>
main menu
Use Web App here >

MOT History from tests of diesel MAZDA BONGOs year 2000

Review the list of common MAZDA BONGO failures below or to perform a specific mot history check on your MAZDA then use our popular KnowYourCar service

mot history
Pass percent:58.01%
(The average a diesel MAZDA BONGO year 2000 passes without issue)
Based on:3,184 MOT Tests
Most common failuresNo# failures
Windscreen wiper does not clear the windscreen effectively280
Registration plate lamp issues120
Headlamp aim out of alignment90
Offside Rear fog lamp not working |1.3.2b|79
Rear fog lamp not working |1.3.2b|73
Anti-lock braking system warning lamp indicates an ABS fault41
Nearside Front position lamp|s| not working |1.1.A.3b|39
Brake pipe excessively corroded34
Rear fog lamp not working (4.5.1 (a) (ii))32
Offside Front position lamp|s| not working |1.1.A.3b|32
Rear fog lamp switch missing |1.3.1a|30
Rear fog lamp tell tale not working |1.3.1b|27
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|24
Offside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|23
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|22
Nearside Headlamp not working on dipped beam |1.7.5a|22
Nearside Stop lamp not working |1.2.1b|21
Battery insecure |1.9.1|21
Offside Stop lamp not working |1.2.1b|21
Offside Rear fog lamp missing |1.3.2a|21
Rear fog lamp missing |1.3.2a|20
Offside Rear fog lamp emits a light other than red |1.3.2e|19
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|18
Rear fog lamp tell tale missing |1.3.1b|18
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|17
Rear fog lamp not working |4.5.1 |a| |ii||17
Horn not working |1.6.2a|17
Nearside Front Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|16
Parking brake lever has no reserve travel |3.1.6b|16
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b|16
Rear fog lamp emits a light other than red |1.3.2e|16
Registration plate issues15
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))15
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|15
Nearside Front constant velocity joint gaiter split |2.5.C.1a|15
Windscreen washer not working 15
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b|15
Centre Exhaust system not adequately supported |7.1.1|15
Offside Front Position lamp not working (4.2.1 (a) (ii))14
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))14
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b|14
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|14
Parking brake: efficiency below requirements |3.7.C.1b|14
Nearside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2|14
Rear brake binding14
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|13
Offside Rear Anti-roll bar has excessive play in a pin/bush |2.4.G.2|13
Offside Rear Rear fog lamp not working |1.3.2b|13
Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|13
Offside Headlamp not working on dipped beam |1.7.5a|13
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3|13
Exhaust system not adequately supported |7.1.1|12
Offside Front constant velocity joint gaiter split |2.5.C.1a|12
Offside Rear fog lamp not working (4.5.1 (a) (ii))12
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3|12
Nearside Front Position lamp not working (4.2.1 (a) (ii))11
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|11
Nearside Front Front position lamp|s| not working |1.1.A.3b|11
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))11
Offside Rear Rear fog lamp missing |1.3.2a|10
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|10
Offside Headlamp not working on main beam |1.7.5a|10
Offside Rear Rear fog lamp not working |4.5.1 |a| |ii||10
Nearside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a|10
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))10
Brakes imbalanced across an axle10
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2|10
Nearside Headlamp not working on main beam |1.7.5a|10
Offside Battery insecure |1.9.1|10
Front brake disc in such a condition that it is seriously weakened10
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|9
Nearside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2|9
Offside Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a|9
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2|9
Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a|9
Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a|9
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))9
Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b|8
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|8
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2|8
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2|8
Offside Rear Stop lamp not working |1.2.1b|8
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))8
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2|8
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))8
Service brake: efficiency below requirements |3.7.B.7|8
Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2|8
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|8
Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))8
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b|8
Nearside Front Headlamp not working on dipped beam |1.7.5a|7
Horn not working |7.7 |a| |ii||7
Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|7
Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b|7
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2|7
Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))7
Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))7
Nearside Battery insecure |1.9.1|7
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|7
Horn not working (7.7 (a) (ii))7
Parking brake efficiency below requirements (1.4.2 (a) (i))7
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|6
Exhaust has a major leak of exhaust gases |7.1.2|6
Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c|6
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3|6
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||6
Rear Rear fog lamp not working |1.3.2b|6
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a|6
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2|6
Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|6
Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2|6
Windscreen has damage6
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|6
Offside Headlamp lens seriously defective (4.1.1 (b) (ii))6
Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))6
Offside Rear Direction indicator not working |1.4.A.2c|5
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|5
Offside Rear Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i||5
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))5
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6|5
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i||5
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))5
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|5
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii||5
Nearside Front Headlamp aim projected beam image is obviously incorrect |4.1.2 |c||5
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6|5
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|5
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|5
Front position lamp|s| not working |1.1.A.3b|5
Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2|5
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2|5
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii||5
Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii||5
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))5
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|5
Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|5
Offside Front Anti-roll bar has excessive play in a ball joint |2.4.G.2|5
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))5
Nearside Front Position lamp not working |4.2.1 |a||5
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii||5
Offside Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i||5
Nearside Rear Stop lamp not working |1.2.1b|5
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))5
All position lamps not working |1.1.A.3b|5
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))5
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))5
Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))5
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))5
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))5
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))5
Rear fog lamp does not emit a steady red light (4.5.4 (a))5
Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))5
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))5
Rear fog lamp insecure |1.3.2a|5

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy