MOT History from tests of petrol MAZDA MAZDA6s year 2004

Review the list of common MAZDA MAZDA6 failures below or to perform a specific mot history check on your MAZDA then use our popular KnowYourCar service

mot history

Pass percent:71.36%

(The average a petrol MAZDA MAZDA6 year 2004 passes without issue)

Based on:125,268 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	6006
Windscreen wiper does not clear the windscreen effectively	5960
Registration plate lamp issues	5434
Parking brake: efficiency below requirements \|3.7.B.7\|	4036
Rear parking brake recording little or no effort	2836
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	2652
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	2609
Brake pipe excessively corroded	1960
Brakes imbalanced across an axle	1624
Rear Exhaust system not adequately supported \|7.1.1\|	1089
Nearside Headlamp not working on dipped beam \|1.7.5a\|	1039
Registration plate issues	1003
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	878
Offside Headlamp not working on dipped beam \|1.7.5a\|	874
Rear brake binding	826
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	793
Nearside Front Front position lamp\|s\| not working \|1.1.A.3b\|	790
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	757
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.4.G.2\|	645
Parking brake lever has no reserve travel \|3.1.6b\|	592
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.4.G.2\|	576
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.4.G.2\|	523
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.4.G.2\|	519
Nearside Stop lamp not working \|1.2.1b\|	516
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.4.G.2\|	492
Offside Stop lamp not working \|1.2.1b\|	461
Front brake application uneven	457
Offside front brake binding \|3.7.B.1\|	447
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.4.G.2\|	431
Nearside Front Headlamp not working on dipped beam \|1.7.5a\|	423
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits \|7.3.D.3\|	377
Supplementary Restraint System warning lamp indicates a fault \|5.4.2\|	361
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.4.G.2\|	350
Offside Front Headlamp not working on dipped beam \|1.7.5a\|	329
Exhaust system not adequately supported \|7.1.1\|	325
Nearside front brake binding \|3.7.B.1\|	323
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.4.G.2\|	301
Offside Rear coil spring broken \|2.4.C.1a\|	297
Front brake disc in such a condition that it is seriously weakened	296
Rear brake application uneven	268
Rear brake disc in such a condition that it is seriously weakened	264
Centre Stop lamp not working \|1.2.1b\|	259
Offside Front front brake binding \|3.7.B.1\|	246
Battery insecure \|1.9.1\|	245
Parking brake efficiency below requirements (1.4.2 (a) (i))	239
Nearside Rear Stop lamp not working \|1.2.1b\|	226
Parking brake efficiency below requirements \|1.4.2 \|a\| \|i\|\|	222
Nearside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.4.G.2\|	218
Exhaust emissions carbon monoxide content after 2nd fast idle excessive \|7.3.D.3\|	216
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill \|2.4.A.3\|	212
Front brake excessively fluctuating	202
Offside Rear Wheel nut\|s\| missing \|4.2.A.1e\|	201
Nearside Rear coil spring broken \|2.4.C.1a\|	201
Offside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	196
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill \|2.4.A.3\|	194
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` \|8.3.1e\|	191
Nearside Front Position lamp not working (4.2.1 (a) (ii))	190
Windscreen has damage	188
Offside Front Position lamp not working (4.2.1 (a) (ii))	188
Offside Rear Stop lamp not working \|1.2.1b\|	182
Offside Front Wheel nut\|s\| missing \|4.2.A.1e\|	180
Nearside Front coil spring broken \|2.4.C.1a\|	177
Windscreen wiper blade insecure	176
Offside Front Anti-roll bar linkage has excessive play in a ball joint \|2.4.G.2\|	172
Nearside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	169
Mechanical brake component has restricted free movement	166
Nearside Front front brake binding \|3.7.B.1\|	161
Front position lamp\|s\| not working \|1.1.A.3b\|	159
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	152
Nearside Front Position lamp not working \|4.2.1 \|a\|\|	150
Offside Rear Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.4.G.2\|	148
Nearside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	148
Brake hose has insufficient room to move	147
Anti-lock braking system warning lamp indicates an ABS fault	146
Offside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	144
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	142
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	141
Service brake: efficiency below requirements \|3.7.B.7\|	140
Offside Headlamp not working on main beam \|1.7.5a\|	140
Nearside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	137
Offside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	133
Nearside Front Wheel nut\|s\| missing \|4.2.A.1e\|	129
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill \|2.4.A.3\|	125
Rear Mechanical brake component has restricted free movement	124
Offside Front Position lamp not working \|4.2.1 \|a\|\|	122
Nearside Front Anti-roll bar linkage has excessive play in a ball joint \|2.4.G.2\|	118
Brake hose damaged	117
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	115
Nearside Rear Wheel nut\|s\| missing \|4.2.A.1e\|	115
Exhaust emissions carbon monoxide content at idle excessive \|7.3.D.4\|	113
Offside Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	111
Offside Rear Exhaust system not adequately supported \|7.1.1\|	109
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill \|2.4.A.3\|	109
Nearside Rear Suspension arm corroded and seriously weakened \|2.4.G.1\|	108

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

MOT History from tests of petrol MAZDA MAZDA6s year 2004

Find us on Facebook