Most common failures | No# failures |
---|
Rear Brake lever has inadequate reserve travel |3.1.3b| | 8 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 4 |
Headlamp aim out of alignment | 4 |
Handlebar mounting clamp loose |2.1.1a| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Exhaust mounting missing |7.1.1c| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake lever cracked |3.1.2c| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Fuel cap missing |7.2.2a| | 1 |
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Rear Brake lever pivots excessively worn |3.1.3a| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear Brake lever excessively damaged |3.2.A1c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Brake hose damaged | 1 |
Horn not working |1.7.3a| | 1 |
Indicator switch defective |1.5.4| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Rear wheel insecure |4.2.3b| | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Shock absorber has a serious fluid leak left (5.3.2 (b)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |