Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 73 |
Registration plate lamp issues | 43 |
Headlamp aim out of alignment | 42 |
Offside Rear fog lamp not working |1.3.2b| | 34 |
Nearside Stop lamp not working |1.2.1b| | 21 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 18 |
Exhaust has a major leak of exhaust gases |7.1.2| | 17 |
Rear fog lamp not working |1.3.2b| | 17 |
Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 17 |
Offside Front position lamp|s| not working |1.1.A.3b| | 15 |
Brake pipe excessively corroded | 14 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 14 |
Rear fog lamp tell tale not working |1.3.1b| | 14 |
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 14 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 13 |
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 12 |
Offside Stop lamp not working |1.2.1b| | 12 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 11 |
Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 11 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 10 |
Battery insecure |1.9.1| | 10 |
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 9 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 9 |
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 9 |
Offside Rear Rear fog lamp not working |1.3.2b| | 9 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
Offside Rear fog lamp missing |1.3.2a| | 8 |
Offside Rear Rear fog lamp missing |1.3.2a| | 8 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 7 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 7 |
Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 7 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 6 |
Offside Headlamp not working on dipped beam |1.7.5a| | 6 |
Brakes imbalanced across an axle | 6 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 6 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 6 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Horn not working |1.6.2a| | 6 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 6 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 6 |
Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 6 |
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 6 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Power steering component|s| leaking |2.3.3b| | 5 |
Parking brake lever has no reserve travel |3.1.6b| | 5 |
Nearside Steering rack gaiter split |2.2.D.2d| | 5 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 5 |
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Nearside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 5 |
Offside Headlamp not working on main beam |1.7.5a| | 5 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 5 |
Nearside Rear Stop lamp not working |1.2.1b| | 5 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Windscreen has damage | 4 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 4 |
Emissions not tested |7.0| | 4 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 4 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 4 |
Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 4 |
Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 4 |
Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 4 |
Offside Rear fog lamp insecure |1.3.2a| | 4 |
Offside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 4 |
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 4 |
Registration plate issues | 4 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Mechanical brake component has restricted free movement | 3 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 3 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 3 |
Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 3 |
Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 3 |
Nearside Battery insecure |1.9.1| | 3 |
Offside Battery insecure |1.9.1| | 3 |
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 3 |
Windscreen washer not working | 3 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Offside Rear brake disc excessively pitted |3.5.1h| | 3 |
Rear fog lamp switch missing |1.3.1a| | 3 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 3 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Front front brake binding |3.7.B.1| | 3 |
Offside front brake binding |3.7.B.1| | 3 |
Fuel system component leaking |7.2.3| | 3 |
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 3 |
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 3 |
Nearside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 3 |
Front brake disc in such a condition that it is seriously weakened | 3 |
Parking brake: efficiency below requirements |3.7.C.1b| | 3 |
Anti-lock braking system warning lamp indicates an ABS fault | 3 |
Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 3 |
Rear fog lamp switch faulty |1.3.1a| | 3 |
Power steering pipe|s| or hose|s| leaking |2.3.3b| | 3 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Rear brake disc contaminated by oil |3.5.1h| | 3 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 3 |
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 3 |
Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 3 |
Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 3 |
Nearside front brake binding |3.7.B.1| | 3 |
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 3 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 3 |
Rear fog lamp missing |1.3.2a| | 3 |
Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 3 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
An item not tested |Manual| | 2 |
Nearside Side repeater not working |1.4.A.2c| | 2 |
Offside Rear Anti-roll bar insecure |2.4.G.1| | 2 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Inner Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 2 |
Offside Inner Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 2 |
Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 2 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 2 |
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Nearside Front Position lamp not working |4.2.1 |a|| | 2 |
Offside Front Service brake excessively binding (1.2.1 (f)) | 2 |
Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 2 |
Steering system excessively tight |2.2.D.1| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
Offside Front front brake binding |3.7.B.1| | 2 |
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement D bush |2.4.G.2| | 2 |
Emissions not tested |7.3.A.1| | 2 |
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Offside Front Lower Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 2 |
Offside Front brake disc excessively scored |3.5.1h| | 2 |
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 2 |
Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Nearside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 2 |
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Offside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 2 |
Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 2 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2| | 2 |
Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2| | 2 |
Nearside Rear Anti-roll bar attachment bracket/mounting cracked |2.4.G.1| | 2 |
Offside Rear Anti-roll bar attachment bracket/mounting cracked |2.4.G.1| | 2 |
Nearside Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 2 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Offside rear brake recording little or no effort |3.7.B.5a| | 2 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 2 |
Offside Rear Stop lamp not working |1.2.1b| | 2 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
Nearside Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 2 |
Offside Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 2 |
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
Rear fog lamp insecure |1.3.2a| | 2 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 2 |
Nearside Headlamp not working on main beam |1.7.5a| | 2 |
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 2 |
Rear brake binding | 2 |
Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 2 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 2 |
Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 2 |
Central Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
Rear fog lamp tell tale missing |1.3.1b| | 2 |
Emissions not tested |7.4.B.1| | 2 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Anti-roll bar linkage insecure |2.4.G.1| | 2 |