Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 23 |
Offside Rear fog lamp not working |1.3.2b| | 9 |
Registration plate lamp issues | 8 |
Rear fog lamp not working |1.3.2b| | 6 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 6 |
Offside Rear fog lamp missing |1.3.2a| | 6 |
Headlamp aim out of alignment | 4 |
Offside front brake binding |3.7.B.1| | 3 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Rear fog lamp switch missing |1.3.1a| | 3 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Rear fog lamp tell tale not working |1.3.1b| | 3 |
Nearside front brake binding |3.7.B.1| | 2 |
Battery insecure |1.9.1| | 2 |
Anti-lock braking system warning lamp indicates an ABS fault | 2 |
Nearside Steering rack gaiter split |2.2.D.2d| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded Outer sill |2.4.A.3| | 2 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded Outer sill |5.2.6| | 2 |
Offside Front Position lamp not working |4.2.1 |a|| | 2 |
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 2 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 2 |
Nearside Side repeater not working |1.4.A.2c| | 2 |
Offside Rear fog lamp insecure |1.3.2a| | 2 |
Horn not working |1.6.2a| | 2 |
Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Offside Rear Stop lamp not working |1.2.1b| | 2 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 2 |
Centre Stop lamp not working |1.2.1b| | 2 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Centre Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Rear parking brake recording little or no effort | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Battery insecure |1.9.1| | 1 |
Nearside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Battery insecure |1.9.1| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded Inner arch |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 1 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Power steering ram|s| leaking from a failed seal |2.3.3b| | 1 |
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Front Upper Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Upper Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Position lamp not working |4.2.1 |a|| | 1 |
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 1 |
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill |7.1.1 |a| |i|| | 1 |
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill |7.1.1 |a| |i|| | 1 |
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Front cross member |6.1.1 |c| |i|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Battery tray |5.3.6 |a| |i|| | 1 |
Nearside Front Inner Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded out-rigger inner sill |2.4.A.3| | 1 |
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
Rear Exhaust has a major leak of exhaust gases silencer |7.1.2| | 1 |
Nearside Rear Outer Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Rear Outer Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Offside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill
|2.4.A.3| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both inner and outer sill and n/s/r arch (5.3.6 (a) (i)) | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Front front brake binding |3.7.B.1| | 1 |
Rear Rear fog lamp not working |1.3.2b| | 1 |
Offside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Offside Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Nearside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front Obligatory mirror missing |8.1.1| | 1 |
Offside Rear Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Offside Rear Suspension arm severely distorted |2.4.G.1| | 1 |
Offside Front Brake hose stretched |found during steering lock to lock check| |2.2.D.2b| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Central Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
Nearside Rear fog lamp not working |1.3.2b| | 1 |
Offside Front Brake hose stretched |3.6.B.4c| | 1 |
Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Rear fog lamp emits a light other than red |1.3.2e| | 1 |
Windscreen washer not working | 1 |
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Offside Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 1 |
Offside Rear Rear position lamp|s| incomplete |1.1.4a| | 1 |
Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
Offside Front brake disc excessively pitted |3.5.1h| | 1 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Central Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Front Direction indicator insecure |1.4.A.2b| | 1 |
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount |marked in yellow| |5.3.6 |a| |i|| | 1 |
Front Prop shaft joint excessively worn |6.1.7 |c| |i|| | 1 |
Fuel tank leaking |6.1.3 |b| |i|| | 1 |
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength Outer sill |5.3.6 |a| |i|| | 1 |
Offside Front Brake pipe inadequately supported |3.6.B.1| | 1 |
Nearside Rear Statutory seat belt missing |5.1.1| | 1 |
Offside Rear Statutory seat belt missing |5.1.1| | 1 |
Front brake application uneven | 1 |
Fuel tank insecure |7.2.1| | 1 |
Nearside Front constant velocity joint is excessively worn |2.5.C.1b| | 1 |
Nearside Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Battery insecure leisure battery |1.9.1| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded inner and outer sill |5.2.6| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded inner and outer sill |2.4.A.3| | 1 |
Nearside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Centre Upper Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Stop lamp has less than 50% of the light sources illuminating |1.2.1b| | 1 |
Nearside Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded Chassis |2.4.A.3| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded Front inner sill |5.2.6| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Centre Statutory seat belt missing |5.1.1| | 1 |
Battery insecure and likely to cause a short circuit |4.13 |a| |ii|| | 1 |
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL HAS CORRODED AND HOLED |6.1.1 |c| |i|| | 1 |
Nearside Rear Anti-roll bar pin or bush excessively worn D BUSH |5.3.4 |a| |i|| | 1 |
Offside Rear Anti-roll bar pin or bush excessively worn D BUSH |5.3.4 |a| |i|| | 1 |
Nearside Front Shock absorbers has a serious fluid leak | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
Offside Rear Towbar excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Exhaust fumes causing a danger to health of persons on board rear tail pipe missing |6.1.2 |b| |ii|| | 1 |
Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Nearside Inner Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Outer Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Inner Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Rear fog lamp insecure |1.3.2a| | 1 |
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear fog lamp not visible from a reasonable distance |1.1.6b| | 1 |
Rear fog lamp emits a light other than red |1.3.2e| | 1 |
Nearside Front Tie bar/rod ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 1 |
Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Offside Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance |1.3.2d| | 1 |
Front Suspension component mounting prescribed area is excessively corroded cross member |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Power steering component|s| leaking rack |2.3.3b| | 1 |
Nearside Front Subframe mounting prescribed area is fractured |2.4.A.3| | 1 |
Nearside Front Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Rear fog lamp does not face the rear |1.3.2a| | 1 |
Nearside Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 1 |
Trailer electrical socket insecure |1.9.3a| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Rear fog lamp missing |1.3.2a| | 1 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Offside Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed |7.1.1 |a| |i|| | 1 |
Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed |5.3.6 |a| |i|| | 1 |
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength cross member holed |5.3.6 |a| |i|| | 1 |
Nearside Rear Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end plate holed |5.3.6 |a| |i|| | 1 |
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 1 |
Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 1 |
Nearside Rear Seat belt retracting mechanism defective |5.2.5b| | 1 |
Nearside Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 1 |
Offside Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 1 |
Offside Inner Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Offside Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |