Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 70 |
Registration plate lamp issues | 23 |
Headlamp aim out of alignment | 18 |
Offside Rear fog lamp not working |1.3.2b| | 16 |
Exhaust has a major leak of exhaust gases |7.1.2| | 14 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 14 |
Rear fog lamp not working |1.3.2b| | 13 |
Horn not working |1.6.2a| | 12 |
Offside Stop lamp not working |1.2.1b| | 11 |
Nearside Stop lamp not working |1.2.1b| | 9 |
Offside Front position lamp|s| not working |1.1.A.3b| | 8 |
Nearside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 7 |
Offside Rear fog lamp missing |1.3.2a| | 7 |
Anti-lock braking system warning lamp indicates an ABS fault | 7 |
Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 6 |
Rear fog lamp tell tale not working |1.3.1b| | 6 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 6 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 6 |
Brake pipe excessively corroded | 6 |
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 5 |
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 5 |
Rear fog lamp not working (4.5.1 (a) (ii)) | 5 |
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 5 |
Battery insecure |1.9.1| | 4 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Registration plate issues | 4 |
Service brake: efficiency below requirements |3.7.B.7| | 4 |
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 4 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 4 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 4 |
Rear Statutory seat belt missing |5.1.1| | 4 |
Offside Rear Rear fog lamp not working |1.3.2b| | 4 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 4 |
Rear fog lamp switch missing |1.3.1a| | 4 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 4 |
Offside Rear Stop lamp not working |1.2.1b| | 4 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 3 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
Offside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 3 |
Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 3 |
Emissions not tested |7.0| | 3 |
Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 3 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Offside Rear fog lamp emits a light other than red |1.3.2e| | 3 |
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 3 |
Offside Rear brake disc contaminated by oil |3.5.1h| | 3 |
Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 3 |
Windscreen wiper blade insecure | 3 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 3 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Rear Stop lamp not working |1.2.1b| | 3 |
Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 3 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 3 |
Nearside Headlamp not working on main beam |1.7.5a| | 3 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
Rear fog lamp missing |1.3.2a| | 3 |
Rear Rear fog lamp not working |1.3.2b| | 3 |
Steering rack insecure |2.2.B.1a| | 2 |
Offside Front Inner Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 2 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 2 |
Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 2 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 2 |
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
Windscreen has damage | 2 |
Offside Rear fog lamp insecure |1.3.2a| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
Fuel system component leaking |7.2.3| | 2 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 2 |
Rear brake binding | 2 |
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Nearside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i|| | 2 |
Offside Rear Lower Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i)) | 2 |
Nearside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 2 |
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 2 |
Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
Offside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 2 |
Nearside Rear Anti-roll bar linkage fractured |2.4.G.1| | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
Offside Rear Anti-roll bar linkage fractured |2.4.G.1| | 2 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 2 |
Nearside Front Lower Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 2 |
Centre Stop lamp not working |1.2.1b| | 2 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Rear fog lamp not working |4.5.1 |a| |ii|| | 2 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Rear fog lamp missing |4.5.1 |a| |ii|| | 2 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 2 |
Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area |6.1.1 |c| |i|| | 2 |
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area |6.1.1 |c| |i|| | 2 |
Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area |6.1.1 |c| |i|| | 2 |
Offside Front Headlamp has a product on the lens so that the light output is severely reduced |4.1.4 |b|| | 2 |
Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 2 |
Offside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 2 |
Offside Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 2 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 2 |
Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 2 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f)) | 2 |
Offside Rear Service brake excessively binding (1.2.1 (f)) | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
Nearside Rear Service brake excessively binding (1.2.1 (f)) | 2 |
Centre Rear Statutory seat belt missing |5.1.1| | 2 |
Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Lower Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded lower front panel |2.4.A.3| | 1 |
Rear fog lamp excessively damaged so that it is not visible from a reasonable distance |1.3.2d| | 1 |
Power steering fluid level below minimum |2.3.1| | 1 |
Power steering malfunctioning |2.3.3a| | 1 |
Brakes imbalanced across an axle | 1 |
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Nearside Headlamp aim not tested (4.1.2 (b)) | 1 |
Offside Headlamp aim not tested (4.1.2 (b)) | 1 |
Nearside Rear Body panel damaged and likely to cause injury (6.2.1 (a) (i)) | 1 |
Rear fog lamp tell-tale not working not visable from normal driving position (4.9.1 (a) (ii)) | 1 |
Offside Front Suspension arm insecure |2.4.G.1| | 1 |
Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Front Seat belt webbing significantly weakened (7.1.2 (b) (ii)) | 1 |
Rear Exhaust has a major leak of exhaust gases mid (6.1.2 (a)) | 1 |
Offside Rear Body component corroded and likely to cause injury arch (6.2.1 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
Nearside Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.4.B.1| | 1 |
Front brake excessively fluctuating | 1 |
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Nearside Steering linkage ball joint ball joint dust cover insecure so that it no longer prevents the ingress of dirt track rod end |2.1.3 |g| |ii|| | 1 |
Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear end inner sill area |5.3.6 |a| |i|| | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement D bush |2.4.G.2| | 1 |
Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement D bush |2.4.G.2| | 1 |
Exhaust emissions likely to be affected by an exhaust leak rear flexible section |8.2.2.1 |b|| | 1 |
Nearside Front Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 1 |
Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement across axle |2.4.G.2| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength multiple areas |5.3.6 |a| |i|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength multiple areas |5.3.6 |a| |i|| | 1 |
Offside Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Anti-roll bar has excessive play in a pin/bush d bushes on rear axle |2.4.G.2| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 1 |
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
Offside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Windscreen in such a condition that visibility through swept area is seriously affected cracked |3.2 |c| |ii|| | 1 |
Parking brake lever has excessive movement indicating incorrect adjustment needs ajustment |1.1.6 |c|| | 1 |
Windscreen washer not working | 1 |
Nearside Inner Seat belt anchorage prescribed area is severely distorted |5.2.6| | 1 |
Rear Service brake grabbing severely |3.7.C.2| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Front Inner Subframe mounting prescribed area is excessively corroded sill outrigger |2.4.A.3| | 1 |
Fuel cap/sealing device missing |7.2.4a| | 1 |
Battery insecure and likely to cause a short circuit |4.13 |a| |ii|| | 1 |
Exhaust emissions exceed level of metered smoke for a turbo charged engine |8.2.2.2 |b|| | 1 |
Nearside Obligatory mirror insecure |8.1.1| | 1 |
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Offside Stop lamp emits other than a steady red light |1.2.1e| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Brake pump leaking |3.6.A.1| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Nearside Rear Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Nearside Front Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Offside Front Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Offside Rear Brake disc contaminated |1.1.14 |b|| | 1 |
Supplementary Restraint System warning lamp indicates a fault |5.4.2| | 1 |
Rear Exhaust system not adequately supported silencer insecure |7.1.1| | 1 |
Central Stop lamp(s) light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i)) | 1 |
Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end panel and strengthening rib, outer sill not attached to inner sill (5.3.6 (a) (i)) | 1 |
Nearside Steering rack gaiter insecure |2.2.D.2d| | 1 |
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Upper Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Towbar attachment insecure fixing bolts missing (6.1.6 (c) (i)) | 1 |
Service brake efficiency less than 50% of the required value |1.2.2 |a| |ii|| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Offside Rear Rear fog lamp insecure |1.3.2a| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Front Body has a sharp edge caused by damage bumper area |6.1.C.1| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 1 |
Offside Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 1 |
Central Stop lamp not working |1.2.1b| | 1 |
Nearside Front Lower Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Centre Exhaust has a major leak of exhaust gases flexible joint |7.1.2| | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded Inner sill |2.4.A.3| | 1 |
Power steering component|s| leaking Steering rack/pipes |2.3.3b| | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Front brake application uneven | 1 |
Rear Rear fog lamp does not face the rear |1.3.2a| | 1 |
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill. |2.4.A.3| | 1 |
Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Offside Front Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Offside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Front Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 1 |
Nearside Front All position lamps not working |1.1.A.3b| | 1 |
Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a| | 1 |
Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Nearside Rear Upper Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i)) | 1 |
Offside Rear Upper Anti-roll bar pin or bush excessively worn d bush (5.3.4 (a) (i)) | 1 |
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under wheel arch (6.2.2 (d) (i)) | 1 |
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under wheel arch (6.2.2 (d) (i)) | 1 |
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under wheel arch (6.2.2 (d) (i)) | 1 |
Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i)) | 1 |
Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill holed |6.1.B.2| | 1 |
Central Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 1 |
Rear Upper Exhaust has a major leak of exhaust gases and cracked |7.1.2| | 1 |
Nearside Front Headlamp aim not tested |1.8.A.1c| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Headlamp not working on dipped beam both |1.7.5a| | 1 |
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded to outer sill |2.4.A.3| | 1 |
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting crossmember |6.6.6| | 1 |
Stop lamp not working all intermittently not working |switch| |1.2.1b| | 1 |
Nearside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
Fuel cap/sealing device ineffective (6.1.3 (b) (i)) | 1 |
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Rear Lower Suspension arm locating pin insecure |2.4.G.3a| | 1 |
Rear Rear fog lamp missing |1.3.2a| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Offside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Fuel cap/sealing device does not fasten securely by positive means emergency type fitted |7.2.4b| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Nearside Rear Body insecure and dangerous to other road users bumper |6.1.B.1b| | 1 |
Rear brake application uneven | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Front Upper Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
Anti-lock braking system warning lamp does not illuminate |3.4.1b| | 1 |
Offside Rear Integral body structure has excessive corrosion which adversely affects braking or steering in sill |6.1.1 |c| |ii|| | 1 |
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced centre inner sill |6.1.1 |c| |i|| | 1 |
Nearside Front Integral body structure has excessive corrosion which adversely affects braking or steering cross member x2 |6.1.1 |c| |ii|| | 1 |
Nearside Rear Direction indicators incorrect colour |1.4.A.2f| | 1 |
Central Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member holed (6.1.1 (c) (i)) | 1 |
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i)) | 1 |
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill holed (6.1.1 (c) (i)) | 1 |
Nearside Rear Brake disc significantly and obviously worn pitted (1.1.14 (a) (i)) | 1 |
Offside Rear Brake disc significantly and obviously worn pitted (1.1.14 (a) (i)) | 1 |
Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill area |5.3.6 |a| |i|| | 1 |
Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Nearside Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Central Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill. |6.1.B.2| | 1 |
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 1 |
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 1 |
Rear Rear fog lamp does not emit a steady red light |4.5.4 |a|| | 1 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion Wheel arch |6.1.C.1| | 1 |
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Rear Anti-roll bar attachment bracket/mounting insecure Bracket broken |2.4.G.1| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer sill |6.1.B.2| | 1 |
All position lamps not working |1.1.A.3b| | 1 |
Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Central Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Nearside Front suspension has excessive movement at a suspension ball joint |2.5.A.1c| | 1 |
Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
Offside Front Lower Ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Nearside Front Outer Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Rear fog lamp emits a light other than red |1.3.2e| | 1 |
Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Offside Power steering component|s| leaking rack |2.3.3b| | 1 |
Nearside Headlamp light intensity severely reduced on dip and main beam`s |4.1.4 |a|| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheelarch |5.3.6 |a| |i|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength cross-member |5.3.6 |a| |i|| | 1 |
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength cross-member |5.3.6 |a| |i|| | 1 |
Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
Nearside Rear Lower Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Rear Lower Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Offside Rear Body component corroded and likely to cause injury Outer wheelarch (6.2.1 (a) (i)) | 1 |
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Front of inner wheelarch (7.1.1 (a) (i)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheelarch (5.3.6 (a) (i)) | 1 |
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Nearside Lower Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
Lower Steering column universal joint has excessive play |2.1.5| | 1 |
Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 1 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 1 |
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 1 |
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 1 |
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 1 |
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 1 |
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 1 |
Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill |6.2.2 |d| |i|| | 1 |
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross member |6.2.2 |d| |i|| | 1 |
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross member |6.2.2 |d| |i|| | 1 |
Offside Front Inner Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Offside Rear Rear fog lamp does not emit a steady red light |4.5.4 |a|| | 1 |
Rear fog lamp switch inoperative (4.5.3 (a) (ii)) | 1 |
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i)) | 1 |
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Outer sill (7.1.1 (a) (i)) | 1 |
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill x2 holes (7.1.1 (a) (i)) | 1 |
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill x2 holes (7.1.1 (a) (i)) | 1 |
Offside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger towards the front of the axle (5.3.6 (a) (i)) | 1 |
Headlamps matched pair are not the same colour |1.7.6| | 1 |
Nearside Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Inner Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Inner Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i)) | 1 |
Nearside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i)) | 1 |
Rear Bumper insecure (6.1.4 (a) (i)) | 1 |
Nearside Rear Position lamp likely to become detached (4.2.1 (c) (ii)) | 1 |
Nearside Headlamp lens seriously defective beam pattern affected (4.1.1 (b) (ii)) | 1 |
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside and offside inner and outer (5.3.6 (a) (i)) | 1 |
Offside Front Anti-roll bar linkage ball joint likely to become detached already detached (5.3.4 (a) (ii)) | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength top mount prescribed (5.3.6 (a) (i)) | 1 |
Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside and offside crossmember (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner outer and end sill (5.3.6 (a) (i)) | 1 |
Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt nearside and offside (2.1.3 (g) (ii)) | 1 |
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting inner and outer body (6.1.6 (i) (i)) | 1 |
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting inner and outer body (6.1.6 (i) (i)) | 1 |
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced central sill (7.1.1 (a) (i)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Offside Rear Anti-roll bar linkage pin or bush likely to become detached not attachatched |5.3.4 |a| |ii|| | 1 |
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Offside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Nearside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 1 |
Offside Rear Body has a sharp edge caused by corrosion wheel arch |6.1.C.1| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Front position lamp|s| not working side lamp |1.1.A.3b| | 1 |
Rear Upper Stop lamp(s) with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii)) | 1 |
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill section within 30 cm of n/s middle passenger seatbelt mount (7.1.1 (a) (i)) | 1 |
Offside Rear Upper Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced A post / roof section (7.1.1 (a) (i)) | 1 |
Exhaust emits excessive smoke or vapour likely to obscure the vision of other road users (8.2.2.2 (c)) | 1 |
Rear fog lamp does not face the rear (4.5.4 (a)) | 1 |
Nearside Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Rear fog lamp light intensity significantly reduced |4.5.4 |a|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/floor |5.3.6 |a| |i|| | 1 |
Exhaust has a major leak of exhaust gases flexi pipe |6.1.2 |a|| | 1 |
Emissions not tested |8.2.2.2 |e|| | 1 |
Nearside Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Offside Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Mechanical brake component has restricted free movement | 1 |
Rear Exhaust has a major leak of exhaust gases silencer |6.1.2 |a|| | 1 |
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Offside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Offside Rear Rear fog lamp missing |1.3.2a| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt drop link |2.4.G.2| | 1 |
Offside Front Anti-roll bar has excessive play in a ball joint drop link |2.4.G.2| | 1 |
Offside Front Shock absorbers has a serious fluid leak | 1 |
Offside Front Lower Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Nearside Obligatory mirror insecure |3.3 |b| |ii|| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Nearside Front All direction indicators obviously incorrectly positioned |4.4.3 |a|| | 1 |
Offside Front All direction indicators obviously incorrectly positioned |4.4.3 |a|| | 1 |
Nearside Windscreen wiper blade missing |3.4 |b| |ii|| | 1 |
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Central Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front lower cross member corroded/hole with in 30cm of suspension mountings (5.3.6 (a) (i)) | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength offside rear inner sill corroded/hole with in 30cm of suspension mounting. (5.3.6 (a) (i)) | 1 |
Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt both front suspension arm ball joint dust covers (5.3.4 (b) (ii)) | 1 |
Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner & outer sill |2.4.A.3| | 1 |
Offside Front Steering component mounting prescribed area is excessively corroded inner wing/bulkhead |2.2.C.1h| | 1 |
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/back of the sill (5.3.6 (a) (i)) | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Outer Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
Rear Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis member corroded 3 places (6.1.1 (c) (i)) | 1 |
Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength nearside and offside |5.3.6 |a| |i|| | 1 |
Offside Rear Body panel damaged and likely to cause injury |6.2.1 |a| |i|| | 1 |
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Front crossmember @chassis (6.1.1 (c) (i)) | 1 |
Rear Anti-roll bar pin or bush excessively worn Nearside and offside (5.3.4 (a) (i)) | 1 |
Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Nearside Front Upper Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
Rear Service brake excessively binding |1.2.1 |f|| | 1 |
Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Rear Rear fog lamp switch inoperative |4.5.3 |a| |ii|| | 1 |
Nearside Inner Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Statutory seat belt missing |5.1.1| | 1 |
Offside Rear Statutory seat belt missing |5.1.1| | 1 |
Rear fog lamp does not emit a steady red light |4.5.4 |a|| | 1 |
Offside Front Lower Suspension arm pin or bush excessively worn rear most bush |5.3.4 |a| |i|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength inner sill strengthening rib |5.3.6 |a| |i|| | 1 |
Offside Front Service brake excessively binding |1.2.1 |f|| | 1 |
Rear Parking brake lever has no reserve travel |3.1.6b| | 1 |
Rear fog lamp does not emit a steady red light (4.5.4 (a)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i)) | 1 |
Nearside Rear Brake drum contaminated (1.1.14 (b)) | 1 |
Nearside Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Outer Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front Position lamp not working |4.2.1 |a|| | 1 |
Offside Rear Electrical wiring heavily deteriorated |4.11 |b| |ii|| | 1 |
Offside Rear Electrical wiring likely to drag on the ground tow bar socket |4.11 |a| |iii|| | 1 |
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outter sill |7.1.1 |a| |i|| | 1 |
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced under sill x2 |7.1.1 |a| |i|| | 1 |
Centre Statutory seat belt missing |5.1.1| | 1 |
Horn not working (7.7 (a)) | 1 |
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 1 |
Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 1 |
Nearside Front Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Offside Front Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Centre Rear fog lamp missing |1.3.2a| | 1 |