Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 14 |
Headlamp aim out of alignment | 6 |
Rear fog lamp not working |1.3.2b| | 6 |
Registration plate lamp issues | 5 |
Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 3 |
Offside Stop lamp not working |1.2.1b| | 3 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 2 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Windscreen has damage | 2 |
Rear fog lamp switch missing |1.3.1a| | 2 |
Nearside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 2 |
Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 2 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 2 |
Registration plate issues | 2 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 2 |
Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Rear fog lamp missing |1.3.2a| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Rear brake binding | 2 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Front Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement D bush |2.4.G.2| | 1 |
Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement D bush |2.4.G.2| | 1 |
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D bush |2.4.G.2| | 1 |
Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Headlamp insecure Headlamp mount broken |4.1.1 |c|| | 1 |
Nearside Front Headlamp insecure Mount broken |4.1.1 |c|| | 1 |
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill corroded and holed |6.1.1 |c| |i|| | 1 |
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill Corroded and holed |6.1.1 |c| |i|| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis box section above spring top mount. |5.3.6 |a| |i|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis box section above spring top mount. |5.3.6 |a| |i|| | 1 |
Rear Service brake excessively binding Both sides |1.2.1 |f|| | 1 |
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner wheel arch corroded and holed |7.1.1 |a| |i|| | 1 |
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
Central Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside outer sill holed and corroded central .. |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis excessively corroded |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear inner sill holed over wheel arch |6.1.B.2| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill holed and corroded |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill holed and corroded |6.1.B.2| | 1 |
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Rear fog lamp likely to become detached (4.5.1 (c) (ii)) | 1 |
Rear fog lamp with a multiple light source more than 1/2 not functioning (4.5.1 (a) (ii)) | 1 |
Windscreen washer not working | 1 |
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill near rear trailing arm mount (5.3.6 (a) (i)) | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
Exhaust has a major leak of exhaust gases back box split open (6.1.2 (a)) | 1 |
Anti-lock braking system warning lamp indicates an ABS fault | 1 |
Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Rear fog lamp with a multiple light source more than 1/2 not functioning |4.5.1 |a| |ii|| | 1 |
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of offside inner / outer sill |5.3.6 |a| |i|| | 1 |
Fluid leak harmful to the environment or a risk to other road users fuel pump |8.4.1 |a| |i|| | 1 |
Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Inner Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Nearside Inner Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Outer Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Inner Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Outer Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 1 |
Battery insecure |1.9.1| | 1 |
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting x-member |6.6.6| | 1 |
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting x-member |6.6.6| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded arch |2.4.A.3| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded arch |5.2.6| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded arch |5.2.6| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded arch |5.2.6| | 1 |
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box member near step (5.3.6 (a) (i)) | 1 |
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced step / sill (7.1.1 (a) (i)) | 1 |
Nearside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Rear fog lamp does not emit a steady red light |1.3.2e| | 1 |
Centre Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Offside Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Offside Rear Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill to chassis (6.1.1 (c) (ii)) | 1 |
Horn not working |1.6.2a| | 1 |
Supplementary Restraint System warning lamp indicates a fault |5.4.2| | 1 |
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Rear brake disc contaminated by oil |3.5.1h| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Nearside Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner body sill area. |5.3.6 |a| |i|| | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner body sill area. |5.3.6 |a| |i|| | 1 |
Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
Nearside Rear Position lamp showing white light to the rear |4.2.3 |a| |ii|| | 1 |
Nearside Rear Stop lamp|s| showing white light to the rear |4.3.3 |a| |ii|| | 1 |
Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Nearside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
Nearside Rear Stop lamp(s) showing white light to the rear (4.3.3 (a) (ii)) | 1 |
Offside Rear Inner Position lamp not working (4.2.1 (a) (ii)) | 1 |
Anti-roll bar pin or bush excessively worn nearside rear inner D bush (5.3.4 (a) (i)) | 1 |
Anti-roll bar pin or bush excessively worn offside rear inner D bush (5.3.4 (a) (i)) | 1 |
Offside Rear fog lamp obviously incorrectly positioned |1.3.2a| | 1 |
Nearside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 1 |
Offside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded box section adj to suspension mounting |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 1 |
Front Battery insecure both batterys n/s and o/s front |1.9.1| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded box adj to shock absorber mounting |2.4.A.3| | 1 |
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded front box section adj to suspension mounting |2.4.A.3| | 1 |
Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Centre Stop lamp not working |1.2.1b| | 1 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |