>

MOT History from tests of diesel MAZDA MPVs year 2001

Review the list of common MAZDA MPV failures below or to perform a specific mot history check on your MAZDA then use our popular KnowYourCar service

mot history
Pass percent:66.98%
(The average a diesel MAZDA MPV year 2001 passes without issue)
Based on:106 MOT Tests
Most common failuresNo# failures
Windscreen wiper does not clear the windscreen effectively11
Headlamp aim out of alignment8
Offside Rear fog lamp not working |1.3.2b|3
Front brake disc in such a condition that it is seriously weakened3
Registration plate lamp issues3
Rear fog lamp switch missing |1.3.1a|2
Rear fog lamp not working |1.3.2b|2
Parking brake efficiency below requirements (1.4.2 (a) (i))2
Rear Mechanical brake component has restricted free movement2
Anti-lock braking system warning lamp indicates an ABS fault1
Nearside Rear Direction indicator incorrect colour |1.4.A.2f|1
Offside Stop lamp not working |1.2.1b|1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill and Outrigger by Front Suspension Mounting (5.3.6 (a) (i))1
Offside Stop lamp(s) not working (4.3.1 (a) (ii))1
Offside Rear fog lamp does not emit a steady red light (4.5.4 (a))1
Offside Rear fog lamp missing |1.3.2a|1
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii||1
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||1
Nearside Front Suspension arm ball joint excessively worn |5.3.4 |a| |i||1
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|1
Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Centre Rear Exhaust system not adequately supported bracket |7.1.1|1
Offside Front Headlamp not working on dipped beam |1.7.5a|1
Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|1
Offside Rear Suspension component mounting prescribed area is excessively corroded sill to floor |2.4.A.3|1
Offside Battery insecure |1.9.1|1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced BODY SILL COMPLETE LENGHT (7.1.1 (a) (i))1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced BODY SILL COMPLETE LENGHT (7.1.1 (a) (i))1
Central Stop lamp(s) not working (4.3.1 (a) (ii))1
Nearside Front Position lamp not working (4.2.1 (a) (ii))1
Brake pipe excessively corroded1
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected BODY SILL |5.3.6 |a| |ii||1
Rear fog lamp not working |4.5.1 |a| |ii||1
Nearside Front Service brake excessively binding |1.2.1 |f||1
Offside Front Service brake excessively binding |1.2.1 |f||1
Offside Front Suspension arm ball joint excessively worn SWIVEL |5.3.4 |a| |i||1
Rear Brake disc significantly and obviously worn rear discs inner faces (1.1.14 (a) (i))1
Nearside Rear Brake disc contaminated diff seal leaking on disc and inner handbrake shoes. (1.1.14 (b))1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill and Outrigger Chassis by Front Suspension Mounting (5.3.6 (a) (i))1
Wheel nut|s| missing |4.2.A.1e|1
Power steering component leaking from steering rack pinion. |2.1.5 |a||1
Nearside Rear Statutory seat belt missing |5.1.1|1
Offside Rear Statutory seat belt missing |5.1.1|1
Registration plate issues1
Nearside Front position lamp|s| incorrect colour |1.1.A.3e|1
Offside Front position lamp|s| incorrect colour |1.1.A.3e|1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner Sill, By Spring Hanger Mountings (5.3.6 (a) (i))1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner Sill Corroded by Seat Belt Mounting Area (7.1.1 (a) (i))1
Nearside Front Anti-roll bar linkage insecure |2.4.G.1|1
Offside Front Anti-roll bar linkage insecure |2.4.G.1|1
Rear Exhaust system not adequately supported |7.1.1|1
Offside Front Tie bar/rod has excessive play in a ball joint |2.4.G.2|1
Front Battery insecure |1.9.1|1
Offside Front Front position lamp|s| not working |1.1.A.3b|1
Windscreen washer not working 1
Exhaust system insecure (6.1.2 (a))1
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))1
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))1
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))1
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2|1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch |6.1.B.2|1
Nearside Stop lamp not working |1.2.1b|1
Offside Rear Stop lamp not working |1.2.1b|1
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a|1
Offside Front Front constant velocity joint gaiter split |2.5.C.1a|1
Nearside Rear Towbar excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))1
Offside Rear Towbar excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy