MOT History from tests of petrol MAZDA CAMPERs year 2000

Review the list of common MAZDA CAMPER failures below or to perform a specific mot history check on your MAZDA then use our popular KnowYourCar service

mot history

Pass percent:76.47%

(The average a petrol MAZDA CAMPER year 2000 passes without issue)

Based on:51 MOT Tests

Most common failures	No# failures
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.4.G.2\|	2
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Brake pipe excessively corroded	2
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.2.C.1c\|	1
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.2.C.1c\|	1
Offside Rear fog lamp missing \|1.3.2a\|	1
Service brake efficiency below requirements \|1.2.2 \|a\| \|i\|\|	1
Brakes imbalanced across an axle	1
Registration plate lamp issues	1
Front passenger door cannot be opened from inside the vehicle handle broken \|6.2.B.1b\|	1
Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Offside Rear Rear fog lamp not working \|1.3.2b\|	1
Windscreen wiper does not clear the windscreen effectively	1
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Offside Rear Direction indicator not working \|1.4.A.2c\|	1
Nearside Rear Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill \|6.1.B.2\|	1
Offside Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill \|6.1.B.2\|	1
Nearside Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill \|6.1.B.2\|	1
Nearside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside front brake binding \|3.7.B.1\|	1
Offside Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))	1
Offside Front Service brake excessively binding (1.2.1 (f))	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.4.G.2\|	2
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Brake pipe excessively corroded	2
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.2.C.1c\|	1
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.2.C.1c\|	1
Offside Rear fog lamp missing \|1.3.2a\|	1
Service brake efficiency below requirements \|1.2.2 \|a\| \|i\|\|	1
Brakes imbalanced across an axle	1
Registration plate lamp issues	1
Front passenger door cannot be opened from inside the vehicle handle broken \|6.2.B.1b\|	1
Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Offside Rear Rear fog lamp not working \|1.3.2b\|	1
Windscreen wiper does not clear the windscreen effectively	1
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt \|2.4.G.2\|	1
Offside Rear Direction indicator not working \|1.4.A.2c\|	1
Nearside Rear Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill \|6.1.B.2\|	1
Offside Outer Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill \|6.1.B.2\|	1
Nearside Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Inner Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill \|6.1.B.2\|	1
Nearside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside front brake binding \|3.7.B.1\|	1
Offside Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))	1
Offside Front Service brake excessively binding (1.2.1 (f))	1

MOT History from tests of petrol MAZDA CAMPERs year 2000

Find us on Facebook