MOT History from tests of petrol LIFAN LFs year 2006

Review the list of common LIFAN LF failures below or to perform a specific mot history check on your LIFAN then use our popular KnowYourCar service

mot history

Pass percent:59.90%

(The average a petrol LIFAN LF year 2006 passes without issue)

Based on:1,242 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	117
Rear reflector on motorcycle missing \|1.4.1\|	67
Drive chain excessively loose \|6.2.1d\|	41
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	32
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	31
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	29
Drive chain worn to excess \|6.2.1e\|	26
Registration plate issues	26
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	25
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	21
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	20
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	20
Horn not working \|1.7.3a\|	18
Rear Wheel spoke excessively loose \|4.2.1b\|	17
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	15
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	14
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	14
Rear wheel bearings have excessive free play \|2.4.A.2c\|	13
Front Wheel spoke excessively loose \|4.2.1b\|	12
Drive chain excessively tight \|6.2.1d\|	12
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	11
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	11
Rear Drive chain sprocket worn to excess \|6.2.1e\|	11
Brake hose excessively deteriorated	11
Rear Direction indicator incorrect colour \|1.5.1b\|	11
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	10
Offside Rear Footrest missing \|6.2.1a\|	10
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	10
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	10
Direction indicators affected by the operation of another lamp \|1.5.1c\|	9
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	9
Front Direction indicator incorrect colour \|1.5.1b\|	9
Direction indicator incorrect colour \|1.5.1b\|	9
Offside Rear Direction indicator incorrect colour \|1.5.1b\|	9
Headlamp aim beam image kick up to the offside \|1.6\|	8
Offside Front Direction indicator incorrect colour \|1.5.1b\|	8
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	7
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	7
Brake pedal has inadequate reserve travel \|3.1.3b\|	7
Nearside Rear Direction indicator incorrect colour \|1.5.1b\|	7
Nearside Rear Footrest missing \|6.2.1a\|	7
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	6
Front Roller brake test indicates a binding brake \|3.3.A1a\|	6
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	6
Offside Rear Direction indicators not working \|1.5.1c\|	6
Stop lamp affected by the operation of another lamp \|1.3.2\|	6
Rear Footrest missing \|6.2.1a\|	6
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	6
Fairings insecure and likely to impede the steering \|2.1.2e\|	6
Handlebar mounting clamp bolt loose \|2.1.1a\|	6
Exhaust is leaking and excessively noisey \|7.1.1b\|	6
Steering headbearing has excessive free play \|2.2.2\|	6
Nearside Front Direction indicator incorrect colour \|1.5.1b\|	6
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	6
Front wheel bearings have excessive free play \|2.3.5b\|	5
Rear Wheel spoke cracked. \|4.2.1b\|	5
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	5
Nearside Front Direction indicators not working \|1.5.1c\|	5
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	5
Fuel cap does not fasten securely maintaining the sealing arrangement \|7.2.2b\|	5
Throttle operating incorrectly \|6.2.1f\|	5
Riders seat insecure \|6.2.1a\|	5
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	5
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	5
Rear Rear reflector on motorcycle missing \|1.4.1\|	4
Rear Brake locking device missing \|3.2.A1e\|	4
Direction indicators not working \|1.5.1c\|	4
Drive chain sprocket carrier worn to excess \|6.2.1e\|	4
Rear Brake locking device insecure \|3.2.A1e\|	4
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	4
Brake performance not tested \|3.3\|	4
Direction indicators flashing less than 60 times a minute \|1.5.1c\|	4
Offside Front Direction indicators not working \|1.5.1c\|	4
Front Brake lever has inadequate reserve travel \|3.1.3b\|	4
Rear wheel rotation likely to be impeded \|6.2.1b\|	4
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	4
Headlamp insecure \|1.2.3b\|	4
Front Stop lamp remains on when the brake is released \|1.3.1e\|	3
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	3
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	3
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking \|6.1.1c\|	3
Nearside Rear Direction indicators not working \|1.5.1c\|	3
Rear mono-shock pivot excessively worn \|2.4.B.4\|	3
Nearside Front Direction indicator not working \|1.5.1c\|	3
Offside Front Footrest insecure \|6.2.1a\|	3
Brake hose damaged	3
Rear Brake reaction bracket securing bolt\|s\| loose \|3.2.A1j\|	3
Brake lever has inadequate reserve travel \|3.1.3b\|	3
Headlamp switch faulty \|1.2.4\|	3
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	3
Rear Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	3
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	3
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	3
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	3
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	3
Offside Rear Direction indicator not working \|1.5.1c\|	3
Centre Rear Rear reflector on motorcycle missing \|1.4.1\|	3
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	3
Rear Direction indicators not working \|1.5.1c\|	3
Stop lamp affected by the operation of the horn \|1.3.2\|	3
Nearside Front Handlebar handgrip not secure to handlebars. \|2.1.1c\|	3
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	3
Rear Wheel spoke missing \|4.2.1b\|	3
Chain guard insecure \|6.2.1c\|	3
Front suspension has inadequate damping effect. \|2.3.6c\|	3
Rear position lamp incorrect colour \|1.1.2b\|	2
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	2
Rear Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	2
Headlamp aim headlamp damaged and function impaired \|1.2.3a\|	2
Fuel cap sealing washer deteriorated \|7.2.2c\|	2
Drive chain fouling another component \|6.2.1d\|	2
Front Brake caliper\|s\| insecure \|3.2.A1j\|	2
Front Position lamp switch insecure \|1.1.4b\|	2
Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Brake pedal anti-slip provision missing \|1.1.2 \|c\|\|	2
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	2
Front Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	2
Brake pedal is positioned so that the brake cannot be readily applied \|3.1.3c\|	2
Rear suspension movement is excessively stiff \|2.4.A.3b\|	2
Brake pedal is bent and the brake cannot be readily applied \|3.1.3c\|	2
Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Rear Drive chain worn to excess \|6.2.1e\|	2
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Rear Drive chain sprocket carrier worn to excess \|6.2.1e\|	2
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
Offside Footrest insecure \|6.2.1a\|	2
Stop lamp emits other than a steady red light \|1.3.1b\|	2
Handlebar deformed \|2.1.1b\|	2
Front suspension assembly component excessively misaligned \|2.3.1\|	2
Rear Footrest insecure \|6.2.1a\|	2
Rear Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Nearside Rear Lower Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	2
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Front Front wheel bearings have excessive free play \|2.3.5b\|	2
Rear Exhaust mounting missing \|7.1.1c\|	2
Fuel cap does not fasten securely by a positive means \|7.2.2b\|	2
Drive chain sprocket worn to excess \|6.2.1e\|	2
Rear Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2
Front Front wheel bearings are excessively rough \|2.3.5b\|	2
Nearside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Offside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Front Steering headbearing has excessive free play \|2.2.2\|	2
Rear Drive chain excessively loose \|6.2.1d\|	2
Front position lamp adversely affected by the operation of another lamp \|1.1.3b\|	2
Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	2
Front Brake lever cannot be applied smoothly \|3.1.3d\|	2
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	2
Rear Wheel has an excessively distorted bead rim. \|4.2.2\|	2
Nearside Rear Direction indicator not working \|1.5.1c\|	2
Horn control defective \|1.7.2a\|	2
Indicator switch insecure \|1.5.4\|	2
Position lamp switch insecure \|1.1.4b\|	2
Brake reaction bracket insecure \|3.2.A1j\|	2
Steering control handlebar movement restricted by trapped cables \|2.1.2c\|	2
Rear Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	2
Rear Rear suspension component loose \|2.4.A.1a\|	2
Headlamp aim not tested \|1.6\|	2
Nearside Steering lock stop missing \|2.1.3\|	2
Offside Steering lock stop missing \|2.1.3\|	2
Rear reflector on motorcycle incorrectly positioned \|1.4.2d\|	2
Nearside Handlebar grip insecure to handlebar \|2.2.1 \|d\| \|ii\|\|	2
Rear Brake pedal cannot be released smoothly \|3.1.3d\|	2
Fuel system component leaking \|7.2.1a\|	2
Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Direction indicator flashing less than 60 times a minute \|1.5.1c\|	2
Exhaust excessively deteriorated \|7.1.1a\|	2
Centre Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Offside Front Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Rear Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	2
Stop lamp remains on when the brake is released \|1.3.1e\|	2
Drive chain horseshoe locking device incorrectly fitted \|6.1.7 \|j\| \|i\|\|	2
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))	2
Rear reflector missing (4.8.2 (a) (ii))	2
Central Rear Rear reflector missing (4.8.2 (a) (ii))	2
Offside Front Direction indicator not working (4.4.1 (a) (ii))	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	117
Rear reflector on motorcycle missing \|1.4.1\|	67
Drive chain excessively loose \|6.2.1d\|	41
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	32
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	31
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	29
Drive chain worn to excess \|6.2.1e\|	26
Registration plate issues	26
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	25
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	21
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	20
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	20
Horn not working \|1.7.3a\|	18
Rear Wheel spoke excessively loose \|4.2.1b\|	17
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	15
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	14
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	14
Rear wheel bearings have excessive free play \|2.4.A.2c\|	13
Front Wheel spoke excessively loose \|4.2.1b\|	12
Drive chain excessively tight \|6.2.1d\|	12
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	11
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	11
Rear Drive chain sprocket worn to excess \|6.2.1e\|	11
Brake hose excessively deteriorated	11
Rear Direction indicator incorrect colour \|1.5.1b\|	11
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	10
Offside Rear Footrest missing \|6.2.1a\|	10
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	10
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	10
Direction indicators affected by the operation of another lamp \|1.5.1c\|	9
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	9
Front Direction indicator incorrect colour \|1.5.1b\|	9
Direction indicator incorrect colour \|1.5.1b\|	9
Offside Rear Direction indicator incorrect colour \|1.5.1b\|	9
Headlamp aim beam image kick up to the offside \|1.6\|	8
Offside Front Direction indicator incorrect colour \|1.5.1b\|	8
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	7
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	7
Brake pedal has inadequate reserve travel \|3.1.3b\|	7
Nearside Rear Direction indicator incorrect colour \|1.5.1b\|	7
Nearside Rear Footrest missing \|6.2.1a\|	7
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	6
Front Roller brake test indicates a binding brake \|3.3.A1a\|	6
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	6
Offside Rear Direction indicators not working \|1.5.1c\|	6
Stop lamp affected by the operation of another lamp \|1.3.2\|	6
Rear Footrest missing \|6.2.1a\|	6
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	6
Fairings insecure and likely to impede the steering \|2.1.2e\|	6
Handlebar mounting clamp bolt loose \|2.1.1a\|	6
Exhaust is leaking and excessively noisey \|7.1.1b\|	6
Steering headbearing has excessive free play \|2.2.2\|	6
Nearside Front Direction indicator incorrect colour \|1.5.1b\|	6
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	6
Front wheel bearings have excessive free play \|2.3.5b\|	5
Rear Wheel spoke cracked. \|4.2.1b\|	5
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	5
Nearside Front Direction indicators not working \|1.5.1c\|	5
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	5
Fuel cap does not fasten securely maintaining the sealing arrangement \|7.2.2b\|	5
Throttle operating incorrectly \|6.2.1f\|	5
Riders seat insecure \|6.2.1a\|	5
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	5
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	5
Rear Rear reflector on motorcycle missing \|1.4.1\|	4
Rear Brake locking device missing \|3.2.A1e\|	4
Direction indicators not working \|1.5.1c\|	4
Drive chain sprocket carrier worn to excess \|6.2.1e\|	4
Rear Brake locking device insecure \|3.2.A1e\|	4
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	4
Brake performance not tested \|3.3\|	4
Direction indicators flashing less than 60 times a minute \|1.5.1c\|	4
Offside Front Direction indicators not working \|1.5.1c\|	4
Front Brake lever has inadequate reserve travel \|3.1.3b\|	4
Rear wheel rotation likely to be impeded \|6.2.1b\|	4
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	4
Headlamp insecure \|1.2.3b\|	4
Front Stop lamp remains on when the brake is released \|1.3.1e\|	3
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	3
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	3
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking \|6.1.1c\|	3
Nearside Rear Direction indicators not working \|1.5.1c\|	3
Rear mono-shock pivot excessively worn \|2.4.B.4\|	3
Nearside Front Direction indicator not working \|1.5.1c\|	3
Offside Front Footrest insecure \|6.2.1a\|	3
Brake hose damaged	3
Rear Brake reaction bracket securing bolt\|s\| loose \|3.2.A1j\|	3
Brake lever has inadequate reserve travel \|3.1.3b\|	3
Headlamp switch faulty \|1.2.4\|	3
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	3
Rear Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	3
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	3
Roller brake test Neither brake control achieves an efficiency of 25% \|3.3.A2b\|	3
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	3
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	3
Offside Rear Direction indicator not working \|1.5.1c\|	3
Centre Rear Rear reflector on motorcycle missing \|1.4.1\|	3
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	3
Rear Direction indicators not working \|1.5.1c\|	3
Stop lamp affected by the operation of the horn \|1.3.2\|	3
Nearside Front Handlebar handgrip not secure to handlebars. \|2.1.1c\|	3
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	3
Rear Wheel spoke missing \|4.2.1b\|	3
Chain guard insecure \|6.2.1c\|	3
Front suspension has inadequate damping effect. \|2.3.6c\|	3
Rear position lamp incorrect colour \|1.1.2b\|	2
Rear Stop lamp affected by the operation of another lamp \|1.3.2\|	2
Rear Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	2
Headlamp aim headlamp damaged and function impaired \|1.2.3a\|	2
Fuel cap sealing washer deteriorated \|7.2.2c\|	2
Drive chain fouling another component \|6.2.1d\|	2
Front Brake caliper\|s\| insecure \|3.2.A1j\|	2
Front Position lamp switch insecure \|1.1.4b\|	2
Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Brake pedal anti-slip provision missing \|1.1.2 \|c\|\|	2
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	2
Front Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	2
Brake pedal is positioned so that the brake cannot be readily applied \|3.1.3c\|	2
Rear suspension movement is excessively stiff \|2.4.A.3b\|	2
Brake pedal is bent and the brake cannot be readily applied \|3.1.3c\|	2
Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Rear Drive chain worn to excess \|6.2.1e\|	2
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Rear Drive chain sprocket carrier worn to excess \|6.2.1e\|	2
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
Offside Footrest insecure \|6.2.1a\|	2
Stop lamp emits other than a steady red light \|1.3.1b\|	2
Handlebar deformed \|2.1.1b\|	2
Front suspension assembly component excessively misaligned \|2.3.1\|	2
Rear Footrest insecure \|6.2.1a\|	2
Rear Direction indicator affected by the operation of another lamp \|1.5.1c\|	2
Nearside Rear Lower Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	2
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Front Front wheel bearings have excessive free play \|2.3.5b\|	2
Rear Exhaust mounting missing \|7.1.1c\|	2
Fuel cap does not fasten securely by a positive means \|7.2.2b\|	2
Drive chain sprocket worn to excess \|6.2.1e\|	2
Rear Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	2
Front wheel bearings are excessively rough \|2.3.5b\|	2
Front Front wheel bearings are excessively rough \|2.3.5b\|	2
Nearside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Offside Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Front Steering headbearing has excessive free play \|2.2.2\|	2
Rear Drive chain excessively loose \|6.2.1d\|	2
Front position lamp adversely affected by the operation of another lamp \|1.1.3b\|	2
Steering movement excessively stiff with the weight on the lower bearing \|2.2.1a\|	2
Front Brake lever cannot be applied smoothly \|3.1.3d\|	2
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	2
Rear Wheel has an excessively distorted bead rim. \|4.2.2\|	2
Nearside Rear Direction indicator not working \|1.5.1c\|	2
Horn control defective \|1.7.2a\|	2
Indicator switch insecure \|1.5.4\|	2
Position lamp switch insecure \|1.1.4b\|	2
Brake reaction bracket insecure \|3.2.A1j\|	2
Steering control handlebar movement restricted by trapped cables \|2.1.2c\|	2
Rear Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	2
Rear Rear suspension component loose \|2.4.A.1a\|	2
Headlamp aim not tested \|1.6\|	2
Nearside Steering lock stop missing \|2.1.3\|	2
Offside Steering lock stop missing \|2.1.3\|	2
Rear reflector on motorcycle incorrectly positioned \|1.4.2d\|	2
Nearside Handlebar grip insecure to handlebar \|2.2.1 \|d\| \|ii\|\|	2
Rear Brake pedal cannot be released smoothly \|3.1.3d\|	2
Fuel system component leaking \|7.2.1a\|	2
Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Direction indicator flashing less than 60 times a minute \|1.5.1c\|	2
Exhaust excessively deteriorated \|7.1.1a\|	2
Centre Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Offside Front Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Rear Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	2
Stop lamp remains on when the brake is released \|1.3.1e\|	2
Drive chain horseshoe locking device incorrectly fitted \|6.1.7 \|j\| \|i\|\|	2
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))	2
Rear reflector missing (4.8.2 (a) (ii))	2
Central Rear Rear reflector missing (4.8.2 (a) (ii))	2
Offside Front Direction indicator not working (4.4.1 (a) (ii))	2

MOT History from tests of petrol LIFAN LFs year 2006

Find us on Facebook