Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 7 |
Registration plate lamp issues | 5 |
Horn not working |1.6.2a| | 3 |
Headlamp aim out of alignment | 3 |
Brake pipe excessively corroded | 2 |
Windscreen wiper blade insecure | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Offside Stop lamp not working |1.2.1b| | 2 |
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Rear Towbar excessively corroded within 30cm of towbar mounting chassis cross member |6.1.6 |i| |i|| | 1 |
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Rear brake binding | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Nearside Front Upper Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Anti-lock braking system warning lamp does not illuminate |3.4.1b| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Exhaust mounting missing |7.1.1b| | 1 |
All position lamps not working |1.1.A.3b| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Offside Rear Rear fog lamp missing |1.3.2a| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Rear fog lamp switch missing |1.3.1a| | 1 |
Nearside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
Rear fog lamp not working |1.3.2b| | 1 |
Offside Rear fog lamp emits a light other than red |1.3.2e| | 1 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
Anti-lock braking system warning lamp indicates an ABS fault | 1 |
Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Nearside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Headlamp aim not tested (4.1.2 (b)) | 1 |
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b)) | 1 |
Exhaust has a major leak of exhaust gases pipe off front pipe (6.1.2 (a)) | 1 |
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Rear Anti-roll bar linkage pin or bush excessively worn d bush (5.3.4 (a) (i)) | 1 |
Offside Rear Anti-roll bar linkage pin or bush excessively worn d-bush (5.3.4 (a) (i)) | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Lower Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Battery insecure |1.9.1| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |