| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 18 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 12 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
| Steering headbearing has excessive free play |2.2.2| | 9 |
| Riders seat insecure |6.2.1a| | 6 |
| Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Front wheel bearings are excessively rough |2.3.5b| | 4 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Rear wheel has a loose wheel nut|s| |4.2.3a| | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
| Nearside Front Direction indicators not working |1.5.1c| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Brake lever cannot be applied smoothly |3.1.3d| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Front suspension assembly component excessively bent |2.3.1| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Registration plate issues | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Nearside Headlamp switch insecure |1.2.4| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Horn is not a constant note |1.7.3c| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 2 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Horn is not continous or uniform |1.7.3c| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Rear Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
| Headlamp damaged and function impaired headlight main beam not working |1.2.3a| | 1 |
| Fuel pipe leaking |7.2.1a| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition Excessive leak at manifold. (8.1.1 (a)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front wheel spindle loose |2.3.5a| | 1 |
| Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Nearside Rear Brake locking device insecure |3.2.A1e| | 1 |
| Front Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
| Offside Position lamp switch insecure |1.1.4b| | 1 |
| Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Nearside Front Position lamp switch insecure |1.1.4b| | 1 |
| Offside Front Position lamp switch does not operate the front and rear position lamps |1.1.4c| | 1 |
| Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Fuel system component leaking |7.2.1a| | 1 |
| Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear wheel has a loose wheel bolt|s| |4.2.3a| | 1 |
| Rear Brake hose fouling |3.2.B3b| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Offside Indicator switch insecure |1.5.4| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Brake lever mounting insecure |3.1.2a| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Fuel system component leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Horn not working |1.7.3a| | 1 |
| Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Nearside Front Indicator switch insecure |1.5.4| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Front Shock absorber has a serious fluid leak forkseals |5.3.2 |b|| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Handlebar handgrip missing |2.1.1c| | 1 |
| Offside Handlebar handgrip missing |2.1.1c| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Stop lamp light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
| Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Offside Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Rear Plate brake test indicates a severely grabbing brake |3.3.B1b| | 1 |
| Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Nearside Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Headlamp aim not tested |1.6| | 1 |