>

MOT History from tests of petrol MAZDA DEMIOs year 2003

Review the list of common MAZDA DEMIO failures below or to perform a specific mot history check on your MAZDA then use our popular KnowYourCar service

mot history
Pass percent:70.40%
(The average a petrol MAZDA DEMIO year 2003 passes without issue)
Based on:7,287 MOT Tests
Most common failuresNo# failures
Windscreen wiper does not clear the windscreen effectively512
Headlamp aim out of alignment274
Brake pipe excessively corroded260
Registration plate lamp issues237
Nearside Front position lamp|s| not working |1.1.A.3b|106
Brakes imbalanced across an axle94
Offside Front position lamp|s| not working |1.1.A.3b|89
Rear brake binding84
Supplementary Restraint System warning lamp indicates a fault |5.4.2|78
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|77
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|72
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2|54
Offside front brake binding |3.7.B.1|48
Registration plate issues48
Offside Stop lamp not working |1.2.1b|44
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2|40
Offside Front front brake binding |3.7.B.1|37
Nearside Headlamp not working on dipped beam |1.7.5a|37
Nearside Stop lamp not working |1.2.1b|32
Offside Front Track rod end ball joint has excessive play |2.2.B.1f|32
Parking brake lever has no reserve travel |3.1.6b|30
Nearside front brake binding |3.7.B.1|28
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2|28
Offside Track rod end ball joint has excessive play |2.2.B.1f|27
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a|26
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f|26
Nearside Headlamp not working on main beam |1.7.5a|25
Nearside Track rod end ball joint has excessive play |2.2.B.1f|25
Offside Front Front position lamp|s| not working |1.1.A.3b|24
Parking brake: efficiency below requirements |3.7.B.7|24
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|22
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a|22
Mechanical brake component has restricted free movement21
Offside Headlamp not working on dipped beam |1.7.5a|21
Brake hose excessively deteriorated20
Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3|20
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6|20
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|20
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|19
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))19
Nearside Front Headlamp not working on dipped beam |1.7.5a|19
Offside Rear Stop lamp not working |1.2.1b|18
Nearside Front front brake binding |3.7.B.1|17
Nearside Front Front position lamp|s| not working |1.1.A.3b|17
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2|17
Windscreen wiper blade insecure17
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3|17
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3|16
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|16
Offside Headlamp not working on main beam |1.7.5a|16
Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4|16
Offside Front Position lamp not working (4.2.1 (a) (ii))16
Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|15
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3|15
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6|15
Front brake application uneven15
Offside Front Headlamp not working on dipped beam |1.7.5a|14
Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|14
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3|14
Offside Front wheel bearing rough when rotated |2.5.A.2|14
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|14
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))13
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b|13
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6|13
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|13
Front brake excessively fluctuating13
Rear parking brake recording little or no effort13
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|13
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|13
Nearside Front coil spring broken |2.4.C.1a|12
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|12
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|12
Horn not working |1.6.2a|12
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3|12
Supplementary restraint system warning lamp indicates a fault |7.1.6 |a||11
Windscreen has damage11
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))11
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|11
Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3|11
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|11
Rear brake application uneven11
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))11
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|10
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|10
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3|10
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))10
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))10
Nearside Front Position lamp not working (4.2.1 (a) (ii))10
Nearside Front Position lamp not working |4.2.1 |a||10
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))9
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e|9
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|9
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b|9
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii||9
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|9
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii||9
Service brake: efficiency below requirements |3.7.B.7|9
Nearside Rear Stop lamp not working |1.2.1b|9
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3|8
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||8
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6|8
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3|8
Engine MIL inoperative or indicates a malfunction |8.2.1.2 |h||8
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))8
Nearside Rear Shock absorber has a serious fluid leak |2.7.3|8
Offside Front Windscreen wiper blade deteriorated |8.2.2|8
Front position lamp|s| not working |1.1.A.3b|8
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))8
Nearside Front Headlamp not working on main beam |1.7.5a|8
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|7
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))7
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||7
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|7
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|7
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|7
Rear Mechanical brake component has restricted free movement7
Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b|7
Offside Front Headlamp not working on main beam |1.7.5a|7
Nearside Front Windscreen wiper blade deteriorated |8.2.2|7
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|7
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6|7
Offside Front brake disc excessively pitted |3.5.1h|7

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy