Most common failures | No# failures |
---|
Headlamp aim out of alignment | 15 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 7 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 6 |
Registration plate issues | 6 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 4 |
Fairings insecure and likely to impede the steering |2.1.2e| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Front Headlamp aim beam image kick up to the offside |1.6| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Horn not working |1.7.3a| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Brake component is fractured |3.1.5| | 1 |
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Lower Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Centre Front Upper Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Centre Rear Upper Rear position lamp missing |1.1.1a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Stop lamp insecure |1.3.3b| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Nearside Brake lever insecure |3.1.2a| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Centre Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Fuel system component leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Offside Lower Motorcycle structure excessively damaged |6.1.1a| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Nearside Rear Brake component has an inadequate repair |3.1.5| | 1 |
Front suspension assembly component excessively bent |2.3.1| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |