Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 10 |
Headlamp aim out of alignment | 7 |
Offside Steering rack gaiter split |2.2.D.2d| | 4 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
Registration plate issues | 4 |
Horn not working |1.6.2a| | 4 |
Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 3 |
Registration plate lamp issues | 3 |
Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 3 |
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Lower Steering column universal joint has excessive play |2.1.5| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Offside Stop lamp not working |1.2.1b| | 2 |
Offside Rear Rear fog lamp missing |1.3.2a| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Battery insecure |1.9.1| | 1 |
Offside Headlamp aim not tested |4.1.2 |b|| | 1 |
Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Offside Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Offside Front Anti-roll bar ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Nearside Front Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Offside Front Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Offside Rear Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Nearside Rear Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Rear Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Lower Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Lower Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Front Service brake excessively binding (1.2.1 (f)) | 1 |
Nearside Headlamp excessively deteriorated so that the light output is severely reduced lens |1.7.5a| | 1 |
Offside Headlamp excessively deteriorated so that the light output is severely reduced lens |1.7.5a| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
Nearside Headlamp aim beam image obviously incorrect lens |1.8.A.1b| | 1 |
Offside Headlamp aim beam image obviously incorrect lens |1.8.A.1b| | 1 |
Nearside Stop lamp not working switch? |1.2.1b| | 1 |
Offside Stop lamp not working switch? |1.2.1b| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion arch |6.1.C.1| | 1 |
Offside Rear Body has a sharp edge caused by corrosion arch |6.1.C.1| | 1 |
Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill end |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded sill end |2.4.A.3| | 1 |
Offside Front Obligatory mirror insecure |8.1.1| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL (5.3.6 (a) (i)) | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL (5.3.6 (a) (i)) | 1 |
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength ARCH (5.3.6 (a) (i)) | 1 |
Nearside Rear Vehicle structure is so weakened by corrosion within 30cm of a towbar mounting, the towbar is likely to become detached (6.1.6 (i) (ii)) | 1 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Inner Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Power steering ram|s| leaking from a failed seal |2.3.3b| | 1 |
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Fuel system component leaking |7.2.3| | 1 |
Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Offside Rear position lamp|s| incorrect colour white light to rear |1.1.A.3e| | 1 |
Offside Battery insecure |1.9.1| | 1 |
Offside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Steering rack gaiter insecure |2.2.D.2d| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Side repeater incomplete |1.5.A1b| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Brakes imbalanced across an axle | 1 |
Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Fuel cap/sealing device missing |7.2.4a| | 1 |
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Power steering fluid level below minimum |2.3.1| | 1 |
Power steering ram|s| leaking from a failed joint |2.3.3b| | 1 |
Nearside Rear Rear position lamp|s| has a product on the lens so it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Rear fog lamp emits a light other than red |1.3.2e| | 1 |
Nearside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer seal holed |2.4.A.3| | 1 |
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded seal holed |2.4.A.3| | 1 |
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch holed |2.4.A.3| | 1 |
Offside Front Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
Rear Coil spring corroded so that its cross sectional area is reduced and seriously weakened both sides |5.3.1 |b| |i|| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 1 |
Power steering pipe|s| or hose|s| leaking |2.3.3b| | 1 |
Nearside Rear Body has a projection caused by corrosion |6.1.C.1| | 1 |
Offside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Brake pipe modified and seriously weakened |3.6.A.3| | 1 |
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Offside Rear Inner Body panel corroded and likely to cause injury (6.2.1 (a) (i)) | 1 |
Offside Rear Outer Body panel damaged and likely to cause injury (6.2.1 (a) (i)) | 1 |
Offside Rear Rear fog lamp obviously incorrectly positioned (4.5.4 (a)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sil (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
Offside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Rear Statutory seat belt missing |5.1.1| | 1 |
Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
Offside Front Direction indicator insecure temp repaired - however still loose |1.4.A.2b| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Rear fog lamp switch missing |1.3.1a| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
Nearside Front Upper Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Lower Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Upper Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Lower Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Outer Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |