2.1.3 (g) (ii)) | 1 |
| Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt steering rack gaiter split (2.1.3 (g) (ii)) | 1 |
| Nearside Side repeater incorrect colour (4.4.3 (a)) | 1 |
| Upper Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill section (5.3.6 (a) (i)) | 1 |
| Nearside Side repeater likely to become detached (4.4.1 (c) (ii)) | 1 |
| Offside Side repeater likely to become detached (4.4.1 (c) (ii)) | 1 |
| Nearside Rear Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Offside Rear Parking brake inoperative on one side low effort (1.4.1 (a)) | 1 |
| Offside Front Anti-roll bar insecurely attached (5.3.3 (a) (i)) | 1 |
| Offside Rear Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
| Rear fog lamp switch missing (4.5.3 (a) (ii)) | 1 |
| Brake pedal anti-slip provision worn smooth (1.1.2 (c)) | 1 |
| Offside Brake cable has restricted free movement (3.5.1k) | 1 |
| Nearside Rear rear brake recording little or no effort (3.7.B.5a) | 1 |
| Offside Front Direction indicator not working (1.4.A.2c) | 1 |
| Offside Rear brake disc excessively pitted (3.5.1h) | 1 |
| Nearside Front Headlamp not working on dipped beam LIFT MOTOR INOPERATIVE (4.1.1 (a) (ii)) | 1 |
| Emission control equipment obviously defective SEE SEPERATE PRINTOUT (8.2.2.1 (a)) | 1 |
| Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 1 |
| Rear Brake pipe leaking on a hydraulic braking system from offside to nearside (1.1.11 (b) (ii)) | 1 |
| Nearside Rear Coil spring modified so the suspension is inoperative (5.3.1 (d) (ii)) | 1 |
| Offside Front Coil spring corroded so that its cross sectional area is reduced and seriously weakened (5.3.1 (b) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch/wing has a corrosion hole |7.1.1 |a| |i|| | 1 |
| Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Corroded outer sill and body and will need attention can cause injury (6.2.2 (d) (i)) | 1 |
| Headlamp aim projected beam image is obviously incorrect lenses misted (4.1.2 (c)) | 1 |
| Nearside Front Position lamp not working bad connection (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill area |5.3.6 |a| |i|| | 1 |
| Central Parking brake lever has excessive movement indicating incorrect adjustment |1.1.6 |c|| | 1 |
| Rear Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits air filter modified (8.2.1.2 (b)) | 1 |
| Power steering component leaking steering rack |2.1.5 |a|| | 1 |
| Exhaust has a major leak of exhaust gases centre join |7.1.2| | 1 |
| Headlamp not working on dipped beam N/S/F Dipped & Main Beam Inoperative (4.1.1 (a) (ii)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits CO2 Emissions Too High (Double Limit) (8.2.1.2 (b)) | 1 |
| Headlamp not working on dipped beam N/S/F Dipped & Main Beam Inoperative |4.1.1 |a| |ii|| | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits 1.159 (limit 0.970-1.030) (8.2.1.2 (c)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill at rear (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 1 |
| Offside Front Braking system leaking brake caliper |3.6.A.1| | 1 |
| Rear An item not tested |Manual| | 1 |
| Offside Front Brake pipe at imminent risk of failure or fracture To hose (1.1.11 (a)) | 1 |
| Fluid leak harmful to the environment or a risk to other road users power steering (8.4.1 (a) (i)) | 1 |
| Front Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Nearside Rear Inner Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under wing /sill end area (7.1.1 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases joint to rear silencer |7.1.2| | 1 |
| Electrical wiring likely to drag on the ground (4.11 (a) (iii)) | 1 |
| Stop lamp(s) not working n/s and o/s (4.3.1 (a) (ii)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer`s specified limits And fast idle |8.2.1.2 |a|| | 1 |
| Nearside Front passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 1 |
| Offside Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Outer Direction indicator not working Side repeater (4.4.1 (a) (ii)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength hole in chassis near shock absorber (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength hole in sill (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded |7.1.1 |a| |i|| | 1 |
| Nearside Front Brake modification unsafe (1.1.21 (d) (i)) | 1 |
| Offside Front Brake modification unsafe (1.1.21 (d) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases tailpipe missing |7.1.2| | 1 |
| Central Rear Upper Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced under sill corroded and holed (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor section (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill at |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis at |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer sill and floor (7.1.1 (a) (i)) | 1 |
| Fuel tank leaking (6.1.3 (b) (i)) | 1 |
| Nearside Front Headlamp not in a clean condition affecting beam image |1.2.4a| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg |6.1.1 |c| |i|| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OUTER SILL HOLED |6.1.B.2| | 1 |
| Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Nearside Rear Anti-roll bar linkage insecurely attached |5.3.3 |a| |i|| | 1 |
| Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded within 30cm of seat belt mounting (7.1.1 (a) (i)) | 1 |
| Nearside Front Lower Body panel insecure wing lower (6.2.1 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill area holed (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Body panel insecure (6.2.1 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt upper (5.3.4 (b) (ii)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength middle inner sill corroded (5.3.6 (a) (i)) | 1 |
| Emissions not tested over heating very hot (8.2.1.2 (d)) | 1 |
| Front Brake hose excessively stretched both |1.1.12 |b| |ii|| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 1 |
| Brake pipe leaking front to rear brake pipe at rear |3.6.A.1| | 1 |
| Offside Rear Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure is deformed and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Nearside rear brakes release unevenly |3.7.B.4| | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting holed |6.2.2 |d| |i|| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting holed |6.2.2 |d| |i|| | 1 |
| Power steering inoperative steering stiff |2.3.3a| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) | 1 |
| Front Service brake indicates brake bind |3.7.D.2a| | 1 |
| Nearside Rear Anti-roll bar linkage damaged and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt drop link rod. |5.3.4 |b| |ii|| | 1 |
| Nearside Rear Lower Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt drop link rod |5.3.4 |b| |ii|| | 1 |
| front brake binding Both binding |3.7.B.1| | 1 |
| Rear Service brake imbalanced across an axle (1.2.1 (b) (i)) | 1 |
| Front Service brake application uneven across the axle |3.7.D.2b| | 1 |
| Nearside Front Anti-roll bar linkage rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Chassis leg (6.2.2 (d) (ii)) | 1 |
| Offside Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Chassis leg (6.2.2 (d) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases Flanges where de cat pipe fitted (6.1.2 (a)) | 1 |
| Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
| Nearside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced in front of rear wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill and wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill and wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Rear Body mounting fixings insecure such that stability is seriously impaired corroded (6.2.2 (c) (ii)) | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner and outer |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner |5.2.6| | 1 |
| Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting UNDER WHEEL ARCH AT ROLL BAR MOUNT AREA (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis Leg |6.2.2 |d| |i|| | 1 |
| Central Exhaust has a major leak of exhaust gases U clamp fixing (6.1.2 (a)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits 1.07 (8.2.1.2 (c)) | 1 |
| Offside Front Upper Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition back box missing |7.1.4| | 1 |
| Parking brake operation is causing the vehicle to swerve to the nearside right hand caliper not working on handbrake |3.7.C.3a| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor where seat it |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor where seat is |6.1.B.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded INNER WING... |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded FLOOR PAN TO SILL. MARKED WITH YELLOW CHALK... |5.2.6| | 1 |
| Nearside Front Power steering pipe|s| or hose|s| excessively corroded under reservoir |2.3.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill corroded and holed |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded at roll bar mounting |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded at roll bar mounting |2.4.A.3| | 1 |
| Offside Rear Rear fog lamp does not emit a steady red light white light and not red (4.5.4 (a)) | 1 |
| Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt split (5.3.4 (b) (ii)) | 1 |
| Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt split (2.1.3 (g) (ii)) | 1 |
| Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt split (2.1.3 (g) (ii)) | 1 |
| Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt wishbone ball joint gaiter burst (5.3.4 (b) (ii)) | 1 |
| Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt wishbone ball joint gaiter burst (5.3.4 (b) (ii)) | 1 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt wishbone ball joint gaiter burst (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded centre floor within 30 cms of |5.2.6| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced within 30cm of drivers seat mounting. (6.1.1 (c) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Nearside rear outer sill (7.1.1 (a) (i)) | 1 |
| Headlamp aim projected beam image is obviously incorrect Nearside (4.1.2 (c)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of front wheel arch area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of front wheel arch area (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 1 |
| Nearside Rear Lower Suspension arm insecurely attached (5.3.3 (a) (i)) | 1 |
| Position lamp switch does not illuminate the front and rear position lamps with a single operation (4.2.2 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill end (5.3.6 (a) (i)) | 1 |
| Rear fog lamp switch insecure |1.3.1a| | 1 |
| Centre Rear fog lamp insecure |1.3.2a| | 1 |
| Offside Front Power steering ram|s| leaking from a failed seal |2.3.3b| | 1 |
| Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch/sill (5.3.6 (a) (i)) | 1 |
| Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill/floor (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill/floor (6.1.1 (c) (i)) | 1 |
| Offside Rear fog lamp insecure |1.3.2a| | 1 |
| Offside Front Macpherson strut inappropriately repaired |2.4.A.2| | 1 |
| Offside Upper Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Rear fog lamp does not emit a steady red light lens faded and bulb white (4.5.4 (a)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner-sill (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner-sill/floor (6.1.1 (c) (i)) | 1 |
| Windscreen wiper not working both sides |3.4 |a|| | 1 |
| Rear fog lamp missing |4.5.1 |a| |ii|| | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect LED lamp units fitted (4.1.2 (c)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect LED lamp units fitted (4.1.2 (c)) | 1 |
| Offside Rear Electrical wiring insulation in such a condition there is an imminent risk of fire or formation of sparks fog lamp wiring hanging and close to rear exhaust section (4.11 (c) (iii)) | 1 |
| Nearside Front Body insecure (6.2.2 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting CHASSIS LEG (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting CHASSIS LEG (6.2.2 (d) (i)) | 1 |
| Rear Brake lever has restricted free movement |3.5.1k| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired |5.3.6 |a| |i|| | 1 |
| Offside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill x2 (6.1.1 (c) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill x3 (6.1.1 (c) (i)) | 1 |
| Central Exhaust catalytic converter missing where one was fitted as standard (8.2.2.1 (a)) | 1 |
| Nearside Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Steering column top mounting bracket insecure |2.1.2d| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis floor (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/inner wheel arch area (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced chassis floor/inner wheel arch area (7.1.1 (a) (i)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits date of first use is 07 September 2000 so tested on emission as 2000 (8.2.1.2 (c)) | 1 |
| Headlamp incorrect colour both |1.7.5b| | 1 |
| Indicator switch faulty |1.4.A.1| | 1 |
| Position lamp switch faulty |1.1.A.1| | 1 |
| Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Rear Rear fog lamp insecure |1.3.2a| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 1 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor rail (6.1.1 (c) (i)) | 1 |
| Rear Exhaust emissions likely to be affected by an exhaust leak exhaust damaged , leaking gases (8.2.2.1 (b)) | 1 |
| Central Exhaust emissions likely to be affected by an exhaust leak exhaust joint leaking gases (8.2.2.1 (b)) | 1 |
| Exhaust has a major leak of exhaust gases Rear join |6.1.2 |a|| | 1 |
| Offside Rear Brake hose damaged and likely to fail twisted (1.1.12 (a)) | 1 |
| Offside Front Rear fog lamp tell-tale missing (4.9.1 (a) (ii)) | 1 |
| Nearside Front Upper Suspension component insecurely attached ball joint split pin missing from castle nut (5.3.3 (a) (i)) | 1 |
| Central Exhaust has a major leak of exhaust gases catalyst (6.1.2 (a)) | 1 |
| Offside Rear Exhaust Lambda reading after 2nd fast idle outside specified limits exhaust (8.2.1.2 (c)) | 1 |
| Nearside Rear Exhaust carbon monoxide content after 2nd fast idle exceeds default limits exhaust (8.2.1.2 (b)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits 1.165 (8.2.1.2 (c)) | 1 |
| Exhaust carbon monoxide content at idle exceeds default limits 0.46% (8.2.1.2 (b)) | 1 |
| Horn sound not in accordance with requirements horn has klaxon type fitted (7.7 (c)) | 1 |
| Offside Front Lower Suspension arm ball joint excessively worn outer (5.3.4 (a) (i)) | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect got a left hand driver pattern (4.1.2 (c)) | 1 |
| Central Rear Electrical wiring insulation in such a condition there is an imminent risk of fire or formation of sparks boot (4.11 (c) (iii)) | 1 |
| Offside Rear Battery insecure and likely to cause a short circuit in boot (4.13 (a) (ii)) | 1 |
| Central Front Undertray insecure (8.1.1 (b) (i)) | 1 |
| Nearside Rear Hydraulic brake calliper insecurely mounted (1.1.16 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Emissions not tested exhaust blow central (8.2.1.2 (d)) | 1 |
| Front Exhaust fumes causing a danger to health of persons on board (6.1.2 (b) (ii)) | 1 |
| Rear Service brake lagging in operation (1.2.1 (d)) | 1 |
| Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel both (1.3.1 (a) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill marked yellow (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch marked yellow (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced drivers floor marked yellow (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer cill marked yellow (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer cill marked yellow (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension arm ball joint excessively worn lower swivel (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected At Anti Roll Bar D-Bush Mounting Plate (5.3.6 (a) (ii)) | 1 |
| Nearside Direction indicator not working intermittent fault (4.4.1 (a) (ii)) | 1 |
| Main beam tell-tale not working correctly always on (4.9.1 (a) (ii)) | 1 |
| Main beam tell-tale not working always on (4.9.1 (a) (ii)) | 1 |
| Front Headlamp not working on dipped beam o/s & n/s (4.1.1 (a) (ii)) | 1 |
| Front Headlamp not working on main beam both o/s & n/s (4.1.1 (a) (ii)) | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength flooring (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension arm fractured (5.3.3 (b) (ii)) | 1 |
| Offside Front Vehicle structure inadequately repaired such that structural rigidity is significantly reduced chassis (6.1.1 (d) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/inner arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/inner arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor and out rigger (6.1.1 (c) (i)) | 1 |
| Nearside Front Headlamp has more than 1/2 LEDs not functioning (4.1.1 (a) (ii)) | 1 |
| Offside Front Headlamp has more than 1/2 LEDs not functioning (4.1.1 (a) (ii)) | 1 |
| Nearside Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Offside Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg area under bonnet (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill |5.2.6| | 1 |
| Central Brake pipe leaking on a hydraulic braking system front-rear (1.1.11 (b) (ii)) | 1 |
| Exhaust emits dense blue smoke at idle (8.2.1.2 (f)) | 1 |
| Nearside Front Upper Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Main beam tell-tale not working on all the time (4.9.1 (a) (ii)) | 1 |
| Headlamp not working on dipped beam both headlights (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on main beam both headlights (4.1.1 (a) (ii)) | 1 |
| Nearside Integral body structure is deformed and structural rigidity is significantly reduced chassis rail (6.1.1 (a) (i)) | 1 |
| Offside Integral body structure is deformed and structural rigidity is significantly reduced chassis rail (6.1.1 (a) (i)) | 1 |
| Nearside Integral body structure is fractured and structural rigidity is significantly reduced chassis rail (6.1.1 (a) (i)) | 1 |
| Offside Integral body structure is fractured and structural rigidity is significantly reduced chassis rail (6.1.1 (a) (i)) | 1 |
| Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting o/s rear inner wheel arch corroded (6.2.2 (d) (i)) | 1 |
| Offside Rear Parking brake lever is impeded in its travel |3.1.6c| | 1 |
| Offside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Nearside Rear Side repeater incorrect colour (4.4.3 (a)) | 1 |
| Offside Rear Side repeater incorrect colour (4.4.3 (a)) | 1 |
| Offside Rear Brake pipe connection leaking on a hydraulic braking system failed (1.1.11 (b) (ii)) | 1 |
| Nearside Rear Service brake effort inadequate at a wheel no effort (1.2.1 (a) (i)) | 1 |
| Offside Rear Service brake effort inadequate at a wheel no effort (1.2.1 (a) (i)) | 1 |
| Shock absorbers has negligible damping effect all four (5.3.2 (d)) | 1 |
| Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction sunstrip (3.1 (a) (ii)) | 1 |
| Nearside Front Anti-roll bar linkage pin or bush likely to become detached (5.3.4 (a) (ii)) | 1 |
| Front Anti-roll bar likely to become detached (5.3.3 (a) (ii)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch corroded (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box section corroded (5.3.6 (a) (i)) | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor joint (7.1.1 (a) (i)) | 1 |
| Emissions unable to be completed vehicle overheating on fast idle (8.2.1.2 (d)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 1 |
| Rear Brake performance unable to be tested pads below limit risk of further damage (1.2.1 (g)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner cill (6.1.1 (c) (i)) | 1 |
| Offside Stop lamp adversely affected by the operation of another lamp with side lights on lamp not working |1.2.1f| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sill areas marked in yellow |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner arch areas marked in yellow |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner sill area`s |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis leg area`s |2.4.A.3| | 1 |
| Nearside Rear Anti-roll bar pin or bush excessively worn anti roll bar bush (5.3.4 (a) (i)) | 1 |
| Offside Rear Anti-roll bar pin or bush excessively worn anti roll bar d bush (5.3.4 (a) (i)) | 1 |
| Exhaust emissions carbon monoxide content excessive co 9,37 (8.2.1.2 (b)) | 1 |
| Offside Rear Outer Body component insecure sill littel hole (6.2.1 (a) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases pipe/centre joint (6.1.2 (a)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill panel (7.1.1 (a) (i)) | 1 |
| Emissions unable to be completed no gasses detected from tail pipe (8.2.1.2 (d)) | 1 |
| Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail floorpan (6.2.2 (d) (i)) | 1 |
| Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Emissions unable to be completed machine fault (8.2.1.2 (d)) | 1 |
| Nearside Front Upper Suspension arm ball joint likely to become detached no locking device top nut split pin missing (5.3.4 (a) (ii)) | 1 |
| Offside Front Upper Suspension arm ball joint likely to become detached top ball joint split pin missing on nut (5.3.4 (a) (ii)) | 1 |
| Offside Front Direction indicator light intensity significantly reduced (4.4.3 (a)) | 1 |
| Offside Front Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect after market light (4.1.2 (c)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect after market light (4.1.2 (c)) | 1 |
| Headlamp aim unable to be tested both (4.1.2 (b)) | 1 |
| Nearside Obligatory mirror insecure (3.3 (b) (ii)) | 1 |
| Obligatory mirror does not provide a view to the rear both mirrors to small (3.3 (c)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front floor (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Anti-roll bar ball joint excessively worn other side different length (5.3.4 (a) (i)) | 1 |
| Headlamp aim unable to be tested no pattern due to after market lights (4.1.2 (b)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chassis (7.1.1 (a) (i)) | 1 |
| Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt Outer clip detached (2.1.3 (g) (ii)) | 1 |
| Nearside Front Lower Suspension arm ball joint excessively worn Play can be felt when steering is work side to side (5.3.4 (a) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill corroded (Close to seat / seatbelt mounting (6.1.1 (c) (i)) | 1 |
| Emissions not tested Equipment could not determine oil temp or RPM (8.2.1.2 (d)) | 1 |
| Front Dipswitch operation does not deflect all main beam headlamps to make them dipped beams (4.1.3 (b)) | 1 |
| Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn Front (5.3.4 (a) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i)) | 1 |
| Vehicle Identification Number has more than one different number displayed (0.2 (c)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced N/S AND O/S (6.1.1 (c) (i)) | 1 |
| Emissions oxygen sensor obviously defective Wiring broken (8.2.1.1 (a)) | 1 |
| Emissions unable to be completed Exhaust downpipe collector cracked and blowing. (8.2.1.2 (d)) | 1 |
| Exhaust catalytic converter missing where one was fitted as standard Rear joint of replacement section blowing. (8.2.1.1 (a)) | 1 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill holed. (7.1.1 (a) (i)) | 1 |
| Headlamp aim unable to be tested led lights fitted and no pattern (4.1.2 (b)) | 1 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength all sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg holed (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill. (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill. (6.1.1 (c) (i)) | 1 |
| Nearside brake disc excessively pitted |3.5.1h| | 1 |
| Nearside Front Hydraulic brake calliper inadequately mounted and braking performance affected bolt missing (1.1.16 (c) (ii)) | 1 |
| Offside Seat belt not functioning as intended wont fasten (7.1.2 (c)) | 1 |
| Nearside Steering rack has excessive free play detected at the steering wheel (steering rack fitted) (2.3 (a) (i)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced flooring (7.1.1 (a) (i)) | 1 |
| Nearside Rear Upper Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 1 |
| Nearside Front Lower Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting whole nearside sill unsuitable repair carried out (6.2.2 (d) (i)) | 1 |
| Offside Rear Upper Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 1 |
| Offside Front Lower Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting whole offside sill unsuitable repair (6.2.2 (d) (i)) | 1 |
| Nearside Front Body panel insecure wing (6.2.1 (a) (i)) | 1 |
| Offside Front Body panel insecure wing (6.2.1 (a) (i)) | 1 |
| Offside Rear Rear fog lamp light intensity significantly reduced (4.5.4 (a)) | 1 |
| Front Emissions NOx sensor obviously defective (8.2.1.1 (a)) | 1 |
| Offside Direction indicators not working |1.4.A.2c| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced WheelArch (6.1.1 (c) (i)) | 1 |
| Central Rear Stop lamp(s) not working CENTRE STOP LIGHT (4.3.1 (a) (ii)) | 1 |
| Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt SPLIT (2.1.3 (g) (ii)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt SPLIT (5.3.4 (b) (ii)) | 1 |
| Emissions not tested oil below minimum (8.2.1.2 (d)) | 1 |
| Nearside Steering arm deformed bent (2.1.3 (c) (i)) | 1 |
| Offside All position lamps adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Rear Position lamp adversely affected by the operation of another lamp o/s n/s (4.2.3 (c)) | 1 |
| Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt SPLIT (5.3.4 (b) (ii)) | 1 |
| Stop lamp(s) light intensity significantly reduced Tail light & Stop lights are wired around the wrong way (4.3.3 (a) (ii)) | 1 |
| Offside Rear fog lamp emits a light other than red (1.3.2e) | 1 |
| All position lamps not working (1.1.A.3b) | 1 |
| Rear fog lamp not working (1.3.2b) | 1 |
| Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
| Nearside Rear Brake hose leaking on a hydraulic braking system brake hose (1.1.12 (c) (ii)) | 1 |
| Emissions not tested cat missing (8.2.1.2 (d)) | 1 |
| Offside Brake linkage has restricted free movement |3.5.1k| | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch to sill hole (6.2.2 (d) (i)) | 1 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt split (2.1.3 (g) (ii)) | 1 |
| Offside Rear position lamp|s| flickers when tapped lightly by hand |1.1.4c| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 1 |
| Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch (6.2.2 (d) (i)) | 1 |
| Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch (6.2.2 (d) (i)) | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Central Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Central Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases box holed (6.1.2 (a)) | 1 |
| Offside Front Lower Suspension arm corroded and seriously weakened at the shocker mount (5.3.3 (b) (i)) | 1 |
| Rear Exhaust system insecure exhaust rubber mount (6.1.2 (a)) | 1 |
| Offside Headlamp light intensity severely reduced bad earth (4.1.4 (a)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill at rear (7.1.1 (a) (i)) | 1 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage loose (7.1.1 (b)) | 1 |
| Offside Front Seat belt installation anchorage insecure (10.1 (d)) | 1 |
| Emissions unable to be completed Due to CO being very High (8.2.1.2 (d)) | 1 |
| Parking brake inoperative on one side Both Sides No Performance (1.4.1 (a)) | 1 |
| Electrical wiring insecure and connectors likely to become disconnected battery terminal (4.11 (a) (ii)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced offside outer sill (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced offside sill underside (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chassis leg (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chassis leg (7.1.1 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired chassis rail under floor (6.2.2 (d) (ii)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired wheel arch chassis leg (6.2.2 (d) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under floor (5.3.6 (a) (i)) | 1 |
| Nearside Rear Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (inner sill) (6.2.2 (d) (i)) | 1 |
| Nearside Track rod end ball joint has excessive play securing nut insecure |2.1.3 |b| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded SILL/SILL BACKING |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded SILL/SILL BACKING |5.2.6| | 1 |
| Centre Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
| Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt Both sides (2.1.3 (g) (ii)) | 1 |
| Rear Anti-roll bar pin or bush excessively worn Both sides (5.3.4 (a) (i)) | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mount area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis inner wing area front wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired Not fully seam wielded (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg in front of upper wishbone |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area is excessively corroded Both sides outer sills
|2.4.A.3| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction lower decal (3.1 (a) (ii)) | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect LED fitted (4.1.2 (c)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect LED Fitted (4.1.2 (c)) | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill in 2 places |5.2.6| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced arch (7.1.1 (a) (i)) | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength main chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Integral body structure inadequately repaired such that structural rigidity is significantly reduced sill panel (6.1.1 (d) (i)) | 1 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill panel (6.1.1 (c) (i)) | 1 |
| Nearside Front Lower Suspension arm ball joint likely to become detached Bolt lose (5.3.4 (a) (ii)) | 1 |
| Nearside Rear Integral body structure has excessive corrosion which adversely affects braking or steering inner sill/arch (6.1.1 (c) (ii)) | 1 |
| Offside Rear Integral body structure has excessive corrosion which adversely affects braking or steering inner sill/arch (6.1.1 (c) (ii)) | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment excessive travel (1.1.6 (c)) | 1 |
| Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill insecure (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill. (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill too floor (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill too floor (7.1.1 (a) (i)) | 1 |
| Nearside Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Nearside Front Vehicle structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 1 |
| Nearside Rear Inner Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced wheel arch (6.1.1 (b) (ii)) | 1 |
| Nearside Rear Parking brake inoperative on one side low (1.4.1 (a)) | 1 |
| Rear Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor edge holed (6.1.1 (c) (i)) | 1 |
| Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting OSF OUTER WING/SILL (6.2.2 (d) (i)) | 1 |
| Offside Rear Brake pipe excessively damaged (1.1.11 (c)) | 1 |
| Offside Suspension arm ball joint dust cover no longer prevents the ingress of dirt TOP AND BOTTOM (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Nearside Headlamp not working on main beam Full beam not working and headlamp goes out with main beam (4.1.1 (a) (ii)) | 1 |
| Offside Rear Shock absorbers insecurely attached (5.3.2 (a) (i)) | 1 |
| Offside Rear Electrical wiring heavily deteriorated EARTH STRAP TO DIFF (4.11 (b) (ii)) | 1 |
| Stop lamp(s) light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
| Rear Position lamp has a product on the lens or light source which significantly reduces light intensity (4.2.3 (b) (ii)) | 1 |
| Front Direction indicator light intensity significantly reduced and rear (4.4.3 (a)) | 1 |
| Headlamp light intensity severely reduced x2 (4.1.4 (a)) | 1 |
| Oil leaking excessively from engine falling on hot exhaust (8.4.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg at anti roll bar mounting |2.4.A.3| | 1 |
| Nearside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed (6.2.2 (d) (i)) | 1 |
| Emissions not tested test aborted excessive carbon monoxide (8.2.1.2 (d)) | 1 |
| Nearside Front Macpherson strut insecurely attached (5.3.3 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced innersill (7.1.1 (a) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced centre chassis (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced center chassis (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis next to anti roll bar mount (5.3.6 (a) (i)) | 1 |
| Inner Brake disc significantly and obviously worn OSF,NSF (1.1.14 (a) (i)) | 1 |
| Nearside Rear Road wheel fixings not compatible (5.2.2 (d)) | 1 |
| Offside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Rear fog lamp not working no rear fog light visible (4.5.1 (a) (ii)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded nsr sill corroded |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength osf sill and wing |5.3.6 |a| |i|| | 1 |
| Offside Front Lower Side repeater not working (bumper corner) (4.4.1 (a) (ii)) | 1 |
| Front Undertray insecure (8.1.1 (b) (i)) | 1 |
| Nearside Front Headlamp not working on dipped beam no iamage (4.1.1 (a) (ii)) | 1 |
| Rear Service brake excessively fluctuating os,ns (1.2.1 (e)) | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill areas (7.1.1 (a) (i)) | 1 |
| Nearside Front Coil spring with an unsafe modification not seated correctly upper (5.3.1 (d) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Main chassis corroded (by anti roll bar) (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Outer sill corrosion (6.2.2 (d) (ii)) | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel Arch/Chassis Leg (5.3.6 (a) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Hole in floor to inner sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill corroded and holed (6.1.1 (c) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced middle floor (7.1.1 (a) (i)) | 1 |
| Nearside Front Headlamp aim unable to be tested dip beam not working (4.1.2 (b)) | 1 |
| Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid calliper (1.1.16 (b) (i)) | 1 |
| Offside Front Shock absorbers has negligible damping effect (5.3.2 (d)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced OUTER SILL CORROSION. (6.1.1 (c) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inside arch (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced floor (6.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch corroded (7.1.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER ARCH (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner / outer sill (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner /outer sill (5.3.6 (a) (ii)) | 1 |
| Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt both (5.3.4 (b) (ii)) | 1 |
| Front Steering rack gaiter split |2.2.D.2d| | 1 |
| Front Brake pipe fouled by moving parts |3.6.B.2a| | 1 |
| Offside Ball joint has excessive play |2.2.B.1f| | 1 |
| Central Stop lamp(s) light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
| Offside Headlamp reflector seriously defective (4.1.1 (b) (ii)) | 1 |
| Offside Front Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
| Steering wheel rim loose (2.2.1 (c) (i)) | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced outer sills (7.1.1 (a) (i)) | 1 |
| Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt no lock tabs (5.3.4 (b) (ii)) | 1 |
| Oil leaking excessively from engine oil filter (8.4.1 (a) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/floor (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/floor (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/floor (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/floor (6.1.1 (c) (i)) | 1 |
| Rear Bumper likely to become detached insecure o/s (6.1.4 (a) (ii)) | 1 |
| Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction sticker on top of screen (3.1 (a) (ii)) | 1 |
| Rear Suspension rod attachment bracket/mounting insecure transverse (marked) (5.3.3 (a) (i)) | 1 |
| Nearside Front Position lamp switch does not operate in accordance with the requirements (4.2.2 (a)) | 1 |
| Offside Front Position lamp switch does not operate in accordance with the requirements (4.2.2 (a)) | 1 |
| Front Coil spring with an unsafe modification too low (5.3.1 (d) (i)) | 1 |
| Offside Front Parking brake lever has excessive movement indicating incorrect adjustment No reserve travel. (1.1.6 (c)) | 1 |
| Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
| Front Position lamp not working n/s and o/s (4.2.1 (a) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Centre floor |5.2.6| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Exhaust has a major leak of exhaust gases center to rear section join (6.1.2 (a)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i)) | 1 |
| Emissions not tested due to leak (8.2.1.2 (d)) | 1 |
| Offside Headlamp has a product on the lens so that the light output is severely reduced badly deteriorated |1.7.5a| | 1 |
| Rear fog lamp does not emit a steady red light SHOWING WHITE LIGHT TO REAR |4.5.4 |a|| | 1 |
| Nearside Anti-roll bar insecurely attached (5.3.3 (a) (i)) | 1 |
| Nearside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt buckle not functioning as intended (7.1.2 (d)) | 1 |
| coil spring broken n/s/r |2.4.C.1a| | 1 |
| Rear Brake disc significantly and obviously worn both sides (1.1.14 (a) (i)) | 1 |
| Offside Rear Inner Integral body structure inadequately repaired such that structural rigidity is significantly reduced wheel arch repaired with mesh and filler (6.1.1 (d) (i)) | 1 |
| Offside Integral body structure modified such that structural rigidity is significantly reduced sill corroded and holed (6.1.1 (d) (i)) | 1 |
| Vehicle structure is deformed and structural rigidity is significantly reduced centre floor reinforcements bent and weakened (6.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail corroded and holed (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Shock absorbers has an excessively worn bush lower bush (5.3.2 (c)) | 1 |
| Offside Front Shock absorbers has an excessively worn bush lower bush (5.3.2 (c)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rail corroded and holed (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rail corroded and holed (5.3.6 (a) (i)) | 1 |
| Offside Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Outer Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Offside Front Fluid suspension unit leaking |2.4.D.2| | 1 |
| Exhaust carbon monoxide content at idle exceeds default limits to high (8.2.1.2 (b)) | 1 |
| Nearside Front Front position lamp|s| not working sidelight |1.1.A.3b| | 1 |
| Power steering component leaking From Steering Rack Area (2.1.5 (a)) | 1 |
| Nearside Front Brake disc significantly and obviously worn Heavily scored inner face (1.1.14 (a) (i)) | 1 |
| Offside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak centre to rear box (8.2.1.1 (b)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door sill (5.3.6 (a) (i)) | 1 |
| Emissions not tested due to water leak during test (8.2.1.2 (d)) | 1 |
| Offside Rear Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Power steering component modified and steering adversely affected BELT MISSING (2.1.5 (f) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired FLOOR INCORRECT REPAIR NEEDS TO BE WELDED (7.1.1 (a) (i)) | 1 |
| Front Position lamp not working nearside/offside (4.2.1 (a) (ii)) | 1 |
| Nearside Front Hydraulic brake calliper insecurely mounted (1.1.16 (c) (i)) | 1 |
| Emissions unable to be completed C02 Too high and unable to determine date of first use (8.2.1.2 (d)) | 1 |
| Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen both (3.5 (a)) | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength flooring, x3 (5.3.6 (a) (i)) | 1 |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt split (2.1.3 (g) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded floor to sill in three places |5.2.6| | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill by rear wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill by rear wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Position lamp likely to become detached SIDE LIGHT NOT SECURED IN (4.2.1 (c) (ii)) | 1 |
| Position lamp likely to become detached SIDE LIGHT BULB NOT SECURE (4.2.1 (c) (ii)) | 1 |
| Electrical wiring insecure and connectors likely to become disconnected UNDERSIDE AT GEARBOX - HARNESS NOT SECURE (4.11 (a) (ii)) | 1 |
| Offside Front Shock absorbers insecurely attached (5.3.2 (a) (i)) | 1 |
| Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting n/s o/s rear inner sills holed corroded (6.2.2 (d) (i)) | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering floor to sill insufficient repair/welding (6.1.1 (c) (ii)) | 1 |
| Brake performance not tested vehicle overheated during emission test so no brake test carried out (1.2.1 (g)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front to rear floor |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting marked with yellow (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting marked with yellow (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced UNDER POWER STEERING BOTTLE AND INSIDE FRONT WHEEL ARCH (6.1.1 (c) (i)) | 1 |
| Offside Front Upper Suspension arm insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Nearside Steering locking device ineffective track rod nut (2.1.3 (d)) | 1 |
| Offside Steering locking device ineffective track rod nut (2.1.3 (d)) | 1 |
| Brake lever has abnormal movement of levers indicating excessive wear or maladjustment no reserve travel (1.1.15 (f)) | 1 |
| Offside Headlamp light intensity severely reduced dip |4.1.4 |a|| | 1 |
| Service brake effort inadequate at a wheel all (1.2.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/wheel arch (7.1.1 (a) (i)) | 1 |
| Nearside Vehicle structure inadequately repaired such that structural rigidity is significantly reduced chassis rails (6.1.1 (d) (i)) | 1 |
| Offside Vehicle structure inadequately repaired such that structural rigidity is significantly reduced chassis rails (6.1.1 (d) (i)) | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i)) | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i)) | 1 |
| Horn not working horn inop (7.7 (a)) | 1 |
| Exhaust has a major leak of exhaust gases exh blowing at middal box (6.1.2 (a)) | 1 |
| Emissions not tested exh blowing (8.2.1.2 (d)) | 1 |
| Nearside Front Body component likely to become detached Body wing (6.2.1 (a) (ii)) | 1 |
| Offside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect Pattern incorrect (4.1.2 (c)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill up right (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced centre floor (7.1.1 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill up right (5.3.6 (a) (i)) | 1 |
| Emissions not tested high Co
high lambda |8.2.1.2 |d|| | 1 |
| Emissions unable to be completed No catalytic converter fitted. (8.2.1.2 (d)) | 1 |
| Exhaust has a major leak of exhaust gases Cat to centre (6.1.2 (a)) | 1 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill full of filler (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer and inner sills (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced rear inner sill (7.1.1 (a) (i)) | 1 |
| Offside Front Steering wheel has excessive movement up and down (2.2.2 (a)) | 1 |
| Rear Exhaust has a major leak of exhaust gases exhaust pipe leaking at rear silencer . (6.1.2 (a)) | 1 |
| Nearside Rear brake caliper has restricted free movement parking brake no effort |3.5.1k| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/floor (7.1.1 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases from flexy pipe (6.1.2 (a)) | 1 |
| Emissions not tested due to condition of exhaust (8.2.1.2 (d)) | 1 |
| Offside Rear Rear fog lamp does not emit a steady red light white (4.5.4 (a)) | 1 |
| Emissions unable to be completed no cat (8.2.1.2 (d)) | 1 |
| Exhaust has a major leak of exhaust gases exhaust blowing at front exhaust joint (6.1.2 (a)) | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting insecure d bush bolt loose (5.3.3 (a) (i)) | 1 |
| Front Headlamp aim projected beam image is obviously incorrect nearside and offside (4.1.2 (c)) | 1 |
| Drivers seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i)) | 1 |
| Rear Service brake has no recorded effort at a wheel nearside and offside (1.2.1 (a) (ii)) | 1 |
| Stop lamp(s) remains on when the brakes are released (4.3.2 (a) (iii)) | 1 |
| Front Position lamp adversely affected by the operation of another lamp both position lamps illuminate when brake applied (4.2.3 (c)) | 1 |
| Offside Front Body panel likely to become detached Lower wing detached (6.2.1 (a) (ii)) | 1 |
| Offside Front Hydraulic brake calliper leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting o/s/r outer sill |6.2.2 |d| |i|| | 1 |
| Brake disc in such a condition that it is seriously weakened both rear (1.1.14 (a) (ii)) | 1 |
| Front Brakes imbalanced more than 50% across an axle Axle 1 (1.2.1 (b) (ii)) | 1 |
| Front Headlamp aim projected beam image is obviously incorrect Both sides |4.1.2 |c|| | 1 |
| Nearside Front Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
| Offside Front Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
| Emissions not tested due to missfire (8.2.1.2 (d)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting within 30cm of seatbelt (6.2.2 (d) (i)) | 1 |
| Offside Rear Lower Sub-frame attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chasis (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner sill (6.2.2 (d) (ii)) | 1 |
| Nearside Obligatory mirror does not provide a view to the rear |8.1.2b| | 1 |
| Anti-roll bar rubber mounting bonding deteriorated resulting in excessive movement Both front and rears |2.4.G.2| | 1 |
| brake disc in such a condition that it is seriously weakened Both front and rears |3.5.1i| | 1 |
| Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting both outer cill welding patch |6.2.2 |d| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch area by shock mount |6.1.B.2| | 1 |
| Offside Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassie leg inner , outer and lower (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassie leg inner , outer and lower (6.2.2 (d) (i)) | 1 |
| Central Exhaust has a major leak of exhaust gases before small silencer (6.1.2 (a)) | 1 |
| Nearside Front Headlamp insecure |4.1.1 |c|| | 1 |
| Power steering component leaking Steering rack both sides (2.1.5 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch front (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch front (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength undersill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength undersill (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill floor area |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill floor area |5.2.6| | 1 |
| Offside Rear Braking system leaking brake caliper area |3.6.A.1| | 1 |
| Nearside Rear Braking system leaking brake caliper area |3.6.A.1| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis leg area |2.4.A.3| | 1 |
| Offside Front Body panel insecure Arch (6.2.1 (a) (i)) | 1 |
| Nearside Rear Brake disc contaminated heavily corroded (1.1.14 (b)) | 1 |
| Offside Rear Brake disc contaminated heavily corroded (1.1.14 (b)) | 1 |
| Central Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Position lamp not working both front key off (4.2.1 (a) (ii)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor pan (6.1.1 (c) (i)) | 1 |
| Nearside Rear Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 1 |
| Offside Steering wheel has movement relative to the column indicating looseness (2.2.1 (a) (i)) | 1 |
| Emissions unable to be completed Coolant level low (8.2.1.2 (d)) | 1 |
| Nearside Rear Anti-roll bar linkage has an unsafe modification |5.3.3 |c| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Marked with yellow chalk (5.3.6 (a) (i)) | 1 |
| Battery insecure and likely to fall from carrier second battery left insecure in boot |4.13 |a| |ii|| | 1 |
| Nearside Front Brake hose damaged and likely to fail furrels rusty |1.1.12 |a|| | 1 |
| Offside Front Brake hose damaged and likely to fail furrels rusty |1.1.12 |a|| | 1 |
| Nearside Rear Brake hose damaged and likely to fail furrels rusty |1.1.12 |a|| | 1 |
| Offside Rear Brake hose damaged and likely to fail furrels rusty |1.1.12 |a|| | 1 |
| Nearside Front Road wheel fixing missing wheel nut missing |5.2.1 |a| |i|| | 1 |
| Offside Front Road wheel fixing missing wheel nut missing |5.2.1 |a| |i|| | 1 |
| Nearside Rear Road wheel fixing missing wheel nut missing |5.2.1 |a| |i|| | 1 |
| Offside Rear Road wheel fixing missing wheel nut missing |5.2.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed |7.1.1 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected floor/jacking point holed |5.3.6 |a| |ii|| | 1 |
| Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis rail holed |5.3.6 |a| |ii|| | 1 |
| Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis rail holed |5.3.6 |a| |ii|| | 1 |
| Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected floor pan / chassis rail holed |5.3.6 |a| |ii|| | 1 |
| Headlamp aim projected beam image is obviously incorrect BOTH (4.1.2 (c)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Front Service brake excessively binding both (1.2.1 (f)) | 1 |
| Hydraulic brake calliper leaking ALL FOUR CALIPERS LEAKING (1.1.16 (b) (i)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits DUE TO EXHAUST BLOW (8.2.1.2 (c)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 1 |
| Brake pedal reservoir fluid level decreases after several brake applications |3.3.C.1| | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits Exhaust leak centre area (8.2.1.2 (c)) | 1 |
| Rear fog lamp likely to become detached (4.5.1 (c) (ii)) | 1 |
| Nearside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Nearside Obligatory mirror missing (3.3 (a)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis to inner sill (6.1.1 (c) (i)) | 1 |
| Rear Stop lamp(s) not working all lamps! (4.3.1 (a) (ii)) | 1 |
| Brake disc significantly and obviously worn Both fronts (1.1.14 (a) (i)) | 1 |
| Brake disc significantly and obviously worn Both rears (1.1.14 (a) (i)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak Centre of exhaust (8.2.1.1 (b)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill and inner wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 1 |
| Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt Outer ball joint (5.3.4 (b) (ii)) | 1 |
| Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt Outer ball joint (5.3.4 (b) (ii)) | 1 |
| Offside Front Service brake excessively binding UNABLE TO TEST WHEEL BEARING (1.2.1 (f)) | 1 |
| Nearside Front Service brake excessively binding UNABLE TO TEST WHEEL BEARING (1.2.1 (f)) | 1 |
| Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Rear Service brake excessively binding UNABLE TO TEST WHEEL BEARING (1.2.1 (f)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill, forward most mount (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill forward most mount (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill forward most mount (7.1.1 (a) (i)) | 1 |
| Rear Anti-roll bar attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Offside Rear Battery insecure and likely to cause a short circuit in boot |4.13 |a| |ii|| | 1 |
| Nearside Front Power steering pipe/hose leaking return to resevoir (2.1.5 (a)) | 1 |
| Brake performance not tested oil leak from power steering (1.2.1 (g)) | 1 |
| Emissions not tested due to excessive oil leak from rack (8.2.1.2 (d)) | 1 |
| Nearside Rear front parking |secondary| brake grabbing severely |3.7.B.6b| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak cat (8.2.1.1 (b)) | 1 |
| Offside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear of outer sill corroded and holed (6.2.2 (d) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced rear sills excessively corroded (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced rear sills, floor and front chassis excessively corroded (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor excessively corroded (7.1.1 (a) (i)) | 1 |
| Offside Rear Lower Suspension arm attachment bracket/mounting likely to fail Inner rear bolt broken. (5.3.3 (b) (ii)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak not tested (8.2.1.1 (b)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer body sill |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer body sill |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii)) | 1 |
| Nearside Front Inner Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
| Nearside Rear Outer Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
| Offside Rear Fuel pipe damaged (6.1.3 (c) (ii)) | 1 |
| Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill holled (7.1.1 (a) (i)) | 1 |
| Offside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i)) | 1 |
| Nearside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL (6.2.2 (d) (i)) | 1 |
| Exhaust catalytic converter obviously modified Has been cut open (8.2.1.1 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (inner wheel arch) (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt insecure |5.3.4 |b| |ii|| | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt insecure |5.3.4 |b| |ii|| | 1 |
| Nearside Rear Drive shaft securing bolt loose (6.1.7 (a) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis to floor x4 (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis to floor (6.1.1 (c) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inside front of arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer Sill (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer Sill (6.1.1 (c) (i)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner Sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel Arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Suspension arm pin or bush likely to become detached Wishbone fixing loose, repair carried out as PRS following test (5.3.4 (a) (ii)) | 1 |
| Nearside Front Brake pipe likely to become detached or damaged Rigid pipe to Flexy hose clip missing (1.1.11 (d) (ii)) | 1 |
| Nearside Front Macpherson strut has an unsafe modification (5.3.3 (c) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner arch
|2.4.A.3| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded n/s o/s anti roll bar mounting |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s o/s rear inner sills |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s o/s rear inner wheel arch |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sills both sides (6.1.1 (c) (i)) | 1 |
| Front Brake pipe connection leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 1 |
| Central Exhaust has a major leak of exhaust gases section corroded and blowing (6.1.2 (a)) | 1 |
| Emissions unable to be completed excessive blow front center section of exhaust (8.2.1.2 (d)) | 1 |
| Nearside Rear Brake pipe leaking Failed during brake test |3.6.A.1| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded rear sub frame mount |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded sub frame rear mount |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing above anti roll bar mount |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded chassis rail below drivers seat |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded and holed |7.1.1 |a| |i|| | 1 |
| Nearside Front Anti-roll bar linkage ball joint likely to become detached lower attatchment |5.3.4 |a| |ii|| | 1 |
| Offside Front Anti-roll bar linkage ball joint likely to become detached lower attatchment |5.3.4 |a| |ii|| | 1 |
| Nearside Rear Anti-roll bar linkage ball joint likely to become detached lower attatchment |5.3.4 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength boot floor near suspension top mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill |7.1.1 |a| |i|| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Seat belt not functioning as intended Not returning (7.1.2 (c)) | 1 |
| Fuel system component leaking engine bay |7.2.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i)) | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Floor. 30cm of seat mounting. (6.2.2 (d) (i)) | 1 |
| Suspension arm ball joint excessively worn both front lower ball joints excessive lift. (5.3.4 (a) (i)) | 1 |
| Nearside Rear Sub-frame strengthening plate or fastening insecure sub frame brace bolt missing. (6.1.1 (b) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill corroded. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded. (7.1.1 (a) (i)) | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Floor (6.2.2 (d) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Floor (6.2.2 (d) (i)) | 1 |
| Front front parking |secondary| brakes imbalanced |3.7.B.6b| | 1 |
| Nearside Front Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
| Offside Front Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill (7.1.1 (a) (i)) | 1 |
| Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i)) | 1 |
| Rear Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill/ floor (7.1.1 (a) (i)) | 1 |
| Nearside Steering locking device missing track rod end (2.1.3 (d)) | 1 |
| Rear Exhaust has a major leak of exhaust gases pipe and cat joint (6.1.2 (a)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor pan (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Front Obligatory mirror insecure casing |8.1.1| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded floor two sill holed |5.2.6| | 1 |
| Emissions unable to be completed CO obviously too high to pass test. (8.2.1.2 (d)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer seal (7.1.1 (a) (i)) | 1 |
| Emissions not tested due to major leak |7.3.A.1| | 1 |
| Central Exhaust has a major leak of exhaust gases clamp / joint - insecure |7.1.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill and sill end (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill and sill end (5.3.6 (a) (i)) | 1 |
| Offside Front Driver`s door catch insecure |6.2.3 |c| |ii|| | 1 |
| Nearside Front Lower Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced and inner sill corroded (7.1.1 (a) (i)) | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced and inner sill corroded (7.1.1 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Stop lamp(s) not working High level (4.3.1 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired outer sill not fully welded (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired outer sill not fully welded (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired chassis not fully welded (5.3.6 (a) (i)) | 1 |
| Offside Rear Service brake lagging in operation |1.2.1 |d|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mounting area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mounting area |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill area |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill area |7.1.1 |a| |i|| | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced seat mounting area floor and chassis |7.1.1 |a| |i|| | 1 |
| Nearside engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 1 |
| Offside Front Upper Suspension arm locating pin retaining device not properly locked |2.4.G.3b| | 1 |
| Offside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Track rod end ball pin shank loose locking nut not completely tightened |2.2.B.1c| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Rear fog lamp adversely affected by the operation of another lamp also comes on with brake lights (4.5.4 (b)) | 1 |
| Nearside Headlamp not working on dipped beam intermittent (4.1.1 (a) (ii)) | 1 |
| Fuel system component leaking Fuel Filter union (6.1.3 (b) (i)) | 1 |
| Nearside Front Hydraulic brake calliper leaking union (1.1.16 (b) (i)) | 1 |
| Front Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii)) | 1 |
| Rear Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis corroded hole where anti roll bar D bush mounts (6.1.1 (c) (i)) | 1 |
| Exhaust has a major leak of exhaust gases Back box (6.1.2 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded antiroll bar/suspension chassis member. |2.4.A.3| | 1 |
| Brake performance not tested unable to start car (1.2.1 (g)) | 1 |
| Emissions not tested unable to start car (8.2.1.2 (d)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced hole close to seatbelt anchorage point (7.1.1 (a) (i)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced hole close to seatbelt anchorage point (7.1.1 (a) (i)) | 1 |
| Offside Front Steering locking device insecure |2.2.C.1g| | 1 |
| Emissions not tested The car was failing the co emission and over heated during the three min pre conditioning so aborted (8.2.1.2 (d)) | 1 |
| Nearside Front Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected Chassis rail (5.3.6 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end/arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end/arch (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis (6.2.2 (d) (i)) | 1 |
| Rear Rear fog lamp switch not operating in accordance with the requirements tale tale lamp (4.5.3 (a)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under and outer sill and sill end under rear wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer and under sill and sill end under rear wheelarch (5.3.6 (a) (i)) | 1 |
| Offside Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
| Offside Front Anti-roll bar rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 1 |
| Power steering pipe|s| or hose|s| excessively corroded All |2.3.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis in front of crossmember |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis in front of crossmember |2.4.A.3| | 1 |
| Rear Brake pipe leaking on a hydraulic braking system End of front to rear, burst under test. (1.1.11 (b) (ii)) | 1 |
| Nearside Rear Upper Suspension arm pin or bush excessively worn OUTER BUSH (5.3.4 (a) (i)) | 1 |
| Steering wheel retaining device missing (2.2.1 (b) (i)) | 1 |
| Nearside Front Position lamp not working flickers with engine running. |4.2.1 |a|| | 1 |
| Offside Front Position lamp light intensity significantly reduced with engine running lamp flashing. |4.2.3 |a| |ii|| | 1 |
| Offside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced wheel arch (6.1.1 (d) (i)) | 1 |
| Nearside Rear front parking brake recording little or no effort |3.7.B.6a| | 1 |
| Nearside Front All position lamps not working |4.2.1 |a|| | 1 |
| Offside Rear All position lamps not working |4.2.1 |a|| | 1 |
| Offside Rear Rear fog lamp missing |4.5.1 |a| |ii|| | 1 |
| Nearside Rear Brake pipe at imminent risk of failure or fracture burst during brake test (1.1.11 (a)) | 1 |
| Brake performance not tested due to brake pipe bursting (1.2.1 (g)) | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect Aim also to high (4.1.2 (c)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect Aim also to high (4.1.2 (c)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/s&os sill/ inner (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing detached (6.2.2 (d) (i)) | 1 |
| Headlamp not working on dipped beam O/S LAMP OUT DIP |1.7.5a| | 1 |
| Anti-lock braking system warning lamp is missing. |3.4.1a| | 1 |
| Offside Headlamp aim so that beam "kick up" is not visible on the screen |1.8.B.1| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Power steering pipe/hose leaking rubber hose from reservoir to steering rack ? (2.1.5 (a)) | 1 |
| Offside Rear Lower Suspension arm corroded and seriously weakened and cracking (5.3.3 (b) (i)) | 1 |
| Nearside Rear Anti-roll bar inappropriately repaired hitting coil spring |2.4.A.2| | 1 |
| Centre Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` Sat Nav, Camera etc removed for testing purposes |8.3.1e| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded & holed (7.1.1 (a) (i)) | 1 |
| Nearside Front Position lamp not working osf head light |4.2.1 |a|| | 1 |
| Offside Front Anti-roll bar insecurely attached |5.3.3 |a| |i|| | 1 |
| Exhaust emissions exceed default limit of 1.5m-1 |8.2.2.2 |b|| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion wing |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion arch |6.1.C.1| | 1 |
| Rear Anti-roll bar missing |2.4.G.1| | 1 |
| Nearside Rear Bumper insecure (6.1.4 (a) (i)) | 1 |
| Emissions not tested due to over heating (8.2.1.2 (d)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i)) | 1 |
| Rear Exhaust Lambda reading after 2nd fast idle outside specified limits rear exhaust leak (8.2.1.2 (c)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section |5.3.6 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced centre floor |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre floor |7.1.1 |a| |i|| | 1 |
| Nearside Front Brake hose damaged and likely to fail |1.1.12 |a|| | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner rear wheel arch front of arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Shock absorbers insecurely attached locking nuts loose (5.3.2 (a) (i)) | 1 |
| Emissions not tested unable to hold engine speed between 2500-3000 RPM (8.2.1.2 (d)) | 1 |
| Nearside Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 1 |
| Front Headlamp levelling device inoperative both front (4.1.5 (a)) | 1 |
| Front Windscreen wiper blade missing both front wipers |8.2.2| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits see ticket (8.2.1.2 (b)) | 1 |
| coil spring broken both front |2.4.C.1a| | 1 |
| Nearside Front Anti-roll bar linkage ball joint likely to become detached detached |5.3.4 |a| |ii|| | 1 |
| Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Emissions unable to be completed Due to exhaust leak (8.2.1.2 (d)) | 1 |
| Nearside Front Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill to arch (7.1.1 (a) (i)) | 1 |
| Power steering inoperative |2.1.5 |c| |i|| | 1 |
| Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear part of sill holed (6.1.1 (c) (i)) | 1 |
| Front Horn not working (7.7 (a)) | 1 |
| Fuel system component leaking engine bay (6.1.3 (b) (i)) | 1 |
| Nearside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Anti-roll bar linkage which is adjustable, loose in adjustment threads |2.4.G.1| | 1 |
| Brake cable has restricted free movement |3.5.1k| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced A post & wing (6.1.1 (c) (i)) | 1 |
| Nearside Rear Upper Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar linkage damaged and seriously weakened broke (5.3.3 (b) (i)) | 1 |
| Stop lamp(s) not working HIGH LEVEL (4.3.1 (a) (ii)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits 0.72% (8.2.1.2 (a)) | 1 |
| Offside Rear Parking brake inoperative on one side 45KG (1.4.1 (a)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits 0.77% (8.2.1.2 (b)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced CENTRE SILL / FLOOR (7.1.1 (a) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area seat mounting 2 holes (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area seat mounting (6.1.1 (c) (i)) | 1 |
| Brake servo defective or ineffective (1.1.10 (a) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear sill (6.1.1 (c) (i)) | 1 |
| Rear Suspension arm corroded and seriously weakened x2 (5.3.3 (b) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Hole to inner wheel arch (5.3.6 (a) (i)) | 1 |
| Emissions not tested Vehicle over heating during test (8.2.1.2 (d)) | 1 |
| Indicator switch inoperative (4.4.2 (a) (ii)) | 1 |
| Nearside Rear Anti-roll bar linkage attachment bracket/mounting fractured (5.3.3 (b) (ii)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both rear outer sills (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer and inner sill (7.1.1 (a) (i)) | 1 |
| Offside Integral body structure inadequately repaired such that structural rigidity is significantly reduced Inner Sill Marked in Yellow Chalk (6.1.1 (d) (i)) | 1 |
| Headlamp aim unable to be tested * (4.1.2 (b)) | 1 |
| Front Headlamp has a product on the lens so that the light output is severely reduced NS and OS weathered * (4.1.4 (b)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis leg: corroded / holed (5.3.6 (a) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced centre floor (6.1.1 (c) (i)) | 1 |
| Central Rear Emissions unable to be completed (8.2.1.2 (d)) | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced A piler (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension arm insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt split (2.1.3 (g) (ii)) | 1 |
| Emissions not tested oil level to low, (8.2.1.2 (d)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seat mount |6.1.B.2| | 1 |
| Nearside Stop lamp not working and offside |1.2.1b| | 1 |
| Nearside Front position lamp|s| not working and offside |1.1.A.3b| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded rear outer sill |5.2.6| | 1 |
| Front coil spring broken both |2.4.C.1a| | 1 |
| Rear coil spring broken both |2.4.C.1a| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill. (7.1.1 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Upper Suspension arm pin or bush excessively worn front and rear bush (5.3.4 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i)) | 1 |
| Offside Front Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
| Nearside Rear Position lamp lens seriously defective (4.2.1 (b)) | 1 |
| Offside Rear Position lamp lens seriously defective (4.2.1 (b)) | 1 |
| Offside Front Position lamp lens seriously defective side light (4.2.1 (b)) | 1 |
| Suspension component mounting prescribed area is excessively corroded both inner sills |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Floor pan |5.2.6| | 1 |
| Emissions unable to be completed car getting to hot (8.2.1.2 (d)) | 1 |
| Nearside Front Road wheel badly distorted (5.2.2 (c) (i)) | 1 |
| Offside Rear fog lamp adversely affected by the operation of another lamp bulb holders in wrong (4.5.4 (b)) | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp bulb holders in wrong (4.4.3 (b)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill rear end /quarter panel |5.2.6| | 1 |
| Brake performance not tested Leaking brake pipe (1.2.1 (g)) | 1 |
| Front Brake pipe leaking on a hydraulic braking system Front to rear (1.1.11 (b) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases at rear |7.1.2| | 1 |
| Exhaust system not adequately supported stud broken at rear |7.1.1| | 1 |
| Nearside Rear Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) | 1 |
| Nearside Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch/sill |6.2.2 |d| |i|| | 1 |
| Nearside Rear Road wheel badly distorted on inner rim detected |5.2.2 |c| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill corroded |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill corroded |5.2.6| | 1 |
| Offside Front Anti-roll bar linkage insecure in complete |2.4.G.1| | 1 |
| Nearside Front Brake hose excessively twisted |1.1.12 |b| |ii|| | 1 |
| Headlamp not working on dipped beam Both front |1.7.5a| | 1 |
| Headlamp not working on main beam Both front |1.7.5a| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced inner sling (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill under car (5.3.6 (a) (i)) | 1 |
| Offside Front front brake binding very slight bind |3.7.B.1| | 1 |
| Emissions unable to be completed Exhaust leak (8.2.1.2 (d)) | 1 |
| Central Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Body component damaged and likely to cause injury mirror casing (6.2.1 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill and floor (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill and floor (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner closing panel (5.3.6 (a) (i)) | 1 |
| Nearside Front Position lamp with a multiple light source more than 1/2 not functioning LED bulbs fitted (4.2.1 (a) (ii)) | 1 |
| Offside Front Position lamp with a multiple light source more than 1/2 not functioning LED bulbs fitted (4.2.1 (a) (ii)) | 1 |
| Central Front Power steering pipe/hose leaking |2.1.5 |a|| | 1 |
| Rear Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Rear Headlamp insecure |1.7.3| | 1 |
| Rear Exhaust emissions likely to be affected by an exhaust leak silencer (8.2.1.1 (b)) | 1 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits 1.08 |7.3.D.3| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak rear section of exhaust |8.2.1.1 |b|| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Chassis / inner wing |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar linkage has excessive play in a ball joint broken |2.4.G.2| | 1 |
| Nearside Front Track rod end seriously misaligned (2.1.3 (e)) | 1 |
| Offside Front Track rod end seriously misaligned (2.1.3 (e)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Corroded and holed by anti roll bar mounting . (5.3.6 (a) (i)) | 1 |
| Oil leaking excessively from engine sump area |8.4.1 |a| |i|| | 1 |
| Emissions not tested |7.4.B.1| | 1 |
| Offside Front Seat belt anchorage likely to become detached in the event of a collision floor holed (7.1.1 (a) (ii)) | 1 |
| Offside Front Upper coil spring cracked |2.4.C.1a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg anti-roll bar prescribed |2.4.A.3| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill x2 |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg anti-roll bar prescribed |2.4.A.3| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corroded (6.1.1 (c) (i)) | 1 |
| Offside Front Seat belt retracting mechanism defective (7.1.2 (e)) | 1 |
| Central Rear Exhaust has a major leak of exhaust gases joint (6.1.2 (a)) | 1 |
| Offside Rear Tie bar/rod fractured |2.4.G.1| | 1 |
| Nearside Rear Service brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill panel (7.1.1 (a) (i)) | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition rear silencer missing (8.1.1 (a)) | 1 |
| Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill holed (6.2.2 (d) (i)) | 1 |
| Nearside Front Upper Suspension arm locating pin locking device missing |2.4.G.3b| | 1 |
| Steering rack deformed and unserviceable |2.2.C.1d| | 1 |
| Nearside Front Upper coil spring broken |2.4.C.1a| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced of outer sill |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis above anti roll bar mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner |5.3.6 |a| |i|| | 1 |
| Steering system excessively rough Stiff In Operation On Lock To Lock |2.1.1 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner lower wheel arch area (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Anti-roll bar linkage ball joint likely to become detached Detached from wishbone (5.3.4 (a) (ii)) | 1 |
| Fuel pipe insecure Charcoal canister missing, pipes open and adrift in engine bay (6.1.3 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded NSR sill corroded and holed |5.2.6| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail corroded and holed sub frame mounting point (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail subframe mounting point corroded and holed (6.1.1 (c) (i)) | 1 |
| Offside Front Service brake grabbing severely |3.7.C.2| | 1 |
| Emissions not tested Cooling fan not working engine started to get hot. (8.2.1.2 (d)) | 1 |
| Nearside Rear Lower Suspension arm corroded and seriously weakened As marked. (5.3.3 (b) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer and under sill (7.1.1 (a) (i)) | 1 |
| Offside Headlamp flickers when tapped lightly by hand |1.2.4c| | 1 |
| Offside Inner Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i)) | 1 |
| Offside Front Anti-roll bar ball joint excessively worn detached (5.3.4 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill / wheel arch (5.3.6 (a) (i)) | 1 |
| Emissions not tested Due to being excessively, high risk of damage to machine (8.2.1.2 (d)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Floor area |5.2.6| | 1 |
| Position lamp not working Nearside and offside front (4.2.1 (a) (ii)) | 1 |
| Headlamp aim projected beam image is obviously incorrect Nearside and offside (4.1.2 (c)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill to floor (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
| Offside Front Outer Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion WING |6.1.C.1| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both side front chassis (5.3.6 (a) (i)) | 1 |
| Offside Rear Hydraulic fluid leaking excessively caliper (8.4.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 1 |
| Parking brake lever is not capable of being maintained in operation by direct mechanical action only |1.1.6 |f|| | 1 |
| Central Rear Rear fog lamp not working |1.3.2b| | 1 |
| Offside Front Anti-roll bar damaged and seriously weakened |2.4.G.1| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill area |6.1.B.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded floor panel |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill corrodedf middle and rear within 30cms mounting point |5.2.6| | 1 |
| Nearside Front Anti-roll bar linkage has excessive play in a ball joint drop link |2.4.G.2| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outter sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outter sill |2.4.A.3| | 1 |
| Rear Battery insecure under boot |1.9.1| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Emissions not tested due to misfire (8.2.1.2 (d)) | 1 |
| Rear Brake pipe at imminent risk of failure or fracture burst on rollers (1.1.11 (a)) | 1 |
| Offside Front Lower Suspension arm locating pin locking device not properly locked marked with yellow chalk. |2.4.G.3b| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out sill inadaquet repare (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill / floor (5.3.6 (a) (i)) | 1 |
| Central Exhaust has a major leak of exhaust gases joint and tail pipe (6.1.2 (a)) | 1 |
| Nearside Rear Brake disc significantly and obviously worn corroded on inner face (1.1.14 (a) (i)) | 1 |
| Offside Rear Brake disc significantly and obviously worn corroded on inner face (1.1.14 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases Middle joint. |7.1.2| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (2 holes) (7.1.1 (a) (i)) | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded under sill |2.4.A.3| | 1 |
| Nearside Front Body component corroded and likely to cause injury floor |6.2.1 |a| |i|| | 1 |
| Offside Rear Body component corroded and likely to cause injury outer sill |6.2.1 |a| |i|| | 1 |
| Offside Rear Body component corroded and likely to cause injury Inner wheel arch |6.2.1 |a| |i|| | 1 |
| Nearside Front Anti-roll bar linkage insecure and impairing directional stability |5.3.3 |a| |ii|| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chasse rail |6.1.B.2| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded Outer sill |2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Chassis. |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis. |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Outer sill. |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Outer sill. |2.4.A.3| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded Outer sill. |5.2.6| | 1 |
| Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
| Drive belt excessively worn |6.1.7 |c| |i|| | 1 |
| Nearside Rear Lower Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Front Lower Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Front Lower Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg holed . |5.3.6 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill area holed by corrosion. |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill area holed by corrosion. |7.1.1 |a| |i|| | 1 |
| Rear Exhaust emissions likely to be affected by an exhaust leak rear box joint and center joint (8.2.1.1 (b)) | 1 |
| Nearside Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired wheel arch |2.4.A.3| | 1 |
| Brake cable has wires broken and is significantly weakened front parking brake |3.5.1b| | 1 |
| Nearside Front Track rod end ball joint dust cover missing |2.2.C.1c| | 1 |
| Nearside Rear Anti-roll bar locating pin insecure |2.4.G.3a| | 1 |
| Emissions unable to be completed Engine Misfiring (8.2.1.2 (d)) | 1 |
| Nearside Front Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill corroded |7.1.1 |a| |i|| | 1 |
| Nearside Parking |secondary brake| on a single line braking system has inadequate effort at a wheel |1.3.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seat mounting inner sill |6.1.B.2| | 1 |
| Rear Exhaust has a major leak of exhaust gases where joins intermediate (6.1.2 (a)) | 1 |
| Front position lamp|s| not working Both |1.1.A.3b| | 1 |
| Offside Front Wheel bolt|s| loose |4.2.A.1e| | 1 |
| Offside Rear brake drum excessively pitted |3.5.1h| | 1 |
| Nearside Rear brake drum excessively pitted |3.5.1h| | 1 |
| Offside Rear Macpherson strut corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Front Brake hose excessively damaged flexi |3.6.B.4d| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Offside Rear fog lamp adversely affected by the operation of another lamp (4.5.4 (b)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassi |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassi |5.3.6 |a| |i|| | 1 |
| Position lamp not working Both NSF OSF (4.2.1 (a) (ii)) | 1 |
| Offside Front Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a| | 1 |
| Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis |5.3.6 |a| |i|| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Front Side repeater missing |1.4.A.2b| | 1 |
| Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Nearside Front Shock absorber insecure lower bolt/nut |2.7.2b| | 1 |
| Nearside Front Headlamp aim not tested to dim |4.1.2 |b|| | 1 |
| Nearside Rear Body component corroded and likely to cause injury wheel arch and sill |6.2.1 |a| |i|| | 1 |
| Offside Rear Body component corroded and likely to cause injury wheel arch and sill |6.2.1 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills / floor |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills / floor |7.1.1 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills / floor |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner and outer sills / floor |5.3.6 |a| |i|| | 1 |
| Offside Rear Body panel damaged and likely to cause injury sharp edge at wing (6.2.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill /inner wing as marked (6.1.1 (c) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wing as marked (7.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced lower face (6.1.1 (c) (i)) | 1 |
| Offside Front Upper Anti-roll bar linkage ball joint likely to become detached DETATCHED |5.3.4 |a| |ii|| | 1 |
| Emissions unable to be completed Due to coolant leak (8.2.1.2 (d)) | 1 |
| Nearside Front Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Offside Front Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Offside Front Headlamp excessively deteriorated so that the light output is severely reduced Bulb |1.7.5a| | 1 |
| Nearside Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired Patch not continuously welded (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sil |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sil |2.4.A.3| | 1 |
| Nearside Front Headlamp not working on dipped beam is on but very dim (4.1.1 (a) (ii)) | 1 |
| Central Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
| Exhaust emits visible black smoke at idle |7.3.A.2b| | 1 |
| Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction Fone holder etc |3.1 |a| |ii|| | 1 |
| Fuel cap/sealing device missing Temporary cap fitted |6.1.3 |b| |i|| | 1 |
| Emissions not tested Due to blow on exhaust |8.2.1.2 |d|| | 1 |
| Front Anti-roll bar pin or bush excessively worn n/s & o/s (5.3.4 (a) (i)) | 1 |
| Drivers view of the road through the swept area of the windscreen materially affected by an obstruction items hanging from mirror (3.1 (a) (ii)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded INNER WHEEL ARCH |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded INNER WHEEL ARCH |2.4.A.3| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded part of sill |5.2.6| | 1 |
| Nearside Front Upper Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded bottom |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor full length (5.3.6 (a) (i)) | 1 |
| Headlamp aim beam image obviously incorrect both dim |1.8.A.1b| | 1 |
| Offside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings inner sill plate screwed on. requires continuious welding around plate edges |6.1.B.2| | 1 |
| Headlamp not working on dipped beam Both sides |1.7.5a| | 1 |
| Brake performance not tested LEAKING CALIPER! (1.2.1 (g)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded Sill. |5.2.6| | 1 |
| Nearside Side repeater lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 1 |
| Nearside Seat belt not functioning as intended (7.1.2 (c)) | 1 |
| Rear Exhaust has a major leak of exhaust gases rear center section pipe |7.1.2| | 1 |
| Passengers seat insecure (6.2.6 (a) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor close to seat mounts (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill....close to suspension mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill....close to suspension mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg close to anti roll bar mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both outer sills (5.3.6 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage ball joint likely to become detached detached (5.3.4 (a) (ii)) | 1 |
| Nearside Front brake caliper securing device excessively deteriorated |3.5.1j| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength behind wheel (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis area |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Anti roll bar mounting |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Anti roll bar mounting |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded under sill |5.2.6| | 1 |
| Nearside Front Subframe mounting prescribed area is inadequately repaired chassis leg |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is inadequately repaired chassis leg |2.4.A.3| | 1 |
| Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wing (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance |1.3.2d| | 1 |
| Offside Driver`s seat insecure |6.2.A.1| | 1 |
| Nearside Front passenger seat insecure |6.2.3| | 1 |
| Rear fog lamp likely to become detached |4.5.1 |c| |ii|| | 1 |
| Rear fog lamp lens defective such that emitted light is adversely affected |4.5.1 |b| |ii|| | 1 |
| Front position lamp|s| incorrect colour both |1.1.A.3e| | 1 |
| Offside Rear An item not tested |Manual| | 1 |
| Offside Front Lower Seat belt webbing significantly weakened heat damage (7.1.2 (b) (ii)) | 1 |
| Nearside Front Lower Seat belt webbing significantly weakened webbing tied in a knot to the anchorage bracket (7.1.2 (b) (ii)) | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded floor pan |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor pan |5.2.6| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing (6.2.2 (d) (i)) | 1 |
| Rear fog lamp does not emit a steady red light |4.5.4 |a|| | 1 |
| Stop lamp not working centre |1.2.1b| | 1 |
| Rear Suspension component has an unsafe modification (5.3.3 (c) (i)) | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis (6.1.1 (c) (i)) | 1 |
| Offside Front Anti-roll bar linkage attachment bracket/mounting fractured |5.3.3 |b| |ii|| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting insecure drop link bolt loose (5.3.3 (a) (i)) | 1 |
| Offside Rear Battery insecure in boot |1.9.1| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded chassis holed |2.4.A.3| | 1 |
| Emissions not tested Exhaust blowing |7.3.A.1| | 1 |
| Central Exhaust system not adequately supported |7.1.1| | 1 |
| Centre Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced offside rear outer sill corroded and holed |7.1.1 |a| |i|| | 1 |
| Nearside Front Service brake excessively binding unable to test bearing (1.2.1 (f)) | 1 |
| Fuel cap/sealing device ineffective push in type - does not seal (6.1.3 (b) (i)) | 1 |
| Nearside Windscreen in an unacceptable condition damage over 40mm (3.2 (c) (i)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak rear of centre section and rear section (8.2.1.1 (b)) | 1 |
| Nearside Front Brake hose excessively twisted chafed and ends corroded also (1.1.12 (b) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill and wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill and closing panel inside front of rear wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Outer Rear Lower Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Seat belt anchorage prescribed area is excessively corroded nearside inner sill |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded nearside outer sill is detached from inner sill |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside front chassis |5.2.6| | 1 |
| Offside Front Anti-roll bar has excessive play in a ball joint detached |2.4.G.2| | 1 |
| Body has a sharp edge caused by corrosion offside rear wheel arch |6.1.C.1| | 1 |
| Offside Rear Road wheel fractured |4.2.B.1a| | 1 |
| Nearside Front Upper Suspension arm insecurely attached (5.3.3 (a) (i)) | 1 |
| Offside Front Upper Suspension arm insecurely attached (5.3.3 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded floor/inner sill |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded inner sill/floor |5.2.6| | 1 |
| Central Exhaust has a major leak of exhaust gases CAT to rear exhaust |6.1.2 |a|| | 1 |
| Exhaust catalytic converter obviously modified welded square around front of cat |8.2.1.1 |a|| | 1 |
| Rear Brake disc significantly and obviously worn inner face corroded (1.1.14 (a) (i)) | 1 |
| Emissions not tested petrol running out (8.2.1.2 (d)) | 1 |
| Nearside Rear Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 1 |
| Nearside Fuel cap/sealing device sealing washer missing |7.2.4c| | 1 |
| Nearside Front Braking system leaking Caliper hose seal |3.6.A.1| | 1 |
| Offside Rear Upper Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits CO. .60 |8.2.1.2 |b|| | 1 |
| Offside Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Windscreen wiper not working linkage disconnected (3.4 (a)) | 1 |
| Front Power steering pipe/hose leaking suspect pas pipes (2.1.5 (a)) | 1 |
| Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
| Offside Front Outer Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Exhaust has a major leak of exhaust gases Centre to Backbox |6.1.2 |a|| | 1 |
| Exhaust shield missing where fitted as original equipment creating a risk of fire Exhaust manifold (6.1.3 (e)) | 1 |
| Rear All direction indicators adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
| Exhaust has a major leak of exhaust gases from backbox to centre pipe |6.1.2 |a|| | 1 |
| Body has an unsafe modification all wheel bolts |6.2.1 |d| |i|| | 1 |
| Emissions unable to be completed engine overheat (8.2.1.2 (d)) | 1 |
| Offside Rear Lower Shock absorbers insecurely attached |5.3.2 |a| |i|| | 1 |
| Nearside Front Lower Suspension arm corroded and seriously weakened Shocker mount |2.4.G.1| | 1 |
| Offside Front Lower Suspension arm corroded and seriously weakened Shocker mount |2.4.G.1| | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/arch (6.1.1 (c) (i)) | 1 |
| Brake performance not tested leaking brake line (1.2.1 (g)) | 1 |
| Rear Emissions not tested |7.3.A.1| | 1 |
| Position lamp not working all |4.2.1 |a| |ii|| | 1 |
| Speedometer cannot be illuminated |7.8 |c| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg / at anti roll bar mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg / at anti roll bar mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill x2 |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i)) | 1 |
| Brake pipe seriously damaged |found during steering lock to lock check| across rear axle |2.2.D.2b| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced seat fixing (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis more than 1 place |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis more than 1 place |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases rear back box (6.1.2 (a)) | 1 |
| Exhaust has a major leak of exhaust gases middle section (6.1.2 (a)) | 1 |
| Nearside Rear Hydraulic brake calliper leaking and braking performance affected |1.1.16 |b| |ii|| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits See Emissions Sheet (8.2.1.2 (b)) | 1 |
| Fuel cap/sealing device missing cap |6.1.3 |b| |i|| | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Holes in outer sill |6.1.B.2| | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Holes in outer sill |6.1.B.2| | 1 |
| Nearside Front Anti-roll bar missing |2.4.G.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded wheel arch
|2.4.A.3| | 1 |
| Front Front position lamp|s| not working x2 |1.1.A.3b| | 1 |
| Headlamp aim beam image obviously incorrect x2 |1.8.A.1b| | 1 |
| Rear Seat belt anchorage prescribed area is excessively corroded sills x2 |5.2.6| | 1 |
| Front Headlamp incorrect colour |1.7.5b| | 1 |
| Central Exhaust has a major leak of exhaust gases Joints (6.1.2 (a)) | 1 |
| Rear Exhaust has a major leak of exhaust gases Joint on silencer (6.1.2 (a)) | 1 |
| Nearside Rear Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced undersill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Service brake grabbing severely (1.2.1 (c)) | 1 |
| Exhaust system insecure REAR BOX (6.1.2 (a)) | 1 |
| Offside Front Macpherson strut corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 1 |
| Nearside Front Suspension component ball joint likely to become detached locking devices missing on both ball joints (5.3.4 (a) (ii)) | 1 |
| Battery insecure (1.9.1) | 1 |
| Nearside Rear Integral body structure is deformed and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Offside Brake pipe leaking on a hydraulic braking system front to rear pipe joint at the rear (1.1.11 (b) (ii)) | 1 |
| Brake performance not tested due to caliper leaking and exsessive brake pedal travel (1.2.1 (g)) | 1 |
| Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt Nearside and offside (5.3.4 (b) (ii)) | 1 |
| Front Service brake excessively binding Nearside and offside (1.2.1 (f)) | 1 |
| Offside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings Seat belt |6.1.B.2| | 1 |
| Offside Rear Outer Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Nearside Rear Inner Body has a projection caused by corrosion wheel arch |6.1.C.1| | 1 |
| Front Body has a sharp edge caused by damage number plate surrounding |6.1.C.1| | 1 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid area covered in brake fluid (1.1.16 (b) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sil area inner and outer (6.1.1 (c) (i)) | 1 |
| Vehicle Identification Number has more than one different number displayed drivers door (0.2 (c)) | 1 |
| Nearside Side repeater lens defective such that the emitted light is adversely affected |4.4.1 |b| |ii|| | 1 |
| Offside Side repeater lens defective such that the emitted light is adversely affected |4.4.1 |b| |ii|| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded of outer sill area. |2.4.A.3| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill corroded |5.2.6| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill corroded |5.2.6| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded rear inner sill |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer & inner sill |7.1.1 |a| |i|| | 1 |
| Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Sub-frame severely distorted |2.4.G.1| | 1 |
| Rear position lamp|s| incorrect colour rears |1.1.A.3e| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Nearside Front Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
| Front Headlamp not working on dipped beam x2 |1.7.5a| | 1 |
| Power steering pipe|s| or hose|s| excessively corroded all front |2.3.2| | 1 |
| Offside Rear Brake pipe leaking under floor |3.6.A.1| | 1 |
| Brake performance not tested due to pipe possibly bursting |3.7.A.1| | 1 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded Sill |5.2.6| | 1 |
| Nearside Front Headlamp not working on dipped beam new bulb (4.1.1 (a) (ii)) | 1 |
| Seat belt anchorage prescribed area is excessively corroded Nearside rear outer sill |5.2.6| | 1 |
| Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Both inner sills (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill / floor pan (7.1.1 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front under covers (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Suspension arm corroded and seriously weakened shock mount (5.3.3 (b) (i)) | 1 |
| Centre Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting x2 |6.2.2 |d| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis /inner arch |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chgassis/inner arch |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded chassis leg |5.2.6| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak backbox join (8.2.1.1 (b)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill panel. (6.2.2 (d) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i)) | 1 |
| Offside Front Obligatory mirror missing (3.3 (a)) | 1 |
| Central Exhaust has a major leak of exhaust gases flexi section (6.1.2 (a)) | 1 |
| Horn sound not in accordance with requirements |7.7 |c|| | 1 |
| Exhaust has a major leak of exhaust gases Leaking from all joins and all mufflers, catalytic converter have cracks and leaking (6.1.2 (a)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Sil corroded all the way through (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Sil corroded all the way through (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sills |5.2.6| | 1 |
| Offside Front Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases centre and rear sections |6.1.2 |a|| | 1 |
| Exhaust emissions hydrocarbon content after 2nd fast idle excessive due to engine misfire |7.3.D.3| | 1 |
| Exhaust emissions carbon monoxide content at idle excessive due to miss fire |7.3.D.4| | 1 |
| Exhaust emissions hydrocarbon content after 2nd fast idle excessive due to missfire |7.3.D.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced chassis runner (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced chassis runner (7.1.1 (a) (i)) | 1 |
| Hydraulic fluid leaking excessively handbrake (8.4.1 (a) (i)) | 1 |
| Nearside Front Headlamp has a product on the lens which changes emitted colour to other than white or yellow (4.1.4 (b)) | 1 |
| Offside Front Headlamp has a product on the lens which changes emitted colour to other than white or yellow (4.1.4 (b)) | 1 |
| Emissions not tested due to oil leak (8.2.1.2 (d)) | 1 |
| Offside Headlamp aim beam image too far to the left |1.6.B4| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill chalked in yellow |7.1.1 |a| |i|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill chalked in yellow |7.1.1 |a| |i|| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch chalked in yellow |7.1.1 |a| |i|| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch chalked in yellow |7.1.1 |a| |i|| | 1 |
| Offside Rear Upper Suspension arm corroded and seriously weakened chalked in yellow |5.3.3 |b| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis, inside wheel arch, in 2 places next to suspension arm/subframe/anti-roll bar mountings chalked in yellow |5.3.6 |a| |i|| | 1 |
| Suspension arm corroded and seriously weakened both sides rear lower arms |2.4.G.1| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 1 |
| Windscreen in such a condition that visibility through swept area is seriously affected Large sticker at top of screen (3.2 (c) (ii)) | 1 |
| Nearside Seat belt anchorage loose buckle bolt loose (7.1.1 (b)) | 1 |
| Offside Seat belt flexible stalk damaged likely to lead to failure under load |5.2.4a| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings center inner sill hole |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases centre silencer (6.1.2 (a)) | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |marked| |6.1.B.2| | 1 |
| Offside Rear Braking system leaking calliper |3.6.A.1| | 1 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid Brake caliper |3.6.A.1| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Offside Rear Electrical wiring damaged, likely to cause a short |1.9.2b| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill *2 |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded marked in chalk |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded marked in chalk |5.2.6| | 1 |
| Central Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 1 |
| Nearside Seat belt locking mechanism does not secure or release parts missing |5.2.5a| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded on sill where marked |5.2.6| | 1 |
| Headlamp has a product on the lens so that the light output is severely reduced both front |4.1.4 |b|| | 1 |
| Nearside Rear Lower Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Offside Rear Anti-roll bar linkage corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear Anti-roll bar linkage corroded and seriously weakened |2.4.G.1| | 1 |
| Inner Rear Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 1 |
| Inner Front Brake pedal anti-slip provision missing |3.3.A.1b| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner sill and floor (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear inner sills and floor (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill hole (7.1.1 (a) (i)) | 1 |
| Offside Front Obligatory mirror seriously damaged, affecting the rear view |3.3 |b| |ii|| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded in two places. |7.1.1 |a| |i|| | 1 |
| Offside Rear wheel cylinder leaking Calliper leaking |3.6.A.1| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under bonnet (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i)) | 1 |
| Front Anti-roll bar linkage has excessive play in a pin/bush both |2.4.G.2| | 1 |
| Offside Front Braking system leaking to rear brake pipe |3.6.A.1| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis (6.2.2 (d) (i)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis anti roll bar mount |5.3.6 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill area |7.1.1 |a| |i|| | 1 |
| Rear Exhaust has a major leak of exhaust gases joint |6.1.2 |a|| | 1 |
| Rear Exhaust has a major leak of exhaust gases before joint (6.1.2 (a)) | 1 |
| Nearside Rear Lower Brake pipe leaking |3.6.A.1| | 1 |
| Nearside Inner Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| All outline marker lamps not working |4.2.1 |a|| | 1 |
| Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps (4.1.3 (b)) | 1 |
| Offside Seat belt anchorage likely to become detached in the event of a collision floor to sill |7.1.1 |a| |ii|| | 1 |
| Seat belt anchorage prescribed area is excessively corroded both outer sills |5.2.6| | 1 |
| Nearside Rear Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Coil spring with an unsafe modification |5.3.1 |d| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded close to anti-roll bar and upper wishbone mounting areas |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded close to anti-roll bar and upper wishbone mounting area |2.4.A.3| | 1 |
| Horn is a siren |1.6.2c| | 1 |
| Nearside Front brake drum excessively pitted |3.5.1h| | 1 |
| Offside Front brake drum excessively pitted |3.5.1h| | 1 |
| Position lamp not working |4.2.1 |a|| | 1 |
| Front Service brake excessively binding |1.2.1 |f|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded top arm mounting area |2.4.A.3| | 1 |
| Nearside Hazard warning lamps inoperative |1.4.B.1b| | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect headlight bulb fitted incorrectly (4.1.2 (c)) | 1 |
| Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail has holes (6.2.2 (d) (i)) | 1 |
| Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis rail has holes (6.2.2 (d) (i)) | 1 |
| Centre Rear Upper Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Front Brake disc significantly and obviously worn both (1.1.14 (a) (i)) | 1 |
| Rear Service brake excessively fluctuating both (1.2.1 (e)) | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Rust hole in floor pan |5.2.6| | 1 |
| Nearside Front Lower Steering linkage ball joint has excessive play |2.1.3 |b| |i|| | 1 |
| Brake performance not tested Brake pipe burst on test |3.7.A.1| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced end of sill (inner arch) (7.1.1 (a) (i)) | 1 |
| Emissions not tested computer fault |7.3.A.1| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis rail next to anti roll bar |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail next to anti roll bar |2.4.A.3| | 1 |
| Central Exhaust emissions likely to be affected by an exhaust leak central exhaust pipe leaking gases (8.2.1.1 (b)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded end of outer sill |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded end of outer sill |5.2.6| | 1 |
| Nearside Rear Suspension arm insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Offside Rear Suspension arm insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Nearside Rear Anti-roll bar linkage ball joint likely to become detached |5.3.4 |a| |ii|| | 1 |
| Rear Prop shaft securing bolt missing |6.1.7 |a| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill x 2 |6.1.1 |c| |i|| | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area is excessively corroded floor to sill |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill area (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner inner sill area (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Sill area (7.1.1 (a) (i)) | 1 |
| Nearside Front position lamp|s| flickers when tapped lightly by hand |1.1.4c| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 1 |
| brake disc in such a condition that it is seriously weakened both rear |3.5.1i| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front leg (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired front leg (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired outer sill (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area is inadequately repaired inner sill 2 holes (5.3.6 (a) (i)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor leg (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Brake performance not tested caliper binding and over heating |3.7.A.1| | 1 |
| Headlamp aim not tested Near side insufficient |4.1.2 |b|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Off side and near side sill to floor corroded within prescribed area |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill area |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis / inner arch area |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis / inner arch area |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis rail |2.4.A.3| | 1 |
| Nearside Rear Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt & lower |2.4.G.2| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded floor/inner sill |5.2.6| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill to chassis (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill corroded (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis behind wheel (5.3.6 (a) (i)) | 1 |
| Nearside Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance very dim |1.1.A.3d| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced bottom of arch (7.1.1 (a) (i)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak rear silencer (8.2.1.1 (b)) | 1 |
| Nearside Front Exhaust mounting missing |7.1.1b| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill to floor |5.2.6| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill to floor |5.2.6| | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed and corroded |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings flooring holed and corroded |6.1.B.2| | 1 |
| Nearside Rear Lower Suspension arm fractured |5.3.3 |b| |ii|| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded Inner wing holed and corroded |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outter sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outter sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/wheelarch (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded INNER SILL HOLED |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis leg |2.4.A.3| | 1 |
| Body has a projection caused by damage drivers door at rear |6.1.C.1| | 1 |
| Offside Front Outer Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded sill and inner sill under floor |5.2.6| | 1 |
| Rear Exhaust has a major leak of exhaust gases tailpipe |7.1.2| | 1 |
| Headlamps matched pair are not the same colour |1.7.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded both rear sills and inner sills |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill/arch (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill to floor plate |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is severely distorted sill to floor plate |5.2.6| | 1 |
| Nearside Rear Parking brake inoperative on one side ns .20kg . os = 166 kg |1.4.1 |a|| | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect poss polish both |4.1.2 |c|| | 1 |
| Central Exhaust has a major leak of exhaust gases joint |6.1.2 |a|| | 1 |
| Rear Exhaust has a major leak of exhaust gases exhaust box |7.1.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings near subfram |6.1.B.2| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill in 3 areas |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill & arch (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floorpan |5.2.6| | 1 |
| Nearside Front Anti-roll bar ball joint excessively worn lower (5.3.4 (a) (i)) | 1 |
| Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Emissions oxygen sensor obviously defective lamb reading to high on fast idle (8.2.2.1 (a)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Nearside Body has a sharp edge caused by corrosion 1/4 pannel |6.1.C.1| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail under forward section of floor pan |6.1.B.2| | 1 |
| Nearside Headlamp excessively deteriorated so that the light output is severely reduced dip beam |1.7.5a| | 1 |
| Nearside Headlamp adversely affected by the operation of another lamp high beam |1.7.5c| | 1 |
| Anti-roll bar linkage has excessive play in a ball joint both rear drop links |2.4.G.2| | 1 |
| Front wheel bearing rough when rotated both |2.5.A.2| | 1 |
| Exhaust has a major leak of exhaust gases rear section at mid pipe to backbox joint |7.1.2| | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill area, |5.2.6| | 1 |
| Nearside Rear brake caliper leaking hose |3.6.A.1| | 1 |
| Emissions not tested due to engine missfiring (8.2.1.2 (d)) | 1 |
| Offside Front Suspension arm corroded and seriously weakened by lower shock mounting (5.3.3 (b) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired inner sill not seam welded (7.1.1 (a) (i)) | 1 |
| Offside Front Body panel corroded and likely to cause injury arch (6.2.1 (a) (i)) | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired |6.2.2 |d| |ii|| | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired |6.2.2 |d| |ii|| | 1 |
| Offside Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside rear outer sill |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside rear outer sill |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded offside rear inner sill |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded nearside front chassis leg |2.4.A.3| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive 0.617 |7.3.D.3| | 1 |
| Hydraulic brake calliper leaking |1.1.16 |b| |i|| | 1 |
| Nearside Rear Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Rear Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Rear Upper Suspension arm locating pin insecure |2.4.G.3a| | 1 |
| Nearside Rear Lower Suspension arm locating pin insecure |2.4.G.3a| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section under wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section under wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis section (5.3.6 (a) (i)) | 1 |
| Nearside Front Steering system fouling plastic trim onto rack (2.1.4 (a)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed (7.1.1 (a) (i)) | 1 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Floor |6.1.B.2| | 1 |
| Electrical wiring likely to touch hot or rotating parts wiring loom insecure and fouling lower steering column coupling |4.11 |a| |iii|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner lower sill/floor corroded and holed |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired inner lower sill/floor corroded and inadequately repaired |7.1.1 |a| |i|| | 1 |
| Nearside Integral body structure is deformed and structural rigidity is significantly reduced central chassis leg damaged and deformed |6.1.1 |a| |i|| | 1 |
| Offside Integral body structure is deformed and structural rigidity is significantly reduced central chassis leg damaged and deformed |6.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg corroded and holed |5.3.6 |a| |i|| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer`s specified limits co reading 0.62% max limit 0.30% |8.2.1.2 |a|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside front chassis leg (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside rear outer sill (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside rear outer sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Emissions NOx sensor obviously defective (8.2.1.1 (a)) | 1 |
| Offside Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Front Headlamp aim beam image obviously incorrect both sides |1.8.A.1b| | 1 |
| Nearside Front Sub-frame insecurely attached bolts loose (5.3.3 (a) (i)) | 1 |
| Offside Front Sub-frame insecurely attached bolts loose (5.3.3 (a) (i)) | 1 |
| Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering inner wing (6.1.1 (c) (ii)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor to inner sill |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor to inner sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor to inner sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded chassic in wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis in wheel arch |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases Rear box (6.1.2 (a)) | 1 |
| Nearside Headlamp not working on dipped beam 472 (4.1.1 (a) (ii)) | 1 |
| Offside Front Road wheel fractured (5.2.2 (a)) | 1 |
| Exhaust has a major leak of exhaust gases back-box poor condition/ corroded/ leaking gases (6.1.2 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded INNER WING AREA |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded INNER WING AREA |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded (areas chalked) (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded (areas chalked) (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill section corrode (5.3.6 (a) (i)) | 1 |
| Power steering component leaking Steering rack (2.1.5 (a)) | 1 |
| Nearside Rear Tie bar/rod insecure |2.4.G.1| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill / out rigger (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill / out rigger (6.1.1 (c) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded chassis |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded chassis |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded chassis |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded chassis |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded inner sill at centre |5.2.6| | 1 |
| Offside Rear Additional braking device contacts damaged disc and pads |3.6.I.1| | 1 |
| Nearside Rear Additional braking device contacts damaged disc and pads |3.6.I.1| | 1 |
| Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings outer sill corroded |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill coroded |6.1.B.2| | 1 |
| Nearside Rear Road wheel cracked cracked |4.2.A.1a| | 1 |
| Offside Rear Road wheel cracked cracked |4.2.A.1a| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Upper Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear inner sill corroded into hole (6.2.2 (d) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill corroded with sharp edges |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill corroded with sharp edges |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Coil spring fractured or broken |5.3.1 |b| |i|| | 1 |
| Centre Front Upper Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg holed (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i)) | 1 |
| Nearside Anti-roll bar ball joint likely to become detached ball joint detached (5.3.4 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch holed by top wishbone mount |2.4.A.3| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive .60 |7.3.D.3| | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill corroded marked yellow (6.1.1 (c) (i)) | 1 |
| Rear Service brake lagging in operation BOTH SIDES (1.2.1 (d)) | 1 |
| Offside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch/chassis |2.4.A.3| | 1 |
| Position lamp not working Nearside and Offside (4.2.1 (a) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel panel (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded roll bar mounting |2.4.A.3| | 1 |
| Offside Rear Electrical wiring damaged and bare wires exposed rubbing on rear subframe |1.9.2c| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch front (5.3.6 (a) (i)) | 1 |
| Offside Front Headlamp not working on dipped beam possible earth fault |1.7.5a| | 1 |
| Rear Exhaust system not adequately supported tailpipe |7.1.1| | 1 |
| Offside Anti-roll bar linkage missing |2.4.G.1| | 1 |
| Emissions unable to be completed exhaust blowing to exess (8.2.1.2 (d)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor |7.1.1 |a| |i|| | 1 |
| Nearside Front Steering arm deformed and unserviceable |2.2.C.1d| | 1 |
| Nearside Front Track rod end deformed and unserviceable |2.2.C.1d| | 1 |
| Front Front position lamp|s| incorrect colour both sides |1.1.A.3e| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner and outer side sills |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner and outer side sills |5.2.6| | 1 |
| Brake reservoir fluid level decreases after several pedal applications |3.3.C.1| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel well |5.3.6 |a| |i|| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits fast idle (8.2.1.2 (b)) | 1 |
| Headlamp aim not tested due to both dip beam inop (4.1.2 (b)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced A post holed (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Anti-roll bar attachment bracket/mounting corroded and seriously weakened wheel arch (5.3.3 (b) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill adj to seatbelt mounting |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill adj to seatbelt mounting |5.2.6| | 1 |
| Offside Front Drivers airbag obviously inoperative (7.1.5 (c)) | 1 |
| Nearside Front Passengers airbag obviously inoperative (7.1.5 (c)) | 1 |
| Front Headlamp lens seriously defective Both front (4.1.1 (b) (ii)) | 1 |
| Nearside Front Lower Suspension arm ball joint likely to become detached Castle nut missing locking pin. (5.3.4 (a) (ii)) | 1 |
| Offside Front Suspension arm ball joint likely to become detached Castle nut missing locking pin. (5.3.4 (a) (ii)) | 1 |
| Offside Rear Upper Anti-roll bar worn and seriously weakened |2.4.G.1| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near anti roll bar mount (5.3.6 (a) (i)) | 1 |
| Offside Drivers seat insecure mounting area corroded (6.2.5 (a) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded rear of offside sill |5.2.6| | 1 |
| Offside Front Road wheel cracked |4.2.A.1a| | 1 |
| Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Body has a projection caused by damage |6.1.C.1| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle |6.1.B.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced undersill |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced undersill |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced undersill |7.1.1 |a| |i|| | 1 |
| Offside Rear Drive shaft which forms part of the suspension coupling gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
| Offside Rear Hydraulic fluid leaking excessively brake caliper |8.4.1 |a| |i|| | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 1 |
| Suspension component mounting prescribed area is excessively corroded floor holed along offside |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension arm likely to become detached (5.3.3 (a) (ii)) | 1 |
| Nearside Rear Lower Suspension arm likely to become detached (5.3.3 (a) (ii)) | 1 |
| Offside Rear Upper Suspension arm likely to become detached (5.3.3 (a) (ii)) | 1 |
| Offside Rear Lower Suspension arm likely to become detached (5.3.3 (a) (ii)) | 1 |
| Central Rear Exhaust system insecure (6.1.2 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength over subframe (5.3.6 (a) (i)) | 1 |
| Offside Front Service brake grabbing severely (1.2.1 (c)) | 1 |
| Offside Rear Sub-frame attachment bracket/mounting likely to become detached (5.3.3 (a) (ii)) | 1 |
| Emissions not tested Engine overheating and battery light on. |8.2.1.2 |d|| | 1 |
| Rear Brake pipe leaking on a hydraulic braking system front to rear pipe broken (1.1.11 (b) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg bottom |6.1.B.2| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive too high 64% |7.3.D.3| | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect lens fogged (4.1.2 (c)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect lens fogged (4.1.2 (c)) | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL |7.1.1 |a| |i|| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS / INNER WING |5.3.6 |a| |i|| | 1 |
| Offside Headlamp not working on dipped beam once full beam has been operated. (4.1.1 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/Body area (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded chassis rail in two places under drivers seat |5.2.6| | 1 |
| Exhaust emissions carbon monoxide content at idle excessive 360 |7.3.D.4| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded under seat as marked |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded under seat as marked |5.2.6| | 1 |
| Braking system leaking n/s/r brake caliper |3.6.A.1| | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting bolt missing bolts snapped |2.4.G.1| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill at |5.2.6| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill at |5.2.6| | 1 |
| Nearside Front Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 1 |
| Centre Exhaust catalytic converter missing where one was fitted as standard |7.1.3| | 1 |
| Nearside Front Position lamp not working and offside front |4.2.1 |a| |ii|| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inside the wheel arch area |6.1.B.2| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced middle inner sill corroded hole |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassi |5.3.6 |a| |i|| | 1 |
| Headlamp lens seriously defective both sides (4.1.1 (b) (ii)) | 1 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/floor (7.1.1 (a) (i)) | 1 |
| Brake performance not tested nearside rear caliper leak (1.2.1 (g)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to floor (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded lower arch/sill areas |5.2.6| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded floor to sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded underbody sill |2.4.A.3| | 1 |
| Front Headlamp lens seriously defective Nearside and Offside, Affecting beam pattern (4.1.1 (b) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Rear Rear reflector missing |1.5.1a| | 1 |
| Offside Front position lamp|s| not working n o dip |1.1.A.3b| | 1 |
| Nearside Front Braking system leaking caliper |3.6.A.1| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded rear sill area close to seat belt mounting |5.2.6| | 1 |
| Steering system excessively tight Lack of fluid? |2.2.D.1| | 1 |
| Offside Headlamp has a product on the light source so that the light output is severely reduced Connector on back of bulb loose /burnt! (4.1.4 (b)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch chassis leg next to sub frame mounting. (6.1.1 (c) (i)) | 1 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Headlamp not working on main beam dipped beam turns off when main beam is swiched on leaving just side lights on (4.1.1 (a) (ii)) | 1 |
| Offside Front Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Inner Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/jacking point (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/jacking point (6.1.1 (c) (i)) | 1 |
| Nearside Front Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/subframe mount (5.3.6 (a) (i)) | 1 |
| Emissions not tested NO OIL (8.2.1.2 (d)) | 1 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds default limits due to misfire (8.2.1.2 (b)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits due to misfire (8.2.1.2 (b)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis rail (5.3.6 (a) (ii)) | 1 |
| Central Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced rear outer side sill excessively corroded (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill rear end |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Hydraulic brake cylinder leaking hydraulic fluid Caliper (1.1.16 (b) (i)) | 1 |
| Emissions not tested Vehicle broke down during test |8.2.1.2 |d|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch (6.2.2 (d) (i)) | 1 |
| Front Headlamp not working on dipped beam both |1.7.5a| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i)) | 1 |
| Offside Rear Anti-roll bar ball joint excessively worn bolts loose (5.3.4 (a) (i)) | 1 |
| Offside Front Anti-roll bar ball joint excessively worn bolts loose (5.3.4 (a) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill both sides at the rear (6.1.1 (c) (i)) | 1 |
| Offside Vehicle structure is fractured and structural rigidity is significantly reduced inner sill to floor pan (6.1.1 (a) (i)) | 1 |
| Vehicle structure is fractured and structural rigidity is significantly reduced both sides inner and outer sills (6.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS (5.3.6 (a) (i)) | 1 |
| Offside Front Side repeater with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
| Nearside Front Anti-roll bar linkage severely distorted |2.4.G.1| | 1 |
| Power steering malfunctioning jumping on lock to lock |2.3.3a| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced bodysill (7.1.1 (a) (i)) | 1 |
| Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Central Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill. (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Inner sill |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ARB mount (chassis) (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ARB mount (chassis) (5.3.6 (a) (i)) | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive test stopped due to power steering pipe burst, co=31 |7.3.D.3| | 1 |
| Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3| | 1 |
| Body has a sharp edge caused by damage both front and nearside rear wheel arches |6.1.C.1| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded wing |5.2.6| | 1 |
| Nearside Front Lower Suspension arm inappropriately repaired |2.4.A.2| | 1 |
| Offside Front Lower Suspension arm inappropriately repaired |2.4.A.2| | 1 |
| Offside Front Inner Suspension component mounting prescribed area fractured significantly reducing structural strength wing |5.3.6 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases rear joint |6.1.2 |a|| | 1 |
| Offside Brake hose twisted |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Nearside Front Road wheel cracked |4.2.A.1a| | 1 |
| Brake performance not tested due to condition of braking system (1.2.1 (g)) | 1 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Nearside Lower Front suspension locking device missing |2.5.A.4| | 1 |
| Front Exhaust hydrocarbon content after 2nd fast idle exceeds default limits |8.2.1.2 |b|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch to chassis |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch to chassis |5.3.6 |a| |i|| | 1 |
| Centre Rear Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 1 |
| Nearside Front Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
| Nearside Rear Tie bar/rod attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits catalytic convertor fault (8.2.1.2 (b)) | 1 |
| Offside Rear Parking brake inoperative on one side very low reading (1.4.1 (a)) | 1 |
| Front Headlamp has a product on the lens so that the light output is severely reduced Both sides (4.1.4 (b)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Corrosion to N/S/R sill (7.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor pan to sill area holed |6.1.1 |c| |i|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill holed |6.1.1 |c| |i|| | 1 |
| Offside Steering rack gaiter insecure |2.2.D.2d| | 1 |
| Nearside Rear Braking system leaking metal pipe |3.6.A.1| | 1 |
| Offside Rear Brake pipe leaking on a hydraulic braking system Pipie from osr to nsr (1.1.11 (b) (ii)) | 1 |
| Vehicle structure has excessive corrosion which adversely affects braking or steering nearside and offside sill outter |6.1.A.1| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill corroded (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Inner sill half way along seat |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded Inner sill half way along seat |5.2.6| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Chassis rail within 30cm of sub frame mount |2.4.A.3| | 1 |
| Offside Rear Upper Anti-roll bar insecure drop link joint |2.4.G.1| | 1 |
| Nearside Front Outer Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 1 |
| Nearside Rear Brake pipe excessively damaged (1.1.11 (c)) | 1 |
| Nearside Inner Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Sill (5.3.6 (a) (ii)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings WHEEL ARCH |6.1.B.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis under wheel arch area |2.4.A.3| | 1 |
| Nearside Window in an unacceptable condition (3.2 (c) (i)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer`s specified limits c.o.0.57 to0.6 |8.2.1.2 |a|| | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect BAD EARTH (4.1.2 (c)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i)) | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill rotten |5.2.6| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer rail by anti roll bar mounting |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer rail by anti roll bar mounting |6.2.2 |d| |i|| | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting damaged and seriously weakened Bolt missing |5.3.3 |b| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in wheel arch (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases rear joint area (6.1.2 (a)) | 1 |
| Service brake excessively binding both front (1.2.1 (f)) | 1 |
| Central Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg. |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Both front chassis rails ,nearside and offside |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases Corroded through on rear joint |7.1.2| | 1 |
| Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount, inner wing |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill corroded at front (5.3.6 (a) (i)) | 1 |
| Emissions not tested due to excessive exhaust leak (8.2.1.2 (d)) | 1 |
| Rear Parking |secondary brake| on a single line braking system has no recorded effort at a wheel |1.3.1 |a| |ii|| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded outer sill and wheel arch |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded outer sill and wheel arch |2.4.A.3| | 1 |
| Offside Front Seat belt buckle missing (7.1.2 (d)) | 1 |
| Nearside Front Body panel insecure (6.2.1 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area is fractured chassis |2.4.A.3| | 1 |
| Centre Front Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 1 |
| Nearside Front Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/chassis rail (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill/ inner arch |5.3.6 |a| |i|| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits co to high (8.2.1.2 (b)) | 1 |
| Nearside Front Lower Suspension arm attachment bracket/mounting corroded and seriously weakened lower arm shock mount corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Offside Front Lower Suspension arm attachment bracket/mounting corroded and seriously weakened lower arm shock mount corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Front Track rod end ball joint has excessive play ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Nearside Rear Body panel corroded and likely to cause injury rear quarter panel corroded and split sharp edge likely to cause injury (6.2.1 (a) (i)) | 1 |
| Offside Rear Upper Suspension arm corroded and seriously weakened upper Suspension arm corroded and seriously weakened on end by hub (5.3.3 (b) (i)) | 1 |
| Brake pedal anti-slip provision missing half of the rubber missing (1.1.2 (c)) | 1 |
| Nearside Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt boot split (5.3.4 (b) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at anti roll bar mount (5.3.6 (a) (i)) | 1 |
| Offside Steering system has a road wheel fouling a part of the vehicle |2.2.D.2a| | 1 |
| Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outer sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Lower Suspension arm likely to become detached ball joint split pin missing (5.3.3 (a) (ii)) | 1 |
| Nearside Front Steering locking device missing split pin (2.1.3 (d)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Anti roll bar (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Anti roll bar (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded OUTER SILL |5.2.6| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits 0.71 |8.2.1.2 |b|| | 1 |
| Parking brake inoperative on one side |1.4.1 |a|| | 1 |
| Front passenger door cannot be opened from outside the vehicle Cant be opened from inside vehicle either. (6.2.3 (a)) | 1 |
| Fuel cap/sealing device ineffective Fuel flap cant be opened. (6.1.3 (b) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired Outer sill not welded along bottom. (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sill is corroded. (7.1.1 (a) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases exhaust box (6.1.2 (a)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill at centre of vehicle. (6.1.1 (c) (i)) | 1 |
| Offside Front Anti-roll bar linkage ball joint excessively worn broken |5.3.4 |a| |i|| | 1 |
| Offside Front Suspension arm ball joint excessively worn bottom |5.3.4 |a| |i|| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded. (7.1.1 (a) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill. (6.1.1 (c) (i)) | 1 |
| Nearside Outer Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Centre Rear Lower Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive 0.38% |7.3.D.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill areas marked in yellow |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill areas marked in yellow |5.2.6| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive 0.33% |7.3.D.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill area marked in yellow |5.2.6| | 1 |
| Emissions unable to be completed due to exhaust blowing (8.2.1.2 (d)) | 1 |
| Brake pipe inappropriately repaired Offside, front to rear pipe union |3.6.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Front Brake pipe leaking to rear,corroeded |3.6.A.1| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded inner sill under floor |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded by anti roll bar mount |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Rear Body panel corroded and likely to cause injury BOTH SIDE UNTER SEALS. WHEEL ARCH. |6.2.1 |a| |i|| | 1 |
| Nearside Rear Upper Brake pipe leaking on a hydraulic braking system to union (1.1.11 (b) (ii)) | 1 |
| Central Front Inner Brake performance not tested (1.2.1 (g)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis corroded (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis corroded (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded (7.1.1 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases mid section blowing |7.1.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corroded |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corroded |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases middle joint blowing |7.1.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill corroded
|6.1.B.2| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits 0.38 |8.2.1.2 |b|| | 1 |
| Battery insecure in boot |1.9.1| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced center under sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Shock absorber insecure |2.7.2b| | 1 |
| Nearside Front Suspension arm damaged and seriously weakened |2.4.G.1| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded centre floor |5.2.6| | 1 |
| Nearside Rear Brake pipe at imminent risk of failure or fracture |1.1.11 |a|| | 1 |
| Nearside Front Subframe mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis near antiroll bar (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure inadequately repaired such that structural rigidity is significantly reduced chassis inner wheel arch and under near antiroll bar support (6.1.1 (d) (i)) | 1 |
| Nearside Front Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded sill corroded |5.2.6| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
| brake disc insecure |3.5.1i| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mounting/chassis leg |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar mounting/chassis leg |2.4.A.3| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting leg (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting leg (6.2.2 (d) (i)) | 1 |
| Seat belt anchorage prescribed area is excessively corroded o/s and n/s rear outer sills |5.2.6| | 1 |
| front brake binding o/s and n/s |3.7.B.1| | 1 |
| front brake binding Nearside |3.7.B.1| | 1 |
| front brake binding Offside |3.7.B.1| | 1 |
| Hazard warning switch inoperative |4.4.2 |a| |ii|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner/sill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner/sill |2.4.A.3| | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting insecure bolt loose (5.3.3 (a) (i)) | 1 |
| Offside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner flitch |6.1.B.2| | 1 |
| Nearside Front Upper Suspension arm locating pin locking device not properly locked |2.4.G.3b| | 1 |
| Nearside Front Inner Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Front Drag link end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Nearside Power steering pipe/hose leaking over rack (2.1.5 (a)) | 1 |
| Offside Direction indicator not working |1.4.A.2c| | 1 |
| Rear Exhaust has a major leak of exhaust gases silencer flange corroded (6.1.2 (a)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |6.1.B.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis between subframe mounting & anti rollbar mounting bracket |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded cassis between subframe & antiroll bar mounting bracket |2.4.A.3| | 1 |
| Emissions not tested STARTED TO OVERHEAT (8.2.1.2 (d)) | 1 |
| Offside Rear Sub-frame insecurely attached (5.3.3 (a) (i)) | 1 |
| Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting main chassis rail damaged and holed. inner centrol os rail (6.2.2 (d) (i)) | 1 |
| Offside Rear Brake pipe leaking on an air braking system main front to rear |1.1.11 |b| |i|| | 1 |
| Seat belt anchorage prescribed area is inadequately repaired offside sill, patch not fully welded |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Floor/inner sill |5.2.6| | 1 |
| Brake pipe leaking on an air braking system Front to rear (1.1.11 (b) (i)) | 1 |
| Nearside Front Anti-roll bar linkage ball joint likely to become detached Nut slack (5.3.4 (a) (ii)) | 1 |
| Offside Front Anti-roll bar linkage ball joint likely to become detached Nut slack (5.3.4 (a) (ii)) | 1 |
| Offside Front Road wheel more than one fixing loose (5.2.1 (a) (ii)) | 1 |
| Nearside Front Inner Integral body structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Offside Front Inner Integral body structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Nearside Front Headlamp has a product on the light source so that the light output is severely reduced |4.1.4 |b|| | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits 1.091 |8.2.1.2 |c|| | 1 |
| Headlamp excessively deteriorated so that the light output is severely reduced both
|1.7.5a| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill
|2.4.A.3| | 1 |
| Emissions not tested Due To Exhaust Blow |7.3.A.1| | 1 |
| Offside Front Lower Suspension component mounting prescribed area fractured significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill holled x2 (7.1.1 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing |5.3.6 |a| |i|| | 1 |
| Central Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded anti roll bar attachment area |2.4.A.3| | 1 |
| Rear Brake pipe at imminent risk of failure or fracture pipe leaking (1.1.11 (a)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner (7.1.1 (a) (i)) | 1 |
| Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both sides (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner floor pan (6.2.2 (d) (i)) | 1 |
| Offside Front Steering locking device missing track rod end split pin missing (2.1.3 (d)) | 1 |
| Offside Front Lower Suspension arm ball joint likely to become detached split pin missing (5.3.4 (a) (ii)) | 1 |
| Nearside Rear Inner Steering component mounting prescribed area is excessively corroded SILL (2.1.2 (e) (i)) | 1 |
| Offside Rear Inner Steering component mounting prescribed area is excessively corroded SILL (2.1.2 (e) (i)) | 1 |
| Front Front position lamp|s| not working both |1.1.A.3b| | 1 |
| Front All position lamps light intensity significantly reduced blue light (4.2.3 (a) (ii)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis corroded between suspension bed and anti roll bar mounting |2.4.A.3| | 1 |
| Emissions not tested Exhaust blowing |8.2.1.2 |d|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg corroded and holed (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded rear sill section |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded sill section |5.2.6| | 1 |
| Exhaust fumes entering cabin (6.1.2 (b) (i)) | 1 |
| Nearside Rear Brake hose connection leaking on a hydraulic braking system connection to calliper. (1.1.12 (c) (ii)) | 1 |
| Central Brake pipe connection leaking on an air braking system front to rear (1.1.11 (b) (i)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits 070 ppm (8.2.1.2 (a)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits 1.04 (8.2.1.2 (c)) | 1 |
| Offside front brakes release unevenly |3.7.B.4| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corner (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corner (6.1.1 (c) (i)) | 1 |
| Emissions not tested Exhaust separated from back box. Gas tester will not pick up a reading at all |8.2.1.2 |d|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill to floor area |6.2.2 |d| |i|| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg |inner wheel arch| |6.1.B.2| | 1 |
| Battery insecure boot |1.9.1| | 1 |
| Rear Lower Exhaust emissions likely to be affected by an exhaust leak |8.2.1.1 |b|| | 1 |
| Body component corroded and likely to cause injury offside rear arch (6.2.1 (a) (i)) | 1 |
| Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Passenger`s seat insecure |6.2.6 |a| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wing/Chassis leg |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis in front of sub frame |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Chassis leg/Inner wheel arch |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded Outer sill/Wheel arch |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded Inner sill |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded Outer sill/Wheel arch |5.2.6| | 1 |
| Emissions not tested Engine missfire |7.4.B.1| | 1 |
| Nearside Front Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Obligatory mirror seriously obscured affecting the rear view |8.1.2a| | 1 |
| Nearside Front Headlamp light source and lamp not compatible HID |4.1.4 |c|| | 1 |
| Offside Front Headlamp light source and lamp not compatible HID |4.1.4 |c|| | 1 |
| Emissions not tested Due to silencer, emissions probe cannot be fitted |8.2.1.2 |d|| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill |7.1.1 |a| |i|| | 1 |
| Headlamp has a product on the lens so that the light output is severely reduced both head lamps . (4.1.4 (b)) | 1 |
| Headlamp aim projected beam image is obviously incorrect both front head light beam patterns blurred and scattered (4.1.2 (c)) | 1 |
| Rear fog lamp not working rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases exh blowing from multiple joints / new part bridging (6.1.2 (a)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak major exh leaks on exh (8.2.2.1 (b)) | 1 |
| Emissions oxygen sensor obviously defective lambda readings incorrect / see results sheet (8.2.1.1 (a)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak emission co levels failed / see fail sheet (8.2.1.1 (b)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasis rail |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Anti-roll bar ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Central Rear Emissions not tested EXAUST NOT COMPATABLE AS NO BOXES FITTED AND TOO LOUD (8.2.2.2 (e)) | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` Sun visors loose |8.3.1b| | 1 |
| Steering rack gaiter split Both front |2.2.D.2d| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill corroded and holed |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill corroded and holed |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases middle section |6.1.2 |a|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cill holed |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cill holed |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg |6.1.A.1| | 1 |
| Nearside Front Power steering pipe|s| or hose|s| leaking return pipe to tank |2.3.3b| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg |6.1.A.1| | 1 |
| Emissions not tested emissions |7.3.A.1| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill |6.2.2 |d| |i|| | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced chassis leg |6.1.1 |a| |i|| | 1 |
| Offside Front Brake lining|s| less than 1.5 mm thick |3.5.1g| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired sill section outer |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired sill section outer |5.3.6 |a| |i|| | 1 |
| Offside Front Brake disc significantly and obviously worn inner |1.1.14 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg at upper arm mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg at upper arm mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected CHASSIS LEG |5.3.6 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected CHASSIS LEG |5.3.6 |a| |ii|| | 1 |
| Offside Front Power steering pipe/hose corroded such that the steering is adversely affected RIGID PIPE HOLED AND CORRODED LEAKING (2.1.5 (g) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL |5.3.6 |a| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis outrigger |6.1.B.2| | 1 |
| Emissions not tested emission tester failure |7.3.A.1| | 1 |
| Offside rear parking |secondary| brake grabbing severely |3.7.B.6b| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis within inner arch |6.1.B.2| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive as per read out |7.3.D.3| | 1 |
| Offside Rear Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced marked in chalk,chassis rail (6.1.1 (c) (i)) | 1 |
| Central Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill,marked in chalk (7.1.1 (a) (i)) | 1 |
| Offside Front Position lamp not working Flickering (4.2.1 (a) (ii)) | 1 |
| Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both sides |6.2.2 |d| |i|| | 1 |
| rear brake grabbing severely |3.7.A.5b| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Floor pan/inner sill |5.2.6| | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits exhaust blow (8.2.1.2 (c)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis. right next to upper arm mounting (5.3.6 (a) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases centre section to back box joint |6.1.2 |a|| | 1 |
| Exhaust has a major leak of exhaust gases where back box joins centre pipe badly corroded |7.1.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outter sill |5.2.6| | 1 |
| Offside Rear Braking system leaking brake caliper |3.6.A.1| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded under section of chassis . |2.4.A.3| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded floor . |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner wheel arch. |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner wheel arch. |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor section. |5.2.6| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis leg. |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced Inner sill corroded (6.1.1 (a) (i)) | 1 |
| Emissions not tested concern of over heating while test was running,, co2 figures too high |8.2.1.2 |d|| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded Sill. May also affect seat belt mounting prescribed areas . |2.4.A.3| | 1 |
| Power steering pipe|s| or hose|s| leaking heavy oil leak around steering rack |2.3.3b| | 1 |
| Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced dipt |1.7.5a| | 1 |
| Nearside Rear Lower Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
| Emissions oxygen sensor obviously defective co emissions exceed limits (8.2.1.1 (a)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak Leak from centre section (8.2.1.1 (b)) | 1 |
| Emissions unable to be completed Due to leak from exhaust (8.2.1.2 (d)) | 1 |
| Front Direction indicator adversely affected by the operation of another lamp bulbs affected when side lamps on |1.4.A.2h| | 1 |
| Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings floor chassis ns and os cracks due to being lowered |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases rear joint corroded |7.1.2| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced centre floor seat floor to undersill |7.1.1 |a| |i|| | 1 |
| Central Seat belt anchorage prescribed area strength or continuity significantly reduced along undersill seatbelt |7.1.1 |a| |i|| | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases centre clamp (6.1.2 (a)) | 1 |
| Front Sub-frame insecurely attached bolt to body missing offside front (5.3.3 (a) (i)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak exhaust blowing from manifold (8.2.1.1 (b)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill. |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill. |7.1.1 |a| |i|| | 1 |
| Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Rear Exhaust has a major leak of exhaust gases Clamp flange corroded |7.1.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Middle chassis |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded Sill seam / floor |2.4.A.3| | 1 |
| Front Suspension component mounting prescribed area is severely distorted Both inner wings |2.4.A.3| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 1 |
| Seat belt anchorage prescribed area is excessively corroded both sides |5.2.6| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion outer sill |6.1.C.1| | 1 |
| Nearside Front Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |BALL JOINT| |2.2.C.1c| | 1 |
| Offside Front Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |BALL JOINT| |2.2.C.1c| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis holed and rotten |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded subframe and anti roll bar mounting chassis |2.4.A.3| | 1 |
| Power steering component|s| leaking steering pipe |2.3.3b| | 1 |
| Nearside Power steering component leaking (2.1.5 (a)) | 1 |
| Brake performance unable to be tested Vehicle Wont Run (1.2.1 (g)) | 1 |
| Offside Rear Braking system leaking caliper assembly |3.6.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower chassis leg |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings lower chassis leg |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill at rear |6.1.B.2| | 1 |
| Emissions not tested car broke down during preconditioning test |7.3.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded shockabsorber mount |2.4.A.3| | 1 |
| Offside Rear Body panel corroded and likely to cause injury sill |6.2.1 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases Catalyst leaking (6.1.2 (a)) | 1 |
| Prop shaft securing bolt loose Diff bolt (6.1.7 (a) (i)) | 1 |
| Emissions unable to be completed Due to catalyst leaking (8.2.1.2 (d)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded o/s/f inner sill/floor rusted and holed |5.2.6| | 1 |
| Nearside Parking brake not fitted on at least two wheels |3.1.1| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis at the anti roll bar mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis at the anti roll bar mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced At the inner sill (7.1.1 (a) (i)) | 1 |
| Supplementary restraint system warning lamp indicates a fault air bag (7.1.6 (a)) | 1 |
| Nearside Fuel cap/sealing device mounting flange/sealing method defective |7.2.4c| | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced chassis in wheel arch |6.1.1 |a| |i|| | 1 |
| Offside Rear Integral body structure strengthening plate or fastening insecure bolt sheared at rear wishbone |6.1.1 |b| |i|| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill panel |7.1.1 |a| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheelarch |6.1.1 |c| |ii|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheelarch |6.1.1 |c| |ii|| | 1 |
| Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced corrosion at outer |7.1.1 |a| |i|| | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded outer |5.2.6| | 1 |
| Offside Front Lower Anti-roll bar linkage ball joint likely to become detached has come become detached (5.3.4 (a) (ii)) | 1 |
| Offside Rear Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Central Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill within 30cm of chassis leg (6.1.1 (c) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases pipe to centre joint (6.1.2 (a)) | 1 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced under sill holed |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Chassis (5.3.6 (a) (ii)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis leg heavily corroded. (6.1.1 (c) (ii)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor corroded/holed. (6.1.1 (c) (i)) | 1 |
| Offside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Rear Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired Outer sill (7.1.1 (a) (i)) | 1 |
| Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt upper and lower (5.3.4 (b) (ii)) | 1 |
| Offside Obligatory mirror missing (3.3 (a)) | 1 |
| Emissions unable to be completed ex blow (8.2.1.2 (d)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis rail |2.4.A.3| | 1 |
| Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Offside Front Brake pipe leaking on a hydraulic braking system to rear (1.1.11 (b) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis holed (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner flitch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Lower Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive co 0.66 |7.3.D.3| | 1 |
| Offside Rear Upper Anti-roll bar linkage ball joint likely to become detached |5.3.4 |a| |ii|| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer`s specified limits co 0.64 |8.2.1.2 |a|| | 1 |
| Nearside Front Upper Anti-roll bar linkage fractured |2.4.G.1| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive co 0.63 |7.3.D.3| | 1 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits lamba 1.035 |7.3.D.3| | 1 |
| Rear Exhaust has a major leak of exhaust gases backbox flange (6.1.2 (a)) | 1 |
| Emissions not tested due to major oil leak (8.2.1.2 (d)) | 1 |
| Nearside Rear Brake pipe excessively damaged |3.6.B.2c| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner skin on sill |5.2.6| | 1 |
| Rear Service brake excessively binding both (1.2.1 (f)) | 1 |
| Nearside Front Position lamp not working sidelight |4.2.1 |a|| | 1 |
| Emissions not tested due to major misfire (8.2.1.2 (d)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced hole to chassis leg (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced hole to chassis leg (6.1.1 (c) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced hole to inner sill (7.1.1 (a) (i)) | 1 |
| Offside Subframe mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced OUTER SILL (7.1.1 (a) (i)) | 1 |
| Nearside Front position lamp|s| has a product on the light source so it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill corroded |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sill coroded |5.2.6| | 1 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor |7.1.1 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases broken (6.1.2 (a)) | 1 |
| Offside Rear Body has a sharp edge caused by corrosion Wheel-arch |6.1.C.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Anti-roll bar mounting[ under front wing] |2.4.A.3| | 1 |
| Offside Rear Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases centre exhaust (6.1.2 (a)) | 1 |
| Nearside Headlamp aim beam image obviously incorrect bulb fitting incorrect |1.8.A.1b| | 1 |
| Offside Windscreen wiper blade missing |8.2.2| | 1 |
| Offside Rear Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Suspension arm locating pin locking device not properly locked |2.4.G.3b| | 1 |
| Offside Rear Bonded suspension unit deteriorated and cannot function as intended corroded |2.4.F.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected outer sill (5.3.6 (a) (ii)) | 1 |
| Offside Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area fractured significantly reducing structural strength chassis (near brake pipe mount ) (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wing at anti roll bar mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wing and chassis at anti roll bar mounting (5.3.6 (a) (i)) | 1 |
| Nearside Steering locking device missing Track Rod End Split Pin (2.1.3 (d)) | 1 |
| Offside Steering locking device missing Track Rod End Split Pin (2.1.3 (d)) | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER AND OUTER SILL |6.1.B.2| | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits due to exhaust leak (8.2.1.2 (c)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired outer sill |2.4.A.3| | 1 |
| Nearside Rear Brake pipe leaking on an air braking system over axle (1.1.11 (b) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill small hole |5.2.6| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced o/s inner sill to floor pan (7.1.1 (a) (i)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits catalyst rattling/broken up (8.2.1.2 (b)) | 1 |
| Nearside Front Anti-roll bar linkage cracked broken/disconnected. |2.4.G.1| | 1 |
| Nearside Front Coil spring mounting loose |2.4.C.3a| | 1 |
| Offside Front Coil spring mounting loose |2.4.C.3a| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded Sill/floor area |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill/floor area |5.2.6| | 1 |
| Offside Front Lower Anti-roll bar linkage insecure disconnected |2.4.G.1| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Corroded area on box-section |2.4.A.3| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sill |7.1.1 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Chassis/body above sub frame |5.3.6 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Chassis/body above sub frame |5.3.6 |a| |ii|| | 1 |
| Offside Front Subframe mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Nearside Front Subframe mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired sill back and inner wheel arch |7.1.1 |a| |i|| | 1 |
| Offside Rear Lower Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases middle to rear box (6.1.2 (a)) | 1 |
| Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sill (6.2.2 (d) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner and outer sills corroeded at osr |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt buckle missing (7.1.2 (d)) | 1 |
| Rear Electrical wiring insecure |1.9.2a| | 1 |
| Exhaust has a major leak of exhaust gases middle to back join |7.1.2| | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded and holed (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis |5.3.6 |a| |i|| | 1 |
| Offside Front Body insecure wing (6.2.2 (a) (i)) | 1 |
| Offside Rear Hydraulic brake calliper leaking and braking performance affected |1.1.16 |b| |ii|| | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 1 |
| Nearside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 1 |
| Emissions not tested car would not restart to finish the test and emissions levels to high (8.2.1.2 (d)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Upper Suspension arm insecurely attached (5.3.3 (a) (i)) | 1 |
| Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 1 |
| Front Outer Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt both sides |2.2.C.1c| | 1 |
| Power steering component leaking pipe (2.1.5 (a)) | 1 |
| Nearside Brake pipe leaking |3.6.A.1| | 1 |
| Central Rear Upper Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak downpipe/cat joint blowing (8.2.2.1 (b)) | 1 |
| Headlamp levelling device inoperative both headlamps (4.1.5 (a)) | 1 |
| Offside Front Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings a pillar by upper door mount |6.1.B.2| | 1 |
| Rear Service brake indicates brake bind |3.7.D.2a| | 1 |
| Nearside Rear Lower Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Offside Inner Drivers seat with a defective structure Sill Corroded (6.2.5 (a) (i)) | 1 |
| Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i)) | 1 |
| Front Suspension arm rubber bush deteriorated resulting in excessive movement Both |2.4.G.2| | 1 |
| Rear Suspension arm has excessive play in a pin/bush Both |2.4.G.2| | 1 |
| Offside Rear Direction indicator incorrect colour Shows white light |1.4.A.2f| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded sill area as marked |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired Inner wheel arch anti roll bar mounting |2.4.A.3| | 1 |
| Front Body component damaged and likely to cause injury number plate (6.2.1 (a) (i)) | 1 |
| Front Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Front Inner Sill/Floor Pan (7.1.1 (a) (i)) | 1 |
| front brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded Outer Sill |5.2.6| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis leg from under wheel arch |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis leg from under bonnet and under wheel arch |2.4.A.3| | 1 |
| Drivers airbag missing After market steering wheel fitted with no airbag pad (7.1.5 (a)) | 1 |
| Nearside Front Outer Side repeater incorrect colour (4.4.3 (a)) | 1 |
| Offside Front Outer Side repeater incorrect colour (4.4.3 (a)) | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded rear sill |5.2.6| | 1 |
| Front Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b| | 1 |
| Brake performance not tested front to rear brake pipe burst whilst carrying out test |1.2.1 |g|| | 1 |
| Emissions not tested vehicle cut out and will not re-start |8.2.1.2 |d|| | 1 |
| Exhaust has a major leak of exhaust gases back box connection |7.1.2| | 1 |
| Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Service brake excessively binding o/s/r (1.2.1 (f)) | 1 |
| Headlamp not working on main beam n/s/f (4.1.1 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassy |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sll centuer |5.2.6| | 1 |
| Suspension component mounting prescribed area is excessively corroded inner arches |2.4.A.3| | 1 |
| Offside Rear Lower Battery insecure and likely to cause a short circuit boot area (4.13 (a) (ii)) | 1 |
| Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded chassis member |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded chassis member |5.2.6| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill panel |2.4.A.3| | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment Excessive travel |1.1.6 |c|| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded door sill |5.2.6| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded door sill |5.2.6| | 1 |
| Offside Inner Rear Braking system leaking |3.6.A.1| | 1 |
| Nearside Rear Brake pipe connection leaking on a hydraulic braking system no brake test (1.1.11 (b) (ii)) | 1 |
| Headlamp has a product on the lens which changes emitted colour to other than white or yellow both (4.1.4 (b)) | 1 |
| Emissions not tested exhaut leak |8.2.1.2 |d|| | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch corroded next to antiroll bar mount (6.1.1 (c) (i)) | 1 |
| Nearside Rear Anti-roll bar ball joint excessively worn link bar (5.3.4 (a) (i)) | 1 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded (6.1.1 (c) (i)) | 1 |
| Rear Anti-roll bar missing (5.3.3 (a) (ii)) | 1 |
| Offside Front Road wheel badly distorted (5.2.2 (c) (i)) | 1 |
| Offside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i)) | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Front position lamp|s| not working offside and nearside |1.1.A.3b| | 1 |
| Headlamp not in good working order |not working| |1.2.4a| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sill/arch |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill/arch |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner flitch/chassis |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill has 2 hole |7.1.1 |a| |i|| | 1 |
| Offside Rear Shock absorber casing damaged externally so the unit does not function |2.7.2a| | 1 |
| Offside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases at multiple joints (6.1.2 (a)) | 1 |
| Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed and corroded (6.1.1 (c) (i)) | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed and corroded (6.1.1 (c) (i)) | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed and corroded |6.1.1 |c| |i|| | 1 |
| Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill / floor holed and corroded |6.1.1 |c| |i|| | 1 |
| Nearside Rear Brake pipe excessively damaged going to flex |1.1.11 |c|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill been replaced (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired outer sill been replaced (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired outer sill been replaced (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired outer sill been replaced (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chorked |6.1.1 |c| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chorked |6.1.1 |c| |i|| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Floor at centre |5.2.6| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail |5.3.6 |a| |i|| | 1 |
| Rear Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
| Nearside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor excessively corroded |7.1.1 |a| |i|| | 1 |
| coil spring broken Both rear |2.4.C.1a| | 1 |
| Seat belt anchorage prescribed area is excessively corroded Floor along o/s |5.2.6| | 1 |
| Rear Exhaust has a major leak of exhaust gases no rear box |7.1.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is fractured outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is fractured outer sill |2.4.A.3| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OUTER SILL |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings OUTER SILL |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected subframe mount |5.3.6 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected subframe mount |5.3.6 |a| |ii|| | 1 |
| Offside Rear front parking brake recording little or no effort |3.7.B.6a| | 1 |
| Offside Front Electrical wiring insecure ABS sensor wire |1.9.2a| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor pan |5.2.6| | 1 |
| Nearside Rear Brake pipe inadequately clipped bracket on vehicle |3.6.B.1| | 1 |
| Headlamp light source and lamp not compatible both been converted to hid bulbs (4.1.4 (c)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded CHASSIS |2.4.A.3| | 1 |
| Central Vehicle structure is fractured and structural rigidity is significantly reduced sill section |6.1.1 |a| |i|| | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting osr inner sill (6.2.2 (d) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting os chassis leg (6.2.2 (d) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor holed/corroded |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor holed/corroded |7.1.1 |a| |i|| | 1 |
| Service brake excessively binding ALL FOUR (1.2.1 (f)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg where sub frame and anti roll bracket mounts |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail, behind anti-roll bar D bush mounting bracket |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail, behind anti-roll bar D bush mounting bracket |5.3.6 |a| |i|| | 1 |
| Emissions oxygen sensor obviously defective co2 is high (8.2.1.1 (a)) | 1 |
| Headlamp incorrect colour Both |1.7.5b| | 1 |
| Suspension component mounting prescribed area is excessively corroded Both front chassis rails |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Both outer sills |2.4.A.3| | 1 |
| Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Rear Stop lamp excessively damaged so that it is not visible from a reasonable distance |1.2.1d| | 1 |
| Offside Rear Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Rear Suspension arm corroded and seriously weakened upper wishbone |2.4.G.1| | 1 |
| Nearside Rear Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
| Exhaust has a major leak of exhaust gases Middle joint |6.1.2 |a|| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings 2X SIDE AND BOTTOM |6.1.B.2| | 1 |
| Nearside Rear Trailing arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Offside Rear Trailing arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Centre Front Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Centre Rear Exhaust has a part missing |7.1.1a| | 1 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Lower Seat belt anchorage prescribed area is inadequately repaired offside rear outer body sill corroded within 30cm of seatbelt mounting area and full of filler (7.1.1 (a) (i)) | 1 |
| Exhaust emissions - engine idle speed too high |8.2.1.2 |e|| | 1 |
| Nearside front brakes release unevenly |3.7.B.4| | 1 |
| Rear Exhaust has a major leak of exhaust gases EXHAUST BOX JOINT |6.1.2 |a|| | 1 |
| Central Exhaust has a major leak of exhaust gases EXHAUST SECTION REAR JOINT |6.1.2 |a|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced INNER AND OUTER SILL END |7.1.1 |a| |i|| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced SILL |7.1.1 |a| |i|| | 1 |
| Emissions not tested engine began overheat. Carbon Monoxide reading was high at the time. |8.2.1.2 |d|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill area
|2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength with in 30cm of anti roll bar mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis rail |6.1.B.2| | 1 |
| Offside Front Brake pipe inadequately clipped to rear |3.6.B.1| | 1 |
| Central Rear Exhaust has a major leak of exhaust gases join (6.1.2 (a)) | 1 |
| Rear Exhaust has a major leak of exhaust gases Flange corroded & bolt missing |7.1.2| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill floor |6.1.B.2| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both rear lower |7.1.1 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases middle + rear |6.1.2 |a|| | 1 |
| Brake disc in such a condition that it is seriously weakened rear |1.1.14 |a| |ii|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both front upper |5.3.6 |a| |i|| | 1 |
| Shock absorbers has an excessively worn bush offside front |5.3.2 |c|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced chassis rail (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component missing ball joint locking device (5.3.3 (a) (ii)) | 1 |
| Nearside Front Suspension component missing ball joint locking device (5.3.3 (a) (ii)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill, wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor |7.1.1 |a| |i|| | 1 |
| Nearside Front Lower Suspension component pin or bush excessively worn shockerbush |5.3.4 |a| |i|| | 1 |
| Offside Front Lower Suspension component pin or bush excessively worn shocker bush |5.3.4 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing near roll bar mount |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wing near roll bar mount |2.4.A.3| | 1 |
| Nearside Outer Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
| Offside Headlamp levelling device inoperative |4.1.5 |a|| | 1 |
| Emissions not tested Due to blowing exhaust |8.2.1.2 |d|| | 1 |
| Nearside Inner Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Body component corroded and likely to cause injury outer sill |6.2.1 |a| |i|| | 1 |
| Offside Rear Suspension arm attachment bracket/mounting insecure and impairing directional stability upper and lower arms bolts loose and nuts missing (5.3.3 (a) (ii)) | 1 |
| Track rod end ball joint has excessive play both n/s and o/s (2.1.3 (b) (i)) | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Anti-roll bar ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting insecure |5.3.3 |a| |i|| | 1 |
| Nearside Rear Lower Suspension arm pin or bush excessively worn outer (5.3.4 (a) (i)) | 1 |
| Offside Rear Lower Suspension arm pin or bush excessively worn outer (5.3.4 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively damaged significantly reducing structural strength hole cut out (5.3.6 (a) (i)) | 1 |
| Front Anti-roll bar missing (5.3.3 (a) (ii)) | 1 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Brake lever has insufficient reserve travel Parking brake |1.1.2 |a|| | 1 |
| Offside Rear Vehicle structure is fractured and structural rigidity is significantly reduced sill (6.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rail holes by mounting point (5.3.6 (a) (i)) | 1 |
| Emissions not tested due to misfire and exhaust blow (8.2.1.2 (d)) | 1 |
| Exhaust has a major leak of exhaust gases Tail Pipe Corroded |7.1.2| | 1 |
| Nearside Front Braking system leaking Out of/around bleed nipple area |3.6.A.1| | 1 |
| Exhaust has a major leak of exhaust gases rear flange corroded too excess (6.1.2 (a)) | 1 |
| Hazard warning switch inoperative not fitted (4.4.2 (a) (ii)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced in wheel arch (7.1.1 (a) (i)) | 1 |
| Hazard warning switch inoperative missing (4.4.2 (a) (ii)) | 1 |
| Offside Front Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis leg (6.2.2 (d) (i)) | 1 |
| Offside Front Suspension arm corroded and seriously weakened as marked |2.4.G.1| | 1 |
| Offside Rear Suspension arm corroded and seriously weakened as marked |2.4.G.1| | 1 |
| Offside Front front brake binding Stuck On |3.7.B.1| | 1 |
| Nearside Windscreen wiper missing (3.4 (a)) | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Exhaust has a major leak of exhaust gases rear joint . bolt snapped . centre joint blowing |6.1.2 |a|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis in wheel arch |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension arm attachment bracket/mounting corroded and seriously weakened Suspension arm corroded through (5.3.3 (b) (i)) | 1 |
| Offside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened Suspension arm corroded through (5.3.3 (b) (i)) | 1 |
| Nearside Rear brake disc contaminated by oil |3.5.1h| | 1 |
| Sub-frame attachment bracket/mounting insecure bolt sheared |2.4.G.1| | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i)) | 1 |
| Headlamp lens seriously defective Both (4.1.1 (b) (ii)) | 1 |
| Headlamp switch insecure |1.7.1| | 1 |
| Front All position lamps not in good working order |function impaired| |1.1.A.2a| | 1 |
| Offside Front Obligatory mirror missing |8.1.1| | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 1 |
| Nearside Rear Brake performance not tested binding |1.2.1 |g|| | 1 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Nearside Front Integral body structure strengthening plate or fastening insecure plate added on, not continuously welded |6.1.1 |b| |i|| | 1 |
| Brake performance unable to be tested leaking brake pipe (1.2.1 (g)) | 1 |
| Nearside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sil (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Offside Rear Inner Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wishbone mount (5.3.6 (a) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wishbone mount (5.3.6 (a) (i)) | 1 |
| Offside Rear brake caliper leaking leaks under pressure |3.6.A.1| | 1 |
| Seat belt anchorage prescribed area is severely distorted n/s/r and o/s/r outer sills |5.2.6| | 1 |
| Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive .301 |7.3.D.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg under wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength roll bar mount on chassis under arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake pipe connection leaking on an air braking system |1.1.11 |b| |i|| | 1 |
| Brake lever has insufficient reserve travel handbrake lever |1.1.2 |a|| | 1 |
| Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Rear Braking system leaking Hose to caliper. |3.6.A.1| | 1 |
| Offside Front Upper Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Anti-roll bar linkage ball joint dust cover missing |2.4.G.2| | 1 |
| Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 1 |
| Nearside Front Steering locking device missing Track Rod End |2.2.C.1g| | 1 |
| Offside Front Steering locking device missing Track Rod End |2.2.C.1g| | 1 |
| Offside Rear Brake pipe leaking on an air braking system front-rear (1.1.11 (b) (i)) | 1 |
| Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer Sill |6.1.B.2| | 1 |
| Nearside Front Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 1 |
| Front Suspension component corroded and seriously weakened all (5.3.3 (b) (i)) | 1 |
| Rear Suspension component corroded and seriously weakened all (5.3.3 (b) (i)) | 1 |
| Offside Rear Coil spring corroded so that its cross sectional area is reduced and seriously weakened (5.3.1 (b) (i)) | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre inner sill |6.1.B.2| | 1 |
| Power steering pipe|s| or hose|s| excessively damaged |2.3.2| | 1 |
| Engine MIL inoperative or indicates a malfunction NOT ILLUMINATING |8.2.1.2 |h|| | 1 |
| Offside Front Service brake excessively binding CALIPER |1.2.1 |f|| | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced middle (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg under (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg side (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg side (5.3.6 (a) (i)) | 1 |
| Nearside Rear Exhaust has a major leak of exhaust gases joint on rear box |7.1.2| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i)) | 1 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill has a hole (7.1.1 (a) (i)) | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill has a hole (7.1.1 (a) (i)) | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced floor has holes near fuel/brake lines (7.1.1 (a) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases affecting emmisions (6.1.2 (a)) | 1 |
| Offside Rear Upper coil spring broken |2.4.C.1a| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Chassis | antiroll bar mount| |2.4.A.3| | 1 |
| Centre Rear Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 1 |
| Headlamp not working on dipped beam offside |1.7.5a| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive centre |7.3.D.3| | 1 |
| Offside Front Anti-roll bar linkage synthetic bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Body has a projection caused by corrosion Qtr panel |6.1.C.1| | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Anti-roll bar (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Anti-roll bar (5.3.6 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front & rear floor (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear inner wings (5.3.6 (a) (i)) | 1 |
| Headlamp light intensity severely reduced off side bad earth (4.1.4 (a)) | 1 |
| Anti-roll bar linkage ball joint excessively worn near side front (5.3.4 (a) (i)) | 1 |
| Service brake excessively binding near side front (1.2.1 (f)) | 1 |
| Brake disc significantly and obviously worn near side rear and deteriorated (1.1.14 (a) (i)) | 1 |
| Brake disc significantly and obviously worn off side rear and deteriorated (1.1.14 (a) (i)) | 1 |
| Central Rear Lower Power steering pipe/hose leaking (2.1.5 (a)) | 1 |
| Offside Front Lower Shock absorbers likely to become detached lower suspension arm mounting excessively corroded (5.3.2 (a) (ii)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt upper/lower covers (5.3.4 (b) (ii)) | 1 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt upper/lower covers (5.3.4 (b) (ii)) | 1 |
| Nearside Front Upper Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside and nearside inner sills in front |5.2.6| | 1 |
| Offside Front Lower Anti-roll bar attachment bracket/mounting corroded and seriously weakened Anti roll bar link fixing corroded. (5.3.3 (b) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill. |7.1.1 |a| |i|| | 1 |
| Offside Front Position lamp not working sidelamp (4.2.1 (a) (ii)) | 1 |
| Emissions not tested rattle from engine (8.2.1.2 (d)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill corroded and hold 30 cm seatbelt mounting (6.1.1 (c) (i)) | 1 |
| Brake pipe at imminent risk of failure or fracture center to rear (1.1.11 (a)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Nearside Rear Vehicle structure has an inadequate repair which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Suspension arm insecure |2.4.G.1| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i)) | 1 |
| Offside Rear Position lamp has a product on the lens or light source which shows white light to the rear (4.2.3 (b) (ii)) | 1 |
| Front All position lamps light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings subframe mounting |6.1.B.2| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded to excess (7.1.1 (a) (i)) | 1 |
| Nearside Rear Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Anti roll bar mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced o/s rear outer/inner sill area (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension arm which is adjustable, locking device insecure |2.4.G.1| | 1 |
| Offside Front Lower Suspension arm insecure |2.4.G.1| | 1 |
| Offside Rear Upper Suspension arm which is adjustable, locking device insecure |2.4.G.1| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill floor area |5.2.6| | 1 |
| Nearside Rear Suspension arm corroded and seriously weakened lower arm |2.4.G.1| | 1 |
| Offside Rear Suspension arm corroded and seriously weakened lower arm |2.4.G.1| | 1 |
| Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Suspension arm locating pin locking device missing |2.4.G.3b| | 1 |
| Exhaust has a major leak of exhaust gases middle box |6.1.2 |a|| | 1 |
| Front Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Rear Service brake imbalanced across an axle |1.2.1 |b| |i|| | 1 |
| Offside Rear Shock absorbers insecurely attached |5.3.2 |a| |i|| | 1 |
| Nearside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced next to wheel arch, in line with seat belt (7.1.1 (a) (i)) | 1 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt Insecure (5.3.4 (b) (ii)) | 1 |
| Nearside Front Suspension arm attachment bracket/mounting likely to become detached bolts/nuts not tightened correctly, leading to excessive movement (5.3.3 (a) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill holed |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Sill (7.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced middle aroud brake line |6.1.1 |c| |i|| | 1 |
| Emissions unable to be completed car cutting out (8.2.1.2 (d)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits actual 0.54 limit 0.2 |8.2.1.2 |b|| | 1 |
| Offside Rear Battery insecure and likely to cause a short circuit Battery clamp very loose like to short out (4.13 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded ROLL BAR MOUNTING |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded ROLL BAR MOUNTING |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills holed. (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed (7.1.1 (a) (i)) | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill section |5.2.6| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is severely distorted sill section |5.2.6| | 1 |
| Front Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 1 |
| Nearside Front Brake hose excessively twisted rubbing on wheel on lock (1.1.12 (b) (ii)) | 1 |
| Nearside Front Lower Suspension arm corroded and seriously weakened shox mount (5.3.3 (b) (i)) | 1 |
| Nearside Front Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
| Nearside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 1 |
| Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Floor under drivers seat (6.2.2 (d) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan (7.1.1 (a) (i)) | 1 |
| Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering floor to sill n/s outer sill o/s front chassis |6.1.A.1| | 1 |
| Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt both |2.4.G.2| | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` sat nav holder |8.3.1b| | 1 |
| Nearside Rear Lower Braking system leaking brake caliper |3.6.A.1| | 1 |
| Offside Side repeater missing |4.4.1 |a| |ii|| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded shock |lower arm| |2.4.A.3| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded shock |lower arm |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassis/ wheel arch |5.3.6 |a| |i|| | 1 |
| Emissions unable to be completed lambda reading too high (8.2.1.2 (d)) | 1 |
| Rear Exhaust has a major leak of exhaust gases centre joint |7.1.2| | 1 |
| Nearside Front Power steering pipe/hose leaking near steering rack (2.1.5 (a)) | 1 |
| Offside Rear Anti-roll bar linkage insecure and impairing directional stability drop link broken (5.3.3 (a) (ii)) | 1 |
| Rear Service brake effort inadequate at a wheel both |1.2.1 |a| |i|| | 1 |
| Offside Front Lower Anti-roll bar linkage insecure joint |2.4.G.1| | 1 |
| Nearside Rear Brake pipe at imminent risk of failure or fracture pipe blown and leaking fluid (1.1.11 (a)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced seal (7.1.1 (a) (i)) | 1 |
| Brake performance not tested brake pipe burst (1.2.1 (g)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed & coroded |6.1.B.2| | 1 |
| Nearside Rear Brake hose inappropriately repaired |3.6.A.3| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is inadequately repaired sill |5.2.6| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is inadequately repaired sill |5.2.6| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail in engine bay |5.3.6 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner wheelarch |7.1.1 |a| |i|| | 1 |
| Offside Rear Anti-roll bar damaged and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis flich |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis flich |2.4.A.3| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |6.1.1 |c| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired filler |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded floor to sill mid to rear |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded floor to sill mid to rear |2.4.A.3| | 1 |
| Brake pipe at imminent risk of failure or fracture |1.1.11 |a|| | 1 |
| Offside Front Upper Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Front Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Brake pedal anti-slip provision loose splitting |1.1.2 |c|| | 1 |
| Nearside Front Upper Suspension component ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Exhaust emissions carbon monoxide content excessive Reading of 0.597 (8.2.1.2 (b)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner sill holed |5.3.6 |a| |ii|| | 1 |
| Offside Front Anti-roll bar linkage ball joint likely to become detached anti roll bar link |5.3.4 |a| |ii|| | 1 |
| Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis |6.1.1 |c| |i|| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced top of chassis under bonnet |6.1.1 |c| |i|| | 1 |
| Offside Front Service brake excessively binding Not allowing for correct testing of the wheel bearing. (1.2.1 (f)) | 1 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits too high |7.3.D.3| | 1 |
| Rear Exhaust has a major leak of exhaust gases back box has holes |7.1.2| | 1 |
| Nearside Rear Anti-roll bar ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill (6.1.1 (c) (i)) | 1 |
| Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cill (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Leg (6.2.2 (d) (ii)) | 1 |
| Nearside Front Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Leg (6.2.2 (d) (ii)) | 1 |
| Nearside Front All direction indicators incorrect colour |4.4.3 |a|| | 1 |
| Offside Front All direction indicators incorrect colour |4.4.3 |a|| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and floor (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired outer door sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid caliper |3.6.A.1| | 1 |
| Nearside Rear Lower Suspension arm pin or bush likely to become detached bolt broken (5.3.4 (a) (ii)) | 1 |
| Offside Front Upper Suspension arm pin or bush likely to become detached washer missing (5.3.4 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases at joint after cat (6.1.2 (a)) | 1 |
| Offside Front Suspension arm attachment bracket/mounting insecure pinch bolt loose (5.3.3 (a) (i)) | 1 |
| Rear Brake disc significantly and obviously worn both discs inner face (1.1.14 (a) (i)) | 1 |
| Front Service brake effort inadequate at a wheel both sides (1.2.1 (a) (i)) | 1 |
| Emissions not tested centre exhaust broken and leaking excessively. (8.2.1.2 (d)) | 1 |
| Central Exhaust has a major leak of exhaust gases centre exhaust broken and leaking excessively. (6.1.2 (a)) | 1 |
| Nearside Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 1 |
| Nearside Front Position lamp not working BLB501 (4.2.1 (a) (ii)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill holed (7.1.1 (a) (i)) | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Rear Exhaust has a major leak of exhaust gases tail pipe broken (6.1.2 (a)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassie (5.3.6 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassie (5.3.6 (a) (i)) | 1 |
| Nearside Rear Integral body structure is fractured and structural rigidity is significantly reduced inner sill |6.1.1 |a| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis under arch |2.4.A.3| | 1 |
| Offside Front Braking system leaking brake pipe corroded |3.6.A.1| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill |6.2.2 |d| |i|| | 1 |
| Nearside Front Hydraulic brake calliper leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
| Nearside Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
| Emissions not tested exhaust blowing |8.2.1.2 |d|| | 1 |
| Front Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILL |6.1.B.2| | 1 |
| Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
| Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Brake performance not tested brake pedal goes to the floor vehicle should not be driven on the road (1.2.1 (g)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill to floor wheel arch area (7.1.1 (a) (i)) | 1 |
| Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt outer (5.3.4 (b) (ii)) | 1 |
| Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt outer (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Braking system leaking caliper leaking |3.6.A.1| | 1 |
| Nearside front brake binding 45kgf |3.7.B.1| | 1 |
| Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded inner |5.2.6| | 1 |
| Nearside Rear Braking system leaking caliper area |3.6.A.1| | 1 |
| Nearside Rear Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner/outer sill. marked. (7.1.1 (a) (i)) | 1 |
| Rear Electrical wiring likely to drag on the ground (4.11 (a) (iii)) | 1 |
| Rear Electrical wiring heavily deteriorated (4.11 (b) (ii)) | 1 |
| Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Nearside Side repeater likely to become detached (4.4.1 (c) (ii)) | 1 |
| Offside Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Front Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
| Nearside Front Anti-roll bar linkage insecurely attached |5.3.3 |a| |i|| | 1 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering Both sides by the anti roll bar mount area (6.1.1 (c) (ii)) | 1 |
| Offside front brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting lower wing (6.2.2 (d) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (in engine bay) (5.3.6 (a) (i)) | 1 |
| Nearside Rear Sub-frame corroded and seriously weakened yellow chalk marking item |2.4.G.1| | 1 |
| Offside Rear Sub-frame corroded and seriously weakened yellow chalk marking item |2.4.G.1| | 1 |
| Service brake excessively fluctuating Both front (1.2.1 (e)) | 1 |
| Nearside Headlamp lens seriously defective Lens deteriorated (4.1.1 (b) (ii)) | 1 |
| Offside Headlamp lens seriously defective Lens deteriorated (4.1.1 (b) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill panel corroded (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail area |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded floor pan area |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing within |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg within |2.4.A.3| | 1 |
| Nearside Front Service brake excessively fluctuating offside front (1.2.1 (e)) | 1 |
| Nearside Front Lower Subframe mounting prescribed area is fractured |2.4.A.3| | 1 |
| Nearside Front Lower Vehicle structure has a fracture which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Front Outer Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Service brake imbalanced across an axle (1.2.1 (b) (i)) | 1 |
| Rear Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 1 |
| Offside Rear Suspension arm damaged and seriously weakened |5.3.3 |b| |i|| | 1 |
| Offside Front Lower Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected arch / anti rollbar mtg |5.3.6 |a| |ii|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected arch / anti rollbar mtg |5.3.6 |a| |ii|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill 3 places |7.1.1 |a| |i|| | 1 |
| Nearside Rear Upper coil spring incomplete |2.4.C.1a| | 1 |
| Offside Rear Upper coil spring incomplete |2.4.C.1a| | 1 |
| Offside Rear Upper Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Sound deadening material insecure under bonnet (8.1.1 (b) (i)) | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside outer sill |6.1.B.2| | 1 |
| Nearside Front Side repeater flashing less than 60 times a minute |1.4.A.2g| | 1 |
| Brake performance not tested leaking (1.2.1 (g)) | 1 |
| Rear Service brake excessively binding both nsr is worst (1.2.1 (f)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside and nearside sills corroded (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear offside and nearside sill backs to floor (5.3.6 (a) (i)) | 1 |
| Offside Rear Anti-roll bar linkage fractured |5.3.3 |b| |ii|| | 1 |
| Windscreen in such a condition that visibility through swept area is seriously affected |3.2 |c| |ii|| | 1 |
| Rear Battery insecure and likely to cause a short circuit |4.13 |a| |ii|| | 1 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired stitch welded |7.1.1 |a| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill |6.1.1 |c| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced center |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor corroded and holed (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outer sill corroded and holed (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Shock absorbers has an excessively worn bush |5.3.2 |c|| | 1 |
| Offside Rear Vehicle structure has a fracture which is likely to adversely affect braking or steering outer sill |6.1.1 |a| |ii|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill |6.1.1 |c| |i|| | 1 |
| Front Headlamp aim aimed so that it dazzles other road users lamps need buffing |1.8.A.1a| | 1 |
| Exhaust has a major leak of exhaust gases centra |7.1.2| | 1 |
| Nearside Front Steering component mounting prescribed area is excessively corroded next to power steering fluid |2.2.C.1h| | 1 |
| Nearside Front Steering rack insecure |2.2.B.1a| | 1 |
| Emissions not tested coolant leak |7.3.A.1| | 1 |
| Seat belt anchorage prescribed area is excessively corroded both outer sills and both rear arches |5.2.6| | 1 |
| Centre Front Inner Suspension component mounting prescribed area is excessively corroded wing/chassis |2.4.A.3| | 1 |
| Nearside Steering rack insecure |2.2.B.1a| | 1 |
| Centre Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 1 |
| Offside Rear Upper Suspension arm likely to fail |5.3.3 |b| |ii|| | 1 |
| Offside Rear Sub-frame corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
| Brake performance not tested not safe |1.2.1 |g|| | 1 |
| Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Front Lower Suspension arm corroded and seriously weakened shock absorber mounting point |2.4.G.1| | 1 |
| Offside Front Lower Suspension arm corroded and seriously weakened shock absorber mounting point |2.4.G.1| | 1 |
| Service brake lagging in operation brakes have excessive travel (1.2.1 (d)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid caliper |1.1.16 |b| |i|| | 1 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting osf chassis leg by anti roll bar mount (6.2.2 (d) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage ball joint likely to become detached loose; rectified. (5.3.4 (a) (ii)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Nearside outer sill. |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis nr anti roll bar |2.4.A.3| | 1 |
| Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Seat belt anchorage prescribed area is excessively corroded nsr outer sill |5.2.6| | 1 |
| Nearside Rear Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i)) | 1 |
| Offside Front Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 1 |
| Rear fog lamp tell-tale not working |4.9.1 |a| |ii|| | 1 |
| Front Power steering pipe/hose leaking |2.1.5 |a|| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 1 |
| Service brake excessively binding Both front (1.2.1 (f)) | 1 |
| Offside Steering rack insecure |2.2.B.1a| | 1 |
| Offside Front Anti-roll bar severely distorted |2.4.G.1| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill and rea arch corroded (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill and rear arch corroded (7.1.1 (a) (i)) | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Outer Sill Area (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Door Sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i|| | 1 |
| Centre Front Power steering component|s| leaking |2.3.3b| | 1 |
| Offside Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
| Nearside Front Undertray likely to become detached (6.2.1 (a) (ii)) | 1 |
| Offside Front Position lamp not working Bulb 501. (4.2.1 (a) (ii)) | 1 |
| Nearside Front Power steering ram|s| leaking from a failed seal |2.3.3b| | 1 |
| Nearside Front Headlamp lens seriously defective Lens opaque, poor dip image (4.1.1 (b) (ii)) | 1 |
| Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg , front wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg ,inner wheel arch (6.1.1 (c) (i)) | 1 |
| Exhaust has a major leak of exhaust gases Exhaust link pipe (6.1.2 (a)) | 1 |
| Offside Track rod end loose |2.2.B.1d| | 1 |
| Front position lamp|s| not working both front side lights |1.1.A.3b| | 1 |
| Nearside Inner Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill not welded (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corroded (7.1.1 (a) (i)) | 1 |
| Nearside Front Macpherson strut mounting has an unsafe modification leg is fouling upper suspension arm (5.3.3 (c) (i)) | 1 |
| Offside Front Lower Steering locking device missing ball joint no locking split pin (2.1.3 (d)) | 1 |
| Offside Rear Braking system leaking brake caliper leaking fluid |3.6.A.1| | 1 |
| Offside Front Steering column movement between the shaft and steering wheel |2.1.2b| | 1 |
| Nearside Rear Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering under drivers seat |6.1.A.1| | 1 |
| Front Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Corroded and holed within 30cm of driver seat mounting |6.2.2 |d| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Under wheel arch corroded and holed within 30cm of suspension mount |5.3.6 |a| |i|| | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits Due to exhaust blowing |8.2.1.2 |c|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Chassis Rail At Antiroll Bar Mounting Point |5.3.6 |a| |ii|| | 1 |
| Offside Rear Braking system leaking brake caliper fluid leak |3.6.A.1| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill at rear (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill at rear (6.2.2 (d) (i)) | 1 |
| Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced both sides lower floor / sill (7.1.1 (a) (i)) | 1 |
| Nearside Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Offside Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS LEG (5.3.6 (a) (i)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis both sides |6.1.1 |c| |i|| | 1 |
| Nearside Front Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance bulb dull |1.1.A.3d| | 1 |
| Offside Brake pipe leaking front to rear brake pipe under retaining clip |3.6.A.1| | 1 |
| Offside Rear Brake pipe at imminent risk of failure or fracture whee it splits across axle ((((( (1.1.11 (a)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill section |5.2.6| | 1 |
| Offside Rear Lower Suspension arm corroded and seriously weakened wishbone |2.4.G.1| | 1 |
| Nearside Rear Lower Suspension arm corroded and seriously weakened wishbone |2.4.G.1| | 1 |
| Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting near engine mount (6.2.2 (d) (i)) | 1 |
| Front rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outersill |2.4.A.3| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by subframe / anti roll bar mount |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by subframe / anti roll bar mount |5.3.6 |a| |i|| | 1 |
| Offside Obligatory mirror missing wing mirror glass |8.1.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill |6.1.B.2| | 1 |
| Front Exhaust carbon monoxide content after 2nd fast idle exceeds default limits Emission levels not met |8.2.1.2 |b|| | 1 |
| Nearside Front Position lamp not working Replaced bulb |4.2.1 |a|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill |7.1.1 |a| |i|| | 1 |
| Offside Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner cill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre cill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner cill |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner cill |6.1.B.2| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings centre inner cill |6.1.B.2| | 1 |
| Rear Exhaust has a major leak of exhaust gases Rear silencer blowing (6.1.2 (a)) | 1 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid |1.1.16 |b| |i|| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits .68 (8.2.1.2 (a)) | 1 |
| Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill by jacking point |6.1.B.2| | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill by jacking point |6.1.B.2| | 1 |
| Offside Front Position lamp not working Replaced bulb ----- N501 ----- |4.2.1 |a|| | 1 |
| Offside Windscreen wiper blade missing |3.4 |b| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner flitch area next to anti roll bar mounting bracket |5.3.6 |a| |i|| | 1 |
| Rear Anti-roll bar insecurely attached (5.3.3 (a) (i)) | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded sill/floor |5.2.6| | 1 |
| Nearside Front Anti-roll bar linkage insecurely attached popped ball (5.3.3 (a) (i)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits cat?? (8.2.1.2 (c)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg x2 (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis leg (6.2.2 (d) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis area (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced door shut (7.1.1 (a) (i)) | 1 |
| Nearside Rear brake disc has restricted free movement |3.5.1j| | 1 |
| Offside Rear brake disc has restricted free movement |3.5.1j| | 1 |
| Nearside Power steering ram leaking (2.1.5 (a)) | 1 |
| Emissions unable to be completed rear silencer broken (8.2.1.2 (d)) | 1 |
| Nearside Front Lower Anti-roll bar linkage insecurely attached loose (5.3.3 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn rear (5.3.4 (a) (i)) | 1 |
| Power steering inoperative belt missing (2.1.5 (c) (i)) | 1 |
| Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 1 |
| Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Rear Exhaust emissions likely to be affected by an exhaust leak rear silencer joint (8.2.1.1 (b)) | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill under car. (7.1.1 (a) (i)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits 1.1 (8.2.1.2 (b)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits 1.159 (8.2.1.2 (c)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer body sills (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer body sills (5.3.6 (a) (i)) | 1 |
| Central Exhaust has a major leak of exhaust gases exhaust has broke away |7.1.2| | 1 |
| Rear Anti-roll bar linkage severely distorted n/s o/s link has snaped away from subfram |2.4.G.1| | 1 |
| Nearside Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting fractured corroded off |2.4.G.1| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting fractured corroded off |2.4.G.1| | 1 |
| Exhaust has a major leak of exhaust gases corroded and cracked around centre silencer pipe |7.1.2| | 1 |
| Exhaust has a major leak of exhaust gases middle joint box broken and split |7.1.2| | 1 |
| Exhaust has a major leak of exhaust gases Exhaust middle clamp |7.1.2| | 1 |
| Nearside Rear Anti-roll bar attachment bracket/mounting fractured drop link mount corroded and broken off |2.4.G.1| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting fractured drop link mount corroded and broken off |2.4.G.1| | 1 |
| Offside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength Outer sill (5.3.6 (a) (i)) | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill with in 30cm. |7.1.1 |a| |i|| | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill with in 30cm. |7.1.1 |a| |i|| | 1 |
| Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill with in 30cm. |7.1.1 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor Panel (7.1.1 (a) (i)) | 1 |
| Nearside Rear Upper Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i)) | 1 |
| Brake pedal has insufficient reserve travel pedal to floor when testing rear brakes |1.1.2 |a|| | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis |5.3.3 |b| |i|| | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis |5.3.3 |b| |i|| | 1 |
| Offside Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b| | 1 |
| Brake pipe leaking on an air braking system front to rear |1.1.11 |b| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer cill (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer cill (7.1.1 (a) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner cill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner cill (6.1.1 (c) (i)) | 1 |
| Emissions not tested Exhaust blowing excessively |8.2.1.2 |d|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor torn |7.1.1 |a| |i|| | 1 |
| Nearside Rear Upper Shock absorbers insecurely attached (5.3.2 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded off side rear sill |5.2.6| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced at outer sill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced at outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Offside Rear Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Nearside Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Offside Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Front Body panel damaged and likely to cause injury plate holder. |6.2.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner arch |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired not fully seam welded (5.3.6 (a) (i)) | 1 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced door sill corroded (7.1.1 (a) (i)) | 1 |
| Nearside Front Service brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
| Offside Rear Anti-roll bar linkage inappropriately repaired mounted incorrectly |2.4.A.2| | 1 |
| Side repeater incorrect colour |1.4.A.2f| | 1 |
| Offside Front Upper Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Centre Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Rear Exhaust has a major leak of exhaust gases exhaust blow just before rear sliencer |7.1.2| | 1 |
| Offside Front Inner Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to sill |6.1.B.2| | 1 |
| Brake performance not tested burst brake pipe (1.2.1 (g)) | 1 |
| Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings FLOOR HOLED |6.1.B.2| | 1 |
| Offside Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Central Exhaust has a major leak of exhaust gases to rear silencer |7.1.2| | 1 |
| Anti-roll bar insecure rear anti roll bar fowling subframe |2.4.G.1| | 1 |
| Nearside Rear Brake hose leaking |3.6.A.1| | 1 |
| Offside Rear Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Nearside Rear Anti-lock braking system component inappropriately modified |3.4.4| | 1 |
| Offside Rear Anti-lock braking system component inappropriately modified |3.4.4| | 1 |
| Nearside Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 1 |
| Exhaust has a major leak of exhaust gases joints to middle box |7.1.2| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor to sill (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength chassis / anti roll bar mounting area ( underside ) (5.3.6 (a) (i)) | 1 |
| Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill |6.1.B.2| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Both front chassis legs |6.1.B.2| | 1 |
| Nearside Rear Drive shaft which forms part of the suspension coupling gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering sill |6.1.A.1| | 1 |
| Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Central Rear Body has a sharp edge caused by corrosion boot lid |6.1.C.1| | 1 |
| Central Rear Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer cill (7.1.1 (a) (i)) | 1 |
| Brake pipe leaking on a hydraulic braking system off side to near side rear (1.1.11 (b) (ii)) | 1 |
| Brake performance not tested pipe burst during test (1.2.1 (g)) | 1 |
| Offside Seat belt buckle not functioning as intended under load |7.1.2 |d|| | 1 |
| Offside Parking brake inoperative on one side low effort 46kgf (1.4.1 (a)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor/sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor/sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor/sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced floor /sill (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced mid floor/sill (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch/chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point |6.1.B.2| | 1 |
| Offside Rear Brake lever has restricted free movement |3.5.1k| | 1 |
| Nearside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded Floor pan |5.2.6| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Front Anti-roll bar linkage modified and seriously weakened |2.4.A.2| | 1 |
| Nearside Headlamp extinguishes when tapped lightly by hand |1.2.4c| | 1 |
| Rear Brake pipe leaking front to rear |3.6.A.1| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced OUTER SILL (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS LEG/ SUBFRAME MOUNT (5.3.6 (a) (i)) | 1 |
| Offside Headlamp excessively damaged so that the light output is severely reduced bulb |1.7.5a| | 1 |
| Nearside Front Coil spring fractured or broken at the top (5.3.1 (b) (i)) | 1 |
| Offside Rear Coil spring fractured or broken at the top (5.3.1 (b) (i)) | 1 |
| Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg (6.1.1 (c) (i)) | 1 |
| Offside Rear Hydraulic brake calliper insecurely mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
| Offside Rear Anti-roll bar linkage likely to become detached is detached (5.3.3 (a) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded center floor to sill |5.2.6| | 1 |
| Front Service brake excessively binding x2 (1.2.1 (f)) | 1 |
| Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Offside Windscreen wiper blade missing blade and arm not fitted (3.4 (b) (ii)) | 1 |
| Nearside Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction wiper parking on n/s swept area (3.1 (a) (ii)) | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Rear brake disc insecure |3.5.1i| | 1 |
| Nearside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill to floor |5.2.6| | 1 |
| Nearside Rear Outer Body has a sharp edge caused by corrosion arch |6.1.C.1| | 1 |
| Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg under bonnet |2.4.A.3| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill. |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Box section. |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Box section. |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded rear of outer sill |5.2.6| | 1 |
| Emissions not tested due to engine overheating (8.2.1.2 (d)) | 1 |
| Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill along its length. |6.1.B.2| | 1 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering both (6.1.1 (c) (ii)) | 1 |
| Rear Seat belt anchorage prescribed area strength or continuity significantly reduced both inner and outer sills (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Anti roll bar mount / chassis (5.3.6 (a) (i)) | 1 |
| Central Exhaust has a major leak of exhaust gases pipe (6.1.2 (a)) | 1 |
| Nearside Front Rear fog lamp not working |1.3.2b| | 1 |
| Offside Front Front position lamp|s| not working main beam |1.1.A.3b| | 1 |
| Suspension component mounting prescribed area is inadequately repaired Nearside front chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Rear Coil spring insecure Incorrectly located (5.3.1 (a) (i)) | 1 |
| Offside Rear Coil spring insecure Incorrectly located (5.3.1 (a) (i)) | 1 |
| Offside Front Direction indicator excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Offside Front Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outersill |5.3.6 |a| |i|| | 1 |
| Emissions not tested rear exhaust pipe missing |8.2.1.2 |d|| | 1 |
| Nearside Rear Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area (7.1.1 (a) (i)) | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Flitch |6.1.B.2| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Flitch |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings All Floor pan to sill |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings All floor pan so sill |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded nearside rear inner sill |5.2.6| | 1 |
| Offside Outer Rear brake disc excessively pitted |3.5.1h| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected anti roll bar mounting point holed and corroded (5.3.6 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected anti roll bar mounting point holed and corroded (5.3.6 (a) (ii)) | 1 |
| Fuel cap/sealing device ineffective temporary cap not sealing (6.1.3 (b) (i)) | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint POSSIBLY FEED OR RETURN PIPE |2.3.3b| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
| Nearside Front coil spring cracked |2.4.C.1a| | 1 |
| Nearside Rear Braking system leaking brake caliper. |3.6.A.1| | 1 |
| Headlamp aim projected beam image is obviously incorrect both front (4.1.2 (c)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting point ( inner wheel arch) (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mounting point (inner wheel arch) (5.3.6 (a) (i)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer`s specified limits Unable to carry out extended test as getting to hot |8.2.1.2 |a|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel, arch area |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Wheel arch area |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis leg under wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg under arch |2.4.A.3| | 1 |
| Nearside Front Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 1 |
| Emissions not tested severe exhuast leak |7.3.A.1| | 1 |
| Emissions not tested lambda reading high due to exhaust leak also catylist reading to high (8.2.1.2 (d)) | 1 |
| Nearside Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Offside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting |6.2.2 |d| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i|| | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting insecure and impairing directional stability |5.3.3 |a| |ii|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill front and rear |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill (7.1.1 (a) (i)) | 1 |
| Offside Outer Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
| Nearside Rear Vehicle structure inadequately repaired such that structural rigidity is significantly reduced (6.1.1 (d) (i)) | 1 |
| Drivers door cannot be opened from inside the vehicle (6.2.3 (a)) | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced centre inner and outer sill (7.1.1 (a) (i)) | 1 |
| Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Headlamp lens seriously defective BOTH (4.1.1 (b) (ii)) | 1 |
| Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ARCH (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ARCH (5.3.6 (a) (i)) | 1 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
| Offside Front Shock absorbers has an excessively worn bush LOWER BUSH (5.3.2 (c)) | 1 |
| Offside Rear Coil spring not correctly located top |2.4.C.2| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 1 |
| brake caliper leaking both rear |3.6.A.1| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired floor |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded sill and wheelarch |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Nearside rear Side sill |7.1.1 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Offside rear Side sill |7.1.1 |a| |i|| | 1 |
| Headlamp light source and lamp not compatible both fronts (4.1.4 (c)) | 1 |
| Anti-roll bar insecurely attached (5.3.3 (a) (i)) | 1 |
| Nearside Headlamp aim beam image obviously incorrect adjuster left/right inoperative |1.8.A.1b| | 1 |
| Offside Headlamp aim beam image obviously incorrect as nearside |1.8.A.1b| | 1 |
| Nearside Rear Braking system leaking damp |3.6.A.1| | 1 |
| Offside Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis box section at brake pipe holder |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassie leg holed next to cross member |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Outer chassis leg forward of sub-frame |5.3.6 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded sills |5.2.6| | 1 |
| Brake pedal fouling on other parts of the vehicle |3.3.A.4| | 1 |
| Nearside Rear Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
| Nearside Inner Suspension component mounting prescribed area is inadequately repaired Sill (5.3.6 (a) (i)) | 1 |
| Offside Outer Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Rear fog lamp not working rear fog and telltale not working |1.3.2b| | 1 |
| Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Main beam `tell-tale` not working |1.7.4c| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Floor holed (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Floor and rear of sill are holed (7.1.1 (a) (i)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner chassis rail |6.1.B.2| | 1 |
| Exhaust has a major leak of exhaust gases front to rear, corroding as well |7.1.2| | 1 |
| Nearside Front Power steering component|s| leaking |2.3.3b| | 1 |
| Nearside Rear Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Exhaust has a major leak of exhaust gases back box join (6.1.2 (a)) | 1 |
| Offside Outer Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Rear Exhaust has a major leak of exhaust gases system to rear silencer flange leaking (6.1.2 (a)) | 1 |
| Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt gaiter split (5.3.4 (b) (ii)) | 1 |
| Offside Rear Body has a sharp edge caused by corrosion wheel arch |wing| |6.1.C.1| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings next to the door |6.1.B.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis (6.1.1 (c) (ii)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis (6.1.1 (c) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area is inadequately repaired sill (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill corroded |5.2.6| | 1 |
| Fuel system component leaking excessively or a risk of fire Fuel filter leaking |6.1.3 |b| |ii|| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside below drivers seat |5.2.6| | 1 |
| Power steering pipe|s| or hose|s| inappropriately repaired |2.3.7| | 1 |
| Boot lid likely to become detached Tailgate corroded within 30cm of boot latch |6.2.1 |a| |ii|| | 1 |
| Front passenger door cannot be opened from inside the vehicle |6.2.3 |a|| | 1 |
| Front Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Rear Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill |6.2.2 |d| |i|| | 1 |
| Body component corroded and likely to cause injury Wings Corroded |6.2.1 |a| |i|| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced o/s/r sill and wheel arch (7.1.1 (a) (i)) | 1 |
| Emissions not tested co @ fast idle excessive (8.2.1.2 (d)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill area |5.2.6| | 1 |
| Offside Front Anti-roll bar linkage insecure and impairing directional stability drop link bar broken |5.3.3 |a| |ii|| | 1 |
| Offside Rear Anti-roll bar linkage insecure and impairing directional stability drop link bar broken |5.3.3 |a| |ii|| | 1 |
| Emissions not tested unable to produce a reading (8.2.1.2 (d)) | 1 |
| Battery insecure and likely to fall from carrier battery tray corroded (4.13 (a) (ii)) | 1 |
| Nearside Front Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii)) | 1 |
| Front Headlamp light source and lamp not compatible led bulbs (4.1.4 (c)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill corroded (6.1.1 (c) (i)) | 1 |
| Nearside Front Body has a sharp edge caused by damage bumper |6.1.C.1| | 1 |
| Rear Brake disc significantly and obviously worn both. (1.1.14 (a) (i)) | 1 |
| Nearside Rear Brake pipe at imminent risk of failure or fracture front to rear pipe burst on test. (1.1.11 (a)) | 1 |
| Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill. (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill. (6.1.1 (c) (i)) | 1 |
| Headlamp has a product on the lens so that the light output is severely reduced BOTHSIDE (4.1.4 (b)) | 1 |
| Nearside Rear Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 1 |
| Rear fog lamp switch inoperative no tell tail working (4.5.3 (a) (ii)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wing panel (7.1.1 (a) (i)) | 1 |
| Emissions not tested excess smoke (8.2.1.2 (d)) | 1 |
| Suspension arm attachment bracket/mounting corroded and seriously weakened front chassis legs both sides (5.3.3 (b) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering floor pan to sill |6.1.1 |c| |ii|| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings and rear inner sill to floor pans |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill |6.1.1 |c| |ii|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail by upper suspension arm |6.1.1 |c| |ii|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis rail by upper suspension arm |6.1.1 |c| |ii|| | 1 |
| Offside Front Supplementary restraint system warning lamp indicates a fault (7.1.6 (a)) | 1 |
| Central Rear Exhaust emissions likely to be affected by an exhaust leak central back box has completely fractured (8.2.2.1 (b)) | 1 |
| Central Rear Exhaust has a major leak of exhaust gases exhaust snapped off just after back box (6.1.2 (a)) | 1 |
| Offside Front Lower Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting chassis has 2 holes in. by brake pipe mounting point (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting hole inner floor (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting hole in floor (6.2.2 (d) (i)) | 1 |
| Nearside Front Inner Suspension arm insecure nut and bolt loose |2.4.G.1| | 1 |
| Nearside Rear Wheel insecure |4.2.A.1c| | 1 |
| Nearside Rear Wheel nut|s| loose mutiple |4.2.A.1e| | 1 |
| Offside Front Wheel nut|s| loose mutiple |4.2.A.1e| | 1 |
| Offside Rear Wheel nut|s| loose mutiple |4.2.A.1e| | 1 |
| Front Headlamp aim projected beam image is obviously incorrect both headlamp beam pattern is incorrect (incorrect bulbs) (4.1.2 (c)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits actual 0.61 limit 0.30 (8.2.1.2 (b)) | 1 |
| Offside Position lamp showing white light to the rear |4.2.3 |a| |ii|| | 1 |
| Offside Stop lamp|s| showing white light to the rear |4.3.3 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill /arch area (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/arch area (5.3.6 (a) (i)) | 1 |
| Power steering fluid reservoir empty topped up 1ltr ATF (2.1.5 (b) (ii)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced floor area (7.1.1 (a) (i)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced floor area (7.1.1 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg under wheel arch area (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg under wheel arch area (5.3.6 (a) (i)) | 1 |
| Front Brake disc significantly and obviously worn both front brake discs very heavily corroded due to vehicle being stood (1.1.14 (a) (i)) | 1 |
| Rear Brake disc significantly and obviously worn both rear brake discs very heavily corroded due to vehicle being stood (1.1.14 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced n /s/r inner wheel arch excess corrosion (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced o/s/r inner wheel arch excessive corrosion (7.1.1 (a) (i)) | 1 |
| Brake performance not tested brake test not carried out due to condition of brake discs (1.2.1 (g)) | 1 |
| Offside Rear Body panel corroded and likely to cause injury outer sill |6.2.1 |a| |i|| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill holed |2.4.A.3| | 1 |
| Offside Front Brake hose leaking on an air braking system |1.1.12 |c| |i|| | 1 |
| Nearside Front Brake hose excessively damaged |1.1.12 |b| |ii|| | 1 |
| Seat belt anchorage prescribed area is excessively corroded OFFSIDE INNER SILL |5.2.6| | 1 |
| Nearside Front Shock absorbers likely to become detached (5.3.2 (a) (ii)) | 1 |
| Offside Front Shock absorbers likely to become detached (5.3.2 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area fractured significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Offside Rear Brake disc significantly and obviously worn Scored, excessively corroded (1.1.14 (a) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill rear |5.2.6| | 1 |
| Emissions not tested Exhaust has a major leak of gasses and is affecting the emissions (8.2.1.2 (d)) | 1 |
| Headlamp aim projected beam image is obviously incorrect Both front (4.1.2 (c)) | 1 |
| Emissions not tested ran out of fuel (8.2.1.2 (d)) | 1 |
| Nearside Front Suspension arm corroded and seriously weakened Lower shock absorber mounting (5.3.3 (b) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Under wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Under wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill area (7.1.1 (a) (i)) | 1 |
| Front Headlamp not in good working order |not working| |1.2.4a| | 1 |
| Suspension component mounting prescribed area is excessively corroded n/s and o/s front chassis |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded n/s and o/s centre floor |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded floor under seat |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floor under seat |5.2.6| | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced at inner wing at o/s/f chassis |2.4.G.1| | 1 |
| Braking system leaking offside rear brake pipe to nearside rear flexi hose |3.6.A.1| | 1 |
| Rear Anti-roll bar attachment bracket/mounting insecure and impairing directional stability Near side rear D bush clamp insecure |5.3.3 |a| |ii|| | 1 |
| Nearside Front Sub-frame attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Offside Front Sub-frame attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Offside Front Brake pipe inadequately supported |3.6.B.1| | 1 |
| Hydraulic fluid leaking excessively Pas fluid (8.4.1 (a) (i)) | 1 |
| Nearside Front Headlamp not working on dipped beam A GLB-472 BULB WAS FITTED |4.1.1 |a| |ii|| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sill at rear |5.2.6| | 1 |
| Exhaust has a major leak of exhaust gases tail box |7.1.2| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill at rear |5.2.6| | 1 |
| Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Bumper damaged and likely to cause injury when grazed or contacted taped |6.1.4 |a| |i|| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits sheat |8.2.1.2 |b|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both inner wing |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill corroded (7.1.1 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill corroded/holed (7.1.1 (a) (i)) | 1 |
| Nearside Rear Outer Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Outer Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Emissions unable to be completed over heating (8.2.1.2 (d)) | 1 |
| Front Body has a sharp edge caused by damage Reg plate |6.1.C.1| | 1 |
| Nearside rear brake recording little or no effort Service and park |3.7.B.5a| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced chassis multiple hones (7.1.1 (a) (i)) | 1 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre inner sill (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Offside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner lower sill |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings along inner lower sill |6.1.B.2| | 1 |
| Nearside Rear Lower Anti-roll bar linkage has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Offside Front Braking system leaking caliper-hose |3.6.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner+outer sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill detached (7.1.1 (a) (i)) | 1 |
| Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Fluid leak harmful to the environment or a risk to other road users brake fluid leak (8.4.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis rail inner arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis and inner arch |2.4.A.3| | 1 |
| Rear Exhaust emissions likely to be affected by an exhaust leak exhaust box split. (8.2.1.1 (b)) | 1 |
| Exhaust has a major leak of exhaust gases at rear (6.1.2 (a)) | 1 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded outter |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outter sill |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor area (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area is inadequately repaired os floor area (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Central floor to sill holed / corroded (7.1.1 (a) (i)) | 1 |
| Nearside Front Headlamp not working on main beam electrical fault as dipped beam goes off (4.1.1 (a) (ii)) | 1 |
| Nearside Rear Road wheel badly distorted (5.2.2 (c) (i)) | 1 |
| Exhaust has a major leak of exhaust gases MIDDLE TO REAR JOIN (6.1.2 (a)) | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded Body sill |5.2.6| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded Body sill |5.2.6| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded Body sill |5.2.6| | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded Body sill |5.2.6| | 1 |
| Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner outer sill (6.2.2 (d) (i)) | 1 |
| Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner outer sills... (6.2.2 (d) (i)) | 1 |
| Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor holed (6.2.2 (d) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor /inner sill on jack point area |5.2.6| | 1 |
| Nearside Rear Radius arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
| brake caliper leaking |3.6.A.1| | 1 |
| Rear Exhaust has a major leak of exhaust gases box |6.1.2 |a|| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Near front Spring mount |6.1.B.2| | 1 |
| Front Headlamp aim beam image obviously incorrect Both fronts have no patten on tester |1.8.A.1b| | 1 |
| Exhaust has a major leak of exhaust gases Rear box joint |7.1.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering As marked (6.1.1 (c) (ii)) | 1 |
| Nearside Front Integral body structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced sill to floor area (6.1.1 (b) (ii)) | 1 |
| Offside Front Integral body structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced sill to floor area (6.1.1 (b) (ii)) | 1 |
| Nearside Front Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Offside Front Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill areas (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired inner and outer sill areas (7.1.1 (a) (i)) | 1 |
| Nearside Front Upper Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Offside Rear Brake damaged to the extent that braking performance is affected caliper leaking (1.1.21 (a) (ii)) | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition silencer missing (8.1.1 (a)) | 1 |
| Headlamp levelling device inoperative |4.1.5 |a|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced SILL CORRODED (7.1.1 (a) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis corroded at n/s/front adjacent to suspension mountings |6.1.1 |c| |ii|| | 1 |
| Offside Lower Suspension spring mounting prescribed area is excessively corroded outer sill next to a |2.4.A.3| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leg |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leg |5.3.6 |a| |i|| | 1 |
| Offside Rear brake disc modified and seriously weakened |3.5.1n| | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect lens deteriorated (4.1.2 (c)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect lens deteriorated (4.1.2 (c)) | 1 |
| Brake servo damaged and function impaired |3.6.A.2c| | 1 |
| Power steering pipe|s| or hose|s| fouling other parts of the vehicle chafing on radiator bottom hose |2.3.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis rail outer wall |2.4.A.3| | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits exhaust blowing (8.2.1.2 (c)) | 1 |
| Offside Front Headlamp aim beam image too far to the left |1.6.B4| | 1 |
| Nearside Rear Braking system leaking |1.1.3 |d|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced area corroded within 30cm of seatbelt anchor point. |7.1.1 |a| |i|| | 1 |
| Nearside Front Brake disc significantly and obviously worn overheated (1.1.14 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sil |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arb mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arb mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door sill (5.3.6 (a) (i)) | 1 |
| Offside Front Brake pipe leaking on a hydraulic braking system connection below master cylinder (1.1.11 (b) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rail (5.3.6 (a) (i)) | 1 |
| Offside Inner Front Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner sill / arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Centre Rear Braking system leaking |3.6.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis holed |6.1.1 |c| |i|| | 1 |
| Offside Front Anti-roll bar linkage ball joint excessively worn drop link |5.3.4 |a| |i|| | 1 |
| Offside Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Rear Suspension spring mounting prescribed area is excessively corroded both outer sill |2.4.A.3| | 1 |
| Nearside Rear Wheel nut|s| loose |4.2.A.1e| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded MAIN CHASSIS LEG |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded MAIN CHASSIS LEG |2.4.A.3| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/ arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Upper brake disc excessively pitted |3.5.1h| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch chassis leg |2.4.A.3| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s/f inner wing (5.3.6 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced o/s floor rail, under seat area (7.1.1 (a) (i)) | 1 |
| Nearside Side repeater has a product on the lens so it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Offside Side repeater has a product on the lens so it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Offside Front Steering locking device missing split pin on nut |2.2.C.1g| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel |2.4.A.3| | 1 |
| Nearside Rear Position lamp has a product on the lens or light source which significantly reduces light intensity |4.2.3 |b| |ii|| | 1 |
| Offside Rear Position lamp has a product on the lens or light source which significantly reduces light intensity |4.2.3 |b| |ii|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill/wheel arch |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill/wheel arch |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floorpan / inner sill |7.1.1 |a| |i|| | 1 |
| Offside Front Service brake lagging in operation |1.2.1 |d|| | 1 |
| Front Service brake excessively fluctuating both sides |1.2.1 |e|| | 1 |
| Emissions not tested smoke |7.3.A.1| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Chassis |6.1.B.2| | 1 |
| Nearside Front Outer Vehicle structure has excessive corrosion which adversely affects braking or steering Side of box section supporting n/s/f suspension |6.1.A.1| | 1 |
| Offside Front Outer Vehicle structure has excessive corrosion which adversely affects braking or steering section of chassis supporting o/s/f suspension |6.1.A.1| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced complete inner sill |6.1.1 |c| |i|| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill small hole |6.1.1 |c| |i|| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner & outer sill`s |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded INNER/OUTER SILL |5.2.6| | 1 |
| Offside Outer Body panel corroded and likely to cause injury sill |6.2.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded antiroll bar mounting |2.4.A.3| | 1 |
| Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Seat belt anchorage prescribed area is excessively corroded o/s and n/s outer sills |5.2.6| | 1 |
| Electronic stability control warning lamp indicates a fault (7.12 (e)) | 1 |
| Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Drivers airbag missing Steering Wheel (7.1.5 (a)) | 1 |
| Rear Direction indicator incorrect colour Both (4.4.3 (a)) | 1 |
| Horn not working button missing (7.7 (a)) | 1 |
| Exhaust has a major leak of exhaust gases underside (6.1.2 (a)) | 1 |
| Offside Rear Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Offside Front Suspension arm corroded and seriously weakened At shock mount (5.3.3 (b) (i)) | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Lower sill (7.1.1 (a) (i)) | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 1 |
| Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting subframe cross brace (6.2.2 (d) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded seat mounting |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded seat mounting |5.2.6| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at anti roll bar mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Shock absorbers has an excessively worn bush + slight fluid leak+lower mounting corroded (5.3.2 (c)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Sill panel |5.3.6 |a| |ii|| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Sill panel |5.3.6 |a| |ii|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Wheel arch near roll bar mounting |5.3.6 |a| |ii|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering holed and seriously weakened (6.1.1 (c) (ii)) | 1 |
| Offside Front Road wheel fixing loose loose wheel nut (5.2.1 (a) (i)) | 1 |
| Nearside Rear rear brake recording little or no effort hand brake |3.7.B.5a| | 1 |
| Offside Drivers airbag missing (7.1.5 (a)) | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill heavy corrosion |7.1.1 |a| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch where top control arm mounting point |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings drivers seat mounting point under car |6.1.B.2| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded bottom of wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded chassis leg |2.4.A.3| | 1 |
| Nearside Front Headlamps matched pair are not the same colour |1.7.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sill (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail at front roll bar mounting. |2.4.A.3| | 1 |
| Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt left and right hand gaiters deteriorated (2.1.3 (g) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail at roll bar mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Service brake excessively binding caliper (1.2.1 (f)) | 1 |
| Offside Front Seat belt anchorage prescribed area is inadequately repaired |7.1.1 |a| |i|| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill |7.1.1 |a| |i|| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced door sill look at wheel arch plastic covers over door sills |7.1.1 |a| |i|| | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Nearside Front Statutory seat belt missing |5.1.1| | 1 |
| brake disc excessively scored |3.5.1h| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion wing, |6.1.C.1| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded floor to sill |5.2.6| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill section, |5.2.6| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded floor to sill section, front to rear, |5.2.6| | 1 |
| Nearside Parking brake inoperative on one side 10kg effort (1.4.1 (a)) | 1 |
| Nearside Rear Anti-roll bar linkage has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill fill up with filler (7.1.1 (a) (i)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits 0.54 (8.2.1.2 (b)) | 1 |
| Nearside Front Bumper insecure (6.1.4 (a) (i)) | 1 |
| Offside Front Direction indicator not working (wing) (4.4.1 (a) (ii)) | 1 |
| Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded OUTER SILL |2.4.A.3| | 1 |
| Rear Exhaust has a major leak of exhaust gases tail pipe missing |7.1.2| | 1 |
| Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting BOTH SIDES CHASSIS LEGS (6.2.2 (d) (i)) | 1 |
| Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings REAR OF SILL AREA |6.1.B.2| | 1 |
| Central Floor excessively deteriorated both sides |6.2.4 |a| |i|| | 1 |
| Power steering malfunctioning BELT MISSING (2.1.5 (a)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak CENTRE TO CAT JOIN (8.2.1.1 (b)) | 1 |
| Nearside Steering locking device missing Track rod end . (2.1.3 (d)) | 1 |
| Offside Steering locking device missing Track rod end . (2.1.3 (d)) | 1 |
| Braking system leaking Front to rear brake pipe |3.6.A.1| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded Sill to floorpan |5.2.6| | 1 |
| Central Exhaust has a major leak of exhaust gases at rear joint (corroded) (6.1.2 (a)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded OUTER SILL PANEL |5.2.6| | 1 |
| Nearside Front Headlamp lens seriously defective |4.1.1 |b| |ii|| | 1 |
| Offside Front Headlamp lens seriously defective |4.1.1 |b| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength osf chassis (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nsf chassis (5.3.6 (a) (i)) | 1 |
| Nearside Side repeater not working lense missing |1.4.A.2c| | 1 |
| Nearside Rear Parking brake lever is not capable of being maintained in operation by direct mechanical action only parking brake |1.1.6 |f|| | 1 |
| Electrical wiring insecure under dash |1.9.2a| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sil (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis anti roll bar mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis anti roll bar mounting (5.3.6 (a) (i)) | 1 |
| Offside Front brake caliper securing device missing |3.5.1j| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis, next to roll bar bush mount (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor corroded (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor corroded (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill and outer sill (7.1.1 (a) (i)) | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch chassis area (5.3.6 (a) (i)) | 1 |
| Offside Rear Body component corroded and likely to cause injury WING (6.2.1 (a) (i)) | 1 |
| Windscreen wiper not working |3.4 |a|| | 1 |
| Rear Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |
| Nearside Rear Undertray likely to become detached (6.2.1 (a) (ii)) | 1 |
| Nearside Rear Sub-frame attachment bracket/mounting insecure 2 bolts are loose |2.4.G.1| | 1 |
| Steering locking device missing BOTH UPPER FRONT BALL JOINTS,,,SPLIT PINS MISSING.... (2.1.3 (d)) | 1 |
| Suspension component mounting prescribed area is inadequately repaired o/s/r outer sill welded, not a continuous weld. (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill panel |5.2.6| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer`s specified limits 0.69% |8.2.1.2 |a|| | 1 |
| Headlamp aim projected beam image is obviously incorrect Both (deteriorated), cleaned (4.1.2 (c)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Offside Rear Braking system leaking caliper handbrake lever |3.6.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength NDER SILL (5.3.6 (a) (i)) | 1 |
| Nearside Side repeater excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Exhaust has a major leak of exhaust gases Centre to rear exhaust joint corroded |7.1.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Front Power steering inoperative and steering adversely affected (2.1.5 (c) (ii)) | 1 |
| Front Brake hydraulic reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
| Front Power steering pipe/hose excessively corroded (2.1.5 (g) (i)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch (marked) (6.2.2 (d) (i)) | 1 |
| Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (marked) (6.2.2 (d) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (marked) (6.2.2 (d) (i)) | 1 |
| Emissions not tested co2 high (8.2.1.2 (d)) | 1 |
| Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor x4 (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor holed as marked under seat (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill as marked (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength as marked under bonnet in front of strut mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded wing |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner wing |2.4.A.3| | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect headlight lens (4.1.2 (c)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top mount (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top mount (5.3.6 (a) (i)) | 1 |
| Rear Exhaust system insecure box (6.1.2 (a)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded near rad visible from underneath car |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Brake performance not tested Brake pipe leaking (1.2.1 (g)) | 1 |
| Rear Service brake excessively fluctuating BOTH REAR BRAKES. ( REQS DISCS.) (1.2.1 (e)) | 1 |
| All direction indicators incorrect colour Both fronts (4.4.3 (a)) | 1 |
| Nearside Outer Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 1 |
| Suspension arm ball joint likely to become detached Both front lower Bolts to short (5.3.4 (a) (ii)) | 1 |
| Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction Top screen stickers (3.1 (a) (ii)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced arch |7.1.1 |a| |i|| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor to sill |6.1.B.2| | 1 |
| Nearside Front Headlamp has a product on the lens so that the light output is severely reduced |4.1.4 |b|| | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Offside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
| Offside Front Lower Suspension component ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Front Drag link end modification unsafe has been cut half way through (2.1.3 (f) (i)) | 1 |
| Rear Service brake effort inadequate at a wheel both (1.2.1 (a) (i)) | 1 |
| Exhaust carbon monoxide content at idle exceeds default limits Also emitting visible white smoke (8.2.1.2 (b)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Can be seen behind road wheel |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Can be seen behind road wheel |5.3.6 |a| |i|| | 1 |
| Offside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Nearside Front Anti-roll bar pin or bush likely to become detached |5.3.4 |a| |ii|| | 1 |
| Brake performance not tested Brake pipe burst (1.2.1 (g)) | 1 |
| Brake pipe leaking on a hydraulic braking system Front to rear pipe split (1.1.11 (b) (ii)) | 1 |
| Offside Front Suspension arm corroded and seriously weakened Shock absorber attachment bracket (5.3.3 (b) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded Outer sill within |5.2.6| | 1 |
| Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Headlamp aim beam image obviously incorrect no beam image pattern |1.8.A.1b| | 1 |
| Nearside Front Upper Anti-roll bar ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
| Offside Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings seal |6.1.B.2| | 1 |
| Nearside Rear wheel cylinder has restricted free movement |3.5.1k| | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 1 |
| Inner Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt w/bone (5.3.4 (b) (ii)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill excessive corrosion (7.1.1 (a) (i)) | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner cill chassie |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer cill holed |5.2.6| | 1 |
| Rear fog lamp tell tale missing |1.3.1b| | 1 |
| Offside Rear Upper Anti-roll bar ball joint dust cover missing (5.3.4 (b) (ii)) | 1 |
| Nearside Front Anti-roll bar corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Front Anti-roll bar corroded and seriously weakened |2.4.G.1| | 1 |
| Power steering pump leaking from a failed joint |2.3.3b| | 1 |
| Nearside Front Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) | 1 |
| Nearside Front Steering component mounting prescribed area is inadequately repaired (2.1.2 (e) (i)) | 1 |
| Offside Front Steering component mounting prescribed area is inadequately repaired (2.1.2 (e) (i)) | 1 |
| Windscreen excessively tinted and visibility through swept area of windscreen seriously affected (3.2 (b) (ii)) | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 1 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i)) | 1 |
| Central Exhaust has a major leak of exhaust gases silencer |6.1.2 |a|| | 1 |
| Nearside Rear Suspension component attachment bracket/mounting insecure and impairing directional stability stablizer bar |5.3.3 |a| |ii|| | 1 |
| Nearside Front Upper Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Offside Front Upper Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Nearside Headlamp aim beam image obviously incorrect Product on lens |1.8.A.1b| | 1 |
| Offside Headlamp aim beam image obviously incorrect Product on lens |1.8.A.1b| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill excessively corroded (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner and outer sill corroded away |5.2.6| | 1 |
| Nearside Floor excessively deteriorated floor pan holed (6.2.4 (a) (i)) | 1 |
| Offside Floor excessively deteriorated floor pan holed (6.2.4 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wingwheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wingwheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner wheel arch corroded. |6.2.2 |d| |i|| | 1 |
| Offside An item not tested |Manual| | 1 |
| Emissions not tested overheating |7.3.A.1| | 1 |
| Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and outer sills (6.2.2 (d) (i)) | 1 |
| Rear Exhaust has a major leak of exhaust gases broken (6.1.2 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch at subframe area (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Anti-roll bar linkage insecure Broken |2.4.G.1| | 1 |
| Bonnet cannot be secured in the closed position |8.4.1| | 1 |
| Nearside Front Side repeater not working Wing repeater |1.4.A.2c| | 1 |
| Nearside Rear brake caliper leaking No brake test carried out due to leak |3.6.A.1| | 1 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid caliper leaking fluid |1.1.16 |b| |i|| | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail (6.1.1 (c) (i)) | 1 |
| Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits (Due to exhaust leak) (8.2.1.2 (c)) | 1 |
| Exhaust has a major leak of exhaust gases Flange on Rear box (6.1.2 (a)) | 1 |
| Nearside Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
| Emissions unable to be completed car cut out and wouldnt restart (8.2.1.2 (d)) | 1 |
| Offside Side repeater light intensity significantly reduced (4.4.3 (a)) | 1 |
| Exhaust has a major leak of exhaust gases Penultimate section |7.1.2| | 1 |
| Main beam `tell-tale` not working on dash. but main beams work |1.7.4c| | 1 |
| Offside Seat belt anchorage prescribed area is severely distorted floor |5.2.6| | 1 |
| Front Anti-roll bar missing |2.4.G.1| | 1 |
| Offside Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Brake pipe leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting insecure |5.3.3 |a| |i|| | 1 |
| Nearside Rear Brake disc significantly and obviously worn and corroded |1.1.14 |a| |i|| | 1 |
| Offside Rear Brake disc significantly and obviously worn and corroded |1.1.14 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is fractured |2.4.A.3| | 1 |
| Offside Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
| Driver`s view of the road through the swept area of the windscreen materially affected by an obstruction stickers across screen |3.1 |a| |ii|| | 1 |
| Offside Floor excessively deteriorated inner sill/floor |6.2.4 |a| |i|| | 1 |
| Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded body sill |2.4.A.3| | 1 |
| Nearside Front Hydraulic fluid leaking excessively Caliper (8.4.1 (a) (i)) | 1 |
| Power steering component modification unsafe Pump removed (2.1.5 (f) (i)) | 1 |
| Offside Front Anti-roll bar ball joint likely to become detached Broken |5.3.4 |a| |ii|| | 1 |
| Nearside Rear reflector defective or damaged by more than 50% of the reflecting surface Product on the lens |4.8.1 |a| |ii|| | 1 |
| Offside Rear reflector defective or damaged by more than 50% of the reflecting surface Product on the lens |4.8.1 |a| |ii|| | 1 |
| Nearside Front Brake hose excessively stretched On full lock |1.1.12 |b| |ii|| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded rear part |5.2.6| | 1 |
| Nearside Front Position lamp not working sidelight (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 1 |
| Offside Rear Anti-roll bar ball joint likely to become detached detatched (5.3.4 (a) (ii)) | 1 |
| Emissions unable to be completed Aborted due to water pump drive belt breaking (8.2.1.2 (d)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer cill |7.1.1 |a| |i|| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Offside Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced inner sills/ floor pan, N/S & O/S (7.1.1 (a) (i)) | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill corroded |5.2.6| | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded sill corroded |5.2.6| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under chassis leg |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill within 30cm of seat mounting |5.2.6| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced body corrosion within 30cm of the lower seat belt anchorage (7.1.1 (a) (i)) | 1 |
| Emissions unable to be completed Excessive co reading (8.2.1.2 (d)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced excessively corroded |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced excessively corroded |7.1.1 |a| |i|| | 1 |
| Offside Rear Battery insecure and likely to fall from carrier Mounting area is severally corroded, risk of batter falling out. (4.13 (a) (ii)) | 1 |
| Offside Rear Brake pipe seriously damaged |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Nearside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Brake hose connection leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 1 |
| Nearside Front Side repeater insecure |1.4.A.2b| | 1 |
| Offside Front Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner wheel arch area marked in yellow (6.2.2 (d) (ii)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer cill marked in yellow (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer cill marked in yellow (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg at anti roll bar mounting |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg at anti roll bar mounting |5.3.6 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired sill, corroded and holed around edge of repair |7.1.1 |a| |i|| | 1 |
| Nearside Front Front position lamp|s| flickers when tapped lightly by hand |1.1.4c| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Drivers seat |5.2.6| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheel arch (6.1.1 (c) (ii)) | 1 |
| Offside Rear Inner Brake lining|s| less than 1.5 mm thick |3.5.1g| | 1 |
| Offside Rear Hydraulic brake calliper damaged (1.1.16 (a) (i)) | 1 |
| Nearside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Outter sil corroded (5.3.6 (a) (ii)) | 1 |
| Exhaust catalytic converter obviously modified (8.2.1.1 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg/rail (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength boot floor (5.3.6 (a) (i)) | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to floor |6.1.B.2| | 1 |
| Emissions not tested cannot hold revs/cuts out (8.2.1.2 (d)) | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired outer sill |2.4.A.3| | 1 |
| Rear Exhaust system not adequately supported silencer mount broken |7.1.1| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill corrosion hole |5.2.6| | 1 |
| Nearside Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak slight leak from center join, could be why the lambda reading is high (8.2.1.1 (b)) | 1 |
| Nearside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Emissions unable to be completed due to exhaust blow (8.2.1.2 (d)) | 1 |
| Offside Front Seat belt webbing significantly weakened |7.1.2 |b| |ii|| | 1 |
| Nearside Front Brake disc significantly and obviously worn inner surface |1.1.14 |a| |i|| | 1 |
| Offside Front Brake disc significantly and obviously worn inner surface |1.1.14 |a| |i|| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill holed |5.3.6 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Lower seat belt mount |rear inner sill| |5.2.6| | 1 |
| Rear Lower Braking system leaking |3.6.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill in two places (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i)) | 1 |
| Offside Integral body structure inadequately repaired such that structural rigidity is significantly reduced Inner sill (6.1.1 (d) (i)) | 1 |
| Nearside Integral body structure inadequately repaired such that structural rigidity is significantly reduced Inner sill (6.1.1 (d) (i)) | 1 |
| Nearside Rear Anti-roll bar linkage insecure detatched |2.4.G.1| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis to inner wing |5.3.6 |a| |i|| | 1 |
| Exhaust emissions carbon monoxide content at idle excessive not checked |7.3.D.4| | 1 |
| Offside Front Power steering component|s| leaking from a failed joint |2.3.3b| | 1 |
| Nearside Front Front suspension locking device missing |2.5.A.4| | 1 |
| Nearside Front Front suspension retaining device ineffective |2.5.A.4| | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint by rack |2.3.3b| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s inner and outer sill area (6.1.1 (c) (i)) | 1 |
| Fuel pipe leaking at fuel filter |7.2.3| | 1 |
| Exhaust emissions carbon monoxide content at idle excessive idling too low..650/750rpm 0.69 |7.3.D.4| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive 1.312/1.034 |7.3.D.3| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill corroded (6.2.2 (d) (ii)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired chassis corroded (6.2.2 (d) (ii)) | 1 |
| Offside Floor excessively deteriorated |6.2.4 |a| |i|| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive 0.44% max .2 |7.3.D.3| | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounts /axle mountings ,antiroll bar mounts front section of chassis rails and inner wheel arch (5.3.6 (a) (i)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen both |4.1.2 |a|| | 1 |
| Nearside Front Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Offside Front Braking system leaking flexi |3.6.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area is severely distorted boot floor |2.4.A.3| | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect no clear beam pattern (4.1.2 (c)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect no clear beam pattern (4.1.2 (c)) | 1 |
| Central Exhaust has a major leak of exhaust gases to rear of bolt in catalytic converter (6.1.2 (a)) | 1 |
| Drivers view of the road through the swept area of the windscreen materially affected by an obstruction Sunstrip (3.1 (a) (ii)) | 1 |
| Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
| Headlamp aim not tested Both (4.1.2 (b)) | 1 |
| Power steering pump drive system missing |2.3.6| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits 0.64 , limit 0.20. (8.2.1.2 (b)) | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect headlight cover (4.1.2 (c)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced offside rear sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor / end chassis leg |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner/ floor area |5.3.6 |a| |i|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to subframe and anti-roll bar mounting |5.3.6 |a| |i|| | 1 |
| Offside Rear brake caliper leaking Through hand brake lever |3.6.A.1| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced in wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced in wheel arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced under sill to arch (6.1.1 (c) (i)) | 1 |
| Position lamp not working NEARSIDE FRONT SIDE LIGHT INOP |4.2.1 |a|| | 1 |
| Offside Rear Braking system leaking Brake caliper |3.6.A.1| | 1 |
| Offside Parking |secondary brake| on a single line braking system has no recorded effort at a wheel |1.3.1 |a| |ii|| | 1 |
| Nearside Front Headlamp levelling device inoperative |4.1.5 |a|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outersill |7.1.1 |a| |i|| | 1 |
| Emissions not tested due to aux belt snapped |7.4.B.1| | 1 |
| Nearside Front Hydraulic brake calliper leaking |1.1.16 |b| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill is badly corroded and has a big hole in it (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill is badly corroded and has a big hole in it (5.3.6 (a) (i)) | 1 |
| Emissions not tested gas analyser couldnt detect any smoke from back of exhaust due to blow (8.2.1.2 (d)) | 1 |
| Offside Brake pipe leaking on a hydraulic braking system front too rear |1.1.11 |b| |ii|| | 1 |
| Offside Inner Floor excessively deteriorated sill/floor |6.2.4 |a| |i|| | 1 |
| Nearside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Offside Rear Inner Road wheel badly distorted buckled (5.2.2 (c) (i)) | 1 |
| Nearside Rear Inner Road wheel badly distorted buckled (5.2.2 (c) (i)) | 1 |
| Nearside Outer Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Outer Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Shock absorber has an excessively worn bush lower bush debonded |2.7.4| | 1 |
| Rear Anti-roll bar linkage fractured both (5.3.3 (b) (ii)) | 1 |
| Front Service brake excessively fluctuating both (1.2.1 (e)) | 1 |
| Offside Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced chassis rail |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced chassis rail |7.1.1 |a| |i|| | 1 |
| Offside Rear Anti-roll bar linkage damaged and seriously weakened |5.3.3 |b| |i|| | 1 |
| Front Headlamp has a product on the lens so that the light output is severely reduced both |4.1.4 |b|| | 1 |
| Offside Service brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Front Anti-lock braking system component inappropriately modified |3.4.4| | 1 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits 2 high |7.3.D.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mounitng (5.3.6 (a) (i)) | 1 |
| Offside Front Headlamp not working on dipped beam adjusted (4.1.1 (a) (ii)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer seal |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer seal |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected outer seal |5.3.6 |a| |ii|| | 1 |
| Emissions not tested due to engine over heating |7.3.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasis (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing[subframe area] (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded in arch |2.4.A.3| | 1 |
| Rear Brake performance not tested |3.7.A.1| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor section holed |7.1.1 |a| |i|| | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill both sides (6.2.2 (d) (i)) | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced both sides (6.1.1 (c) (i)) | 1 |
| Battery insecure and likely to fall from carrier battrey tray corroded (4.13 (a) (ii)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting OFFSIDE INNER SILL AREA/FLOOR AREA (6.2.2 (d) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting NEARSIDE INNER SILL AREA/FLOOR AREA (6.2.2 (d) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sil rear end. (7.1.1 (a) (i)) | 1 |
| Nearside Front position lamp|s| insecure |1.1.A.3a| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Inner cill |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Inner cill |5.2.6| | 1 |
| Stop lamp not working both |1.2.1b| | 1 |
| Offside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Central Inner Sill (6.2.2 (d) (i)) | 1 |
| Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner Sill (6.2.2 (d) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Near and Offside sills (7.1.1 (a) (i)) | 1 |
| Nearside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front of spring (5.3.6 (a) (i)) | 1 |
| Front Lower Power steering pipe/hose leaking (2.1.5 (a)) | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front of inner arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under sill (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch chassie leg (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Under arch |2.4.A.3| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill has holed |7.1.1 |a| |i|| | 1 |
| Drive belt so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Reversing lamp inoperative |4.6.1 |a|| | 1 |
| Nearside Front Power steering component leaking (2.1.5 (a)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch/chassis leg (6.1.1 (c) (i)) | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting fractured |5.3.3 |b| |ii|| | 1 |
| Emissions not tested Back box mising |8.2.1.2 |d|| | 1 |
| Exhaust has a major leak of exhaust gases joints (6.1.2 (a)) | 1 |
| Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i)) | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill at rear |5.2.6| | 1 |
| Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
| Braking system leaking front to rear brake pipe split during brake check . |3.6.A.1| | 1 |
| Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Rear Direction indicators not working |1.4.A.2c| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis holed |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering corroded holled (6.1.1 (c) (ii)) | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering corroded holled (6.1.1 (c) (ii)) | 1 |
| Nearside Front Brake hose damaged and likely to fail (1.1.12 (a)) | 1 |
| Fuel cap/sealing device ineffective cant open filler cover (6.1.3 (b) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area (5.3.6 (a) (i)) | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting corroded and seriously weakened chassis rail (5.3.3 (b) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner & outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill corroded |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sill correded |5.2.6| | 1 |
| Nearside Front Lower Anti-roll bar linkage corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Front Lower Anti-roll bar linkage corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Front Lower Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Nearside Front Headlamp aim beam image obviously incorrect Bulb not seated in holder. |1.8.A.1b| | 1 |
| Offside Front Wheel stud|s| missing |4.2.A.1e| | 1 |
| Nearside Front Headlamp aim beam image obviously incorrect Bulb incorrectly fitted |1.8.A.1b| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak cat |8.2.1.1 |b|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Inner arch |5.3.6 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Coil spring fractured or broken top coil broken (5.3.1 (b) (i)) | 1 |
| Offside Rear Coil spring worn so that its cross sectional area is reduced and seriously weakened lower coil broken (5.3.1 (b) (i)) | 1 |
| Nearside Rear Coil spring fractured or broken coil is broken |5.3.1 |b| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering within 30 cm |6.1.1 |c| |ii|| | 1 |
| Nearside Front Fluid leak harmful to the environment or a risk to other road users radiator clip corroded anti freeze is leaking |8.4.1 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded on outer sill within 30 cm of A anchor point |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded on outer sill within 30 cm of A anchor point |5.2.6| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering on outer sill |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering on outer sill |6.1.A.1| | 1 |
| Offside Front Suspension arm pin or bush excessively worn rear lower arm pin worn causing excessive play in hub (5.3.4 (a) (i)) | 1 |
| Nearside Front Front suspension has a suspension upper ball joint securing nut not locked |2.5.B.1a| | 1 |
| Nearside Front Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a| | 1 |
| Front Direction indicators incorrect colour |1.4.A.2f| | 1 |
| Nearside Front Lower Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Floorpan |5.2.6| | 1 |
| Rear Lower Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Nearside Front Electrical wiring insecure |1.9.2a| | 1 |
| Nearside Rear Braking system leaking caliper |1.1.3 |d|| | 1 |
| Rear Axle modified so that axle functionality is affected |5.1.1 |c| |ii|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch on chassis |5.3.6 |a| |i|| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits 0.420 %vol. |8.2.1.2 |b|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill in 2 places |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill/floor |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill/floor |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded chassis /floor on pipe clips |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded chassis /floor on pipe clips |5.2.6| | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting insecure broke away from chassis |2.4.G.1| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive 0.460%vol. |7.3.D.3| | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced snapped out off body |2.4.G.1| | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced mounting points badly corroded through |2.4.G.1| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail/inner arch area (5.3.6 (a) (i)) | 1 |
| Front Brake hydraulic reservoir leaking hydraulic fluid |3.6.A.1| | 1 |
| Offside Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outter |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded 0utter |5.2.6| | 1 |
| Brake performance not tested no pedal (1.2.1 (g)) | 1 |
| Brake pipe connection leaking on a hydraulic braking system center (1.1.11 (b) (ii)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced middle of car (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i)) | 1 |
| Nearside Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
| Nearside Front Side repeater has less than 50% of the light sources illuminating |1.4.A.2c| | 1 |
| Offside Front Side repeater has less than 50% of the light sources illuminating |1.4.A.2c| | 1 |
| Centre Rear Stop lamp has less than 50% of the light sources illuminating |1.2.1b| | 1 |
| Nearside Rear Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 1 |
| Offside Headlamp not working on dipped beam Bad earth connection (4.1.1 (a) (ii)) | 1 |
| Offside Headlamp not working on main beam Bad earth connection (4.1.1 (a) (ii)) | 1 |
| Emissions not tested Due to serious exhaust leak (8.2.1.2 (d)) | 1 |
| Offside Front Service brake grabbing severely |1.2.1 |c|| | 1 |
| Offside Side repeater incorrect colour lamp broken |1.4.A.2f| | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s inner sill holed (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear of sill holed (6.2.2 (d) (i)) | 1 |
| Nearside Rear Body panel corroded and likely to cause injury arch corroded with sharp edges (6.2.1 (a) (i)) | 1 |
| Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s inner sill holed (6.1.1 (c) (i)) | 1 |
| Headlamp levelling device inoperative both (4.1.5 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail areas (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail areas (5.3.6 (a) (i)) | 1 |
| Nearside Rear Anti-roll bar ball joint excessively worn also rubber boot spilt (5.3.4 (a) (i)) | 1 |
| Nearside Rear Outer Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced sill (6.1.1 (b) (ii)) | 1 |
| Rear Battery insecure |1.9.1| | 1 |
| Offside Rear Braking system leaking flexi hose to brake pipe union |3.6.A.1| | 1 |
| Rear Exhaust emissions likely to be affected by an exhaust leak joint (8.2.2.1 (b)) | 1 |
| Offside Front Bumper insecure (6.1.4 (a) (i)) | 1 |
| Nearside Windscreen wiper blade missing |8.2.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded heavily corroded forward of subframe, under side, inner side and top towards headlight |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded heavily corroded forward of subframe, under side, inner side and out side |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie around subframe and anti roll bar mounts both sides (5.3.6 (a) (i)) | 1 |
| Offside Rear Braking system leaking brake caliper leaking |3.6.A.1| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded rear sill |5.2.6| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive 0.61 @2500rpm |7.3.D.3| | 1 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits 1.043 @ 2500rpm |7.3.D.3| | 1 |
| Front Service brake excessively binding front both n/s o/s brakes binding (1.2.1 (f)) | 1 |
| Front Outer Headlamp has a product on the lens so that the light output is severely reduced front both n/s o/s outer head light lens misty (4.1.4 (b)) | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced n/s rear outer lower sill corroded (6.1.1 (c) (i)) | 1 |
| Front Headlamp has a product on the lens so that the light output is severely reduced both n/s o/s |4.1.4 |b|| | 1 |
| Seat belt anchorage prescribed area is excessively corroded o/s/f sill to floor area |5.2.6| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under wheel arch |5.3.6 |a| |i|| | 1 |
| Emissions not tested due to poor running [ missfire ]. |7.3.A.1| | 1 |
| Nearside Front Inner Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) | 1 |
| Nearside Rear Inner Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) | 1 |
| Offside Front Inner Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) | 1 |
| Offside Rear Inner Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) | 1 |
| Nearside Front Upper Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
| Offside Outer Seat belt anchorage prescribed area is inadequately repaired (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected subframe mount |5.3.6 |a| |ii|| | 1 |
| Emissions unable to be completed excessive blow from rear section (8.2.1.2 (d)) | 1 |
| Power steering pipe/hose leaking high pressure pipe leaking fluid (2.1.5 (a)) | 1 |
| Brake performance not tested Excessive brake fluid leak from corroded pipe (1.2.1 (g)) | 1 |
| Brake pipe leaking on a hydraulic braking system Front to rear (1.1.11 (b) (ii)) | 1 |
| Offside Front Position lamp not working side light bulb 501 (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii)) | 1 |
| Offside Front Steering locking device missing (2.1.3 (d)) | 1 |
| Headlamps matched pair incorrect colour |4.1.4 |a|| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced battery tray |6.1.1 |c| |i|| | 1 |
| Hydraulic fluid leaking excessively power steering (8.4.1 (a) (i)) | 1 |
| Emissions unable to be completed severe exhaust leak (8.2.1.2 (d)) | 1 |
| Rear Exhaust has a major leak of exhaust gases at flange / joint (6.1.2 (a)) | 1 |
| Rear Exhaust has a major leak of exhaust gases silencer joint (6.1.2 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing / chassis near to suspension component mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/chassis near suspension component mounting (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected wing to chassis (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired wing to sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill to chassis (5.3.6 (a) (i)) | 1 |
| brake disc in such a condition that it is seriously weakened o/s rear |3.5.1i| | 1 |
| brake disc in such a condition that it is seriously weakened n/s rear |3.5.1i| | 1 |
| Power steering pipe/hose leaking lower rack pipe |2.1.5 |a|| | 1 |
| Offside Rear Anti-roll bar linkage fractured drop link |5.3.3 |b| |ii|| | 1 |
| Exhaust catalytic converter obviously modified empty and clearly see where was welded up |8.2.1.1 |a|| | 1 |
| Hazard warning switch faulty intermittent problem |1.4.B.1d| | 1 |
| Hazard warning switch faulty intermittent dont work then work |1.4.B.1d| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill/ floor (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Central outer floor |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Central outer floor |5.2.6| | 1 |
| Hydraulic fluid leaking excessively power steering pipes|front of engine bay| |8.4.1 |a| |i|| | 1 |
| Rear Exhaust has a major leak of exhaust gases silencer holed and blowing (6.1.2 (a)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill areas (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill areas |7.1.1 |a| |i|| | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits LAMBDA HIGHT AND ENGINE TEMP CLOSE TO OVERHEATING |8.2.1.2 |c|| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL HOLED |7.1.1 |a| |i|| | 1 |
| Rear rear brake excessively fluctuating |3.7.B.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill area marked in yellow |5.2.6| | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill`s (7.1.1 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch by the top suspension arm (5.3.6 (a) (i)) | 1 |
| Emissions not tested Due to radiator leaking (8.2.1.2 (d)) | 1 |
| Offside Seat belt anchorage prescribed area is deliberately modified which significantly reduces the original strength sill paNEL |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded INNER SILL |5.2.6| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded wing within the |2.4.A.3| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor under car within the |5.2.6| | 1 |
| Emissions not tested due to condition of exhaust |7.3.A.1| | 1 |
| Nearside brake disc excessively scored |3.5.1h| | 1 |
| Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded INNER FRONT WING PANEL |2.4.A.3| | 1 |
| Nearside Front Headlamp lens seriously defective Cloudy (4.1.1 (b) (ii)) | 1 |
| Offside Front Headlamp lens seriously defective Cloudy (4.1.1 (b) (ii)) | 1 |
| Nearside Rear Exhaust has a major leak of exhaust gases Centre box to back box bracket broken (6.1.2 (a)) | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill at rear |6.1.B.2| | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Nearside Rear Outer Sill Corroded And Holed |7.1.1 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Offside Front Outer Sill Corroded And Holed |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis Arm |5.3.6 |a| |i|| | 1 |
| Central Front Parking brake lever has excessive movement indicating incorrect adjustment hand brake lever (1.1.6 (c)) | 1 |
| Offside Rear Outer Integral body structure is fractured and structural rigidity is significantly reduced seal corroded through (6.1.1 (a) (i)) | 1 |
| Nearside Rear Road wheel fixing missing stud snapped (5.2.1 (a) (i)) | 1 |
| Offside Front Headlamp aim beam image too far to the right |1.6.B4| | 1 |
| Centre Exhaust has a major leak of exhaust gases exhaust join |7.1.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Hydraulic brake calliper leaking o/s/r caliper leaking |1.1.16 |b| |i|| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded chassis, inner wheel arch |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis near lower arm mounting |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis near lower arm mounting |2.4.A.3| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced offside rear outer sill (6.1.1 (c) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases joint |6.1.2 |a|| | 1 |
| Front Main beam tell-tale not working |4.9.1 |a| |ii|| | 1 |
| Nearside Rear Sub-frame strengthening plate or fastening insecure BOLT MISSING ON SUSPENSION BRACE (6.1.1 (b) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis Holed |6.1.1 |c| |i|| | 1 |
| Emissions not tested Due to engine coolant leak and over heating whilst carrying out second fast idle test (8.2.1.2 (d)) | 1 |
| Rear Exhaust has a major leak of exhaust gases Corroded flange joint (6.1.2 (a)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded front seat mount
|5.2.6| | 1 |
| Nearside Rear Lower Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Offside Rear Subframe mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded both outer seals |5.2.6| | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced N/S O/S (6.1.1 (c) (i)) | 1 |
| Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction sunvisor removed (3.1 (a) (ii)) | 1 |
| Offside Rear Position lamp not working 580 bulb (4.2.1 (a) (ii)) | 1 |
| Offside Front Lower Suspension arm ball joint excessively worn outer ball joint (5.3.4 (a) (i)) | 1 |
| Emissions not tested engine miss fire |8.2.1.2 |d|| | 1 |
| Offside Front Anti-roll bar linkage damaged and seriously weakened |2.4.G.1| | 1 |
| Offside Front Headlamp aim so that beam "kick up" is not visible on the screen Bulb fitted incorrectly |4.1.2 |a|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced rear jacking point |7.1.1 |a| |i|| | 1 |
| Rear Brake valve leaking |1.1.7 |d| |i|| | 1 |
| Headlamp has a product on the lens so that the light output is severely reduced both (4.1.4 (b)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wing/chassis leg corroded and holed |5.3.6 |a| |ii|| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded and holed |7.1.1 |a| |i|| | 1 |
| Emissions not tested due to exhaust major leak of gasses |8.2.1.2 |d|| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak centre pipe |8.2.1.1 |b|| | 1 |
| Exhaust has a major leak of exhaust gases centre pipe |6.1.2 |a|| | 1 |
| Front Inner Brake disc significantly and obviously worn faces (1.1.14 (a) (i)) | 1 |
| Central Exhaust has a major leak of exhaust gases cat (6.1.2 (a)) | 1 |
| Exhaust has a major leak of exhaust gases cat (6.1.2 (a)) | 1 |
| Nearside Rear Anti-roll bar ball joint excessively worn loose (5.3.4 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Chassis inner wing panel | anti roll bar | |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis | inner wing | |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor under seat to inner sill |5.2.6| | 1 |
| Emissions unable to be completed due to exhaust leaking (8.2.2.2 (e)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded wheel arch |5.2.6| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced OS inner and outer sill (6.1.1 (c) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced OSF chassis rail (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill |6.1.1 |c| |i|| | 1 |
| Parking (secondary brake) on a single line braking system has no recorded effort at a wheel both sides (1.3.1 (a) (ii)) | 1 |
| Nearside Rear Anti-roll bar linkage likely to become detached drop link lose (5.3.3 (a) (ii)) | 1 |
| Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corroded and hole within 30cm of chassis (6.1.1 (c) (i)) | 1 |
| Steering wheel weakened by modification |2.1.1| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 1 |
| Centre Exhaust has a major leak of exhaust gases section |7.1.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheel arch |6.1.1 |c| |ii|| | 1 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition exhaust silencer missing |7.1.4| | 1 |
| Central Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` hanging from mirror |8.3.1e| | 1 |
| Nearside Side repeater has less than 50% of the light sources illuminating |1.4.A.2c| | 1 |
| Offside Side repeater has less than 50% of the light sources illuminating |1.4.A.2c| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced to rear of the wheel marked yellow |6.1.1 |c| |i|| | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength seen under wheel arch
marked yellow |5.3.6 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill marked with yellow |5.2.6| | 1 |
| Offside Front Wheel bolt|s| missing |4.2.A.1e| | 1 |
| Nearside Rear brake caliper locking device insecure |3.5.1l| | 1 |
| Nearside Outer Rear Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Brake pedal not releasing correctly and functionality of brakes affected pedal to the floor (1.1.2 (b) (ii)) | 1 |
| Offside Rear Rear reflector not red in colour |1.5.1d| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Outer Sill Panel |5.2.6| | 1 |
| Rear Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Centre Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis Leg (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis Leg (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Outer Sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassie |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing/chassis |2.4.A.3| | 1 |
| Front Valve stem seriously damaged n/s+o/s |4.1.D.1e| | 1 |
| Offside Body has a projection caused by damage |6.1.C.1| | 1 |
| Parking brake lever ratchet mechanism is broken |3.1.5| | 1 |
| Central Rear Exhaust has a major leak of exhaust gases joint to rear silencer blowing |6.1.2 |a|| | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect and lens deteriorated (4.1.2 (c)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect and lens deteriorated (4.1.2 (c)) | 1 |
| Front Brake pedal spongy |3.3.B.1b| | 1 |
| Nearside Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced seat fixing to floorpan (7.1.1 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases joint between centre and rear sections |7.1.2| | 1 |
| Exhaust has a major leak of exhaust gases middl;e to rear join (6.1.2 (a)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded inner sill x2 as marked |5.2.6| | 1 |
| Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting BOTH OUTER SIDE SILLS (6.2.2 (d) (i)) | 1 |
| Rear Exhaust system insecure EXHAUST BOX HANGER (6.1.2 (a)) | 1 |
| Rear Exhaust has a major leak of exhaust gases BOX (6.1.2 (a)) | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill panel |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outer sill panel |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chasis. (5.3.6 (a) (i)) | 1 |
| Horn not a continuous or uniform sound Air horn fitted |1.6.2e| | 1 |
| Offside Braking system leaking |3.6.A.1| | 1 |
| Offside Inner Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Outer Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded outer sill at rear |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded outer sill at rear |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage likely to become detached in the event of a collision |7.1.1 |a| |ii|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar / chassis |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti rollbar / chassis |5.3.6 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases at centre silencer joint |7.1.2| | 1 |
| Nearside Rear rear brake recording little or no effort handbrake |3.7.B.5a| | 1 |
| Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill / floor |6.2.2 |d| |i|| | 1 |
| Offside Rear Body panel corroded and likely to cause injury wheel arch |6.2.1 |a| |i|| | 1 |
| Nearside Front Road wheel badly distorted |5.2.2 |c| |i|| | 1 |
| Nearside Rear Road wheel badly distorted |5.2.2 |c| |i|| | 1 |
| Offside Rear Road wheel badly distorted |5.2.2 |c| |i|| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded and inner sill |5.2.6| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced also sill box end (6.1.1 (c) (i)) | 1 |
| Front Service brake excessively binding both sides (1.2.1 (f)) | 1 |
| Offside Front Lower Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis inner wing area (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor/sill join area (7.1.1 (a) (i)) | 1 |
| Offside Rear Service brake application uneven across the axle |3.7.D.2b| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner door dill |5.2.6| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis leg |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Chassis leg |6.1.A.1| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced badly holed with in 30 cm of coil spring mounting |6.1.1 |c| |i|| | 1 |
| Nearside Steering rack deformed and unserviceable |2.2.C.1d| | 1 |
| Nearside Front Headlamp lens seriously defective dull (4.1.1 (b) (ii)) | 1 |
| Offside Front Headlamp lens seriously defective dull (4.1.1 (b) (ii)) | 1 |
| Front Power steering component leaking (2.1.5 (a)) | 1 |
| Offside Brake pipe leaking Front to rear |3.6.A.1| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Inner wing |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Inner wing |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired Inner wing |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired Inner wing |2.4.A.3| | 1 |
| Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Brake pipe at imminent risk of failure or fracture (1.1.11 (a)) | 1 |
| Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides (5.3.6 (a) (i)) | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outer sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Brake pipe leaking along chassis leg |3.6.A.1| | 1 |
| Service brake is causing the vehicle to swerve to the nearside |3.7.C.2| | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Tie bar/rod has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Central Rear Exhaust emissions likely to be affected by an exhaust leak |8.2.1.1 |b|| | 1 |
| Offside Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
| Central Exhaust emissions likely to be affected by an exhaust leak detached (8.2.1.1 (b)) | 1 |
| Brake performance unable to be tested car too low (1.2.1 (g)) | 1 |
| Emissions unable to be completed due too exhaust leak (8.2.1.2 (d)) | 1 |
| Nearside Rear Outer Integral body structure inadequately repaired such that structural rigidity is significantly reduced sill (6.1.1 (d) (i)) | 1 |
| Offside Rear Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt tie wrapped upon request (6.1.7 (g) (ii)) | 1 |
| Offside Lower Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded Sill back |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside sill to floor |5.2.6| | 1 |
| Offside Front Anti-roll bar pin or bush likely to become detached Bolt broken D bush hanging on 1 mounting excessive play (5.3.4 (a) (ii)) | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill |5.3.6 |a| |i|| | 1 |
| Front Position lamp light intensity significantly reduced both |4.2.3 |a| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases rear joint deteriorated |7.1.2| | 1 |
| Exhaust has a major leak of exhaust gases blow middle pipe (6.1.2 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassie rail (5.3.6 (a) (i)) | 1 |
| Nearside Inner Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Rear Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Front brake disc insecure |3.5.1i| | 1 |
| Nearside Stop lamp not working (1.2.1b) | 1 |
| Nearside Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits 0.67 (8.2.1.2 (a)) | 1 |
| Nearside Rear Sub-frame attachment bracket/mounting fractured (5.3.3 (b) (ii)) | 1 |
| Offside Rear Sub-frame attachment bracket/mounting fractured (5.3.3 (b) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded suspension turret |2.4.A.3| | 1 |
| Offside Front Upper Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded under bonnet strut top |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar linkage likely to become detached |5.3.3 |a| |ii|| | 1 |
| Steering box leaking to the extent that oil is dripping Steering rack (2.1.1 (e) (ii)) | 1 |
| Offside Front Lower Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt Ripped. (5.3.4 (b) (ii)) | 1 |
| Exhaust catalytic converter obviously modified Non-standard fitting, clearly affecting emissions test. (8.2.1.1 (a)) | 1 |
| Power steering pipe|s| or hose|s| leaking from a joint power steering leaking |2.3.3b| | 1 |
| Exhaust system not adequately supported rear mount |7.1.1| | 1 |
| Headlamp has a product on the lens so that the light output is severely reduced both front |1.7.5a| | 1 |
| Offside Front Front suspension has excessive corrosion which reduces the strength of a load bearing member or its supporting structure subframe mounting |9.2.9| | 1 |
| Offside Front Lower Suspension arm ball joint excessively worn O/S/F (5.3.4 (a) (i)) | 1 |
| Rear Lower Seat belt anchorage prescribed area is excessively corroded nearside and offside |5.2.6| | 1 |
| Rear Lower Suspension component mounting prescribed area is excessively corroded nearside and offside |2.4.A.3| | 1 |
| Offside Rear Body has a projection caused by corrosion floor |6.1.C.1| | 1 |
| Rear Lower Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Front Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Offside Front Lower Front suspension retaining device missing |2.5.A.4| | 1 |
| Offside Inner Front Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 1 |
| Nearside Outer Rear Seat belt anchorage prescribed area is severely distorted |5.2.6| | 1 |
| Emissions not tested Due to excessive exhaust blow at rear |7.3.A.1| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg |5.3.6 |a| |i|| | 1 |
| Nearside Rear Valve stem seriously damaged split (5.2.3 (j)) | 1 |
| Offside Rear Valve stem seriously damaged split (5.2.3 (j)) | 1 |
| Hydraulic fluid leaking excessively from clutch slave cylinder (8.4.1 (a) (i)) | 1 |
| Nearside Front Lower Headlamp insecure Securing brackets broken and insecure affecting beam image. (4.1.1 (c)) | 1 |
| Exhaust has a major leak of exhaust gases rear section (6.1.2 (a)) | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill coroded (7.1.1 (a) (i)) | 1 |
| Power steering pipe/hose corroded such that the steering is adversely affected leaking |2.1.5 |g| |ii|| | 1 |
| Central Brake pipe connection leaking on a hydraulic braking system |1.1.11 |b| |ii|| | 1 |
| Side repeater not working Both. (4.4.1 (a) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill. (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired filler in sill |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded x2 |2.4.A.3| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded seat mounting point |5.2.6| | 1 |
| Offside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Side seal. |6.1.B.2| | 1 |
| Offside Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Side seal. |6.1.B.2| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded and holed (7.1.1 (a) (i)) | 1 |
| Centre Upper Stop lamp not working |1.2.1b| | 1 |
| Parking brake inoperative on one side very low 66 (1.4.1 (a)) | 1 |
| Brake disc significantly and obviously worn front band rear low effort (1.1.14 (a) (i)) | 1 |
| Headlamp light intensity severely reduced both front opaque (4.1.4 (a)) | 1 |
| Anti-roll bar linkage insecure both rear |2.4.G.1| | 1 |
| Nearside Front Front suspension has a suspension lower ball joint securing nut not locked split pin missing |2.5.B.1a| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded centre outer sill |5.2.6| | 1 |
| Power steering pipe|s| or hose|s| excessively corroded Leaking |2.3.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Chassis leg |2.4.A.3| | 1 |
| Brake pipe connection leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
| Nearside Front Lower Suspension arm ball joint likely to become detached insecure (5.3.4 (a) (ii)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill panel and wheel arch (6.2.2 (d) (i)) | 1 |
| Nearside Outer Body component insecure sill panel (6.2.1 (a) (i)) | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill holed |5.2.6| | 1 |
| Offside Outer Seat belt anchorage prescribed area is severely distorted sill holed |5.2.6| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is severely distorted sill holed |5.2.6| | 1 |
| Offside Body has an unsafe modification mirror (6.2.1 (d) (i)) | 1 |
| Offside Rear Outer Body panel corroded and likely to cause injury sill (6.2.1 (a) (i)) | 1 |
| Offside Rear Coil spring corroded so that its cross sectional area is reduced and seriously weakened top coil (5.3.1 (b) (i)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect bulb not fitted correctly (4.1.2 (c)) | 1 |
| Emissions not tested starts to over heat gas of scale |7.3.A.1| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chasis |5.3.6 |a| |i|| | 1 |
| Offside Headlamp extinguishes when tapped lightly by hand |1.2.4c| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills in places (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sills in places (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing chassis area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing chassis area (5.3.6 (a) (i)) | 1 |
| Nearside Front Service brake effort inadequate at a wheel 140/200 (1.2.1 (a) (i)) | 1 |
| Front Brake pipe at imminent risk of failure or fracture to rear pipe burst during test. (1.1.11 (a)) | 1 |
| Brake performance not tested due to burst brake pipe (1.2.1 (g)) | 1 |
| Nearside Front Lower Macpherson strut pin or bush excessively worn bush deteriorated |5.3.4 |a| |i|| | 1 |
| Offside Front Lower Macpherson strut pin or bush excessively worn bush deteriorated |5.3.4 |a| |i|| | 1 |
| Emissions not tested Engine has bad misfire (8.2.1.2 (d)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill end (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill end (7.1.1 (a) (i)) | 1 |
| Exhaust emissions carbon monoxide content excessive 0.68% |8.2.1.2 |b|| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner wheel arch area |5.2.6| | 1 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/wheel arch |6.1.1 |c| |i|| | 1 |
| Nearside Rear Body has a projection caused by corrosion panel |6.1.C.1| | 1 |
| Offside Rear Body has a projection caused by corrosion panel |6.1.C.1| | 1 |
| Exhaust emissions exceed manufacturers specified limit co high (8.2.2.2 (a)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Drivers under sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Lower Anti-roll bar linkage ball joint likely to become detached Detached (5.3.4 (a) (ii)) | 1 |
| Offside Rear Anti-roll bar linkage ball joint likely to become detached Lock nut loose (5.3.4 (a) (ii)) | 1 |
| Offside Front Anti-roll bar linkage likely to become detached Linkage adjuster locking nut loose (5.3.3 (a) (ii)) | 1 |
| Nearside Front Steering linkage likely to become detached Track rod end locking nut to track rod loose (2.1.3 (a) (ii)) | 1 |
| Offside Front Seat belt retracting mechanism defective Seat belt will not retract (7.1.2 (e)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner wheel arch corroded/holed (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill corroded/holed (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill corroded/holed (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill/floor corroded/holed (5.3.6 (a) (i)) | 1 |
| Offside Rear Anti-roll bar linkage likely to become detached (5.3.3 (a) (ii)) | 1 |
| Braking system leaking n/sr caliper |3.6.A.1| | 1 |
| Offside Rear Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive 0.43% |7.3.D.3| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer cill |5.2.6| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill towards the rear |6.1.B.2| | 1 |
| Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis both sides around front subframe mountings |6.1.1 |c| |i|| | 1 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill (6.2.2 (d) (i)) | 1 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to floor (near seat mounting part of seat belt) (6.1.1 (c) (i)) | 1 |
| Offside Suspension component mounting prescribed area is inadequately repaired inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear suspension mounting area holed behind o/s/r wheel arch, visible from under vehicle |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor section holed (7.1.1 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis |5.3.6 |a| |ii|| | 1 |
| Rear Brake disc contaminated both (1.1.14 (b)) | 1 |
| Front Brake disc contaminated Both (1.1.14 (b)) | 1 |
| Nearside Front Upper Shock absorber insecure nuts loose |2.7.2b| | 1 |
| Offside Front Upper Shock absorber insecure nuts loose |2.7.2b| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded Under bonnet. |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill inner and outer (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and floor reinforcement area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and floor reinforcement area (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced driver seat area near sill (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced chassis |7.1.1 |a| |i|| | 1 |
| Offside Rear Upper Anti-roll bar linkage has excessive play in a ball joint link ball joint |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm has excessive play in a ball joint arm ball joint |2.4.G.2| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill /floor area by seat frame/ seatbelt mounting |5.2.6| | 1 |
| Offside Front Outer Seat belt anchorage prescribed area is excessively corroded sill by seat frame/seatbelt mounting |5.2.6| | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s front section at floor (6.1.1 (c) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis above subframe |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded marked yellow |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded marked yellow |2.4.A.3| | 1 |
| Nearside Power steering component|s| leaking steering rack |2.3.3b| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded rear inner sill |2.4.A.3| | 1 |
| Nearside Rear Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Brake pipe leaking on a hydraulic braking system at clip/chassis (1.1.11 (b) (ii)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor / outrigger (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis leg holed near front subframe mounts (5.3.6 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired chassis leg near subframe mountings (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced at body outrigger near floor footwell (7.1.1 (a) (i)) | 1 |
| Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced under sill holed (7.1.1 (a) (i)) | 1 |
| Offside Front Vehicle structure has a fracture which is likely to adversely affect braking or steering under front leg covered with sealer (6.1.1 (a) (ii)) | 1 |
| Nearside Front position lamp|s| not working side light lamp |1.1.A.3b| | 1 |
| Exhaust has a major leak of exhaust gases rear joint |7.1.2| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis rail (6.1.1 (c) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner floor/sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch chassis rail (6.1.1 (c) (i)) | 1 |
| Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILL |6.1.B.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILL |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SIL |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings INNER SILL |6.1.B.2| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wing (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor to sill (6.1.1 (c) (i)) | 1 |
| Offside Front Anti-roll bar linkage has excessive play in a ball joint very excessive |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassie (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases on centre - rear joint |7.1.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded inner chassis |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner chassis |2.4.A.3| | 1 |
| Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Both sides outer sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting side sill (6.2.2 (d) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded. (7.1.1 (a) (i)) | 1 |
| Offside Rear Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 1 |
| Central Rear Parking brake inoperative on one side |1.4.1 |a|| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak rear tail pipe broken from silencer (8.2.1.1 (b)) | 1 |
| Nearside Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded outersill |2.4.A.3| | 1 |
| Rear Fuel cap/sealing device missing |7.2.4a| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Rear Sub-frame worn and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Offside Outer Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect no kick up (4.1.2 (c)) | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect kick to opposite direction (4.1.2 (c)) | 1 |
| Offside Front Upper Anti-roll bar attachment bracket/mounting insecure |5.3.3 |a| |i|| | 1 |
| Nearside Front Shock absorbers likely to become detached lower securing bolt loose (5.3.2 (a) (ii)) | 1 |
| Offside Front Brake hose excessively twisted fouling suspension on full lock (1.1.12 (b) (ii)) | 1 |
| Exhaust system insecure rear joint (6.1.2 (a)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Rear Anti-roll bar has excessive play in a ball joint both sides |2.4.G.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill. |6.1.B.2| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor section |5.2.6| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch, marked yellow |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch, marked yellow |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Anti roll bar mounting/chassis (5.3.6 (a) (i)) | 1 |
| Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded shassis |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded top strut mounting |2.4.A.3| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill corroded |7.1.1 |a| |i|| | 1 |
| Offside Front Headlamp insecure loose screw (4.1.1 (c)) | 1 |
| Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps |1.7.4b| | 1 |
| Offside Front Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Rear Exhaust has a major leak of exhaust gases silencer joint |7.1.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded lower outer sill |5.2.6| | 1 |
| Undertray likely to become detached |6.2.1 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area is severely distorted outer sill holed |2.4.A.3| | 1 |
| Nearside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor holed |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
| Offside Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
| Passenger`s airbag missing |5.4.1| | 1 |
| Offside Outer Rear Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner floor areas |7.1.1 |a| |i|| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded marked yellow |5.2.6| | 1 |
| Offside Rear Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill (6.2.2 (d) (i)) | 1 |
| Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded holed |5.2.6| | 1 |
| Nearside Rear Brake linkage has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill. |7.1.1 |a| |i|| | 1 |
| Drivers airbag missing steering wheel (7.1.5 (a)) | 1 |
| Steering wheel has movement relative to the column such that there is a serious risk of detachment (2.2.1 (a) (ii)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Central Rear Suspension component attachment bracket/mounting likely to become detached REAR CENTRE STABILIGING BAR BOLT BROKEN (5.3.3 (a) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced rear sill/arch (7.1.1 (a) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis / rollbar nount (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 1 |
| Power steering component|s| leaking from a failed seal |2.3.3b| | 1 |
| Centre Exhaust has a major leak of exhaust gases catalyst converter |7.1.2| | 1 |
| Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak center and rear exhaust |8.2.1.1 |b|| | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect faded (4.1.2 (c)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect faded (4.1.2 (c)) | 1 |
| Exhaust emits dense blue smoke at idle |7.3.A.2b| | 1 |
| Offside Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
| Subframe mounting prescribed area excessively corroded significantly reducing structural strength Front chassis excessively corroded. (5.3.6 (a) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting osf inner wing/chassis (6.2.2 (d) (i)) | 1 |
| Exhaust has a major leak of exhaust gases rear silencer (6.1.2 (a)) | 1 |
| Offside Front Upper Subframe mounting prescribed area is inadequately repaired (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Under door sill (5.3.6 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill to floor area (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced 1/4 sill to floor area (7.1.1 (a) (i)) | 1 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded by axle and anti rollbar area |2.4.A.3| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded by axle and anti roll bar area |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded bottom of sill area |2.4.A.3| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded floor pan area |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired chassis |2.4.A.3| | 1 |
| Central Exhaust has a major leak of exhaust gases to rear section joint |6.1.2 |a|| | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits 1.205 |8.2.1.2 |c|| | 1 |
| Seat belt anchorage loose nearside and offside upper (7.1.1 (b)) | 1 |
| Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength nearside and offside front chassis (5.3.6 (a) (i)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition rear silencer not fitted |7.1.4| | 1 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Rear Brake pipe at imminent risk of failure or fracture |1.1.11 |a|| | 1 |
| Emissions not tested emissions not tested due to engine missfire |7.3.A.1| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded body sill |5.2.6| | 1 |
| Offside Front Shock absorbers insecurely attached lower bush |5.3.2 |a| |i|| | 1 |
| Nearside Front Bumper damaged and likely to cause injury when grazed or contacted bumper/splitter (6.1.4 (a) (i)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits 0.63 (8.2.1.2 (b)) | 1 |
| Nearside Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt missing (7.1.2 (a)) | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/floor area holed significantly |7.1.1 |a| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis member close to osf spring |6.1.B.2| | 1 |
| Offside Front Outer Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Front Anti-roll bar attachment bracket/mounting worn and its strength is seriously reduced |2.4.G.1| | 1 |
| Obligatory mirror does not provide a view to the rear items to be removed from mirror (3.3 (c)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor pan by sill (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inside wheel arch, chassis corroded (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inside wheel arch, chassis corroded (6.2.2 (d) (i)) | 1 |
| Offside Front Lower Macpherson strut pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases rear flange (6.1.2 (a)) | 1 |
| Emissions unable to be completed unable to get reading due to leak (8.2.1.2 (d)) | 1 |
| Nearside Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired chassis (6.2.2 (d) (ii)) | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings around offside front anti roll bar |6.1.B.2| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sill corroded |6.1.B.2| | 1 |
| Offside Integral body structure is deformed and structural rigidity is significantly reduced inner floor |6.1.1 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in arch (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases Rear tail pipe |7.1.2| | 1 |
| Position lamp not working both sides front (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength underbody floor sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS RAIL (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
| Oil leaking excessively from transmission (8.4.1 (a) (i)) | 1 |
| Bumper insecure BOTH rear sections of front bumper (that attach to the front quarter panels) loose (6.1.4 (a) (i)) | 1 |
| Exhaust emissions carbon monoxide content excessive Readings showing 0.650 -0.700 (limit 0.300) readings taken @3500rpm (8.2.1.2 (b)) | 1 |
| Emissions not tested no cat fitted (8.2.1.2 (d)) | 1 |
| Front Front position lamp|s| not working Both fronts not working |1.1.A.3b| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded Under floor |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Under floor |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill |7.1.1 |a| |i|| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded sill to floor |5.2.6| | 1 |
| Nearside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member behind wheel (6.1.1 (c) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg |5.3.6 |a| |i|| | 1 |
| Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg |5.3.6 |a| |i|| | 1 |
| Front Seat belt anchorage prescribed area is excessively corroded and rear floor to sill |5.2.6| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor near seat mount. |6.1.B.2| | 1 |
| Nearside Rear brake disc contaminated by brake fluid |3.5.1h| | 1 |
| Nearside Rear Body panel damaged and likely to cause injury wheel arch (6.2.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded body sill |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded body sill |5.2.6| | 1 |
| Position lamp not working |4.2.1 |a| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
| Offside Rear Headlamp not working on main beam |1.7.5a| | 1 |
| Nearside Front Power steering component leaking cant see covers fitted (2.1.5 (a)) | 1 |
| Exhaust has a major leak of exhaust gases center |7.1.2| | 1 |
| Nearside Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Nearside Front Anti-roll bar attachment bracket inappropriately repaired |2.4.A.2| | 1 |
| Tailgate cannot be secured in the closed position |6.4.1| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor pan |6.1.B.2| | 1 |
| Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill |6.2.2 |d| |ii|| | 1 |
| Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill |6.2.2 |d| |ii|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor and both outer sills (7.1.1 (a) (i)) | 1 |
| Front Upper Suspension arm corroded and seriously weakened both |2.4.G.1| | 1 |
| Nearside Rear An item not tested |Manual| | 1 |
| Headlamp has a product on the lens so that the light output is severely reduced |4.1.4 |b|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced In wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS W/BONE MOUNTING (5.3.6 (a) (i)) | 1 |
| Offside Drivers seat insecure (6.2.5 (a) (ii)) | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheel arch |6.1.A.1| | 1 |
| Offside Rear Inner Subframe mounting prescribed area is excessively corroded sill holed |2.4.A.3| | 1 |
| Offside Rear Suspension arm corroded and seriously weakened arm holed |2.4.G.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheel arch |6.1.A.1| | 1 |
| Nearside Front Anti-roll bar linkage synthetic mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear All position lamps not working |1.1.A.3b| | 1 |
| Fuel cap/sealing device does not fasten securely by positive means temp cap fitted with no fastening device |7.2.4b| | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Front Electrical wiring insecure alt wires rubbing on steering shaft |1.9.2a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded lower shock mount |2.4.A.3| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded shock mount |2.4.A.3| | 1 |
| Nearside Rear Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Rear Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive C,o497 |7.3.D.3| | 1 |
| Exhaust emissions hydrocarbon content after 2nd fast idle excessive 426 ppm |7.3.D.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Floor section |5.2.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded Floor section |5.2.6| | 1 |
| Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both sides sills (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sidesill excessivly corroded |7.1.1 |a| |i|| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded central sill |5.2.6| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded central sill |5.2.6| | 1 |
| Exhaust has a major leak of exhaust gases flange ,system to rear silencer excessivly corroded |7.1.2| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded rear inner sidesill |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded [ front seat mounting] inner sidesill |5.2.6| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sidesill |7.1.1 |a| |i|| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sidesill split |7.1.1 |a| |i|| | 1 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt & play in ball joint |5.3.4 |b| |ii|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded. (7.1.1 (a) (i)) | 1 |
| Nearside Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 1 |
| Nearside Rear Parking brake inoperative on one side parking brake very weak |1.4.1 |a|| | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment or mechanical failure (1.1.6 (c)) | 1 |
| Emissions not tested CO was so high it kept defaulting Exhaust Gas Analyser (8.2.1.2 (d)) | 1 |
| Offside Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings nsr inner sill. |6.1.B.2| | 1 |
| Driver`s airbag obviously defective air bag light on |5.4.1| | 1 |
| Nearside Front Track rod end repaired by welding |2.2.C.1e| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill/ rear wing |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg holed at |2.4.A.3| | 1 |
| Side repeater incorrect colour Both side repeaters white (4.4.3 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at anti roll bar mount |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Holes all around anti roll bar mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Holes all around anti roll bar mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded sill at rear small hole |5.2.6| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis section holed behind front wheel |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis section behind front wheel |6.1.B.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded floor |2.4.A.3| | 1 |
| Nearside Rear Outer Seat belt anchorage prescribed area is inadequately repaired cill area (7.1.1 (a) (i)) | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced cill area (7.1.1 (a) (i)) | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced cill section corroded (7.1.1 (a) (i)) | 1 |
| Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced cill section corroded (7.1.1 (a) (i)) | 1 |
| Emissions unable to be completed failing on lamda but then went into overheating so aborted (8.2.1.2 (d)) | 1 |
| Offside Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Nearside Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Offside Front Ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Front Inner Suspension arm corroded and seriously weakened chassi leg |2.4.G.1| | 1 |
| Offside Front Outer Suspension arm corroded and seriously weakened chassi leg |2.4.G.1| | 1 |
| Nearside Outer Rear Anti-roll bar linkage insecure |2.4.G.1| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis various places |2.4.A.3| | 1 |
| Offside Front Body insecure and dangerous to other road users wing |6.1.B.1b| | 1 |
| Nearside Rear Lower Suspension arm cracked |2.4.G.1| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced cill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced cill (7.1.1 (a) (i)) | 1 |
| Electrical wiring likely to touch hot or rotating parts under lights wiring attached to suspension /handbrake cables (4.11 (a) (iii)) | 1 |
| Electrical wiring insulation in such a condition there is an imminent risk of fire or formation of sparks wiring on exhaust (4.11 (c) (iii)) | 1 |
| Headlamp aim projected beam image is obviously incorrect o/s (4.1.2 (c)) | 1 |
| Headlamp aim projected beam image is obviously incorrect n/s (4.1.2 (c)) | 1 |
| Rear reflector missing o/s (4.8.2 (a) (ii)) | 1 |
| Rear reflector missing n/s (4.8.2 (a) (ii)) | 1 |
| Position lamp light intensity significantly reduced o/s front (4.2.3 (a) (ii)) | 1 |
| Position lamp light intensity significantly reduced n/s front (4.2.3 (a) (ii)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced o/s outer sill (7.1.1 (a) (i)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced n/s outer sill (7.1.1 (a) (i)) | 1 |
| Track rod end ball joint has excessive play o/s (2.1.3 (b) (i)) | 1 |
| Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel both sides (1.3.1 (a) (i)) | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill. (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Floor pan (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill end |7.1.1 |a| |i|| | 1 |
| Nearside Front Anti-roll bar linkage ball joint excessively worn top |5.3.4 |a| |i|| | 1 |
| Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Seat belt anchorage prescribed area is inadequately repaired floor to sill area |5.2.6| | 1 |
| Nearside Front Anti-roll bar linkage damaged and seriously weakened |5.3.3 |b| |i|| | 1 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid Caliper (1.1.16 (b) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Front Vehicle structure has a fracture which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Front Suspension arm ball joint likely to become detached |5.3.4 |a| |ii|| | 1 |
| Emissions not tested Due to engine misfire and running on only 3 cylinders |7.3.A.1| | 1 |
| Offside Front Torsion bar excessive play at an end fixing |2.4.E.2| | 1 |
| Emissions not tested excessive leakage |7.3.A.1| | 1 |
| Nearside Rear Exhaust system not adequately supported its possible for exhaust to come in contact with nearside rear drive shaft |7.1.1| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Upper suspension arm (5.3.6 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill excessive corrosion (7.1.1 (a) (i)) | 1 |
| Offside Front Brake valve leaking Caliper (1.1.7 (d) (i)) | 1 |
| Offside Seat belt not functioning as intended (7.1.2 (c)) | 1 |
| Fluid leak harmful to the environment or a risk to other road users PAS (8.4.1 (a) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SILL (6.1.1 (c) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SILL (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SILL (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SILL (6.1.1 (c) (i)) | 1 |
| Tie bar/rod worn and seriously weakened |2.4.G.1| | 1 |
| Tie bar/rod corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear Lower Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Lower Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Nearside Front Upper Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Offside Front Upper Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Offside Outer Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Seat belt anchorage prescribed area is excessively corroded o/s/r and n/s/r sidesills holed and corroded within 30 cm of seat belt mounting |5.2.6| | 1 |
| Emissions not tested test aborted |7.3.A.1| | 1 |
| Offside Front Inner Vehicle structure has excessive corrosion which adversely affects braking or steering sill area |6.1.A.1| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength and offside rear outersills ,inner wheel arches and side chassies corroded |5.3.6 |a| |i|| | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear Exhaust has a major leak of exhaust gases exhaust silencer and centre section excessively corroded. (6.1.2 (a)) | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Central sill (7.1.1 (a) (i)) | 1 |
| Fluid leaking continuously posing a serious risk to road safety power steering (8.4.1 (a) (ii)) | 1 |
| Nearside Steering locking device missing (2.1.3 (d)) | 1 |
| Central Exhaust emissions likely to be affected by an exhaust leak Emissions failed (8.2.1.1 (b)) | 1 |
| Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 1 |
| Nearside Front Headlamp light intensity severely reduced recommend cleaning (4.1.4 (a)) | 1 |
| Exhaust has a major leak of exhaust gases from the centre and rear sections (6.1.2 (a)) | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded sill panel |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded sill panel |2.4.A.3| | 1 |
| Offside Inner Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Seat belt anchorage prescribed area is excessively corroded small hole on chassis |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL IN SEVERAL PLACES (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced INNER SILL IN SEVERAL PLACES (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced FLOOR / RAIL (7.1.1 (a) (i)) | 1 |
| Emissions unable to be completed Carbon monoxide and Lambda readings way over (8.2.1.2 (d)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded chassis, next to brake pipe mounting |2.4.A.3| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded chassis, next to brake pipe mounting |5.2.6| | 1 |
| Brake lever has insufficient reserve travel adjust (1.1.2 (a)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Rear outer sill (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength Chassis leg withing 30cm of anti roll mounting point (5.3.6 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded Centre inner sill/ floor |5.2.6| | 1 |
| Nearside Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 1 |
| Centre Braking system leaking front to rear brake pipe |3.6.A.1| | 1 |
| Offside Front Anti-roll bar has excessive play in a ball joint broken and adrift |2.4.G.2| | 1 |
| Nearside Upper Fuel cap/sealing device mounting flange/sealing method defective |7.2.4c| | 1 |
| Offside Rear Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
| Road wheel badly damaged |4.2.A.1a| | 1 |
| Brake pedal has insufficient reserve travel spongy (1.1.2 (a)) | 1 |
| Offside Front Braking system leaking hose to caliper |3.6.A.1| | 1 |
| Offside Rear Lower Suspension arm has excessive play in a pin/bush front |2.4.G.2| | 1 |
| Exhaust has a major leak of exhaust gases Multiple points (6.1.2 (a)) | 1 |
| Offside Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced undersill holed x2 (7.1.1 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced under sill holed x2 (7.1.1 (a) (i)) | 1 |
| Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sills rusty, both sides (7.1.1 (a) (i)) | 1 |
| Offside Inner Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Nearside Inner Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Nearside Front Macpherson strut insecure and impairing directional stability |5.3.3 |a| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases cat back |6.1.2 |a|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear boot floor |5.3.6 |a| |i|| | 1 |
| Offside Rear Anti-roll bar linkage insecurely attached bottom ball joint insecurely fastened |5.3.3 |a| |i|| | 1 |
| Offside Front Track rod end ball joint worn to the extent there is a serious risk of detachment split pin missing |2.1.3 |b| |ii|| | 1 |
| Braking system leaking o/s/r brake caliper |3.6.A.1| | 1 |
| Emissions not tested major exhaust leak |7.3.A.1| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill / sill end / wheel arch |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sill area |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded oiter sill / sill end / wheel arch |5.2.6| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis behind wheel |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis behind wheel |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch = chassis leg (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch = chassis leg (5.3.6 (a) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis near arch (6.2.2 (d) (i)) | 1 |
| Offside Front Anti-roll bar linkage fractured broken |5.3.3 |b| |ii|| | 1 |
| Nearside Front Anti-roll bar fractured broken |2.4.G.1| | 1 |
| Central Exhaust has a major leak of exhaust gases joint blowing |7.1.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis near anti roll bar mounting as marked |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail near anti roll bar mounting,as marked |2.4.A.3| | 1 |
| Offside Parking brake inoperative on one side very low reading (1.4.1 (a)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill to floor,as marked (7.1.1 (a) (i)) | 1 |
| Nearside Front Service brake excessively binding disc discoloured (1.2.1 (f)) | 1 |
| Exhaust has a major leak of exhaust gases Rear silencer to centre section on joint (6.1.2 (a)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper chassis (5.3.6 (a) (i)) | 1 |
| Power steering malfunctioning |2.1.5 |a|| | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits Exhaust leak (8.2.1.2 (c)) | 1 |
| Nearside Front Anti-roll bar linkage ball joint excessively worn Play in joint, corroded (5.3.4 (a) (i)) | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill panel |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sill panel |5.2.6| | 1 |
| Nearside Rear Exhaust has a major leak of exhaust gases joint |7.1.2| | 1 |
| Offside Rear Brake pipe leaking on a hydraulic braking system Pipe to flexi hose (1.1.11 (b) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases backbox |7.1.2| | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill backing (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor near seat mounting (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis at anti roll bar mounting |2.4.A.3| | 1 |
| Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Braking system leaking Offside rear caliper area, looks like the handbrake pivot |3.6.A.1| | 1 |
| Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i)) | 1 |
| Nearside Front Wheel bearing rough when rotated not checked brake bind (5.1.3 (b) (i)) | 1 |
| Offside Front Wheel bearing rough when rotated not checked brake bind (5.1.3 (b) (i)) | 1 |
| Nearside Inner Front Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Front Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill 2 places marked in yellow (6.1.1 (c) (i)) | 1 |
| Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside inner sill holed |5.2.6| | 1 |
| Nearside Rear Shock absorbers likely to become detached coil spring mount (5.3.2 (a) (ii)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected on shock (5.3.6 (a) (ii)) | 1 |
| Central Exhaust has a major leak of exhaust gases rear flange rotten and blowing |7.1.2| | 1 |
| Emissions not tested due to exhaust blow |7.3.A.1| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect Incorrectly wired (4.1.2 (c)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded seat belt mount |5.2.6| | 1 |
| Nearside Rear Brake disc significantly and obviously worn inner side (1.1.14 (a) (i)) | 1 |
| Offside Rear Brake disc significantly and obviously worn inner side (1.1.14 (a) (i)) | 1 |
| Nearside Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail | inner arch| |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer door sill |5.2.6| | 1 |
| Front Brake pipe leaking union on brake master cylinder |3.6.A.1| | 1 |
| Parking brake lever defective so that it cannot be satisfactorily operated |1.1.6 |d|| | 1 |
| Parking brake inoperative on one side Both sides |1.4.1 |a|| | 1 |
| Offside Front Electrical wiring deteriorated and bare wires exposed |1.9.2c| | 1 |
| Offside Front Electrical wiring damaged, likely to cause a short |1.9.2b| | 1 |
| Offside Front Electrical wiring damaged and bare connector exposed |1.9.2c| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Panel Behind Front Wheel (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Panel Behind Front Wheel (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area is inadequately repaired Offside and Nearside Sills (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg corroded and holed under bonnet (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) | 1 |
| Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected outer sills x2 ns os (5.3.6 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sills ns os (5.3.6 (a) (i)) | 1 |
| Rear Coil spring corroded so that its cross sectional area is reduced and seriously weakened top x2 (5.3.1 (b) (i)) | 1 |
| Nearside Front Coil spring corroded so that its cross sectional area is reduced and seriously weakened top (5.3.1 (b) (i)) | 1 |
| Fuel cap/sealing device ineffective temporary cap fitted |6.1.3 |b| |i|| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement temp cap |7.2.4b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded Area adjacent to anti roll bar and sub frame mounting points corroded and holed |2.4.A.3| | 1 |
| Nearside Rear Lower Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Rear Sub-frame attachment bracket/mounting insecure strengthing plate bolt missing |5.3.3 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis area |2.4.A.3| | 1 |
| Offside Front Lower Suspension arm locating pin locking device missing |2.4.G.3b| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded chassis rail on outside |2.4.A.3| | 1 |
| Offside Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
| Offside Rear Brake disc contaminated |1.1.14 |b|| | 1 |
| Seat belt anchorage prescribed area is excessively corroded offside rear inner sill |5.2.6| | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Fuel cap/sealing device ineffective not opening (6.1.3 (b) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner chassie rail (5.3.6 (a) (i)) | 1 |
| Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced corroded outer sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Windscreen wiper not working |3.4 |a|| | 1 |
| Nearside Front Steering locking device missing track rod end split pin missing |2.1.3 |d|| | 1 |
| Passenger`s airbag obviously defective |5.4.1| | 1 |
| Nearside Front seat belt pretensioner deployed |5.4.3b| | 1 |
| Offside Front seat belt pretensioner deployed |5.4.3b| | 1 |
| Central Obligatory mirror missing |8.1.1| | 1 |
| Central Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
| Nearside Front Inner Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill to chassis (6.2.2 (d) (ii)) | 1 |
| Nearside Front Inner Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired sill holed (6.2.2 (d) (ii)) | 1 |
| Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill area (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill area holed (6.2.2 (d) (i)) | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill panelling |5.2.6| | 1 |
| Nearside Side repeater incorrect colour |4.4.3 |a|| | 1 |
| Offside Side repeater incorrect colour |4.4.3 |a|| | 1 |
| Nearside Front Anti-roll bar pin or bush excessively worn Drop link |5.3.4 |a| |i|| | 1 |
| Offside Front Suspension component pin or bush excessively worn Shock absorber rubber bush deteriorated. |5.3.4 |a| |i|| | 1 |
| Rear Service brake effort inadequate at a wheel Both O/S & N/S |1.2.1 |a| |i|| | 1 |
| Offside Front Brake pipe at imminent risk of failure or fracture to rear at rear corroded and leaking (1.1.11 (a)) | 1 |
| Nearside Rear Inner Suspension arm insecurely attached bolt sheared in chassis (5.3.3 (a) (i)) | 1 |
| Nearside Front Suspension arm insecure |2.4.G.1| | 1 |
| Rear Exhaust has a major leak of exhaust gases fixing from middle to rear |7.1.2| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sil |5.2.6| | 1 |
| Nearside Front Steering component mounting prescribed area is excessively corroded chassis area |2.2.C.1h| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/floor (7.1.1 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/floor (7.1.1 (a) (i)) | 1 |
| Nearside Rear Sub-frame attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction dash cam/ phone holder (3.1 (a) (ii)) | 1 |
| Nearside Body has a projection caused by damage |6.1.C.1| | 1 |
| Exhaust has a major leak of exhaust gases cat blowing |7.1.2| | 1 |
| Nearside front parking brake recording little or no effort |3.7.B.6a| | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail |6.1.1 |c| |i|| | 1 |
| Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor |6.1.1 |c| |i|| | 1 |
| Nearside Rear Direction indicators not working |1.4.A.2c| | 1 |
| Electrical wiring likely to drag on the ground also earth wire broken at rear |4.11 |a| |iii|| | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn fitted incorrectly |5.3.4 |a| |i|| | 1 |
| Offside Front Shock absorbers likely to become detached mount point on arm corroded (5.3.2 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area / chassis holed (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail next to anti roll bar d bush bracket |5.3.6 |a| |i|| | 1 |
| Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by anti roll bar mounting holed!! |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by anti roll bar mounting!! holed!! |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor holed within 12" of seat mounting! |7.1.1 |a| |i|| | 1 |
| Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/floor (5.3.6 (a) (i)) | 1 |
| Rear fog lamp tell-tale missing |4.9.1 |a| |ii|| | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Offside Rear Upper Anti-roll bar linkage insecurely attached |5.3.3 |a| |i|| | 1 |
| Front front brakes release unevenly |3.7.B.4| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Sill |5.3.6 |a| |i|| | 1 |
| Offside Front Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Wing |5.3.6 |a| |i|| | 1 |
| Front front brake binding both sides |3.7.B.1| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` holder |8.3.1e| | 1 |
| Rear Exhaust has a major leak of exhaust gases exhaust box
catalist broke up inside |7.1.2| | 1 |
| Nearside Rear Exhaust system insecure (6.1.2 (a)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area (7.1.1 (a) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area (7.1.1 (a) (i)) | 1 |
| Power steering pipe|s| or hose|s| leaking at steering rack |2.3.3b| | 1 |
| Brake performance not tested fluid leak |3.7.A.1| | 1 |
| Front Headlamps matched pair are not the same colour |1.7.6| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg at subframe mountings |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg at subframe mounting |6.1.A.1| | 1 |
| Nearside Front Upper Anti-roll bar linkage insecurely attached (5.3.3 (a) (i)) | 1 |
| Nearside Front Headlamp adversely affected by the operation of another lamp |1.7.5c| | 1 |
| Nearside Rear Outer Subframe mounting prescribed area is excessively corroded sill weld patch isnt up to standard |2.4.A.3| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded on the floor |5.2.6| | 1 |
| Offside Front Anti-lock braking system wiring excessively damaged |3.4.3| | 1 |
| Nearside Front Anti-lock braking system wiring excessively damaged |3.4.3| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill/floor section (6.2.2 (d) (i)) | 1 |
| Nearside Rear Braking system leaking banjo connection |3.6.A.1| | 1 |
| Emissions unable to be completed engine running rough (8.2.1.2 (d)) | 1 |
| Offside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/floor |7.1.1 |a| |i|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis see yellow chalk |6.1.1 |c| |i|| | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced mid chassis see yellow chalk |6.1.1 |c| |i|| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner wheelarch on chassis |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded inner wheelarch on chassis |2.4.A.3| | 1 |
| Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt bottom rubber |2.4.G.2| | 1 |
| Exhaust has a major leak of exhaust gases centre box joint |7.1.2| | 1 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits 1.072 |7.3.D.3| | 1 |
| Offside Front Hydraulic fluid leaking excessively brake caliper area (8.4.1 (a) (i)) | 1 |
| Nearside Front Headlamp not working on dipped beam replacement 472 bulbs |1.7.5a| | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced BOTH INNER AND OUTER SILLS |7.1.1 |a| |i|| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired LOWER BODY |7.1.1 |a| |i|| | 1 |
| Rear Exhaust has a major leak of exhaust gases ON JOINT TO CENTRE AND SLIGHT LEAK FROM WELD |6.1.2 |a|| | 1 |
| Offside Front Inner Road wheel badly distorted (5.2.2 (c) (i)) | 1 |
| Front Headlamp levelling device inoperative both sides (4.1.5 (a)) | 1 |
| Emissions unable to be completed over heated (8.2.1.2 (d)) | 1 |
| Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f)) | 1 |
| Offside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Emissions not tested due to engine overheat and cut out |8.2.1.2 |d|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg at roll bar mounting (5.3.6 (a) (i)) | 1 |
| Brake pipe leaking on a hydraulic braking system main front to rear (1.1.11 (b) (ii)) | 1 |
| Offside Body component damaged and likely to cause injury mirror |6.2.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floor holed |5.2.6| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded front chassis leg |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded front chassis leg |2.4.A.3| | 1 |
| Offside Suspension component mounting prescribed area is inadequately repaired front chassis leg |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded main chassis |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded main chassis |2.4.A.3| | 1 |
| Rear Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.3.D.1| | 1 |
| Nearside Rear Outer Subframe mounting prescribed area is excessively corroded body sill |2.4.A.3| | 1 |
| Nearside Lower Seat belt anchorage prescribed area is excessively corroded central floor/body sill |5.2.6| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced marked yellow ) chassie leg (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength marked yellow ) within wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength marked yellow (5.3.6 (a) (i)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under vehicle ) marked yellow (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced marked yellow ( outer sill (6.1.1 (c) (i)) | 1 |
| Offside Front Anti-lock braking system wiring excessively damaged Insecure (1.6 (d)) | 1 |
| Hydraulic fluid leaking excessively power steering fluid |8.4.1 |a| |i|| | 1 |
| Nearside Front Upper Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i)) | 1 |
| Nearside Rear Brake hose connection leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 1 |
| Offside Rear Exhaust has a major leak of exhaust gases flange leakin |7.1.2| | 1 |
| Offside Rear Exhaust system not adequately supported stud broken on exhaust flange |7.1.1| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor holed by seat mounting |6.1.B.2| | 1 |
| Offside Rear Wheel stud|s| missing |4.2.A.1e| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i)) | 1 |
| Emissions not tested due to co level to high rattle on cat (8.2.1.2 (d)) | 1 |
| Offside Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Offside Headlamp aim not tested No image |4.1.2 |b|| | 1 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive 0.56% |7.3.D.3| | 1 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits 1.13 |7.3.D.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/chassis area (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch/chassis area (5.3.6 (a) (i)) | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded Inner sill/Floor |5.2.6| | 1 |
| Nearside Front Anti-roll bar linkage insecure broken |2.4.G.1| | 1 |