>
main menu
Use Web App here >

MOT History from tests of diesel MAZDA CAMPERs year 1995

Review the list of common MAZDA CAMPER failures below or to perform a specific mot history check on your MAZDA then use our popular KnowYourCar service

mot history
Pass percent:55.65%
(The average a diesel MAZDA CAMPER year 1995 passes without issue)
Based on:354 MOT Tests
Most common failuresNo# failures
Windscreen wiper does not clear the windscreen effectively30
Registration plate lamp issues16
Rear fog lamp not working |1.3.2b|13
Offside Rear fog lamp not working |1.3.2b|10
Headlamp aim out of alignment9
Brake pipe excessively corroded9
Rear fog lamp tell tale not working |1.3.1b|8
Exhaust has a major leak of exhaust gases |7.1.2|7
Service brake: efficiency below requirements |3.7.B.7|6
Centre Exhaust has a major leak of exhaust gases |7.1.2|6
Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|6
Offside Stop lamp not working |1.2.1b|5
Nearside Front position lamp|s| not working |1.1.A.3b|5
Horn not working |1.6.2a|5
Offside Front position lamp|s| not working |1.1.A.3b|4
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b|4
Rear fog lamp switch missing |1.3.1a|4
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|4
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|4
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|4
Rear Rear fog lamp not working |1.3.2b|4
Rear parking brake recording little or no effort3
Offside Rear Rear fog lamp missing |1.3.2a|3
Offside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1|3
Parking brake: efficiency below requirements |3.7.B.7|3
Emissions not tested |7.0|3
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6|3
Registration plate issues3
Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2|3
Stop lamp not working |1.2.1b|3
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2|3
Rear fog lamp missing |1.3.2a|3
Offside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|3
Offside Rear wheel cylinder leaking |3.6.A.1|2
Nearside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1|2
Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2|2
Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2|2
Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2|2
Offside Front Front position lamp|s| not working |1.1.A.3b|2
Parking brake: efficiency below requirements |3.7.C.1b|2
Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2|2
Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|2
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Nearside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2|2
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a|2
Offside Rear fog lamp missing |1.3.2a|2
Rear Exhaust has a major leak of exhaust gases |7.1.2|2
Offside Rear fog lamp does not emit a steady red light |1.3.2e|2
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|2
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Rear fog lamp not working |4.5.1 |a| |ii||2
Nearside Front Shock absorber has a serious fluid leak |2.7.3|2
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e|2
Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|2
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|2
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii||2
Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2|2
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|2
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|2
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|2
Fuel system component leaking |7.2.3|2
Nearside Headlamp not working on dipped beam |1.7.5a|2
Offside Rear Anti-roll bar attachment bracket/mounting fractured |2.4.G.1|2
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2|2
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b|2
Brakes imbalanced across an axle2
Offside Rear fog lamp insecure |1.3.2a|2
Offside Front Seat belt insecurely fixed to the vehicles structure |5.2.1a|2
Nearside Front Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1|2
Offside Front Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1|2
Exhaust has part of the system excessively deteriorated |7.1.1a|2
Nearside Rear brake disc contaminated by oil |3.5.1h|2
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|2
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))2
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))2
Horn not working (7.7 (a) (ii))2
Offside Front Service brake excessively binding (1.2.1 (f))2
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))2
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))2
Nearside Rear wheel cylinder leaking |3.6.A.1|1
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b|1
Nearside Front wheel cylinder leaking |3.6.A.1|1
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Rear Direction indicator incorrect colour |1.4.A.2f|1
Offside Rear Direction indicator incorrect colour |1.4.A.2f|1
Nearside Rear brake disc excessively pitted |3.5.1h|1
Offside Rear brake disc excessively pitted |3.5.1h|1
Central Exhaust has a major leak of exhaust gases pipe |7.1.2|1
Headlamp aim beam image obviously incorrect offside and nearside |1.8.A.1b|1
Mechanical brake component has restricted free movement1
Offside Front Wheel nut|s| missing |4.2.A.1e|1
Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Rear Rear fog lamp emits a light other than red |1.3.2e|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Rear Wheel nut|s| missing |4.2.A.1e|1
Nearside Stop lamp not working |1.2.1b|1
Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3|1
Offside Front Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under sill |6.1.B.2|1
Offside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Exhaust silencer likely to become detached back box |8.1.1 |b| |ii||1
Offside Rear Lower Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i||1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s lower outer sill |6.1.B.2|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s, under side of vehicle inner sill |6.1.B.2|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s under side of vehicle inner sill |6.1.B.2|1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Offside Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Nearside Rear Statutory seat belt missing |5.1.1|1
Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings & centre sill |6.1.B.2|1
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill |6.1.B.2|1
Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded center |5.2.6|1
Offside Front Inner Subframe mounting prescribed area is excessively corroded sill |2.4.A.3|1
Offside Front Inner Seat belt anchorage prescribed area is excessively corroded center |5.2.6|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Rear Anti-roll bar has excessive play in a ball joint |2.4.G.2|1
Offside Rear Anti-roll bar has excessive play in a ball joint |2.4.G.2|1
Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Rear Exhaust has a part missing |7.1.1a|1
Nearside Front Wheel bearing rough when rotated |5.1.3 |b| |i||1
Nearside Front Position lamp not working |4.2.1 |a||1
Nearside Rear Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i||1
Offside Rear Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i||1
Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii||1
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2|1
Offside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2|1
Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Front Outer Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a|1
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a|1
Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a|1
Nearside Rear Position lamp not working |4.2.1 |a| |ii||1
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength crossmember holed/corroded |5.3.6 |a| |i||1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember holed/corroded |5.3.6 |a| |i||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear crossmember holed. |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember holed |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch and chassis area holed |5.3.6 |a| |i||1
Offside Rear Anti-roll bar attachment bracket/mounting insecure and impairing directional stability bracket broken and bush missing |5.3.3 |a| |ii||1
Offside Rear fog lamp not working |4.5.1 |a| |ii||1
Offside Rear Anti-roll bar attachment bracket/mounting fractured |5.3.3 |b| |ii||1
Offside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||1
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||1
Nearside Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6|1
Offside Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6|1
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|1
Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt Marked in yellow chalk |2.1.3 |g| |ii||1
Nearside Rear Anti-roll bar attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1|1
Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Offside Steering rack gaiter split |2.2.D.2d|1
Offside Rear Stop lamp not working |1.2.1b|1
Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b|1
Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b|1
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2|1
Offside Rear fog lamp emits a light other than red |1.3.2e|1
Brake performance not tested |3.7.A.1|1
Offside Rear Upper Anti-roll bar linkage insecure |2.4.G.1|1
Rear Rear fog lamp missing |1.3.2a|1
Offside Rear Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance |1.3.2d|1
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3|1
Offside Front Shock absorber has a serious fluid leak |2.7.3|1
Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|1
Offside Front Front constant velocity joint gaiter split |2.5.C.1a|1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||1
Offside Headlamp light intensity severely reduced |4.1.4 |a||1
Offside Front Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3|1
Offside Suspension component mounting prescribed area is excessively corroded inner sill panel... |2.4.A.3|1
Offside Power steering component|s| leaking from a failed joint |2.3.3b|1
Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Steering component mounting prescribed area is excessively corroded |2.2.C.1h|1
Nearside Subframe mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Front Lower Suspension arm locating pin locking device missing |2.4.G.3b|1
Offside Front Anti-roll bar missing |2.4.G.1|1
Nearside Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c|1
Offside Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c|1
Emissions not tested |7.4.B.1|1
Electrical wiring insecure |1.9.2a|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Rear Rear fog lamp missing |4.5.1 |a| |ii||1
Nearside Front Headlamp aim projected beam image is obviously incorrect |4.1.2 |c||1
Offside Front Lower Suspension arm corroded and seriously weakened |5.3.3 |b| |i||1
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||1
Offside Rear Seat belt insecurely fixed to the vehicles structure Buckle bolt loose |5.2.1a|1
Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2|1
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill in front of wheel arch |6.1.B.2|1
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill |6.1.B.2|1
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Inner sill |6.1.B.2|1
Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill behind bumper has a hole |6.1.B.2|1
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill has holes |6.1.B.2|1
Offside Front Battery insecure |1.9.1|1
Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Front brake application uneven1
Nearside Front Front position lamp|s| not working |1.1.A.3b|1
Rear brake disc excessively pitted |3.5.1h|1
Rear Exhaust has part of the system excessively deteriorated |7.1.1a|1
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||1
Nearside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i||1
Offside Front Anti-roll bar linkage ball joint excessively worn |5.3.4 |a| |i||1
Offside Stop lamp|s| not working |4.3.1 |a| |ii||1
Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner sill by |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded Inner sill by |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded Outer sill |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded Outer sill |2.4.A.3|1
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting Inner Quarter panel |6.6.6|1
Nearside Rear Upper Seat belt anchorage prescribed area is excessively corroded Inner wing |5.2.6|1
Offside Rear Upper Seat belt anchorage prescribed area is excessively corroded Inner wing |5.2.6|1
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Inner quarter panel |5.2.6|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded Inner quarter panel |5.2.6|1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded Outer quarter panel |5.2.6|1
Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3|1
Anti-lock braking system warning lamp indicates an ABS fault1
Offside Headlamp does not operate immediately when selected on dipped beam |1.7.4a|1
Offside Headlamp does not operate immediately when selected on main beam |1.7.4a|1
Nearside Rear Anti-roll bar insecure |2.4.G.1|1
Nearside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1|1
Offside Headlamp not working on dipped beam |1.7.5a|1
Offside Headlamp not working on main beam |1.7.5a|1
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|1
Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|1
Nearside Rear brake disc excessively scored |3.5.1h|1
Nearside Outer Front Steering rack gaiter split |2.2.D.2d|1
Offside Outer Front Steering rack gaiter split |2.2.D.2d|1
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|1
Nearside Front Anti-roll bar synthetic bush deteriorated resulting in excessive movement |2.4.G.2|1
Central Rear fog lamp not working |1.3.2b|1
Central Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6|1
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6|1
Nearside Outer Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Offside Outer Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Front Seat belt damaged sufficient to significantly weakened the webbing |5.2.2a|1
Anti-lock braking system warning lamp does not illuminate |3.4.1b|1
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i||1
Front Exhaust has a major leak of exhaust gases |7.1.2|1
Rear fog lamp insecure |1.3.2a|1
Offside front brake binding |3.7.B.1|1
Nearside Front Side repeater not working |1.4.A.2c|1
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Rear Stop lamp not working |1.2.1b|1
Offside Side repeater not working |1.4.A.2c|1
Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|1
Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2|1
Nearside Front Front wheel bearing has excessive play |2.5.A.3c|1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i||1
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill under van |7.1.1 |a| |i||1
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill under van |7.1.1 |a| |i||1
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill under van |7.1.1 |a| |i||1
Offside Rear Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Rear Rear fog lamp not working |4.5.1 |a| |ii||1
All position lamps not working all position lamps not working |4.2.1 |a||1
Exhaust has a major leak of exhaust gases rear section |6.1.2 |a||1
Offside Rear Suspension rod pin or bush excessively worn "D" bush worn to excess |5.3.4 |a| |i||1
Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill to floor holed |6.2.2 |d| |i||1
Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting rear cross member holed and corroded |6.2.2 |d| |i||1
Offside Front Headlamp light intensity severely reduced |4.1.4 |a||1
Offside Front Headlamp not working on main beam |4.1.1 |a| |ii||1
Offside Rear Position lamp not working |4.2.1 |a||1
Steering wheel has movement relative to the column indicating looseness |2.2.1 |a| |i||1
Nearside Front Front position lamp|s| not working side light |1.1.A.3b|1
Offside Front Direction indicator not working |1.4.A.2c|1
Central Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member |6.1.B.2|1
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill inner sill outer |6.1.B.2|1
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill inner sill outer |6.1.B.2|1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2|1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2|1
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|1
Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|1
Nearside Steering rack gaiter split |2.2.D.2d|1
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6|1
Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a|1
Centre Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Centre Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Rear Rear fog lamp insecure |1.3.2a|1
Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2|1
Nearside Front Front wheel bearing rough when rotated |2.5.A.2|1
Nearside Headlamp aim projected beam image is obviously incorrect kicks up to the right (4.1.2 (c))1
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))1
Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Door sill corroded & holed (6.1.1 (c) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer chassis leg (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer chassis leg (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area is inadequately repaired Inner sill (5.3.6 (a) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))1
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))1
Offside Front Road wheel fixing missing (5.2.1 (a) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind wheel (6.1.1 (c) (i))1
Offside Rear Suspension component missing axle bump stop (5.3.3 (a) (ii))1
Nearside Front Side repeater not working (4.4.1 (a) (ii))1
Nearside Rear Body component insecure (6.2.1 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill section (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))1
Passengers seat insecure (6.2.6 (a) (ii))1
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))1
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i))1
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i))1
Offside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii))1
Offside Rear fog lamp not working (4.5.1 (a) (ii))1
Offside Rear fog lamp likely to become detached (4.5.1 (c) (ii))1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch (5.3.6 (a) (i))1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))1
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i))1
Offside Front Service brake excessively binding wheel bearing not rotated (1.2.1 (f))1
Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced lower front cross member by radiator mount with in 30 cm of subframe bolt (6.1.1 (c) (i))1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced lower front cross member by radiator mount with in 30 cm of subframe bolt (6.1.1 (c) (i))1
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced center inn sill corroded (6.1.1 (c) (i))1
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill corroded (6.1.1 (c) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor by inner rear sill (5.3.6 (a) (i))1
Electrical wiring insecure and in contact with sharp edges wiring from nearside battery across bulkhead in engine bay (4.11 (a) (ii))1
Nearside Front Electrical wiring insecure and connectors likely to become disconnected footwell area (4.11 (a) (ii))1
Nearside Front Battery insecure and likely to cause a short circuit (4.13 (a) (ii))1
Offside Front Seat belt anchorage loose seat to floor mounting bolt loose (7.1.1 (b))1
Offside Front Suspension component mounting prescribed area is inadequately repaired inner sill / outrigger / floor/arch area patches are spot welded and held on by what appears to be fibreglass type material (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area is inadequately repaired inner sill /step /outrigger/wheel arch area patches spot welded on and held on by what appears to be a fibreglass type material (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/step/ outrigger/wheel arch area (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/step/outrigger/wheel arch area (5.3.6 (a) (i))1
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded and holed (7.1.1 (a) (i))1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded and holed (7.1.1 (a) (i))1
Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner sill /wheel arch/outrigger area at suspension arm mount area (5.3.6 (a) (i))1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill / wheel arch /outrigger area at suspension arm mount area (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch / front panel (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/front panel (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg/front crossmember area (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg/front crossmember area (5.3.6 (a) (i))1
Nearside Front Suspension component mounting prescribed area is inadequately repaired chassis leg/front crossmember area (5.3.6 (a) (i))1
Offside Front Suspension component mounting prescribed area is inadequately repaired chassis leg/front crossmember area (5.3.6 (a) (i))1
Nearside Rear Towbar with an unsafe modification to secondary components Plate tack welded to area where towbar mounts to chassis ,area obviously badly corroded and holed (6.1.6 (g) (i))1
Offside Rear Towbar with an unsafe modification to secondary components plate tack welded on to area where towbar mounts to chassis, area obviously corroded and holed (6.1.6 (g) (i))1
Offside Front Brake pipe at imminent risk of failure or fracture (1.1.11 (a))1
Brake hose excessively deteriorated1
Offside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii))1
Offside Front Service brake lagging in operation (1.2.1 (d))1
Nearside Front Service brake excessively fluctuating (1.2.1 (e))1
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))1
Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii))1
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii))1
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))1
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy